diff options
Diffstat (limited to 'ace/config-win32-common.h')
| -rw-r--r-- | ace/config-win32-common.h | 633 |
1 files changed, 0 insertions, 633 deletions
diff --git a/ace/config-win32-common.h b/ace/config-win32-common.h deleted file mode 100644 index 9b53c7143fd..00000000000 --- a/ace/config-win32-common.h +++ /dev/null @@ -1,633 +0,0 @@ -/* -*- C++ -*- */ -// $Id$ - - -#ifndef ACE_CONFIG_WIN32_COMMON_H -#define ACE_CONFIG_WIN32_COMMON_H -#include /**/ "ace/pre.h" - -#ifndef ACE_CONFIG_WIN32_H -#error Use config-win32.h in config.h instead of this header -#endif /* ACE_CONFIG_WIN32_H */ - - -// Windows Mobile (CE) stuff is primarily further restrictions to what's -// in the rest of this file. Also, it defined ACE_HAS_WINCE, which is used -// in this file. -#if defined (_WIN32_WCE) -# include "ace/config-WinCE.h" -#endif /* _WIN32_WCE */ - -// Complain if WIN32 is not already defined. -#if !defined (WIN32) && !defined (ACE_HAS_WINCE) -# error Please define WIN32 in your project settings. -#endif - -#define ACE_WIN32 -#if defined (_WIN64) || defined (WIN64) -# define ACE_WIN64 -#endif /* _WIN64 || WIN64 */ - -// Define this if you're running NT >= 4.0 (Win2K == NT 5). -// Setting applies to : building ACE -// Runtime restrictions: System must be Windows NT => 4.0 -#if !defined (ACE_HAS_WINNT4) -# define ACE_HAS_WINNT4 1 /* assuming Win NT 4.0 or greater */ -#endif - -#if (defined (ACE_HAS_WINNT4) && ACE_HAS_WINNT4 != 0) -# if !defined (_WIN32_WINNT) -# define _WIN32_WINNT 0x0400 -# endif -#else -// On Win9X, a shared address SHOULD be between the 2nd and 3rd Gb. -// Note this will not work for NT: The addresses above 2Gb are -// reserved for the system, so this one will fail. -# if !defined (ACE_DEFAULT_BASE_ADDR) -# define ACE_DEFAULT_BASE_ADDR ((char*) ((2048UL+512UL)*1024UL*1024UL)) -# endif -#endif - -// If the invoking procedure turned off debugging by setting NDEBUG, then -// also set ACE_NDEBUG, unless the user has already set it. -#if defined (NDEBUG) -# if !defined (ACE_NDEBUG) -# define ACE_NDEBUG -# endif /* ACE_NDEBUG */ -#endif /* NDEBUG */ - -// Define ACE_HAS_MFC to 1, if you want ACE to use CWinThread. This should -// be defined, if your application uses MFC. -// Setting applies to : building ACE -// Runtime restrictions: MFC DLLs must be installed -// Additonal notes : If both ACE_HAS_MFC and ACE_MT_SAFE are -// defined, the MFC DLL (not the static lib) -// will be used from ACE. -#if !defined (ACE_HAS_MFC) -# define ACE_HAS_MFC 0 -#endif - -// ACE_USES_STATIC_MFC always implies ACE_HAS_MFC -#if defined (ACE_USES_STATIC_MFC) -# if defined (ACE_HAS_MFC) -# undef ACE_HAS_MFC -# endif -# define ACE_HAS_MFC 1 -#endif /* ACE_USES_STATIC_MFC */ - -// Define ACE_HAS_STRICT to 1 in your config.h file if you want to use -// STRICT type checking. It is disabled by default because it will -// break existing application code. However, if ACE_HAS_MFC is turned on, -// ACE_HAS_STRICT is required by MFC. -// Setting applies to : building ACE, linking with ACE -// Runtime restrictions: - -#if !defined (ACE_HAS_STRICT) -# define ACE_HAS_STRICT 0 -#endif - -// MFC itself