diff options
Diffstat (limited to 'ace/config-hpux-11.00.h')
| -rw-r--r-- | ace/config-hpux-11.00.h | 421 |
1 files changed, 0 insertions, 421 deletions
diff --git a/ace/config-hpux-11.00.h b/ace/config-hpux-11.00.h deleted file mode 100644 index 24018cdfd61..00000000000 --- a/ace/config-hpux-11.00.h +++ /dev/null @@ -1,421 +0,0 @@ -/* -*- C++ -*- */ -// $Id$ - -// The following configuration file is designed to work for HP -// platforms running HP-UX 11.00 using aC++, CC, or gcc (2.95 and up). - -#ifndef ACE_CONFIG_H -#define ACE_CONFIG_H -#include "ace/pre.h" - -#if defined (__GNUG__) - -// config-g++-common.h undef's ACE_HAS_STRING_CLASS with -frepo, so -// this must appear before its #include. -# define ACE_HAS_STRING_CLASS - -# include "ace/config-g++-common.h" - -// gcc 2.95.2 supplies the ssize_t typedef. -# define ACE_HAS_SSIZE_T - -# include "ace/config-hpux11.h" - -#else - -// The following configuration section is designed to work for HP -// platforms running HP/UX 11.x with either of the HP C++ compilers. -// There isn't a predefined macro for all cases of the compilers that -// can be used to tell them apart from other compilers (e.g. __KCC, etc.) -// only to tell C++ from aC++, using the value of __cplusplus. -// -// NOTE - HP advises people on 11.x to use aC++ since the older C++ doesn't -// support 64-bit or kernel threads. So, though this file has the C++ info -// in it, it's copied from the 10.x file and hasn't been verified. - -// There are 2 compiler-specific sections, plus a 3rd for common to both. -// First is the HP C++ section... -# if __cplusplus < 199707L - -# define ACE_HAS_BROKEN_HPUX_TEMPLATES - -// Compiler can't handle calls like foo->operator T *() -# define ACE_HAS_BROKEN_CONVERSIONS - -// Necessary with some compilers to pass ACE_TTY_IO as parameter to -// DEV_Connector. -# define ACE_NEEDS_DEV_IO_CONVERSION - -// Compiler's template mechanism must see source code (i.e., .C files). -# define ACE_TEMPLATES_REQUIRE_SOURCE - -// Compiler's template mechanism requires the use of explicit C++ -// specializations for all used templates. -# define ACE_HAS_EXPLICIT_TEMPLATE_INSTANTIATION - -// The HP/UX compiler doesn't support volatile!!!! -# define volatile - -#else // aC++ definitions - -// Parts of TAO (at least) use __HP_aCC to detect this compiler, but the -// macro is not set until A.03.13. If it's not set, set it - it won't be an -// HP-advertised value, but we don't check the value/version - just whether -// it's set or not. -# if !defined (__HP_aCC) -# define __HP_aCC -# endif /* __HP_aCC */ - -// Precompiler needs extra flags to ignore "invalid #pragma directive" -# define ACE_CC_PREPROCESSOR_ARGS "-E +W 67" - -// Compiler supports ANSI casts -# define ACE_HAS_ANSI_CASTS - -// Compiler can't handle calls like foo->operator T *() -# define ACE_HAS_BROKEN_CONVERSIONS - -// Compiler supports C++ exception handling. However, the user can ask for this -// to be turned off. If so (using make exceptions=0) then this def is not set. -// By default, it is set in wrapper_macros.GNU. -// # define ACE_HAS_EXCEPTIONS 1 - -// If the platform_macros.GNU file turned on ACE_HAS_STANDARD_CPP_LIBRARY -// then we're using the -AA option, so we have standard C++ library, -// including the standard iostreams. Else, we have the old iostreams. -# if defined (ACE_HAS_STANDARD_CPP_LIBRARY) -# define ACE_USES_STD_NAMESPACE_FOR_STDCPP_LIB 1 -# else -# define ACE_USES_OLD_IOSTREAMS -# endif /* ACE_HAS_STANDARD_CPP_LIBRARY */ - -# define ACE_HAS_TYPENAME_KEYWORD - -// Compiler implements templates that support typedefs inside of classes -// used as formal arguments to a template