diff options
Diffstat (limited to 'include')
76 files changed, 0 insertions, 4140 deletions
diff --git a/include/makeinclude/macros.GNU b/include/makeinclude/macros.GNU deleted file mode 100644 index 17877c326bf..00000000000 --- a/include/makeinclude/macros.GNU +++ /dev/null @@ -1,22 +0,0 @@ -#---------------------------------------------------------------------------- -# $Id$ -# -# Local and nested target definitions -#---------------------------------------------------------------------------- - -TARGETS_LOCAL = \ - all.local \ - debug.local \ - profile.local \ - optimize.local \ - install.local \ - deinstall.local \ - clean.local \ - realclean.local \ - clobber.local \ - depend.local \ - rcs_info.local - -TARGETS_NESTED = \ - $(TARGETS_LOCAL:.local=.nested) - diff --git a/include/makeinclude/platform_aix.GNU b/include/makeinclude/platform_aix.GNU deleted file mode 100644 index 675b1af991b..00000000000 --- a/include/makeinclude/platform_aix.GNU +++ /dev/null @@ -1,3 +0,0 @@ -# $Id$ - -include $(ACE_ROOT)/include/makeinclude/platform_aix4_cset++.GNU diff --git a/include/makeinclude/platform_aix4.2.GNU b/include/makeinclude/platform_aix4.2.GNU deleted file mode 100644 index 395f30adbcb..00000000000 --- a/include/makeinclude/platform_aix4.2.GNU +++ /dev/null @@ -1,3 +0,0 @@ -# $Id$ - -include $(ACE_ROOT)/include/makeinclude/platform_aix4_cset++.GNU
\ No newline at end of file diff --git a/include/makeinclude/platform_aix4_cset++.GNU b/include/makeinclude/platform_aix4_cset++.GNU deleted file mode 100644 index 30ae0b98208..00000000000 --- a/include/makeinclude/platform_aix4_cset++.GNU +++ /dev/null @@ -1,76 +0,0 @@ -# $Id$ - -# AIX 4.x using the C Set++ compiler. -# *not* using Orbix -# -# On 4.1, this file assumes that the user has installed the AIX patch -# containing the dl*() APIs. To use these APIs, IBM has created a -# separate product (free to AIX licensees) called shared library -# hookable symbols (or slhs/6000). If they don't have this patch, the -# sv* commands for compiling and linking will not be present on the -# system. -# -# On 4.2, the AIX fileset bos.rte.bind_cmds must be at version 4.2.0.2 or -# higher in order to build libACEshr.a, and at 4.2.0.4 or higher for dl*() -# routines to work properly. Best to apply the update available at: -# ftp://service.boulder.ibm.com/aix/fixes/v4/os/bos.rte.bind_cmds.4.2.0.4.bff -# or a successor. - -debug = 1 - -# In case anything here or in the config depends on OS version number, -# grab it here and pass it all to the compiler as well. -AIX_MAJOR_VERS := $(shell uname -v) -AIX_MINOR_VERS := $(shell uname -r) - -CC = xlc_r -CXX = xlC_r - -# -qextchk is handy, but produces false type mismatches when linking -# netsvcs with 3.1.4, so it's disabled. IBM reports this fixed in 3.6.4. -CCFLAGS += $(CFLAGS) -qtempinc -qinfo -# AIX 4.3 and IBM C/C++ compilers 3.6.4 produce a bazillion warnings -# about 0-valued preprocessor defs. The problem may be a 3.6.4 compiler thing, -# but the only way I know of at this moment to turn the things off is to switch -# it based on the OS minor vers (assuming AIX 4.3 is used w/ xlC 3.6.4). -ifeq ($(AIX_MINOR_VERS),3) - CCFLAGS += -qflag=e:e -else - CCFLAGS += -qflag=w:w -endif -CPPFLAGS += -qlanglvl=ansi -DACE_AIX_MAJOR_VERS=$(AIX_MAJOR_VERS) -DACE_AIX_MINOR_VERS=$(AIX_MINOR_VERS) - -# -qinitauto seems useful, but when built with -qinitauto=5F, the -# Process_Strategy_Test went CPU bound in ostream, so I removed it (S. Huston) -DCFLAGS += -g -qcheck=nobounds:div:null - -DLD = makeC++SharedLib_r -LD = $(CXX) - -ifeq ($(shared_libs),1) -ACELIB = -lACEshr -SHLIBA = $(SHLIB:lib%.so=lib%shr.a) -endif - -ifeq ($(AIX_MINOR_VERS),1) -LLIBS = -lsvld -ltli_r $(ACELIB) -LIBS += $(filter-out $(SHLIBA:lib%.a=-l%), $(LLIBS)) -else -LIBS += -ltli_r -ldl -endif - -ARFLAGS = ruv -AR = ar -LDFLAGS += -bI:/lib/pse.exp -# Default OCCFLAGS builds common code for all RS/6000 architectures but -# this can be set to optimize for your particular computer. The commented -# out example optimizes for RS/6000 43P. -# OCCFLAGS is not used by default. To used it, set optimize=1 -# either in this file or on the command line. -#OCCFLAGS += -qarch=ppc -qtune=604 -OCCFLAGS += -qarch=com -RANLIB = ranlib -SOFLAGS = -p 0 -TEMPINCDIR = tempinc -TMPL_OBJS := $(TEMPINCDIR)/*.o -SOBUILD = diff --git a/include/makeinclude/platform_aix4_g++.GNU b/include/makeinclude/platform_aix4_g++.GNU deleted file mode 100644 index 69793ceb341..00000000000 --- a/include/makeinclude/platform_aix4_g++.GNU +++ /dev/null @@ -1,48 +0,0 @@ -# $Id$ -# -# Platform macros for building on AIX 4.x with g++. This has been tested on -# AIX 4.3 with egcs 1.1.2. -# -# Original contributed by Ian Wright <I.Wright@elsevier.co.uk>. Updated for -# AIX 4 and egcs by Steve Huston <shuston@riverace.com>. - -debug = 1 -optimize = 0 -threads = 1 - -# In case anything here or in the config depends on OS version number, -# grab it here and pass it all to the compiler as well. -AIX_MAJOR_VERS := $(shell uname -v) -AIX_MINOR_VERS := $(shell uname -r) - -CC = gcc -CXX = g++ -CFLAGS += -W -Wall -pipe -mcpu=common -DACE_AIX_MAJOR_VERS=$(AIX_MAJOR_VERS) -DACE_AIX_MINOR_VERS=$(AIX_MINOR_VERS) -ifeq ($(threads),1) -CFLAGS += -mthreads -endif -CCFLAGS += $(CFLAGS) -fno-implicit-templates -DCFLAGS += -g -DLD = $(CXX) -LD = $(CXX) -LDFLAGS += -Wl,-bI:/lib/pse.exp -OCFLAGS = -O2 -OCCFLAGS = $(OCFLAGS) -ifeq ($(threads),1) -SOFLAGS += -mthreads -endif -SOFLAGS += -shared -Wl,-bexpall # -Wl,-bloadmap:lib.map -LIBS += -ltli_r -ldl -ARFLAGS = cruv -RANLIB = ranlib - -# On AIX, shared libraries are not generally left in .so form to link against. -# To do so requires the run-time linker and that is an unnecessary evil. -# So build the .so as usual, but then put in an archive library to link -# against. The archive lib is the one installed for run-time use also, though -# if you want to use ACE's dynamic loading features, you'll also need the -# .so file. -ifeq ($(shared_libs),1) -ACELIB = -lACEshr -SHLIBA = $(SHLIB:lib%.so=lib%shr.a) -endif diff --git a/include/makeinclude/platform_aix_g++.GNU b/include/makeinclude/platform_aix_g++.GNU deleted file mode 100644 index e3762f17957..00000000000 --- a/include/makeinclude/platform_aix_g++.GNU +++ /dev/null @@ -1,31 +0,0 @@ -# $Id$ -# -# Platform macros for building on AIX with g++. This has been tested on -# AIX 4.1.4 and gcc 2.7.2.3. -# -# A note - later versions of gcc(>2.7.2.3, I don't know which) have a -mthreads -# flag which does the same job more elegantly. -# I haven't managed to get the shared library to work. -# I know having tli_r and tli is a bad idea, but it won't link otherwise. -# -# Contributed by Ian Wright <I.Wright@elsevier.co.uk> - -debug = 1 -static_libs_only = 1 - -CC = gcc -CXX = gcc -CFLAGS += -W -Wall -nostdlib -mcpu=common -CCFLAGS += $(CFLAGS) -fno-implicit-templates -#only needed for one of the tests and causes compiler errors in building libACE -#CCFLAGS += -fhandle-exceptions -DCFLAGS += -g -DLD = $(CXX) -LD = $(CXX) -OCFLAGS = -O2 -OCCFLAGS = $(OCFLAGS) -LIBS += /lib/crt0_r.o -L/usr/lib/threads -lsvld -lC_r -lpthreads --lc_r -ltli_r -lg++ -lstdc++ -lm -lg -ltli -lgcc -PIC = -fPIC -ARFLAGS = cruv -RANLIB = ranlib diff --git a/include/makeinclude/platform_chorus.GNU b/include/makeinclude/platform_chorus.GNU deleted file mode 100644 index d0c2a428fa2..00000000000 --- a/include/makeinclude/platform_chorus.GNU +++ /dev/null @@ -1,75 +0,0 @@ -# $Id$ - -# Chorus 3.1b with GNU g++ 2.7.2 - -CHORUS = 1 -CROSS-COMPILE = 1 - -debug = 1 -exceptions = -optimize = 1 -shared_libs = -static_libs = 1 - -# -# The following file includes definitions such as $(CC), $(XDIR), etc. -# -include $(MERGEDIR)/dtool/htgt-cf.rf -CLASSIXDIR=$(MERGEDIR) -# -# Tool PATH -# -TOOLDIR = $(XDIR)/bin/ -INC_DIR = $(CLASSIXDIR)/include -BIN_DIR = -LIB_DIR = $(CLASSIXDIR)/lib -#CC = gcc -#CXX = g++ -CXX = $(CC) -CFLAGS += -w -CCFLAGS += $(CFLAGS) -fno-implicit-templates \ - -fno-strict-prototypes \ - -Usun \ - -fno-builtin \ - -fconserve-space \ - -fcheck-new \ - -nostdinc \ - -pipe \ - -fno-rtti \ - -D_POSIX_THREADS \ - -D_POSIX_THREAD_SAFE_FUNCTIONS - -#DCFLAGS += -gstabs+ -INCLDIRS += -I$(INC_DIR)/posix \ - -I$(INC_DIR)/stdc \ - -I$(INC_DIR)/chorus/ \ - -I$(INC_DIR)/chorus/iom \ - -I$(INC_DIR)/CC -DLD = -LD = $(XDIR)/bin/ld -LDFLAGS += -r $(CLASSIXDIR)/lib/CC/libC.a $(CLASSIXDIR)/lib/classix/libcx.u.a -MATHLIB = -L$(CLASSIXDIR)/lib/libm -lm - -LINK.cc.override = $(LD) -u _main -u _premain -LINK.cc=override - -CHORUSLINK=true - -# $(CLASSIXDIR)/dtool/mkctors helloCxx_u.xp.o > helloCxx_u.ct.s -# $(CXX) -c helloCxx_u.ct.s -# $(RM) helloCxx_u.ct.s -# $(LD) $(LDOPTIONS) -e _start -o helloCxx_u \ -# $(CLASSIXDIR)/lib/crt/crth.u.o $(CLASSIXDIR)/lib/crt/crt0.o $(CLASSIXDIR)/lib/crt/crti.o helloCxx_u.xp.o helloCxx_u.ct.o $(CLASSIXDIR)/lib/crt/crtn.o \ -# -dn -T $(CLASSIXDIR)/src/act/slots/act_u.ld -# $(RM) helloCxx_u.xp.o -# $(RM) helloCxx_u.ct.o - - -OCFLAGS += -O -PIC = -fPIC - -AR = $(TOOLDIR)ar -ARFLAGS = srv - -RANLIB = $(TOOLDIR)ranlib -PRELIB = @true diff --git a/include/makeinclude/platform_chorus_ghs.GNU b/include/makeinclude/platform_chorus_ghs.GNU deleted file mode 100644 index 44651bee879..00000000000 --- a/include/makeinclude/platform_chorus_ghs.GNU +++ /dev/null @@ -1,77 +0,0 @@ -# $Id$ -# -# Chorus with Green Hills - -# Locations of Green Hills installation, MVME installation, etc. The -# ifndef protection allows setting via environment variables. -ifndef GHS_DIR - GHS_DIR=/project/doc/mvme/green68k/GreenHills/releases/chorus-m68k -endif # GHS_DIR - -ifndef COOL_DIR - COOL_DIR=/project/doc/mvme/miniCOOL/minicool.r4.3/classix-r3-flm-mvme177-gh -endif # COOL_DIR - -ifndef MVME_DIR - MVME_DIR=/project/doc/mvme/mvme177 -endif # MVME_DIR - -ifndef MVME_INCL - MVME_INCL = $(MVME_DIR)/include -endif # MVME_INCL - -ifndef MVME_LIB - MVME_LIB = $(MVME_DIR)/lib -endif # MVME_LIB - -CHORUS = 1 -CROSS-COMPILE = 1 - -debug = 1 -ifndef exceptions - exceptions = -endif # exceptions -optimize = 1 -shared_libs = -static_libs = 1 - -PATH +=:$(GHS_DIR) - -CC = cxch68 -CXX = $(CC) -CFLAGS = -groot=$(MVME_DIR)/ -alttools=$(GHS_DIR)/gnuch68 -68040 -fprecise \ - -I$(MVME_INCL)/posix \ - -I$(MVME_INCL)/stdc \ - -I$(MVME_INCL)/chorus \ - -I$(MVME_INCL)/CC -CCFLAGS += $(CFLAGS) --mkctors --multibyte_chars --no_rtti --wchar_t_keyword \ - -tnone -DCFLAGS += -g -G -DLD = $(CXX) -LD = $(CXX) -LDFLAGS = --no_auto_instantiation -u __main -u __premain -u _abort -r \ - $(COOL_DIR)/lib/libOrb.a \ - $(MVME_DIR)/lib/CC/libC.a \ - $(MVME_DIR)/lib/classix/libcx.s.a -OCFLAGS += -OL -OM -AR = $(GHS_DIR)/gnuch68/ar -ARFLAGS = rv -RANLIB = @true - -ifeq ($(debug),) - CRTH = $(MVME_DIR)/lib/crt/crth.s.o -else - CRTH = $(MVME_DIR)/lib/crt/crth_d.s.o -endif # debug - -ifdef exceptions - CCFLAGS += --exceptions -endif # exceptions - -POSTLINK = ; $(CC) -groot=$(MVME_DIR)/ -alttools=$(GHS_DIR)/gnuch68 -68040 \ - -nostartfiles -nostdlib -e __start -o $@.final \ - $(CRTH) $(MVME_DIR)/lib/crt/crt0.o \ - $(MVME_DIR)/lib/crt/crti.o $@ \ - $(MVME_DIR)/lib/crt/crtn.o \ - -locatedprogram -r; \ - mv -f $@.final $@; chmod +x $@; $(RM) /tmp/gh_*.[os] diff --git a/include/makeinclude/platform_cray.GNU b/include/makeinclude/platform_cray.GNU deleted file mode 100644 index 026ded4ba07..00000000000 --- a/include/makeinclude/platform_cray.GNU +++ /dev/null @@ -1,49 +0,0 @@ -# $Id$ - -# Initial platform macros for SGI/Cray UNICOS (vector) & UNICOS/mk (mpp) - -# UNICOS 10.0.0.2 -# UNICOS/mk 2.0.3.10 -# Cray C++ Version 3.1.0.0 -# Cray Standard C Version 6.1.0.0 -# -# Contributed by Doug Anderson <doug@clark.net> - -debug = 1 -exceptions = 1 -static_libs_only = 1 -quantify = -purify = - -# Cray's autoinstantiation seems to be broken, resulting in -# C++ prelinker: error: instantiation loop -# So, we're using ACE_HAS_EXPLICIT_TEMPLATE_INSTANTIATION -CC = cc -LDLIB += -L$(ACE_ROOT)/ace -CXX = CC -#CFLAGS += -CCFLAGS += -h noautoinstantiate -DCFLAGS += -g -DCCFLAGS += $(DCFLAGS) -OCFLAGS += -O2 -OCCFLAGS += $(OCFLAGS) - -ifndef exceptions - CCFLAGS += -h noexceptions -else - CCFLAGS += -h exceptions -endif # ! exceptions - -DLD = $(CXX) -LD = $(CXX) -LIBS = -lpthread -PIC = -AR = ar -ARFLAGS = ruv -RANLIB = /bin/true - -# This is necessary to get libraries to contain template info, but only -# necessary when using autoinstantiation -# PRELIB = @echo ""; \ -# echo "int main() { return 0; }" >dummy.cpp; \ -# echo "$(CXX) $(CCFLAGS) $(CPPFLAGS) $(LDFLAGS) $(LIBS) -o dummy dummy.cpp $?";\ -# $(CXX) $(CCFLAGS) $(CPPFLAGS) $(LDFLAGS) $(LIBS) -o dummy dummy.cpp $?; diff --git a/include/makeinclude/platform_dgux4_epc.GNU b/include/makeinclude/platform_dgux4_epc.GNU deleted file mode 100644 index 7af2281d13a..00000000000 --- a/include/makeinclude/platform_dgux4_epc.GNU +++ /dev/null @@ -1,23 +0,0 @@ -# $Id$ - -# SunOS 5.x (Solaris 2.x) with SunC++ 4.x -# *not* using Orbix - -debug = 1 - -CC = gcc -CXX = ec++ -## CCFLAGS += -relax -tproff -CCFLAGS += $(CFLAGS) -relax -v -eh -DCFLAGS += -g -DLD = $(CXX) -LIBS += -lgen -lsocket -ldl -lnsl -lc -PIC = -KPIC -AR = ar -ARFLAGS = -ruv -RANLIB = echo -SOFLAGS = -G $(CPPFLAGS) -#SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.o $<; \ -# $(SOLINK.cc) -o $@ -h $@ $(LDFLAGS) $(VSHDIR)$*.o -SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.o $<; \ - $(SOLINK.cc) -o $@ $(LDFLAGS) $(VSHDIR)$*.o diff --git a/include/makeinclude/platform_dgux4_ghs.GNU b/include/makeinclude/platform_dgux4_ghs.GNU deleted file mode 100644 index 05c5b3ad787..00000000000 --- a/include/makeinclude/platform_dgux4_ghs.GNU +++ /dev/null @@ -1,27 +0,0 @@ -# $Id$ - -# DG/UX 4.x using Green Hills Multi's C++ compiler. - -debug = 1 -#shared_libs_only = 0 -#static_libs_only = 1 -#static_libs = 1 - -CC = cc -CXX = ghcx -CCFLAGS += $(CFLAGS) -elf -template=noauto # -ansicxx -# There was a link-time failure if -g (debugging) was turned on, and Green -# Hills was not able to try to fix it, so debugging is via ACE_OS::printf :-( -DCFLAGS += # -g -DLD = $(CXX) -shared -LD = $(CXX) -LIBS += -lthread -lrte -lgen -lsocket -ldl -lnsl # -lc -PIC = -pic -AR = $(CXX) -archive -o -ARFLAGS = -RANLIB = echo -#SOFLAGS = -G $(CPPFLAGS) -#SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.o $<; \ -# $(SOLINK.cc) -o $@ -h $@ $(LDFLAGS) $(VSHDIR)$*.o -#SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.o $<; \ -# $(SOLINK.cc) -o $@ $(LDFLAGS) $(VSHDIR)$*.o diff --git a/include/makeinclude/platform_freebsd.GNU b/include/makeinclude/platform_freebsd.GNU deleted file mode 100644 index c1bfbd40fad..00000000000 --- a/include/makeinclude/platform_freebsd.GNU +++ /dev/null @@ -1,33 +0,0 @@ -# $Id$ - -# platform_freebsd.GNU - -VERSION := $(shell uname -r | sed -e "s/`uname -r | sed -e 's/.//'`//") -ifneq ($(VERSION),3) -versioned_so = 1 -endif - -optimize = 1 - -debug = 1 - -CC = gcc -CXX = g++ -CFLAGS += -W -Wall -Wpointer-arith -pipe -CCFLAGS += $(CFLAGS) -fno-implicit-templates -DCFLAGS += -g -ifeq ($(VERSION),3) - LDFLAGS += -Wl,-rpath $(ACE_ROOT)/ace -endif -DLD = $(CXX) -LD = $(CXX) -LIBS += -lstdc++ -OCFLAGS += -O2 -PIC = -fpic -AR = ar -ARFLAGS = ruv -RANLIB = ranlib - -SOFLAGS = $(CPPFLAGS) -shared -SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.so $< -PRELIB = @echo diff --git a/include/makeinclude/platform_freebsd_pthread.GNU b/include/makeinclude/platform_freebsd_pthread.GNU deleted file mode 100644 index a6cfdd13203..00000000000 --- a/include/makeinclude/platform_freebsd_pthread.GNU +++ /dev/null @@ -1,8 +0,0 @@ -# $Id$ - -# platform_freebsd_pthread.GNU - -include $(ACE_ROOT)/include/makeinclude/platform_freebsd.GNU - -LDFLAGS += -pthread -CFLAGS += -D_THREAD_SAFE diff --git a/include/makeinclude/platform_hpux.GNU b/include/makeinclude/platform_hpux.GNU deleted file mode 100644 index 2388aaf5be9..00000000000 --- a/include/makeinclude/platform_hpux.GNU +++ /dev/null @@ -1,28 +0,0 @@ -# $Id$ - -debug = 1 - -# First, extract the OS version number. -HPVERS_WORDS := $(subst ., ,$(shell uname -r)) -HPUX_VERS := $(join $(word 2,$(HPVERS_WORDS)),$(word 3,$(HPVERS_WORDS))) -# - -CC = /bin/cc -CXX = /usr/bin/CC -pta -ti,/bin/true -tr,/bin/true -CFLAGS = -Aa -z +a1 -CCFLAGS = $(CFLAGS) -D_REENTRANT -DACE_LACKS_PRAGMA_ONCE -DHPUX_VERS=$(HPUX_VERS) -DCFLAGS += -g -DLD = /usr/bin/CC -LD = /usr/bin/CC -PIC = +Z -ARFLAGS = ruv -RANLIB = echo -LDFLAGS = -L$(ACE_ROOT)/ace -Wl,+s -LIBS += -lxti -SOFLAGS = -b -SOEXT = sl -SOBUILD = @echo ""; \ - echo "$(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.o $<"; \ - $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.o $<; \ - echo "$(SOLINK.cc) -o $@ $(VSHDIR)$*.o"; \ - $(SOLINK.cc) -o $@ $(VSHDIR)$*.o diff --git a/include/makeinclude/platform_hpux_aCC.GNU b/include/makeinclude/platform_hpux_aCC.GNU deleted file mode 100644 index 609a00183b7..00000000000 --- a/include/makeinclude/platform_hpux_aCC.GNU +++ /dev/null @@ -1,114 +0,0 @@ -# $Id$ -# -# This is for the HP-UX 10.x and 11.x using the aC++ compiler. -# -# For 10.x, most of the difference for threaded vs. non-threaded is -# contained in ace/config-hpux-10.x.h. However, to build without threads, -# you should run the make with "threads=0" since the default is to build -# with threads. -# -# HP-UX 11 supports both 32-bit and 64-bit builds, regardless of which -# architecture the build is done on. This file is set up to build native -# to the machine it's running on. To cross-build for another platform, add -# "buildbits=32" to make a 32-bit build, and "buildbits=64" to do a 64-bit -# build. Note that if you explicitly specify a 64-bit build, the option -# -Wl,+vnocompatwarnings is added to shut up the "At least one PA 2.0 object -# file detected..." messages. - -buildbits = 0 -debug = 1 -distrib = 0 -threads = 1 - -# First, extract the OS version number. -HPVERS_WORDS := $(subst ., ,$(shell uname -r)) -HPUX_VERS := $(join $(word 2,$(HPVERS_WORDS)),$(word 3,$(HPVERS_WORDS))) -# -CC = /bin/cc -CXX = /opt/aCC/bin/aCC -# CPP_LOCATION is for TAO builds - says where the C preprocessor is -CPP_LOCATION = /usr/ccs/lbin/cpp -# -# Set the appropriate preprocessor defs for threading based on OS version. -# If the user has requested building without threads, then don't set any. -# -ifeq ($(threads),1) -ifeq ($(word 2,$(HPVERS_WORDS)), 11) -THR_DEFS = -DACE_HAS_THREADS -D_POSIX_C_SOURCE=199506L -else -THR_DEFS = -DACE_HAS_THREADS -D_REENTRANT -endif -endif -# -# Suppress warning 829 (string literal to char * is deprecated) -# Suppress warning 302 ((...) parameter list is a non-portable feature) -CCFLAGS += $(CFLAGS) $(THR_DEFS) -DHPUX_VERS=$(HPUX_VERS) -DACE_LACKS_PRAGMA_ONCE +W829,302 -# Additionally, on HP-UX 10.20, suppress 495 to shut up the warnings from -# the system header files. 