diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/liblzma/api/lzma/container.h | 146 |
1 files changed, 93 insertions, 53 deletions
diff --git a/src/liblzma/api/lzma/container.h b/src/liblzma/api/lzma/container.h index cbd07bb..b47da05 100644 --- a/src/liblzma/api/lzma/container.h +++ b/src/liblzma/api/lzma/container.h @@ -294,6 +294,15 @@ extern LZMA_API(uint64_t) lzma_easy_decoder_memusage(uint32_t preset) * This function is intended for those who just want to use the basic features * if liblzma (that is, most developers out there). * + * If initialization fails (return value is not LZMA_OK), all the memory + * allocated for *strm by liblzma is always freed. Thus, there is no need + * to call lzma_end() after failed initialization. + * + * If initialization succeeds, use lzma_code() to do the actual encoding. + * Valid values for `action' (the second argument of lzma_code()) are + * LZMA_RUN, LZMA_SYNC_FLUSH, LZMA_FULL_FLUSH, and LZMA_FINISH. In future, + * there may be compression levels or flags that don't support LZMA_SYNC_FLUSH. + * * \param strm Pointer to lzma_stream that is at least initialized * with LZMA_STREAM_INIT. * \param preset Compression preset to use. A preset consist of level @@ -308,7 +317,8 @@ extern LZMA_API(uint64_t) lzma_easy_decoder_memusage(uint32_t preset) * unsure. LZMA_CHECK_CRC32 is good too as long as the * uncompressed file is not many gigabytes. * - * \return - LZMA_OK: Initialization succeeded. Use lzma_code() to + * \return Possible lzma_ret values: + * - LZMA_OK: Initialization succeeded. Use lzma_code() to * encode your data. * - LZMA_MEM_ERROR: Memory allocation failed. * - LZMA_OPTIONS_ERROR: The given compression preset is not @@ -317,15 +327,6 @@ extern LZMA_API(uint64_t) lzma_easy_decoder_memusage(uint32_t preset) * supported by this liblzma build. * - LZMA_PROG_ERROR: One or more of the parameters have values * that will never be valid. For example, strm == NULL. - * - * If initialization fails (return value is not LZMA_OK), all the memory - * allocated for *strm by liblzma is always freed. Thus, there is no need - * to call lzma_end() after failed initialization. - * - * If initialization succeeds, use lzma_code() to do the actual encoding. - * Valid values for `action' (the second argument of lzma_code()) are - * LZMA_RUN, LZMA_SYNC_FLUSH, LZMA_FULL_FLUSH, and LZMA_FINISH. In future, - * there may be compression levels or flags that don't support LZMA_SYNC_FLUSH. */ extern LZMA_API(lzma_ret) lzma_easy_encoder( lzma_stream *strm, uint32_t preset, lzma_check check) @@ -346,13 +347,14 @@ extern LZMA_API(lzma_ret) lzma_easy_encoder( * Set to NULL to use malloc() and free(). * \param in Beginning of the input buffer * \param in_size Size of the input buffer - * \param out Beginning of the output buffer - * \param out_pos The next byte will be written to out[*out_pos]. + * \param[out] out Beginning of the output buffer + * \param[out] out_pos The next byte will be written to out[*out_pos]. * *out_pos is updated only if encoding succeeds. * \param out_size Size of the out buffer; the first byte into * which no data is written to is out[out_size]. * - * \return - LZMA_OK: Encoding was successful. + * \return Possible lzma_ret values: + * - LZMA_OK: Encoding was successful. * - LZMA_BUF_ERROR: Not enough output buffer space. * - LZMA_UNSUPPORTED_CHECK * - LZMA_OPTIONS_ERROR @@ -370,14 +372,16 @@ extern LZMA_API(lzma_ret) lzma_easy_buffer_encode( /** * \brief Initialize .xz Stream encoder using a custom filter chain * - * \param strm Pointer to properly prepared lzma_stream + * \param strm Pointer to lzma_stream that