class. -# define ACE_HAS_TEMPLATE_TYPEDEFS - -// This is legit for A.03.05 - not sure A.03.04, but it should be. -# define ACE_HAS_USING_KEYWORD - -// Platform lacks streambuf "linebuffered ()". -# define ACE_LACKS_LINEBUFFERED_STREAMBUF 1 - -// Lack of (and broken) support for placement operator delete is a known -// bug by HP, at least as of aC++ A.03.10. It may be fixed later, and if so -// this would change to be a #if against an appropriate value of __HP_aCC -# define ACE_LACKS_PLACEMENT_OPERATOR_DELETE - -// Compiler's 'new' throws exceptions on failure. However, if the user -// has explicitly turned off exception handling, we can't use the ACE_NEW_* -// macro variants that do try/catch, so don't set this. -# if defined (ACE_HAS_EXCEPTIONS) -# define ACE_NEW_THROWS_EXCEPTIONS -# endif /* ACE_HAS_EXCEPTIONS */ - -// Compiler's template mechanism must see source code (i.e., .C files). -# define ACE_TEMPLATES_REQUIRE_SOURCE - -// Compiler supports template specialization. -# define ACE_HAS_TEMPLATE_SPECIALIZATION -// ... and uses the template<> syntax -# define ACE_HAS_STD_TEMPLATE_SPECIALIZATION -# define ACE_HAS_STD_TEMPLATE_METHOD_SPECIALIZATION - -// Preprocessor needs some help with data types -# if defined (__LP64__) -# define ACE_SIZEOF_LONG 8 -# else -# define ACE_SIZEOF_LONG 4 -# endif - -# endif /* __cplusplus < 199707L */ - -// Compiler supports the ssize_t typedef. -# define ACE_HAS_SSIZE_T - -// Compiler doesn't handle 'signed char' correctly (used in ace/IOStream.h) -# define ACE_LACKS_SIGNED_CHAR - -#endif /* __GNUG__, HP */ - -// KCC Specific Section -#if defined(__KCC) -# include "ace/config-kcc-common.h" -# undef ACE_HAS_STD_TEMPLATE_METHOD_SPECIALIZATION -# undef ACE_CC_PREPROCESSOR_ARGS -#endif - -//********************************************************************* -// -// From here down is the compiler-INdependent OS settings. -// -//********************************************************************* - -// Compiling for HPUX. -#if !defined (HPUX) -#define HPUX -#endif /* HPUX */ -#define HPUX_11 - -#ifndef _HPUX_SOURCE -#define _HPUX_SOURCE -#endif - -#include /**/ <sys/stdsyms.h> - -//////////////////////////////////////////////////////////////////////////// -// -// General OS information - see README for more details on what they mean -// -/////////////////////////////////////////////////////////////////////////// - -// HP/UX needs to have these addresses in a special range. -// If this is on a 64-bit model, the default is to use 64-bit addressing. -// It can also be set so that the mapped region is shareable with 32-bit -// programs. To enable the 32/64 sharing, comment out the first definition -// of ACE_DEFAULT_BASE_ADDR and uncomment the two lines after it. -// Note - there's a compiler bug on aC++ A.03.04 in 64-bit mode which prevents -// these from working as-is. So, there's some hackery in Naming_Context.cpp -// and Memory_Pool.cpp which works around it. It requires the -// ACE_DEFAULT_BASE_ADDRL definition below - make sure it has the same -// value as what you use for ACE_DEFAULT_BASE_ADDR. This is allegedly fixed -// in A.03.10 on the June Applications CD. -#if defined (__LP64__) -# define ACE_DEFAULT_BASE_ADDR ((char *) 0x0000001100000000) -//# define ACE_DEFAULT_BASE_ADDR ((char *) 0x80000000) -//# define ACE_OS_EXTRA_MMAP_FLAGS MAP_ADDR32 - -# define ACE_DEFAULT_BASE_ADDRL (0x0000001100000000) -//# define ACE_DEFAULT_BASE_ADDRL (0x80000000) -#else -# define ACE_DEFAULT_BASE_ADDR ((char *) 0x80000000) -#endif /* __LP64__ */ - -// Platform can do async I/O (aio_*) -#define ACE_HAS_AIO_CALLS -// ... but seems to require this in order to keep from