667 is also suppressed, but the compiler still -# tells you there was a future error, but at least you can pick out any real -# errors by quickly scanning the output. -ifeq ($(word 2,$(HPVERS_WORDS)), 10) -CCFLAGS += +W495,667 -endif -DCFLAGS += -g -DLD = $(CXX) $(CCFLAGS) -LD = $(CXX) -OCCFLAGS = -O -PIC = +Z - -AR = $(COMPILE.cc) +inst_close $^; /bin/ar -ARFLAGS = ruv -RANLIB = echo -LDFLAGS = -Wl,+s -z -SOFLAGS = -b - -ifeq ($(distrib),1) - -ifeq ($(word 2,$(HPVERS_WORDS)), 10) -SOFLAGS += -Wl,-x -Wl,+h/usr/lib/$(@F) -else -ifeq ($(buildbits),32) -SOFLAGS += -Wl,-x -Wl,+h/usr/lib/$(@F) -endif -ifeq ($(buildbits),64) -SOFLAGS += -Wl,-x -Wl,+h/usr/lib/pa20_64/$(@F) -endif -endif - -endif - -SOEXT = sl - -ifeq ($(buildbits),32) -CCFLAGS += +DA1.1 +DS1.1 -else -ifeq ($(buildbits),64) -CCFLAGS += +DA2.0 +DS2.0 -LDFLAGS += -Wl,+vnocompatwarnings -else -CCFLAGS += +DAportable -endif -endif - -# -# Grab the appropriate libraries based on the version of HP-UX we're building -# on and whether or not thread support is being used. -# -ifeq ($(word 2,$(HPVERS_WORDS)), 11) - -#11.x: -ifeq ($(threads),1) -LIBS += -lxti -lpthread -lrt -ldld -else -LIBS += -lxti -lrt -ldld -endif - -else - -# 10.x: -LIBS += -lxti -ldld -ifeq ($(threads),1) -LIBS += -lcma -endif - -endif diff --git a/include/makeinclude/platform_hpux_gcc.GNU b/include/makeinclude/platform_hpux_gcc.GNU deleted file mode 100644 index 14f0c8f941b..00000000000 --- a/include/makeinclude/platform_hpux_gcc.GNU +++ /dev/null @@ -1,62 +0,0 @@ -# $Id$ -# - -debug = 1 -optimize = 1 -threads = 1 - -# First, extract the OS version number. -HPVERS_WORDS := $(subst ., ,$(shell uname -r)) -HPUX_VERS := $(join $(word 2,$(HPVERS_WORDS)),$(word 3,$(HPVERS_WORDS))) -# -CC = gcc -CXX = g++ -CFLAGS += -w -# -# Set the appropriate preprocessor defs for threading based on OS version. -# If the user has requested building without threads, then don't set any. -# -ifeq ($(threads),1) -ifeq ($(word 2,$(HPVERS_WORDS)), 11) -THR_DEFS = -DACE_HAS_THREADS -D_POSIX_C_SOURCE=199506L -else -THR_DEFS = -DACE_HAS_THREADS -D_REENTRANT -endif -endif - -CCFLAGS += $(CFLAGS) -fno-implicit-templates -DHPUX_VERS=$(HPUX_VERS) $(THR_DEFS) -DCFLAGS += -g -DLD = $(CXX) -LD = $(CXX) -OCFLAGS += -O2 -PIC = -fPIC -ARFLAGS = ruv -RANLIB = echo -LDFLAGS = -L. -L$(ACE_ROOT)/ace -Wl,+s -SOFLAGS = $(CPPFLAGS) -shared -nostdlib $(PIC) -SOEXT = sl -SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.$(SOEXT) $< -SHLIBBUILD = $(SOLINK.cc) -o $@ $(VSHOBJS1) -PRELIB = @true -# -# Grab the appropriate libraries based on the version of HP-UX we're building -# on and whether or not thread support is being used. -# -ifeq ($(word 2,$(HPVERS_WORDS)), 11) - -#11.x: -ifeq ($(threads),1) -LIBS += -lxti -lpthread -lrt -ldld -else -LIBS += -lxti -lrt -ldld -endif - -else - -# 10.x: -LIBS += -lxti -ldld -ifeq ($(threads),1) -LIBS += -lcma -endif - -endif diff --git a/include/makeinclude/platform_hpux_orbix.GNU b/include/makeinclude/platform_hpux_orbix.GNU deleted file mode 100644 index fa05720bf14..00000000000 --- a/include/makeinclude/platform_hpux_orbix.GNU +++ /dev/null @@ -1,30 +0,0 @@ -# $Id$ - -# Assume the existence of Orbix with HP/UX... - -debug = 1 - -CC = /bin/cc -CXX = /usr/bin/CC -CFLAGS = -Aa -z +z -CCFLAGS = $(CFLAGS) -pta -ptb -DCFLAGS += -g -DLD = $(CXX) -LD = $(CXX) -INCLDIRS = -I$(ORBIX_ROOT)/include -PIC = -ARFLAGS = ruv -RANLIB = echo -LDFLAGS = -L$(ORBIX_ROOT)/lib -L$(ACE_ROOT)/ace -Wl,+s -SOFLAGS = -b -SOBUILD = @echo ""; \ - echo "$(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.o $<"; \ - $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.o $<; \ - $(RM) -rf $(VSHDIR)pt$*; mkdir $(VSHDIR)pt$*; \ - echo "int main() { return 0; }" >dummy.C; \ - echo "$(CXX) $(CCFLAGS) $(PIC) $(CPPFLAGS) $(LDFLAGS) -ptr$(VSHDIR)pt$* -ptr./ptrepository dummy.C $<";\ - YYZ="`$(CXX) $(CCFLAGS) $(PIC) $(CPPFLAGS) $(LDFLAGS) -ptr$(VSHDIR)pt$* -ptr./ptrepository dummy.C $<`"; \ - $(RM) -rf a.out dummy.*; \ - YYZ="`echo $(VSHDIR)pt$*/*.o`"; \ - echo "$(SOLINK.cc) -o $@ ./$(VSHDIR)$*.o $(YYZ)"; \ - $(SOLINK.cc) -o $@ ./$(VSHDIR)$*.o $(YYZ) diff --git a/include/makeinclude/platform_irix5.2.GNU b/include/makeinclude/platform_irix5.2.GNU deleted file mode 100644 index 57a80d16440..00000000000 --- a/include/makeinclude/platform_irix5.2.GNU +++ /dev/null @@ -1,21 +0,0 @@ -# $Id$ - -# Irix 5.2 with gcc 2.6.1 - -debug = 1 -optimize = 1 - -MAKE = gmake -CC = gcc -CXX = g++ -CCFLAGS += $(CFLAGS) -fno-implicit-templates -DCFLAGS += -g -DLD = $(CXX) -LD = $(CXX) -LDFLAGS += -LIBS += -ldl -OCFLAGS += -O2 -PIC = -fpic -RANLIB = echo -SOFLAGS = -SOBUILD = diff --git a/include/makeinclude/platform_irix5.3_g++.GNU b/include/makeinclude/platform_irix5.3_g++.GNU deleted file mode 100644 index 2353ab4170d..00000000000 --- a/include/makeinclude/platform_irix5.3_g++.GNU +++ /dev/null @@ -1,21 +0,0 @@ -# $Id$ - -# Irix 5.3 with GNU C++ - -debug = 1 -optimize = 1 - -CC = gcc -CXX = g++ -CCFLAGS += $(CFLAGS) -fno-implicit-templates -DCFLAGS += -g -DLD = $(CXX) -LD = $(CXX) -LDFLAGS += -L$(ACE_ROOT)/ace -OCFLAGS += -O2 -PIC = -fpic -RANLIB = echo -SOFLAGS = -shared $(CPPFLAGS) -SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.o $<; \ - $(SOLINK.cc) -o $@ $(LDFLAGS) $(VSHDIR)$*.o - diff --git a/include/makeinclude/platform_irix5.3_sgic++.GNU b/include/makeinclude/platform_irix5.3_sgic++.GNU deleted file mode 100644 index 41b1e831b3e..00000000000 --- a/include/makeinclude/platform_irix5.3_sgic++.GNU +++ /dev/null @@ -1,26 +0,0 @@ -# $Id$ - -# Irix 5.3 with SGI C++ - -# This suppresses common compiler warnings which appear in the -# ACE code but should not matter. The warnings can be turned on -# again by removing the -woff clause in the CPPFLAGS definition. - -debug = 1 - -CC = cc -CXX = CC -CCFLAGS += $(CFLAGS) -DCFLAGS += -g -DLD = $(CXX) -LD = $(CXX) -CPPFLAGS += -ptused -prelink +pp -woff 3203,3209,3161,3262,3665 -LDFLAGS += -rpath "$(ACE_ROOT)/ace" -LIBS = -PIC = -KPIC -AR = ar -ARFLAGS = r -RANLIB = echo -SOFLAGS = -shared $(CPPFLAGS) -all -SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.o $<; \ - $(SOLINK.cc) -o $@ $(LDFLAGS) $(VSHDIR)$*.o diff --git a/include/makeinclude/platform_irix6.x_common.GNU b/include/makeinclude/platform_irix6.x_common.GNU deleted file mode 100644 index b27ff8331bb..00000000000 --- a/include/makeinclude/platform_irix6.x_common.GNU +++ /dev/null @@ -1,13 +0,0 @@ -# $Id$ - -xt_reactor = 1 - -PLATFORM_XT_CPPFLAGS= -PLATFORM_XT_LIBS=-lXm -lXt -lX11 -PLATFORM_XT_LDFLAGS= - -ifndef ACE_IRIX_VERS -ACE_IRIX_VERS := $(subst .,,$(shell uname -r)) -endif # ACE_IRIX_VERS - -CPPFLAGS += -DACE_IRIX_VERS=$(ACE_IRIX_VERS) diff --git a/include/makeinclude/platform_irix6.x_g++.GNU b/include/makeinclude/platform_irix6.x_g++.GNU deleted file mode 100644 index 0541ebf6ad2..00000000000 --- a/include/makeinclude/platform_irix6.x_g++.GNU +++ /dev/null @@ -1,30 +0,0 @@ -# $Id$ - -# Irix 6.X with GNU C++ - -include $(ACE_ROOT)/include/makeinclude/platform_irix6.x_common.GNU - -ifeq (,$(debug)) - debug = 1 -endif -ifeq (,$(optimize)) - optimize = 1 -endif - -CC = gcc -CXX = g++ -CFLAGS += $(DCFLAGS) -CCFLAGS += $(CFLAGS) -fno-implicit-templates -DCFLAGS += -g -DLD = $(CXX) -LD = $(CXX) -LDFLAGS += -L$(ACE_ROOT)/ace -Wl,-dont_warn_unused -LIBS += -lpthread -OCFLAGS += -O2 -PIC = -fpic -# AR = ar -ARFLAGS = rv -RANLIB = @true -SOFLAGS = -shared $(CPPFLAGS) -SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.o $<; \ - $(SOLINK.cc) $(LDFLAGS) -o $@ $(VSHDIR)$*.o diff --git a/include/makeinclude/platform_irix6.x_kcc.GNU b/include/makeinclude/platform_irix6.x_kcc.GNU deleted file mode 100644 index 3d5311feea3..00000000000 --- a/include/makeinclude/platform_irix6.x_kcc.GNU +++ /dev/null @@ -1,35 +0,0 @@ -# $Id$ - -# Irix 6.x with KCC 3.3f - -include $(ACE_ROOT)/include/makeinclude/platform_irix6.x_common.GNU - -# WARNING_FLAGS += -# 111: statement is unreachable. There's a whole bunch of these -# in the ace code. -WARNING_FLAGS += --diag_suppress 111 - -debug = 1 -optimize = 1 - -CC = KCC -CXX = KCC -CFLAGS += -32 -CCFLAGS += $(CFLAGS) -DNULL=0 $(WARNING_FLAGS) -ifeq ($(optimize),1) -DCFLAGS += -g --backend -g3 -else -DCFLAGS += +K0 -g -endif -DLD = $(CXX) -LD = $(CXX) -LDFLAGS += -32 -L$(ACE_ROOT)/ace -L. -LIBS += -lpthread -OCFLAGS += +K3 -O2 -PIC = -AR = KCC -ARFLAGS = -o -RANLIB = @true -SOFLAGS = $(CPPFLAGS) -L$(ACE_ROOT)/ace $(ACELIB) -SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.so $< -PRELIB = @true diff --git a/include/makeinclude/platform_irix6.x_sgic++.GNU b/include/makeinclude/platform_irix6.x_sgic++.GNU deleted file mode 100644 index d3edb63bdf7..00000000000 --- a/include/makeinclude/platform_irix6.x_sgic++.GNU +++ /dev/null @@ -1,64 +0,0 @@ -# $Id$ - -# Irix 6.[234] with SGI C++ -# In order to get the -n32 flag enabled please set the SGI_ABI -# environment variable to -n32. This causes a new compiler to be -# invoked. - -ifeq (,$(debug)) - debug = 1 -endif -ifeq (,$(optimize)) - optimize = 1 -endif - -include $(ACE_ROOT)/include/makeinclude/platform_irix6.x_common.GNU - -# Instead of setting the ABI here we rely on the the macro SGI_ABI. -CC = cc -CXX = CC -DLD = $(CXX) -LD = $(CXX) - -# Basic flags - -# In Irix 6.2 w/o the thread patches this macro should have no effect. -CPPFLAGS += -D_SGI_MP_SOURCE -OCCFLAGS += -O -DCCFLAGS += -g - -# Enable exceptions even in the o32 bit ABI. -CCFLAGS += -exceptions - -# Instantiate no templates automatically, do not run prelinker. There -# are other choices available, but those have not been used in a while. -CCFLAGS += -ptnone -no_prelink -# Instantiate everything; without this, apps/Gateway/Gateway/gatewayd might -# not build due to missing template instantiations. NOTE: it seems -# this setting no longer works for ACE. -#CCFLAGS += -ptall -# Instantiate used templates, plus prelinking instantiation -#CCFLAGS += -ptused -prelink -# Instantiate used templates, but do not run prelinker -#CCFLAGS += -ptused - -LDFLAGS += -rpath "$(ACE_ROOT)/ace" -LDFLAGS += -Wl,-woff,15 -LDFLAGS += -Wl,-woff,84 -LDFLAGS += -Wl,-woff,85 -LDFLAGS += -Wl,-woff,133 - -# You need to remove this if you are using 6.2 without the Pthread -# patches or if you want to compile without threads support. -LIBS += -lpthread - -PIC = -KPIC -AR = ar -ARFLAGS = r -RANLIB = echo -SOFLAGS = -shared $(CCFLAGS) $(CPPFLAGS) -all -multigot -SOBUILD = $(RM) $@; $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.o $< && \ - /bin/ln $(VSHDIR)$*.o $@ - -# The math library -MATHLIB=-lm diff --git a/include/makeinclude/platform_linux.GNU b/include/makeinclude/platform_linux.GNU deleted file mode 100644 index 5c59e55f48e..00000000000 --- a/include/makeinclude/platform_linux.GNU +++ /dev/null @@ -1,36 +0,0 @@ -# $Id$ - -# According to Bryon G. Rigg <bgrigg@opus.bcbnet.com>, this file -# should allow ACE to be built on Linux. - -debug = 1 -optimize = 1 - -CC = gcc -CXX = g++ -CFLAGS += -W -Wall -Wpointer-arith -pipe -CCFLAGS += $(CFLAGS) -fno-implicit-templates -DCFLAGS += -g -DLD = $(CXX) -LD = $(CXX) -LIBS += -ldl -OCFLAGS += -O3 -PIC = -fPIC -AR = ar -ARFLAGS = rsuv -RANLIB = @true -SOFLAGS = $(CPPFLAGS) -shared -SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.so $< -PRELIB = @true - -#### GNU gas has a string limit of 4096 characters. On Alphas, -#### builds will fail due to running over that limit. There are -#### at least two workarounds: -#### 1) Change the limit to 8192 characters and rebuild gas. See -#### ACE-INSTALL.html for more information. -#### 2) Don't use -g when compiling those files. -#### If you're building on an Alpha and you haven't hacked and -#### rebuilt gas, you might need to uncomment the following. -#### ifeq ($(debug),1) -#### SUPPRESS_DASH_G = 1 -#### endif # debug diff --git a/include/makeinclude/platform_linux_kcc.GNU b/include/makeinclude/platform_linux_kcc.GNU deleted file mode 100644 index 0b9c912e3b9..00000000000 --- a/include/makeinclude/platform_linux_kcc.GNU +++ /dev/null @@ -1,39 +0,0 @@ -# $Id$ - -# According to Ben Eng <ben@jetpen.com>, this file -# should allow ACE to be built on Linux using KAI C++ 3.3a. -# -# NOTE: evaluation copies of KCC might include libraries that -# were compiled with exception handling enabled. To enable link -# compatibility with those libraries, you must build ACE with -# exception handling enabled, as well. To do that, either set -# the exceptions macro below to 1, or build with: -# make exceptions=1 - -debug = 0 -exceptions = -optimize = 1 - -CC = /opt/KCC/KCC_BASE/bin/KCC -CXX = $(CC) -CFLAGS += -D_POSIX_THREADS -D_POSIX_THREAD_SAFE_FUNCTIONS -D_REENTRANT \ - -D_GNU_SOURCE -CCFLAGS += $(CFLAGS) -DNULL=0 -DCFLAGS += +K0 -g -DLD = $(CC) -LD = $(CC) -LIBS += -ldl -lpthread -lm - -ifndef exceptions - EXCEPTION = --no_exceptions -endif # ! exceptions - -OCFLAGS += +K3 -O --one_instantiation_per_object $(EXCEPTION) -PIC = -fPIC -AR = $(CC) -ARFLAGS = $(EXCEPTION) -o -RANLIB = @true -SOFLAGS = $(CPPFLAGS) $(EXCEPTION) -SOBUILD = $(COMPILE.cc) $(PIC) $(EXCEPTION) -o $(VSHDIR)$*.o $< -PRELIB = @true -PRELIB_USES_OBJ_ONLY = 1 diff --git a/include/makeinclude/platform_linux_lxpthread.GNU b/include/makeinclude/platform_linux_lxpthread.GNU deleted file mode 100644 index 553b1ecc0cf..00000000000 --- a/include/makeinclude/platform_linux_lxpthread.GNU +++ /dev/null @@ -1,84 +0,0 @@ -# $Id$ - -# For pthreads support on Linux, you need -# -D_POSIX_THREADS -# -D_POSIX_THREAD_SAFE_FUNCTIONS -# in the CXX command line. Also, add -lpthreads to the LIBS. -# libpthreads.so comes with the sources of Linux libc-5.3.*, you need -# to compile it yourself (no binaries included) -- -# Jan Rychter <jwr@icm.edu.pl> - -ifeq (,$(debug)) - debug = 1 -endif -ifeq (,$(optimize)) - optimize = 1 -endif - xt_reactor = 0 - -PLATFORM_XT_CPPFLAGS= -PLATFORM_XT_LIBS=-lXt -PLATFORM_XT_LDFLAGS= - -fl_reactor = 0 - -PLATFORM_FL_CPPFLAGS= -PLATFORM_FL_LIBS=-lfltk -PLATFORM_FL_LDFLAGS= - -PLATFORM_X11_CPPFLAGS= -PLATFORM_X11_LIBS=-lX11 -PLATFORM_X11_LDFLAGS=-L/usr/X11R6/lib - -PLATFORM_GL_CPPFLAGS= -PLATFORM_GL_LIBS=-lMesaGL -PLATFORM_GL_LDFLAGS= - -PLATFORM_AIO_SUPPORT := \ - $(shell test -e /usr/lib/librt.so && echo -DACE_HAS_AIO_CALLS) - -ifeq ($(NO_IMPLICIT_TEMPLATES),) - NO_IMPLICIT_TEMPLATES = -fno-implicit-templates -endif - -CC = gcc -CXX = g++ -CFLAGS += -W -Wall -pipe \ - -D_POSIX_THREADS -D_POSIX_THREAD_SAFE_FUNCTIONS -D_REENTRANT \ - $(PLATFORM_AIO_SUPPORT) -CCFLAGS += $(CFLAGS) $(NO_IMPLICIT_TEMPLATES) -DCFLAGS += -g -DLD = $(CXX) -LD = $(CXX) -LIBS += -ldl -lpthread -ifeq (-DACE_HAS_AIO_CALLS,$(PLATFORM_AIO_SUPPORT)) - LIBS += -lrt -endif -OCFLAGS += -O3 -PIC = -fPIC -AR = ar -ARFLAGS = rsuv -RANLIB = @true -SOFLAGS = $(CPPFLAGS) -shared -SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.o $<; \ - $(SOLINK.cc) -o $@ $(LDFLAGS) $(VSHDIR)$*.o -# Added line below to support "Executable Shared Object" files (as -# needed by the service configurator). -# Marius Kjeldahl <mariusk@sn.no, marius@funcom.com> -ESOBUILD = $(COMPILEESO.cc) $(PIC) -shared -o $(VSHDIR)$*.so $< -ifndef PRELIB - PRELIB = @true -endif # ! PRELIB - - -#### GNU gas has a string limit of 4096 characters. On Alphas, -#### builds will fail due to running over that limit. There are -#### at least two workarounds: -#### 1) Change the limit to 8192 characters and rebuild gas. See -#### ACE-INSTALL.html for more information. -#### 2) Don't use -g when compiling those files. -#### If you're building on an Alpha and you haven't hacked and -#### rebuilt gas, you might need to uncomment the following. -#### ifeq ($(debug),1) -#### SUPPRESS_DASH_G = 1 -#### endif # debug diff --git a/include/makeinclude/platform_linux_lxpthreads.GNU b/include/makeinclude/platform_linux_lxpthreads.GNU deleted file mode 100644 index 553b1ecc0cf..00000000000 --- a/include/makeinclude/platform_linux_lxpthreads.GNU +++ /dev/null @@ -1,84 +0,0 @@ -# $Id$ - -# For pthreads support on Linux, you need -# -D_POSIX_THREADS -# -D_POSIX_THREAD_SAFE_FUNCTIONS -# in the CXX command line. Also, add -lpthreads to the LIBS. -# libpthreads.so comes with the sources of Linux libc-5.3.