1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
|
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
*/
enum axp209_reg {
AXP209_POWER_STATUS = 0x00,
AXP209_CHIP_VERSION = 0x03,
AXP209_OUTPUT_CTRL = 0x12,
AXP209_DCDC2_VOLTAGE = 0x23,
AXP209_DCDC3_VOLTAGE = 0x27,
AXP209_LDO24_VOLTAGE = 0x28,
AXP209_LDO3_VOLTAGE = 0x29,
AXP209_IRQ_ENABLE1 = 0x40,
AXP209_IRQ_ENABLE2 = 0x41,
AXP209_IRQ_ENABLE3 = 0x42,
AXP209_IRQ_ENABLE4 = 0x43,
AXP209_IRQ_ENABLE5 = 0x44,
AXP209_IRQ_STATUS5 = 0x4c,
AXP209_SHUTDOWN = 0x32,
};
#define AXP209_POWER_STATUS_ON_BY_DC (1 << 0)
#define AXP209_POWER_STATUS_VBUS_USABLE (1 << 4)
#define AXP209_OUTPUT_CTRL_EXTEN (1 << 0)
#define AXP209_OUTPUT_CTRL_DCDC3 (1 << 1)
#define AXP209_OUTPUT_CTRL_LDO2 (1 << 2)
#define AXP209_OUTPUT_CTRL_LDO4 (1 << 3)
#define AXP209_OUTPUT_CTRL_DCDC2 (1 << 4)
#define AXP209_OUTPUT_CTRL_LDO3 (1 << 6)
#define AXP209_IRQ5_PEK_UP (1 << 6)
#define AXP209_IRQ5_PEK_DOWN (1 << 5)
#define AXP209_POWEROFF (1 << 7)
/* For axp_gpio.c */
#define AXP_POWER_STATUS 0x00
#define AXP_POWER_STATUS_VBUS_PRESENT (1 << 5)
#define AXP_GPIO0_CTRL 0x90
#define AXP_GPIO1_CTRL 0x92
#define AXP_GPIO2_CTRL 0x93
#define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */
#define AXP_GPIO_CTRL_OUTPUT_HIGH 0x01 /* Drive pin high */
#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */
#define AXP_GPIO_STATE 0x94
#define AXP_GPIO_STATE_OFFSET 4
|
