1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
|
/*
* (C) Copyright 2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
* Copyright (C) 2006-2009 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <asm/mmu.h>
#include <asm/io.h>
#include <common.h>
#include <mpc83xx.h>
#include <pci.h>
#include <i2c.h>
#include <asm/fsl_i2c.h>
static struct pci_region pci1_regions[] = {
{
bus_start: CONFIG_SYS_PCI1_MEM_BASE,
phys_start: CONFIG_SYS_PCI1_MEM_PHYS,
size: CONFIG_SYS_PCI1_MEM_SIZE,
flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
},
{
bus_start: CONFIG_SYS_PCI1_IO_BASE,
phys_start: CONFIG_SYS_PCI1_IO_PHYS,
size: CONFIG_SYS_PCI1_IO_SIZE,
flags: PCI_REGION_IO
},
{
bus_start: CONFIG_SYS_PCI1_MMIO_BASE,
phys_start: CONFIG_SYS_PCI1_MMIO_PHYS,
size: CONFIG_SYS_PCI1_MMIO_SIZE,
flags: PCI_REGION_MEM
},
};
/*
* pci_init_board()
*
* NOTICE: MPC8349 internally has two PCI controllers (PCI1 and PCI2) but since
* per TQM834x design physical connections to external devices (PCI sockets)
* are routed only to the PCI1 we do not account for the second one - this code
* supports PCI1 module only. Should support for the PCI2 be required in the
* future it needs a separate pci_controller structure (above) and handling -
* please refer to other boards' implementation for dual PCI host controllers,
* for example board/Marvell/db64360/pci.c, pci_init_board()
*
*/
void
pci_init_board(void)
{
volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
struct pci_region *reg[] = { pci1_regions };
u32 reg32;
/*
* Configure PCI controller and PCI_CLK_OUTPUT
*
* WARNING! only PCI_CLK_OUTPUT1 is enabled here as this is the one
* line actually used for clocking all external PCI devices in TQM83xx.
* Enabling other PCI_CLK_OUTPUT lines may lead to board's hang for
* unknown reasons - particularly PCI_CLK_OUTPUT6 and PCI_CLK_OUTPUT7
* are known to hang the board; this issue is under investigation
* (13 oct 05)
*/
reg32 = OCCR_PCICOE1;
#if 0
/* enabling all PCI_CLK_OUTPUT lines HANGS the board... */
reg32 = 0xff000000;
#endif
if (clk->spmr & SPMR_CKID) {
/* PCI Clock is half CONFIG_83XX_CLKIN so need to set up OCCR
* fields accordingly */
reg32 |= (OCCR_PCI1CR | OCCR_PCI2CR);
reg32 |= (OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 \
| OCCR_PCICD3 | OCCR_PCICD4 | OCCR_PCICD5 \
| OCCR_PCICD6 | OCCR_PCICD7);
}
clk->occr = reg32;
udelay(2000);
/* Configure PCI Local Access Windows */
pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M;
pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_16M;
udelay(2000);
mpc83xx_pci_init(1, reg);
}
|
