diff options
Diffstat (limited to 'include/makeinclude/platform_hpux_aCC.GNU')
-rw-r--r-- | include/makeinclude/platform_hpux_aCC.GNU | 215 |
1 files changed, 0 insertions, 215 deletions
diff --git a/include/makeinclude/platform_hpux_aCC.GNU b/include/makeinclude/platform_hpux_aCC.GNU deleted file mode 100644 index 026de1cb662..00000000000 --- a/include/makeinclude/platform_hpux_aCC.GNU +++ /dev/null @@ -1,215 +0,0 @@ -# $Id$ -# -# This is for the HP-UX 10.x and 11.x using the aC++ compiler. -# -# For 10.x, most of the difference for threaded vs. non-threaded is -# contained in ace/config-hpux-10.x.h. However, to build without threads, -# you should run the make with "threads=0" since the default is to build -# with threads. -# -# HP-UX 11 supports both 32-bit and 64-bit builds, regardless of which -# architecture the build is done on. This file is set up to build native -# to the machine it's running on. To cross-build for another platform, add -# "buildbits=32" to make a 32-bit build, and "buildbits=64" to do a 64-bit -# build. Note that if you explicitly specify a 64-bit build, the option -# -Wl,+vnocompatwarnings is added to shut up the "At least one PA 2.0 object -# file detected..." messages. - -ifeq (,$(buildbits)) - buildbits = 0 -endif -ifeq (,$(debug)) - debug = 1 -endif -ifeq (,$(distrib)) - distrib = 0 -endif -ifeq (,$(exceptions)) - exceptions = 1 -endif -ifeq (,$(optimize)) - optimize = 0 -endif -ifeq (,$(threads)) - threads = 1 -endif -ifeq (,$(versioned_so)) - versioned_so = 0 -endif - -# First, extract the OS version number. -HPVERS_WORDS := $(subst ., ,$(shell uname -r)) -HPMODEL := $(shell uname -m)) -HPUX_VERS := $(join $(word 2,$(HPVERS_WORDS)),$(word 3,$(HPVERS_WORDS))) -# -CC = /bin/cc -CXX = aCC - -# Determine compiler version -CXXVERS_WORDS := $(subst ., , $(shell $(CXX) -V 2>&1)) -CXXMINORVERS := $(word 8, $(CXXVERS_WORDS)) -CXXMAJORVERS := $(word 7, $(CXXVERS_WORDS)) - -ifeq (,$(stdcpplib)) -# If the user didn't explicitly set stdcpplib, assume that the compiler -# can do -AA, unless it's a .2x version (e.g., 03.24). 03.27 can do -AA, -# so check for that one explicitly and enable it if so. - ifeq (,$(filter 2%,$(CXXMINORVERS))) - stdcpplib = 1 - else - ifeq (27,$(CXXMINORVERS)) - stdcpplib = 1 - else - stdcpplib = 0 - endif - endif -endif - -ifeq (1,$(stdcpplib)) - CCFLAGS += -AA - ifeq (03,$(CXXMAJORVERS)) - # Warning 930 is spurious when new(std::nothrow) is used. Reported to HP - # as support call 3201224717. (Steve Huston, 23-Nov-2002) - CCFLAGS += +W930 - endif -# Compile errors using -AA and +noeh together - HP problem report -# JAGad12608, fix slated for Dec 2001 Release -- Steve Huston, April 10, 2001. -# If you still have problems with this area, uncomment the following line: -# exceptions = 1 -endif - -ifeq (05,$(CXXMAJORVERS)) - # Warnings about binary incompatiblity - CCFLAGS += +W1016,1031 -endif - -# Set the appropriate preprocessor defs for threading based on OS version -# and specified compiler options. -ifeq ($(threads),1) - THR_DEFS = -DACE_HAS_THREADS -D_REENTRANT - - # Different for v2 vs. v1 C++ library selection. - ifeq (1,$(stdcpplib)) - THR_DEFS += -D_RWSTD_MULTI_THREAD - else - THR_DEFS += -DRWSTD_MULTI_THREAD -D_THREAD_SAFE - endif - - # For HP-UX 11.x, choose kernel threads over CMA (user) threads. - ifeq ($(word 2,$(HPVERS_WORDS)), 11) - THR_DEFS += -D_POSIX_C_SOURCE=199506L - endif -else - THR_DEFS = -DACE_HAS_THREADS=0 - # On HP-UX 11, even without building for threads, the *_r reentrant - # functions are available, and _REENTRANT enables them. - ifeq ($(word 2,$(HPVERS_WORDS)), 11) - THR_DEFS += -D_REENTRANT - endif -endif - -ifeq ($(HPMODEL), ia64) - itanium = 1 -endif - -ifeq (03,$(CXXMAJORVERS)) - # Suppress Warning 302 ((...) parameter list is a non-portable feature) - CCFLAGS += +W302 -endif -CPPFLAGS += $(THR_DEFS) -D_HPUX_SOURCE -DHPUX_VERS=$(HPUX_VERS) -DACE_LACKS_PRAGMA_ONCE - -# If exception support is explicitly disabled, tell the compiler. -# This is not recommended since the run-time library can throw exceptions. -ifneq ($(exceptions),1) -CCFLAGS += +noeh -endif - -# Additionally, on HP-UX 10.20, suppress 495 to shut up the warnings from -# the system header files. 667 is also suppressed, but the compiler still -# tells you there was a future error, but at least you can pick out any real -# errors by quickly scanning the output. 829 is suppressed because the -# system headers have offending string literals assigned to char *. -ifeq ($(word 2,$(HPVERS_WORDS)), 10) -CCFLAGS += +W495,667,829,908 -endif -DCCFLAGS += -g -DLD = $(CXX) $(CCFLAGS) -LD = $(CXX) -OCCFLAGS = -O -PIC = +Z - -PRELIB = $(COMPILE.cc) $^ -AR = /usr/ccs/bin/ar -ARFLAGS = ruv -RANLIB = echo -LDFLAGS = -Wl,+s -z -SOFLAGS += -b - -ifeq ($(distrib),1) - -ifeq ($(word 2,$(HPVERS_WORDS)), 10) -SOFLAGS += -Wl,-x -Wl,+h/usr/lib/$(@F) -else -ifeq ($(buildbits),32) -SOFLAGS += -Wl,-x -Wl,+h$(@F) -Wl,+b/usr/lib -endif -ifeq ($(buildbits),64) -SOFLAGS += -Wl,-x -Wl,+h$(@F) -Wl,+b/usr/lib/pa20_64 -endif -endif - -endif - -SOEXT = sl - -ifeq ($(buildbits),32) - ifeq ($(itanium),1) - CCFLAGS += +DD32 - else - CCFLAGS += +DA1.1 +DS1.1 - endif -else -ifeq ($(buildbits),64) - ifeq ($(itanium),1) - CCFLAGS += +DD64 - else - ifeq ($(word 2,$(HPVERS_WORDS)), 11) - ## Without the W, it isn't really a 64-bit build - CCFLAGS += +DA2.0W +DS2.0W - else - CCFLAGS += +DA2.0 +DS2.0 - endif - endif -LDFLAGS += -Wl,+vnocompatwarnings -else - ifneq ($(itanium),1) - # HP aCC on Itanium doesn't support this option, defaults to 32bit then. - CCFLAGS += +DAportable - endif -endif -endif - -# -# Grab the appropriate libraries based on the version of HP-UX we're building -# on and whether or not thread support is being used. -# -ifeq ($(word 2,$(HPVERS_WORDS)), 11) - -#11.x: -ifeq ($(threads),1) -## -L./ must directly preceed the system libraries for 64-bit builds -## with aCC 3.27. Without this change, libpthread.sl can not be found. -LIBS += -L./ -lxti -lpthread -lrt -ldld -else -LIBS += -lxti -lrt -ldld -endif - -else - -# 10.x: -LIBS += -lxti -ldld -ifeq ($(threads),1) -LIBS += -lcma -endif - -endif |