defines STRICT. -#if defined (ACE_HAS_MFC) && (ACE_HAS_MFC != 0) -# undef ACE_HAS_STRICT -# define ACE_HAS_STRICT 1 -#endif - -// Turn off the following define if you want to disable threading. -// Compile using multi-thread libraries. -// Setting applies to : building ACE, linking with ACE -// Runtime restrictions: multithreaded runtime DLL must be installed -#if !defined (ACE_MT_SAFE) -# define ACE_MT_SAFE 1 -#endif - -// Build ACE services as DLLs. If you write a library and want it to -// use ACE_Svc_Export, this will cause those macros to build dlls. If -// you want your ACE service to be a static library, comment out this -// line. As far as I know, the only reason to have a library be an -// ACE "service" is to leverage the ACE_Svc_Export macros. It's just -// as easy to define your own export macros. -// #if !defined (ACE_SVC_HAS_DLL) -// # define ACE_SVC_HAS_DLL 1 -// #endif - -// Define the special export macros needed to export symbols outside a dll -#if !defined(__BORLANDC__) && !defined(__IBMCPP__) -#define ACE_HAS_CUSTOM_EXPORT_MACROS -#define ACE_Proper_Export_Flag __declspec (dllexport) -#define ACE_Proper_Import_Flag __declspec (dllimport) -#define ACE_EXPORT_SINGLETON_DECLARATION(T) template class __declspec (dllexport) T -#define ACE_EXPORT_SINGLETON_DECLARE(SINGLETON_TYPE, CLASS, LOCK) template class __declspec (dllexport) SINGLETON_TYPE<CLASS, LOCK>; -#define ACE_IMPORT_SINGLETON_DECLARATION(T) extern template class T -#define ACE_IMPORT_SINGLETON_DECLARE(SINGLETON_TYPE, CLASS, LOCK) extern template class SINGLETON_TYPE <CLASS, LOCK>; -#endif /* !__BORLANDC__ */ - -// Define ACE_HAS_WINSOCK2 to 0 in your config.h file if you do *not* -// want to compile with WinSock 2.0. -// Setting applies to : building ACE -// Runtime restrictions: winsock2 must be installed. -// #define ACE_HAS_WINSOCK2 0 - -// By default, we use non-static object manager on Win32. That is, -// the object manager is allocated in main's stack memory. If this -// does not suit your need, i.e., if your programs depend on the use -// of static object manager, you neet to disable the behavior by adding -// -// #undef ACE_HAS_NONSTATIC_OBJECT_MANAGER -// -// in the config.h after including config-win32.h -// -// MFC users: the main function is defined within a MFC library and -// therefore, ACE won't be able to meddle with main function and -// instantiate the non-static object manager for you. To solve the -// problem, you'll need to instantiate the ACE_Object_Manager by -// either: -// -// 1. Using static object manager (as described above), however, using -// the non-static object manager is prefered, therefore, -// 2. Instantiate the non-static object manager yourself by either 1) -// call ACE::init () at the beginning and ACE::fini () at the end, -// _or_ 2) instantiate the ACE_Object_Manager in your CWinApp -// derived class. -// -// Optionally, you can #define -// ACE_DOESNT_INSTANTIATE_NONSTATIC_OBJECT_MANAGER in your -// ace/config.h and always take care of the business by yourself. -// ACE_DOESNT_INSTANTIATE_NONSTATIC_OBJECT_MANAGER has no effect when -// using static object