path: root/Makefile.am

## Process this file with automake to create Makefile.in

## Makefile for Automake.

# Copyright (C) 1995-2012 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

## Might be updated later.
CLEANFILES =
DISTCLEANFILES =
MAINTAINERCLEANFILES =
EXTRA_DIST =

## ------------ ##
##  Top level.  ##
## ------------ ##

# We want a handful of substitutions to be fully-expanded by make;
# then use config.status to substitute the remainder where a single
# expansion is sufficient.  We use a funny notation here to avoid
# configure substitutions in our text.
do_subst = ( sed \
  -e "s,[@]configure_input[@],Generated from $$in; do not edit by hand.,g" \
  -e 's,[@]datadir[@],$(datadir),g' \
  -e 's,[@]amdir[@],$(amdir),g' \
  -e 's,[@]bindir[@],$(bindir),g' \
  -e 's,[@]docdir[@],$(docdir),g' \
  -e 's,[@]pkgvdatadir[@],$(pkgvdatadir),g' \
  -e 's,[@]scriptdir[@],$(scriptdir),g' \
  -e 's,[@]automake_acdir[@],$(automake_acdir),g' \
  -e 's,[@]system_acdir[@],$(system_acdir),g' \
## Hack to avoid a spurious substitution in the Automake script (part 1).
  -e 's,[@]am__isrc[@],!!@!!am__isrc!!@!!,g' \
  | $(SHELL) ./config.status --file=- \
## Hack to avoid a spurious substitution in the Automake script (part 2).
  | sed -e 's,!!@!!am__isrc!!@!!,@''am__isrc@,g' \
  )

# Generated  files shouldn't contain unexpanded '@substitutions@', and
# should be made read-only, to prevent them from being edited by mistake
# instead of the file the are generated from.
generated_file_finalize = $(AM_V_at) \
  if LC_ALL=C grep '@[a-zA-Z0-9_][a-zA-Z0-9_]*@' $@-t; then \
    echo "$@ contains unexpanded substitution (see lines above)"; \
    exit 1; \
  fi; \
  chmod a-w $@-t && mv -f $@-t $@

bin_SCRIPTS = automake aclocal

CLEANFILES += $(bin_SCRIPTS)
AUTOMAKESOURCES = automake.in aclocal.in

TAGS_FILES = $(AUTOMAKESOURCES)

EXTRA_DIST += \
  $(AUTOMAKESOURCES) \
  bootstrap.sh \
  GNUmakefile \
  syntax-checks.mk \
  HACKING

## Make versioned links.  We only run the transform on the root name;
## then we make a versioned link with the transformed base name.  This
## seemed like the most reasonable approach.
install-exec-hook:
	@$(POST_INSTALL)
	@for p in $(bin_SCRIPTS); do \
	  f="`echo $$p|sed '$(transform)'`"; \
	  fv="$$f-$(APIVERSION)"; \
	  rm -f "$(DESTDIR)$(bindir)/$$fv"; \
	  echo " $(LN) '$(DESTDIR)$(bindir)/$$f' '$(DESTDIR)$(bindir)/$$fv'"; \
	  $(LN) "$(DESTDIR)$(bindir)/$$f" "$(DESTDIR)$(bindir)/$$fv"; \
	done

uninstall-hook:
	@for p in $(bin_SCRIPTS); do \
	  f="`echo $$p|sed '$(transform)'`"; \
	  fv="$$f-$(APIVERSION)"; \
	  rm -f "$(DESTDIR)$(bindir)/$$fv"; \
	done

## These files depend on Makefile so they are rebuilt if $(VERSION),
## $(datadir) or other do_subst'ituted variables change.
automake: automake.in
aclocal: aclocal.in
automake aclocal: Makefile
	$(AM_V_at)rm -f $@ $@-t
	$(AM_V_GEN)in=$@.in; $(do_subst) <$(srcdir)/$@.in >$@-t
## We can't use '$(generated_file_finalize)' here, because currently
## Automake contains occurrences of unexpanded @substitutions@ in
## comments, and that is perfectly legit.
	$(AM_V_at)chmod a+x,a-w $@-t && mv -f $@-t $@

## The master location for INSTALL is lib/INSTALL.
## This is where "make fetch" will install new versions.
## Make sure we also update this copy.
INSTALL: lib/INSTALL
	$(AM_V_GEN)cp $(srcdir)/lib/INSTALL $@

# We don't use the default name for the autom4te cache directory,
# so we need this.
maintainer-clean-local:
	rm -rf .autom4te.cache


## -------------------------------------------------------------------- ##
##  Auxiliary scripts and files for use with "automake --add-missing".  ##
## -------------------------------------------------------------------- ##

dist_pkgvdata_DATA = \
  lib/COPYING \
  lib/INSTALL \
  lib/texinfo.tex

## These must all be executable when installed.  However, if we use
## _SCRIPTS, then the program transform will be applied, which is not
## what we want.  So we make them executable by hand.
dist_script_DATA = \
  lib/config.guess \
  lib/config.sub \
  lib/install-sh \
  lib/mdate-sh \
  lib/missing \
  lib/mkinstalldirs \
  lib/ylwrap \
  lib/depcomp \
  lib/compile \
  lib/py-compile \
  lib/ar-lib \
  lib/test-driver \
  lib/tap-driver.sh \
  lib/tap-driver.pl

install-data-hook:
	@$(POST_INSTALL)
	@for f in $(dist_script_DATA); do echo $$f; done \
	  | sed 's,^lib/,,' \
	  | ( st=0; \
	      while read f; do \
	        echo " chmod +x '$(DESTDIR)$(scriptdir)/$$f'"; \
	        chmod +x "$(DESTDIR)$(scriptdir)/$$f" || st=1; \
	      done; \
	      exit $$st )

installcheck-local: installcheck-executable-scripts
installcheck-executable-scripts:
	@for f in $(dist_script_DATA); do echo $$f; done \
	  | sed 's,^lib/,,' \
	  | while read f; do \
	      path="$(pkgvdatadir)/$$f"; \
	      test -x "$$path" || echo $$path; \
	    done \
	  | sed 's/$$/: not executable/' \
	  | grep . 1>&2 && exit 1; exit 0