*, you need -# to compile it yourself (no binaries included) -- -# Jan Rychter <jwr@icm.edu.pl> - -ifeq (,$(debug)) - debug = 1 -endif -ifeq (,$(optimize)) - optimize = 1 -endif - xt_reactor = 0 - -PLATFORM_XT_CPPFLAGS= -PLATFORM_XT_LIBS=-lXt -PLATFORM_XT_LDFLAGS= - -fl_reactor = 0 - -PLATFORM_FL_CPPFLAGS= -PLATFORM_FL_LIBS=-lfltk -PLATFORM_FL_LDFLAGS= - -PLATFORM_X11_CPPFLAGS= -PLATFORM_X11_LIBS=-lX11 -PLATFORM_X11_LDFLAGS=-L/usr/X11R6/lib - -PLATFORM_GL_CPPFLAGS= -PLATFORM_GL_LIBS=-lMesaGL -PLATFORM_GL_LDFLAGS= - -PLATFORM_AIO_SUPPORT := \ - $(shell test -e /usr/lib/librt.so && echo -DACE_HAS_AIO_CALLS) - -ifeq ($(NO_IMPLICIT_TEMPLATES),) - NO_IMPLICIT_TEMPLATES = -fno-implicit-templates -endif - -CC = gcc -CXX = g++ -CFLAGS += -W -Wall -pipe \ - -D_POSIX_THREADS -D_POSIX_THREAD_SAFE_FUNCTIONS -D_REENTRANT \ - $(PLATFORM_AIO_SUPPORT) -CCFLAGS += $(CFLAGS) $(NO_IMPLICIT_TEMPLATES) -DCFLAGS += -g -DLD = $(CXX) -LD = $(CXX) -LIBS += -ldl -lpthread -ifeq (-DACE_HAS_AIO_CALLS,$(PLATFORM_AIO_SUPPORT)) - LIBS += -lrt -endif -OCFLAGS += -O3 -PIC = -fPIC -AR = ar -ARFLAGS = rsuv -RANLIB = @true -SOFLAGS = $(CPPFLAGS) -shared -SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.o $<; \ - $(SOLINK.cc) -o $@ $(LDFLAGS) $(VSHDIR)$*.o -# Added line below to support "Executable Shared Object" files (as -# needed by the service configurator). -# Marius Kjeldahl <mariusk@sn.no, marius@funcom.com> -ESOBUILD = $(COMPILEESO.cc) $(PIC) -shared -o $(VSHDIR)$*.so $< -ifndef PRELIB - PRELIB = @true -endif # ! PRELIB - - -#### GNU gas has a string limit of 4096 characters. On Alphas, -#### builds will fail due to running over that limit. There are -#### at least two workarounds: -#### 1) Change the limit to 8192 characters and rebuild gas. See -#### ACE-INSTALL.html for more information. -#### 2) Don't use -g when compiling those files. -#### If you're building on an Alpha and you haven't hacked and -#### rebuilt gas, you might need to uncomment the following. -#### ifeq ($(debug),1) -#### SUPPRESS_DASH_G = 1 -#### endif # debug diff --git a/include/makeinclude/platform_linux_pthread.GNU b/include/makeinclude/platform_linux_pthread.GNU deleted file mode 100644 index 5ea573914b4..00000000000 --- a/include/makeinclude/platform_linux_pthread.GNU +++ /dev/null @@ -1,31 +0,0 @@ -# $Id$ - -# For pthreads support on Linux, you need -# -D_MIT_POSIX_THREADS -# -D_POSIX_THREADS -# -D_POSIX_THREAD_SAFE_FUNCTIONS -# in the CXX command line. Also, add -lpthreads to the LIBS. -# libpthreads.so comes with the sources of Linux libc-5.3.*, you need -# to compile it yourself (no binaries included) -- -# Jan Rychter <jwr@icm.edu.pl> - -debug = 1 -optimize = 1 - -CC = gcc -CXX = g++ -CFLAGS += -w -fno-strict-prototypes \ - -D_MIT_POSIX_THREADS -D_POSIX_THREADS -D_POSIX_THREAD_SAFE_FUNCTIONS -CCFLAGS += $(CFLAGS) -fno-implicit-templates -DCFLAGS += -g -DLD = $(CXX) -LD = $(CXX) -LIBS += -lpthreads -OCFLAGS += -O2 -PIC = -fPIC -AR = ar -ARFLAGS = rsuv -RANLIB = @true -SOFLAGS = $(CPPFLAGS) -shared -SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.so $< -PRELIB = @true diff --git a/include/makeinclude/platform_lynxos.GNU b/include/makeinclude/platform_lynxos.GNU deleted file mode 100644 index 4fbdb41ea01..00000000000 --- a/include/makeinclude/platform_lynxos.GNU +++ /dev/null @@ -1,95 +0,0 @@ -# $Id$ -# -# LynxOS with g++. Defaults to LynxOS Version 3.0.0. For Version 2.5.0, -# for example, add "VERSION=2.5.0" to your make invocation. - -#### NOTE: It's best to create a file that includes this one, instead -#### of symlinking it. That way, you can easily override the default -#### configuration. For example, to configure for a PowerPC target, I -#### use a include/makeinclude/platform_macros.GNU that contains the -#### following lines (without comment markers): -#### -#### LYNXTARGET = ppc -#### include $(ACE_ROOT)/include/makeinclude/platform_lynxos.GNU -#### -#### Similarly, the default VERSION and HOST_OS settings (see below) -#### can be overridden for your particular platform. - - -debug = 1 -shared_libs = -static_libs = 1 -#### optimize is defined below because it is version-dependent. - -ifneq ($(shell uname -s),LynxOS) - CROSS-COMPILE = 1 - - #### The following may need to be customized for your host or target type. - #### Or, you can source the appropriate (for your shell) Lynx SETUP file - #### before running "make". - - ifeq (,$(VERSION)) - VERSION=3.0.0 - endif # VERSION - - ifeq (,$(LYNXTARGET)) - LYNXTARGET = x86 - endif # LYNXTARGET - - ifeq (,$(HOST_OS)) - ifeq (2.5.0,$(VERSION)) - HOST_OS = sunos - else - ifeq ($(LYNXTARGET),x86) - HOST_OS = sunos-coff - else - ifeq ($(LYNXTARGET),ppc) - HOST_OS = sunos-xcoff - endif # ppc - endif # x86 - endif # VERSION - endif # HOST_OS - - ifeq (,$(findstring /usr/lynx/$(VERSION)/$(LYNXTARGET),$(PATH))) - PATH:=\ -/usr/lynx/$(VERSION)/$(LYNXTARGET)/cdk/$(HOST_OS)-$(LYNXTARGET)/bin:/usr/lynx/$(VERSION)/$(LYNXTARGET)/cdk/$(HOST_OS)-$(LYNXTARGET)/usr/bin:$(PATH) - endif # PATH -endif # ! LynxOS - -ifeq (2.5.0,$(VERSION)) - # NOTE: On LynxOS Version 2.5.0, optimization causes these warnings: - # warning: internal compiler error: debugging info corrupted - optimize = 0 -else - optimize = 1 - - #### Even though the g++ version is 2.7-97r1, it supports nested - #### classes, so it can build the TAO tests. - ACE_HAS_GNUG_PRE_2_8 = 0 -endif # VERSION - -CC = gcc -CXX = g++ -CFLAGS += -mthreads -pipe -ansi -Wpointer-arith -#### -Winline complains a lot with -O2. -#### CFLAGS += -Winline -#### LynxOS 3.0.0's g++ has a lot of warnings about non-virtual base class -#### destructors with -Wall. -ifeq (2.5.0,$(VERSION)) - CFLAGS += -Wall -endif # VERSION -CCFLAGS += $(CFLAGS) -fno-implicit-templates -DCFLAGS += -g -DLD = $(CXX) -LD = $(CXX) -LIBS += -lnetinet -lnsl -OCFLAGS += -O2 -AR = ar -ARFLAGS = ruv -RANLIB = @true -PRELIB = @true - -# To save much disk space, strip all executables. Comment the -# following line out if you want to debug. Or, added "POSTLINK=" -# to your make invocation. -POSTLINK = ; strip $@ diff --git a/include/makeinclude/platform_m88k.GNU b/include/makeinclude/platform_m88k.GNU deleted file mode 100644 index 382c6e2adc2..00000000000 --- a/include/makeinclude/platform_m88k.GNU +++ /dev/null @@ -1,30 +0,0 @@ -# $Id$ - -# SunOS 5.x (Solaris 2.x) with SunC++ 4.x -# *not* using Orbix - -debug = 1 -optimize = 1 - -CC = gcc -CXX = g++ -CFLAGS += -w -CCFLAGS += $(CFLAGS) -D__m88k__ -fno-implicit-templates -fno-strict-prototypes -DCFLAGS += -g -DLD = $(CXX) -LD = $(CXX) -INCLDIRS += -I$(ACE_ROOT) -I. -INCLDIRS += -I/devel/rmm/v1.0/local/src/threads/include -LDFLAGS += -L $(ACE_ROOT)/ace -L ./ -LDFLAGS += -L/devel/rmm/v1.0/local/src/threads/lib -LIBS += -lsocket -ldl -lnsl -lgen -lstdc++ -lg++ -LIBS += -lgthreads -lgmalloc -OCFLAGS += -O2 -PIC = -fpic -AR = ar -ARFLAGS = ruv -RANLIB = /bin/true -SOFLAGS = -G $(CPPFLAGS) -SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.o $<; \ - $(SOLINK.cc) -o $@ -h $@ $(LDFLAGS) $(VSHDIR)$*.o -PRELIB = @true diff --git a/include/makeinclude/platform_mvs.GNU b/include/makeinclude/platform_mvs.GNU deleted file mode 100644 index 69215470627..00000000000 --- a/include/makeinclude/platform_mvs.GNU +++ /dev/null @@ -1,34 +0,0 @@ -# $Id$ - -# For MVS OpenEdition platform - -debug = 0 - -CXX = cxx -DCFLAGS += -g -DCCFLAGS += -g -CPPFLAGS += -+ -DEFFLAGS = -D_ALL_SOURCE -DNDEBUG -CC = $(CXX) -LD = $(CXX) -DLD = $(CXX) -AR = ar -ARFLAGS = ruv -RANLIB = echo -#LDFLAGS = -W l,p,map - -# MVCMD needed because cxx does not use the -o option to place objects -MVCMD = @test ! -s $(@F) || mv $(@F) $(@D)/$(@F) - -# Used to build static executables -ACELIB_STATIC = -lACE - -# Used to build shared executables (much smaller in size) -ACELIB_DLL = $(ACE_ROOT)/ace/libACE.x - -# set accordingly to build either static or shared executables -ACELIB = $(ACELIB_DLL) - -SOFLAGS = -W l,dll -PIC = -W c,exportall -static_libs = 1 diff --git a/include/makeinclude/platform_netbsd.GNU b/include/makeinclude/platform_netbsd.GNU deleted file mode 100644 index d9e08b01139..00000000000 --- a/include/makeinclude/platform_netbsd.GNU +++ /dev/null @@ -1,28 +0,0 @@ -# $Id$ - -# platform_netbsd.GNU - -# ***** Notice: This file is still under testing. ***** -# To be used on netbsd platform without pthread support. - -debug = 1 -optimize = 1 -versioned_so = 1 - -CC = gcc -CXX = g++ -CFLAGS += -w -fno-strict-prototypes -CCFLAGS += $(CFLAGS) -fno-implicit-templates -DCFLAGS += -g -DLD = ld -LD = $(CXX) -LIBS += -lstdc++ #-lcompat -lresolv -##OCFLAGS += -O2 -PIC = -fpic -DPIC -AR = ar -ARFLAGS = ruv -RANLIB = ranlib - -SOFLAGS = -Bshareable -x /usr/lib/c++rt0.o -SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.so $< -PRELIB = @echo diff --git a/include/makeinclude/platform_osf1_3.2.GNU b/include/makeinclude/platform_osf1_3.2.GNU deleted file mode 100644 index d2da4954e75..00000000000 --- a/include/makeinclude/platform_osf1_3.2.GNU +++ /dev/null @@ -1,27 +0,0 @@ -# $Id$ - -# This platform macros file is intended to work with Digital UNIX 3.2 -# (OSF/1 3.2g) with CXX 5.7 or later. - -debug = 1 - -CC = cxx -CXX = $(CC) -CFLAGS += -threads -#### CCFLAGS += -x cxx -CCFLAGS += $(CFLAGS) -w0 -DCFLAGS += -g -O0 -#### DLD = ld -shared -expect_unresolved '*' -DLD = ld -LD = $(CXX) -#### LIBS += -lpthreads -lmach -lsys5 -lxti -ltli -lcxx -lexc -lc -lrt -LIBS += -qltli_r -ltli -qlrt_r -lrt -qlcxxstd_r -lcxxstd -qlcxx_r \ - -lcxx -qlots_r -lots -lpthreads -lmach -lexc -lc_r -lc -#### PIC = -pic -ARFLAGS = cruv -RANLIB = /usr/bin/true -#### SOFLAGS = -shared -SOFLAGS = -L/usr/lib/cmplrs/cxx -rpath /usr/lib/cmplrs/cxx \ - -L$(ACE_ROOT)/ace -L./ -g2 -O0 -shared -SOBUILD = $(RM) $@; $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.o $< && \ - ln $(VSHDIR)$*.o $@ diff --git a/include/makeinclude/platform_osf1_4.0.GNU b/include/makeinclude/platform_osf1_4.0.GNU deleted file mode 100644 index 0bef1ac4e2b..00000000000 --- a/include/makeinclude/platform_osf1_4.0.GNU +++ /dev/null @@ -1,73 +0,0 @@ -# $Id$ - -# This platform macros file is intended to work with -# Digital UNIX 4.0 (OSF/1 4.0), using the cxx compiler.. - -debug = 1 -exceptions = 1 -rtti = 1 - -CC = cxx -CXX = $(CC) -#### Note: -pthread uses POSIX threads. If you want to use DCE threads -#### instead, change "-pthread" to "-threads". -CFLAGS += -pthread - -#### These flags can only be used with cxx Version 6.0 and later. -#### They are enabled by default; they can be disabled by settting -#### CXX_VER to CXX_5 either on the make command line, or by -#### or by setting the CXX_VER environment variable to CXX_5. -ifneq ($(CXX_VER),CXX_5) - WARNING_FLAGS += -w0 - ifneq (,$(VERBOSE_WARNING)) - WARNING_FLAGS += -msg_display_number -msg_display_tag - endif # VERBOSE_WARNING - - ifneq (,$(optimize)) - #### See ace/config-osf1-4.0.h for the meaning of this warning. - #### It's not necessary on DU 5.0. - WARNING_FLAGS += -msg_disable 1016 - endif # optimize - - ifndef ACE_DU_VERSION - # In case this file wasn't included by platform_osf1_cxx.GNU: - # 9: nested comment not allowed. But there's one in /usr/include/pdsc.h! - WARNING_FLAGS += -msg_disable 9 - endif # ACE_DU_VERSION -endif # 6.0 or later - -CCFLAGS += $(CFLAGS) -ptr ptrepository $(WARNING_FLAGS) -ifeq ($(rtti),) - CCFLAGS += -nortti -endif # rtti -DCFLAGS += -g -O0 -DLD = $(CXX) -LD = $(CXX) -LIBS += $(CFLAGS) -ptr ptrepository -ltli -lrt -MATHLIB = -lm -OCFLAGS += -O4 -PIC = -ARFLAGS = cruvZ -# When libraries are archived, a hash index is automatically created -# so there is no need for ranlib -RANLIB = @true -#### The -hidden [...] -non_hidden business avoids multiply defined -#### symbols between the shared library and libcxxstd.a. It's the -#### workaround recommended in PTR 43-4-204. -SOFLAGS = -hidden /usr/lib/cmplrs/cxx/libcxxstd.a -non_hidden \ - -shared -use_ld_input $(ACELIB) -SOBUILD = $(RM) $@; $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.o $< && \ - ln $(VSHDIR)$*.o $@ - -ifndef exceptions - #### Disable the default exception handling of cxx >= 6.0. - #### This is untested. exceptions=1 is the default, so it's not used - #### by default. - ifndef CXX_VERSION - CXX_VERSION := $(shell $(CXX) -V) - endif # ! CXX_VERSION - - ifeq (6.,$(findstring 6.,$(CXX_VERSION))) - CCFLAGS += -nocleanup - endif # 6.x -endif # ! exceptions diff --git a/include/makeinclude/platform_osf1_4.0_g++.GNU b/include/makeinclude/platform_osf1_4.0_g++.GNU deleted file mode 100644 index e05a62a38d1..00000000000 --- a/include/makeinclude/platform_osf1_4.0_g++.GNU +++ /dev/null @@ -1,25 +0,0 @@ -# $Id$ - -# This platform macros file is intended to work with Digital UNIX 4.0 -# (OSF/1 4.0) and GCC in version 2.7.2.1 (or newer). - -debug = 1 -optimize = 1 - -CC = gcc -CXX = g++ -CFLAGS += -D_REENTRANT -CCFLAGS += $(CFLAGS) -fno-implicit-templates -fno-strict-prototypes -DCFLAGS += -g -LD = $(CXX) -DLD = $(CXX) -LIBS += -lpthread -lmach -lexc -ltli -lrt -OCFLAGS += -O2 -PIC = -fpic -ARFLAGS = cruvZ -# When libraries are archived, a hash index is automatically created so there -# is no need for ranlib -RANLIB = /usr/bin/true -SOFLAGS = -shared $(CPPFLAGS) $(ACELIB) -SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.so $< -PRELIB = @true diff --git a/include/makeinclude/platform_osf1_4.0_kcc.GNU b/include/makeinclude/platform_osf1_4.0_kcc.GNU deleted file mode 100644 index 0b921097354..00000000000 --- a/include/makeinclude/platform_osf1_4.0_kcc.GNU +++ /dev/null @@ -1,37 +0,0 @@ -# $Id$ - -# This platform macros file is intended to work with Digital UNIX 4.0 -# (OSF/1 4.0) and KAI C++ 3.3f. - -debug = 1 -optimize = 1 - -# WARNING_FLAGS += -# 9: nested comment not allowed. But there's one in /usr/include/pdsc.h! -# and /usr/include/net/if_types.h -# 111: statement is unreachable. There's a whole bunch of these -# in the ace code. -WARNING_FLAGS += --diag_suppress 9,111 - -CC = KCC -CXX = $(CC) -CFLAGS += -D_REENTRANT -CCFLAGS += $(CFLAGS) -DNULL=0 $(WARNING_FLAGS) -ifeq ($(optimize),1) -DCFLAGS += -g3 -else -DCFLAGS += +K0 -g -endif -LD = $(CC) -DLD = $(CC) -LIBS += -lpthread -lmach -lexc -ltli -lrt -lm -OCFLAGS += +K3 -O -PIC = -AR = $(CC) -ARFLAGS = -o -# When libraries are archived, a hash index is automatically created so there -# is no need for ranlib -RANLIB = /usr/bin/true -SOFLAGS = $(CPPFLAGS) -L$(ACE_ROOT)/ace $(ACELIB) -lc -SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.so $< -PRELIB = @true diff --git a/include/makeinclude/platform_osf1_4.0_rcc.GNU b/include/makeinclude/platform_osf1_4.0_rcc.GNU deleted file mode 100644 index f188fe2d682..00000000000 --- a/include/makeinclude/platform_osf1_4.0_rcc.GNU +++ /dev/null @@ -1,25 +0,0 @@ -# $Id$ - -# This platform macros file is intended to work with Rational C++ (2.4.1) on -# Digital UNIX 4.0 (OSF/1 4.0). - -debug = 1 -exceptions = 1 - -CC = rcc -CXX = RCC -CFLAGS += -D_REENTRANT -CCFLAGS += $(CFLAGS) -nosienna -DCFLAGS += -g -O0 -DLD = $(CXX) -LD = $(CXX) -LIBS += -lpthread -lc_r -ltli -lrt -OCFLAGS += -O4 -PIC = -pic -ARFLAGS = cruvZ -# When libraries are archived, a hash index is automatically created -# so there is no need for ranlib -RANLIB = /usr/bin/true -SOFLAGS = -shared # -use_ld_input $(ACELIB) -SOBUILD = $(RM) $@; $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.o $< && \ - ln $(VSHDIR)$*.o $@ diff --git a/include/makeinclude/platform_osf1_cxx.GNU b/include/makeinclude/platform_osf1_cxx.GNU deleted file mode 100644 index 285499f3454..00000000000 --- a/include/makeinclude/platform_osf1_cxx.GNU +++ /dev/null @@ -1,30 +0,0 @@ -# $Id$ - -# This platform macros file is intended to work with -# Digital UNIX using the cxx compiler. - -ifndef ACE_DU_VERSION - ACE_DU_VERSION := $(shell uname -r) -endif # ACE_DU_VERSION - -ifeq (3.,$(findstring 3.,$(ACE_DU_VERSION))) - include $(ACE_ROOT)/include/makeinclude/platform_osf1_3.2.GNU - -else # ! 3.x -ifeq (4.,$(findstring 4.,$(ACE_DU_VERSION))) - include $(ACE_ROOT)/include/makeinclude/platform_osf1_4.0.GNU - CFLAGS += -DDIGITAL_UNIX=4 - ifneq ($(CXX_VER),CXX_5) - # 9: nested comment not allowed. But there's one in /usr/include/pdsc.h! - WARNING_FLAGS += -msg_disable 9 - endif # 6.0 or later - -else # ! 4.x -ifeq (5.,$(findstring 5.,$(ACE_DU_VERSION))) - include $(ACE_ROOT)/include/makeinclude/platform_osf1_4.0.GNU - CFLAGS += -DDIGITAL_UNIX=5 - SOFLAGS = -shared -use_ld_input $(ACELIB) - -endif # 5.x -endif # ! 4.x -endif # ! 