is at least initialized + * with LZMA_STREAM_INIT. * \param filters Array of filters. This must be terminated with * filters[n].id = LZMA_VLI_UNKNOWN. See filter.h for * more information. * \param check Type of the integrity check to calculate from * uncompressed data. * - * \return - LZMA_OK: Initialization was successful. + * \return Possible lzma_ret values: + * - LZMA_OK: Initialization was successful. * - LZMA_MEM_ERROR * - LZMA_UNSUPPORTED_CHECK * - LZMA_OPTIONS_ERROR @@ -417,10 +421,12 @@ extern LZMA_API(uint64_t) lzma_stream_encoder_mt_memusage( * LZMA_FULL_BARRIER, and LZMA_FINISH. Support for LZMA_SYNC_FLUSH might be * added in the future. * - * \param strm Pointer to properly prepared lzma_stream + * \param strm Pointer to lzma_stream that is at least initialized + * with LZMA_STREAM_INIT. * \param options Pointer to multithreaded compression options * - * \return - LZMA_OK + * \return Possible lzma_ret values: + * - LZMA_OK * - LZMA_MEM_ERROR * - LZMA_UNSUPPORTED_CHECK * - LZMA_OPTIONS_ERROR @@ -446,7 +452,12 @@ extern LZMA_API(lzma_ret) lzma_stream_encoder_mt( * No kind of flushing is supported, because the file format doesn't make * it possible. * - * \return - LZMA_OK + * \param strm Pointer to lzma_stream that is at least initialized + * with LZMA_STREAM_INIT. + * \param options Pointer to encoder options + * + * \return Possible lzma_ret values: + * - LZMA_OK * - LZMA_MEM_ERROR * - LZMA_OPTIONS_ERROR * - LZMA_PROG_ERROR @@ -477,6 +488,11 @@ extern LZMA_API(lzma_ret) lzma_alone_encoder( * will) have larger maximum expansion when encoding * uncompressible data. Currently there is no function to * calculate the maximum expansion of multi-call encoding. + * + * \param uncompressed_size Size in bytes of the uncompressed + * input data + * + * \return Maximum number of bytes needed to store the compressed data. */ extern LZMA_API(size_t) lzma_stream_buffer_bound(size_t uncompressed_size) lzma_nothrow; @@ -494,13 +510,14 @@ extern LZMA_API(size_t) lzma_stream_buffer_bound(size_t uncompressed_size) * Set to NULL to use malloc() and free(). * \param in Beginning of the input buffer * \param in_size Size of the input buffer - * \param out Beginning of the output buffer - * \param out_pos The next byte will be written to out[*out_pos]. + * \param[out] out Beginning of the output buffer + * \param[out] out_pos The next byte will be written to out[*out_pos]. * *out_pos is updated only if encoding succeeds. * \param out_size Size of the out buffer; the first byte into * which no data is written to is out[out_size]. * - * \return - LZMA_OK: Encoding was successful. + * \return Possible lzma_ret values: + * - LZMA_OK: Encoding was successful. * - LZMA_BUF_ERROR: Not enough output buffer space. * - LZMA_UNSUPPORTED_CHECK * - LZMA_OPTIONS_ERROR @@ -556,7 +573,12 @@ extern LZMA_API(lzma_ret) lzma_stream_buffer_encode( * uses too where many small streams are needed. XZ Embedded includes a * decoder for this format. * - * \return - LZMA_STREAM_END: All good. Check the amounts of input used + * \param strm Pointer to lzma_stream that is at least initialized + * with LZMA_STREAM_INIT. + * \param options Pointer to encoder options + * + * \return Possible lzma_ret values: + * - LZMA_STREAM_END: All good. Check the amounts of input used * and output produced. Store the amount of input used * (uncompressed size) as it needs to be known to decompress * the data. @@ -673,7 +695,8 @@ extern LZMA_API(lzma_ret) lzma_microlzma_encoder( /** * \brief Initialize .xz Stream decoder * - * \param strm Pointer to properly prepared lzma_stream + * \param strm Pointer to lzma_stream