## ---------------------------------------------------- ##
##  Private perl modules used by automake and aclocal.  ##
## ---------------------------------------------------- ##

perllibdir = $(pkgvdatadir)/Automake
dist_perllib_DATA = \
  lib/Automake/ChannelDefs.pm \
  lib/Automake/Channels.pm \
  lib/Automake/Condition.pm \
  lib/Automake/Configure_ac.pm \
  lib/Automake/DisjConditions.pm \
  lib/Automake/FileUtils.pm \
  lib/Automake/General.pm \
  lib/Automake/Getopt.pm \
  lib/Automake/Item.pm \
  lib/Automake/ItemDef.pm \
  lib/Automake/Location.pm \
  lib/Automake/Options.pm \
  lib/Automake/Rule.pm \
  lib/Automake/RuleDef.pm \
  lib/Automake/Variable.pm \
  lib/Automake/VarDef.pm \
  lib/Automake/Version.pm \
  lib/Automake/XFile.pm \
  lib/Automake/Wrap.pm

nodist_perllib_DATA = lib/Automake/Config.pm
CLEANFILES += $(nodist_perllib_DATA)

lib/Automake/Config.pm: lib/Automake/Config.in Makefile
	$(AM_V_at)rm -f $@ $@-t
	$(AM_V_at)test -d lib/Automake || $(MKDIR_P) lib/Automake
	$(AM_V_GEN)in=Config.in \
	  && $(do_subst) <$(srcdir)/lib/Automake/Config.in >$@-t
	$(generated_file_finalize)
EXTRA_DIST += lib/Automake/Config.in


## --------------------- ##
##  Makefile fragments.  ##
## --------------------- ##

dist_am_DATA = \
  lib/am/check.am \
  lib/am/check2.am \
  lib/am/clean-hdr.am \
  lib/am/clean.am \
  lib/am/compile.am \
  lib/am/configure.am \
  lib/am/data.am \
  lib/am/dejagnu.am \
  lib/am/depend.am \
  lib/am/depend2.am \
  lib/am/distdir.am \
  lib/am/footer.am \
  lib/am/header-vars.am \
  lib/am/header.am \
  lib/am/install.am \
  lib/am/inst-vars.am \
  lib/am/java.am \
  lib/am/lang-compile.am \
  lib/am/lex.am \
  lib/am/library.am \
  lib/am/libs.am \
  lib/am/libtool.am \
  lib/am/lisp.am \
  lib/am/ltlib.am \
  lib/am/ltlibrary.am \
  lib/am/mans-vars.am \
  lib/am/mans.am \
  lib/am/program.am \
  lib/am/progs.am \
  lib/am/python.am \
  lib/am/remake-hdr.am \
  lib/am/scripts.am \
  lib/am/subdirs.am \
  lib/am/tags.am \
  lib/am/texi-vers.am \
  lib/am/texibuild.am \
  lib/am/texinfos.am \
  lib/am/vala.am \
  lib/am/yacc.am


## ------------------------------ ##
##  Automake-provided m4 macros.  ##
## ------------------------------ ##

dist_automake_ac_DATA = \
  m4/amversion.m4 \
  m4/ar-lib.m4 \
  m4/as.m4 \
  m4/auxdir.m4 \
  m4/cond.m4 \
  m4/cond-if.m4 \
  m4/depend.m4 \
  m4/depout.m4 \
  m4/dmalloc.m4 \
  m4/extra-recurs.m4 \
  m4/gcj.m4 \
  m4/init.m4 \
  m4/install-sh.m4 \
  m4/lead-dot.m4 \
  m4/lex.m4 \
  m4/lispdir.m4 \
  m4/maintainer.m4 \
  m4/make.m4 \
  m4/minuso.m4 \
  m4/missing.m4 \
  m4/mkdirp.m4 \
  m4/options.m4 \
  m4/protos.m4 \
  m4/python.m4 \
  m4/runlog.m4 \
  m4/sanity.m4 \
  m4/silent.m4 \
  m4/strip.m4 \
  m4/substnot.m4 \
  m4/tar.m4 \
  m4/upc.m4 \
  m4/vala.m4

automake_internal_acdir = $(automake_acdir)/internal
dist_automake_internal_ac_DATA = m4/internal/ac-config-macro-dirs.m4

dist_system_ac_DATA = m4/acdir/README

# We build amversion.m4 here, instead of from config.status,
# because config.status is rerun each time one of configure's
# dependencies change and amversion.m4 happens to be a configure
# dependency.  configure and amversion.m4 would be rebuilt in
# loop otherwise.
# Use '$(top_srcdir)/m4' for the benefit of non-GNU makes: this is
# how amversion.m4 appears in our dependencies.
$(top_srcdir)/m4/amversion.m4: $(srcdir)/configure.ac $(srcdir)/m4/amversion.in
	$(AM_V_at)rm -f $@-t $@
	$(AM_V_GEN)in=amversion.in \
	  && $(do_subst) <$(srcdir)/m4/amversion.in >$@-t
	$(generated_file_finalize)
EXTRA_DIST += m4/amversion.in


## ------------ ##
##  Testsuite.  ##
## ------------ ##

# Run the tests with a proper shell detected at configure time.
LOG_COMPILER = $(AM_TEST_RUNNER_SHELL)

TEST_EXTENSIONS = .pl .sh .tap
SH_LOG_COMPILER = $(LOG_COMPILER)
TAP_LOG_COMPILER = $(LOG_COMPILER)
PL_LOG_COMPILER = $(PERL)
AM_PL_LOG_FLAGS = -Mstrict -I $(builddir)/lib -I $(srcdir)/lib -w

TAP_LOG_DRIVER = AM_TAP_AWK='$(AWK)' $(SHELL) $(srcdir)/lib/tap-driver.sh

AM_TAP_LOG_DRIVER_FLAGS = --merge

EXTRA_DIST += t/README t/ax/is t/ax/is_newest

TESTS = ## Will be updated later.

