usb: ch9: Update from Linux Kernel

Update ch9.h from Linux-6.3-rc2. Linux has split up the file into a
kernel and a uapi portion. We do the same for barebox for easier
updating in the future.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

5 files changed, 1296 insertions, 1022 deletions

diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h
index 1494df261d..054f1717e1 100644
--- a/drivers/usb/dwc3/debug.h
+++ b/drivers/usb/dwc3/debug.h
@@ -291,19 +291,19 @@ static inline void dwc3_decode_set_clear_feature(__u8 t, __u8 b, __u16 v,
 			v == USB_DEVICE_TEST_MODE ?
 			({ char *s;
 				switch (i) {
-				case TEST_J:
+				case USB_TEST_J:
 					s = ": TEST_J";
 					break;
-				case TEST_K:
+				case USB_TEST_K:
 					s = ": TEST_K";
 					break;
-				case TEST_SE0_NAK:
+				case USB_TEST_SE0_NAK:
 					s = ": TEST_SE0_NAK";
 					break;
-				case TEST_PACKET:
+				case USB_TEST_PACKET:
 					s = ": TEST_PACKET";
 					break;
-				case TEST_FORCE_EN:
+				case USB_TEST_FORCE_ENABLE:
 					s = ": TEST_FORCE_EN";
 					break;
 				default:
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index f4864d0388..a8503a2bad 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -435,11 +435,11 @@ static int dwc3_ep0_handle_test(struct dwc3 *dwc, enum usb_device_state state,
 		return -EINVAL;
 
 	switch (wIndex >> 8) {
-	case TEST_J:
-	case TEST_K:
-	case TEST_SE0_NAK:
-	case TEST_PACKET:
-	case TEST_FORCE_EN:
+	case USB_TEST_J:
+	case USB_TEST_K:
+	case USB_TEST_SE0_NAK:
+	case USB_TEST_PACKET:
+	case USB_TEST_FORCE_ENABLE:
 		dwc->test_mode_nr = wIndex >> 8;
 		dwc->test_mode = true;
 		break;
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 1aec73c7d9..0203b7bfc1 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -44,11 +44,11 @@ int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode)
 	reg &= ~DWC3_DCTL_TSTCTRL_MASK;
 
 	switch (mode) {
-	case TEST_J:
-	case TEST_K:
-	case TEST_SE0_NAK:
-	case TEST_PACKET:
-	case TEST_FORCE_EN:
+	case USB_TEST_J:
+	case USB_TEST_K:
+	case USB_TEST_SE0_NAK:
+	case USB_TEST_PACKET:
+	case USB_TEST_FORCE_ENABLE:
 		reg |= mode << 1;
 		break;
 	default:
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index 4c1e765326..019b6c87e4 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -1,5 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * This file holds USB constants and structures that are needed for
  * USB device APIs.  These are used by the USB device model, which is
@@ -7,13 +6,13 @@
  * Wireless USB 1.0 (spread around).  Linux has several APIs in C that
  * need these:
  *
- * - the master/host side Linux-USB kernel driver API;
+ * - the host side Linux-USB kernel driver API;
  * - the "usbfs" user space API; and
- * - the Linux "gadget" slave/device/peripheral side driver API.
+ * - the Linux "gadget" device/peripheral side driver API.
  *
  * USB 2.0 adds an additional "On The Go" (OTG) mode, which lets systems
- * act either as a USB master/host or as a USB slave/device.  That means
- * the master and slave side APIs benefit from working well together.
+ * act either as a USB host or as a USB device.  That means the host and
+ * device side APIs benefit from working well together.
  *
  * There's also "Wireless USB", using low power short range radios for
  * peripheral interconnection but otherwise building on the USB framework.
@@ -31,1003 +30,21 @@
  *     someone that the two other points are non-issues for that
  *     particular descriptor type.
  */
+#ifndef __LINUX_USB_CH9_H
+#define __LINUX_USB_CH9_H
 
-#ifndef _UAPI__LINUX_USB_CH9_H
-#define _UAPI__LINUX_USB_CH9_H
-
-#include <linux/types.h>	/* __u8 etc */
-#include <asm/byteorder.h>	/* le16_to_cpu */
-
-/*-------------------------------------------------------------------------*/
-
-/* CONTROL REQUEST SUPPORT */
-
-/*
- * USB directions
- *
- * This bit flag is used in endpoint descriptors' bEndpointAddress field.
- * It's also one of three fields in control requests bRequestType.
- */
-#define USB_DIR_OUT			0		/* to device */
-#define USB_DIR_IN			0x80		/* to host */
-
-/*
- * USB types, the second of three bRequestType fields
- */
-#define USB_TYPE_MASK			(0x03 << 5)
-#define USB_TYPE_STANDARD		(0x00 << 5)
-#define USB_TYPE_CLASS			(0x01 << 5)
-#define USB_TYPE_VENDOR			(0x02 << 5)
-#define USB_TYPE_RESERVED		(0x03 << 5)
-
-/*
- * USB recipients, the third of three bRequestType fields
- */
-#define USB_RECIP_MASK			0x1f
-#define USB_RECIP_DEVICE		0x00
-#define USB_RECIP_INTERFACE		0x01
-#define USB_RECIP_ENDPOINT		0x02
-#define USB_RECIP_OTHER			0x03
-/* From Wireless USB 1.0 */
-#define USB_RECIP_PORT			0x04
-#define USB_RECIP_RPIPE		0x05
-
-/*
- * Standard requests, for the bRequest field of a SETUP packet.
