diff options
Diffstat (limited to 'ACE/MPC/history/ChangeLog-3_1')
| -rw-r--r-- | ACE/MPC/history/ChangeLog-3_1 | 2088 |
1 files changed, 2088 insertions, 0 deletions
diff --git a/ACE/MPC/history/ChangeLog-3_1 b/ACE/MPC/history/ChangeLog-3_1 new file mode 100644 index 00000000000..0997fcd8974 --- /dev/null +++ b/ACE/MPC/history/ChangeLog-3_1 @@ -0,0 +1,2088 @@ +Tue Dec 21 06:27:20 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/ProjectCreator.pm: + + Reverted my change to add more resource file extensions. It would + take template changes to the gnuace, make and nmake project types + to do it right and I don't have the time at this point. + +Mon Dec 20 13:49:42 2004 Chad Elliott <elliott_c@ociweb.com> + + * config/mfc.mpb: + + Fixed the AFX macro. It was _AFX_DLL and should have been + _AFXDLL. + + * modules/ProjectCreator.pm: + + Added more resource file extensions. + +Mon Dec 13 10:27:04 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/ProjectCreator.pm: + + Added a warning when an mpc file is processed, but no output + project file will be created. If it is an implicit project, the + message is only informational. + + * templates/automake.mpd: + + Made the -stamp file go to the output directory of the generated + files. Also rearranged the libs, lit_libs and pure_libs to be + consistent with other project types. + + * templates/make.mpd: + * templates/makedll.mpt: + + Modifications to add a 'targetoutdir' template variable which + determines the output location of object files, exes and + libraries. By default, this template variable is not set and does + not affect anything. Also rearranged the libs, lit_libs and + pure_libs to be consistent with other project types. + + * templates/bmake.mpd: + * templates/em3vcp.mpd: + * templates/nmake.mpd: + * templates/sle.mpd: + * templates/va4icc.mpd: + * templates/vc6dsp.mpd: + * templates/vc7.mpd: + + Rearranged the libs, lit_libs and pure_libs to be consistent with + other project types. The order in which they are added to the + project is now libs, lit_libs and then pure_libs. + +Mon Dec 6 09:39:01 2004 Chad Elliott <elliott_c@ociweb.com> + + * config/bison.mpb: + * config/flex.mpb: + * config/lex.mpb: + * config/yacc.mpb: + + Added more possible output extensions. + + * README: + * modules/ProjectCreator.pm: + + Added the ability to get the output file by specific type without + an extension. See the README for more detail. + + * modules/WorkspaceCreator.pm: + + Fixed a bug where exclude blocks always excluded the listing even + if project types were listed and did not match the current project + type. As a result, the exclude block works just as any other + scope if the project type does not match the excluded project + types. + +Wed Dec 1 19:28:19 2004 Marek Brudka <mbrudka@aster.pl> + + * USAGE (Module): + * modules/WorkspaceCreator.pm (Module): + * modules/ProjectCreator.pm (Module): + * modules/Options.pm (Module): + * modules/FeatureParser.pm (Module): + * modules/Driver.pm (Module): + * modules/Creator.pm (Module): + + Added command line option '-features'. Thanks for Kacper Reutt for + the patch. + +Mon Nov 29 11:24:05 2004 Chad Elliott <elliott_c@ociweb.com> + + * templates/automake.mpd: + + Added top, macros and local markers. It already had a bottom + marker. + +Thu Nov 25 06:55:36 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/MakeWorkspaceCreator.pm: + * modules/NMakeWorkspaceCreator.pm: + * modules/WorkspaceCreator.pm: + + Provide target translation to avoid collisions between directory + names and target names. Incidentally Borland Make does not have + this problem, it is able to distinguish between directories and + targets. Thanks to Steve Huston <shuston@riverace.com> for + bringing this to my attention. + + * templates/vc7.mpd: + + Ensure that static libraries and import libraries got to 'libout' + regardless of whether 'dllout' is set or not. Thanks to Marek + Brudka <mbrudka@elka.pw.edu.pl> for reporting this. + +Wed Nov 24 08:17:01 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/ProjectCreator.pm: + + Fixed a bug where the directory portion would not contain a + trailing slash when using gendir. This would cause some + non-existent file to be added automatically. + + * templates/automake.mpd: + * templates/bmake.mpd: + * templates/em3vcp.mpd: + * templates/ghs.mpd: + * templates/make.mpd: + * templates/nmake.mpd: + * templates/vc6dsp.mpd: + * templates/vc7.mpd: + * templates/vc7csharp.mpd: + * templates/vc7vb.mpd: + + When gendir is used, attempt to automatically make the specified + directory. + +Tue Nov 23 07:52:03 2004 Chad Elliott <elliott_c@ociweb.com> + + * config/boost_base.mpb: + * config/boost_date_time.mpb: + * config/boost_filesystem.mpb: + * config/boost_prg_exec_monitor.mpb: + * config/boost_regex.mpb: + * config/boost_signals.mpb: + * config/boost_test_exec_monitor.mpb: + * config/boost_thread.mpb: + * config/boost_unit_test_framework.mpb: + + Added initial support for boost. + + * modules/AutomakeProjectCreator.pm: + * modules/AutomakeWorkspaceCreator.pm: + * modules/WorkspaceHelper.pm: + * templates/automake.mpd: + + Fixed a bug dealing with the output_option of a custom build + definition. Added support for library versioning and adding the + includedir setting. + +Fri Nov 19 07:06:11 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/BMakeProjectCreator.pm: + + Added '.' to the directories for cppdir and rcdir. At least one + directory is always necessary due to the way that the template is + set up. + + * templates/bmake.mpd: + + Reverted Johnny's previous change as the CPPDIR and RESDIR + settings always need to be there since they are used by the + automatic targets in the template (regardless of whether there are + cpp and rc files or not). + + Also, added a dummy all target if there is no exe or lib. + +Fri Nov 19 10:05:12 UTC 2004 Johnny Willemsen <jwillemsen@remedy.nl> + + * templates/bmake.mpd: + Only generate CPPDIR when cppdir is defined, also only generate + RESDIR when rcdir is defined + +Thu Nov 18 11:56:57 2004 Chad Elliott <elliott_c@ociweb.com> + + * README: + + Document the change to 'dependent'. It now represents the command + upon which generated files are dependent. + + * templates/em3vcp.mpd: + * templates/make.mpd: + * templates/vc6dsp.mpd: + * templates/vc7.mpd: + + Changed to use the new form of 'dependent'. + + * templates/makedll.mpt: + + Added initial support for the NCC compiler. + +Fri Nov 12 18:17:20 2004 Steve Huston <shuston@riverace.com> + + * templates/automake.mpd: Added a 'bottom' marker. + +Thu Nov 11 10:17:43 2004 Chad Elliott <elliott_c@ociweb.com> + + * README: + * modules/ProjectCreator.pm: + + Added a new construct (similar to specific) which can only be used + with component lists (Source_Files, Header_Files, etc.). The + construct is called 'conditional' and can be used to conditionally + add or exclude files based on project type. See the README for + more detail. + +Tue Nov 9 12:19:43 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/ProjectCreator.pm: + + Fixed a bug where generated files that are defaulted may become + "invisible" because of automatic grouping of other non-generated + files of the same type (inline, header, etc.). + +Fri Nov 5 13:42:11 2004 Chad Elliott <elliott_c@ociweb.com> + + * templates/bmake.mpd: + + Added a template variable called debug_macros. The contents of + this variable is included into the compile flags for a debug build + only. Also, fixed the realclean target to check for a value in + GENERATED_DIRTY before attempting to delete it. + +Tue Nov 2 09:43:38 2004 Chad Elliott <elliott_c@ociweb.com> + + * USAGE: + + Added a section to document MPC related environment variables. + + * modules/Options.pm: + + If the argument to -include is a relative path, prepend the + current working directory to the path. Also, removed the + deprecated -static_only option. + +Sun Oct 31 15:40:12 UTC 2004 Johnny Willemsen <jwillemsen@remedy.nl> + + * templates/cbx.mpd: + Just exclude the complete Template_Files folder instead of all files + individually + +Fri Oct 29 11:15:12 UTC 2004 Johnny Willemsen <jwillemsen@remedy.nl> + + * templates/cbx.mpd: + Set the page size to 4096 by default in a debug build + +Fri Oct 29 09:17:12 UTC 2004 Johnny Willemsen <jwillemsen@remedy.nl> + + * templates/cbx.mpd: + Exclude template files from build in MinGW and GCC + +Thu Oct 28 06:23:12 UTC 2004 Johnny