From a13110a99fffb431db60ec5b50e263d0bd2b811d Mon Sep 17 00:00:00 2001 From: Klaus Goger Date: Fri, 7 Apr 2017 19:13:38 +0200 Subject: rockchip: ARM64: split RK3399-Q7 board off the RK3399-EVB board The RK3399-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230 connector) system-on-module from Theobroma Systems, featuring the Rockchip RK3399. It provides the following feature set: * up to 4GB DDR3 * on-module SPI-NOR flash * on-module eMMC (with 8-bit interace) * SD card (on a baseboad) via edge connector * Gigabit Ethernet w/ on-module Micrel KSZ9031 GbE PHY * HDMI/eDP/MIPI displays * 2x MIPI-CSI * USB - 1x USB 3.0 dual-role (direct connection) - 2x USB 3.0 host + 1x USB 2.0 (on-module USB 3.0 hub) * on-module STM32 Cortex-M0 companion controller, implementing: - low-power RTC functionality (ISL1208 emulation) - fan controller (AMC6821 emulation) - USB<->CAN bridge controller Note that we use a multi-payload FIT image for booting and have Cortex-M0 payload in a separate subimage: we thus rely on the FIT image loader to put it into the SRAM region that ATF expects it in. Signed-off-by: Klaus Goger Signed-off-by: Philipp Tomsich Fixed build warning on puma-rk3399: Signed-off-by: Simon Glass Reviewed-by: Simon Glass --- configs/puma-rk3399_defconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'configs/puma-rk3399_defconfig') diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig index d4e12d78db..500f22093e 100644 --- a/configs/puma-rk3399_defconfig +++ b/configs/puma-rk3399_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_ROCKCHIP=y +CONFIG_TARGET_PUMA_RK3399=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SYS_MALLOC_F_LEN=0x4000 @@ -11,7 +12,7 @@ CONFIG_DEFAULT_DEVICE_TREE="rk3399-puma" CONFIG_FIT=y CONFIG_SPL_FIT=y CONFIG_SPL_LOAD_FIT=y -CONFIG_SPL_FIT_SOURCE="board/rockchip/evb_rk3399/fit_spl_atf.its" +CONFIG_SPL_FIT_SOURCE="board/theobroma-systems/puma_rk3399/fit_spl_atf.its" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set # CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set -- cgit v1.2.1