- *
- * These are qualified by the bRequestType field, so that for example
- * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved
- * by a GET_STATUS request.
- */
-#define USB_REQ_GET_STATUS		0x00
-#define USB_REQ_CLEAR_FEATURE		0x01
-#define USB_REQ_SET_FEATURE		0x03
-#define USB_REQ_SET_ADDRESS		0x05
-#define USB_REQ_GET_DESCRIPTOR		0x06
-#define USB_REQ_SET_DESCRIPTOR		0x07
-#define USB_REQ_GET_CONFIGURATION	0x08
-#define USB_REQ_SET_CONFIGURATION	0x09
-#define USB_REQ_GET_INTERFACE		0x0A
-#define USB_REQ_SET_INTERFACE		0x0B
-#define USB_REQ_SYNCH_FRAME		0x0C
-#define USB_REQ_SET_SEL			0x30
-#define USB_REQ_SET_ISOCH_DELAY		0x31
-
-#define USB_REQ_SET_ENCRYPTION		0x0D	/* Wireless USB */
-#define USB_REQ_GET_ENCRYPTION		0x0E
-#define USB_REQ_RPIPE_ABORT		0x0E
-#define USB_REQ_SET_HANDSHAKE		0x0F
-#define USB_REQ_RPIPE_RESET		0x0F
-#define USB_REQ_GET_HANDSHAKE		0x10
-#define USB_REQ_SET_CONNECTION		0x11
-#define USB_REQ_SET_SECURITY_DATA	0x12
-#define USB_REQ_GET_SECURITY_DATA	0x13
-#define USB_REQ_SET_WUSB_DATA		0x14
-#define USB_REQ_LOOPBACK_DATA_WRITE	0x15
-#define USB_REQ_LOOPBACK_DATA_READ	0x16
-#define USB_REQ_SET_INTERFACE_DS	0x17
-
-/* The Link Power Management (LPM) ECN defines USB_REQ_TEST_AND_SET command,
- * used by hubs to put ports into a new L1 suspend state, except that it
- * forgot to define its number ...
- */
-
-/*
- * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and
- * are read as a bit array returned by USB_REQ_GET_STATUS.  (So there
- * are at most sixteen features of each type.)  Hubs may also support a
- * new USB_REQ_TEST_AND_SET_FEATURE to put ports into L1 suspend.
- */
-#define USB_DEVICE_SELF_POWERED		0	/* (read only) */
-#define USB_DEVICE_REMOTE_WAKEUP	1	/* dev may initiate wakeup */
-#define USB_DEVICE_TEST_MODE		2	/* (wired high speed only) */
-#define USB_DEVICE_BATTERY		2	/* (wireless) */
-#define USB_DEVICE_B_HNP_ENABLE		3	/* (otg) dev may initiate HNP */
-#define USB_DEVICE_WUSB_DEVICE		3	/* (wireless)*/
-#define USB_DEVICE_A_HNP_SUPPORT	4	/* (otg) RH port supports HNP */
-#define USB_DEVICE_A_ALT_HNP_SUPPORT	5	/* (otg) other RH port does */
-#define USB_DEVICE_DEBUG_MODE		6	/* (special devices only) */
-
-/*
- * Test Mode Selectors
- * See USB 2.0 spec Table 9-7
- */
-#define	TEST_J		1
-#define	TEST_K		2
-#define	TEST_SE0_NAK	3
-#define	TEST_PACKET	4
-#define	TEST_FORCE_EN	5
-
-/*
- * New Feature Selectors as added by USB 3.0
- * See USB 3.0 spec Table 9-7
- */
-#define USB_DEVICE_U1_ENABLE	48	/* dev may initiate U1 transition */
-#define USB_DEVICE_U2_ENABLE	49	/* dev may initiate U2 transition */
-#define USB_DEVICE_LTM_ENABLE	50	/* dev may send LTM */
-#define USB_INTRF_FUNC_SUSPEND	0	/* function suspend */
-
-#define USB_INTR_FUNC_SUSPEND_OPT_MASK	0xFF00
-/*
- * Suspend Options, Table 9-8 USB 3.0 spec
- */
-#define USB_INTRF_FUNC_SUSPEND_LP	(1 << (8 + 0))
-#define USB_INTRF_FUNC_SUSPEND_RW	(1 << (8 + 1))
-
-/*
- * Interface status, Figure 9-5 USB 3.0 spec
- */
-#define USB_INTRF_STAT_FUNC_RW_CAP     1
-#define USB_INTRF_STAT_FUNC_RW         2
-
-#define USB_ENDPOINT_HALT		0	/* IN/OUT will STALL */
-
-/* Bit array elements as returned by the USB_REQ_GET_STATUS request. */
-#define USB_DEV_STAT_U1_ENABLED		2	/* transition into U1 state */
-#define USB_DEV_STAT_U2_ENABLED		3	/* transition into U2 state */
-#define USB_DEV_STAT_LTM_ENABLED	4	/* Latency tolerance messages */
-
-/**
- * struct usb_ctrlrequest - SETUP data for a USB device control request
- * @bRequestType: matches the USB bmRequestType field
- * @bRequest: matches the USB bRequest field
- * @wValue: matches the USB wValue field (le16 byte order)
- * @wIndex: matches the USB wIndex field (le16 byte order)
- * @wLength: matches the USB wLength field (le16 byte order)
- *
- * This structure is used to send control requests to a USB device.  It matches
- * the different fields of the USB 2.0 Spec section 9.3, table 9-2.  See the
- * USB spec for a fuller description of the different fields, and what they are
- * used for.