Willemsen <jwillemsen@remedy.nl> + + * templates/cbx.mpd: + Added needed compiler options and generate the needed include paths + in the bcc32 part, removed generate of $(BCB) includes, these are + not needed. + +Mon Oct 25 12:18:27 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/BMakeWorkspaceCreator.pm: + * modules/NMakeWorkspaceCreator.pm: + + Added the 'generated' target. This target, which exists in the + other make based projects, will generate all generated source + files. + + * templates/automake.mpd: + + Removed unnecessary uses of <%foreach%>. + + * templates/bmake.mpd: + + Corrected the precompiled header support, fixed the pch_postrule + code and added the 'generated' target. + + * templates/ghs.mpd: + + Changed 'cat' and 'mv -f' to be template variables to better + support ghs on Windows. + + * templates/make.mpd: + + Force object files to be built in the same directory as the source + files. This corresponds to the way dependencies are generated by + makedepend and depgen.pl. + + * templates/nmake.mpd: + + Moved many targets and variable assignments outside of the + platform and configurations <%foreach%> sections to avoid + repetition within the generated makefile. + + Also added the 'generated' target. + + * templates/nmakedll.mpt: + + Added a missing slash to the W3 option under the "Static Release" + section. + +Fri Oct 22 08:55:56 2004 Chad Elliott <elliott_c@ociweb.com> + + * README: + * modules/Creator.pm: + * modules/ProjectCreator.pm: + + Added the ability to specify an "else" clause to a "specific" + section. + + * config/openssl.mpb: + * config/qt.mpb: + * config/zlib.mpb: + + Utilize the new "else" clause. + + * config/xerces.mpb: + + Added a base project for xerces. + +Mon Oct 18 18:03:28 2004 Steve Huston <shuston@riverace.com> + + * modules/AutomakeWorkspaceCreator.pm: When collecting the list of + subdirectories, maintain dependency order so a subdirectory + required before the current directory's projects gets built + in the correct order. + +Mon Oct 18 11:42:28 2004 Steve Huston <shuston@riverace.com> + + * config/openssl.mpb: Added automake to the set of targets that + get lit_libs and includes adjusted. + +Mon Oct 18 08:09:59 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/ProjectCreator.pm: + + Changed the defaulting behavior for Template_Files. If a template + file resulted from generation, it used to always be added (like + source files). Now, it will only be added if Template_Files is + not supplied (defaulted). + +Thu Oct 7 16:44:29 2004 Steve Huston <shuston@riverace.com> + + * modules/AutomakeWorkspaceCreator.pm: Changed the library relocator + adjustment so it doesn't add the $top_builddir relativity to + libraries being built in the same directory. This allows the + automake/make dependencies to work correctly and have things + built in the right order. + +Thu Oct 7 13:06:54 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/EM3ProjectCreator.pm: + * modules/NMakeProjectCreator.pm: + * modules/VC6ProjectCreator.pm: + * modules/VC7ProjectCreator.pm: + * modules/WinVersionTranslator.pm: + * templates/em3vcp.mpd: + * templates/nmake.mpd: + * templates/vc6dsp.mpd: + * templates/vc7.mpd: + + Added a windows version translator to deal with versions that + contain letters and multiple decimal points. See the comment in + WinVersionTranslator for more details. + +Thu Oct 7 13:03:28 2004 Steve Huston <shuston@riverace.com> + + * modules/AutomakeWorkspaceCreator.pm: Fixed the library location + adjuster to adjust more than one library on a line. + +Wed Oct 6 11:35:48 2004 Chad Elliott <elliott_c@ociweb.com> + + * clone_build_tree.pl: + + Added a description of what this script does to the usage. + + * modules/GHSProjectCreator.pm: + * modules/GHSWorkspaceCreator.pm: + * templates/ghs.mpd: + * templates/ghscommon.mpt: + * templates/ghsdll.mpt: + * templates/ghsdllexe.mpt: + * templates/ghslib.mpt: + * templates/ghslibexe.mpt: + + Increased the support for Green Hills Builder. It still isn't + complete as I have only tested it for Integrity. I will need to + test it for different platforms such as Solaris and Windows. + + Due to the way that the builder works, the -hierarchy option does + not work and will never work with the ghs project type. + +Tue Oct 5 10:21:20 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/VC71ProjectCreator.pm: + * modules/VC7ProjectCreator.pm: + * modules/VC8ProjectCreator.pm: + * templates/vc7.mpd: + + For vc7 and vc71, set the ForceConformanceInForLoopScope to TRUE. + For vc8, that setting is deprecated so we do not set it at all. + +Tue Oct 5 08:53:10 2004 Chad Elliott <elliott_c@ociweb.com> + + * config/rpc.mpb: + + Modified to use source_pre_extension instead of just + source_outputext. + + * modules/ProjectCreator.pm: + + Fixed a bug where a generated file (on Windows only) would not be + recognized as already added to the list of files. + + * README: + * modules/TemplateParser.pm: + * templates/automake.mpd: + * templates/bmake.mpd: + * templates/em3vcp.mpd: + * templates/make.mpd: + * templates/nmake.mpd: + * templates/vc6dsp.mpd: + * templates/vc7.mpd: + * templates/vc7csharp.mpd: + * templates/vc7vb.mpd: + + Added the ability to add to 'postcommand' within the scope of a + custom section (such as IDL_Files, RPC_Files, etc.) In the + process of doing this, I fixed a couple of bugs in + TemplateParser.pm: + + 1) If flag_overrides was used in an <%if()%> and the closing + parenthesis were left off, it would not be recognized as an + error but wouldn't give the expected output. + 2) If pseudo variables were used in a scoped add to commandflags, + they wouldn't get converted. + 3) If a line contained only a tab and then a <%...%> variable, a + new line wouldn't be added to the end. + +Thu Sep 30 11:19:57 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/Driver.pm: + + Use the diagnostic() method instead of print so that when the + MPC_SILENT environment variable is set, the messages do not get + printed. + + * modules/Version.pm: + + Do not print a warning if we are unable to find the beta version, + just set the beta version to ??. + + * modules/BMakeWorkspaceCreator.pm: + * modules/NMakeWorkspaceCreator.pm: + * modules/WorkspaceCreator.pm: + + Warn users when options that are used are unnecessary or have no + effect. + +Thu Sep 30 01:26:41 2004 Ossama Othman <ossama@dre.vanderbilt.edu> + + * modules/AutomakeWorkspaceCreator.pm: + + Updated list of files to be cleaned in generated clean-local + target to match current list used by the MPC generated + GNUmakefiles. + + * templates/automake.mpd: + + Removed line continuation generation code. A line continuation + character was not generated after processing the "libs" list + despite the fact that "pure_libs" or "lit_libs" may be defined + as well. This fix causes all libraries to be listed on one line + rather than be split up across multiple lines. + +Wed Sep 29 06:53:40 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/AutomakeWorkspaceCreator.pm: + + Removed a portion of two regular expessions that were causing perl + warnings. Also, switched to use the warning() method instead of + the perl builtin warn function. + +Wed Sep 29 06:40:50 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/WorkspaceCreator.pm: + + Allow callers of the get_modified_workspace_name() method to get a + workspace name that does not have the workspace name attached. + +Tue Sep 28 18:33:22 2004 Steve Huston <shuston@riverace.com> + + * templates/automake.mpd: Removed the dllout/libout path additions from + Mon Sep 27 15:53:18 2004 Steve Huston <shuston@riverace.com>. + Build all libraries into the same relative path in the build tree + as the sources exist in the source tree. This change just inserts + the project's desired library references. The below changes adjust + the references to contain the relative paths in the build tree. + + * modules/ProjectCreator.pm: + * modules/WorkspaceCreator.pm: Changes graciously supplied by Chad + Elliott to add a get_lib_locations() method. It returns a hash + reference where the key is a library name (ACE, TAO, + TAO_PortableServer, etc) and the value will be a relative directory + from where mwc.pl starts. + + * modules/AutomakeWorkspaceCreator.pm: When collecting the projects' + Makefile.