3.x diff --git a/include/makeinclude/platform_psos_diab.GNU b/include/makeinclude/platform_psos_diab.GNU deleted file mode 100644 index d250c30ad6d..00000000000 --- a/include/makeinclude/platform_psos_diab.GNU +++ /dev/null @@ -1,189 +0,0 @@ -# $Id$ -# pSOS with Diab Data C++ 4.1a Compiler - -# ================================================================ -# pSOS sTUFF -# ================================================================ - -PSS_LIBC_DIR = $(PSS_ROOT)/sys/libc -PSS_SYS_DIR = $(PSS_ROOT)/sys/os - -PSOS_LIBS = -L $(PSS_LIBC_DIR) -lprepc -lcxxsp \ - -L $(PSS_SYS_DIR) -lsysxx -lsys - -PSS_BSP_LIB = -L $(PSS_BSP) -lbsp - -# DIAB_LIBS = -L $(DIABLIB)/MC60FS/psos -lpsos - -# DIAB_LIBS = -L $(DIABLIB)/MC60FS -li -lchar -lg -limpl -lram -ld \ -# -L $(DIABLIB)/MC60FS -lcfp -lm -limpfp -lcomplex -lios \ -# -L $(DIABLIB)/MC60FS/psos -lpsos \ -# -L $(PSS_ROOT)/sys/libc -lprepc - -# DIAB_LIBS = -L $(DIABLIB)/MC60FS -limpfp \ -# -L $(DIABLIB)/MC60F -limpl \ -# -L $(DIABLIB)/MC60F/psos -lpsos - - -#DIAB_LIBS = -L $(DIABLIB)/MC60F/psos -lc \ -# -L $(PSS_ROOT)/sys/libc -lprepc -# -L $(DIABLIB)/MC60F -lchar -lg -limpl -lram -ld \ -# -L $(DIABLIB)/MC60FS -lcfp -lm -limpfp -lcomplex -lios -li - -PSOSINCL = -I$(PSS_ROOT)/include -I$(PSS_BSP) -# PSOSINCL = -Y I,$(PSS_ROOT)/include -I$(PSS_BSP) - -# hacks to resolve incompatibilities between the compiler and OS headers -DIAB_PSOS_HACKS = -D__Itypes -D_TIME_T_DEFINED -D_WCHAR_T_DEFINED -D__wchar_t -# DIAB_PSOS_HACKS = -D__Itypes -D_WCHAR_T_DEFINED -D__wchar_t - -# ================================================================ -# Compilation Settings and Flags -# ================================================================ - -# turn on debugging -debug = 1 - -# turn on optimization -optimize = 1 - -# turn off shared libraries -shared_libs = - -# turn on static libraries -static_libs = 1 - - -# C Compiler -CC = dcc -tMC68060FS:psos -# -WDCDCONFIG=psos.conf - -# C Debug Compiler Flags -# -D<name>[=<value>] defines symbol to preprocessor -# -U<name> undefine preprocessor symbol -# -I<path> adds a directory path to the include file search path -# -V[V] display the current version number of D-C++ (this could be -# useful for crafting a single pSOS config.h file) -# -W is used to pass arguments to specific tools (compiler, linker, etc), -# to change which tool is used, etc -# -o renames the output (we need to do this to avoid colliding with .i files) -# -X<name | number>[=<value>]gives detailed control of the compiler -# -Xlint turns on a bunch of useful warning messages -# -Xno-old-style disables the use of old style C function declarations -# and narrows the compiler error messages -# -Xmnem-emb accepts only Motorola Embedded Mnemonics (assembler directive) -# -Xkeywords=0x04 defines the inline keyword to be valid -# -Xkill-opt=0x400 turns off the split optimization. Per Jim Terman -# at DDI, this fixes a known problem -# -Y changes the default search path for include files and libraries -# -t<CPU><object format><floating point support>[:<environment>] is used to -# describe the target board. The object format is F for ELF, E for COFF, -# or N for GNU/VxWorks. The floating point support is H for hardware -# support, S for software support, or N for no floating point support -CFLAGS += -D__DIAB -D__DIAB_42a -Xkill-opt=0x400 -Xno-old-style -Xlint $(PSOSINCL) - -# C Compiler Debug Flags (passed iff debug == 1) -# -# prints subprograms with arguments as they are executed -# -## prints subprograms with arguments without executing them -# -### prints subprograms with arguments (in quotes) without executing them -# -g embeds debug info but turns off a bunch of optimizations, including inlining -# -g1 embeds debug info but not line numbers, and preserves inlining -# -v runs the compiler in verbose mode -# -w suppresses warnings -# -H prints path names of all include files to stderr -# -E stops compilation after preprocessing and sends -# results to stdout -# -P same as -E except it sends it to the source file specified by the -o flag -# (IMPORTANT: for ACE, some *other* file name must be specified, as the -# default behavior for -P without the -o option will overwrite *our* -# .i (inline) file) -# -X<name | number>[=<value>]gives detailed control of the compiler -# -Xlint turns on a bunch of useful warning messages -# -Xstop-on-warning treats warnings like errors and stops compilation -# -Xinit-locals[=<mask>] initializes memory pattern for local variables -# -Xno-optimized-debug turns off optimizations for debugging -DCFLAGS += -g -w -Ws -#DCFLAGS += -g -w -Ws -P -o precomp.out -#DCFLAGS += -g -w -Ws -H - -# C Compiler Optimization Flags (passed iff optimize == 1) -# -O -# -XO -# OCFLAGS += -XO - -# C++ Compiler -CXX = dplus -tMC68060FS:psos -### This (without the above -t option cannot resolve DOBJECT, etc.) -# CXX = dplus - -# C++ Compiler Flags -# -o renames the output (we need to do this to avoid colliding with .i files) -# -W is used to pass arguments to specific tools (compiler, linker, etc), -# to change which tool is used, etc -# -X<name | number>[=<value>]gives detailed control of the compiler -# -Xexception enables exception handling -# -Xno-implicit-templates produces smaller code, but requires explicit -# template instantiation (see pp 91 of D-C++ user guide) -# -Xcomdat (per Jim Terman) is the "preferred" way of instantiating templates as of 4.1a (but, there are problems there with Synch_T.cpp and Synch_T.h) - -#CCFLAGS += $(CFLAGS) $(DIAB_PSOS_HACKS) -Xno-implicit-templates -#CCFLAGS += $(CFLAGS) $(DIAB_PSOS_HACKS) -Xno-implicit-templates=3 -#CCFLAGS += $(CFLAGS) $(DIAB_PSOS_HACKS) -Xno-implicit-templates=2 -#CCFLAGS += $(CFLAGS) $(DIAB_PSOS_HACKS) -Xcomdat -CCFLAGS += $(CFLAGS) $(DIAB_PSOS_HACKS) - -# C++ Compiler Debug Flags (passed iff debug == 1) -DCCFLAGS += $(DCFLAGS) - -# Dynamic Linker -# DLD = dld -DLD = dplus -tMC68060FS:psos -Wm$(PSS_BSP)/ram.lnk - -# Static Linker -# LD = dld -LD = dplus -tMC68060FS:psos -Wm$(PSS_BSP)/ram.lnk - -# Static Linker Flags -# -L<path> adds a directory path to the linker search path -# -l<name> adds a library name to the list the linker uses -# -f<val> fills in holes in an output section with the given 16 bit pattern -# -m generates a link map of the input and output sections on stdout -# -m2 generates a more detailed link map of the input and output sections on stdout -# -r performs incremental link -# -r2 add relocation tables, treat unresolved symbols as errors -# -r3 add relocation tables, treat unresolved symbols as warnings -# -Xcheck-overlap checks for overlap of output sections and sections that wrap around -# 32 bit address boundary -# -Xdont-die forces the linker to continue after errors -# -Xexpl-instantiations causes linker to write source lines of explicit template -# instantiations to stdout -#LDFLAGS += -Xdont-die -Xexpl-instantiations -#LDFLAGS += -Xdont-die -#LDFLAGS += -Xdont-die -#LDFLAGS += -Xdont-die -Xexpl-instantiations - -# Additional libraries used by the linker -LIBS += $(PSOS_LIBS) $(PSS_BSP_LIB) -#LIBS += $(PSOS_LIBS) $(PSS_BSP_LIB) $(DIAB_LIBS) - -# position independent code flag (do we need this ?) -# PIC = -fpic - -# Archive Utility -AR = dar - -# Archive Utility Flags -# -d[lv] delete the named files from the archive -# -m[abiv] move the named files -# -r[abciluv] replace the named files in the archive -ARFLAGS = -r - -RANLIB = echo - -# Shared Object Library Stuff (do we need this ?) -# SOFLAGS = -G $(CPPFLAGS) -# SOBUILD - compile into .so directly -# SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.so $< - -# Unidentified Stuff -# PRELIB = @true diff --git a/include/makeinclude/platform_psos_diab_ppc.GNU b/include/makeinclude/platform_psos_diab_ppc.GNU deleted file mode 100644 index 5bfe2b61993..00000000000 --- a/include/makeinclude/platform_psos_diab_ppc.GNU +++ /dev/null @@ -1,200 +0,0 @@ -# $Id$ -# pSOS with Diab Data C++ 4.1a Compiler - -# ================================================================ -# pSOS sTUFF -# ================================================================ - -PSS_LIBC_DIR = $(PSS_ROOT)/sys/libc -PSS_SYS_DIR = $(PSS_ROOT)/sys/os - -# PSOS_LIBS = -L $(PSS_LIBC_DIR) -lprepcH -lcxxsp \ -# -L $(PSS_SYS_DIR) -lsysxx -lsys - -PSOS_LIBS = -L $(PSS_LIBC_DIR) -lprepcH -lcxxsp \ - -L $(PSS_SYS_DIR) -lsys - -PSS_BSP_LIB = -L $(PSS_BSP) -lbsp - -# DIAB_LIBS = -L $(DIABLIB)/MC60FS/psos -lpsos - -# DIAB_LIBS = -L $(DIABLIB)/MC60FS -li -lchar -lg -limpl -lram -ld \ -# -L $(DIABLIB)/MC60FS -lcfp -lm -limpfp -lcomplex -lios \ -# -L $(DIABLIB)/MC60FS/psos -lpsos \ -# -L $(PSS_ROOT)/sys/libc -lprepc - -# DIAB_LIBS = -L $(DIABLIB)/MC60FS -limpfp \ -# -L $(DIABLIB)/MC60F -limpl \ -# -L $(DIABLIB)/MC60F/psos -lpsos - - -#DIAB_LIBS = -L $(DIABLIB)/MC60F/psos -lc \ -# -L $(PSS_ROOT)/sys/libc -lprepc -# -L $(DIABLIB)/MC60F -lchar -lg -limpl -lram -ld \ -# -L $(DIABLIB)/MC60FS -lcfp -lm -limpfp -lcomplex -lios -li - -PSOSINCL = -I$(PSS_ROOT)/include -I$(PSS_BSP) -# PSOSINCL = -Y I,$(PSS_ROOT)/include -I$(PSS_BSP) - -# hacks to resolve incompatibilities between the compiler and OS headers -DIAB_PSOS_HACKS = -D__Itypes -D_WCHAR_T_DEFINED -D__wchar_t - -# ================================================================ -# Compilation Settings and Flags -# ================================================================ - -# turn on debugging -debug = 1 - -# turn on optimization -optimize = 1 - -# turn off shared libraries -shared_libs = - -# turn on static libraries -static_libs = 1 - - -# C Compiler -CC = dcc -tPPC860ES:psos -# -WDCDCONFIG=psos.conf - -# C Debug Compiler Flags -# -D<name>[=<value>] defines symbol to preprocessor -# -U<name> undefine preprocessor symbol -# -I<path> adds a directory path to the include file search path -# -V[V] display the current version number of D-C++ (this could be -# useful for crafting a single pSOS config.h file) -# -W is used to pass arguments to specific tools (compiler, linker, etc), -# to change which tool is used, etc -# -o renames the output (we need to do this to avoid colliding with .i files) -# -X<name | number>[=<value>]gives detailed control of the compiler -# -Xlint turns on a bunch of useful warning messages -# -Xno-old-style disables the use of old style C function declarations -# and narrows the compiler error messages -# -Xmnem-emb accepts only Motorola Embedded Mnemonics (assembler directive) -# -Xkeywords=0x04 defines the inline keyword to be valid -# -Xkill-opt=0x400 turns off the split optimization. Per Jim Terman -# at DDI, this fixes a known problem -# -Y changes the default search path for include files and libraries -# -t<CPU><object format><floating point support>[:<environment>] is used to -# describe the target board. The object format is F for ELF, E for COFF, -# or N for GNU/VxWorks. The floating point support is H for hardware -# support, S for software support, or N for no floating point support -CFLAGS += -D__DIAB -D__DIAB_42a -Xkill-opt=0x400 -Xno-old-style -Xlint $(PSOSINCL) - -# C Compiler Debug Flags (passed iff debug == 1) -# -# prints subprograms with arguments as they are executed -# -## prints subprograms with arguments without executing them -# -### prints subprograms with arguments (in quotes) without executing them -# -g embeds debug info but turns off a bunch of optimizations, -# including inlining. It may also trigger a known bug in the Diab 4.2b -# and earlier compilers that results in an internal compiler error -# about ctmpl_copystm () when compiling certain ACE tests. -# -g1 embeds debug info but not line numbers, and preserves inlining. It may -# also trigger the same compiler bugs that -g triggers. -# -v runs the compiler in verbose mode -# -w suppresses warnings -# -H prints path names of all include files to stderr -# -E stops compilation after preprocessing and sends -# results to stdout -# -P same as -E except it sends it to the source file specified by the -o flag -# (IMPORTANT: for ACE, some *other* file name must be specified, as the -# default behavior for -P without the -o option will overwrite *our* -# .i (inline) file) -# -X<name | number>[=<value>]gives detailed control of the compiler -# -Xlint turns on a bunch of useful warning messages -# -Xstop-on-warning treats warnings like errors and stops compilation -# -Xinit-locals[=<mask>] initializes memory pattern for local variables -# -Xno-optimized-debug turns off optimizations for debugging -DCFLAGS += -g -w -Ws - -# These cause internal compiler errors for some ACE tests, because of the -# debug information embedded by the -g and -g1 switches (see above). -#DCFLAGS += -g1 -w -Ws -#DCFLAGS += -g -w -Ws -#DCFLAGS += -g -w -Ws -P -o precomp.out -#DCFLAGS += -g -w -Ws -H - -# C Compiler Optimization Flags (passed iff optimize == 1) -# -O -# -XO -# OCFLAGS += -XO - -# C++ Compiler -CXX = dplus -tPPC860ES:psos -### This (without the above -t option cannot resolve DOBJECT, etc.) -# CXX = dplus - -# C++ Compiler Flags -# -o renames the output (we need to do this to avoid colliding with .i files) -# -W is used to pass arguments to specific tools (compiler, linker, etc), -# to change which tool is used, etc -# -X<name | number>[=<value>]gives detailed control of the compiler -# -Xexception enables exception handling -# -Xno-implicit-templates produces smaller code, but requires explicit -# template instantiation (see pp 91 of D-C++ user guide) -# -Xcomdat (per Jim Terman) is the "preferred" way of instantiating templates as of 4.1a (but, there are problems there with Synch_T.cpp and Synch_T.h) - -#CCFLAGS += $(CFLAGS) $(DIAB_PSOS_HACKS) -Xno-implicit-templates -#CCFLAGS += $(CFLAGS) $(DIAB_PSOS_HACKS) -Xno-implicit-templates=3 -#CCFLAGS += $(CFLAGS) $(DIAB_PSOS_HACKS) -Xno-implicit-templates=2 -#CCFLAGS += $(CFLAGS) $(DIAB_PSOS_HACKS) -Xcomdat -CCFLAGS += $(CFLAGS) $(DIAB_PSOS_HACKS) - -# C++ Compiler Debug Flags (passed iff debug == 1) -DCCFLAGS += $(DCFLAGS) - -# Dynamic Linker -# DLD = dld -DLD = dplus -tPPC860ES:psos -Wm $(PSS_BSP)/ram.dld $(PSS_BSP)/anchor.dld - -# Static Linker -# LD = dld -LD = dplus -tPPC860ES:psos -Wm $(PSS_BSP)/ram.dld $(PSS_BSP)/anchor.dld - -# Static Linker Flags -# -L<path> adds a directory path to the linker search path -# -l<name> adds a library name to the list the linker uses -# -f<val> fills in holes in an output section with the given 16 bit pattern -# -m generates a link map of the input and output sections on stdout -# -m2 generates a more detailed link map of the input and output sections on stdout -# -r performs incremental link -# -r2 add relocation tables, treat unresolved symbols as errors -# -r3 add relocation tables, treat unresolved symbols as warnings -# -Xcheck-overlap checks for overlap of output sections and sections that wrap around -# 32 bit address boundary -# -Xdont-die forces the linker to continue after errors -# -Xexpl-instantiations causes linker to write source lines of explicit template -# instantiations to stdout -#LDFLAGS += -Xdont-die -Xexpl-instantiations -#LDFLAGS += -Xdont-die -#LDFLAGS += -Xdont-die -#LDFLAGS += -Xdont-die -Xexpl-instantiations - -# Additional libraries used by the linker -LIBS += $(PSOS_LIBS) $(PSS_BSP_LIB) -#LIBS += $(PSOS_LIBS) $(PSS_BSP_LIB) $(DIAB_LIBS) - -# position independent code flag (do we need this ?) -# PIC = -fpic - -# Archive Utility -AR = dar - -# Archive Utility Flags -# -d[lv] delete the named files from the archive -# -m[abiv] move the named files -# -r[abciluv] replace the named files in the archive -ARFLAGS = -r - -RANLIB = echo - -# Shared Object Library Stuff (do we need this ?) -# SOFLAGS = -G $(CPPFLAGS) -# SOBUILD - compile into .so directly -# SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.so $< - -# Unidentified Stuff -# PRELIB = @true diff --git a/include/makeinclude/platform_psos_tm.GNU b/include/makeinclude/platform_psos_tm.GNU deleted file mode 100644 index 42a00c54ec1..00000000000 --- a/include/makeinclude/platform_psos_tm.GNU +++ /dev/null @@ -1,47 +0,0 @@ -# $Id$ -# pSOS with Trimedia compiler - -#### -#### Notes: -#### -#### 1) This file assumes that the PSS_ROOT environment variable is set. -#### - -TCS = /net/neptune/neptune/n3/jin -#TCS = /net/video/video/v0/dtv_stage1/TCS/SunOS -HOST = tmsim -ENDIAN = el - -PSS_ROOT = $(TCS)/OS/pSOS/pSOSystem -PSS_SYS_DIR = $(PSS_ROOT)/sys/os -PSS_SYS_LIBS = $(PSS_SYS_DIR)/psos_tm_$(ENDIAN).o - -PSOS_SYSTEM = $(TCS)/OS/pSOS/pSOSystem -PSOS_DEFS = -DSC_PSOS=YES -DSC_PSOSM=NO -DSC_PNA=NO -D__sparc -CC = $(TCS)/bin/tmcc -$(ENDIAN) -host $(HOST) $(PSOS_DEFS) -CXX = $(TCS)/bin/tmCC -$(ENDIAN) -host $(HOST) $(PSOS_DEFS) -CINCS = -I. -I$(PSOS_SYSTEM)/include -#-I$(TCS)/include/$(HOST) -CFLAGS = $(CINCS) -CCFLAGS = $(CINCS) - -AR = $(TCS)/bin/tmar -ARFLAGS = rcv -LD = $(TCS)/bin/tmld -LDFLAGS = -bremoveunusedcode -bcompact -bfoldcode -ldev_g - -RANLIB = echo - -# -w suppresses warnings -# -H tells you which header files are being included -# (switch between these) -#DCFLAGS += -g -#DCFLAGS += -g -H -#DCFLAGS += -g -H -w -#DCFLAGS += -g -w - -LIBS += $(PSS_SYS_LIBS) - -#INCLDIRS += -I$(PSS_ROOT)/include -I$(PSS_BSP) -I$(ACE_ROOT)/ace - - diff --git a/include/makeinclude/platform_psosim_g++.GNU b/include/makeinclude/platform_psosim_g++.GNU deleted file mode 100644 index 3918f3c4122..00000000000 --- a/include/makeinclude/platform_psosim_g++.GNU +++ /dev/null @@ -1,57 +0,0 @@ -# $Id$ -# PSOSim with GNU g++ 2.7.2 - -#### -#### Notes: -#### -#### 1) This file assumes that the PSS_ROOT environment variable is set. -#### -#### 2) There is a separate Makefile in $(PSS_CFG_DIR) that must be used -#### to create $(PSS_CFG_DIR)/acepsos.a -#### -#### - -CPU_FAMILY = psosim -CPU = psosim -CPU_TOOLS = psosim -BOARD = psosim - -PSS_CFG_DIR = $(ACE_ROOT)/psosim -PSS_SYS_DIR = $(PSS_ROOT)/sys/os -PSS_SYS_LIBS = $(PSS_SYS_DIR)/prepc.a $(PSS_SYS_DIR)/psos.a $(PSS_SYS_DIR)/pna.a -PSS_BSP = $(PSS_ROOT)/bsps/psosim -PSS_BSP_LIB = $(PSS_BSP)/bsp.a - -debug = 1 -optimize = 1 - -CC = gcc -CXX = g++ -CFLAGS += -W -Wall -Wpointer-arith -pipe #### -Winline -CCFLAGS += $(CFLAGS) -fno-implicit-templates - -# -w suppresses warnings -# -H tells you which header files are being included -# (switch between these) -#DCFLAGS += -g -#DCFLAGS += -g -H -#DCFLAGS += -g -H -w -DCFLAGS += -g -w - -DLD = $(CXX) -LD = $(CXX) -LDFLAGS += # -z muldefs -LIBS += $(PSS_SYS_LIBS) $(PSS_BSP_LIB) $(PSS_CFG_DIR)/acepsos.a -lsocket -lnsl -lm -OCFLAGS += -O2 -#OCFLAGS += -O0 -PIC = -fpic -AR = ar -ARFLAGS = rsuv -RANLIB = @true -SOFLAGS = -G $(CPPFLAGS) -# SOBUILD - compile into .so directly -SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.so $< -PRELIB = @true -INCLDIRS += -I$(PSS_ROOT)/include -I$(PSS_BSP) -I$(ACE_ROOT)/ace - - diff --git a/include/makeinclude/platform_qnx_neutrino.GNU b/include/makeinclude/platform_qnx_neutrino.GNU deleted file mode 100644 index 682770780e5..00000000000 --- a/include/makeinclude/platform_qnx_neutrino.GNU +++ /dev/null @@ -1,35 +0,0 @@ -# $Id$ - -# QNX 4.25 hosted GNU g++ for Neutrino 2.0 Beta - -# NOTE: with g++ 2.8.0, you'll need to disable optimization in order to -# instantiate ACE_Map_Manager (ace/Map_Manager.cpp). The easiest -# way to do that is to set "optimize = 0", either below or on -# your make command line. - -ifeq (,$(debug)) - debug = 1 -endif -ifeq (,$(optimize)) - optimize = 0 -endif - -static_libs_only = 1 - -CC = /usr/gcc/bin/i386-nto-gcc -CXX = /usr/gcc/bin/i386-nto-g++ -CFLAGS += -pipe -W -Wall -Wpointer-arith -Winline -CCFLAGS += $(CFLAGS) -fno-implicit-templates -DCFLAGS += -g -DLD = $(CXX) -LD = $(CXX) -LDFLAGS += -LIBS += -lsocket -lstdc++ -OCFLAGS += -O2 -PIC = -fPIC -AR = /usr/gcc/bin/ar -ARFLAGS = ruv -RANLIB = /usr/gcc/bin/ranlib -SOFLAGS = -G $(CPPFLAGS) -shared -SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.so $< -PRELIB = @true diff --git a/include/makeinclude/platform_sco-nothread.GNU b/include/makeinclude/platform_sco-nothread.GNU deleted file mode 100644 index efbdad9bd02..00000000000 --- a/include/makeinclude/platform_sco-nothread.GNU +++ /dev/null @@ -1,22 +0,0 @@ -# $Id$ - -debug = 1 -optimize = 1 - -CC = gcc -CXX = g++ -CFLAGS += -w -CCFLAGS += $(CFLAGS) -fno-implicit-templates -fno-strict-prototypes -DCFLAGS += -g #### should this be -gstabs? -DLD = $(CXX) -LD = $(CXX) -LIBS = -lsocket -OCFLAGS = -O2 -PIC = -AR = ar -ARFLAGS = ruv -RANLIB = /bin/true - -SOFLAGS = $(CPPFLAGS) -SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.so $< -PRELIB = @true diff --git a/include/makeinclude/platform_sco5.0.0-CC-fsu-pthread.GNU b/include/makeinclude/platform_sco5.0.0-CC-fsu-pthread.GNU deleted file mode 100644 index b516ca8228d..00000000000 --- a/include/makeinclude/platform_sco5.0.0-CC-fsu-pthread.GNU +++ /dev/null @@ -1,36 +0,0 @@ -# $Id$ - -# Requires FSU pthreads and gcc 2.7.2 Skunkware 97 -# to produce libACE.so correctly changed the specs file for gcc 2.7.2 -# for not link -lc and -lgcc and other not shared libraries - -debug = 1 -optimize = 1 - -CC = cc -# for threads -# for no threads -#CXX = gcc -fno-implicit-templates -w -fno-strict-prototypes -# LDFLAGS += -L $(ACE_ROOT)/ace -L ./ ${FSU_PTHREADS_DIR}/init/init.o # -z muldefs -# LDLIBS += -L $(ACE_ROOT)/ace -L ./ ${FSU_PTHREADS_DIR}/init/init.o -lACE # -z muldefs -LDLIBS += -L $(ACE_ROOT)/ace # -z muldefs -CXX = CC -CFLAGS += -belf -CCFLAGS += +.cpp +d -Dvolatile= -belf -Kpic -pts -I ${FSU_PTHREADS_DIR}/include -DCFLAGS += -g -DCCFLAGS += $(DCFLAGS) -DLD = $(CXX) -LD = $(CXX) /usr/lib/libc.so.1 -#LD = $(CXX) -LIBS = -lm -L${FSU_PTHREADS_DIR}/lib -lgthreads -lnsl -lsocket -lgthreads -OCFLAGS += -O2 -OCCFLAGS += $(OCFLAGS) -PIC = -fPIC -AR = ar -ARFLAGS = ruv -RANLIB = /bin/true - -SOFLAGS = $(CPPFLAGS) -melf -fPIC -G -SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.so $< -# SOLINK = $(SOLINK.cc) -o $@ $(LDFLAGS) $< -PRELIB = @true diff --git a/include/makeinclude/platform_sco5.0.0-fsu-pthread.GNU b/include/makeinclude/platform_sco5.0.0-fsu-pthread.GNU deleted file mode 100644 index da2331d139a..00000000000 --- a/include/makeinclude/platform_sco5.0.0-fsu-pthread.GNU +++ /dev/null @@ -1,36 +0,0 @@ -# $Id$ -# -# Note 1: the above file from ACE 4.6 has been modified by Mike P. to get -# rid of thread related stuff until we can obtain fsu-threads library. -# -# Note 2: You must setup FSU_PTHREADS_DIR environment var to your FSU -# pthreads directory. - -# Requires gcc 2.7.2 Skunkware 97 -# to produce libACE.so correctly changed the specs file for gcc 2.7.2 -# for not link -lc and -lgcc and other not shared libraries - -debug = 1 -optimize = 1 - -CC = gcc -# for no threads -LDLIBS += -lm -L $(ACE_ROOT)/ace -CXX = g++ -CFLAGS += -melf -w -CCFLAGS += -melf -fno-implicit-templates -# -g option not supported for C++ on systems using the DWARF debugging format -#DCFLAGS += -g -DCCFLAGS += $(DCFLAGS) -DLD = $(CXX) -LD = $(CXX) /usr/lib/libc.so.1 -LIBS = -lnsl -lsocket -OCCFLAGS += $(OCFLAGS) -PIC = -fPIC -AR = ar -ARFLAGS = ruv -RANLIB = /bin/true - -SOFLAGS = $(CPPFLAGS) -melf -fPIC -G -SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.so $< -PRELIB = @true diff --git a/include/makeinclude/platform_sco5.0.0-mit-pthread.GNU b/include/makeinclude/platform_sco5.0.0-mit-pthread.GNU deleted file mode 100644 index f43397bf5ed..00000000000 --- a/include/makeinclude/platform_sco5.0.0-mit-pthread.GNU +++ /dev/null @@ -1,35 +0,0 @@ -# $Id$ - -# Requires MIT pthreads and gcc 2.7.2 installed in /usr/progressive -# to produce libACE.so correctly changed the specs file for gcc 2.7.2 -# for not link -lc and -lgcc and other not shared libraries - -debug = 1 -optimize = 1 - -CC = gcc -# for threads -# for no threads -#CXX = gcc -fno-implicit-templates -w -fno-strict-prototypes -# LDFLAGS += -L $(ACE_ROOT)/ace -L ./ ${MIT_PTHREADS_DIR}/init/init.o # -z muldefs -# LDLIBS += -L $(ACE_ROOT)/ace -L ./ ${MIT_PTHREADS_DIR}/init/init.o -lACE # -z muldefs -LDLIBS += -L $(ACE_ROOT)/ace -L ./ -lACE # -z muldefs -CXX = g++ -CFLAGS += -melf -w -CCFLAGS += -melf -fPIC -Xpg4plus -fno-implicit-templates -I ${MIT_PTHREADS_DIR}/include -I /usr/progressive/lib/g++-include -DCFLAGS += -gstabs -DCCFLAGS += $(DCFLAGS) -DLD = $(CXX) -LD = $(CXX) -LIBS = -L${MIT_PTHREADS_DIR} -lnsl -lpthread -OCFLAGS += -O2 -OCCFLAGS += $(OCFLAGS) -PIC = -fPIC -AR = ar -ARFLAGS = ruv -RANLIB = /bin/true - -SOFLAGS = $(CPPFLAGS) -melf -fPIC -G -SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.so $< -# SOLINK = $(SOLINK.cc) -o $@ $(LDFLAGS) $< -PRELIB = @true diff --git a/include/makeinclude/platform_sco5.0.0-nothread.GNU b/include/makeinclude/platform_sco5.0.0-nothread.GNU deleted file mode 100644 index 6267de6e682..00000000000 --- a/include/makeinclude/platform_sco5.0.0-nothread.GNU +++ /dev/null @@ -1,33 +0,0 @@ -# $Id$ -# -# NOTE: the above file from ACE 4.6 has been modified by Mike P. to get rid of -# thread related stuff until we can obtain fsu-threads library. - -# Requires gcc 2.7.2 Skunkware 97 -# to produce libACE.so correctly changed the specs file for gcc 2.7.2 -# for not link -lc and -lgcc and other not shared libraries - -debug = 1 -optimize = 1 - -CC = gcc -# for no threads -LDLIBS += -lm -L $(ACE_ROOT)/ace -CXX = g++ -CFLAGS += -melf -w -CCFLAGS += -melf -fno-implicit-templates -# -g option not supported for C++ on systems using the DWARF debugging format -#DCFLAGS += -g -DCCFLAGS += $(DCFLAGS) -DLD = $(CXX) -LD = $(CXX) /usr/lib/libc.so.1 -LIBS = -lnsl -lsocket -OCCFLAGS += $(OCFLAGS) -PIC = -fPIC -AR = ar -ARFLAGS = ruv -RANLIB = /bin/true - -SOFLAGS = $(CPPFLAGS) -melf -fPIC -G -SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.so $< -PRELIB = @true diff --git a/include/makeinclude/platform_sunos4_g++.GNU b/include/makeinclude/platform_sunos4_g++.GNU deleted file mode 100644 index 35c3f8f61b9..00000000000 --- a/include/makeinclude/platform_sunos4_g++.GNU +++ /dev/null @@ -1,26 +0,0 @@ -# $Id$ - -# SunOS 4.x (Solaris 1.x) with g++ *not* using Orbix - -debug = 1 -optimize = 1 - -CC = gcc -CXX = g++ -CFLAGS += -fno-strict-prototypes -CCFLAGS += $(CFLAGS) -fno-implicit-templates -DCFLAGS += -g -DLD = /bin/ld -LD = $(CXX) -# -# for G++ v2.6.0 -OCFLAGS += -O2 -PIC = -fpic -AR = ar -ARFLAGS = ruv -RANLIB = ranlib -SOFLAGS = -assert pure-text -# SOBUILD - compile into .so directly -SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.so $< -# SOLINK = $(SOLINK.cc) -o $@ $(LDFLAGS) $< -PRELIB = @true diff --git a/include/makeinclude/platform_sunos4_lucid.GNU b/include/makeinclude/platform_sunos4_lucid.GNU deleted file mode 100644 index a6efedcf796..00000000000 --- a/include/makeinclude/platform_sunos4_lucid.GNU +++ /dev/null @@ -1,21 +0,0 @@ -# $Id$ - -# SunOS 4.x (Solaris 1.x) with Lucid - -debug = 1 - -CC = lcc -CXX = lcc -CFLAGS = -Xa # use ANSI c complier -CCFLAGS = -XF -Xpt- # use c++ ARM compiler with auto templates turned off -DCFLAGS += -g -DCCFLAGS += $(DCFLAGS) -DLD = /bin/ld -LD = $(CXX) -LIBS += -PIC = -pic -ARFLAGS = ruv -RANLIB = ranlib -SOFLAGS = -assert pure-text -SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.o $<; \ - $(SOLINK.cc) -o $@ $(LDFLAGS) $(VSHDIR)$*.o diff --git a/include/makeinclude/platform_sunos4_sunc++3.x.GNU b/include/makeinclude/platform_sunos4_sunc++3.x.GNU deleted file mode 100644 index a00eb562e11..00000000000 --- a/include/makeinclude/platform_sunos4_sunc++3.x.GNU +++ /dev/null @@ -1,27 +0,0 @@ -# $Id$ - -# SunOS 4.x (Solaris 1.x) with SunC++ 3.x (note that this is a very old C++ -# compiler, based on cfront. In paricular, it's not the same thing as -# SunC++ 4.x (which is also known as SPARCWorks 3.x). - -debug = 1 - -CC = cc -CXX = CC -CCFLAGS += $(CFLAGS) -DCFLAGS += -g -DLD = /bin/ld -LD = $(CXX) -LIBS += -PIC = -pic -AR = ar -ARFLAGS = ruv -RANLIB = ranlib -SOFLAGS = -assert pure-text -SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.o $<; \ - $(RM) -rf $(VSHDIR)pt$*; mkdir $(VSHDIR)pt$*; \ - YYZ="`$(CXX) $(CCFLAGS) $(CPPFLAGS) \ - -ptr$(VSHDIR)pt$* -ptr./ptrepository $<`"; \ - $(RM) -rf a.out; \ - YYZ="`echo $(VSHDIR)pt$*/*.o`"; \ - $(SOLINK.cc) -o $@ ./$(VSHDIR)$*.o $(YYZ) diff --git a/include/makeinclude/platform_sunos4_sunc++4.x.GNU b/include/makeinclude/platform_sunos4_sunc++4.x.GNU deleted file mode 100644 index b122a76859f..00000000000 --- a/include/makeinclude/platform_sunos4_sunc++4.x.GNU +++ /dev/null @@ -1,24 +0,0 @@ -# $Id$ - -# SunOS 4.x (Solaris 1.x) with SunC++ 4.x - -debug = 1 - -CC = cc -CXX = CC -CCFLAGS += $(CFLAGS) -DCFLAGS += -g -DLD = $(CXX) -LD = $(CXX) -LIBS += -LDFLAGS += $(PIC) -AR = CC -ARFLAGS = -xar -o -PIC = -PIC -RANLIB = ranlib -SOFLAGS = -G $(CPPFLAGS) -SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.o $<; \ - $(SOLINK.cc) $(PIC) -o $@ $(LDFLAGS) $(VSHDIR)$*.o - -#### Create template repository to avoid compiler warning. -TEMPLATE_REPOSITORY = Templates.DB diff --git a/include/makeinclude/platform_sunos4_sunc++4.x_orbix.GNU b/include/makeinclude/platform_sunos4_sunc++4.x_orbix.GNU deleted file mode 100644 index fec612a3113..00000000000 --- a/include/makeinclude/platform_sunos4_sunc++4.x_orbix.GNU +++ /dev/null @@ -1,25 +0,0 @@ -# $Id$ - -# SunOS 4.x (Solaris 1.x) with SunC++ 4.x and Orbix. - -debug = 1 - -CC = cc -CXX = CC -CCFLAGS += $(CFLAGS) -DCFLAGS += -g -DLD = $(CXX) -LD = $(CXX) -LIBS += -INCLDIRS = -I$(ORBIX_ROOT)/include -AR = CC -LDFLAGS += -L$(ORBIX_ROOT)/lib -ARFLAGS = -xar -o -PIC = -pic -RANLIB = ranlib -SOFLAGS = -G $(CPPFLAGS) -SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.o $<; \ - $(SOLINK.cc) -o $@ $(LDFLAGS) $(VSHDIR)$*.o - -#### Create template repository to avoid compiler warning. -TEMPLATE_REPOSITORY = Templates.DB diff --git a/include/makeinclude/platform_sunos5.6_sparc_sunc++_4.2.GNU b/include/makeinclude/platform_sunos5.6_sparc_sunc++_4.2.GNU deleted file mode 100644 index a4241e53d48..00000000000 --- a/include/makeinclude/platform_sunos5.6_sparc_sunc++_4.2.GNU +++ /dev/null @@ -1,3 +0,0 @@ -# $Id$ - -include $(ACE_ROOT)/include/makeinclude/platform_sunos5_sunc++.GNU diff --git a/include/makeinclude/platform_sunos5_centerline.GNU b/include/makeinclude/platform_sunos5_centerline.GNU deleted file mode 100644 index 0d8cc04c666..00000000000 --- a/include/makeinclude/platform_sunos5_centerline.GNU +++ /dev/null @@ -1,22 +0,0 @@ -# $Id$ - -# SunOS 5.x (Solaris 2.x) with Centerline C++ - -debug = 1 - -CC = cc -CXX = CC -CFLAGS += -mt -CCFLAGS += $(CFLAGS) -DCFLAGS += -g -DLD = $(CXX) -mt -LD = $(CXX) -mt -LIBS += -lsocket -ldl -lnsl -lgen -PIC = -PIC -#AR = CC -#ARFLAGS = -xar -o -ARFLAGS = ruv -RANLIB = echo -SOFLAGS = -G $(CPPFLAGS) $(PTDIRS) -SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.o $<; \ - $(SOLINK.cc) $(PIC) -o $@ $(LDFLAGS) $(VSHDIR)$*.o diff --git a/include/makeinclude/platform_sunos5_centerline_orbix.GNU b/include/makeinclude/platform_sunos5_centerline_orbix.GNU deleted file mode 100644 index 7265e806673..00000000000 --- a/include/makeinclude/platform_sunos5_centerline_orbix.GNU +++ /dev/null @@ -1,23 +0,0 @@ -# $Id$ - -# SunOS 5.x (Solaris 2.x) with Centerline C++ - -debug = 1 - -CC = cc -CXX = CC -CFLAGS += -mt -CCFLAGS += $(CFLAGS) -DCFLAGS += -g -DLD = $(CXX) -mt -LD = $(CXX) -mt -INCLDIRS = -I$(ORBIX_ROOT)/include -LDFLAGS += -L$(ORBIX_ROOT)/lib -LIBS += -lITsrv -lsocket -ldl -lnsl -lgen -PIC = -PIC -AR = CC -ARFLAGS = -xar -o -RANLIB = echo -SOFLAGS = -G $(CPPFLAGS) $(PTDIRS) -SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.o $<; \ - $(SOLINK.cc) $(PIC) -o $@ $(LDFLAGS) $(VSHDIR)$*.o diff --git a/include/makeinclude/platform_sunos5_egcs.GNU b/include/makeinclude/platform_sunos5_egcs.GNU deleted file mode 100644 index c4db24633d4..00000000000 --- a/include/makeinclude/platform_sunos5_egcs.GNU +++ /dev/null @@ -1,13 +0,0 @@ -# $Id$ - -# SunOS 5.x (Solaris 2.x) with egcs -# Use the g++ platform file, with any overrides following its include. - -include $(ACE_ROOT)/include/makeinclude/platform_sunos5_g++.GNU - -# This is recommeded by Cygnus in their egcs-1.0 Caveats page. -# http://egcs.cygnus.com/caveats.html -CFLAGS += -Wno-return-type - -#### Uncomment the following line to use shared libstdc++.so, etc. -#### SOFLAGS = -shared $(CPPFLAGS) diff --git a/include/makeinclude/platform_sunos5_g++.GNU b/include/makeinclude/platform_sunos5_g++.GNU deleted file mode 100644 index 6193bbe8885..00000000000 --- a/include/makeinclude/platform_sunos5_g++.GNU +++ /dev/null @@ -1,49 +0,0 @@ -# $Id$ - -# SunOS 5.x (Solaris 2.x) with g++ *not* using Orbix - -# NOTE: with g++ 2.8.0, you'll need to disable optimization in order to -# instantiate ACE_Map_Manager (ace/Map_Manager.cpp). The easiest -# way to do that is to set "optimize = 0", either below or on -# your make command line. - -# NOTE: On Solaris86, you'll need to use GNU as instead of /usr/ccs/bin/as, -# if you want -gstabs+ and -pipe support. - -ifeq (,$(debug)) - debug = 1 -endif -ifeq (,$(optimize)) - optimize = 1 -endif -ifeq (,$(threads)) - threads = 1 -endif - -ifeq ($(threads),0) - CFLAGS += -DACE_MT_SAFE=0 -endif # threads - -ifeq ($(shell /bin/uname -m),i86pc) - #### gcc on Solaris86 doesn't use -g - DCFLAGS += -gstabs+ -else # ! i86pc - DCFLAGS += -g -endif # ! i86pc - -CC = gcc -CXX = g++ -CFLAGS += -W -Wall -Wpointer-arith -pipe #### -Winline -CCFLAGS += $(CFLAGS) -fno-implicit-templates -DLD = $(CXX) -LD = $(CXX) -LDFLAGS += -LIBS += -lsocket -ldl -lgen -lnsl -lposix4 -lthread -OCFLAGS += -O2 -PIC = -fPIC -AR = ar -ARFLAGS = ruv -RANLIB = @true -SOFLAGS = -G $(CPPFLAGS) -SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.so $< -PRELIB = @true diff --git a/include/makeinclude/platform_sunos5_ghs.GNU b/include/makeinclude/platform_sunos5_ghs.GNU deleted file mode 100644 index 8d285c0d54c..00000000000 --- a/include/makeinclude/platform_sunos5_ghs.GNU +++ /dev/null @@ -1,38 +0,0 @@ -# $Id$ - -# SunOS 5.x (Solaris 2.x) with GreenHills compiler. - -debug = 1 -exceptions = -optimize = 1 -threads = 1 - -CC = gcx -CXX = $(CC) -CCFLAGS += $(CFLAGS) --no_rtti -tnone -DCFLAGS += -g -DLD = $(CXX) -LD = $(CXX) -LDFLAGS = --no_auto_instantiation -LIBS += -lsocket -ldl -lgen -lnsl -lposix4 -OCFLAGS += -OL -OM -PIC = -PIC -RANLIB = @true -AR = $(CC) $(LDFLAGS) -ARFLAGS = -archive -o -RANLIB = @true -SOFLAGS = -shared - -ifeq ($(threads),1) - #### Don't use g7 register with threading. - CFLAGS += -Xleaveg7 - LIBS += -lthread -else # ! threads - CFLAGS += -DACE_MT_SAFE=0 -endif # ! threads - -ifdef exceptions - CCFLAGS += --exceptions -else # ! exceptions - CCFLAGS += --no_exceptions -endif # ! exceptions diff --git