- *
- * Note that the driver for any interface can issue control requests.
- * For most devices, interfaces don't coordinate with each other, so
- * such requests may be made at any time.
- */
-struct usb_ctrlrequest {
-	__u8 bRequestType;
-	__u8 bRequest;
-	__le16 wValue;
-	__le16 wIndex;
-	__le16 wLength;
-} __attribute__ ((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or
- * (rarely) accepted by SET_DESCRIPTOR.
- *
- * Note that all multi-byte values here are encoded in little endian
- * byte order "on the wire".  Within the kernel and when exposed
- * through the Linux-USB APIs, they are not converted to cpu byte
- * order; it is the responsibility of the client code to do this.
- * The single exception is when device and configuration descriptors (but
- * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD);
- * in this case the fields are converted to host endianness by the kernel.
- */
-
-/*
- * Descriptor types ... USB 2.0 spec table 9.5
- */
-#define USB_DT_DEVICE			0x01
-#define USB_DT_CONFIG			0x02
-#define USB_DT_STRING			0x03
-#define USB_DT_INTERFACE		0x04
-#define USB_DT_ENDPOINT			0x05
-#define USB_DT_DEVICE_QUALIFIER		0x06
-#define USB_DT_OTHER_SPEED_CONFIG	0x07
-#define USB_DT_INTERFACE_POWER		0x08
-/* these are from a minor usb 2.0 revision (ECN) */
-#define USB_DT_OTG			0x09
-#define USB_DT_DEBUG			0x0a
-#define USB_DT_INTERFACE_ASSOCIATION	0x0b
-/* these are from the Wireless USB spec */
-#define USB_DT_SECURITY			0x0c
-#define USB_DT_KEY			0x0d
-#define USB_DT_ENCRYPTION_TYPE		0x0e
-#define USB_DT_BOS			0x0f
-#define USB_DT_DEVICE_CAPABILITY	0x10
-#define USB_DT_WIRELESS_ENDPOINT_COMP	0x11
-#define USB_DT_WIRE_ADAPTER		0x21
-#define USB_DT_RPIPE			0x22
-#define USB_DT_CS_RADIO_CONTROL		0x23
-/* From the T10 UAS specification */
-#define USB_DT_PIPE_USAGE		0x24
-/* From the USB 3.0 spec */
-#define	USB_DT_SS_ENDPOINT_COMP		0x30
-/* From the USB 3.1 spec */
-#define	USB_DT_SSP_ISOC_ENDPOINT_COMP	0x31
-
-/* Conventional codes for class-specific descriptors.  The convention is
- * defined in the USB "Common Class" Spec (3.11).  Individual class specs
- * are authoritative for their usage, not the "common class" writeup.
- */
-#define USB_DT_CS_DEVICE		(USB_TYPE_CLASS | USB_DT_DEVICE)
-#define USB_DT_CS_CONFIG		(USB_TYPE_CLASS | USB_DT_CONFIG)
-#define USB_DT_CS_STRING		(USB_TYPE_CLASS | USB_DT_STRING)
-#define USB_DT_CS_INTERFACE		(USB_TYPE_CLASS | USB_DT_INTERFACE)
-#define USB_DT_CS_ENDPOINT		(USB_TYPE_CLASS | USB_DT_ENDPOINT)
-
-/* All standard descriptors have these 2 fields at the beginning */
-struct usb_descriptor_header {
-	__u8  bLength;
-	__u8  bDescriptorType;
-} __attribute__ ((packed));
-
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_DEVICE: Device descriptor */
-struct usb_device_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__le16 bcdUSB;
-	__u8  bDeviceClass;
-	__u8  bDeviceSubClass;
-	__u8  bDeviceProtocol;
-	__u8  bMaxPacketSize0;
-	__le16 idVendor;
-	__le16 idProduct;
-	__le16 bcdDevice;
-	__u8  iManufacturer;
-	__u8  iProduct;
-	__u8  iSerialNumber;
-	__u8  bNumConfigurations;
-} __attribute__ ((packed));
-
-#define USB_DT_DEVICE_SIZE		18
-
-
-/*
- * Device and/or Interface Class codes
- * as found in bDeviceClass or bInterfaceClass
- * and defined by www.usb.org documents
- */
-#define USB_CLASS_PER_INTERFACE		0	/* for DeviceClass */
-#define USB_CLASS_AUDIO			1
-#define USB_CLASS_COMM			2
-#define USB_CLASS_HID			3
-#define USB_CLASS_PHYSICAL		5
-#define USB_CLASS_STILL_IMAGE		6
-#define USB_CLASS_PRINTER		7
-#define USB_CLASS_MASS_STORAGE		8
-#define USB_CLASS_HUB			9
-#define USB_CLASS_CDC_DATA		0x0a
-#define USB_CLASS_CSCID			0x0b	/* chip+ smart card */
-#define USB_CLASS_CONTENT_SEC		0x0d	/* content security */
-#define USB_CLASS_VIDEO			0x0e
-#define USB_CLASS_WIRELESS_CONTROLLER	0xe0
-#define USB_CLASS_MISC			0xef
-#define USB_CLASS_APP_SPEC		0xfe
-#define USB_CLASS_VENDOR_SPEC		0xff
-
-#define USB_SUBCLASS_VENDOR_SPEC	0xff
+#include <uapi/linux/usb/ch9.h>
 
-/*-------------------------------------------------------------------------*/
+/* USB 3.2 SuperSpeed Plus phy signaling rate generation and lane count */
 
-/* USB_DT_CONFIG: Configuration descriptor information.