hanging. Needs some -// investigation, maybe with HP. John Mulhern determined this value -// empirically. YMMV. If it does vary, set it up in your own config.h which -// then includes the ACE-supplied config. -#if !defined (ACE_INFINITE) -# define ACE_INFINITE 10000000 -#endif - -// Manually tweak the malloc control block paddings to properly align -// things. -#define ACE_MALLOC_PADDING 16 -#define ACE_MALLOC_ALIGN 8 -#define ACE_PI_CONTROL_BLOCK_ALIGN_LONGS 3 - -// Compiler/platform contains the <sys/syscall.h> file. -#define ACE_HAS_SYSCALL_H -// But doesn't have a prototype for syscall() -#define ACE_LACKS_SYSCALL - -// Platform supports POSIX 1.b clock_gettime () -#define ACE_HAS_CLOCK_GETTIME - -// Prototypes for both signal() and struct sigaction are consistent. -#define ACE_HAS_CONSISTENT_SIGNAL_PROTOTYPES - -// Compiler/platform has correctly prototyped header files. -#define ACE_HAS_CPLUSPLUS_HEADERS - -// Compiler/platform has Dirent iterator functions. -#define ACE_HAS_DIRENT - -// Platform supports getpagesize() call -#define ACE_HAS_GETPAGESIZE -// But we define this just to be safe -#define ACE_PAGE_SIZE 4096 - -// Can run gperf on this platform (needed for TAO) -# define ACE_HAS_GPERF - -// Optimize ACE_Handle_Set for select(). -# define ACE_HAS_HANDLE_SET_OPTIMIZED_FOR_SELECT - -// Platform supports IP multicast -#define ACE_HAS_IP_MULTICAST - -// Platform supports recvmsg and sendmsg. -#define ACE_HAS_MSG - -// Platform's select() has non-const timeval argument -#define ACE_HAS_NONCONST_SELECT_TIMEVAL - -// Compiler/platform supports poll(). -#define ACE_HAS_POLL - -// Platform supports POSIX O_NONBLOCK semantics. -#define ACE_HAS_POSIX_NONBLOCK - -// Platform supports the POSIX struct timespec type -#define ACE_HAS_POSIX_TIME - -// Platform supports reentrant functions (all the POSIX *_r functions). -#define ACE_HAS_REENTRANT_FUNCTIONS -// ctime_r and asctime_r conform to POSIX.1c (2 param version) -#define ACE_HAS_2_PARAM_ASCTIME_R_AND_CTIME_R - -// HP-UX 11 has reentrant netdb functions. The catch is that the old -// functions (gethostbyname, etc.) are thread-safe and the _r versions are -// not used and will be removed at some point. So, define things so -// the _r versions are not used. This will slow things down a bit due to -// the extra mutex lock in the ACE_NETDBCALL_RETURN macro, and will be fixed -// in the future (problem ID P64). -#define ACE_LACKS_NETDB_REENTRANT_FUNCTIONS - -// Platform has shm_open -#define ACE_HAS_SHM_OPEN - -// Compiler/platform defines the sig_atomic_t typedef -#define ACE_HAS_SIG_ATOMIC_T - -// Platform supports SVR4 extended signals -#define ACE_HAS_SIGINFO_T - -// Platform doesn't detect a signal out of range unless it's way out of range. -#define ACE_HAS_SIGISMEMBER_BUG - -#define ACE_HAS_UALARM - -// Platform supports ucontext_t (which is used in the extended signal API). -#define ACE_HAS_UCONTEXT_T - -// Compiler/platform supports strerror (). -#define ACE_HAS_STRERROR - -// SunOS 4 style prototype for gettimeofday -#define ACE_HAS_SUNOS4_GETTIMEOFDAY - -// Platform supports SVR4 dynamic linking semantics, in 64-bit mode only. -// When used, this requires -ldl on the ACE library link line. -#ifdef __LP64__ -#define ACE_HAS_SVR4_DYNAMIC_LINKING -#endif - -// HP/UX has an undefined syscall for GETRUSAGE... -#define ACE_HAS_SYSCALL_GETRUSAGE -// Note, this only works if the flag is set above! -#define ACE_HAS_GETRUSAGE - -// Platform has the sigwait function in a header file -#define ACE_HAS_SIGWAIT -#define ACE_HAS_SIGTIMEDWAIT - -// Platform supports System V IPC (most versions of UNIX, but not Win32) -#define ACE_HAS_SYSV_IPC - -// accept() is thread-safe -#define ACE_HAS_THREAD_SAFE_ACCEPT - -// Platform has XPG4 wide character support -#define ACE_HAS_XPG4_MULTIBYTE_CHAR - -// Platform lacks a typedef for timespec_t, but has struct timespec -#define ACE_LACKS_TIMESPEC_T - -// Platform needs a timer skew value. It *may* vary by processor, but this -// one works. You can override it in your config.h file if needed. -// It's in units of microseconds. This value is 10 msec. -#if !defined (ACE_TIMER_SKEW) -# define ACE_TIMER_SKEW 10 * 1000 -#endif /* ACE_TIMER_SKEW */ - -// Shared library name/path components -#define ACE_DLL_SUFFIX ".sl" -#if defined (__LP64__) -# define ACE_LD_SEARCH_PATH "LD_LIBRARY_PATH" -#else -# define ACE_LD_SEARCH_PATH "SHLIB_PATH" -#endif /* __LP64__ */ - -////////////////////////////////////////////////////////////////////////// -// -// STREAMS information -// -////////////////////////////////////////////////////////////////////////// - -// Platform supports STREAMS -#define ACE_HAS_STREAMS -// Compiler/platform supports struct strbuf. -#define ACE_HAS_STRBUF_T -// But the putmsg signature doesn't have it as const... -// Well, it really does, but it depends on preprocessor defines. -#define ACE_LACKS_CONST_STRBUF_PTR - -// Platform supports STREAM pipes -// This is possible, but not by default - need to rebuild the kernel to -// get them enabled - see pipe(2) and "STREAMS/UX for the HP 9000" -// #define ACE_HAS_STREAM_PIPES - -///////////////////////////////////////////////////////////////////////// -// -// TLI/XTI information -// -//////////////////////////////////////////////////////////////////////// - -// Platform supports XTI (includes TLI), including SVR4 facilities. -#define ACE_HAS_TLI -// ACE_HAS_SVR4_TLI should work on HP-UX, but doesn't yet. Riverace -// problem ID P27. -//#define ACE_HAS_SVR4_TLI -// Platform uses <xti.h>, not tiuser.h -#define ACE_HAS_XTI -// But it has _terrno() outside the extern "C" stuff. -#define ACE_HAS_TIUSER_H_BROKEN_EXTERN_C -// Platform provides ACE_TLI function prototypes. -#define ACE_HAS_TLI_PROTOTYPES -// HP-UX 11.00 (at least at initial releases) has some busted macro defs -#define ACE_HAS_BROKEN_XTI_MACROS -// HP-UX 11 conforms to the XPG4 spec, which ACE calls broken for the -// errmsg not being const... -#define ACE_HAS_BROKEN_T_ERROR -// The definitions of TCP_NODELAY and TCP_MAXSEG conflict between -// sys/xti.h and netinet/tcp.h. -#define ACE_HAS_CONFLICTING_XTI_MACROS - -///////////////////////////////////////////////////////////////////////// -// -// Threads information. -// -// Use of threads is controlled by the 'threads' argument to make. See -// include/makeinclude/platform_hpux_aCC.GNU for details. If it's not set, -// the default is to enable it, since kernel threads are always available -// on HP-UX 11, as opposed to 10.x where it was optional software. -// -//////////////////////////////////////////////////////////////////////// - -#if defined (ACE_HAS_THREADS) -# if (ACE_HAS_THREADS == 0) -# undef ACE_HAS_THREADS -# endif /* ACE_HAS_THREADS == 0 */ -#else -# define ACE_HAS_THREADS -#endif /* ACE_HAS_THREADS */ - -#if defined (ACE_HAS_THREADS) - -# if !defined (ACE_MT_SAFE) -# define ACE_MT_SAFE 1 -# endif - -# define ACE_HAS_PTHREADS -# define ACE_HAS_PTHREADS_STD -# define ACE_HAS_PTHREADS_UNIX98_EXT - -# define ACE_HAS_THREAD_SPECIFIC_STORAGE -#endif /* ACE_HAS_THREADS */ - -#define ACE_HAS_POSIX_SEM - -// Turns off the tracing feature. -// To build with tracing enabled, make sure ACE_NTRACE is not defined -#if !defined (ACE_NTRACE) -#define ACE_NTRACE 1 -#endif /* ACE_NTRACE */ - -#include "ace/post.h" -#endif /* ACE_CONFIG_H */ |