<project>.am files together, find all the *_LDADD and + *_LIBADD tokens that look like lib*.la and insert the path + to the library starting with $(top_builddir). This effectively + ignores any dllout/libout directives applied to the libraries + being referenced (for automake targets). Everything builds into + the build tree at the same relative location as its sources in + the source tree. + +Tue Sep 28 09:13:57 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/BMakeWorkspaceCreator.pm: + + Borland Make has a maximum line length of roughly 32767. The + 'all' target could exceed that length given a large amount of + projects within a single workspace. In that case, we have to + create an 'all' target that specifically lists the target commands + and thereby creating a larger workspace makefile, but working + around the Borland Make limitation. + +Mon Sep 27 19:32:42 2004 J.T. Conklin <jtc@acorntoolworks.com> + + * templates/automake.mpd: + + Removed code that added -I${top_srcdir} and -I${top_builddir} + to CPPFLAGS. These should be added by project files if they + are needed. + +Mon Sep 27 19:13:31 2004 J.T. Conklin <jtc@acorntoolworks.com> + + * templates/automake.mpd: + + Changed to omit executable/library building rules if exename, + sharedname, or staticname is not defined. This is useful for + projects that only contain scripts, manpages, IDL files, etc. + +Mon Sep 27 19:02:51 2004 J.T. Conklin <jtc@acorntoolworks.com> + + * templates/automake.mpd: + + Define man_MANS or bin_SCRIPTS if man_files or script_files are + set. + +Mon Sep 27 15:53:18 2004 Steve Huston <shuston@riverace.com> + + * modules/TemplateParser.pm (handle_normalize): Add / $ ( ) to the + characters translated to _ to properly handle full-path names that + may include variables. + + * templates/automake.mpd: Use the dllout/libout settings for placing + libraries. The linker input use of lib names always assumes + libout/lib - this may be too limiting, but not sure how to handle + it otherwise. + +Mon Sep 27 11:56:20 2004 Chad Elliott <elliott_c@ociweb.com> + + * README: + + Document the addition of the <%input_ext%> and <%output_ext%> + pseudo variables that are available to postcommand. + + * config/bison.mpb: + + Added .yy as a possible input extension. + + * config/flex.mpb: + * config/lex.mpb: + + Added .ll as a possible input extension. + + * config/global.features: + + By default disable the zzip feature. + + * config/yacc.mpb: + + Added a yacc base project. Previously it was not possible to + support yacc, but with the postcommand it is now possible. + + * config/zzip.mpb: + + Added a macro (USE_ZZIP) that will be added only if the zzip + feature is enabled. + + * modules/ProjectCreator.pm: + + Multiple bug fixes: + + 1) Support #if 0 and c style comments when looking for an entry + point to determine if the project is an exe or not. + 2) When creating generated file names, we need to remove escape + sequences on the pre_extension and pre_filename portion. + 3) When removing custom input file extensions, we need to loop + through all of the possible extensions to ensure that we get + the right one. + 4) When adding generated files, we need to take into account the + possibility of a pre_filename. + 5) When adding default generated files, we need to look at all of + the valid components (except header and inline) to ensure that + everything that a command generates gets added. + +Wed Sep 22 16:27:39 2004 Steve Huston <shuston@riverace.com> + + * modules/AutomakeWorkspaceCreator.pm: When combining the project + Makefile.<project>.am files, detect usage of automake conditionals + bracketing automake targets and emit blank assignments for those + (i.e. bin_PROGRAMS, lib_LTLIBRARIES, etc.) to have things work + correctly regardless of the condition test at build time. + +Mon Sep 20 11:15:13 2004 Chad Elliott <elliott_c@ociweb.com> + + * README: + + Added documentation about excluding directories and mpc files + within workspaces. + + * templates/nmake.mpd: + + Added support to the template for generation of nmakefiles that + contain both Win32 and Win64 targets. Previously, only one or the + other could be generated. + +Thu Sep 16 09:32:09 2004 Chad Elliott <elliott_c@ociweb.com> + + * README: + * modules/ProjectCreator.pm: + + If an asterisk is used in the exename, sharedname or staticname + setting, then it (the asterisk) will be replaced with the project + name. Thanks to Martin Corino <mcorino@remedy.nl> for suggesting + this. + +Thu Sep 16 07:45:11 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/BMakeWorkspaceCreator.pm: + * modules/MakeWorkspaceCreator.pm: + * modules/NMakeWorkspaceCreator.pm: + + Added a CUSTOM_TARGETS macro that will allow users to access + custom targets that can be generated with the use of the + 'verbatim' clause in mpc files. + + * templates/nmake.mpd: + + Added markers to allow for the use of 'verbatim' with nmake. + +Wed Sep 15 11:32:57 2004 Chad Elliott <elliott_c@ociweb.com> + + * templates/bmake.mpd: + * templates/nmake.mpd: + + Modified these templates to work correctly if no exe name, shared + or static name is specified by the mpc file. + +Mon Sep 13 12:52:22 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/ProjectCreator.pm: + + Fixed a bug where if a custom file is in a directory other than + '.' and the 'gendir' setting is used to specify that the generated + output will be in a particular directory, it would be ignored when + determining if generated files were listed. + + * modules/Creator.pm: + * modules/WorkspaceCreator.pm: + + When converting slashes to back slashes (on Windows), only convert + values when the parameter name does not contain 'flags'. Some + custom build executables on Windows require the use of / as + command switches. + +Tue Sep 7 07:08:26 2004 Chad Elliott <elliott_c@ociweb.com> + + * USAGE: + * modules/Creator.pm: + * modules/Driver.pm: + * modules/Options.pm: + * modules/ProjectCreator.pm: + * modules/TemplateParser.pm: + * modules/WorkspaceCreator.pm: + + Added an option, -expand_env, to replace all $() variables + referenced in MPC with the environment variable equivalent. + + * templates/vc7.mpd: + + Converted all slashes to back-slashes to more closely match the + Windows style. + +Fri Sep 3 09:14:21 2004 Chad Elliott <elliott_c@ociweb.com> + + * templates/em3vcp.mpd: + * templates/vc6dsp.mpd: + * templates/vc7.mpd: + + Only set up custom groups (in the IDE view) if there are input + files that correspond to the custom type. + +Thu Sep 2 09:11:44 2004 Chad Elliott <elliott_c@ociweb.com> + + * templates/bmake.mpd: + * templates/bmakedll.mpt: + * templates/bmakedllexe.mpt: + * templates/bmakelibexe.mpt: + + Modified the template and template input files to correctly build + libraries and applications. Also, added more support for Unicode + builds. + +Wed Sep 1 12:54:06 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/WorkspaceCreator.pm: + + Fixed a bug where the toplevel workspace would be created twice in + the event that the -hierarchy option was used or the subclassed + workspace creator defined the workspace_per_project method to + return 1. + + * modules/WorkspaceHelper.pm: + + Added the base class and factory for all WorkspaceHelpers. It + will dynamically locate, load and allocate the helper based on the + workspace creator type. + + * modules/AutomakeWorkspaceCreator.pm: + + Uncommented the unlink() and split the ACE specific portion into a + helper under ACE_wrappers/bin/MakeProjectCreator/modules. + +Tue Aug 31 08:00:20 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/TemplateParser.pm: + + Fixed a bug where setting a scoped assignment would not apply to a + directory specified within that scope. For example: + + project { + Source_Files { + some_feature = value + src + } + } + + The some_feature setting would not get applied to the files found + in the src directory. + + * USAGE: + * modules/Creator.pm: + * modules/Driver.pm: + * modules/Options.pm: + * modules/ProjectCreator.pm: + * modules/VC6ProjectCreator.pm: + * modules/VC7ProjectCreator.pm: + * modules/VC7WorkspaceCreator.pm: + * modules/WorkspaceCreator.pm: + * templates/make.mpd: + * templates/makedll.mpt: + * templates/vc7csharp.mpd: + * templates/vc7csharp.mpt: + * templates/vc7vb.mpd: + * templates/vc7vb.mpt: + + Added multi-language support to MPC. The default language is C++, + but it now supports C#, Java and Visual Basic. + + An additional bug was fixed in ProjectCreator.pm. If, in a + Define_Custom, the automatic keyword was not set or set to zero + MPC