- *
- * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the
- * descriptor type is different.  Highspeed-capable devices can look
- * different depending on what speed they're currently running.  Only
- * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG
- * descriptors.
- */
-struct usb_config_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__le16 wTotalLength;
-	__u8  bNumInterfaces;
-	__u8  bConfigurationValue;
-	__u8  iConfiguration;
-	__u8  bmAttributes;
-	__u8  bMaxPower;
-} __attribute__ ((packed));
-
-#define USB_DT_CONFIG_SIZE		9
-
-/* from config descriptor bmAttributes */
-#define USB_CONFIG_ATT_ONE		(1 << 7)	/* must be set */
-#define USB_CONFIG_ATT_SELFPOWER	(1 << 6)	/* self powered */
-#define USB_CONFIG_ATT_WAKEUP		(1 << 5)	/* can wakeup */
-#define USB_CONFIG_ATT_BATTERY		(1 << 4)	/* battery powered */
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_STRING: String descriptor */
-struct usb_string_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__le16 wData[1];		/* UTF-16LE encoded */
-} __attribute__ ((packed));
-
-/* note that "string" zero is special, it holds language codes that
- * the device supports, not Unicode characters.
- */
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_INTERFACE: Interface descriptor */
-struct usb_interface_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__u8  bInterfaceNumber;
-	__u8  bAlternateSetting;
-	__u8  bNumEndpoints;
-	__u8  bInterfaceClass;
-	__u8  bInterfaceSubClass;
-	__u8  bInterfaceProtocol;
-	__u8  iInterface;
-} __attribute__ ((packed));
-
-#define USB_DT_INTERFACE_SIZE		9
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_ENDPOINT: Endpoint descriptor */
-struct usb_endpoint_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__u8  bEndpointAddress;
-	__u8  bmAttributes;
-	__le16 wMaxPacketSize;
-	__u8  bInterval;
-
-	/* NOTE:  these two are _only_ in audio endpoints. */
-	/* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */
-	__u8  bRefresh;
-	__u8  bSynchAddress;
-} __attribute__ ((packed));
-
-#define USB_DT_ENDPOINT_SIZE		7
-#define USB_DT_ENDPOINT_AUDIO_SIZE	9	/* Audio extension */
-
-
-/*
- * Endpoints
- */
-#define USB_ENDPOINT_NUMBER_MASK	0x0f	/* in bEndpointAddress */
-#define USB_ENDPOINT_DIR_MASK		0x80
-
-#define USB_ENDPOINT_XFERTYPE_MASK	0x03	/* in bmAttributes */
-#define USB_ENDPOINT_XFER_CONTROL	0
-#define USB_ENDPOINT_XFER_ISOC		1
-#define USB_ENDPOINT_XFER_BULK		2
-#define USB_ENDPOINT_XFER_INT		3
-#define USB_ENDPOINT_MAX_ADJUSTABLE	0x80
-
-#define USB_ENDPOINT_MAXP_MASK          0x07ff
-#define USB_EP_MAXP_MULT_SHIFT          11
-#define USB_EP_MAXP_MULT_MASK           (3 << USB_EP_MAXP_MULT_SHIFT)
-#define USB_EP_MAXP_MULT(m)             \
-	(((m) & USB_EP_MAXP_MULT_MASK) >> USB_EP_MAXP_MULT_SHIFT)
-
-/* The USB 3.0 spec redefines bits 5:4 of bmAttributes as interrupt ep type. */
-#define USB_ENDPOINT_INTRTYPE		0x30
-#define USB_ENDPOINT_INTR_PERIODIC	(0 << 4)
-#define USB_ENDPOINT_INTR_NOTIFICATION	(1 << 4)
-
-#define USB_ENDPOINT_SYNCTYPE		0x0c
-#define USB_ENDPOINT_SYNC_NONE		(0 << 2)
-#define USB_ENDPOINT_SYNC_ASYNC		(1 << 2)
-#define USB_ENDPOINT_SYNC_ADAPTIVE	(2 << 2)
-#define USB_ENDPOINT_SYNC_SYNC		(3 << 2)
-
-#define USB_ENDPOINT_USAGE_MASK		0x30
-#define USB_ENDPOINT_USAGE_DATA		0x00
-#define USB_ENDPOINT_USAGE_FEEDBACK	0x10
-#define USB_ENDPOINT_USAGE_IMPLICIT_FB	0x20	/* Implicit feedback Data endpoint */
-
-/*-------------------------------------------------------------------------*/
-
-/**
- * usb_endpoint_num - get the endpoint's number
- * @epd: endpoint to be checked
- *
- * Returns @epd's number: 0 to 15.
- */
-static inline int usb_endpoint_num(const struct usb_endpoint_descriptor *epd)
-{
-	return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
-}
-
-/**
- * usb_endpoint_type - get the endpoint's transfer type
- * @epd: endpoint to be checked
- *
- * Returns one of USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT} according
- * to @epd's transfer type.
