From 7e780369e43ebf5c9e337dfad84dd36b2a08a21f Mon Sep 17 00:00:00 2001 From: wdenk Date: Thu, 8 Apr 2004 22:31:29 +0000 Subject: * Patch by Mark Jonas: Remove config.tmp files only when unconfiguring the board * Adapt RMU board for bigger flash memory * Test fix for ethernet problems on MPC5200 --- cpu/mpc8xx/start.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'cpu/mpc8xx/start.S') diff --git a/cpu/mpc8xx/start.S b/cpu/mpc8xx/start.S index 3ebcab46ae..33a3f6c88e 100644 --- a/cpu/mpc8xx/start.S +++ b/cpu/mpc8xx/start.S @@ -27,12 +27,12 @@ * * The processor starts at 0x00000100 and the code is executed * from flash. The code is organized to be at an other address - * in memory, but as long we don't jump around before relocating. + * in memory, but as long we don't jump around before relocating, * board_init lies at a quite high address and when the cpu has * jumped there, everything is ok. * This works because the cpu gives the FLASH (CS0) the whole * address space at startup, and board_init lies as a echo of - * the flash somewhere up there in the memorymap. + * the flash somewhere up there in the memory map. * * board_init will change CS0 to be positioned at the correct * address and (s)dram will be positioned at address 0 -- cgit v1.2.1