a/include/makeinclude/platform_sunos5_kcc.GNU b/include/makeinclude/platform_sunos5_kcc.GNU deleted file mode 100644 index 65c66bfd88f..00000000000 --- a/include/makeinclude/platform_sunos5_kcc.GNU +++ /dev/null @@ -1,74 +0,0 @@ -# $Id$ -*- Makefile -*- - -# SunOS 5.x (Solaris 2.x) with KAI C++ 3.3e, *not* using Orbix. -# - -debug = 1 -distrib = 0 -threads = 1 - -ifeq ($(threads),1) - CFLAGS += --thread_safe - LDFLAGS += --thread_safe -endif # threads - -CC = KCC -CXX = KCC - -DCFLAGS += -g -DLD = $(CXX) - -ifneq ($exceptions,0) - CCFLAGS += --exceptions -endif # ! exceptions - -LD = $(CXX) - -LIBS += -lsocket -ldl -lnsl -lgen -lposix4 - -CPPFLAGS += $(CFLAGS) -OCFLAGS += -K2 -PIC = -KPIC -AR = ar -ARFLAGS = -xar -o -RANLIB = echo -SOFLAGS = -G $(CPPFLAGS) - -#### Create template repository to avoid compiler warning. -TEMPLATE_REPOSITORY = Templates.DB - -ifdef BIN - #### Builds .shobj/$*.o file, then .shobj/$*.so file. The .o files - #### are used for building libraries and executables. But, it seems - #### to be necessary to build the .so files (with -G) in order to get - #### all template instantiations. - SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.o $<; \ - $(SOLINK.cc) -o $@ -h $@ $(LDFLAGS) $(VSHDIR)$*.o -else - #### Optimize builds when no executables are built in the current - #### directory. Only a library is being created, and -G is used - #### in that step. Therefore, all templates instantations are - #### included in the library. This optimization saves almost 11 Mb - #### (2.6 percent) and 27 minutes (22 percent) on the entire ACE - #### build on a 168 MHz Sun Ultra2. - #### - #### Sun C++ won't allow the output from a compile to be named with - #### a .so extension. Rather than muck with the ACE build rules and - #### risk upsetting builds on other platforms, just ln the output - #### after building it. - SOBUILD = $(RM) $@; $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.o $< && \ - /bin/ln $(VSHDIR)$*.o $@ -endif # BIN - -#### The following macro overrides enable creation of fast executables. -#### They _don't_ support fast compilation :-) -#### To use, add fast=1 to your "make" invocation. -#### -#### -g is incompatible with -fast. If you need -g, you can -#### use "-fast -O3". -#### -ifdef fast - CFLAGS += -fast +K3 - DCFLAGS = - LDFLAGS += -fast +K3 -endif # fast diff --git a/include/makeinclude/platform_sunos5_sunc++.GNU b/include/makeinclude/platform_sunos5_sunc++.GNU deleted file mode 100644 index f551c5d9814..00000000000 --- a/include/makeinclude/platform_sunos5_sunc++.GNU +++ /dev/null @@ -1,166 +0,0 @@ -# $Id$ - -# SunOS 5.x (Solaris 2.x) with Sun C++ 4.2 and 5.x, *not* using Orbix. -# -# NOTE: Sun C++ 5.0 users might need to add this to their CCFLAGS: -# -compat=4 and/or remove -instances=explicit. Please note that -# inlining is disabled by default with Sun C++ 5.0. If you'd like -# to try enabling it, comment out the "inline = 0" line below. -# -# With slight modification, this file could be used with Sun C++ 4.1. -# However, it's likely that you won't be able to build all of ACE -# with Sun C++ 4.1. -# -# NOTE: some ACE files might generate this warning: -# "Warning: Could not find source for " one of the following: -# default constructor, copy constructor, destructor, or assignment -# operator. It appears that with +w, Sun C++ 4.x issues this warning -# whenever it has to generate one of these functions (because it wasn't -# defined by the user). This isn't really a problem. -# This warning appears to be fixed by Sun C++ 4.2 jumbo patch 104631-02. -# -# -pta instantiates all template members, which makes libraries bigger. -# But, it's supposed to put each member into it's own .o, so executable -# size should not be penalized. We don't use it because it's not -# necessary with automatic template instantiation. - -ifeq (,$(debug)) - debug = 1 -endif -ifeq (,$(distrib)) - distrib = 0 -endif -ifeq (,$(threads)) - threads = 1 -endif - -tk_reactor = 0 -ace_with_x11 = 0 - -PLATFORM_TK_CPPFLAGS= -PLATFORM_TK_LIBS=-ltk -ltcl -PLATFORM_TK_LDFLAGS= - -PLATFORM_X11_CPPFLAGS= -PLATFORM_X11_LIBS =-lX11 -PLATFORM_X11_LDFLAGS= - -ifeq ($(threads),1) - CFLAGS += -mt - LDFLAGS += -mt -endif # threads - -CC = cc -CXX = CC - -CC_VERSION = $(shell CC -V 2>&1) - -ifeq (Compilers 4.2,$(findstring Compilers 4.2,$(CC_VERSION))) - #### CC 4.2, only, supports -features=castop - CCFLAGS += $(CFLAGS) -features=castop - - #### RTTI can coexist with ACE, but it doesn't use it. To enable, - #### add rtti=1 to your make invocation. Sun C++ 4.2, only, supports - #### this option. - ifdef rtti - CCFLAGS += -features=rtti - else # ! rtti - #### ACE_LACKS_RTTI is necessary with -features=castop, but - #### without -features=rtti, to convert dynamic_cast to static_cast. - CCFLAGS += -DACE_LACKS_RTTI - endif # ! rtti - - #### Create template repository to avoid compiler warning. - TEMPLATE_REPOSITORY = Templates.DB -else # ! 4.2 -ifeq (Compilers 5,$(findstring Compilers 5,$(CC_VERSION))) - #### CC 5.0 or later - #### Inlining appears to cause link problems with early releases of - #### CC 5.0. - inline = 0 - #### Support RTTI by default. And, use explicit template instantiation - #### because automatic instantiation appears to be broken, at least - #### with early releases of CC 5.0. And, use old iostreams. - CCFLAGS += $(CFLAGS) -library=iostream,no%Cstd -instances=explicit -endif # CC 5.0 or later -endif # ! 4.2 - -DCFLAGS += -g -DLD = $(CXX) - - -#### Exception handling breaks on MP machines prior to Sun C++ 4.2 -#### with jumbo patch 104631-02, see ace/config-sunos5.5.h. -#### If you are using a version of Sun C++ prior to 4,2, or haven't -#### applied that jumbo patch to your 4.2, or don't want to pay the -#### performance penalty of exception handling, then use the default -#### of no exceptions. If you want to enable exception handling, -#### add "exceptions=1" to your "make" invocation. -ifndef exceptions - CCFLAGS += -noex -endif # ! exceptions - -LD = $(CXX) - -ifdef orbix - LDFLAGS += $(PIC) -L$(ORBIX_ROOT)/corba2/lib \ - -R $(ACE_ROOT)/ace -R./ -R $(ORBIX_ROOT)/corba2/lib -ifeq ($(mt_orbix),1) - LIBS += -lITinimt -liiopmt -lorbixmt -lthread -else - LIBS += -lITini -liiop -lorbix -endif - - LIBS += -lsocket -ldl -lnsl -lgen -lposix4 - CPPFLAGS += -I$(ORBIX_ROOT)/corba2/include -else -ifeq ($(distrib),0) - LDFLAGS += -R $(ACE_ROOT)/ace -R./ -endif - LIBS += -lsocket -ldl -lnsl -lgen -lposix4 -endif # orbix - -LDFLAGS += -xildoff - -OCFLAGS += -O -PIC = -PIC -AR = CC -ARFLAGS = -xar -o -RANLIB = echo -SOFLAGS = -G $(CPPFLAGS) - -ifdef BIN - #### Builds .shobj/$*.o file, then .shobj/$*.so file. The .o files - #### are used for building libraries and executables. But, it seems - #### to be necessary to build the .so files (with -G) in order to get - #### all template instantiations. - SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.o $<; \ - $(SOLINK.cc) -o $@ -h $@ $(LDFLAGS) $(VSHDIR)$*.o -else - #### Optimize builds when no executables are built in the current - #### directory. Only a library is being created, and -G is used - #### in that step. Therefore, all templates instantations are - #### included in the library. This optimization saves almost 11 Mb - #### (2.6 percent) and 27 minutes (22 percent) on the entire ACE - #### build on a 168 MHz Sun Ultra2. - #### - #### Sun C++ won't allow the output from a compile to be named with - #### a .so extension. Rather than muck with the ACE build rules and - #### risk upsetting builds on other platforms, just ln the output - #### after building it. - SOBUILD = $(RM) $@; $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.o $< && \ - /bin/ln $(VSHDIR)$*.o $@ -endif # BIN - -#### The following macro overrides enable creation of fast executables. -#### They _don't_ support fast compilation :-) -#### To use, add fast=1 to your "make" invocation. -#### -#### -g is incompatible with -fast. If you need -g, you can -#### use "-fast -O3". -#### -ifdef fast - CFLAGS += -fast - DCFLAGS = - LDFLAGS += -fast -endif # fast diff --git a/include/makeinclude/platform_sunos5_sunc++_orbix.GNU b/include/makeinclude/platform_sunos5_sunc++_orbix.GNU deleted file mode 100644 index 001576f06f1..00000000000 --- a/include/makeinclude/platform_sunos5_sunc++_orbix.GNU +++ /dev/null @@ -1,7 +0,0 @@ -# $Id$ - -orbix=1 -mt_orbix=1 -exceptions=1 - -include $(ACE_ROOT)/include/makeinclude/platform_sunos5_sunc++.GNU diff --git a/include/makeinclude/platform_tandem.GNU b/include/makeinclude/platform_tandem.GNU deleted file mode 100644 index 294525c4e82..00000000000 --- a/include/makeinclude/platform_tandem.GNU +++ /dev/null @@ -1,93 +0,0 @@ -# $Id$ - -# NonStop-UX NCC 3.20 - -debug = 1 - -# Please see the config-NonS... file for more information about status -# This file is built from Sunos5(os) and sgic++(compiler) - -CC = cc -CXX = NCC -DLD = $(CXX) -LD = $(CXX) -CPPFLAGS += -no_exceptions -CPPFLAGS += -I/usr/include3.18 -CPPFLAGS += -D_REENTRANT -#CPPFLAGS += -ptused -prelink -CPPFLAGS += -pta -#CPPFLAGS += +pp -#CPPFLAGS += -show -#-D_SGI_MP_SOURCE -#3106 nested comment is not allowed -#3203 statement is unreachable -#3252 argument of type "X" is incompatible with parameter of type "Y" -#3262 Parameter "X" declared and never referenced -#3611 a value of "X" cannot be assigned to an entity of type "Y" -#3140 macro redefined differently (param redefines NULL) - -CPPFLAGS += -woff 3106,3203,3262 -#CPPFLAGS += -woff 3106,3203,3262,3611,3252 -#CPPFLAGS += -woff 3106,3203,3212,3252,3262,3611 - -# For the new 32 bit C++ compiler (-n32) -#CPPFLAGS += -n32 -woff 1174,1209,1375,1506,1110,1552,1021,1171 -# For the old C++ compiler (-32) -#CPPFLAGS += +pp -LDFLAGS += -rpath "$(ACE_ROOT)/ace" -#LDFLAGS += -Wl,-woff,85 -LIBS += -lsocket -LIBS += -ldl -LIBS += -lnsl -LIBS += -lgen -LIBS += -lthread -PIC = -KPIC -AR = ar -ARFLAGS = r -RANLIB = echo -SOFLAGS = -shared $(CPPFLAGS) -all -SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.o $<; \ - $(SOLINK.cc) -o $@ $(LDFLAGS) $(VSHDIR)$*.o - -#3106 nested comment is not allowed -#3203 statement is unreachable -#3252 argument of type "X" is incompatible with parameter of type "Y" -#3262 Parameter declared and never referenced -#3611 a value of "X" cannot be assigned to an entity of type "Y" -#WARNOFF += -woff 3106,3203,3262,3611 -#INCDIR += -I/usr/include -I/usr/include3.18 -# -I /usr/ucbinclude -#### No threads -#CCFLAGS += -no_exceptions -pta $(WARNOFF) $(INCDIR) -#### Threads -#CCFLAGS += -D_REENTRANT -no_exceptions -pta $(WARNOFF) - -#DLD = $(CXX) -#LD = $(CXX) -#LDFLAGS += -R $(ACE_ROOT)/ace -#LIBS += -lsocket -ldl -lnsl -lgen -lthread # Threads -#LIBS += -lsocket -ldl -lnsl -lgen # No threads -#PIC = -PIC -# SUNC++ 4.1 has a bug with the -xar command: -# -# from 'CC -readme' the following bug is reported: -# -# 4. Using -xar to add generated templates -# ---------------------------------------- -# -# When using -xar to add generated templates to an archive, -# please be aware that this command will both update -# existing object files in the archive, and add new ones. -# Existing object files that may be obsolete will still -# be present. In these cases, the safest course of action -# would be to delete the .a file prior to the invocation of -xar. -# -# so here we remove the archive prior to making the new one -# -#AR = CC -#ARFLAGS = -xar -o -#RANLIB = echo -#SOFLAGS = -G $(CPPFLAGS) -#SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.o $<; \ - $(SOLINK.cc) -o $@ -h $@ $(LDFLAGS) $(VSHDIR)$*.o - diff --git a/include/makeinclude/platform_tru64_cxx.GNU b/include/makeinclude/platform_tru64_cxx.GNU deleted file mode 100644 index 285499f3454..00000000000 --- a/include/makeinclude/platform_tru64_cxx.GNU +++ /dev/null @@ -1,30 +0,0 @@ -# $Id$ - -# This platform macros file is intended to work with -# Digital UNIX using the cxx compiler. - -ifndef ACE_DU_VERSION - ACE_DU_VERSION := $(shell uname -r) -endif # ACE_DU_VERSION - -ifeq (3.,$(findstring 3.,$(ACE_DU_VERSION))) - include $(ACE_ROOT)/include/makeinclude/platform_osf1_3.2.GNU - -else # ! 3.x -ifeq (4.,$(findstring 4.,$(ACE_DU_VERSION))) - include $(ACE_ROOT)/include/makeinclude/platform_osf1_4.0.GNU - CFLAGS += -DDIGITAL_UNIX=4 - ifneq ($(CXX_VER),CXX_5) - # 9: nested comment not allowed. But there's one in /usr/include/pdsc.h! - WARNING_FLAGS += -msg_disable 9 - endif # 6.0 or later - -else # ! 4.x -ifeq (5.,$(findstring 5.,$(ACE_DU_VERSION))) - include $(ACE_ROOT)/include/makeinclude/platform_osf1_4.0.GNU - CFLAGS += -DDIGITAL_UNIX=5 - SOFLAGS = -shared -use_ld_input $(ACELIB) - -endif # 5.x -endif # ! 4.x -endif # ! 3.x diff --git a/include/makeinclude/platform_unixware_g++.GNU b/include/makeinclude/platform_unixware_g++.GNU deleted file mode 100644 index e5e76d03a98..00000000000 --- a/include/makeinclude/platform_unixware_g++.GNU +++ /dev/null @@ -1,24 +0,0 @@ -# $Id$ - -# UnixWare V2.2.1.2 with g++ version 2.7.2.2 *not* using Orbix - -debug = 1 - -CC = gcc -CXX = g++ -CFLAGS += -D__STDC__=0 -CCFLAGS += $(CFLAGS) -fno-implicit-templates -DCFLAGS += -g -DLD = $(CXX) -LD = $(CXX) -LIBS += -lsocket -lnsl -lgen -lthread -PIC = -fpic -AR = ar -ARFLAGS = ruv -RANLIB = /bin/true -#SOFLAGS = -assert pure-text -SOFLAGS = -shared -# SOBUILD - compile into .so directly -SOBUILD = $(COMPILE.cc) $(PIC) -o $(VSHDIR)$*.so $< -# SOLINK = $(SOLINK.cc) -o $@ $(LDFLAGS) $< -PRELIB = @true diff --git a/include/makeinclude/platform_vxworks5.x_g++.GNU b/include/makeinclude/platform_vxworks5.x_g++.GNU deleted file mode 100644 index 576db8f0a58..00000000000 --- a/include/makeinclude/platform_vxworks5.x_g++.GNU +++ /dev/null @@ -1,172 +0,0 @@ -# $Id$ -# VxWorks 5.2-5.3.1 with GNU g++ 2.7.2 - -#### Notes: -#### 1) This file requires that the WIND_BASE and WIND_HOST_TYPE environment -#### variables be set. If the target CPU is not a PPC604, then your CPU -#### environment variable must be set. If perl is not on your path, -#### you'll also need to set your PERL_PATH environment variable to -#### the full path to perl. -#### 2) If you have problems with munch output not being compilable -#### because it contains identifiers with ".", e.g., ".cpp", in them: -#### add a global variable or function to that .cpp file. See -#### ace/IOStream_T.cpp for an explanation and example. - -VXWORKS = 1 -CROSS-COMPILE = 1 - -debug = 1 -optimize = 1 -rtti = -shared_libs = -static_libs = 1 - - -ifeq (,$(WIND_BASE)) - default: - @ERROR: you must set your WIND_BASE environment variable -endif # WIND_BASE - -ifeq (,$(WIND_HOST_TYPE)) - default: - @ERROR: you must set your WIND_HOST_TYPE environment variable -endif # WIND_HOST_TYPE - -HOST_DIR = $(WIND_BASE)/host/$(WIND_HOST_TYPE) - -ifeq (,$(findstring $(HOST_DIR)/bin,$PATH)) - #### Use := instead of += because += inserts a space. - PATH := $(PATH):$(HOST_DIR)/bin -endif # PATH - -PERL_PATH = perl - -ifeq (win32,$(findstring win32,$(WIND_HOST_TYPE))) - #### GNU make on WIN32 needs quoted double quotes. - ACE_QUOTE ='"' -else # ! win32 host - ACE_QUOTE =" -endif # ! win32 host - - -#### BEGIN target CPU-specific settings - - -#### This is kind of messy so that it can support multiple targets. -#### You'll need to set CPU to a supported CPU using one of these -#### methods (unless your CPU is a PowerPC 604): -#### 1) create a $ACE_ROOT/include/makeinclude/platform_macros.GNU -#### that contains something like: -#### -#### WIND_BASE = /project/doc/pkg/wind -#### WIND_HOST_TYPE = sun4-solaris2 -#### CPU = I80486 -#### -#### include $(ACE_ROOT)/include/makeinclude/platform_vxworks5.x_g++.GNU -#### -#### 2) modify the code below to set CPU, or -#### 3) set CPU on the command line, e.g., "make CPU=I80486" -ifeq ($(CPU),) - CPU = PPC604 -endif # default CPU - -ifeq ($(CPU),PPC604) - BINXSYM_NAME = xsym - CFLAGS += -B$(GCCLIB_DIR)/ -DCPU=PPC604 - CCFLAGS += -fno-implicit-templates - GCCLIB_DIR = $(HOST_DIR)/lib/gcc-lib/powerpc-wrs-vxworks/cygnus-2.7.2-960126 - TOOLENV = ppc -else -ifeq ($(CPU),PPC860) - BINXSYM_NAME = xsym - CFLAGS += -B$(GCCLIB_DIR)/ -DCPU=PPC860 -mcpu=860 - CCFLAGS += -fno-implicit-templates - GCCLIB_DIR = $(HOST_DIR)/lib/gcc-lib/powerpc-wrs-vxworks/cygnus-2.7.2-960126 - TOOLENV = ppc -else -ifeq ($(CPU),I80486) - #### Note: -fno-implicit-templates doesn't seem to work well with g++ - #### cygnus-2.7.2-960126 for pc486 target. Some member functions don't - #### get instantiated. Wind River knows about this problem (SPR 8483). - BINXSYM_NAME = xsymDec - CFLAGS += -DCPU=I80486 -m486 - TOOLENV = 386 -else -ifeq ($(CPU),I80386) - BINXSYM_NAME = xsymDec - CFLAGS += -DCPU=I80386 - TOOLENV = 386 -else - BINXSYM_NAME = xsym - CCFLAGS += -fno-implicit-templates -endif # I80386 -endif # I80486 -endif # PPC860 -endif # PPC604 - - -#### END target CPU-specific settings - - -#### Set up Win32 vs. Unix host specific macros. -ifeq ($(WIND_HOST_TYPE),x86-win32) - CXX = cc$(TOOLENV) -else # ! x86-win32 - CXX = g++$(TOOLENV) - PIPE_OPT = -pipe -endif # ! x86-win32 - -ifeq ($(shared_libs),1) - SHARED_LIBS = 1 -endif -ifeq ($(shared_libs_only),1) - SHARED_LIBS = 1 -endif - -ifeq ($(SHARED_LIBS),1) - ACELIB = -L./ - #### There's