- */
-static inline int usb_endpoint_type(const struct usb_endpoint_descriptor *epd)
-{
-	return epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
-}
-
-/**
- * usb_endpoint_dir_in - check if the endpoint has IN direction
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type IN, otherwise it returns false.
- */
-static inline int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd)
-{
-	return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN);
-}
-
-/**
- * usb_endpoint_dir_out - check if the endpoint has OUT direction
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type OUT, otherwise it returns false.
- */
-static inline int usb_endpoint_dir_out(
-				const struct usb_endpoint_descriptor *epd)
-{
-	return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT);
-}
-
-/**
- * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type bulk, otherwise it returns false.
- */
-static inline int usb_endpoint_xfer_bulk(
-				const struct usb_endpoint_descriptor *epd)
-{
-	return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
-		USB_ENDPOINT_XFER_BULK);
-}
-
-/**
- * usb_endpoint_xfer_control - check if the endpoint has control transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type control, otherwise it returns false.
- */
-static inline int usb_endpoint_xfer_control(
-				const struct usb_endpoint_descriptor *epd)
-{
-	return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
-		USB_ENDPOINT_XFER_CONTROL);
-}
-
-/**
- * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type interrupt, otherwise it returns
- * false.
- */
-static inline int usb_endpoint_xfer_int(
-				const struct usb_endpoint_descriptor *epd)
-{
-	return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
-		USB_ENDPOINT_XFER_INT);
-}
-
-/**
- * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type isochronous, otherwise it returns
- * false.
- */
-static inline int usb_endpoint_xfer_isoc(
-				const struct usb_endpoint_descriptor *epd)
-{
-	return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
-		USB_ENDPOINT_XFER_ISOC);
-}
-
-/**
- * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has bulk transfer type and IN direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_bulk_in(
-				const struct usb_endpoint_descriptor *epd)
-{
-	return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd);
-}
-
-/**
- * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has bulk transfer type and OUT direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_bulk_out(
-				const struct usb_endpoint_descriptor *epd)
-{
-	return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd);
-}
-
-/**
- * usb_endpoint_is_int_in - check if the endpoint is interrupt IN
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has interrupt transfer type and IN direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_int_in(
-				const struct usb_endpoint_descriptor *epd)
-{
-	return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd);
-}
-
-/**
- * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has interrupt transfer type and OUT direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_int_out(
-				const struct usb_endpoint_descriptor *epd)
-{
-	return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd);
-}
-
-/**
- * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has isochronous transfer type and IN direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_isoc_in(
-				const struct usb_endpoint_descriptor *epd)
-{
-	return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd);
-}
-
-/**
- * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has isochronous transfer type and OUT direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_isoc_out(
-				const struct usb_endpoint_descriptor *epd)
-{
-	return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd);
-}
-
-/**
- * usb_endpoint_maxp - get endpoint's max packet size
- * @epd: endpoint to be checked
- *
- * Returns @epd's max packet
- */
-static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd)
-{
-	return __le16_to_cpu(epd->wMaxPacketSize);
-}
-
-/**
- * usb_endpoint_maxp_mult - get endpoint's transactional opportunities
- * @epd: endpoint to be checked
- *
- * Return @epd's wMaxPacketSize[12:11] + 1
- */
-static inline int
-usb_endpoint_maxp_mult(const struct usb_endpoint_descriptor *epd)
-{
-	int maxp = __le16_to_cpu(epd->wMaxPacketSize);
-
-	return USB_EP_MAXP_MULT(maxp) + 1;
-}
-
-static inline int usb_endpoint_interrupt_type(
-		const struct usb_endpoint_descriptor *epd)
-{
-	return epd->bmAttributes & USB_ENDPOINT_INTRTYPE;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */
-struct usb_ss_ep_comp_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__u8  bMaxBurst;
-	__u8  bmAttributes;
-	__le16 wBytesPerInterval;
-} __attribute__ ((packed));
-
-#define USB_DT_SS_EP_COMP_SIZE		6
-
-/* Bits 4:0 of bmAttributes if this is a bulk endpoint */
-static inline int
-usb_ss_max_streams(const struct usb_ss_ep_comp_descriptor *comp)
-{
-	int		max_streams;
-
-	if (!comp)
-		return 0;
-
-	max_streams = comp->bmAttributes & 0x1f;
-
-	if (!max_streams)
-		return 0;
-
-	max_streams = 1 << max_streams;
-
-	return max_streams;
-}
-
-/* Bits 1:0 of bmAttributes if this is an isoc endpoint */
-#define USB_SS_MULT(p)			(1 + ((p) & 0x3))
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */
-struct usb_qualifier_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__le16 bcdUSB;
-	__u8  bDeviceClass;
-	__u8  bDeviceSubClass;
-	__u8  bDeviceProtocol;
-	__u8  bMaxPacketSize0;
-	__u8  bNumConfigurations;
-	__u8  bRESERVED;
-} __attribute__ ((packed));
-
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_OTG (from OTG 1.0a supplement) */
-struct usb_otg_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__u8  bmAttributes;	/* support for HNP, SRP, etc */
-} __attribute__ ((packed));
-
-/* from usb_otg_descriptor.bmAttributes */
-#define USB_OTG_SRP		(1 << 0)
-#define USB_OTG_HNP		(1 << 1)	/* swap host/device roles */
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_DEBUG:  for special highspeed devices, replacing serial console */
-struct usb_debug_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	/* bulk endpoints with 8 byte maxpacket */
-	__u8  bDebugInEndpoint;
-	__u8  bDebugOutEndpoint;
-} __attribute__((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */
-struct usb_interface_assoc_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__u8  bFirstInterface;
-	__u8  bInterfaceCount;
-	__u8  bFunctionClass;
-	__u8  bFunctionSubClass;
-	__u8  bFunctionProtocol;
-	__u8  iFunction;
-} __attribute__ ((packed));
-
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_SECURITY:  group of wireless security descriptors, including
- * encryption types available for setting up a CC/association.