would still automatically add custom files to the project. + +Mon Aug 30 08:07:51 2004 Chad Elliott <elliott_c@ociweb.com> + + * README: + * modules/ProjectCreator.pm: + + Added the ability to get the input and output file names without + an extension. + + * config/qt_uic.mpb: + + Added support for generating uic interface declarations and + implementations. + +Mon Aug 30 06:45:25 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/ProjectCreator.pm: + + Fixed another problem with the -apply_project option. When + determining the library name, it is possible to use the project + name. In that case, we need to keep a copy of the non-modified + project name so we can determine the correct library name. + +Fri Aug 27 09:03:12 2004 Chad Elliott <elliott_c@ociweb.com> + + * templates/vc7.mpd: + + Changed the wchar_t setting to FALSE which is the default for new + projects created in Visual C++ 7. It can be changed to TRUE by + passing "-value_template wchar_t=TRUE" to MPC. + +Fri Aug 27 08:35:39 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/WorkspaceCreator.pm: + + Fixed a problem with the circular project dependency detection + algorithm. Previously, it could take days to detect a circular + dependency if there were a large number of projects. + +Thu Aug 26 17:38:41 2004 J.T. Conklin <jtc@acorntoolworks.com> + + * modules/AutomakeWorkspaceCreator.pm: + + Fix typos, forgot a leading $. + +Thu Aug 26 09:14:57 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/AutomakeProjectCreator.pm: + * modules/AutomakeWorkspaceCreator.pm: + + Give proper credit to the authors of these files. + + * modules/ProjectCreator.pm: + * modules/VC6ProjectCreator.pm: + * modules/VC7ProjectCreator.pm: + + Corrected a bug where dependencies would not be placed in the + workspace when the -apply_project option was used (in conjunction + with -name_modifier). + + * modules/WorkspaceCreator.pm: + + Fixed a problem with the group circular dependency detection + algorithm. Previously, it could take days to detect a circular + dependency if there were a large number of directories. + +Wed Aug 18 23:08:35 2004 J.T. Conklin <jtc@acorntoolworks.com> + + * modules/AutomakeWorkspaceCreator.pm: + + Changed to scan the generated project files for the use of + $(ACE_ROOT), $(TAO_ROOT), etc. and provide the appropriate + definition if they are found. While this behavior is ACE/TAO + specific, there isn't much that can be done without something + like a workspace template. + +Wed Aug 18 08:56:01 2004 J.T. Conklin <jtc@acorntoolworks.com> + + * templates/automake.mpd: + + Changed to use am_includes, rev_avoids, and rev_requires. + + * modules/AutomakeProjectCreator.pm: + + Changed fill_value to understand am_includes, rev_avoids, and + rev_requires. am_includes prepends $(srcdir) to any relative + include paths; rev_avoids and and rev_requires reverses the + order of the avoids and requires lists. This is useful for + the trailing comments after the "endif" in conditionals. + +Fri Aug 13 18:31:01 2004 J.T. Conklin <jtc@acorntoolworks.com> + + * templates/automake.mpd: + Use INSTALL_THIS_TARGET to determine whether to use the + noinst_ prefix. + + * template/automakedll.mpt: + Define INSTALL_THIS_TARGET for use by automake.mpd. + +Fri Aug 13 10:53:57 2004 J.T. Conklin <jtc@acorntoolworks.com> + + * templates/automake.mpd: + Tweak conditionals so that generated files don't have spurious + blank lines. + +Fri Aug 13 10:25:31 2004 J.T. Conklin <jtc@acorntoolworks.com> + + * modules/AutomakeProjectCreator.pm: + Changed sort_files to return 1. While this is not required by + automake, it makes the resulting Makefile.am's easier to read. + This is important now that we're still hand-editing the MPC + generated files. + + * templates/automake.mpd: + Add pidl_files to headers so they'll be installed. + +Thu Aug 12 09:42:55 2004 Chad Elliott <elliott_c@ociweb.com> + + * clone_build_tree.pl: + + Modified the usage. + + * modules/NMakeProjectCreator.pm: + * modules/ProjectCreator.pm: + * modules/VC6ProjectCreator.pm: + * modules/VC7ProjectCreator.pm: + + Removed code that converted $(...) to %...%. During testing, it + didn't seem necessary and was broken in some instances. I don't + even remember why it was added in the first place. + +Thu Aug 12 03:33:45 UTC 2004 Don Hinton <don.hinton@vanderbilt.edu> + + * templates/vc6dsp.mpd: + * templates/vc6dspdll.mpt: + * templates/vc6dspdllexe.mpt: + * templates/vc6dsplib.mpt: + * templates/vc6dsplibexe.mpt: + * templates/vccommon.mpt: New file. + Added support for midl. It uses midl_includes, midl_defines, + and midl_flags. To use, just add an idl file to your source + files section and define the midl_* variables in the vc6/7 + section. Thanks to Chad Elliott <elliott_c@ociweb.com> and + Krishnakumar B <kitty@dre.vanderbilt.edu> for help with this. + +Wed Aug 11 19:15:10 2004 J.T. Conklin <jtc@acorntoolworks.com> + + * modules/AutomakeWorkspaceCreator.pm: + * templates/automake.mpd: + Changed header macro from nobase_pkginclude_HEADERS to + nobase_include_HEADERS. + Changed installed library headers to include idl_files. + Added support for EXTRA_DIST with list of resource_files. + +Wed Aug 11 07:45:11 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/AutomakeProjectCreator.pm: + * modules/AutomakeWorkspaceCreator.pm: + * modules/BMakeProjectCreator.pm: + * modules/BMakeWorkspaceCreator.pm: + * modules/CBXProjectCreator.pm: + * modules/Creator.pm: + * modules/DirectoryManager.pm: + * modules/Driver.pm: + * modules/GHSWorkspaceCreator.pm: + * modules/HTMLProjectCreator.pm: + * modules/MakeWorkspaceCreator.pm: + * modules/NMakeWorkspaceCreator.pm: + * modules/ProjectCreator.pm: + * modules/SLEProjectCreator.pm: + * modules/TemplateParser.pm: + * modules/WorkspaceCreator.pm: + + Encapsulated the VMS changes related to dirname into a single + method (mpc_dirname) that gets called instead dirname. Thanks to + Martin Corino <mcorino@remedy.nl> for verifying my changes. + +Wed Aug 11 10:08:12 UTC 2004 Johnny Willemsen <jwillemsen@remedy.nl> + + * templates/bmake.mpd: + Corrected handling of resource files so that we can handle the + resource files in the TAO libraries + +Tue Aug 10 17:10:38 2004 J.T. Conklin <jtc@acorntoolworks.com> + + * templates/automake.mpd: + Add initial support for automake conditionals with <%requires%> + and <%avoids%>. + Remove extra spaces before backslashes in _CPPFLAGS. + +Tue Aug 10 09:10:36 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/MakeWorkspaceCreator.pm: + * templates/make.mpd: + + Modifications to ensure that generated files get built before + anything else. + +Mon Aug 9 07:50:47 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/ProjectCreator.pm: + + Fixed a bug in the code that determines which generated files get + added automatically. The array that can exist in the components + list could be undefined and in that case nothing got added + automatically. + + * templates/automakedll.mpt: + + Added a missing conditional include of the common mpt file. + +Mon Aug 9 07:04:12 UTC 2004 Johnny Willemsen <jwillemsen@remedy.nl> + + * templates/bmakecommon.mpt: + Use cw32mti.lib instead of cw32mt.lib + +Sat Aug 7 23:19:33 2004 J.T. Conklin <jtc@acorntoolworks.com> + + * templates/automake.mpd: + Introduce an intermediate dependency between custom input + and output files so that only one instance of the command + is spawned per input file with parallel make. + +Thu Aug 5 14:57:19 2004 J.T. Conklin <jtc@acorntoolworks.com> + + * templates/automake.mpd: + Use $(srcdir)/<%custom_type->input_file%> instead of $< so + resulting makefile will work on systems where make doesn't + support VPATH. + +Thu Aug 5 11:14:12 2004 J.T. Conklin <jtc@acorntoolworks.com> + + * templates/automake.mpd: + Check "libout", not "install" to determine whether a library + is to be installed. + +Thu Aug 5 09:14:12 UTC 2004 Johnny Willemsen <jwillemsen@remedy.nl> + + The following changes are from Martin Corino <mcorino@remedy.nl> + + * modules/Creator.pm: + * modules/Driver.pm: + * modules/ProjectCreator.pm: + * modules/WorkspaceCreator.pm: + Added various changes to support autobuild MPC generation on + OpenVMS. + +Wed Aug 4 11:47:06 2004 J.T. Conklin <jtc@acorntoolworks.com> + + * templates/automake.mpd: + Use technique pioneered in the last checkin to remove the + $(DUMMY_VALUE...) hack from _CPPFLAGS definitions. + +Wed Aug 4 11:23:04 2004 J.T. Conklin <jtc@acorntoolworks.com> + + * templates/automake.mpd: + The automake documentation recommends that header files for + programs and convienence libraries be listed in _SOURCES and not + _HEADERS. This has been done for programs (as we don't yet have + a way to reliably distinguish between convienence libraries from + installed libraries). I've done this with rather ugly template + macros to avoid having to do the $(DUMMY_VALUE...) hack. This + results in more readable Makefile.am's. + +Wed Aug 4 09:23:03 2004 J.T. Conklin <jtc@acorntoolworks.com> + + * modules/AutomakeWorkspaceCreator: + * templates/automake.mpd: + Changed to set nobase_pkginstall_HEADERS instead of HEADER_FILES, + INLINE_FILES, and TEMPLATE_FILES in Makefile.