diff options
-rwxr-xr-x | build/PrintPath | 130 | ||||
-rwxr-xr-x | buildconf | 73 |
2 files changed, 190 insertions, 13 deletions
diff --git a/build/PrintPath b/build/PrintPath new file mode 100755 index 0000000000..2a2b48b634 --- /dev/null +++ b/build/PrintPath @@ -0,0 +1,130 @@ +#!/bin/sh +# +# Licensed to the Apache Software Foundation (ASF) under one or more +# contributor license agreements. See the NOTICE file distributed with +# this work for additional information regarding copyright ownership. +# The ASF licenses this file to You under the Apache License, Version 2.0 +# (the "License"); you may not use this file except in compliance with +# the License. You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# +# +# Look for program[s] somewhere in $PATH. +# +# Options: +# -s +# Do not print out full pathname. (silent) +# -pPATHNAME +# Look in PATHNAME instead of $PATH +# +# Usage: +# PrintPath [-s] [-pPATHNAME] program [program ...] +# +# Initially written by Jim Jagielski for the Apache configuration mechanism +# (with kudos to Kernighan/Pike) + +## +# Some "constants" +## +pathname=$PATH +echo="yes" + +## +# Find out what OS we are running for later on +## +os=`(uname) 2>/dev/null` + +## +# Parse command line +## +for args in $* +do + case $args in + -s ) echo="no" ;; + -p* ) pathname="`echo $args | sed 's/^..//'`" ;; + * ) programs="$programs $args" ;; + esac +done + +## +# Now we make the adjustments required for OS/2 and everyone +# else :) +# +# First of all, all OS/2 programs have the '.exe' extension. +# Next, we adjust PATH (or what was given to us as PATH) to +# be whitespace separated directories. +# Finally, we try to determine the best flag to use for +# test/[] to look for an executable file. OS/2 just has '-r' +# but with other OSs, we do some funny stuff to check to see +# if test/[] knows about -x, which is the prefered flag. +## + +if [ "x$os" = "xOS/2" ] +then + ext=".exe" + pathname=`echo -E $pathname | + sed 's/^;/.;/ + s/;;/;.;/g + s/;$/;./ + s/;/ /g + s/\\\\/\\//g' ` + test_exec_flag="-r" +else + ext="" # No default extensions + pathname=`echo $pathname | + sed 's/^:/.:/ + s/::/:.:/g + s/:$/:./ + s/:/ /g' ` + # Here is how we test to see if test/[] can handle -x + testfile="pp.t.$$" + + cat > $testfile <<ENDTEST +#!/bin/sh +if [ -x / ] || [ -x /bin ] || [ -x /bin/ls ]; then + exit 0 +fi +exit 1 +ENDTEST + + if `/bin/sh $testfile 2>/dev/null`; then + test_exec_flag="-x" + else + test_exec_flag="-r" + fi + rm -f $testfile +fi + +for program in $programs +do + for path in $pathname + do + if [ $test_exec_flag $path/${program}${ext} ] && \ + [ ! -d $path/${program}${ext} ]; then + if [ "x$echo" = "xyes" ]; then + echo $path/${program}${ext} + fi + exit 0 + fi + +# Next try without extension (if one was used above) + if [ "x$ext" != "x" ]; then + if [ $test_exec_flag $path/${program} ] && \ + [ ! -d $path/${program} ]; then + if [ "x$echo" = "xyes" ]; then + echo $path/${program} + fi + exit 0 + fi + fi + done +done +exit 1 + @@ -61,10 +61,12 @@ do done # -# Check to be sure that we have the srclib dependencies checked-out +# Check to be sure that we have the srclib dependencies checked-out, or that a +# working apr-config installation has been specified. # should_exit=0 +apr_config= # path to apr-config (empty if using a source directory) apr_found=0 apu_found=0 apr_major_version=2 @@ -76,6 +78,25 @@ do apr_src_dir=$dir apr_found=1 break + elif which "${dir}" >/dev/null 