# Some testsuite-influential variables should be overridable from the
# test scripts, but not from the environment.
# Keep this in sync with the similar list in 'runtest.in'.
AM_TESTS_ENVIRONMENT = \
  for v in \
    required \
    am_test_protocol \
    am_serial_tests \
    am_test_prefer_config_shell \
    am_original_AUTOMAKE \
    am_original_ACLOCAL \
    am_test_lib_sourced \
    test_lib_sourced \
  ; do \
    eval test x"\$${$$v}" = x || unset $$v; \
  done;
# We want warning messages and explanations for skipped tests to go to
# the console if possible, so set up 'stderr_fileno_' properly.
AM_TESTS_FD_REDIRECT = 9>&2
AM_TESTS_ENVIRONMENT += stderr_fileno_=9; export stderr_fileno_;

# For sourcing of extra "shell libraries" by our test scripts.  As per
# POSIX, sourcing a file with '.' will cause it to be looked up in $PATH
# in case it is given with a relative name containing no slashes.
AM_TESTS_ENVIRONMENT += \
  if test $(srcdir) != .; then \
    PATH='$(abs_srcdir)/t/ax'$(PATH_SEPARATOR)$$PATH; \
  fi; \
  PATH='$(abs_builddir)/t/ax'$(PATH_SEPARATOR)$$PATH; \
  export PATH;

# Hand-written tests.

include $(srcdir)/t/list-of-tests.mk

TESTS += $(handwritten_TESTS)
EXTRA_DIST += $(handwritten_TESTS)

# Automatically-generated tests wrapping hand-written ones.
# Also, automatically-computed dependencies for tests.

include $(srcdir)/t/testsuite-part.am

TESTS += $(generated_TESTS)
EXTRA_DIST += $(generated_TESTS)

$(srcdir)/t/testsuite-part.am:
	$(AM_V_at)rm -f t/testsuite-part.tmp $@
	$(AM_V_GEN)$(PERL) $(srcdir)/gen-testsuite-part \
	  --srcdir $(srcdir) > t/testsuite-part.tmp
	$(AM_V_at)chmod a-w t/testsuite-part.tmp
	$(AM_V_at)mv -f t/testsuite-part.tmp $@
EXTRA_DIST += gen-testsuite-part

## The dependecies declared here are not truly complete, but such
## completeness would cause more issues than it would solve.  See
## automake bug#11347.
$(generated_TESTS): $(srcdir)/gen-testsuite-part
$(srcdir)/t/testsuite-part.am: $(srcdir)/gen-testsuite-part Makefile.am

# Hand-written tests for stuff in 'contrib/'.
include $(srcdir)/contrib/t/local.am
TESTS += $(contrib_TESTS)
EXTRA_DIST += $(contrib_TESTS)

# Static dependencies valid for each test case (also further
# extended later).  Note that use 'noinst_' rather than 'check_'
# as the prefix, because we really want them to be built by
# "make all".  This makes it easier to run the test cases by
# hand after having simply configured and built the package.

nodist_noinst_SCRIPTS = \
  t/wrap/aclocal-$(APIVERSION) \
  t/wrap/automake-$(APIVERSION)

dist_noinst_DATA = \
  t/ax/test-init.sh \
  t/ax/test-lib.sh \
  t/ax/am-test-lib.sh \
  t/ax/tap-functions.sh

# Few more static dependencies.
t/distcheck-missing-m4.log: t/ax/distcheck-hook-m4.am
t/distcheck-outdated-m4.log: t/ax/distcheck-hook-m4.am
EXTRA_DIST += t/ax/distcheck-hook-m4.am

t/ax/test-defs.sh: t/ax/test-defs.in Makefile
	$(AM_V_at)rm -f $@ $@-t
	$(AM_V_at)$(MKDIR_P) t/ax
	$(AM_V_GEN)in=t/ax/test-defs.in \
	  && $(do_subst) <$(srcdir)/$$in >$@-t
	$(generated_file_finalize)
EXTRA_DIST += t/ax/test-defs.in
CLEANFILES += t/ax/test-defs.sh
nodist_noinst_DATA = t/ax/test-defs.sh

noinst_SCRIPTS = # Will be updated soon.

t/ax/shell-no-trail-bslash: t/ax/shell-no-trail-bslash.in Makefile
	$(AM_V_at)rm -f $@ $@-t
	$(AM_V_GEN)in=t/ax/shell-no-trail-bslash.in \
	  && $(MKDIR_P) t/ax \
	  && $(do_subst) <$(srcdir)/$$in >$@-t \
	  && chmod a+x $@-t
	$(generated_file_finalize)
EXTRA_DIST += t/ax/shell-no-trail-bslash.in
CLEANFILES += t/ax/shell-no-trail-bslash
noinst_SCRIPTS += t/ax/shell-no-trail-bslash

runtest: runtest.in Makefile
	$(AM_V_at)rm -f $@ $@-t
	$(AM_V_GEN)in=runtest.in \
	  && $(MKDIR_P) t/ax \
	  && $(do_subst) <$(srcdir)/runtest.in >$@-t \
	  && chmod a+x $@-t
	$(generated_file_finalize)
EXTRA_DIST += runtest.in
CLEANFILES += runtest
noinst_SCRIPTS += runtest

