diff options
Diffstat (limited to 'tests/rtems_init.c')
| -rw-r--r-- | tests/rtems_init.c | 210 |
1 files changed, 0 insertions, 210 deletions
diff --git a/tests/rtems_init.c b/tests/rtems_init.c deleted file mode 100644 index 81750a913e9..00000000000 --- a/tests/rtems_init.c +++ /dev/null @@ -1,210 +0,0 @@ -/* - * RTEMS Network configuration/initialization - * - * This file is a merger of the netdemo/init.c and networkconfig.h - * with some modifications to support loopback only. This file - * is OK for a starting point for a real networked application. - * --joel sherrill 16 Mar 2001 - * - * This program may be distributed and used for any purpose. - * I ask only that you: - * 1. Leave this author information intact. - * 2. Document any changes you make. - * - * W. Eric Norum - * Saskatchewan Accelerator Laboratory - * University of Saskatchewan - * Saskatoon, Saskatchewan, CANADA - * eric@skatter.usask.ca - * - * $Id$ - */ - -#include <bsp.h> - -#define CONFIGURE_TEST_NEEDS_CONSOLE_DRIVER -#define CONFIGURE_TEST_NEEDS_CLOCK_DRIVER -#define CONFIGURE_RTEMS_INIT_TASKS_TABLE - -#define CONFIGURE_EXECUTIVE_RAM_SIZE (512*1024) -#define CONFIGURE_MAXIMUM_SEMAPHORES 20 -#define CONFIGURE_MAXIMUM_TASKS 20 - -#define CONFIGURE_MICROSECONDS_PER_TICK 10000 - -#define CONFIGURE_INIT_TASK_STACK_SIZE (10*1024) -#define CONFIGURE_INIT_TASK_PRIORITY 120 -#define CONFIGURE_INIT_TASK_INITIAL_MODES (RTEMS_PREEMPT | \ - RTEMS_NO_TIMESLICE | \ - RTEMS_NO_ASR | \ - RTEMS_INTERRUPT_LEVEL(0)) - -#define CONFIGURE_INIT -rtems_task Init (rtems_task_argument argument); - -#include <confdefs.h> - -#include <stdio.h> -#include <rtems/rtems_bsdnet.h> -/* start of #include "../networkconfig.h" */ - -/* - * Network configuration - * - ************************************************************ - * EDIT THIS FILE TO REFLECT YOUR NETWORK CONFIGURATION * - * BEFORE RUNNING ANY RTEMS PROGRAMS WHICH USE THE NETWORK! * - ************************************************************ - * - * $Id$ - */ - -#ifndef _RTEMS_NETWORKCONFIG_H_ -#define _RTEMS_NETWORKCONFIG_H_ - -#ifndef RTEMS_BSP_NETWORK_DRIVER_NAME -#warning "RTEMS_BSP_NETWORK_DRIVER_NAME is not defined" -#define RTEMS_BSP_NETWORK_DRIVER_NAME "no_network1" -#endif - -#ifndef RTEMS_BSP_NETWORK_DRIVER_ATTACH -#warning "RTEMS_BSP_NETWORK_DRIVER_ATTACH is not defined" -#define RTEMS_BSP_NETWORK_DRIVER_ATTACH 0 -#endif - -/* #define RTEMS_USE_BOOTP */ - -#include <bsp.h> - -/* - * Define RTEMS_SET_ETHERNET_ADDRESS if you want to specify the - * Ethernet address here. If RTEMS_SET_ETHERNET_ADDRESS is not - * defined the driver will choose an address. - */ -#define RTEMS_SET_ETHERNET_ADDRESS -#if (defined (RTEMS_SET_ETHERNET_ADDRESS)) -/* static char ethernet_address[6] = { 0x08, 0x00, 0x3e, 0x12, 0x28, 0xb1 }; */ -static char ethernet_address[6] = { 0x00, 0x80, 