diff options
Diffstat (limited to 'libnm-core/nm-setting-wireless-security.c')
| -rw-r--r-- | libnm-core/nm-setting-wireless-security.c | 117 |
1 files changed, 117 insertions, 0 deletions
diff --git a/libnm-core/nm-setting-wireless-security.c b/libnm-core/nm-setting-wireless-security.c index 9a7b5a591d..b3ca0a01f7 100644 --- a/libnm-core/nm-setting-wireless-security.c +++ b/libnm-core/nm-setting-wireless-security.c @@ -1330,6 +1330,13 @@ nm_setting_wireless_security_class_init (NMSettingWirelessSecurityClass *setting * WPA-PSK), or "wpa-eap" (WPA-Enterprise). This property must be set for * any Wi-Fi connection that uses security. **/ + /* ---ifcfg-rh--- + * property: key-mgmt + * variable: KEY_MGMT(+) + * values: IEEE8021X, WPA-PSK, WPA-EAP + * description: Key management menthod. + * ---end--- + */ g_object_class_install_property (object_class, PROP_KEY_MGMT, g_param_spec_string (NM_SETTING_WIRELESS_SECURITY_KEY_MGMT, "", "", @@ -1346,6 +1353,14 @@ nm_setting_wireless_security_class_init (NMSettingWirelessSecurityClass *setting * (default key) through 3. Note that some consumer access points (like the * Linksys WRT54G) number the keys 1 - 4. **/ + /* ---ifcfg-rh--- + * property: wep-tx-keyidx + * variable: DEFAULTKEY + * values: 1, 2, 3, 4 + * default: 1 + * description: Index of active WEP key. + * ---end--- + */ g_object_class_install_property (object_class, PROP_WEP_TX_KEYIDX, g_param_spec_uint (NM_SETTING_WIRELESS_SECURITY_WEP_TX_KEYIDX, "", "", @@ -1363,6 +1378,13 @@ nm_setting_wireless_security_class_init (NMSettingWirelessSecurityClass *setting * using Cisco LEAP (ie, key-mgmt = "ieee8021x" and auth-alg = "leap") the * "leap-username" and "leap-password" properties must be specified. **/ + /* ---ifcfg-rh--- + * property: auth-alg + * variable: SECURITYMODE(+) + * values: restricted, open, leap + * description: Authentication algorithm for WEP. + * ---end--- + */ g_object_class_install_property (object_class, PROP_AUTH_ALG, g_param_spec_string (NM_SETTING_WIRELESS_SECURITY_AUTH_ALG, "", "", @@ -1377,6 +1399,14 @@ nm_setting_wireless_security_class_init (NMSettingWirelessSecurityClass *setting * Each element may be one "wpa" (allow WPA) or "rsn" (allow WPA2/RSN). If * not specified, both WPA and RSN connections are allowed. **/ + /* ---ifcfg-rh--- + * property: proto + * variable: WPA_ALLOW_WPA(+), WPA_ALLOW_WPA2(+) + * values: yes, no + * default: no + * description: Allowed WPA protocols, WPA and WPA2 (RSN). + * ---end--- + */ g_object_class_install_property (object_class, PROP_PROTO, g_param_spec_boxed (NM_SETTING_WIRELESS_SECURITY_PROTO, "", "", @@ -1392,6 +1422,14 @@ nm_setting_wireless_security_class_init (NMSettingWirelessSecurityClass *setting * For maximum compatibility leave this property empty. Each list element * may be one of "tkip" or "ccmp". **/ + /* ---ifcfg-rh--- + * property: pairwise + * variable: CIPHER_PAIRWISE(+) + * values: CCMP, TKIP + * description: Restrict pairwise encryption algorithms, specified as a space + * separated list. + * ---end--- + */ g_object_class_install_property (object_class, PROP_PAIRWISE, g_param_spec_boxed (NM_SETTING_WIRELESS_SECURITY_PAIRWISE, "", "", @@ -1407,6 +1445,14 @@ nm_setting_wireless_security_class_init (NMSettingWirelessSecurityClass *setting * in the