# If two test scripts have the same basename, they will end up sharing
# the same log file, leading to all sort of undefined and undesired
# behaviours.
check-no-repeated-test-name:
	@LC_ALL=C; export LC_ALL; \
	 lst='$(TEST_LOGS)'; for log in $$lst; do echo $$log; done \
	   | sort | uniq -c | awk '($$1 > 1) { print }' \
	   | sed 's/\.log$$//' | grep . >&2 \
	   && { \
	     echo $@: test names listed above are duplicated >&2; \
	     exit 1; \
	   }; :
check-local: check-no-repeated-test-name
.PHONY: check-no-repeated-test-name

# Check that our test cases are syntactically correct.
# See automake bug#11898.
check-tests-syntax:
	@st=0; \
	err () { echo "$@: $$*" >&2; st=1; }; \
## The user might do something like "make check TESTS=t/foo" or
## "make check TESTS_LOGS=t/foo.log" and expect (say) the test
## 't/foo.sh' to be run; this has worked well until today, and
## we want to continue supporting this use case.
	bases=`for log in : $(TEST_LOGS); do echo $$log; done \
	  | sed -e '/^:$$/d' -e 's/\.log$$//'`; \
	for bas in $$bases; do \
	  for suf in sh tap pl; do \
	    tst=$$bas.$$suf; \
## Emulate VPATH search.
	    if test -f $$tst; then \
	      break; \
	    elif test -f $(srcdir)/$$tst; then \
	      tst=$(srcdir)/$$tst; \
	      break; \
	    else \
	      tst=''; \
	    fi; \
	  done; \
	  test -n "$$tst" || err "couldn't find test '$$bas'"; \
## Don't check that perl tests are valid shell scripts!
	  test $$suf = pl && continue; \
	  $(AM_V_P) && echo " $(AM_TEST_RUNNER_SHELL) -n $$tst"; \
	  $(AM_TEST_RUNNER_SHELL) -n "$$tst" \
	    || err "test '$$tst' syntactically invalid"; \
	done; \
	exit $$st
check-local: check-tests-syntax
.PHONY: check-tests-syntax

# Recipes with a trailing backslash character (possibly followed by
# blank characters only) can cause spurious syntax errors with at
# least older bash versions (e.g., bash 2.05b), and can be potentially
# be unportable to other weaker shells.  Run the testsuite in a way
# that helps catching such problems in Automake-generated recipes.
# See automake bug#10436.
check-no-trailing-backslash-in-recipes:
	$(AM_V_at)$(MAKE) $(AM_MAKEFLAGS) check \
	  CONFIG_SHELL='$(abs_top_builddir)/t/ax/shell-no-trail-bslash'
.PHONY: check-no-trailing-backslash-in-recipes

## Checking the list of tests.
test_subdirs = t t/pm contrib/t
include $(srcdir)/t/CheckListOfTests.am

# Run the testsuite with the installed aclocal and automake.
installcheck-local: installcheck-testsuite
installcheck-testsuite:
	am_running_installcheck=yes $(MAKE) $(AM_MAKEFLAGS) check

# Performance tests.
.PHONY: perf
perf: all
	$(MAKE) $(AM_MAKEFLAGS) TEST_SUITE_LOG='$(PERF_TEST_SUITE_LOG)'	\
	                        TESTS='$(perf_TESTS)' check
PERF_TEST_SUITE_LOG = t/perf/test-suite.log
CLEANFILES += $(PERF_TEST_SUITE_LOG)
EXTRA_DIST += $(perf_TESTS)

clean-local: clean-local-check
.PHONY: clean-local-check
clean-local-check:
## Directories candidate to be test directories match this wildcard.
	@globs='t/*.dir t/*/*.dir */t/*.dir */t/*/*.dir'; \
## The 'nullglob' bash option is not portable, so use perl.
	dirs=`$(PERL) -e "print join(' ', glob('$$globs'));"` || exit 1; \
	if test -n "$$dirs"; then \
## Errors in find are acceptable, errors in rm are not.
	    find $$dirs -type d ! -perm -700 -exec chmod u+rwx {} ';'; \
	    echo " rm -rf $$dirs"; \
	    rm -rf $$dirs || exit 1; \
	fi


## ---------------- ##
##  Documentation.  ##
## ---------------- ##

info_TEXINFOS = doc/automake.texi doc/automake-history.texi
doc_automake_TEXINFOS = doc/fdl.texi
doc_automake_history_TEXINFOS = doc/fdl.texi

man1_MANS = \
  doc/aclocal.1 \
  doc/automake.1 \
  doc/aclocal-$(APIVERSION).1 \
  doc/automake-$(APIVERSION).1

$(man1_MANS): $(srcdir)/configure.ac

CLEANFILES += $(man1_MANS)
EXTRA_DIST += doc/help2man

update_mans = \
  $(AM_V_GEN): \
    && $(MKDIR_P) doc \
    && PATH="$(abs_builddir)/t/wrap$(PATH_SEPARATOR)$$PATH" \
    && export PATH \
    && $(PERL) $(srcdir)/doc/help2man --output=$@

doc/aclocal.1 doc/automake.1:
	$(AM_V_GEN): \
	  && $(MKDIR_P) doc \
	  && f=`echo $@ | sed 's|.*/||; s|\.1$$||; $(transform)'` \
	  && echo ".so man1/$$f-$(APIVERSION).1" > $@

doc/aclocal-$(APIVERSION).1: aclocal.in aclocal lib/Automake/Config.pm
	$(update_mans) aclocal-$(APIVERSION)
doc/automake-$(APIVERSION).1: automake.in automake lib/Automake/Config.pm
	$(update_mans) automake-$(APIVERSION)


