1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2017 General Electric Company
*
* Based on board/freescale/mx53loco/mx53loco_video.c:
*
* Copyright (C) 2012 Freescale Semiconductor, Inc.
* Fabio Estevam <fabio.estevam@freescale.com>
*/
#include <common.h>
#include <linux/list.h>
#include <asm/gpio.h>
#include <asm/arch/iomux-mx53.h>
#include <linux/fb.h>
#include <ipu_pixfmt.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/imx-regs.h>
#include <asm/io.h>
#include <pwm.h>
#include "ppd_gpio.h"
#define MX53PPD_LCD_POWER IMX_GPIO_NR(3, 24)
static struct fb_videomode const nv_spwg = {
.name = "NV-SPWGRGB888",
.refresh = 60,
.xres = 800,
.yres = 480,
.pixclock = 15384,
.left_margin = 16,
.right_margin = 210,
.upper_margin = 10,
.lower_margin = 22,
.hsync_len = 30,
.vsync_len = 13,
.sync = FB_SYNC_EXT,
.vmode = FB_VMODE_NONINTERLACED
};
void setup_iomux_lcd(void)
{
static const iomux_v3_cfg_t lcd_pads[] = {
MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK,
MX53_PAD_DI0_PIN15__IPU_DI0_PIN15,
MX53_PAD_DI0_PIN2__IPU_DI0_PIN2,
MX53_PAD_DI0_PIN3__IPU_DI0_PIN3,
MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0,
MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1,
MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2,
MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3,
MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4,
MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5,
MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6,
MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7,
MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8,
MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9,
MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10,
MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11,
MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12,
MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13,
MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14,
MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15,
MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16,
MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17,
MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18,
MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19,
MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20,
MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21,
MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22,
MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23,
};
imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
}
static void lcd_enable(void)
{
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
/* Set LDB_DI0 as clock source for IPU_DI0 */
clrsetbits_le32(&mxc_ccm->cscmr2,
MXC_CCM_CSCMR2_DI0_CLK_SEL_MASK,
MXC_CCM_CSCMR2_DI0_CLK_SEL(
MXC_CCM_CSCMR2_DI0_CLK_SEL_LDB_DI0_CLK));
/* Turn on IPU LDB DI0 clocks */
setbits_le32(&mxc_ccm->CCGR6, MXC_CCM_CCGR6_LDB_DI0(3));
/* Turn on IPU DI0 clocks */
setbits_le32(&mxc_ccm->CCGR6, MXC_CCM_CCGR6_IPU_DI0(3));
/* Configure LDB */
writel(IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG |
IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT |
IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0,
&iomux->gpr[2]);
/* Enable backlights */
pwm_init(1, 0, 0);
/* duty cycle 5000000ns, period: 5000000ns */
pwm_config(1, 5000000, 5000000);
/* Backlight Power */
gpio_direction_output(BACKLIGHT_ENABLE, 1);
pwm_enable(1);
}
static int do_lcd_enable(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
{
lcd_enable();
return 0;
}
U_BOOT_CMD(
ppd_lcd_enable, 1, 1, do_lcd_enable,
"enable PPD LCD",
"no parameters"
);
int board_video_skip(void)
{
int ret;
ret = ipuv3_fb_init(&nv_spwg, 0, IPU_PIX_FMT_RGB24);
if (ret)
printf("Display cannot be configured: %d\n", ret);
return ret;
}
|