- */
-struct usb_security_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__le16 wTotalLength;
-	__u8  bNumEncryptionTypes;
-} __attribute__((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_KEY:  used with {GET,SET}_SECURITY_DATA; only public keys
- * may be retrieved.
- */
-struct usb_key_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__u8  tTKID[3];
-	__u8  bReserved;
-	__u8  bKeyData[0];
-} __attribute__((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_ENCRYPTION_TYPE:  bundled in DT_SECURITY groups */
-struct usb_encryption_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__u8  bEncryptionType;
-#define	USB_ENC_TYPE_UNSECURE		0
-#define	USB_ENC_TYPE_WIRED		1	/* non-wireless mode */
-#define	USB_ENC_TYPE_CCM_1		2	/* aes128/cbc session */
-#define	USB_ENC_TYPE_RSA_1		3	/* rsa3072/sha1 auth */
-	__u8  bEncryptionValue;		/* use in SET_ENCRYPTION */
-	__u8  bAuthKeyIndex;
-} __attribute__((packed));
-
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_BOS:  group of device-level capabilities */
-struct usb_bos_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__le16 wTotalLength;
-	__u8  bNumDeviceCaps;
-} __attribute__((packed));
-
-#define USB_DT_BOS_SIZE		5
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_DEVICE_CAPABILITY:  grouped with BOS */
-struct usb_dev_cap_header {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDevCapabilityType;
-} __attribute__((packed));
-
-#define	USB_CAP_TYPE_WIRELESS_USB	1
-
-struct usb_wireless_cap_descriptor {	/* Ultra Wide Band */
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDevCapabilityType;
-
-	__u8  bmAttributes;
-#define	USB_WIRELESS_P2P_DRD		(1 << 1)
-#define	USB_WIRELESS_BEACON_MASK	(3 << 2)
-#define	USB_WIRELESS_BEACON_SELF	(1 << 2)
-#define	USB_WIRELESS_BEACON_DIRECTED	(2 << 2)
-#define	USB_WIRELESS_BEACON_NONE	(3 << 2)
-	__le16 wPHYRates;	/* bit rates, Mbps */
-#define	USB_WIRELESS_PHY_53		(1 << 0)	/* always set */
-#define	USB_WIRELESS_PHY_80		(1 << 1)
-#define	USB_WIRELESS_PHY_107		(1 << 2)	/* always set */
-#define	USB_WIRELESS_PHY_160		(1 << 3)
-#define	USB_WIRELESS_PHY_200		(1 << 4)	/* always set */
-#define	USB_WIRELESS_PHY_320		(1 << 5)
-#define	USB_WIRELESS_PHY_400		(1 << 6)
-#define	USB_WIRELESS_PHY_480		(1 << 7)
-	__u8  bmTFITXPowerInfo;	/* TFI power levels */
-	__u8  bmFFITXPowerInfo;	/* FFI power levels */
-	__le16 bmBandGroup;
-	__u8  bReserved;
-} __attribute__((packed));
-
-/* USB 2.0 Extension descriptor */
-#define	USB_CAP_TYPE_EXT		2
-
-struct usb_ext_cap_descriptor {		/* Link Power Management */
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDevCapabilityType;
-	__le32 bmAttributes;
-#define USB_LPM_SUPPORT			(1 << 1)	/* supports LPM */
-#define USB_BESL_SUPPORT		(1 << 2)	/* supports BESL */
-#define USB_BESL_BASELINE_VALID		(1 << 3)	/* Baseline BESL valid*/
-#define USB_BESL_DEEP_VALID		(1 << 4)	/* Deep BESL valid */
-#define USB_GET_BESL_BASELINE(p)	(((p) & (0xf << 8)) >> 8)
-#define USB_GET_BESL_DEEP(p)		(((p) & (0xf << 12)) >> 12)
-} __attribute__((packed));
-
-#define USB_DT_USB_EXT_CAP_SIZE	7
-
-/*
- * SuperSpeed USB Capability descriptor: Defines the set of SuperSpeed USB
- * specific device level capabilities
- */
-#define		USB_SS_CAP_TYPE		3
-struct usb_ss_cap_descriptor {		/* Link Power Management */
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDevCapabilityType;
-	__u8  bmAttributes;
-#define USB_LTM_SUPPORT			(1 << 1) /* supports LTM */
-	__le16 wSpeedSupported;
-#define USB_LOW_SPEED_OPERATION		(1)	 /* Low speed operation */
-#define USB_FULL_SPEED_OPERATION	(1 << 1) /* Full speed operation */
-#define USB_HIGH_SPEED_OPERATION	(1 << 2) /* High speed operation */
-#define USB_5GBPS_OPERATION		(1 << 3) /* Operation at 5Gbps */
-	__u8  bFunctionalitySupport;
-	__u8  bU1devExitLat;
-	__le16 bU2DevExitLat;
-} __attribute__((packed));
-
-#define USB_DT_USB_SS_CAP_SIZE	10
-
-/*
- * Container ID Capability descriptor: Defines the instance unique ID used to
- * identify the instance across all operating modes
- */
-#define	CONTAINER_ID_TYPE	4
-struct usb_ss_container_id_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDevCapabilityType;
-	__u8  bReserved;
-	__u8  ContainerID[16]; /* 128-bit number */
-} __attribute__((packed));
-
-#define USB_DT_USB_SS_CONTN_ID_SIZE	20
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_WIRELESS_ENDPOINT_COMP:  companion descriptor associated with
- * each endpoint descriptor for a wireless device
- */
-struct usb_wireless_ep_comp_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__u8  bMaxBurst;
-	__u8  bMaxSequence;
-	__le16 wMaxStreamDelay;
-	__le16 wOverTheAirPacketSize;
-	__u8  bOverTheAirInterval;
-	__u8  bmCompAttributes;
-#define USB_ENDPOINT_SWITCH_MASK	0x03	/* in bmCompAttributes */
-#define USB_ENDPOINT_SWITCH_NO		0
-#define USB_ENDPOINT_SWITCH_SWITCH	1
-#define USB_ENDPOINT_SWITCH_SCALE	2
-} __attribute__((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless
- * host and a device for connection set up, mutual authentication, and
- * exchanging short lived session keys.  The handshake depends on a CC.