## ---------------------------- ##
##  Example package "amhello".  ##
## ---------------------------- ##

amhello_sources = \
  doc/amhello/configure.ac \
  doc/amhello/Makefile.am \
  doc/amhello/README \
  doc/amhello/src/main.c \
  doc/amhello/src/Makefile.am

amhello_configury = \
  aclocal.m4 \
  autom4te.cache \
  Makefile.in \
  config.h.in \
  configure \
  depcomp \
  install-sh \
  missing \
  src/Makefile.in

dist_noinst_DATA += $(amhello_sources)
dist_doc_DATA = $(srcdir)/doc/amhello-1.0.tar.gz

# We depend on configure.ac so that we regenerate the tarball
# whenever the Automake version changes.
# aclocal-$(APIVERSION) and automake-$(APIVERSION) are generated by
# configure in 't/wrap'.
$(srcdir)/doc/amhello-1.0.tar.gz: $(amhello_sources) $(srcdir)/configure.ac
	$(AM_V_GEN): \
	  && PATH="$(abs_top_builddir)/t/wrap$(PATH_SEPARATOR)$$PATH" \
	  && export PATH \
	  && $(am__cd) $(srcdir)/doc/amhello \
	  && ACLOCAL=aclocal-$(APIVERSION) && export ACLOCAL \
	  && AUTOMAKE=automake-$(APIVERSION) && export AUTOMAKE \
	  && AUTOCONF='$(am_AUTOCONF)' && export AUTOCONF \
	  && AUTOM4TE='$(am_AUTOM4TE)' && export AUTOM4TE \
	  && AUTORECONF='$(am_AUTORECONF)' && export AUTORECONF \
	  && AUTOHEADER='$(am_AUTOHEADER)' && export AUTOHEADER \
	  && AUTOUPDATE='$(am_AUTOUPDATE)' && export AUTOUPDATE \
	  && $(am_AUTORECONF) -vfi \
	  && ./configure \
	  && $(MAKE) $(AM_MAKEFLAGS) distcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) distclean \
	  && rm -rf $(amhello_configury) \
	  && mv -f amhello-1.0.tar.gz ..


## ------------------------------------------------- ##
##  Third-party, obsolescent or experimental stuff.  ##
## ------------------------------------------------- ##

EXTRA_DIST += \
  contrib/check-html.am \
  contrib/multilib/README \
  contrib/multilib/config-ml.in \
  contrib/multilib/symlink-tree \
  contrib/multilib/multilib.am \
  contrib/multilib/multi.m4 \
  contrib/README


## --------------------------------------------------- ##
##  Older files, kept mostly for historical interest.  ##
## --------------------------------------------------- ##

EXTRA_DIST += \
  old/ChangeLog-tests \
  old/ChangeLog.96 \
  old/ChangeLog.98 \
  old/ChangeLog.00 \
  old/ChangeLog.01 \
  old/ChangeLog.02 \
  old/ChangeLog.03 \
  old/ChangeLog.04 \
  old/ChangeLog.09 \
  old/ChangeLog.11 \
  old/TODO


##########################################################################

## Everything past here is useful to the maintainer, but probably not
## to anybody else.

##########################################################################


## --------------------------------------------------------- ##
##  Automatic generation of the ChangeLog from git history.  ##
## --------------------------------------------------------- ##

gitlog_to_changelog_command = $(PERL) $(srcdir)/lib/gitlog-to-changelog
gitlog_to_changelog_fixes = $(srcdir)/.git-log-fix
gitlog_to_changelog_options = --amend=$(gitlog_to_changelog_fixes) \
                              --since='2011-12-28 00:00:00' \
                              --no-cluster --format '%s%n%n%b'

EXTRA_DIST += lib/gitlog-to-changelog
EXTRA_DIST += $(gitlog_to_changelog_fixes)

# When executed from a git checkout, generate the ChangeLog from the git
# history.  When executed from an extracted distribution tarball, just
# copy the distributed ChangeLog in the build directory (and if this
# fails, or if no distributed ChangeLog file is present, complain and
# give an error).
#
# We need the apparently useless dependency from another .PHONY target
# 'am--changelog-regen-hook' to work around a bug of Solaris make, which
# doesn't execute the recipe of a target named as an existing file, even
# if such target is declared '.PHONY' (yikes!)
#
.PHONY: am--changelog-regen-hook
am--changelog-regen-hook:
ChangeLog: am--changelog-regen-hook
	$(AM_V_GEN)set -e; set -u; \
## The ChangeLog should be regenerated unconditionally when working from
## checked-out sources; otherwise, if we're working from a distribution
## tarball, we expect the ChangeLog to be distributed, so check that it
## is indeed present in the source directory.
	if test -d $(srcdir)/.git; then \
	  rm -f $@-t \
	    && $(gitlog_to_changelog_command) \
	       $(gitlog_to_changelog_options) >$@-t \
	    && chmod a-w $@-t \
	    && mv -f $@-t $@ \
	    || exit 1; \
	elif test ! -f $(srcdir)/$@; then \
	  echo "Source tree is not a git checkout, and no pre-existent" \
	       "$@ file has been found there" >&2; \
	  exit 1; \
	fi


## --------------------------- ##
##  Perl coverage statistics.  ##
## --------------------------- ##

PERL_COVERAGE_DB = $(abs_top_builddir)/cover_db
PERL_COVERAGE_FLAGS = -MDevel::Cover=-db,$(PERL_COVERAGE_DB),-silent,on,-summary,off
PERL_COVER = cover

check-coverage-run recheck-coverage-run: all
	$(mkinstalldirs) $(PERL_COVERAGE_DB)
	PERL5OPT="$$PERL5OPT $(PERL_COVERAGE_FLAGS)"; export PERL5OPT; \
	WANT_NO_THREADS=yes; export WANT_NO_THREADS; unset AUTOMAKE_JOBS; \
	$(MAKE) $(AM_MAKEFLAGS) `echo $@ | sed 's/-coverage-run//'`

check-coverage-report:
	@if test ! -d "$(PERL_COVERAGE_DB)"; then \
	  echo "No coverage database found in '$(PERL_COVERAGE_DB)'." >&2; \
	  echo "Please run \"make check-coverage\" first" >&2; \
	  exit 1; \
	fi
	$(PERL_COVER) $(PERL_COVER_FLAGS) "$(PERL_COVERAGE_DB)"