managers. -#if !defined (ACE_HAS_NONSTATIC_OBJECT_MANAGER) -# define ACE_HAS_NONSTATIC_OBJECT_MANAGER -#elif (ACE_HAS_NONSTATIC_OBJECT_MANAGER == 0) -# undef ACE_HAS_NONSTATIC_OBJECT_MANAGER -#endif /* ACE_HAS_NONSTATIC_OBJECT_MANAGER */ - -#define ACE_HAS_GPERF - -// By default, don't include RCS Id strings in object code. -#if !defined (ACE_USE_RCSID) -# define ACE_USE_RCSID 0 -#endif /* ! ACE_USE_RCSID */ - -// ---------------- platform features or lack of them ------------- - -// By default WIN32 has FD_SETSIZE of 64, which places the limit -// between 61 and 64 on the number of clients a server using the -// Select Reactor can support at the same time (i.e., 64 - standard in, -// out, error). Here we raise the limit to 1024. Adjust the definition -// below if you need to raise or lower it. - -#if !defined (FD_SETSIZE) -#define FD_SETSIZE 1024 -#endif /* FD_SETSIZE */ - - -// Windows doesn't like 65536 ;-) If 65536 is specified, it is -// silently ignored by the OS, i.e., setsockopt does not fail, and you -// get stuck with the default size of 8k. -#define ACE_DEFAULT_MAX_SOCKET_BUFSIZ 65535 - -// It seems like Win32 does not have a limit on the number of buffers -// that can be transferred by the scatter/gather type of I/O -// functions, e.g., WSASend and WSARecv. We are setting this to be 64 -// for now. The typically use case is to create an I/O vector array -// of size ACE_IOV_MAX on the stack and then filled in. Note that we -// probably don't want too big a value for ACE_IOV_MAX since it may -// mostly go to waste or the size of the activation record may become -// excessively large. - -#if !defined (ACE_IOV_MAX) -#if (defined (ACE_HAS_WINNT4) && (ACE_HAS_WINNT4 != 0)) -# define ACE_IOV_MAX 64 -#else -// Win 95/98/me need a smaller value than WinNT versions of Windows. -# define ACE_IOV_MAX 16 -#endif /* #if (defined (ACE_HAS_WINNT4) && (ACE_HAS_WINNT4 != 0)) */ -#endif /* ACE_IOV_MAX */ - -#if !defined (ACE_HAS_WINCE) -// Platform supports pread() and pwrite() -# define ACE_HAS_P_READ_WRITE -#endif /* ! ACE_HAS_WINCE */ - -#if !defined (__MINGW32__) -# define ACE_HAS_WIN32_STRUCTURAL_EXCEPTIONS -#endif /* __MINGW32__ */ - -#define ACE_DEFAULT_THREAD_PRIORITY 0 - -#define ACE_HAS_DIRENT -#define ACE_HAS_MSG -#define ACE_HAS_RECURSIVE_MUTEXES -#define ACE_HAS_SOCKADDR_MSG_NAME -#define ACE_HAS_THREAD_SAFE_ACCEPT - -/* LACKS dir-related facilities */ -#define ACE_LACKS_READDIR_R -#define ACE_LACKS_REWINDDIR -#define ACE_LACKS_SEEKDIR -#define ACE_LACKS_TELLDIR - -/* LACKS gid/pid/sid/uid facilities */ -#define ACE_LACKS_GETPGID -#define ACE_LACKS_GETPPID -#define ACE_LACKS_SETPGID -#define ACE_LACKS_SETREGID -#define ACE_LACKS_SETREUID -#define ACE_LACKS_SETSID -#define ACE_LACKS_SETEGID -#define ACE_LACKS_SETUID -#define ACE_LACKS_SETEUID -#define ACE_LACKS_GETGID -#define ACE_LACKS_GETEGID -#define ACE_LACKS_GETUID -#define ACE_LACKS_GETEUID -#define ACE_LACKS_SETGID - -/* LACKS miscellaneous */ -#define ACE_LACKS_ALARM -#define ACE_LACKS_ARPA_INET_H -#define ACE_LACKS_DUP2 -#define ACE_LACKS_FORK -#define ACE_LACKS_GETHOSTENT -#define ACE_LACKS_GETOPT -#define ACE_LACKS_KILL -#define ACE_LACKS_INET_ATON -#define ACE_LACKS_MADVISE -#define ACE_LACKS_MKFIFO -#define ACE_LACKS_MODE_MASKS -#define ACE_LACKS_PTHREAD_H -#define ACE_LACKS_PWD_FUNCTIONS -#define ACE_LACKS_READLINK -#define ACE_LACKS_RLIMIT -#define ACE_LACKS_SBRK -#define ACE_LACKS_SCHED_H -#define ACE_LACKS_SEMBUF_T -#define ACE_LACKS_SIGACTION -#define ACE_LACKS_SIGSET -#define ACE_LACKS_SOCKETPAIR -#define ACE_LACKS_SUSECONDS_T -#define ACE_LACKS_USECONDS_T -#define ACE_LACKS_SYS_PARAM_H -#define ACE_LACKS_SYS_SYSCTL_H -#define ACE_LACKS_SYSCONF -#define ACE_LACKS_SYSV_SHMEM -#define ACE_LACKS_UNISTD_H -#define ACE_LACKS_UNIX_SIGNALS -#define ACE_LACKS_UNIX_SYSLOG -#define ACE_LACKS_UTSNAME_T -#define ACE_LACKS_UNAME -#define ACE_LACKS_WAIT - -#define ACE_HAS_SNPRINTF -#define ACE_HAS_VFWPRINTF -#define ACE_HAS_VSWPRINTF - -#define ACE_MKDIR_LACKS_MODE - -#define ACE_SIZEOF_LONG_LONG 8 -// Green Hills Native x86 does not support __int64 keyword -// Neither does mingw32. -#if !defined (ACE_LACKS_LONGLONG_T) && !defined (__MINGW32__) -#define ACE_INT64_TYPE signed __int64 -#define ACE_UINT64_TYPE unsigned __int64 -#endif /* (ghs) */ - -#if defined (__MINGW32__) -#define ACE_INT64_TYPE signed long long -#define ACE_UINT64_TYPE unsigned long long -#endif - -// Optimize ACE_Handle_Set for select(). -#define ACE_HAS_HANDLE_SET_OPTIMIZED_FOR_SELECT - -// Win32 has wide-char support. Use of the compiler-defined wchar_t type -// is controlled in compiler configs since it's a compiler switch. -// Additionally, if the user selected use of wide chars (by setting either -// ACE_USES_WCHAR or UNICODE) make sure both are enabled. -#define ACE_HAS_WCHAR -#if defined (ACE_USES_WCHAR) -# ifndef UNICODE -# define UNICODE -# endif -#endif /* ACE_USES_WCHAR */ -#if defined (UNICODE) && !defined (ACE_USES_WCHAR) -# define ACE_USES_WCHAR -#endif /* UNICODE && !ACE_USES_WCHAR */ - -// Compiler/platform correctly calls init()/fini() for shared -// libraries. - applied for DLLs ? -//define ACE_HAS_AUTOMATIC_INIT_FINI - -// Platform supports POSIX O_NONBLOCK semantics. -//define ACE_HAS_POSIX_NONBLOCK - -// Platform contains <poll.h>. -//define ACE_HAS_POLL - -// Platform supports the /proc file system. -//define ACE_HAS_PROC_FS - -#if (defined (ACE_HAS_WINNT4) && (ACE_HAS_WINNT4 != 0)) -// Platform supports the rusage struct. -#define ACE_HAS_GETRUSAGE -#endif /* (defined (ACE_HAS_WINNT4) && (ACE_HAS_WINNT4 != 0)) */ - -// Compiler/platform supports SVR4 signal typedef. -//define ACE_HAS_SVR4_SIGNAL_T - -// Platform provides <sys/filio.h> header. -//define ACE_HAS_SYS_FILIO_H - -// Compiler/platform supports sys_siglist array. -//define ACE_HAS_SYS_SIGLIST - -// Platform supports ACE_TLI timod STREAMS module. -//define ACE_HAS_TIMOD_H - -// Platform supports ACE_TLI tiuser header. -//define ACE_HAS_TIUSER_H - -// Platform provides ACE_TLI function prototypes. -// For Win32, this is not really true, but saves a lot of hassle! -#define ACE_HAS_TLI_PROTOTYPES - -// Platform supports ACE_TLI. -//define ACE_HAS_TLI - -// I'm pretty sure NT lacks these -#define ACE_LACKS_UNIX_DOMAIN_SOCKETS - -// Windows NT