<project>.am files. + Extending this will enable us to control installing headers on a + per library basis (all we need is some way to control the prefix + used for _HEADERS). + +Mon Aug 2 09:29:31 2004 Steve Huston <shuston@riverace.com> + + * templates/automake.mpd: For non-installed libraries, generate + noinst_LTLIBRARIES instead of lib_LTLIBRARIES. + For libraries, assume that "libs" are libtool-created libraries + and "lit_libs" are not. + +Mon Aug 2 08:04:27 2004 Chad Elliott <elliott_c@ociweb.com> + + * templates/bmake.mpd: + * templates/bmakecommon.mpt: + + Removed ACE specific portions of the bmake template. They will + need to be supplied on the command line using the -value_template + and -value_project options. + +Sun Aug 1 08:31:49 2004 J.T. Conklin <jtc@acorntoolworks.com> + + * templates/automake.mpd: + Fix typo, use <%dynamicflag%> instead of <%dynamicflags%> within + foreach loop. + +Sun Aug 1 15:13:12 UTC 2004 Johnny Willemsen <jwillemsen@remedy.nl> + + * templates/bmake.mpd: + Use the new ccflags, common_flags and warnflags. Tried to add + some support for unicode builds, this is not complete yet, added + "" around the objfiles, to handle ++ in directory/file names. Added + setting of define ACE_LD_DECORATOR_STR, which is used in ACE to + determine the filename extension of DLL's. Removed the removal + of files with postlinkrmext extenion (is .tds) files after the + link, instead do this with realclean. + + * templates/bmakecommon.mpt: + Updated dllflags, common_defines, added ccflags, + common_flags, and warnflags which have to be passed + to the compiler + + * templates/bmakedll.mpt: + * templates/bmakedllexe.mpt: + * templates/bmakelibexe.mpt: + Set postlinkrmext to .tds in all these files, we should + rework this a little bit more, tds files are needed for + the debugger and we shouldn't remove them after the link. + + The bmake target is not complete yet, things that have to be + improved are startup objects (gperf just cores now), + unicode support, codeguard support, install target, clean target. + +Wed Jul 28 20:01:36 2004 J.T. Conklin <jtc@acorntoolworks.com> + + * templates/automake.mpd: Emit a _LDFLAGS definition if linkflags + is defined. + +Wed Jul 28 09:15:02 2004 Chad Elliott <elliott_c@ociweb.com> + + * clone_build_tree.pl: + + Remove backup files before trying to create them and added + information to some error messages. + + * modules/AutomakeWorkspaceCreator.pm: + + Cleaned up the code a bit. + + * templates/automakedll.mpt: + * templates/automakeexe.mpt: + + The automakedll.mpt defines linkflags for use within + automake.mpd. automakeexe.mpt just includes automakedll.mpt. + +Fri Jul 23 14:32:54 2004 J.T. Conklin <jtc@acorntoolworks.com> + + * modules/AutomakeWorkspaceCreator.pm: + Parse generated Makefile.<project>.am files as their contents + are being inserted into the workspace Makefile.am, converting + the first instance where a macro is appended to (+=) into a + simple assignment (=). This results in a Makefile.am that is + closer to what would be written by hand, and automake will often + generate smaller Makefile.in files since it won't be tricked + into pulling in boilerplate for macros that were defined and not + used. + +Thu Jul 22 17:39:41 2004 Steve Huston <shuston@riverace.com> + + * modules/AutomakeWorkspaceCreator.pm: When writing + configure.ac.Makefiles, insert entries for project-less directories + between project-containing directories. Allows the bootstrap + procedure to find and make the needed Makefiles to traverse the + entire build tree. + + + * templates/automake.mpd: Changed _LIBADD to _LDADD for programs. + +Thu Jul 22 12:52:39 2004 Steve Huston <shuston@riverace.com> + + * modules/AutomakeWorkspaceCreator.pm: If there's no local project + info for the current Makefile.am, don't put the initial bin_PROGRAMS, + lib_LTLIBRARIES, etc. If there are local projects, add "." to the + SUBDIRS. + + * templates/automake.mpd: Add _LIBADD settings to pick up needed + libraries. + +Wed Jul 21 19:34:46 2004 J.T. Conklin <jtc@acorntoolworks.com> + + * modules/AutomakeProjectCreator.pm: + Override expand_variables_from_template_values. + + * modules/AutomakeWorkspaceCreator.pm: Don't emit SUBDIRS + definition if there aren't any subdirectories. + + * templates/automake.mpd: Simplify so that _CPPFLAGS, etc. + settings are not duplicated for programs and libraries, + grouped and non-grouped source files, etc. + +Wed Jul 21 18:02:31 2004 Steve Huston <shuston@riverace.com> + + * templates/automake.mpd: Added the _CPPFLAGS setting to the + non-grouped library section. + +Wed Jul 21 17:04:39 2004 Steve Huston <shuston@riverace.com> + + * modules/AutomakeWorkspaceCreator.pm: In write_comps(), combine all + of the current directory level's Makefile.<project>.am files into + the directory's Makefile.am file and delete the individual files. + Write only the Makefile.am file paths into the configure.ac.Makefiles + list. This is because the previous loop-through-current-Makefile + scheme sent make into an infinite loop, consuming all process + slots very quickly. The generated Makefiles always like to start + again at the top Makefile to check its updatedness, even if + a specific Makefile.<project> file was specified to make. Moved the + general cleanup text from automake.mpd to here. + + * templates/automake.mpd: For non-project-specific info (bin, lib, + etc.) use += rather than = to allow multiple per-project files to + be combined into one file later. Removed the general cleanup + directives and put them in the workspace generator, above. J.T. + Conklin also supplied changes for the following: + + - Append list of custom_type outfiles to BUILT_SOURCES + + - Append list of custom_type outfiles to CLEANFILES + + - Emit explicit rules for building custom type outfiles. Note that + unlike some of the other makefile templates, I've used $< instead + of <%custom_type->input_file%> so that the file will be found via + vpath. + + - Removed global setting of INCLUDES. Include paths are now handled + by per library/program _CPPFLAGS. + +Fri Jul 16 12:24:36 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/WorkspaceCreator.pm: + + Added a method to get the current output file name. + +Thu Jul 15 14:02:04 2004 Chad Elliott <elliott_c@ociweb.com> + + * clone_build_tree.pl: + + Cleaned up the code a bit. + + * modules/AutomakeWorkspaceCreator.pm: + + Used a parameter passed into write_comps to determine if we are + writing the top level workspace. + + * modules/ProjectCreator.pm: + + Ignore project names that are set in a base project. It doesn't + make sense and I can't think of a practical use of this. + + * modules/WorkspaceCreator.pm: + + Fixed a bug where an excluded name could be partially matched and + possibly exclude something that wasn't meant to be. + +Thu Jul 8 14:09:49 2004 Chad Elliott <elliott_c@ociweb.com> + + * README: + * modules/ProjectCreator.pm: + + Added a new wild card syntax ('^') similar to the '!' that works + best for excluding generated files from component lists. See the + README for more details. + +Thu Jul 8 09:16:21 2004 Chad Elliott <elliott_c@ociweb.com> + + * README: + + Added documentation about the wild card support in MPC. + + * modules/ProjectCreator.pm: + + If grouping is used in source files, put automatically added files + in corresponding groups. + + * templates/vc7.mpd: + + Use <%ucw()%> for the custom_type which looks better in the + graphical interface. + +Tue Jul 6 11:29:07 2004 Chad Elliott <elliott_c@ociweb.com> + + * README: + + Added documentation for new pseudo template variables for use + within the command, commandflags, postcommand and output_option + settings. + + * modules/ProjectCreator.pm: + + Fixed a bug where mixing grouped and non-grouped files would cause + the non-grouped files to be ignored. + + Added new pseudo template variables for the null device, >, <, && + and ||. + + * modules/VC7ProjectCreator.pm: + + Override defaults for the >, < and && values to correctly support + these within the XML projects. + + * templates/em3vcp.mpd: + * templates/vc6dsp.mpd: + * templates/vc7.mpd: + + Added support for grouping header, inline, template, resource and + documentation files. + +Fri Jul 2 10:27:03 2004 Chad Elliott <elliott_c@ociweb.com> + + * templates/vc7.mpd: + + Default the machine setting to X86. + +Fri Jul 2 08:17:48 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/Creator.pm: + + Return the same kind of crlf on OS/2 as we do on Windows. Just in + case someone tries to use MPC on OS/2. + + * modules/ProjectCreator.pm: + + When returning the list of grouped source files, convert the + slashes if it is necessary. + + * templates/vc7.mpd: + + The above change allows us to use file grouping for vc7. + Previously, files would have a forward slash in the name (if they + were in sub-directories) which confused vc7 and would cause link + errors. + +Thu Jul 1 09:35:27 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/MakeWorkspaceCreator.pm: + + Added a .PHONY: target for sub targets. This only has an effect + when using GNU make, but does not have an adverse effect when + using other versions of make. + + * README: + * modules/ProjectCreator.pm: + * modules/TemplateParser.pm: + * templates/bmake.mpd: + * templates/em3vcp.mpd: + * templates/make.mpd: + * templates/nmake.mpd: + * templates/vc6dsp.mpd: + * templates/vc7.mpd: + + Added support for a new custom build keyword 'postcommand'. The + postcommand can be used to run arbitrary commands after the main + custom command is run. See the README for more details. + +Thu Jul 1 10:16:38 2004 Steve Huston <shuston@riverace.com> + + * modules/AutomakeWorkspaceCreator.pm (write_comps): Write a + configure.ac.Makefiles entry for the top-level workspace as + well, else there's no starting point in the configured tree. + + * modules/TemplateParser.pm: Added new template <%normalize%> + that takes a exename as a parameter. Converts '-' to '_' to + make the name palatable prepended to a special automake name + such as _SOURCES. + + * templates/automake.mpd: Applied a patch from Chad that makes + grouped sources work better. Also, added <%normalize%> to + exename_SOURCES generation so exe names with '-' in them get + changed to '_' for their SOURCES. This is the same normalization + Automake will do when trying to find the SOURCES for a bin_ target. + Removed the support for being able to select library subsets to + build at configure time. It didn't work right, and the subset + selection capability is not in the MPC-generated GNUmakefiles + either. It can be (re)attempted later if needed, but the longer-term + goal in ACE land seems to be to find other ways to reduce footprint. + Also changed the _PROGRAMS generation to switch between bin_ and + noinst_ depending on presence of an 'install' directive. + +Tue Jun 22 20:53:12 2004 Ossama Othman <ossama@dre.vanderbilt.edu> + + * modules/AutomakeWorkspaceCreator.pm (AUTOMAKE_OPTIONS): + + Removed generation of this make variable. All Automake options + should generally be set via the AM_INIT_AUTOMAKE autoconf macro + in the application's `configure.ac' file. + +Tue Jun 22 20:35:36 2004 Ossama Othman <ossama@dre.vanderbilt.edu> + + * templates/automake.mpd (AUTOMAKE_OPTIONS): + + Removed this make variable. All Automake options should + generally be set via the AM_INIT_AUTOMAKE autoconf macro in the + application's `configure.ac' file. + + (pkginclude_HEADERS): + + Corrected make variable for template files. + "$(INLINE_FILES)" -> "$(TEMPLATE_FILES)". + +Tue Jun 15 07:02:12 2004 Chad Elliott <elliott_c@ociweb.com> + + * USAGE: + * modules/Options.pm: + + Updated the usage information to provide more details on using the + -base option. + + * modules/ProjectCreator.pm: + + We need to ensure that macros only get expanded to environment + variables when converting source file, header file, etc. related + macros. Thanks to Phil Mesnier <mesnier_p@ociweb.com> for + reporting this. + +Thu Jun 10 08:33:08 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/Driver.pm: + * modules/Options.pm: + + Moved the usage out of the Driver and into the Options module. + + * modules/ProjectCreator.pm: + * modules/VC6ProjectCreator.pm: + + Added support for replacing $(...) with an environment variable. + This is not necessary for 'make' based project types and is not + supported by Visual C++ 7 or higher. So, it is used by the em3 + and vc6 types. + +Tue Jun 8 17:14:29 2004 Steve Huston <shuston@riverace.com> + + * modules/AutomakeWorkspaceCreator.pm: Fixed string writing to write + a tab to the generated file where desired, not a '\t'. + +Tue Jun 8 12:29:19 2004 Steve Huston <shuston@riverace.com> + + * modules/AutomakeWorkspaceCreator.pm (write_comps): Get automake + trees to generate. It now relies on this scheme: + * Each project goes in its own Makefile.<project>.am file (this is + not a change from previous versions). + * Each Makefile.am has a list of local project Makefiles added to + it and has all-local, clean-local, and distclean-local targets + added that cycle through all the local projects and do sub-makes. + * At autoconf/automake (bootstrap) time, all of the + Makefile[.<proj>].am files get processed into Makefile[.<proj>].in + files. This list is directed by the configure.ac.Makefiles list + that should be included into configure.ac. + * At configure time, all of the .in files get processed into + Makefiles. All the local targets that MPC put in the Makefile.am + files should go through to the Makefiles at each level, and + direct the build. + + Made these changes: + - Only generate a configure.ac.Makefiles at the starting directory + level; not at each level. When adding entries, don't keep the + ".am" suffix; this was a mistake. + - The configure.ac.Makefile also needs an entry for the Makefile at + each directory level with a project. + - The top-level Makefile.am has the "ACLOCAL = @ACLOCAL@" and + "AC_LOCAL_AMFLAGS = -I m4" lines added to the end to pass the + flags along properly when running autoconf. + +Tue Jun 8 11:30:15 2004 Chad Elliott <elliott_c@ociweb.com> + + * templates/vc7.mpd: + + Added the ability to add additional compiler options through the + use of the compile_flags template value. + +Fri May 28 14:03:13 2004 Chad Elliott <elliott_c@ociweb.com> + + * LICENSE: + + Added a license file with the content from the MPC section of + http://theaceorb.com/product/license.html. + + * config/openssl.mpb: + * templates/automake.mpd: + * templates/bmake.mpd: + * templates/makedll.mpt: + + Removed trailing white space. + +Fri May 28 13:06:01 2004 Chad Elliott <elliott_c@ociweb.com> + + * templates/em3vcplib.mpt: + * templates/em3vcplibexe.mpt: + * templates/vc7lib.mpt: + * templates/vc7libexe.mpt: + + Consistently name static project configurations across all Windows + based project types (excluding NMake since it has both dynamic and + static in a single makefile). + +Wed May 26 17:17:29 2004 Steve Huston <shuston@riverace.com> + + * modules/AutomakeWorkspaceCreator.pm: In write_comps(), when writing + the SUBDIRS list, only list next-level directories - SUBDIRS is + only allowed to list them, and not anything below. + +Mon May 24 13:44:13 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/WorkspaceCreator.pm: + + Print out the projects involved when warning about circular + dependencies. + +Mon May 24 07:35:39 2004 Chad Elliott <elliott_c@ociweb.com> + + * config/zzip.mpb: + + Added a base project to support the zzip library. + + * modules/BMakeWorkspaceCreator.pm: + * modules/NMakeWorkspaceCreator.pm: + + Removed unused variables. + + * modules/AutomakeWorkspaceCreator.pm: + * modules/CBXWorkspaceCreator.pm: + * modules/GHSWorkspaceCreator.pm: + * modules/SLEWorkspaceCreator.pm: + * modules/VA4WorkspaceCreator.pm: + + Removed an extra unused parameter to the sort_dependencies method. + + * modules/Version.pm: + + Modified the code to only read the ChangeLog if we are going to + display the version number. + + * USAGE: + * modules/Creator.pm: + * modules/DirectoryManager.pm: + * modules/Driver.pm: + * modules/Options.pm: + * modules/Parser.pm: + * modules/ProjectCreator.pm: + * modules/WorkspaceCreator.pm: + + Added support for generating the workspace and project files + into an alternate directory tree. This can not be used to build + code outside of the source tree, only to generate the workspace + and project files to make it easier to package up these files for + distribution. + +Sat May 22 17:28:31 2004 Steve Huston <shuston@riverace.com> + + * modules/AutomakeWorkspaceCreator.pm: Changed AUTOMAKE_OPTIONS to + "1.7 foreign" to match what's used at the project level. + +Tue May 18 19:48:33 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/ProjectCreator.pm: + + Remove escape sequences from extensions while generating the list + of possible file names from custom inputs instead of doing it after + the fact and possibly removing back slashes from parts of the + generated file path. + +Tue May 18 09:37:29 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/Version.pm: + + Added code to automatically determine the beta version number at + run-time. This number is determined by the manipulating the total + number of ChangeLog entries. + + * mpc.pl: + * mwc.pl: + + Provide a getBasePath() function to allow MPC to determine the + location of the ChangeLog. + +Tue May 18 07:22:53 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/ProjectCreator.pm: + + When parsing the component list, convert any $(...) to relative + paths if possible. + +Fri May 14 06:45:14 2004 Chad Elliott <elliott_c@ociweb.com> + + * MPC version 3.1 released. + +Wed May 12 08:14:00 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/BMakeProjectCreator.pm: + + Sort the directories when forming the cppdir value. We need to + ensure that '.' comes first. Borland make attempts to generate + source files in each CPPDIR directory until it is successful + which explains multiple invocations of custom build tools. + +Tue May 11 11:36:00 2004 Chad Elliott <elliott_c@ociweb.com> + + * templates/em3vcp.mpd: + * templates/em3vcpdll.mpt: + * templates/em3vcpdllexe.mpt: + * templates/em3vcplib.mpt: + * templates/em3vcplibexe.mpt: + + Added support for ARM v4. Thanks to Jonathan Pollack + <pollack_j@ociweb.com> for providing the patches. Also, I fixed a + bug where the precompiled header output was going to the wrong + directory. + +Tue May 11 10:53:11 2004 Chad Elliott <elliott_c@ociweb.com> + + * USAGE: + * modules/Driver.pm: + * modules/Options.pm: + + Added a -version option to print the MPC version and exit. + + * modules/ProjectCreator.pm: + + Added libraries and executables to the install script generation. + + * prj_install.pl: + + Added support for installation of libraries and executables. + +Fri May 7 07:41:55 2004 Chad Elliott <elliott_c@ociweb.com> + + * templates/bmakelib.mpt: + * templates/bmakelibexe.mpt: + * templates/em3vcplib.mpt: + * templates/em3vcplibexe.mpt: + * templates/vc6dsplib.mpt: + * templates/vc6dsplibexe.mpt: + + Consistently name the intermediate and output directories across + all Windows based templates. + +Thu May 6 10:50:53 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/ProjectCreator.pm: + + Fixed a bug dealing with generated files that used the 'gendir' + setting. If the generated files were listed, but did not match up + exactly with what was expected, they would be listed twice in the + generated project. + +Thu May 6 09:21:59 2004 Chad Elliott <elliott_c@ociweb.com> + + * templates/em3vcp.mpd: + * templates/nmake.mpd: + * templates/vc6dsp.mpd: + * templates/vc7.mpd: + + Added a template name, link_options, to allow users to inject MS + linker options into the generated projects. + +Wed May 5 12:34:51 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/Creator.pm: + * modules/ProjectCreator.pm: + + Changed the way that duplication additions for libpaths, includes + and libs are handled. We now silently ignore duplicate additions + and maintain original assignment order. This fixes problems with + static linking on UNIX. + +Tue May 4 07:40:02 2004 Chad Elliott <elliott_c@ociweb.com> + + * README: + + Updated information about the use of 'gendir' without + 'output_option' set in a custom file definition. + +Mon May 3 23:12:37 2004 Ossama Othman <ossama@dre.vanderbilt.edu> + + * config/openssl.mpb: + + Some Linux OpenSSL installations compile in Kerberos support. + Add the Kerberos include path to preprocessor include path. + +Mon May 3 12:17:10 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/ProjectCreator.pm: + + By default, refer to the dll based template input files for static + template input. If the template supports generating static + projects, then the project creator module will have overridden + the methods to return the correct template input files. + + * templates/bmake.mpd: + * templates/em3vcp.mpd: + * templates/nmake.mpd: + * templates/vc6dsp.mpd: + * templates/vc7.mpd: + + These template files have been changed in a similar fashion to + Justin Michel's changes from Sat May 1 15:20:00 2004. + +Mon May 3 10:49:28 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/ProjectCreator.pm: + + Fixed yet another bug in the relative replacement code section. + If a portion of the current path was found in the replacement + value, it would assume that the whole thing was to be replaced. + This is obviously wrong and has been corrected. + +Sat May 1 15:20:00 2004 Justin Michel <michel_j@ociweb.com> + + * templates/vc7.mpd: + * templates/vc7dll.mpt: + * templates/vc7lib.mpt: + + Resource Files are only for exe or dll binaries, not for static + libs. Added a check for type_is_static, so that the resource files + section is not created. type_is_* should be defined outside of the + individual configurations. This change allows checking + type_is_static from outside of a particular configuration. + +Thu Apr 30 14:50:00 2004 Justin Michel <michel_j@ociweb.com> + + * templates/nmake.mpd: + + Added a new DEPENDCHECK target that either prints the "Using x.dep" + or "Warning : cannot find x.dep". This way, the warning is not + displayed when generating dependencies. + +Fri Apr 30 11:47:48 2004 Chad Elliott <elliott_c@ociweb.com> + + * README: + + Fixed spelling errors. + + * config/mfc.mpb: + + Added a non-ACE specific version of the mfc base project. + + * modules/Creator.pm: + * modules/Driver.pm: + * modules/Options.pm: + * modules/ProjectCreator.pm: + + Made modifications to avoid Perl warnings when working with + version 5.005 or earlier. + + * prj_install.pl: + + Added additional information to the usage that describes the + default set of install tags. + + * templates/cbx.mpd: + + Removed ACE specific lines. + +Thu Apr 29 14:50:00 2004 Justin Michel <michel_j@ociweb.com> + + * templates/nmake.mpd: + + The custom build output should be the first thing listed for + the ALL target, to ensure that any generated files are available + for the rest of the commands. + +Mon Apr 26 09:55:25 2004 Chad Elliott <elliott_c@ociweb.com> + + * templates/em3vcplibexe.mpt: + * templates/vc6dsplib.mpt: + * templates/vc6dsplibexe.mpt: + + Switched to using MFC as a shared dll even in static libraries and + executables. There is no need to statically link in the MFC + libraries. + +Fri Apr 23 11:06:10 2004 Chad Elliott <elliott_c@ociweb.com> + + * README: + * modules/ProjectCreator.pm: + + Added additional functionality to fix RT #3816 and RT #3847. Both + issues dealt with custom generated files not being cleaned up + properly. The real issue was that there was no way to represent, + in MPC, what was being generated by the custom command. + Additional custom definition keywords have been added that allow + users to represent what the custom command actually generates. + + * modules/Version.pm: + + Increment the minor version number. + + * templates/vc7.mpd: + + This change fixes RT #3856. The vc7 template (which is being used + by the vc8 project type) did not work quite correctly in Visual + C++ 8. Multi-lined custom commands were changed to be compatible + with vc7, vc71 and vc8. + +Thu Apr 22 08:32:20 2004 Chad Elliott <elliott_c@ociweb.com> + + * config/openssl.mpb: + * config/qt.mpb: + * config/zlib.mpb: + + Added the vc8 type to the 'specific' sections that have vc71 in + them. + +Wed Apr 21 08:50:01 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/VC8ProjectCreator.pm: + + Corrected some bugs in this module. + + * modules/VC8WorkspaceCreator.pm: + + Removed some redundant methods