# We don't use direct dependencies here because we'd like to be able
# to invoke the report even after interrupted check-coverage.
check-coverage: check-coverage-run
	$(MAKE) $(AM_MAKEFLAGS) check-coverage-report

recheck-coverage: recheck-coverage-run
	$(MAKE) $(AM_MAKEFLAGS) check-coverage-report

clean-coverage:
	rm -rf "$(PERL_COVERAGE_DB)"
clean-local: clean-coverage

.PHONY: check-coverage recheck-coverage check-coverage-run \
	recheck-coverage-run check-coverage-report clean-coverage


## ---------------------------------------------------- ##
##  Tagging and/or uploading stable and beta releases.  ##
## ---------------------------------------------------- ##

GIT = git

EXTRA_DIST += lib/gnupload

base_version_rx = ^[1-9][0-9]*\.[0-9][0-9]*
stable_major_version_rx = $(base_version_rx)$$
stable_minor_version_rx = $(base_version_rx)\.[0-9][0-9]*$$
beta_version_rx = $(base_version_rx)(\.[0-9][0-9]*)?[bdfhjlnprtvxz]$$
match_version = echo "$(VERSION)" | $(EGREP) >/dev/null

## Check that we don't have uncommitted or unstaged changes.
## TODO: Maybe the git suite already offers a shortcut to verify if the
## TODO: working directory is "clean" or not?  If yes, use that instead
## TODO: of duplicating the logic here.
git_must_have_clean_workdir = \
  $(GIT) rev-parse --verify HEAD >/dev/null \
    && $(GIT) update-index -q --refresh \
    && $(GIT) diff-files --quiet \
    && $(GIT) diff-index --quiet --cached HEAD \
    || fatal "you have uncommitted or unstaged changes"

determine_release_type = \
  if $(match_version) '$(stable_major_version_rx)'; then \
    release_type='Major release'; \
    announcement_type='major release'; \
    dest=ftp; \
  elif $(match_version) '$(stable_minor_version_rx)'; then \
    release_type='Minor release'; \
    announcement_type='maintenance release'; \
    dest=ftp; \
  elif $(match_version) '$(beta_version_rx)'; then \
    release_type='Beta release'; \
    announcement_type='test release'; \
    dest=alpha; \
  else \
    fatal "invalid version '$(VERSION)' for a release"; \
  fi

# Help the debugging of $(determine_release_type) and related code.
print-release-type:
	@set -e -u \
	  && fatal () { echo "$@: $$*"; exit 0; } \
	  && $(determine_release_type) \
	  && echo "$$release_type $(VERSION);" \
	          "it will be announced as a $$announcement_type"

git-tag-release: maintainer-check
	@set -e; set -u; \
	fatal () { echo "$@: $$*; not tagging" >&2; exit 1; }; \
	case '$(AM_TAG_DRYRUN)' in \
	  ""|[nN]|[nN]o|NO) run="";; \
	  *) run="echo Running:";; \
	esac; \
	$(determine_release_type); \
	$(git_must_have_clean_workdir); \
## If all was successful, tag the release in the local repository.
	$$run $(GIT) tag -s "v$(VERSION)" -m "$$release_type $(VERSION)"

git-upload-release:
	@set -e; set -u; \
	fatal () { echo "$@: $$*; not releasing" >&2; exit 1; }; \
	$(determine_release_type); \
	dest=$$dest.gnu.org:automake; \
	$(git_must_have_clean_workdir); \
## Check that we are releasing from a valid tag.
	tag=`$(GIT) describe` \
	  && case $$tag in "v$(VERSION)") true;; *) false;; esac \
	  || fatal "you can only create a release from a tagged version"; \
## Build and upload the distribution tarball(s).
	$(MAKE) $(AM_MAKEFLAGS) dist || exit 1; \
	echo Will upload to $$dest: $(DIST_ARCHIVES); \
	$(srcdir)/lib/gnupload $(GNUPLOADFLAGS) --to $$dest $(DIST_ARCHIVES)

.PHONY: print-release-type git-upload-release git-tag-release


## ------------------------------------------------------------------ ##
##  Explore differences of autogenerated files in different commits.  ##
## ------------------------------------------------------------------ ##

## Visually comparing differences between the Makefile.in files in
## automake's own build system as generated in two different branches
## might help to catch bugs and blunders.  This has already happened a
## few times in the past, when we used to version-control Makefile.in.
autodiffs:
	@set -u; \
	 NEW_COMMIT=$${NEW_COMMIT-"HEAD"}; \
	 OLD_COMMIT=$${OLD_COMMIT-"HEAD~1"}; \
	 am_gitdir='$(abs_top_srcdir)/.git'; \
	 get_autofiles_from_rev () \
	 { \
	     rev=$$1 dir=$$2 \
	       && echo "$@: will get files from revision $$rev" \
	       && $(GIT) clone -q --depth 1 "$$am_gitdir" tmp \
	       && $(am__cd) tmp \
	       && $(GIT) checkout -q "$$rev" \
	       && echo "$@: bootstrapping $$rev" \
	       && $(SHELL) ./bootstrap.sh \
	       && echo "$@: copying files from $$rev" \
	       && makefile_ins=`find . -name Makefile.in` \
	       && (tar cf - configure aclocal.m4 $$makefile_ins) | \
	          (cd .. && $(am__cd) "$$dir" && tar xf -) \
	       && cd .. \
	       && rm -rf tmp; \
	 }; \
	 outdir=$@.dir \
## Before proceeding, ensure the specified revisions truly exist.
	   && $(GIT) --git-dir="$$am_gitdir" describe $$OLD_COMMIT >/dev/null \
	   && $(GIT) --git-dir="$$am_gitdir" describe $$NEW_COMMIT >/dev/null \
	   && rm -rf $$outdir \
	   && mkdir $$outdir \
	   && $(am__cd) $$outdir \
	   && mkdir new old \
	   && get_autofiles_from_rev $$OLD_COMMIT old \
	   && get_autofiles_from_rev $$NEW_COMMIT new \
	   && exit 0

