AX_ENABLE_BUILDDIR: Renamed variable HOST to BUILD.

The patch universally replaces "host" with "build" and "HOST"
with "BUILD". The rationale is that typically the user wishes to
segregate builds based upon the BUILD target rather than the
configuration HOST type. Now that these host and build variables
are treated as more fully distinct in Autoconf, it makes sense to
honor this distinction.

1 files changed, 25 insertions, 24 deletions

diff --git a/m4/ax_enable_builddir.m4 b/m4/ax_enable_builddir.m4
index 88c3eaf..df99613 100644
--- a/m4/ax_enable_builddir.m4
+++ b/m4/ax_enable_builddir.m4
@@ -13,7 +13,7 @@
 #
 #   Defaults:
 #
-#     $1 = $host (overridden with $HOST)
+#     $1 = $build (overridden with $BUILD)
 #     $2 = Makefile.mk
 #     $3 = -all
 #
@@ -21,15 +21,15 @@
 #   default toplevel srcdir Makefile from the information found in the
 #   created toplevel builddir Makefile. It just copies the variables
 #   and rule-targets, each extended with a default rule-execution that
-#   recurses into the build directory of the current "HOST". You can
+#   recurses into the build directory of the current "BUILD". You can
 #   override the auto-dection through `config.guess` and build-time of
 #   course, as in
 #
-#     make HOST=i386-mingw-cross
+#     make BUILD=i386-mingw-cross
 #
 #   which can of course set at configure time as well using
 #
-#     configure --host=i386-mingw-cross
+#     configure --build=i386-mingw-cross
 #
 #   After the default has been created, additional rules can be
 #   appended that will not just recurse into the subdirectories and
@@ -37,10 +37,10 @@
 #   read from the $2 = Makefile.mk file
 #
 #   The automatic rules are usually scanning the toplevel Makefile for
-#   lines like '#### $host |$builddir' to recognize the place where to
+#   lines like '#### $build |$builddir' to recognize the place where to
 #   recurse into. Usually, the last one is the only one used. However,
 #   almost all targets have an additional "*-all" rule which makes the
-#   script to recurse into _all_ variants of the current HOST (!!)
+#   script to recurse into _all_ variants of the current BUILD (!!)
 #   setting. The "-all" suffix can be overriden for the macro as well.
 #
 #   a special rule is only given for things like "dist" that will copy
@@ -49,11 +49,12 @@
 #
 # LAST MODIFICATION
 #
-#   2007-02-01
+#   2007-08-04
 #
 # COPYLEFT
 #
 #   Copyright (c) 2007 Guido U. Draheim <guidod@gmx.de>
+#   Copyright (c) 2007 Julian C. Cummings <cummings@cacr.caltech.edu>
 #
 #   This program is free software; you can redistribute it and/or
 #   modify it under the terms of the GNU General Public License as
@@ -86,7 +87,7 @@
 #   modified version as well.
 