0x7F, 0x22, 0x61, 0x77 }; - -#endif - -#define RTEMS_USE_LOOPBACK -#define RTEMS_USE_LOOPBACK_ONLY -#ifdef RTEMS_USE_LOOPBACK -/* - * Loopback interface - */ -int rtems_bsdnet_loopattach(struct rtems_bsdnet_ifconfig *, int); - -#ifdef RTEMS_USE_LOOPBACK_ONLY -static struct rtems_bsdnet_ifconfig netdriver_config = { -#else -static struct rtems_bsdnet_ifconfig loopback_config = { -#endif - "lo0", /* name */ - rtems_bsdnet_loopattach, /* attach function */ - - NULL, /* link to next interface */ - - "127.0.0.1", /* IP address */ - "255.0.0.0", /* IP net mask */ -}; -#endif - -/* - * Default network interface - */ -#ifndef RTEMS_USE_LOOPBACK_ONLY -static struct rtems_bsdnet_ifconfig netdriver_config = { - RTEMS_BSP_NETWORK_DRIVER_NAME, /* name */ - RTEMS_BSP_NETWORK_DRIVER_ATTACH, /* attach function */ - -#ifdef RTEMS_USE_LOOPBACK - &loopback_config, /* link to next interface */ -#else - NULL, /* No more interfaces */ -#endif - -#if (defined (RTEMS_USE_BOOTP)) - NULL, /* BOOTP supplies IP address */ - NULL, /* BOOTP supplies IP net mask */ -#else - "XXX.YYY.ZZZ.XYZ", /* IP address */ - "255.255.255.0", /* IP net mask */ -#endif /* !RTEMS_USE_BOOTP */ - -#if (defined (RTEMS_SET_ETHERNET_ADDRESS)) - ethernet_address, /* Ethernet hardware address */ -#else - NULL, /* Driver supplies hardware address */ -#endif - 0 /* Use default driver parameters */ -}; -#endif - -/* - * Network configuration - */ -struct rtems_bsdnet_config rtems_bsdnet_config = { - &netdriver_config, - -#if (defined (RTEMS_USE_BOOTP)) - rtems_bsdnet_do_bootp, -#else - NULL, -#endif - - 0, /* Default network task priority */ - 0, /* Default mbuf capacity */ - 0, /* Default mbuf cluster capacity */ - -#if (!defined (RTEMS_USE_BOOTP)) - "rtems_host", /* Host name */ - "nodomain.com", /* Domain name */ - "XXX.YYY.ZZZ.1", /* Gateway */ - "XXX.YYY.ZZZ.1", /* Log host */ - {"XXX.YYY.ZZZ.1" }, /* Name server(s) */ - {"XXX.YYY.ZZZ.1" }, /* NTP server(s) */ - - /* - * A real example -- DO NOT USE THIS YOURSELF!!! - */ - -#if 0 - "dy4", /* Host name */ - "NOT_oarcorp.com", /* Domain name */ - "192.168.1.2", /* Gateway */ - "192.168.1.2", /* Log host */ - {"192.168.1.2" }, /* Name server(s) */ - {"192.168.1.2" }, /* NTP server(s) */ -#endif -#endif /* !RTEMS_USE_BOOTP */ - -}; - -/* - * For TFTP test application - */ -#if (defined (RTEMS_USE_BOOTP)) -#define RTEMS_TFTP_TEST_HOST_NAME "BOOTP_HOST" -#define RTEMS_TFTP_TEST_FILE_NAME "BOOTP_FILE" -#else -#define RTEMS_TFTP_TEST_HOST_NAME "XXX.YYY.ZZZ.XYZ" -#define RTEMS_TFTP_TEST_FILE_NAME "tftptest" -#endif - -#endif /* _RTEMS_NETWORKCONFIG_H_ */ -/* end of #include "../networkconfig.h" */ - -/* - * RTEMS Startup Task - */ -rtems_task -Init (rtems_task_argument ignored) -{ - int doSocket(void); - - rtems_bsdnet_initialize_network (); - rtems_bsdnet_show_inet_routes (); - exit (0); -} |