## With lots of eye candy; we like our developers pampered and spoiled :-)
compare-autodiffs: autodiffs
	@set -u; \
	: $${COLORDIFF=colordiff} $${DIFF=diff}; \
	dir=autodiffs.dir; \
	if test ! -d "$$dir"; then \
	  echo "$@: $$dir: Not a directory" >&2; \
	  exit 1; \
	fi; \
	mydiff=false mypager=false; \
	if test -t 1; then \
	  if ($$COLORDIFF -r . .) </dev/null >/dev/null 2>&1; then \
	    mydiff=$$COLORDIFF; \
	    mypager="less -R"; \
	  else \
	    mypager=less; \
	  fi; \
	else \
	  mypager=cat; \
	fi; \
	if test "$$mydiff" = false; then \
	  if ($$DIFF -r -u . .); then \
	    mydiff=$$DIFF; \
	  else \
	    echo "$@: no good-enough diff program specified" >&2; \
	    exit 1; \
	  fi; \
	fi; \
	st=0; $$mydiff -r -u $$dir/old $$dir/new | $$mypager || st=$$?; \
	rm -rf $$dir; \
	exit $$st
.PHONY: autodiffs compare-autodiffs

## ---------------------------------------------- ##
##  Help writing the announcement for a release.  ##
## ---------------------------------------------- ##

PACKAGE_MAILINGLIST = automake@gnu.org

announcement: NEWS
	$(AM_V_GEN): \
	  && rm -f $@ $@-t \
	  && fatal () { echo "$@: $$*" >&2; exit 1; } \
	  && $(determine_release_type) \
	  && ftp_base="ftp://$$dest.gnu.org/gnu/$(PACKAGE)" \
	  && X () { printf '%s\n' "$$*" >> $@-t; } \
	  && X "We are pleased to announce the $(PACKAGE_NAME) $(VERSION)" \
	       "$$announcement_type." \
	  && X \
	  && X "**TODO** Brief description of the release here." \
	  && X \
	  && X "**TODO** This description can span multiple paragraphs." \
	  && X \
	  && X "See below for the detailed list of changes since the" \
	  && X "previous version, as summarized by the NEWS file." \
	  && X \
	  && X "Download here:" \
	  && X \
	  && X "  $$ftp_base/$(PACKAGE)-$(VERSION).tar.gz" \
	  && X "  $$ftp_base/$(PACKAGE)-$(VERSION).tar.xz" \
	  && X \
	  && X "Please report bugs and problems to" \
	       "<$(PACKAGE_BUGREPORT)>," \
	  && X "and send general comments and feedback to" \
	       "<$(PACKAGE_MAILINGLIST)>." \
	  && X \
	  && X "Thanks to everyone who has reported problems, contributed" \
	  && X "patches, and helped testing Automake!" \
	  && X \
	  && X "-*-*-*-" \
	  && X \
	  && sed -n -e '/^~~~/q' -e p $(srcdir)/NEWS >> $@-t \
	  && mv -f $@-t $@
.PHONY: announcement
CLEANFILES += announcement

## --------------------------------------------------------------------- ##
##  Synchronize third-party files that are committed in our repository.  ##
## --------------------------------------------------------------------- ##

# Program to use to fetch files.
WGET = wget

# Some repositories we sync files from.
SV_CVS    = 'http://savannah.gnu.org/cgi-bin/viewcvs/~checkout~/'
SV_GIT_CF = 'http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;hb=HEAD;f='
SV_GIT_AC = 'http://git.savannah.gnu.org/gitweb/?p=autoconf.git;a=blob_plain;hb=HEAD;f='
SV_GIT_GL = 'http://git.savannah.gnu.org/gitweb/?p=gnulib.git;a=blob_plain;hb=HEAD;f='

# Files that we fetch and which we compare against.
# Note that the 'lib/COPYING' file must still be synced by hand.
FETCHFILES = \
  $(SV_GIT_CF)config.guess \
  $(SV_GIT_CF)config.sub \
  $(SV_CVS)texinfo/texinfo/doc/texinfo.tex \
  $(SV_CVS)texinfo/texinfo/util/gendocs.sh \
  $(SV_CVS)texinfo/texinfo/util/gendocs_template \
  $(SV_GIT_GL)build-aux/gitlog-to-changelog \
  $(SV_GIT_GL)build-aux/gnupload \
  $(SV_GIT_GL)build-aux/update-copyright \
  $(SV_GIT_GL)doc/INSTALL

# Fetch the latest versions of few scripts and files we care about.
fetch:
	$(AM_V_at)rm -rf Fetchdir
	$(AM_V_at)mkdir Fetchdir
	$(AM_V_GEN)set -e; \
	if $(AM_V_P); then wget_opts=; else wget_opts=-nv; fi; \
	for url in $(FETCHFILES); do \
	   file=`printf '%s\n' "$$url" | sed 's|^.*/||; s|^.*=||'`; \
## A retrieval failure usually means a serious problem.  Just bail out.
	   $(WGET) $$wget_opts "$$url" -O Fetchdir/$$file || exit 1; \
	   if cmp Fetchdir/$$file $(srcdir)/lib/$$file >/dev/null; then \
	     : Nothing to do; \
	   else \
	     echo "$@: updating file $$file"; \
## Ditto for a copying failure.
	     cp Fetchdir/$$file $(srcdir)/lib/$$file || exit 1; \
	   fi; \
	done
	$(AM_V_at)rm -rf Fetchdir
.PHONY: fetch