no difference between non-shared and shared object code. - VSHDIR = .obj/ -endif # shared_libs - -ifeq ($(static_libs),1) - AR = ar$(TOOLENV) - ARFLAGS = rv -else # ! static_libs - AR = echo - ARFLAGS = "build shared lib only" -endif # ! static_libs - -CC = cc$(TOOLENV) -CFLAGS += -D_REENTRANT -ansi -fno-builtin -fno-defer-pop \ - -fvolatile -nostdinc -nostdlib $(PIPE_OPT) -W -Wall -CCFLAGS += $(CFLAGS) -ifeq (,$(rtti)) - #### Don't use RTTI even with egcs, because Tornado 1.0.x libraries - #### don't support it. - CCFLAGS += -fno-rtti -DACE_LACKS_RTTI -endif # rtti -DCFLAGS += -g -DLD = $(LD) -INCLDIRS += -I$(WIND_BASE)/target/h -LD = $(PERL_PATH) $(ACE_ROOT)/bin/ace_ld -c \ - $(ACE_QUOTE)$(COMPILE.c) -traditional$(ACE_QUOTE) \ - -m "munch" -n "nm$(TOOLENV)" ld$(TOOLENV) -LDFLAGS += -X -r -#### WindRiver only recommends -O, not -O2, with some CPUs, including -#### the i386 family. And -O2 causes some compilation failures. -OCFLAGS += -O -PIC = - - -#### ld can't handle INCLDIRS, so override LINK definitions. -LINK.c = override -LINK.c.override = $(LD) $(LDFLAGS) $(LDLIBS) $(LIBS) - -LINK.cc = override -LINK.cc.override = $(LD) - - -#### To extract the symbol table from each executable, uncomment the POSTLINK -#### definition below. -## POSTLINK = ; VX_CPU_FAMILY=$(TOOLENV) $(BINXSYM_NAME) < $@ > $@.sym diff --git a/include/makeinclude/platform_vxworks5.x_ghs.GNU b/include/makeinclude/platform_vxworks5.x_ghs.GNU deleted file mode 100644 index 8628c58480c..00000000000 --- a/include/makeinclude/platform_vxworks5.x_ghs.GNU +++ /dev/null @@ -1,87 +0,0 @@ -# $Id$ -# -# VxWorks 5.2-5.3.1 with Green Hills 1.8.8 and 1.8.9 - -#### Notes: -#### 1) This file requires that your PATH be set to include the location -#### of the Green Hills executables. And, it usually requires that -#### WIND_BASE and WIND_HOST_TYPE be set. -#### -#### 2) If your CPU is not a ppc, you'll need to set your CPU environment -#### variable. -#### -#### 3) You'll probably need to set your GHS environment variable to the -#### location of your Green Hills executables. -#### -#### 4) For x86 target, the ghsblin.o, ghsmath.o, and objghsvx/*.o -#### object files were added to libedgnoe.a using this command: -#### -#### $(WIND_BASE)/host/$(WIND_HOST_TYPE)/bin/ar386 rsv libedgnoe.a \ -#### ghs*.o objghsvx/*.o -#### -#### If you don't do that, you'll have to add the individual .o files -#### to LIBS below. -#### -#### Here's an example platform_macros.GNU file: -#### -#### WIND_BASE = /project/doc/pkg/wind -#### WIND_HOST_TYPE = sun4-solaris2 -#### -#### ifeq (,$(findstring /project/doc/pkg/wind/green,$PATH)) -#### PATH +=:/project/doc/pkg/wind/green -#### endif # PATH -#### -#### CPU = 86 -#### GHS = /project/doc/pkg/wind/green/vx$(CPU) -#### include $(ACE_ROOT)/include/makeinclude/platform_vxworks5.x_ghs.GNU - -VXWORKS = 1 -CROSS-COMPILE = 1 - -debug = 1 -optimize = 1 -shared_libs = -static_libs = 1 - - -#### CPU type -ifndef CPU - CPU = ppc -endif # CPU - -#### Green Hills location, and target-specific definitions. -ifeq ($(CPU),86) - # With GHS' ax, ld386 complains that it can't read the - # archive symbol table. - ifndef GHS - GHS = /project/doc/pkg/wind/green/vx$(CPU) - endif # GHS - AR = $(WIND_BASE)/host/$(WIND_HOST_TYPE)/bin/ar386 - ARFLAGS = rsu - - #### For GHS 1.8.8: - #### LIBS += $(GHS)/libedgnoe.a - - #### For GHS 1.8.9: - LIBS += $(GHS)/libscnoe.a $(GHS)/libsedgnoe.a $(GHS)/liblockinit_sc.o -else -ifeq ($(CPU),ppc) - ifndef GHS - GHS = /appl/newgreen/vx$(CPU)603 - endif # GHS - AR = ax - ARFLAGS = cr - LIBS += $(GHS)/ghsbltin.o $(GHS)/ghsmath.o -endif # ppc -endif # CPU - - -CC = cxvx$(CPU) -CXX = $(CC) -CCFLAGS += $(CFLAGS) --no_rtti -tnone -DCFLAGS += -g -DLD = $(CXX) -LD = $(CXX) -LDFLAGS = --no_auto_instantiation -OCFLAGS += -OL -OM -PIC = diff --git a/include/makeinclude/rules.bin.GNU b/include/makeinclude/rules.bin.GNU deleted file mode 100644 index d3d2d9f2bc9..00000000000 --- a/include/makeinclude/rules.bin.GNU +++ /dev/null @@ -1,27 +0,0 @@ -#---------------------------------------------------------------------------- -# $Id$ -# -# Build binaries -# GNU version -# Requires GNU make -#---------------------------------------------------------------------------- - -ifndef OBJEXT -OBJEXT=o -endif - -VOBJS = $(subst .cpp,.$(OBJEXT),$(foreach file,$(SRC),$(VDIR)$(notdir $(file)))) - -ifeq ($(CHORUSLINK),true) -$(BIN): %: $(VDIR)%.o $(VOBJS) - $(LINK.cc) -o $@.xp.o $^ -u _main -u _premain $(VLDLIBS) $(LDFLAGS)$(POSTLINK) - $(MERGEDIR)/dtool/mkctors $@.xp.o > $@.ct.s - $(CXX) -c $@.ct.s - $(RM) $@.ct.s - $(LD) $(LDOPTIONS) -e _start -o $@ $(MERGEDIR)/lib/crt/crth.u.o $(MERGEDIR)/lib/crt/crt0.o $(MERGEDIR)/lib/crt/crti.o $@.xp.o $@.ct.o $(MERGEDIR)/lib/crt/crtn.o -dn -T $(MERGEDIR)/src/act/slots/act_u.ld - $(RM) $@.xp.o - $(RM) $@.ct.o -else -$(BIN): %: $(VDIR)%.o $(VOBJS) - $(LINK.cc) -o $@ $^ $(LDFLAGS) $(VLDLIBS) $(POSTLINK) -endif diff --git a/include/makeinclude/rules.common.GNU b/include/makeinclude/rules.common.GNU deleted file mode 100644 index c2c1b2d5b33..00000000000 --- a/include/makeinclude/rules.common.GNU +++ /dev/null @@ -1,17 +0,0 @@ -#---------------------------------------------------------------------------- -# $Id$ -# -# Common targets -#---------------------------------------------------------------------------- - -all: all.nested all.local -debug: debug.nested debug.local -profile: profile.nested profile.local -install: install.nested install.local -deinstall: deinstall.nested deinstall.local -clean: clean.nested clean.local -realclean: realclean.nested realclean.local -clobber: clobber.nested clobber.local -depend: depend.nested depend.local -rcs_info: rcs_info.nested rcs_info.local - diff --git a/include/makeinclude/rules.lib.GNU b/include/makeinclude/rules.lib.GNU deleted file mode 100644 index 4af15f05119..00000000000 --- a/include/makeinclude/rules.lib.GNU +++ /dev/null @@ -1,138 +0,0 @@ -#---------------------------------------------------------------------------- -# $Id$ -# -# Build libraries (i.e., contain no binary executables) -# GNU version -# Requires GNU make -#---------------------------------------------------------------------------- - -#---------------------------------------------------------------------------- -# The following targets arrange to build both unshared and shared libraries -#---------------------------------------------------------------------------- - -ifndef OBJEXT - OBJEXT=o -endif - -ifndef SOEXT - SOEXT=so -endif - -VSHLIB = $(SHLIB:%.$(SOEXT)=%$(VAR).$(SOEXT)) -ifdef SHLIBA -VSHLIBA = $(SHLIBA:%.a=%$(VAR).a) -endif - -VLOBJS = $(subst .cpp,.$(OBJEXT),$(foreach file,$(LSRC),$(VDIR)$(notdir $(file)))) - -LSRC += $(LSRC2) -ifdef PRELIB -ifdef PRELIB_USES_OBJ_ONLY - VSHOBJS = $(subst .cpp,.o,$(foreach file,$(LSRC),$(VSHDIR)$(notdir $(file)))) -else # ! PRELIB_USES_OBJ_ONLY - VSHOBJS = $(subst .cpp,.o,$(foreach file,$(LSRC),$(VSHDIR)$(notdir $(file)))) -endif # ! PRELIB_USES_OBJ_ONLY - VSHOBJS1 = $(VSHOBJS) -else # ! PRELIB - VSHOBJS = $(subst .cpp,.o,$(foreach file,$(LSRC),$(VSHDIR)$(notdir $(file)))) - VSHOBJS1 = \ - $(subst .cpp,.o,$(foreach file,$(LSRC),$(VSHDIR)$(notdir $(file)))) -endif # ! PRELIB - -# Comment out for now... -# $(DEFS:%=$(INSINC)/%) \ - -ifdef shared_libs_only - INSTALL += \ - $(VSHLIB:%.$(SOEXT)=$(INSLIB)/%.$(SOEXT)$(ACE_LDSO_Version_Number)) -ifdef SHLIBA - INSTALL += $(VSHLIBA:%=$(INSLIB)/%) -endif -else -ifdef static_libs_only - INSTALL += $(VLIB:%.a=$(INSLIB)/%.a) -else - INSTALL += $(VLIB:%.a=$(INSLIB)/%.a) \ - $(VSHLIB:%.$(SOEXT)=$(INSLIB)/%.$(SOEXT)$(ACE_LDSO_Version_Number)) -ifdef SHLIBA - INSTALL += $(VSHLIBA:%=$(INSLIB)/%) -endif -endif # static_libs_only -endif # shared_libs_only - -ifdef PRELIB -# Unfortunately, gcc has to do a link of all of the objects (during which -# it may decide to recompile some of the objects), before we can safely build -# any libraries or shared objects. Comment this line if no shared -# libraries or objects are used. -# -# I have no idea why this dependency has any effect similar to what is -# described above, so I will comment it out. This eliminates the VERY -# annoying messages from make such as: -# make: Circular .shobj/interp.so <- libcorba.so dependency dropped. -#$(VSHOBJS): $(VSHLIB) -endif - -# Comment these lines out if you want to build both *.a and *.so libraries... -#$(VSHLIB): $(VSHOBJS) -#ifdef PRELIB -# $(PRELIB) -#endif -# $(SOLINK.cc) -o $@ $(LDFLAGS) $(VSHDIR)*.o - -# Uncomment the remaining lines if you want to build both *.a and *.so libraries... -VLIB = $(LIB:%.a=%$(VAR).a) - -$(VLIB): $(VLOBJS) -ifdef PRELIB - $(PRELIB) -endif - $(AR) $(ARFLAGS) $@ $? -ifdef TEMPINCDIR -# This is required to get AIX xlC to instantiate and compile the needed -# templates. - if test -s ./$(TEMPINCDIR)/*.C; \ - then \ - $(LINK.cc) -o dummy $(LDFLAGS) $(ACE_ROOT)/etc/xlc_dummy.cpp $^ $(LIBS); \ - $(RM) dummy; \ - $(AR) $(ARFLAGS) $@ tempinc/*.o; \ - fi -endif - -chmod a+r $@ -ifneq (,$(RANLIB)) - -$(RANLIB) $@ -endif # RANLIB - -# Note that if you don't want to build shared libraries, just remove the $(VSHOBJS) -ifdef SHLIBBUILD -$(VSHLIB): $(VSHOBJS) -else -$(VSHLIB): $(VSHOBJS1) -endif -ifdef PRELIB - $(PRELIB) -endif -ifdef TEMPINCDIR -# This is required to get AIX xlC to instantiate and compile the needed -# templates before building the library. - if test -s ./$(TEMPINCDIR)/*.C; \ - then \ - $(LINK.cc) -o dummy $(LDFLAGS) $(ACE_ROOT)/etc/xlc_dummy.cpp $^ $(LIBS); \ - $(RM) dummy; \ - fi -endif -ifdef SHLIBBUILD - $(SHLIBBUILD) -else - $(SOLINK.cc) -o $@ $(VSHOBJS1) $(TMPL_OBJS) $(LDFLAGS) $(LIBS) - -chmod a+rx $@ -endif - -ifdef SHLIBA -$(SHLIBA): $(VSHLIB) - $(AR) $(ARFLAGS) $@ $? - -chmod a+rx $@ -ifneq (,$(RANLIB)) - -$(RANLIB) $@ -endif # RANLIB -endif diff --git a/include/makeinclude/rules.local.GNU b/include/makeinclude/rules.local.GNU deleted file mode 100644 index 80a9aa29aee..00000000000 --- a/include/makeinclude/rules.local.GNU +++ /dev/null @@ -1,221 +0,0 @@ -#---------------------------------------------------------------------------- -# $Id$ -# -# Local targets -# GNU version -# Requires GNU make -#---------------------------------------------------------------------------- - -ifndef OBJDIRS - OBJDIRS = .obj .shobj # .obj_debug .obj_profile .obj_optimize -endif # OBJDIRS - -#### TEMPLATE_REPOSITORY can be set in individual platform files -#### to create template repository directories. See -#### platform_sunos5_sunc++.GNU for an example. -OBJDIRS += $(TEMPLATE_REPOSITORY) - -all.local: build.objdirs build.local install.local - -#---------------------------------------------------------------------------- -# C/C++ compilation targets -#---------------------------------------------------------------------------- - -build.local: $(BUILD) - -# Set up the suffixes for C++ and IDL. -.SUFFIXES: -.SUFFIXES: .cpp .cc .C .idl $(SUFFIXES) - -ifndef TAO_ROOT -# and here's how to compile C++ files from the IDL file. -# only ONE of these rules will be run at make-time, - -# The rules are only used if TAO_ROOT is not defined to avoid -# conflicts with a similar rule in TAO. - -%S.cpp: %.idl - $(IDL) --version $(IDLFLAGS) $< - -%C.cpp: %.idl - $(IDL) --version $(IDLFLAGS) $< - -%.hh: %.idl - $(IDL) --version $(IDLFLAGS) $< -endif # TAO_ROOT - -# C++ related targets - -$(VDIR)%.o: %.c - $(COMPILE.c) -o $@ $< - ${MVCMD} - -$(VDIR)%.o: %.cpp - $(COMPILE.cc) -o $@ $< - ${MVCMD} - -#$(VDIR)%.o: %.C -# $(COMPILE.cc) -o $@ $< - -#$(VDIR)%.o: %.cc -# $(COMPILE.cc) -o $@ $< - -# If SOLINK is defined, then the .so file is built from the .o file via -# separate rules in the same directory. Otherwise, the .so and .o are -# built via the same rule. SOLINK is required for the repository under -# gcc. -ifndef SOLINK -# I added the "Executable Shared Object (ESO)" define to separate between -# normal shared object files and executable shared object files (the kind -# that the service configurator needs to be able to function). -# 970104 Marius Kjeldahl <mariusk@sn.no, marius@funcom.com> -ifdef (ESOBUILD) -$(VSHDIR)%.$(SOEXT): %.cpp - $(ESOBUILD) -else -$(VSHDIR)%.$(SOEXT): %.cpp - $(SOBUILD) -endif -$(VSHDIR)%.o: %.cpp - $(COMPILE.cc) $(PIC) -o $@ $< -$(VSHDIR)%.o: %.cc - $(COMPILE.cc) $(PIC) -o $@ $< -$(VSHDIR)%.$(SOEXT): $(VSHDIR)%.o - $(SOLINK) -endif - -#---------------------------------------------------------------------------- -# Library generation targets -#---------------------------------------------------------------------------- - -.PRECIOUS: $(VLIB) - -#### show_statics shows static objects in locally-created object files. -#### It assumes that the object files were built using g++. -#### TOOLENV selects the proper nm in VxWorks host environments. -#### TOOLDIR allows specification of the full path to nm via definition -#### in the platform_macros.GNU file. -show_statics: - -@$(TOOLDIR)nm$(TOOLENV) -Co $(VSHDIR)*o | \ - egrep ' global destructors '; true - -#### show_uninit shows uninitialized data in locally-created object files. -#### TOOLENV selects the proper nm in VxWorks host environments. -show_uninit: - -@$(TOOLDIR)nm$(TOOLENV) -Co $(VSHDIR)*o | egrep ' b ' - -#---------------------------------------------------------------------------- -# Installation targets -#---------------------------------------------------------------------------- - -install.local: $(INSTALL) - -deinstall.local: - $(RM) $(INSTALL) $(LIB:%.a=$(INSLIB)/%*.a) $(SHLIB:%.$(SOEXT)=$(INSLIB)/%*.$(SOEXT)) - - -#### To disable installs, just add "INSTALL=" to your "make" invocation. - -ifeq (,$(LN_S)) - LN_S = ln -s -endif # ! LN_S - -$(INSBIN)/%$(VAR) \ -$(INSINC)/ace% \ -$(INSLIB)/%$(VAR).a \ -$(INSLIB)/%$(VAR).$(SOEXT)$(ACE_LDSO_Version_Number) \ -$(INSMAN)/man1/% \ -$(INSMAN)/man2/% \ -$(INSMAN)/man3/% \ -$(INSMAN)/man4/% \ -$(INSMAN)/man5/% \ -$(INSMAN)/man6/% \ -$(INSMAN)/man7/% \ -$(INSMAN)/man8/% \ -$(INSMAN)/manl/% \ -$(INSMAN)/mann/% : - @if test $(shell pwd) != $(@D) -o -n "$(ACE_LDSO_Version_Number)" ; then \ - if test -s $@ ; then \ - echo "$(@F) already installed" ; \ - else \ - echo "Installing $(@F) -> $(@D)" ; \ - $(RM) $(@); $(LN_S) $(shell pwd)/$(@F:%.$(SOEXT)$(ACE_LDSO_Version_Number)=%.$(SOEXT)) $(@) ; \ - fi ; \ - fi -ifdef MVSLIB -#special for MVS in order to use the .x files - @if test -w $(@D) ; then \ - if test -s $(@:.$(SOEXT)=.x) ; then \ - echo "$(@F:.$(SOEXT)=.x) already installed" ; \ - else \ - echo "Installing $(@F:.$(SOEXT)=.x) -> $(@D)" ; \ - $(RM) $(@); $(LN_S) $(shell pwd)/$(@F:.$(SOEXT)=.x) $(@:.$(SOEXT)=.x) ; \ - fi \ - fi -endif - -#---------------------------------------------------------------------------- -# Cleanup targets -#---------------------------------------------------------------------------- - -clean.local: - -$(RM) *.o *~ *.bak *.rpo *.sym lib*.*_pure_* Makefile.old core - -$(RM) -r $(OBJDIRS) $(TEMPINCDIR) ptrepository Templates.DB \ - gcctemp.c gcctemp so_locations - -realclean.local: clean.local - -$(RM) $(BIN) $(BIN:%=%_debug) $(BIN:%=%_profile) $(BIN:%=%_optimize) $(LIB:%=%) $(LIB:%=%_debug) $(LIB:%=%_profile) $(LIB:%=%_optimize) $(SHLIB:%=%) $(SHLIB:%=%_debug) $(SHLIB:%=%_profile) $(SHLIB:%=%_optimize) $(SHLIBA:%=%) $(BIN2) $(BIN2:%=%_debug) $(BIN2:%=%_profile) $(BIN2:%=%_optimize) $(LIB2:%=%) $(LIB2:%=%_debug) $(LIB2:%=%_profile) $(LIB2:%=%_optimize) $(SHLIB2:%=%) $(SHLIB2:%=%_debug) $(SHLIB2:%=%_profile) $(SHLIB2:%=%_optimize) $(SHLIBA2:%=%) - -#---------------------------------------------------------------------------- -# Dependency generation target -#---------------------------------------------------------------------------- - -ifndef MAKEFILE - MAKEFILE=Makefile -endif # MAKEFILE - -ifndef TAO_ROOT - TAO_ROOT = $(ACE_ROOT)/TAO -endif # TAO_ROOT - -# If no libraries are build in the current directory (actually, if -# rules.lib.GNU isn't included), then SOEXT might not be set. -ifndef SOEXT - SOEXT=so -endif # SOEXT - -depend.local: $(MAKEFILE) - @$(RM) $(MAKEFILE).old - @cp $(MAKEFILE) $(MAKEFILE).old - $(ACE_ROOT)/bin/g++dep -f $(MAKEFILE) $(CPPFLAGS) -DMAKEDEPEND $(LSRC) $(SRC) $(PSRC) - @cat $(MAKEFILE) | \ - sed -e "s;$(TAO_ROOT);\$$(TAO_ROOT);g" \ - -e "s;$(ACE_ROOT);\$$(ACE_ROOT);g" \ - -e '/$$(ACE_ROOT)\/ace\/config[^\.]*\.h/d' \ - -e "s; /[-a-zA-Z0-9_./]*\.h;;g" \ - -e "s;\([-a-zA-Z0-9._]*\)\.o:;.obj/\1.o .obj/\1.$(SOEXT) $(VSHDIR)\1.o $(VSHDIR)\1.