needs readv() and writev() -#define ACE_LACKS_WRITEV -#define ACE_LACKS_READV - -#define ACE_LACKS_COND_T -#define ACE_LACKS_RWLOCK_T - -#define ACE_LACKS_KEY_T - -// No system support for replacing any previous mappings. -#define ACE_LACKS_AUTO_MMAP_REPLACEMENT - -// If you want to use highres timers, ensure that -// Build.Settings.C++.CodeGeneration.Processor is -// set to Pentium ! -#if !defined(ACE_HAS_PENTIUM) && (_M_IX86 > 400) -# define ACE_HAS_PENTIUM -#endif - -#if defined(ACE_MT_SAFE) && (ACE_MT_SAFE != 0) -// Platform supports threads. -# define ACE_HAS_THREADS - -// Platform supports Windows32 threads. -# define ACE_HAS_WTHREADS - -// Compiler/platform has thread-specific storage -# define ACE_HAS_THREAD_SPECIFIC_STORAGE - -// Win32 doesn't have fcntl -#define ACE_LACKS_FCNTL - -#endif /* ACE_MT_SAFE && ACE_MT_SAFE != 0 */ - -#if !defined(_DEBUG) -// If we are making a release, and the user has not specified -// inline directives, we will default to inline -# if ! defined (__ACE_INLINE__) -# define __ACE_INLINE__ 1 -# endif /* __ACE_INLINE__ */ -#endif - -// If __ACE_INLINE__ is defined to be 0, we will undefine it -#if defined (__ACE_INLINE__) && (__ACE_INLINE__ == 0) -# undef __ACE_INLINE__ -#endif /* __ACE_INLINE__ */ - -// We are build ACE and want to use MFC (multithreaded) -#if defined(ACE_HAS_MFC) && (ACE_HAS_MFC != 0) && defined (_MT) -# if (ACE_HAS_DLL != 0) && defined(ACE_BUILD_DLL) && !defined (_WINDLL) -// force multithreaded MFC DLL -# define _WINDLL -# endif /* _AFXDLL */ -# if !defined (_AFXDLL) && !defined (ACE_USES_STATIC_MFC) -# define _AFXDLL -# endif /* _AFXDLL */ -#endif - -// <windows.h> and MFC's <afxwin.h> are mutually -// incompatible. <windows.h> is brain-dead about MFC; it doesn't check -// to see whether MFC stuff is anticipated or already in progress -// before doing its thing. ACE needs (practically always) <winsock.h>, -// and winsock in turn needs support either from windows.h or from -// afxwin.h. One or the other, not both. -// -// The MSVC++ V4.0 environment defines preprocessor macros that -// indicate the programmer has chosen something from the -// Build-->Settings-->General-->MFC combo-box. <afxwin.h> defines a -// macro itself to protect against double inclusion. We'll take -// advantage of all this to select the proper support for winsock. - -// trl 26-July-1996 - -// This is necessary since MFC users apparently can't #include -// <windows.h> directly. -#if defined (ACE_HAS_MFC) && (ACE_HAS_MFC != 0) -# include /**/ <afxwin.h> /* He is doing MFC */ -// Windows.h will be included via afxwin.h->afx.h->afx_ver_.h->afxv_w32.h -// #define _INC_WINDOWS // Prevent winsock.h from including windows.h -# if defined (ACE_HAS_WINCE) -# include /**/ <wce.h> -# endif /* ACE_HAS_WINCE */ -#elif defined (ACE_HAS_WINCE) -# include /**/ <windows.h> -#endif - -#if !defined (_INC_WINDOWS) /* Already include windows.h ? */ -// Must define strict before including windows.h ! -# if defined (ACE_HAS_STRICT) && (ACE_HAS_STRICT != 0) && !defined (STRICT) -# define STRICT 1 -# endif /* ACE_HAS_STRICT */ - -# if !defined (WIN32_LEAN_AND_MEAN) && !defined (ACE_NO_WIN32_LEAN_AND_MEAN) -# define WIN32_LEAN_AND_MEAN -# endif /* WIN32_LEAN_AND_MEAN */ - -#endif /* !defined (_INC_WINDOWS) */ - -// Always use WS2 when available -#if !defined(ACE_HAS_WINSOCK2) -# define ACE_HAS_WINSOCK2 1 -#endif /* !defined(ACE_HAS_WINSOCK2) */ - - -#if defined (ACE_HAS_WINSOCK2) && (ACE_HAS_WINSOCK2 != 0) -# if !defined (_WINSOCK2API_) -// will also include windows.h, if not present -# include /**/ <winsock2.h> -// WinCE 4 doesn't define the Exxx values without the WSA prefix, so do that -// here. This is all lifted from the #if 0'd out part of winsock2.h. -# if defined (UNDER_CE) -# define EWOULDBLOCK WSAEWOULDBLOCK -# define EINPROGRESS WSAEINPROGRESS -# define EALREADY WSAEALREADY -# define ENOTSOCK WSAENOTSOCK -# define EDESTADDRREQ WSAEDESTADDRREQ -# define EMSGSIZE WSAEMSGSIZE -# define EPROTOTYPE WSAEPROTOTYPE -# define ENOPROTOOPT WSAENOPROTOOPT -# define EPROTONOSUPPORT WSAEPROTONOSUPPORT -# define ESOCKTNOSUPPORT WSAESOCKTNOSUPPORT -# define EOPNOTSUPP WSAEOPNOTSUPP -# define EPFNOSUPPORT WSAEPFNOSUPPORT -# define EAFNOSUPPORT WSAEAFNOSUPPORT -# define EADDRINUSE WSAEADDRINUSE -# define EADDRNOTAVAIL WSAEADDRNOTAVAIL -# define ENETDOWN WSAENETDOWN -# define ENETUNREACH WSAENETUNREACH -# define ENETRESET WSAENETRESET -# define ECONNABORTED WSAECONNABORTED -# define ECONNRESET WSAECONNRESET -# define ENOBUFS WSAENOBUFS -# define EISCONN WSAEISCONN -# define ENOTCONN WSAENOTCONN -# define ESHUTDOWN WSAESHUTDOWN -# define ETOOMANYREFS WSAETOOMANYREFS -# define ETIMEDOUT WSAETIMEDOUT -# define ECONNREFUSED WSAECONNREFUSED -# define ELOOP WSAELOOP -# define ENAMETOOLONG WSAENAMETOOLONG -# define EHOSTDOWN WSAEHOSTDOWN -# define EHOSTUNREACH WSAEHOSTUNREACH -# define ENOTEMPTY WSAENOTEMPTY -# define EPROCLIM WSAEPROCLIM -# define EUSERS WSAEUSERS -# define EDQUOT WSAEDQUOT -# define ESTALE WSAESTALE -# define EREMOTE WSAEREMOTE -# endif /* UNDER_CE */ -# endif /* _WINSOCK2API */ - -# if defined (ACE_HAS_FORE_ATM_WS2) -# include /**/ <ws2atm.h> -# endif /*ACE_HAS_FORE_ATM_WS2 */ - -// CE doesn't have Microsoft Winsock 2 extensions -# if !defined _MSWSOCK_ && !defined (ACE_HAS_WINCE) -# include /**/ <mswsock.h> -# endif /* _MSWSOCK_ */ - -# if defined (_MSC_VER) -# if defined (ACE_HAS_WINCE) -# pragma comment(lib, "ws2.lib") -# else -# pragma comment(lib, "ws2_32.lib") -# pragma comment(lib, "mswsock.lib") -# endif /* ACE_HAS_WINCE */ -# endif /* _MSC_VER */ - -# define ACE_WSOCK_VERSION 2, 0 -#else -# if !defined (_WINSOCKAPI_) - // will also include windows.h, if not present -# include /**/ <winsock.h> -# endif /* _WINSOCKAPI */ - -// PharLap ETS has its own winsock lib, so don't grab the one -// supplied with the OS. -# if defined (_MSC_VER) && !defined (UNDER_CE) && !defined (ACE_HAS_PHARLAP) -# pragma comment(lib, "wsock32.lib") -# endif /* _MSC_VER */ - -// We can't use recvmsg and sendmsg unless WinSock 2 is available -# define ACE_LACKS_RECVMSG -# define ACE_LACKS_SENDMSG - -// Version 1.1 of WinSock -# define ACE_WSOCK_VERSION 1, 1 -#endif /* ACE_HAS_WINSOCK2 */ - -// Platform supports IP multicast on Winsock 2 -#if defined (ACE_HAS_WINSOCK2) && (ACE_HAS_WINSOCK2 != 0) -# define ACE_HAS_IP_MULTICAST -#endif /* ACE_HAS_WINSOCK2 */ - -#if (defined (ACE_HAS_WINNT4) && (ACE_HAS_WINNT4 != 0)) || \ - defined (ACE_HAS_WINCE) /* WinCE 3 has these */ -# if !defined (ACE_HAS_WINCE) || defined (PPC) /* CE only on some CPUs */ -# define ACE_HAS_INTERLOCKED_EXCHANGEADD -# endif -# define ACE_HAS_WIN32_TRYLOCK -#endif - -#if (defined (ACE_HAS_WINNT4) && (ACE_HAS_WINNT4 != 0)) && !defined (ACE_USES_WINCE_SEMA_SIMULATION) -# define ACE_HAS_SIGNAL_OBJECT_AND_WAIT - -// If CancelIO is undefined get the updated sp2-sdk from MS -# define ACE_HAS_CANCEL_IO -#endif /* (defined (ACE_HAS_WINNT4) && (ACE_HAS_WINNT4 != 0)) && !defined (ACE_USES_WINCE_SEMA_SIMULATION) */ - -#if !defined (ACE_SEH_DEFAULT_EXCEPTION_HANDLING_ACTION) -# define ACE_SEH_DEFAULT_EXCEPTION_HANDLING_ACTION EXCEPTION_CONTINUE_SEARCH -#endif /* ACE_SEH_DEFAULT_EXCEPTION_HANDLING_ACTION */ - -// ACE_HAS_QOS is defined in the qos.mpb base project. -// If qos=1 in default.features, then this macro will be defined. -#if defined (ACE_HAS_QOS) && !defined (ACE_HAS_WINSOCK2_GQOS) -# if defined (WINSOCK_VERSION) -# define ACE_HAS_WINSOCK2_GQOS 1 -# endif /* WINSOCK_VERSION */ -#endif /* ACE_HAS_WINSOCK2_GQOS */ - -#define ACE_SIZEOF_WCHAR 2 -#define ACE_HAS_MUTEX_TIMEOUTS -#define ACE_LACKS_STRUCT_DIR -#define ACE_LACKS_OPENDIR -#define ACE_LACKS_CLOSEDIR -#define ACE_LACKS_READDIR -#define ACE_LACKS_MKSTEMP -#define ACE_LACKS_LSTAT -// Looks like Win32 has a non-const swab function -#define ACE_HAS_NONCONST_SWAB - -// If we are using winsock2 then the SO_REUSEADDR feature is broken -// SO_REUSEADDR=1 behaves like SO_REUSEPORT=1. (SO_REUSEPORT is an -// extension to sockets on some platforms) -// We define SO_REUSEPORT here so that ACE_OS::setsockopt() can still -// allow the user to specify that a socketaddr can *always* be reused. -#if defined (ACE_HAS_WINSOCK2) && ACE_HAS_WINSOCK2 != 0 && ! defined(SO_REUSEPORT) -#define SO_REUSEPORT 0x0400 // We just have to pick a value that won't conflict -#endif - -#if defined (ACE_WIN64) -// Data must be aligned on 8-byte boundaries, at a minimum. -# define ACE_MALLOC_ALIGN 8 -// Void pointers are 8 bytes -# define ACE_SIZEOF_VOID_P 8 -#endif /* ACE_WIN64 */ - -#if !defined (ACE_DISABLES_THREAD_LIBRARY_CALLS) -# define ACE_DISABLES_THREAD_LIBRARY_CALLS 0 -#endif /* ACE_DISABLES_THREAD_LIBRARY_CALLS */ - -#if !defined (ACE_HAS_WINCE) && !defined (ACE_HAS_PHARLAP) -# define ACE_HAS_LOG_MSG_NT_EVENT_LOG -#endif /* !ACE_HAS_WINCE && !ACE_HAS_PHARLAP */ - -#if !defined (ACE_HAS_WINCE) -# define ACE_HAS_LLSEEK -#endif /* !ACE_HAS_WINCE */ - -// Needed for obtaining the MAC address -// I dont believe this will work under CE, notice the -// check for ACE_HAS_WINCE. -# if !defined (ACE_HAS_WINCE) -# include <nb30.h> -# if defined (_MSC_VER) -# pragma comment(lib, "netapi32.lib") // needed for obtaing MACaddress -# endif -# endif /* !ACE_HAS_WINCE */ - -#if !defined (ACE_DEFAULT_BACKLOG) -# define ACE_DEFAULT_BACKLOG SOMAXCONN -#endif /* ACE_DEFAULT_BACKLOG */ - -#include /**/ "ace/post.h" -#endif /* ACE_CONFIG_WIN32_COMMON_H */ |