- */
-struct usb_handshake {
-	__u8 bMessageNumber;
-	__u8 bStatus;
-	__u8 tTKID[3];
-	__u8 bReserved;
-	__u8 CDID[16];
-	__u8 nonce[16];
-	__u8 MIC[8];
-} __attribute__((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC).
- * A CC may also be set up using non-wireless secure channels (including
- * wired USB!), and some devices may support CCs with multiple hosts.
- */
-struct usb_connection_context {
-	__u8 CHID[16];		/* persistent host id */
-	__u8 CDID[16];		/* device id (unique w/in host context) */
-	__u8 CK[16];		/* connection key */
-} __attribute__((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/* USB 2.0 defines three speeds, here's how Linux identifies them */
-
-enum usb_device_speed {
-	USB_SPEED_UNKNOWN = 0,			/* enumerating */
-	USB_SPEED_LOW, USB_SPEED_FULL,		/* usb 1.1 */
-	USB_SPEED_HIGH,				/* usb 2.0 */
-	USB_SPEED_WIRELESS,			/* wireless (usb 2.5) */
-	USB_SPEED_SUPER,			/* usb 3.0 */
-	USB_SPEED_SUPER_PLUS,			/* usb 3.1 */
-};
-
-
-enum usb_device_state {
-	/* NOTATTACHED isn't in the USB spec, and this state acts
-	 * the same as ATTACHED ... but it's clearer this way.
-	 */
-	USB_STATE_NOTATTACHED = 0,
-
-	/* chapter 9 and authentication (wireless) device states */
-	USB_STATE_ATTACHED,
-	USB_STATE_POWERED,			/* wired */
-	USB_STATE_RECONNECTING,			/* auth */
-	USB_STATE_UNAUTHENTICATED,		/* auth */
-	USB_STATE_DEFAULT,			/* limited function */
-	USB_STATE_ADDRESS,
-	USB_STATE_CONFIGURED,			/* most functions */
-
-	USB_STATE_SUSPENDED
-
-	/* NOTE:  there are actually four different SUSPENDED
-	 * states, returning to POWERED, DEFAULT, ADDRESS, or
-	 * CONFIGURED respectively when SOF tokens flow again.
-	 * At this level there's no difference between L1 and L2
-	 * suspend states.  (L2 being original USB 1.1 suspend.)
-	 */
+enum usb_ssp_rate {
+	USB_SSP_GEN_UNKNOWN = 0,
+	USB_SSP_GEN_2x1,
+	USB_SSP_GEN_1x2,
+	USB_SSP_GEN_2x2,
 };
 
-enum usb3_link_state {
-	USB3_LPM_U0 = 0,
-	USB3_LPM_U1,
-	USB3_LPM_U2,
-	USB3_LPM_U3
-};
-
-/*
- * A U1 timeout of 0x0 means the parent hub will reject any transitions to U1.
- * 0xff means the parent hub will accept transitions to U1, but will not
- * initiate a transition.
- *
- * A U1 timeout of 0x1 to 0x7F also causes the hub to initiate a transition to
- * U1 after that many microseconds.  Timeouts of 0x80 to 0xFE are reserved
- * values.
- *
- * A U2 timeout of 0x0 means the parent hub will reject any transitions to U2.
- * 0xff means the parent hub will accept transitions to U2, but will not
- * initiate a transition.
- *
- * A U2 timeout of 0x1 to 0xFE also causes the hub to initiate a transition to
- * U2 after N*256 microseconds.  Therefore a U2 timeout value of 0x1 means a U2
- * idle timer of 256 microseconds, 0x2 means 512 microseconds, 0xFE means
- * 65.024ms.
- */
-#define USB3_LPM_DISABLED		0x0
-#define USB3_LPM_U1_MAX_TIMEOUT		0x7F
-#define USB3_LPM_U2_MAX_TIMEOUT		0xFE
-#define USB3_LPM_DEVICE_INITIATED	0xFF
-
-struct usb_set_sel_req {
-	__u8	u1_sel;
-	__u8	u1_pel;
-	__le16	u2_sel;
-	__le16	u2_pel;
-} __attribute__ ((packed));
-
-/*
- * The Set System Exit Latency control transfer provides one byte each for
- * U1 SEL and U1 PEL, so the max exit latency is 0xFF.  U2 SEL and U2 PEL each
- * are two bytes long.