that is at least initialized + * with LZMA_STREAM_INIT. * \param memlimit Memory usage limit as bytes. Use UINT64_MAX * to effectively disable the limiter. liblzma * 5.2.3 and earlier don't allow 0 here and return @@ -684,7 +707,8 @@ extern LZMA_API(lzma_ret) lzma_microlzma_encoder( * LZMA_TELL_ANY_CHECK, LZMA_IGNORE_CHECK, * LZMA_CONCATENATED, LZMA_FAIL_FAST * - * \return - LZMA_OK: Initialization was successful. + * \return Possible lzma_ret values: + * - LZMA_OK: Initialization was successful. * - LZMA_MEM_ERROR: Cannot allocate memory. * - LZMA_OPTIONS_ERROR: Unsupported flags * - LZMA_PROG_ERROR @@ -697,9 +721,6 @@ extern LZMA_API(lzma_ret) lzma_stream_decoder( /** * \brief Initialize multithreaded .xz Stream decoder * - * \param strm Pointer to properly prepared lzma_stream - * \param options Pointer to multithreaded compression options - * * The decoder can decode multiple Blocks in parallel. This requires that each * Block Header contains the Compressed Size and Uncompressed size fields * which are added by the multi-threaded encoder, see lzma_stream_encoder_mt(). @@ -713,7 +734,12 @@ extern LZMA_API(lzma_ret) lzma_stream_decoder( * This function behaves like lzma_stream_decoder() when options->threads == 1 * and options->memlimit_threading <= 1. * - * \return - LZMA_OK: Initialization was successful. + * \param strm Pointer to lzma_stream that is at least initialized + * with LZMA_STREAM_INIT. + * \param options Pointer to multithreaded compression options + * + * \return Possible lzma_ret values: + * - LZMA_OK: Initialization was successful. * - LZMA_MEM_ERROR: Cannot allocate memory. * - LZMA_MEMLIMIT_ERROR: Memory usage limit was reached. * - LZMA_OPTIONS_ERROR: Unsupported flags. @@ -740,7 +766,8 @@ extern LZMA_API(lzma_ret) lzma_stream_decoder_mt( * as it doesn't support any decoder flags. It will return LZMA_STREAM_END * after one .lzma stream.) * - * \param strm Pointer to properly prepared lzma_stream + * \param strm Pointer to lzma_stream that is at least initialized + * with LZMA_STREAM_INIT. * \param memlimit Memory usage limit as bytes. Use UINT64_MAX * to effectively disable the limiter. liblzma * 5.2.3 and earlier don't allow 0 here and return @@ -751,7 +778,8 @@ extern LZMA_API(lzma_ret) lzma_stream_decoder_mt( * LZMA_TELL_ANY_CHECK, LZMA_IGNORE_CHECK, * LZMA_CONCATENATED, LZMA_FAIL_FAST * - * \return - LZMA_OK: Initialization was successful. + * \return Possible lzma_ret values: + * - LZMA_OK: Initialization was successful. * - LZMA_MEM_ERROR: Cannot allocate memory. * - LZMA_OPTIONS_ERROR: Unsupported flags * - LZMA_PROG_ERROR @@ -764,18 +792,20 @@ extern LZMA_API(lzma_ret) lzma_auto_decoder( /** * \brief Initialize .lzma decoder (legacy file format) * - * \param strm Pointer to properly prepared lzma_stream + * Valid `action' arguments to lzma_code() are LZMA_RUN and LZMA_FINISH. + * There is no need to use LZMA_FINISH, but it's allowed because it may + * simplify certain types of applications. + * + * \param strm Pointer to lzma_stream that is at least initialized + * with LZMA_STREAM_INIT. * \param memlimit Memory usage limit as bytes. Use UINT64_MAX * to effectively disable the limiter. liblzma * 5.2.3 and earlier don't allow 0 here and return * LZMA_PROG_ERROR; later versions treat 0 as if 1 * had been specified. * - * Valid `action' arguments to lzma_code() are LZMA_RUN and LZMA_FINISH. - * There is no need to use LZMA_FINISH, but it's allowed because it may - * simplify certain types of applications. - * - * \return - LZMA_OK + * \return Possible lzma_ret values: + * - LZMA_OK * - LZMA_MEM_ERROR * - LZMA_PROG_ERROR */ @@ -787,18 +817,6 @@ extern LZMA_API(lzma_ret) lzma_alone_decoder( /** * \brief Initialize .lz (lzip) decoder (a foreign file format) * - * \param strm Pointer to properly prepared lzma_stream - * \param memlimit Memory usage limit as bytes. Use UINT64_MAX - * to effectively disable the limiter. - * \param flags Bitwise-or of flags, or zero for no flags. - * All decoder flags listed above are supported - * although only LZMA_CONCATENATED and (in very rare - * cases) LZMA_IGNORE_CHECK are actually useful. - * LZMA_TELL_NO_CHECK, LZMA_TELL_UNSUPPORTED_CHECK, - * and LZMA_FAIL_FAST do nothing. LZMA_TELL_ANY_CHECK - * is supported for consistency only as CRC32 is - * always used in the .lz format. - * * This decoder supports the .lz format version 0 and the unextended .lz * format version 1: * @@ -832,7 +850,21 @@ extern LZMA_API(lzma_ret) lzma_alone_decoder( * one should ensure that none of the first four bytes of trailing data are * equal to the magic bytes because lzip >= 1.20 requires it by default. * - * \return - LZMA_OK: Initialization was successful. + * \param strm Pointer to lzma_stream that is at least initialized + * with LZMA_STREAM_INIT. + * \param memlimit Memory usage limit as bytes. Use UINT64_MAX + * to effectively disable the limiter. + * \param flags Bitwise-or of flags, or zero for no flags. + * All decoder flags listed above are supported + * although only LZMA_CONCATENATED and (in very rare + * cases) LZMA_IGNORE_CHECK are actually useful. + * LZMA_TELL_NO_CHECK, LZMA_TELL_UNSUPPORTED_CHECK, + * and LZMA_FAIL_FAST do nothing. LZMA_TELL_ANY_CHECK + * is supported for consistency only as CRC32 is + * always used in the .lz format. + * + * \return Possible lzma_ret values: + * - LZMA_OK: Initialization was successful. * - LZMA_MEM_ERROR: Cannot allocate memory. * - LZMA_OPTIONS_ERROR: Unsupported flags * - LZMA_PROG_ERROR @@ -861,13 +893,14 @@ extern LZMA_API(lzma_ret) lzma_lzip_decoder( * *in_pos is updated only if decoding succeeds. * \param in_size Size of the input buffer; the first byte that * won't be read is in[in_size]. - * \param out Beginning of the output buffer - * \param out_pos The next byte will be written to out[*out_pos]. + * \param[out] out Beginning of the output buffer + * \param[out] out_pos The next byte will be written to out[*out_pos]. * *out_pos is updated only if decoding succeeds. * \param out_size Size of the out buffer; the first byte into * which no data is written to is out[out_size]. * - * \return - LZMA_OK: Decoding was successful. + * \return Possible lzma_ret values: + * - LZMA_OK: Decoding was successful. * - LZMA_FORMAT_ERROR * - LZMA_OPTIONS_ERROR * - LZMA_DATA_ERROR @@ -897,7 +930,8 @@ extern LZMA_API(lzma_ret) lzma_stream_buffer_decode( * The lzma_code() usage with this decoder is completely normal. The * special behavior of lzma_code() applies to lzma_microlzma_encoder() only. * - * \param strm Pointer to properly prepared lzma_stream + * \param strm Pointer to lzma_stream that is at least initialized + * with LZMA_STREAM_INIT. * \param comp_size Compressed size of the MicroLZMA stream. * The caller must somehow know this exactly. * \param uncomp_size Uncompressed size of the MicroLZMA stream. @@ -922,6 +956,12 @@ extern LZMA_API(lzma_ret) lzma_stream_buffer_decode( * the implementation in XZ Embedded it doesn't * affect the memory usage if one specifies bigger * dictionary than actually required.) + * + * \return Possible lzma_ret values: + * - LZMA_OK + * - LZMA_MEM_ERROR + * - LZMA_OPTIONS_ERROR + * - LZMA_PROG_ERROR */ extern LZMA_API(lzma_ret) lzma_microlzma_decoder( lzma_stream *strm, uint64_t comp_size, |