1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
|
// SPDX-License-Identifier: GPL-2.0+
/*
* ET1011C PHY driver
*
* Derived from Linux kernel driver by Chaithrika U S
* Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/
*/
#include <config.h>
#include <phy.h>
#define ET1011C_CONFIG_REG (0x16)
#define ET1011C_TX_FIFO_MASK (0x3 << 12)
#define ET1011C_TX_FIFO_DEPTH_8 (0x0 << 12)
#define ET1011C_TX_FIFO_DEPTH_16 (0x1 << 12)
#define ET1011C_INTERFACE_MASK (0x7 << 0)
#define ET1011C_GMII_INTERFACE (0x2 << 0)
#define ET1011C_SYS_CLK_EN (0x1 << 4)
#define ET1011C_TX_CLK_EN (0x1 << 5)
#define ET1011C_STATUS_REG (0x1A)
#define ET1011C_DUPLEX_STATUS (0x1 << 7)
#define ET1011C_SPEED_MASK (0x3 << 8)
#define ET1011C_SPEED_1000 (0x2 << 8)
#define ET1011C_SPEED_100 (0x1 << 8)
#define ET1011C_SPEED_10 (0x0 << 8)
static int et1011c_config(struct phy_device *phydev)
{
int ctl = 0;
ctl = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR);
if (ctl < 0)
return ctl;
ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 |
BMCR_ANENABLE);
/* First clear the PHY */
phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, ctl | BMCR_RESET);
return genphy_config_aneg(phydev);
}
static int et1011c_parse_status(struct phy_device *phydev)
{
int mii_reg;
int speed;
mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, ET1011C_STATUS_REG);
if (mii_reg & ET1011C_DUPLEX_STATUS)
phydev->duplex = DUPLEX_FULL;
else
phydev->duplex = DUPLEX_HALF;
speed = mii_reg & ET1011C_SPEED_MASK;
switch (speed) {
case ET1011C_SPEED_1000:
phydev->speed = SPEED_1000;
mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, ET1011C_CONFIG_REG);
mii_reg &= ~ET1011C_TX_FIFO_MASK;
phy_write(phydev, MDIO_DEVAD_NONE, ET1011C_CONFIG_REG,
mii_reg |
ET1011C_GMII_INTERFACE |
ET1011C_SYS_CLK_EN |
#ifdef CONFIG_PHY_ET1011C_TX_CLK_FIX
ET1011C_TX_CLK_EN |
#endif
ET1011C_TX_FIFO_DEPTH_16);
break;
case ET1011C_SPEED_100:
phydev->speed = SPEED_100;
break;
case ET1011C_SPEED_10:
phydev->speed = SPEED_10;
break;
}
return 0;
}
static int et1011c_startup(struct phy_device *phydev)
{
int ret;
ret = genphy_update_link(phydev);
if (ret)
return ret;
return et1011c_parse_status(phydev);
}
static struct phy_driver et1011c_driver = {
.name = "ET1011C",
.uid = 0x0282f014,
.mask = 0xfffffff0,
.features = PHY_GBIT_FEATURES,
.config = &et1011c_config,
.startup = &et1011c_startup,
};
int phy_et1011c_init(void)
{
phy_register(&et1011c_driver);
return 0;
}
|