From 87d692295f093c601bca8a497159cf9f07ab36fa Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 12 Sep 2012 19:45:58 +0200 Subject: serial: microblaze: Move serial registration from serial_initialize() Move the registration of xuartlite_serialN_device ports from default serial_initialize() into driver specific function called from serial_initialize(). This slims down the serial_initialize() call to a bare tracker of all possible serial port registration routines in U-Boot. The newly implemented xuartlite_serial_initialize() function, which is implemented inside of the serial_xuartlite driver allows encapsulation of xuartlite_serialN_device within the serial_xuartlite driver itself. Also, remove the exports of xuartlite_serialN_device from include/serial.h as they are no longer needed. This is simply because the implementation of default_serial_console() is wrapped into the serial_xuartlite driver and the default console is picked by CONFIG_SERIAL macro in config file. Signed-off-by: Marek Vasut Cc: Marek Vasut Cc: Tom Rini Cc: Michal Simek --- drivers/serial/serial_xuartlite.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'drivers/serial') diff --git a/drivers/serial/serial_xuartlite.c b/drivers/serial/serial_xuartlite.c index b3bb0669f6..164497e616 100644 --- a/drivers/serial/serial_xuartlite.c +++ b/drivers/serial/serial_xuartlite.c @@ -181,4 +181,20 @@ __weak struct serial_device *default_serial_console(void) return NULL; } + +void uartlite_serial_initialize(void) +{ +#ifdef XILINX_UARTLITE_BASEADDR + serial_register(&uartlite_serial0_device); +#endif /* XILINX_UARTLITE_BASEADDR */ +#ifdef XILINX_UARTLITE_BASEADDR1 + serial_register(&uartlite_serial1_device); +#endif /* XILINX_UARTLITE_BASEADDR1 */ +#ifdef XILINX_UARTLITE_BASEADDR2 + serial_register(&uartlite_serial2_device); +#endif /* XILINX_UARTLITE_BASEADDR2 */ +#ifdef XILINX_UARTLITE_BASEADDR3 + serial_register(&uartlite_serial3_device); +#endif /* XILINX_UARTLITE_BASEADDR3 */ +} #endif /* CONFIG_SERIAL_MULTI */ -- cgit v1.2.1