that are inherited from the + VC71WorkspaceCreator. + +Wed Apr 21 13:27:43 UTC 2004 Johnny Willemsen <jwillemsen@remedy.nl> + + * USAGE: + Added vc8. + +Wed Apr 21 13:06:44 UTC 2004 Johnny Willemsen <jwillemsen@remedy.nl> + + * modules/VC8ProjectCreator.pm: + * modules/VC8WorkspaceCreator.pm: + * modules/MWC.pm: + * modules/MPC.pm: + Added Visual C++ 8 MPC template. This is for the Microsoft + Visual Studio 8 Whidbey March 2004 Preview. + +Mon Apr 19 13:44:16 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/Creator.pm: + * modules/ProjectCreator.pm: + + When subtracting values from mapped keywords, we must expand + template values in order to ensure that the values that are being + subtracted are actually removed. This has a side effect of + expanding template values during subtraction even if the project + creator type does not normally expand template values. + +Fri Apr 16 08:05:19 2004 Chad Elliott <elliott_c@ociweb.com> + + * prj_install.pl: + + This script reads .ins files generated by MPC and installs + portions of a project into a user specified location. + +Thu Apr 15 13:16:03 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/WorkspaceCreator.pm: + + Fixed a bug where generating the hierarchical workspace would have + the wrong build ordering. It was a subtle bug that had to do with + the way projects were sorted. + +Wed Apr 14 07:41:58 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/ProjectCreator.pm: + + Modified the file exclusion behavior to work correctly with + grouped files within components. + +Tue Apr 13 13:46:14 2004 Chad Elliott <elliott_c@ociweb.com> + + * README: + * USAGE: + + Removed ACE specific references and documentation. + + * modules/ProjectCreator.pm: + + Added wildcard support (*?[]) for component lists and the ability + to exclude files from the component lists by preceding the name + with '!'. + + ex. + project { + Source_Files { + // Get every source file, except foo.cpp + !foo.cpp + } + } + + project { + Source_Files { + // Get every cpp file that starts with RT + RT*.cpp + } + } + + * modules/Parser.pm: + * modules/TemplateParser.pm: + + Added the ability for the TemplateParser to cache the contents of + a template to avoid opening and reading the project template over + and over again. + +Mon Apr 12 11:38:29 2004 Chad Elliott <elliott_c@ociweb.com> + + * clone_build_tree.pl: + + Added more file types to exclude during cloning. + + * modules/Creator.pm: + + We still need to maintain the real set of files added for + generation of the workspace. + + * modules/WorkspaceCreator.pm: + + Added more information to the error message when duplicate + projects are found within a workspace. + +Mon Apr 12 10:00:56 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/Creator.pm: + + Switched the files_written structure to a hash array instead of an + array to make searches within that structure faster. + + * modules/WorkspaceCreator.pm: + + When generating workspaces, only write out the workspace if it is + the main workspace that corresponds to an mwc file or it hasn't + been written out yet. + + * templates/vc7.mpd: + * templates/vc7dll.mpt: + * templates/vc7exe.mpt: + * templates/vc7lib.mpt: + * templates/vc7libexe.mpt: + + Removed the 'debug' template keyword. It was unnecessary and + conflicted with the Debug configuration now that these are + case-insensitive. + +Fri Apr 9 21:19:34 2004 Chad Elliott <elliott_c@ociweb.com> + + * README: + * modules/Creator.pm: + * modules/ProjectCreator.pm: + + Added a new keyword, 'recurse', that causes MPC to recurse into + directories listed under componets such as Source_Files, + Header_Files, etc. + +Fri Apr 9 13:51:47 2004 Chad Elliott <elliott_c@ociweb.com> + + * clone_build_tree.pl: + + Added a script that works similarly to create_ace_build.pl except + that it does not restrict the location of the cloned build tree + and works with any tree structure, not just ACE_wrappers. + +Fri Apr 9 12:38:15 2004 Chad Elliott <elliott_c@ociweb.com> + + * modules/ProjectCreator.pm: + + When replacing $() with template variables, we need to ensure that + if what it is replaced with also contains a $() construct, then + that too will be replaced with relative definitions. + +Thu Apr 8 09:51:28 2004 Chad Elliott <elliott_c@ociweb.com> + + * templates/make.mpd: + + Corrected a problem with the pch_postrule commands. I forgot that + $$ was interpreted by make, so what I really wanted was $$$$ to + get $$ passed out to the shell. + +Thu Apr 8 07:02:25 2004 Chad Elliott <elliott_c@ociweb.com> + + * USAGE: + * modules/Driver.pm: + + Removed the documentation stating that new name value template + pairs could not be added using -value_template. This is no longer + the case. + + * modules/Options.pm: + * modules/ProjectCreator.pm: + * modules/TemplateInputReader.pm: + * modules/TemplateParser.pm: + + Support replacing $() constructs with template values of the same + name. By default all project creators will do this. Overriding + the expand_variables_from_template_values method is the way to + modify this behavior. + +Wed Apr 7 06:49:16 2004 Chad Elliott <elliott_c@ociweb.com> + + * templates/bmake.mpd: + * templates/em3vcp.mpd: + * templates/make.mpd: + * templates/nmake.mpd: + * templates/vc6dsp.mpd: + * templates/vc7.mpd: + + Finished support for the 'pch_postrule' of the Define_Custom which + post edits generated source files and places the #include for the + precompiled header at the top of the file. + +Mon Apr 5 10:43:03 2004 Chad Elliott <elliott_c@ociweb.com> + + * README: + * USAGE: + * mpc.pl: + * mwc.pl: + * config/bison.mpb: + * config/default.rel: + * config/flex.mpb: + * config/global.features: + * config/global.mpb: + * config/lex.mpb: + * config/openssl.mpb: + * config/qt.mpb: + * config/qt_moc.mpb: + * config/rpc.mpb: + * config/zlib.mpb: + * modules/AutomakeProjectCreator.pm: + * modules/AutomakeWorkspaceCreator.pm: + * modules/BMakeProjectCreator.pm: + * modules/BMakeWorkspaceCreator.pm: + * modules/CBXProjectCreator.pm: + * modules/CBXWorkspaceCreator.pm: + * modules/Creator.pm: + * modules/Driver.pm: + * modules/EM3ProjectCreator.pm: + * modules/EM3WorkspaceCreator.pm: + * modules/FeatureParser.pm: + * modules/GHSProjectCreator.pm: + * modules/GHSWorkspaceCreator.pm: + * modules/GUID.pm: + * modules/HTMLProjectCreator.pm: + * modules/HTMLWorkspaceCreator.pm: + * modules/MPC.pm: + * modules/MWC.pm: + * modules/MakeProjectCreator.pm: + * modules/MakeWorkspaceCreator.pm: + * modules/NMakeProjectCreator.pm: + * modules/NMakeWorkspaceCreator.pm: + * modules/Options.pm: + * modules/OutputMessage.pm: + * modules/Parser.pm: + * modules/ProjectCreator.pm: + * modules/SLEProjectCreator.pm: + * modules/SLEWorkspaceCreator.pm: + * modules/StringProcessor.pm: + * modules/TemplateInputReader.pm: + * modules/TemplateParser.pm: + * modules/VA4ProjectCreator.pm: + * modules/VA4WorkspaceCreator.pm: + * modules/VC6ProjectCreator.pm: + * modules/VC6WorkspaceCreator.pm: + * modules/VC71ProjectCreator.pm: + * modules/VC71WorkspaceCreator.pm: + * modules/VC7ProjectCreator.pm: + * modules/VC7WorkspaceCreator.pm: + * modules/Version.pm: + * modules/WorkspaceCreator.pm: + * templates/automake.mpd: + * templates/bmake.mpd: + * templates/bmakecommon.mpt: + * templates/bmakedll.mpt: + * templates/bmakedllexe.mpt: + * templates/bmakelib.mpt: + * templates/bmakelibexe.mpt: + * templates/cbx.mpd: + * templates/cbxdll.mpt: + * templates/cbxexe.mpt: + * templates/common.mpt: + * templates/em3vcp.mpd: + * templates/em3vcpdll.mpt: + * templates/em3vcpdllexe.mpt: + * templates/em3vcplib.mpt: + * templates/em3vcplibexe.mpt: + * templates/ghs.mpd: + * templates/html.mpd: + * templates/make.mpd: + * templates/makedll.mpt: + * templates/makeexe.mpt: + * templates/nmake.mpd: + * templates/nmakedll.mpt: + * templates/nmakeexe.mpt: + * templates/sle.mpd: + * templates/sledll.mpt: + * templates/sleexe.mpt: + * templates/va4icc.mpd: + * templates/va4iccdll.mpt: + * templates/va4iccdllexe.mpt: + * templates/va4icclib.mpt: + * templates/va4icclibexe.mpt: + * templates/vc6dsp.mpd: + * templates/vc6dspdll.mpt: + * templates/vc6dspdllexe.mpt: + * templates/vc6dsplib.mpt: + * templates/vc6dsplibexe.mpt: + * templates/vc7.mpd: + * templates/vc7dll.mpt: + * templates/vc7exe.mpt: + * templates/vc7lib.mpt: + * templates/vc7libexe.mpt: + + Created a new repository for MPC. + +Local Variables: +add-log-time-format: current-time-string +End: |