list. For maximum compatibility leave this property empty. Each * list element may be one of "wep40", "wep104", "tkip", or "ccmp". **/ + /* ---ifcfg-rh--- + * property: group + * variable: CIPHER_GROUP(+) + * values: CCMP, TKIP, WEP40, WEP104 + * description: Restrict group/broadcast encryption algorithms, specified as a space + * separated list. + * ---end--- + */ g_object_class_install_property (object_class, PROP_GROUP, g_param_spec_boxed (NM_SETTING_WIRELESS_SECURITY_GROUP, "", "", @@ -1420,6 +1466,12 @@ nm_setting_wireless_security_class_init (NMSettingWirelessSecurityClass *setting * The login username for legacy LEAP connections (ie, key-mgmt = * "ieee8021x" and auth-alg = "leap"). **/ + /* ---ifcfg-rh--- + * property: leap-username + * variable: IEEE_8021X_IDENTITY(+) + * description: Login name for LEAP. + * ---end--- + */ g_object_class_install_property (object_class, PROP_LEAP_USERNAME, g_param_spec_string (NM_SETTING_WIRELESS_SECURITY_LEAP_USERNAME, "", "", @@ -1433,6 +1485,12 @@ nm_setting_wireless_security_class_init (NMSettingWirelessSecurityClass *setting * Index 0 WEP key. This is the WEP key used in most networks. See the * "wep-key-type" property for a description of how this key is interpreted. **/ + /* ---ifcfg-rh--- + * property: wep-key0 + * variable: KEY1, KEY_PASSPHRASE1(+) + * description: The first WEP key (used in most networks). See also DEFAULTKEY for key index. + * ---end--- + */ g_object_class_install_property (object_class, PROP_WEP_KEY0, g_param_spec_string (NM_SETTING_WIRELESS_SECURITY_WEP_KEY0, "", "", @@ -1447,6 +1505,12 @@ nm_setting_wireless_security_class_init (NMSettingWirelessSecurityClass *setting * Index 1 WEP key. This WEP index is not used by most networks. See the * "wep-key-type" property for a description of how this key is interpreted. **/ + /* ---ifcfg-rh--- + * property: wep-key1 + * variable: KEY2, KEY_PASSPHRASE2(+) + * description: WEP key with index 1. See also DEFAULTKEY for key index. + * ---end--- + */ g_object_class_install_property (object_class, PROP_WEP_KEY1, g_param_spec_string (NM_SETTING_WIRELESS_SECURITY_WEP_KEY1, "", "", @@ -1461,6 +1525,12 @@ nm_setting_wireless_security_class_init (NMSettingWirelessSecurityClass *setting * Index 2 WEP key. This WEP index is not used by most networks. See the * "wep-key-type" property for a description of how this key is interpreted. **/ + /* ---ifcfg-rh--- + * property: wep-key2 + * variable: KEY3, KEY_PASSPHRASE3(+) + * description: WEP key with index 2. See also DEFAULTKEY for key index. + * ---end--- + */ g_object_class_install_property (object_class, PROP_WEP_KEY2, g_param_spec_string (NM_SETTING_WIRELESS_SECURITY_WEP_KEY2, "", "", @@ -1475,6 +1545,12 @@ nm_setting_wireless_security_class_init (NMSettingWirelessSecurityClass *setting * Index 3 WEP key. This WEP index is not used by most networks. See the * "wep-key-type" property for a description of how this key is interpreted. **/ + /* ---ifcfg-rh--- + * property: wep-key3 + * variable: KEY4, KEY_PASSPHRASE4(+) + * description: WEP key with index 3. See also DEFAULTKEY for key index. + * ---end--- + */ g_object_class_install_property (object_class, PROP_WEP_KEY3, g_param_spec_string (NM_SETTING_WIRELESS_SECURITY_WEP_KEY3, "", "", @@ -1490,6 +1566,12 @@ nm_setting_wireless_security_class_init (NMSettingWirelessSecurityClass *setting * #NMSettingWirelessSecurity:wep-key1, #NMSettingWirelessSecurity:wep-key2, * and #NMSettingWirelessSecurity:wep-key3 properties. **/ + /* ---ifcfg-rh--- + * property: wep-key-flags + * variable: WEP_KEY_FLAGS(+) + * description: Password flags for KEY<i>, KEY_PASSPHRASE<i> password. + * ---end--- + */ g_object_class_install_property (object_class, PROP_WEP_KEY_FLAGS, g_param_spec_flags (NM_SETTING_WIRELESS_SECURITY_WEP_KEY_FLAGS, "", "", @@ -1508,6 +1590,12 @@ nm_setting_wireless_security_class_init (NMSettingWirelessSecurityClass *setting * WPA passphrase, and is hashed to derive the actual WPA-PSK used when * connecting to the Wi-Fi network. **/ + /* ---ifcfg-rh--- + * property: psk + * variable: WPA_PSK + * description: Pre-Shared-Key for WPA networks. + * ---end--- + */ g_object_class_install_property (object_class, PROP_PSK, g_param_spec_string (NM_SETTING_WIRELESS_SECURITY_PSK, "", "", @@ -1522,6 +1610,13 @@ nm_setting_wireless_security_class_init (NMSettingWirelessSecurityClass *setting * Flags indicating how to handle the #NMSettingWirelessSecurity:psk * property. **/ + /* ---ifcfg-rh--- + * property: psk-flags + * variable: WPA_PSK_FLAGS(+) + * description: Password flags for WPA_PSK_FLAGS. + * example: WPA_PSK_FLAGS=user + * ---end--- + */ g_object_class_install_property (object_class, PROP_PSK_FLAGS, g_param_spec_flags (NM_SETTING_WIRELESS_SECURITY_PSK_FLAGS, "", "", @@ -1536,6 +1631,13 @@ nm_setting_wireless_security_class_init (NMSettingWirelessSecurityClass *setting * The login password for legacy LEAP connections (ie, key-mgmt = * "ieee8021x" and auth-alg = "leap"). **/ + /* ---ifcfg-rh--- + * property: leap-password + * variable: IEEE_8021X_PASSWORD(+) + * description: Password for LEAP. It can also go to "key-" + * lookaside file, or it can be owned by a secret agent. + * ---end--- + */ g_object_class_install_property (object_class, PROP_LEAP_PASSWORD, g_param_spec_string (NM_SETTING_WIRELESS_SECURITY_LEAP_PASSWORD, "", "", @@ -1550,6 +1652,12 @@ nm_setting_wireless_security_class_init (NMSettingWirelessSecurityClass *setting * Flags indicating how to handle the * #NMSettingWirelessSecurity:leap-password property. **/ + /* ---ifcfg-rh--- + * property: leap-password-flags + * variable: IEEE_8021X_PASSWORD_FLAGS(+) + * description: Password flags for IEEE_8021X_PASSWORD_FLAGS. + * ---end--- + */ g_object_class_install_property (object_class, PROP_LEAP_PASSWORD_FLAGS, g_param_spec_flags (NM_SETTING_WIRELESS_SECURITY_LEAP_PASSWORD_FLAGS, "", "", @@ -1568,6 +1676,15 @@ nm_setting_wireless_security_class_init (NMSettingWirelessSecurityClass *setting * as a string and will be hashed using the de-facto MD5 method to derive * the actual WEP key. **/ + /* ---ifcfg-rh--- + * property: wep-key-type + * variable: KEY<i> or KEY_PASSPHRASE<i>(+) + * description: KEY is used for "key" type (10 or 26 hexadecimal characters, + * or 5 or 13 character string prefixed with "s:"). KEY_PASSPHRASE is used + * for WEP passphrases. + * example: KEY1=s:ahoj, KEY1=0a1c45bc02, KEY_PASSPHRASE1=mysupersecretkey + * ---end--- + */ g_object_class_install_property (object_class, PROP_WEP_KEY_TYPE, g_param_spec_enum (NM_SETTING_WIRELESS_SECURITY_WEP_KEY_TYPE, "", "", |