diff options
Diffstat (limited to 'ACE/MPC/docs/templates/vc7.txt')
| -rw-r--r-- | ACE/MPC/docs/templates/vc7.txt | 55 |
1 files changed, 55 insertions, 0 deletions
diff --git a/ACE/MPC/docs/templates/vc7.txt b/ACE/MPC/docs/templates/vc7.txt new file mode 100644 index 00000000000..a785b4fe5f6 --- /dev/null +++ b/ACE/MPC/docs/templates/vc7.txt @@ -0,0 +1,55 @@ +// Current as of 8/14/2009 +// This defines the role of all the template variables specific to the +// 'vc7' and 'vc71' project types. +// +// Please try to keep this alphabetically sorted. +// +basicruntimechecks = This corresponds to the C/C++ Code Generation property "Basic Runtime Checks". The numeric value specifies the pull-down value in the IDE. +buffersecuritycheck = This corresponds to the C/C++ Code Generation property "Buffer Security Check". The boolean value specifies the pull-down value in the IDE. +charset = This setting specifies the "Character Set" in the General properties. The values 0, 1, and 2 specify Not Set, Unicode, and Multi-Byte respectively. +common_defines = Specifies macros that are common to all target types. +configuration_type = This corresponds to the General property "Configuration Type". The values 1, 2, 4, and 10 correspond to Application, Dynamic Library, Static Library, and Utility respectively. +culture = This corresponds to the Resources General property "Culture". The numeric value corresponds to the pull-down values in the IDE. +debug_format = This setting specifies the "Debug Information Format" found in the C/C++ General properties. The numeric value specifies the pull-down value in the IDE. +debug_prj = This is an internally used template variable to determine if the configuration originated as "Debug". In the event that the 'optimize' template variable is overridden, debug_prj allows the correct run-time library to be chosen. +defines = Macros that are specific to a particular configuration. +detect64bitportabilityproblems = This corresponds to the C/C++ Code Generation property "Detect 64-bit Portability Issues". The boolean value specifies the pull-down value in the IDE. +disablespecificwarnings = A space separated list of warning numbers to be disabled. +enablefunctionlevellinking = This corresponds to the C/C++ Code Generation property "Enable Function-Level Linking". The boolean value specifies the pull-down value in the IDE. +encoding = Specifies the XML encoding for the generated .vcproj file. +exceptions = This setting corresponds to the C/C++ Code Generation property "Enable C++ Exceptions". The boolean value specifies the pull-down value in the IDE. +fixedbaseaddress = This corresponds to the Linker Advanced property "Fixed Base Address". The values 1 and 2 correspond to Relocatable (not fixed) and Load at a Fixed Address respectively. +forloopscope = This corresponds to the C/C++ Language property "Force Conformance In For Loop Scope". The boolean value specifies the pull-down value in the IDE. +generatemapfile = This corresponds to the Linker Debugging property "Generate Map File". The boolean value specifies the pull-down value in the IDE. +guid = The value for this variable is generated during project generation. +ignore_default_library_names = The value for this is evaluated as a space separated list of default library names to ignore. It corresponds to the Linker Input property "Ignore Specific Library". +ignorealldefaultlibraries = Ignore all default libraries during linking. +inlinefunctionexpansion = This corresponds to the C/C++ Optimization property "Inline Function Expansion". A value of 1 indicates /Ob1 (inline only those designated to be inlined). A value of 2 indicates /Ob2 (inline any suitable function). +link_options = Allows passing arbitrary options to the linker. +linkincremental = This setting corresponds to the Linker General property "Enable Incremental Linking". The values 1 and 2 correspond to NO and YES respectively. +machine = This corresponds to the Linker Advanced property "Target Machine". The numeric value corresponds to the pull-down values in the IDE. +midl_defines = Macros specified here correspond to the MIDL General property "Preprocessor Definitions". +midl_flags = The value for this variable is passed to the MIDL command as "Additional Options". +midl_includes = This correspond to the MIDL General property "Additional Include Directories". +midl_notlb = Suppresses the creation of a type library for the IDL file. +minimalrebuild = This corresponds to the C/C++ Code Generation property "Enable Minimal Rebuild". The boolean value specifies the pull-down value in the IDE. +moduledefinitionfile = This setting corresponds to the Linker Input property "Module Definition File". +opticf = This corresponds to the Linker Optimization property "Enable COMDAT Folding". The value 1 corresponds to "Do Not Remove Redundant COMDATs" and 2 corresponds to "Remove Redundant COMDATs". +optref = This corresponds to the Linker Optimization property "References". The value 1 corresponds to "Keep Unreferenced Data" and 2 corresponds to "Eliminate Unreferenced Data". +output_subdir = This is used in determining the sub-directory under which intermediate files will be placed. +pdbc = If this boolean template variable is set, the C/C++ Output Files property "Program Database File Name" will be set according to the project target. +pdbl = If this boolean template variable is set, the Linker Debugging property "Generate Program Database File" will be set according to the project target. +platform = Specifies the target platform. +rtti = This corresponds to the C/C++ Language property "Enable Run-Time Type Info". The boolean value specifies the pull-down value in the IDE. +runtime_library = This corresponds to the C/C++ Code Generation property "Runtime Library". If the template variable is set, the numeric value will be used. Otherwise, it will be determined based on the target and debug/optimize configuration. The numeric value specifies the pull-down value in the IDE. +stringpooling = This corresponds to the C/C++ Code Generation property "Enable String Pooling". The boolean value specifies the pull-down value in the IDE. +subsystem = This corresponds to the Linker System property "SubSystem". This variable should not be set directly by the user; instead the project should inherit from 'mfc'. +unicode = If this boolean template variable is set, the UNICODE and _UNICODE macros are added to the C/C++ Preprocessor property "Preprocessor Definitions". +unicode_mfc_entry = This corresponds to the Linker Advanced property "Entry Point". This variable should not be set directly by the user; instead the project should inherit from 'mfc'. +use_mfc = This corresponds to the General property "Use of MFC". This variable should not be set directly by the user; instead the project should inherit from 'mfc'. +UseOfATL = This corresponds to the General property "Use of ATL". +vcprojecttype = Specifies the ProjectType setting within the generated .vcproj file. +vcversion = Specifies the version of the generated .vcproj file. This value is determined by the VC7ProjectCreator or the VC71ProjectCreator. +warning_level = This setting corresponds to the C/C++ General property "Warning Level". Valid values are 0 through 4. +wchar_t = This corresponds to the C/C++ Language property "Treat wchar_t as Built-in Type". The boolean value specifies the pull-down value in the IDE. +xml_version = Specifies the XML version for the generated .vcproj file. |