2>&1; then + # We're using apr-config. Do a sanity check. + apr_config=`which "${dir}"` + echo "testing apr-config executable: ${apr_config}" + + version=`"${apr_config}" --version` + version=`echo "${version}" | sed -n '/^[0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*$/p'` + + if [ -z "${version}" ]; then + echo "apr-config gave us an invalid --version" + apr_config= + continue + fi + + echo "using apr-config version ${version}" + apr_major_version=${version} # we'll make a real "major version" later + apr_src_dir=`"${apr_config}" --installbuilddir` + apr_found=1 + break fi done @@ -86,12 +107,18 @@ if [ $apr_found -lt 1 ]; then echo "Please refer to the documentation on APR in the httpd INSTALL file." echo "" should_exit=1 +elif [ -n "${apr_config}" ]; then + apr_major_version=`echo "${apr_major_version}" | sed 's/\..*//'` else apr_major_version=`grep "#define APR_MAJOR_VERSION" \ $apr_src_dir/include/apr_version.h | sed 's/[^0-9]//g'` fi -if [ $apr_major_version -lt 2 ] ; then +# Find APR-util. Note: if we're using apr-config, we can completely skip this, +# even if APR is version 1. That's because we only end up caring about +# find_apu.m4, which is not actually installed in the standard APR-util +# distribution to begin with. +if [ -z "${apr_config}" -a $apr_major_version -lt 2 ] ; then if test -z "$apu_src_dir"; then apu_src_dir=`echo $apr_src_dir | sed -e 's#/apr#/apr-util#g;'` apu_src_dir="$apu_src_dir `echo $apr_src_dir | sed -e 's#/apr#/aprutil#;g'`" @@ -171,23 +198,43 @@ if [ $apr_major_version -lt 2 ] ; then fi echo copying build files -cp $apr_src_dir/build/config.guess $apr_src_dir/build/config.sub \ - $apr_src_dir/build/PrintPath $apr_src_dir/build/apr_common.m4 \ - $apr_src_dir/build/find_apr.m4 build -if [ $apr_major_version -lt 2 ] ; then - cp $apu_src_dir/build/find_apu.m4 build +if [ -n "${apr_config}" ]; then + # If we're using apr-config, we switch things up a little bit: + # - use automake's config.* scripts instead of APR's + # - use the included PrintPath instead of copying from APR + # - assume find_apu.m4 is also in APR's --installbuilddir + + # Figure out where to copy config.* from. + automake=${AUTOMAKE:-automake} + am_libdir=`"${automake}" --print-libdir` + cp "${am_libdir}/config.guess" "${am_libdir}/config.sub" build + + # Remember that in this case, $apr_src_dir points to the build directory. + cp "$apr_src_dir/apr_common.m4" "$apr_src_dir/find_apr.m4" build + if [ $apr_major_version -lt 2 ] ; then + cp "$apr_src_dir/find_apu.m4" build + fi +else + cp $apr_src_dir/build/config.guess $apr_src_dir/build/config.sub \ + $apr_src_dir/build/PrintPath $apr_src_dir/build/apr_common.m4 \ + $apr_src_dir/build/find_apr.m4 build + if [ $apr_major_version -lt 2 ] ; then + cp $apu_src_dir/build/find_apu.m4 build + fi fi # Remove any libtool files so one can switch between libtool 1.3 # and libtool 1.4 by simply rerunning the buildconf script. (cd build ; rm -f ltconfig ltmain.sh) -# Optionally copy libtool-1.3.x files -if [ -f $apr_src_dir/build/ltconfig ]; then - cp $apr_src_dir/build/ltconfig build -fi -if [ -f $apr_src_dir/build/ltmain.sh ]; then - cp $apr_src_dir/build/ltmain.sh build +if [ -z "${apr_config}" ]; then + # Optionally copy libtool-1.3.x files + if [ -f $apr_src_dir/build/ltconfig ]; then + cp $apr_src_dir/build/ltconfig build + fi + if [ -f $apr_src_dir/build/ltmain.sh ]; then + cp $apr_src_dir/build/ltmain.sh build + fi fi echo rebuilding $config_h_in |