 AC_DEFUN([AX_ENABLE_BUILDDIR],[
-AC_REQUIRE([AC_CANONICAL_HOST])[]dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])[]dnl
 AC_REQUIRE([AX_CONFIGURE_ARGS])[]dnl
 AC_BEFORE([$0],[AM_INIT_AUTOMAKE])dnl
 AS_VAR_PUSHDEF([SUB],[ax_enable_builddir])dnl
@@ -200,11 +201,11 @@ all-configured : all[]_ALL
 dnl dist-all exists... and would make for dist-all-all
 /[]_ALL[]_ALL/d
 /^.*[[=]]/!a\\
-	@ HOST="\$(HOST)\" \\\\\\
-	; test ".\$\$HOST" = "." && HOST=$x sh $AUX/config.guess $x \\\\\\
-	; BUILD=$x grep "^#### \$\$HOST " Makefile | sed -e 's/.*|//' $x \\\\\\
+	@ BUILD="\$(BUILD)\" \\\\\\
+	; test ".\$\$BUILD" = "." && BUILD=$x sh $AUX/config.guess $x \\\\\\
+	; BUILD=$x grep "^#### \$\$BUILD " Makefile | sed -e 's/.*|//' $x \\\\\\
 	; use=$x basename "\$\@" _ALL $x; n=$x echo \$\$BUILD | wc -w $x \\\\\\
-	; echo "MAKE \$\$HOST : \$\$n * \$\@"; if test "\$\$n" = "0" ; then : \\\\\\
+	; echo "MAKE \$\$BUILD : \$\$n * \$\@"; if test "\$\$n" = "0" ; then : \\\\\\
 	; BUILD=$x grep "^####.*|" Makefile |tail -1| sed -e 's/.*|//' $x ; fi \\\\\\
 	; test ".\$\$BUILD" = "." && BUILD="." \\\\\\
 	; test "\$\$use" = "\$\@" && BUILD=$x echo "\$\$BUILD" | tail -1 $x \\\\\\
@@ -212,11 +213,11 @@ dnl dist-all exists... and would make for dist-all-all
 	; (cd "\$\$i" && test ! -f configure && \$(MAKE) \$\$use) || exit; done
 dnl special rule add-on: "dist" copies the tarball to $(PUB). (source tree)
 /dist[]_ALL *:/a\\
-	@ HOST="\$(HOST)\" \\\\\\
-	; test ".\$\$HOST" = "." && HOST=$x sh $AUX/config.guess $x \\\\\\
-	; BUILD=$x grep "^#### \$\$HOST " Makefile | sed -e 's/.*|//' $x \\\\\\
+	@ BUILD="\$(BUILD)\" \\\\\\
+	; test ".\$\$BUILD" = "." && BUILD=$x sh $AUX/config.guess $x \\\\\\
+	; BUILD=$x grep "^#### \$\$BUILD " Makefile | sed -e 's/.*|//' $x \\\\\\
 	; found=$x echo \$\$BUILD | wc -w $x \\\\\\
-	; echo "MAKE \$\$HOST : \$\$found \$(PACKAGE)-\$(VERSION).tar.*" \\\\\\
+	; echo "MAKE \$\$BUILD : \$\$found \$(PACKAGE)-\$(VERSION).tar.*" \\\\\\
 	; if test "\$\$found" = "0" ; then : \\\\\\
 	; BUILD=$x grep "^#### .*|" Makefile |tail -1| sed -e 's/.*|//' $x \\\\\\
 	; fi ; for i in \$\$BUILD ; do test ".\$\$i" = "." && continue \\\\\\
@@ -224,11 +225,11 @@ dnl special rule add-on: "dist" copies the tarball to $(PUB). (source tree)
 	; do test -f "\$\$f" && mv "\$\$f" \$(PUB). ; done ; break ; done
 dnl special rule add-on: "distclean" removes all local builddirs completely
 /distclean[]_ALL *:/a\\
-	@ HOST="\$(HOST)\" \\\\\\
-	; test ".\$\$HOST" = "." && HOST=$x sh $AUX/config.guess $x \\\\\\
+	@ BUILD="\$(BUILD)\" \\\\\\
+	; test ".\$\$BUILD" = "." && BUILD=$x sh $AUX/config.guess $x \\\\\\
 	; BUILD=$x grep "^#### .*| *\\./" Makefile | sed -e 's/.*|//' $x \\\\\\
 	; use=$x basename "\$\@" _ALL $x; n=$x echo \$\$BUILD | wc -w $x \\\\\\
-	; echo "MAKE \$\$HOST : \$\$n * \$\@ (all local builds)" \\\\\\
+	; echo "MAKE \$\$BUILD : \$\$n * \$\@ (all local builds)" \\\\\\
 	; test ".\$\$BUILD" = "." && BUILD="." \\\\\\
 	; for i in \$\$BUILD ; do test ".\$\$i" = "." && continue \\\\\\
 	; echo "# rm -r \$\$i"; done ; echo "# (sleep 3)" ; sleep 3 \\\\\\
@@ -245,13 +246,13 @@ _EOF
       # sanity check
       if grep '^; echo "MAKE ' $SRC/Makefile >/dev/null ; then
         AC_MSG_NOTICE([buggy sed found - it deletes tab in "a" text parts])
-        $SED -e '/^@ HOST=/s/^/	/' -e '/^; /s/^/	/' $SRC/Makefile \
+        $SED -e '/^@ BUILD=/s/^/	/' -e '/^; /s/^/	/' $SRC/Makefile \
           >$SRC/Makefile~
         (test -s $SRC/Makefile~ && mv $SRC/Makefile~ $SRC/Makefile) 2>/dev/null
       fi
     else
       xxxx="\\#\\#\\#\\#"
-      # echo "/^$xxxx *$ax_enable_builddir_host /d" >$tmp/conftemp.sed
+      # echo "/^$xxxx *$ax_enable_builddir_build /d" >$tmp/conftemp.sed
       echo "s!^$xxxx [[^|]]* | *$SUB *\$!$xxxx ...... $SUB!" >$tmp/conftemp.sed
       $SED -f "$tmp/conftemp.sed" "$SRC/Makefile" >$tmp/mkfile.tmp
         cp "$tmp/conftemp.sed" "$SRC/makefiles.sed~"         ## DEBUGGING
@@ -264,9 +265,9 @@ _EOF
         mv "$tmp/mkfile.tmp" "$SRC/Makefile"
       fi
     fi
-    AC_MSG_NOTICE([build in $SUB (HOST=$ax_enable_builddir_host)])
+    AC_MSG_NOTICE([build in $SUB (BUILD=$ax_enable_builddir_build)])
     xxxx="####"
-    echo "$xxxx" "$ax_enable_builddir_host" "|$SUB" >>$SRC/Makefile
+    echo "$xxxx" "$ax_enable_builddir_build" "|$SUB" >>$SRC/Makefile
   fi
 popdef([END])dnl
 AS_VAR_POPDEF([SED])dnl
@@ -276,7 +277,7 @@ AS_VAR_POPDEF([TOP])dnl
 AS_VAR_POPDEF([SUB])dnl
 ],[dnl
 ax_enable_builddir_srcdir="$srcdir"                    # $srcdir
-ax_enable_builddir_host="$HOST"                        # $HOST / $host
+ax_enable_builddir_build="$BUILD"                      # $BUILD / $build
 ax_enable_builddir_version="$VERSION"                  # $VERSION
 ax_enable_builddir_package="$PACKAGE"                  # $PACKAGE
 ax_enable_builddir_auxdir="$ax_enable_builddir_auxdir" # $AUX