$(SOEXT):;" \ - > $(MAKEFILE).new - @cat $(MAKEFILE).new >$(MAKEFILE) - @$(RM) $(MAKEFILE).new - @if cmp -s $(MAKEFILE) $(MAKEFILE).old ;\ - then echo "Makefile dependencies unchanged." ;\ - else \ - echo "Makefile dependencies updated." ;\ - fi ;\ - $(RM) $(MAKEFILE).old ; - -#---------------------------------------------------------------------------- -# RCS info target -#---------------------------------------------------------------------------- - -rcs_info.local: - @rcs info - -#---------------------------------------------------------------------------- -# Variant targets and conditional macros -#---------------------------------------------------------------------------- - -build.objdirs: $(OBJDIRS) - -$(OBJDIRS): - test -d $@ || mkdir $@ diff --git a/include/makeinclude/rules.nested.GNU b/include/makeinclude/rules.nested.GNU deleted file mode 100644 index 16636a25a25..00000000000 --- a/include/makeinclude/rules.nested.GNU +++ /dev/null @@ -1,14 +0,0 @@ -#---------------------------------------------------------------------------- -# $Id$ -# -# Nested directory targets makefile definitions -#---------------------------------------------------------------------------- - -$(TARGETS_NESTED): -ifneq ($(DIRS),) -ifeq (Windows,$(findstring Windows,$(OS))) - @cmd /c "FOR /D %i IN ($(DIRS)) DO $(MAKE) -C %i $(@:.nested=)" -else # ! Windows - @for dir in $(DIRS); do $(MAKE) -C $$dir $(@:.nested=); done -endif # ! Windows -endif # DIRS diff --git a/include/makeinclude/rules.nolocal.GNU b/include/makeinclude/rules.nolocal.GNU deleted file mode 100644 index f440e3b7d5e..00000000000 --- a/include/makeinclude/rules.nolocal.GNU +++ /dev/null @@ -1,8 +0,0 @@ -#---------------------------------------------------------------------------- -# $Id$ -# -# Makefile for directories with no local build targets -#---------------------------------------------------------------------------- - -$(TARGETS_LOCAL): - diff --git a/include/makeinclude/rules.nonested.GNU b/include/makeinclude/rules.nonested.GNU deleted file mode 100644 index a144a511fc0..00000000000 --- a/include/makeinclude/rules.nonested.GNU +++ /dev/null @@ -1,8 +0,0 @@ -#---------------------------------------------------------------------------- -# $Id$ -# -# Null nested targets -#---------------------------------------------------------------------------- - -$(TARGETS_NESTED): - diff --git a/include/makeinclude/wrapper_macros.GNU b/include/makeinclude/wrapper_macros.GNU deleted file mode 100644 index e3624eb97fb..00000000000 --- a/include/makeinclude/wrapper_macros.GNU +++ /dev/null @@ -1,496 +0,0 @@ -#---------------------------------------------------------------------------- -# $Id$ -#---------------------------------------------------------------------------- -# -# ACE supports the following flags. They can be enabled either on -# the command line, e.g., "make purify=1", or added to your -# platform_macros.GNU. To disable the option, set the flag to null, -# e.g., "make debug=". Some flags support setting to 0 disable, -# e.g., "make debug=0". debug=1 is enabled in the platform files -# that are released with ACE. -# -# Please note that the effects of a flag may be platform specific. -# Also, combinations of certain flags may or may not be allowed on -# specific platforms, e.g., debug=1 opt=1 is supported by g++ but -# not all other C++ compilers. -# -# Flag Description -# ---- ----------- -# debug Enable debugging; see DCFLAGS and DCCFLAGS. -# exceptions Enable exception handling (not supported by all platforms). -# minimum_corba Enable minimumCORBA support. -# fast Enable -fast option, e.g., with Sun C++. -# inline Enable ACE inlining. Some platforms enable inlining by -# default, others do not. -# optimize Enable optimization; see OCFLAGS and OCCFLAGS. -# orbix Enable use of Orbix. -# probe Enable ACE_Timeprobes. -# profile Enable profiling; see PCFLAGS and PCCFLAGS. -# purify Purify all executables. purify must be in user's PATH! -# quantify Quantify all executables. quantify must be in user's PATH! -# repo Use GNU template repository (g++ with repo patches and -# egcs only). -# rtti Enable run-time type identification. On some platforms, -# it is enabled by default, so this is ignored. -# shared_libs Build shared libraries. Ignored if static_libs_only is set. -# static_libs Build static libraries. Ignored if shared_libs_only is set. -# shared_libs_only Only build shared libraries. Ignored if no SHLIBs are -# specified by the Makefile, as in performance-tests/Misc. -# static_libs_only Only build static libraries. -# threads Build with thread support. -# xt_reactor Build the XtReactor. -# fl_reactor Build the FlReactor. -# tk_reactor Build the TkReactor. -# -# Usually, users do not need to be concerned with make targets. -# Just enter "make" on the command line to build. A few notable -# targets are listed below. -# -# Target Description -# ------ ----------- -# show_statics Lists all static objects in object files built for -# current directory. Only supported for g++. -# show_uninit Lists all uninitialized in object files built for -# current directory. Only supported for g++. -# -# The following describes the ACE wrapper macros: -# -# Variable Description -# -------- ----------- -# ACE_HAS_GNUG_PRE_2_8 CXX includes "g++", and the g++ version is -# prior to 2.8.0. This is automatically determined -# below, but can be overridden in the user's -# platform_macros.GNU or environment. -# ARFLAGS Flags for the archive utility (ar) -# CC C compiler command -# CXX C++ compiler command -# COMPILE.c Flags for compiling with C -# COMPILE.cc Flags for compiling with C++ -# CPPFLAGS C pre-processor flags -# CFLAGS C compilation flags -# CCFLAGS C++ compilation flags -# DCFLAGS C compilation flags for debugging -# DCCFLAGS C++ compilation flags for debugging -# DEFFLAGS C++ preprocessor flag for defining symbols -# DLD Name of dynamic linker -# LD Name of linker -# IDL Name of the CORBA IDL compiler -# INSBIN Binary (executable) installation directory -# INSINC Include file installation directory -# INSMAN Manpage installation directory -# INSLIB Library installation directory -# LDFLAGS ld linker flags -# LINK.c Flags for linking with C -# LINK.cc Flags for linking with C++ -# MAKEFLAGS Flags that are passed into the compilation from the commandline -# OCFLAGS Optimizing C compilation flags -# OCCFLAGS Optimizing C++ compilation flags -# ORBIX_ROOT Root of IONA's Orbix CORBA implementation -# PCFLAGS C compilation flags for profiling -# PCCFLAGS C++ compilation flags for profiling -# PLATFORM_XT_CPPFLAGS Platform CPP options for X11 (some require -I...) -# PLATFORM_XT_LDFLAGS Platform LD options for X11 (some require -L...) -# PLATFORM_XT_LIBS Platform libraries require with X11 -# PRELINK Executable to precede linking, such as quantify -# PURELINK If set, contains purify executable as well as all options -# PURE_CACHE_BASE_DIR -# The base directory in which Pure products will produce -# instrumented libraries. If you don't want that to be below -# /tmp, set this variable in your environment or on the make -# command line. -# PURE_CACHE_DIR -# The full name of the directory in which Pure produces will -# produce instrumented libraries. -# PTDIRS Pathnames of directories containing template code -# RM Name of program to use to remove files -# SOFLAGS Flags used to build a shared library -# SOLINK.cc Link line necessary to build a share library -# VAR Variant identifier suffix -# VDIR Directory for object code -# VSHDIR Directory for shared object code -# ACE_ROOT Pathname for the root of the build tree -# -#---------------------------------------------------------------------------- -# Platform-dependent macro definitions -# (link to the appropriate platform-specific config file). -#---------------------------------------------------------------------------- - -#### Default to building shared libraries only. Set it here to give the -#### platform a chance to override. -shared_libs = 1 -static_libs = 0 - -#### Let platform just look at whether or not exceptions is defined. -#### With the following override, it doesn't have to check for 0. -ifeq ($(exceptions),0) - override exceptions = -endif # exceptions - -ifeq ($(fast),0) - override fast = -endif # fast - -ifeq ($(rtti),0) - override rtti = -endif # rtti - -#### Defined versioned_so = 1 if your platform requires version number -#### be appended after so library. -versioned_so = 0 - -#### The system has X Windows and we want to include the XtReactor in -#### the library -xt_reactor = 0 - -include $(ACE_ROOT)/include/makeinclude/platform_macros.GNU - -#---------------------------------------------------------------------------- -# Platform-independent macro definitions -#---------------------------------------------------------------------------- - -CPPFLAGS += $(DEFFLAGS) $(INCLDIRS) -IDL = idl -IDLFLAGS = -A -B -s S.cpp -c C.cpp -ifeq (,$(findstring -I$(ACE_ROOT),$(INCLDIRS))) - INCLDIRS += -I. -I$(ACE_ROOT) -endif -INSBIN = $(ACE_ROOT)/bin -INSINC = $(ACE_ROOT)/ace -INSLIB = $(ACE_ROOT)/ace -INSMAN = $(ACE_ROOT)/man -ifeq (,$(findstring -L$(ACE_ROOT)/ace,$(LDFLAGS))) - LDFLAGS += -L$(ACE_ROOT)/ace -L./ -endif -LEX = flex -PCFLAGS += #### set in platform_macros.GNU file, e.g., -p -PCCFLAGS += #### set in platform_macros.GNU file, e.g., -p -VAR = -VDIR = .obj/ -ifndef ACELIB - ACELIB = -lACE -endif -ifndef VSHDIR - VSHDIR = .shobj/ -endif # VSHDIR -# NOTE: VLDLIBS is defined below, in case it is overridden for static- -# or shared-only builds. -YACC = yacc - -# Define SOEXT trailing digits if platform needs it. -ifeq ($(versioned_so),1) - ACE_LDSO_Version_Number := $(shell echo .`perl -ne 'if (/ACE version/) \ - { s/[^0-9]+(\d+\.\d+)(\.\d+)?.+/\1/ ; print }' ${ACE_ROOT}/VERSION `) -else - ACE_LDSO_Version_Number = -endif - -#---------------------------------------------------------------------------- -# Platform-dependent macros that require platform_macros.GNU. -#---------------------------------------------------------------------------- - -ifeq ($(findstring g++,$(CXX)),g++) - ifndef ACE_HAS_GNUG_PRE_2_8 - ifeq ($(CXX),g++) - ACE_HAS_GNUG_PRE_2_8 := \ - $(shell \ - if $(CXX) --version | egrep '^(cygnus-)?2\.[0-7]' > /dev/null; then \ - echo 1; else echo 0; fi) - else - ifeq ($(CXX),eg++) - # Assume that eg++ is egcs. - ACE_HAS_GNUG_PRE_2_8 := 0 - else # ! plain g++ or eg++ - # CXX is something like g++386. Assume, for now, that it's an old g++. - ACE_HAS_GNUG_PRE_2_8 := 1 - endif # eg++ - endif # ! plain g++ or eg++ - endif # ! ACE_HAS_GNUG_PRE_2_8 -else - ACE_HAS_GNUG_PRE_2_8 = -endif # g++ - -#---------------------------------------------------------------------------- -# make flags -#---------------------------------------------------------------------------- - -ifeq ($(optimize),0) - override optimize = -endif # optimize - -ifneq ($(optimize),) - CFLAGS += $(OCFLAGS) - CCFLAGS += $(OCCFLAGS) -endif # optimize - -ifeq ($(debug),0) - override debug = -endif # debug - -ifeq ($(debug),) - ifeq (,$(findstring $(CFLAGS),$(CCFLAGS))) - CCFLAGS += -DACE_NDEBUG - else - CFLAGS += -DACE_NDEBUG - endif -else - CFLAGS += $(DCFLAGS) - CCFLAGS += $(DCCFLAGS) -endif # debug - -ifeq ($(threads),0) - override threads = -endif # threads - -ifeq ($(xt_reactor),0) - override xt_reactor = -endif # xt_reactor - -ifneq ($(xt_reactor),) - override ace_with_x11=1 - CPPFLAGS += -DACE_HAS_XT $(PLATFORM_XT_CPPFLAGS) - LIBS += $(PLATFORM_XT_LIBS) - LDFLAGS += $(PLATFORM_XT_LDFLAGS) -endif # xt_reactor - -ifeq ($(fl_reactor),0) - override fl_reactor = -endif # fl_reactor - -ifneq ($(fl_reactor),) - override ace_with_x11=1 - override ace_with_gl=1 - CPPFLAGS += -DACE_HAS_FL $(PLATFORM_FL_CPPFLAGS) - LIBS += $(PLATFORM_FL_LIBS) - LDFLAGS += $(PLATFORM_FL_LDFLAGS) -endif # fl_reactor - -ifeq ($(tk_reactor),0) - override tk_reactor = -endif # tk_reactor - -ifneq ($(tk_reactor),) - override ace_with_tk=1 - CPPFLAGS += -DACE_HAS_TK $(PLATFORM_TK_CPPFLAGS) - LIBS += $(PLATFORM_TK_LIBS) - LDFLAGS += $(PLATFORM_TK_LDFLAGS) -endif # tk_reactor - -ifeq ($(ace_with_gl),0) - override ace_with_gl = -endif # ace_with_gl - -ifneq ($(ace_with_gl),) - override ace_with_x11 = 1 - CPPFLAGS += $(PLATFORM_GL_CPPFLAGS) - LIBS += $(PLATFORM_GL_LIBS) - LDFLAGS += $(PLATFORM_GL_LDFLAGS) -endif # ace_with_gl - -ifeq ($(ace_with_x11),0) - override ace_with_x11 = -endif # ace_with_x11 - -ifneq ($(ace_with_x11),) - CPPFLAGS += $(PLATFORM_X11_CPPFLAGS) - LIBS += $(PLATFORM_X11_LIBS) - LDFLAGS += $(PLATFORM_X11_LDFLAGS) -endif # ace_with_x11 - - -ifdef exceptions - CPPFLAGS += -DACE_HAS_EXCEPTIONS - ifeq ($(findstring g++,$(CXX)),g++) - ifeq ($(ACE_HAS_GNUG_PRE_2_8),1) - #### Enable exception handling with g++ < 2.8.0. Not recommended, - #### but provided here for completeness. - CCFLAGS += -fhandle-exceptions - endif # ACE_HAS_GNUG_PRE_2_8 - endif # g++ -else # ! exceptions - ifeq ($(ACE_HAS_GNUG_PRE_2_8),0) - #### Disable the default exception handling of g++ >= 2.8.0. - CCFLAGS += -fno-exceptions - endif # ! ACE_HAS_GNUG_PRE_2_8 -endif # ! exceptions - -ifeq ($(minimum_corba),1) - CPPFLAGS += -DTAO_HAS_MINIMUM_CORBA -endif # minimum_corba - -ifeq ($(profile),0) - override profile = -endif # profile - -ifneq ($(profile),) - CFLAGS += $(PCFLAGS) - CCFLAGS += $(PCCFLAGS) -endif # profile - -ifeq ($(inline),0) - CCFLAGS += -DACE_NO_INLINE -else -ifeq ($(inline),1) - CCFLAGS += -D__ACE_INLINE__ -endif # inline eq 1 -endif # inline eq 0 - -ifeq ($(shared_libs),0) - override shared_libs = -endif # shared_libs -ifeq ($(static_libs),0) - override static_libs = -endif # static_libs - -ifeq ($(shared_libs_only),0) - override shared_libs_only = -endif # shared_libs_only -ifeq ($(static_libs_only),0) - override static_libs_only = -endif # static_libs_only - -ifdef shared_libs_only - override shared_libs = 1 - override static_libs = -endif # shared_libs_only -ifdef static_libs_only - override shared_libs = - override static_libs = 1 -endif # static_libs_only - -#### We need to set VBIN here, because it's used in the BUILD -#### definitions below. -VBIN = $(BIN:%=%$(VAR)) - -ifdef shared_libs - ifdef static_libs - #### Build both shared and static libs. - BUILD = $(VSHLIB) $(SHLIBA) $(VLIB) $(VBIN) - else # ! static_libs - #### Build shared libs only. - ifeq ($(SHLIB),) - #### Makefile only specifies static libs, so only build static libs. - BUILD = $(VLIB) $(VBIN) - else # ! SHLIB - #### Don't build static libs. - BUILD = $(VSHLIB) $(SHLIBA) $(VBIN) - LIB = - OBJEXT = so - ifndef VXWORKS - VDIR = .shobj/ - endif # ! VXWORKS - ifeq ($(BIN),) - #### No executables are being built, so don't create .obj/. - OBJDIRS = .shobj - endif # BIN - endif # ! SHLIB - endif # ! static_libs - - ifdef SHLIBA - LDLIBS := $(LDLIBS:-l%=-l%shr) - endif # SHLIBA -else # ! shared_libs - ifdef static_libs - #### Don't build shared libs. - BUILD = $(VLIB) $(VBIN) - OBJDIRS = .obj - PIC = - SHLIB = - SOEXT = o - VSHDIR = .obj/ - VLDLIBS = $(LDLIBS:%.so=%.o) - else # ! static_libs - #### Don't build any libs. - BUILD = $(VBIN) - endif # ! static_libs -endif # ! shared_libs - -VLDLIBS := $(LDLIBS) $(ACELIB) $(LIBS) - -ifeq ($(probe),0) - override probe = -endif # probe - -ifeq ($(probe),1) - CCFLAGS += -DACE_COMPILE_TIMEPROBES -endif # probe - -ifeq ($(purify),0) - override purify = -endif # purify - -PURE_CACHE_BASE_DIR = /tmp/purifycache -PURE_CACHE_DIR = $(PURE_CACHE_BASE_DIR)-$(LOGNAME)-$(notdir $(CXX) ) - -ifdef purify - #### Pick up Purify directory from the users PATH. - ACE_PURIFY_DIR := \ - $(shell type purify | sed -e 's/.* is //' -e 's%/purify$$%%') - - #### You might want to adjust the Purify options below. - #### -best-effort is undocumented but supported, and seems - #### to help avoid occasional link failure. - #### SIGINT is used by the ACE Thread_Manager_Test. - PURELINK += purify -best-effort -cache-dir=$(PURE_CACHE_DIR) \ - -chain-length=20 -fds-inuse-at-exit=no -ignore-signals=SIGINT \ - -inuse-at-exit -max_threads=100 - CCFLAGS += -DACE_HAS_PURIFY - CPPFLAGS += -I$(ACE_PURIFY_DIR) -endif # purify - -ifeq ($(quantify),0) - override quantify = -endif # quantify - -ifdef quantify - #### Pick up Quantify directory from the users PATH. - ACE_QUANTIFY_DIR := \ - $(shell type quantify | sed -e 's/.* is //' -e 's%/quantify$$%%') - - #### You might want to adjust the Quantify options below. - #### -best-effort is undocumented but supported, and seems - #### to help avoid occasional link failure. - PRELINK += quantify -best-effort -cache-dir=$(PURE_CACHE_DIR) \ - -max_threads=100 - CCFLAGS += -DACE_HAS_QUANTIFY - CPPFLAGS += -I$(ACE_QUANTIFY_DIR) - - ifeq ($(shell uname -p),sparc) - PRELINK += -record-register-window-traps - endif # sparc -endif # quantify - -ifeq ($(repo),0) - override repo = -endif # repo - -ifdef repo - #### Remove -fno-implicit-templates from, and add -frepo to, CCFLAGS. - CCFLAGS := $(strip $(subst -fno-implicit-templates,,$(CCFLAGS))) - CCFLAGS += -frepo -DACE_HAS_GNU_REPO -endif # repo - -#---------------------------------------------------------------------------- -# Conditional macro definitions -#---------------------------------------------------------------------------- - -COMPILE.c = $(CC) $(CFLAGS) $(CPPFLAGS) -c -COMPILE.cc = $(CXX) $(CCFLAGS) $(CPPFLAGS) $(PTDIRS) -c -COMPILE-NO_DASH_G.cc = `echo $(COMPILE.cc) | sed 's/-g //'` -# 960905 Marius Kjeldahl <marius@funcom.com> -# Added the line below to be used for compiling executable shared objects -COMPILEESO.cc = $(CXX) $(CCFLAGS) $(CPPFLAGS) $(PTDIRS) - -ifeq ($(LINK.c),override) - LINK.c = $(LINK.c.override) -else - LINK.c = $(PURELINK) $(PRELINK) $(LD) $(CFLAGS) $(CPPFLAGS) $(LDFLAGS) \ - $(LDLIBS) $(LIBS) -endif # LINK.c.override - -ifeq ($(LINK.cc),override) - LINK.cc = $(LINK.cc.override) -else - LINK.cc = $(PURELINK) $(PRELINK) $(LD) $(CCFLAGS) $(CPPFLAGS) $(PTDIRS) -endif # LINK.cc.override - -SOLINK.cc = $(PRELINK) $(DLD) $(SOFLAGS) |