## ---------------------------------------------------------------------- ##
##  Generate and upload manuals in several formats, for the GNU website.  ##
## ---------------------------------------------------------------------- ##

web_manual_dir = doc/web-manual

RSYNC = rsync
CVS = cvs
CVSU = cvsu
CVS_USER = $${USER}
WEBCVS_ROOT = cvs.savannah.gnu.org:/web

web-manual:
	$(AM_V_at)rm -rf $(web_manual_dir)
	$(AM_V_GEN)tmp=$@.dir \
	  && rm -rf $$tmp \
	  && mkdir $$tmp \
	  && $(am__cd) $$tmp \
	  && GENDOCS_TEMPLATE_DIR='$(abs_srcdir)/lib' \
	  && export GENDOCS_TEMPLATE_DIR \
## Needed to pacify extra checks from gendocs.sh.
	  && $(LN_S) '$(abs_srcdir)/doc/$(PACKAGE).texi' . \
## Try to respect silent rules.
	  && if $(AM_V_P); then :; else exec >/dev/null 2>&1; fi \
## Finally generate the manual in several formats.
	  && $(SHELL) '$(abs_srcdir)/lib/gendocs.sh' \
	     -I '$(abs_srcdir)/doc' --email $(PACKAGE_BUGREPORT) \
	     $(PACKAGE) '$(PACKAGE_NAME)'
	$(AM_V_at)tmp=$@.dir \
	 && mkdir $(web_manual_dir) \
	 && mv -f $$tmp/manual/* $(web_manual_dir) \
	 && rm -rf $$tmp \
	 && { ! $(AM_V_P) || ls -l $(web_manual_dir); }
.PHONY: web-manual

web-manual-update:
	$(AM_V_at)fatal () { echo "$@: $$*" >&2; exit 1; }; \
	$(determine_release_type); \
	case $$release_type in \
	  [Mm]ajor\ release|[Mm]inor\ release);; \
	  *) echo "Cannot upload manuals from a \"$$release_type\"" >&2; \
	     exit 1;; \
	esac
	$(AM_V_at)test -f $(web_manual_dir)/$(PACKAGE).html || { \
	  echo 'You have to run "$(MAKE) web-manuals" before' \
	       'invoking "$(MAKE) $@"' >&2; \
	  exit 1; \
	}
	$(AM_V_GEN): \
	  && CVS_RSH=ssh && export CVS_RSH=ssh \
	  && tmp=$@.dir \
	  && rm -rf $$tmp \
	  && mkdir $$tmp \
	  && $(am__cd) $$tmp \
	  && $(CVS) -z3 -d :ext:$(CVS_USER)@$(WEBCVS_ROOT)/$(PACKAGE) \
	            co $(PACKAGE) \
	  && cd .. \
## According to the rsync manpage, "a trailing slash on the source [...]
## avoids creating an additional directory level at the destination".
## So the trailing '/' after '$(web_manual_dir)' below is intended.
	  && $(RSYNC) -avP $(web_manual_dir)/ $$tmp/$(PACKAGE)/manual \
	  && ( \
	    cd $$tmp/$(PACKAGE)/manual \
	      && new_files=`$(CVSU) --types='?'` \
	      && new_files=`echo "$$new_files" | sed s/^..//` \
	      && { test -z "$$new_files" || $(CVS) add -ko $$new_files; } \
	      && $(CVS) ci -m $(VERSION) \
	    ) \
	  && rm -rf $$tmp
.PHONY: web-manual-update

clean-web-manual:
	$(AM_V_at)rm -rf $(web_manual_dir)
.PHONY: clean-web-manual
clean-local: clean-web-manual

EXTRA_DIST += lib/gendocs.sh lib/gendocs_template

## ------------------------------------------------ ##
##  Update copyright years of all committed files.  ##
## ------------------------------------------------ ##

EXTRA_DIST += lib/update-copyright

update_copyright_env = \
  UPDATE_COPYRIGHT_FORCE=1 \
  UPDATE_COPYRIGHT_USE_INTERVALS=2

# In addition to the several README files, these as well are
# not expected to have a copyright notice.
files_without_copyright = \
  .autom4te.cfg \
  .git-log-fix \
  .gitattributes \
  .gitignore \
  INSTALL \
  COPYING \
  AUTHORS \
  THANKS \
  lib/INSTALL \
  lib/COPYING

# This script is in the public domain.
files_without_copyright += lib/mkinstalldirs

# This script has an MIT-style license
files_without_copyright += lib/install-sh

.PHONY: update-copyright
update-copyright:
	$(AM_V_GEN)set -e; \
	current_year=`date +%Y` && test -n "$$current_year" \
	  || { echo "$@: cannot get current year" >&2; exit 1; }; \
	sed -i "/^RELEASE_YEAR=/s/=.*$$/=$$current_year/" \
	  bootstrap.sh configure.ac; \
	excluded_re=`( \
	  for url in $(FETCHFILES); do echo "$$url"; done \
	    | sed -e 's!^.*/!!' -e 's!^.*=!!' -e 's!^!lib/!' \
	  && for f in $(files_without_copyright); do echo $$f; done \
	) | sed -e '$$!s,$$,|,' | tr -d '\012\015'`; \
	$(GIT) ls-files \
	  | grep -Ev '(^|/)README$$' \
	  | grep -Ev "^($$excluded_re)$$" \
	  | $(update_copyright_env) xargs $(srcdir)/lib/$@