- */
-#define USB3_LPM_MAX_U1_SEL_PEL		0xFF
-#define USB3_LPM_MAX_U2_SEL_PEL		0xFFFF
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * As per USB compliance update, a device that is actively drawing
- * more than 100mA from USB must report itself as bus-powered in
- * the GetStatus(DEVICE) call.
- * http://compliance.usb.org/index.asp?UpdateFile=Electrical&Format=Standard#34
- */
-#define USB_SELF_POWER_VBUS_MAX_DRAW		100
-
-/**
- * usb_speed_string() - Returns human readable-name of the speed.
- * @speed: The speed to return human-readable name for.  If it's not
- *   any of the speeds defined in usb_device_speed enum, string for
- *   USB_SPEED_UNKNOWN will be returned.
- */
-const char *usb_speed_string(enum usb_device_speed speed);
+extern const char *usb_speed_string(enum usb_device_speed speed);
 
 /**
  * usb_speed_by_string() - Get speed from human readable name.
@@ -1036,12 +53,4 @@ const char *usb_speed_string(enum usb_device_speed speed);
  */
 enum usb_device_speed usb_speed_by_string(const char *string);
 
-/**
- * usb_state_string - Returns human readable name for the state.
- * @state: The state to return a human-readable name for. If it's not
- *      any of the states devices in usb_device_state_string enum,
- *      the string UNKNOWN will be returned.
- */
-const char *usb_state_string(enum usb_device_state state);
-
-#endif /* _UAPI__LINUX_USB_CH9_H */
+#endif /* __LINUX_USB_CH9_H */
diff --git a/include/uapi/linux/usb/ch9.h b/include/uapi/linux/usb/ch9.h
new file mode 100644
index 0000000000..b17e3a21b1
--- /dev/null
+++ b/include/uapi/linux/usb/ch9.h
@@ -0,0 +1,1265 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * This file holds USB constants and structures that are needed for
+ * USB device APIs.  These are used by the USB device model, which is
+ * defined in chapter 9 of the USB 2.0 specification and in the
+ * Wireless USB 1.0 (spread around).  Linux has several APIs in C that
+ * need these:
+ *
+ * - the master/host side Linux-USB kernel driver API;
+ * - the "usbfs" user space API; and
+ * - the Linux "gadget" slave/device/peripheral side driver API.
+ *
+ * USB 2.0 adds an additional "On The Go" (OTG) mode, which lets systems
+ * act either as a USB master/host or as a USB slave/device.  That means
+ * the master and slave side APIs benefit from working well together.
+ *
+ * There's also "Wireless USB", using low power short range radios for
+ * peripheral interconnection but otherwise building on the USB framework.
+ *
+ * Note all descriptors are declared '__attribute__((packed))' so that:
+ *
+ * [a] they never get padded, either internally (USB spec writers
+ *     probably handled that) or externally;
+ *
+ * [b] so that accessing bigger-than-a-bytes fields will never
+ *     generate bus errors on any platform, even when the location of
+ *     its descriptor inside a bundle isn't "naturally aligned", and
+ *
+ * [c] for consistency, removing all doubt even when it appears to
+ *     someone that the two other points are non-issues for that
+ *     particular descriptor type.
+ */
+
+#ifndef _UAPI__LINUX_USB_CH9_H
+#define _UAPI__LINUX_USB_CH9_H
+
+#include <linux/types.h>	/* __u8 etc */
+#include <asm/byteorder.h>	/* le16_to_cpu */
+
+/*-------------------------------------------------------------------------*/
+
+/* CONTROL REQUEST SUPPORT */
+
+/*
+ * USB directions
+ *
+ * This bit flag is used in endpoint descriptors' bEndpointAddress field.
+ * It's also one of three fields in control requests bRequestType.
+ */
+#define USB_DIR_OUT			0		/* to device */
+#define USB_DIR_IN			0x80		/* to host */
+
+/*
+ * USB types, the second of three bRequestType fields
+ */
+#define USB_TYPE_MASK			(0x03 << 5)
+#define USB_TYPE_STANDARD		(0x00 << 5)
+#define USB_TYPE_CLASS			(0x01 << 5)
+#define USB_TYPE_VENDOR			(0x02 << 5)
+#define USB_TYPE_RESERVED		(0x03 << 5)
+
+/*
+ * USB recipients, the third of three bRequestType fields
+ */
+#define USB_RECIP_MASK			0x1f
+#define USB_RECIP_DEVICE		0x00
+#define USB_RECIP_INTERFACE		0x01
+#define USB_RECIP_ENDPOINT		0x02
+#define USB_RECIP_OTHER			0x03
+/* From Wireless USB 1.0 */
+#define USB_RECIP_PORT			0x04
+#define USB_RECIP_RPIPE		0x05
+
+/*
+ * Standard requests, for the bRequest field of a SETUP packet.
+ *
+ * These are qualified by the bRequestType field, so that for example
+ * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved
+ * by a GET_STATUS request.
+ */
+#define USB_REQ_GET_STATUS		0x00
+#define USB_REQ_CLEAR_FEATURE		0x01
+#define USB_REQ_SET_FEATURE		0x03
+#define USB_REQ_SET_ADDRESS		0x05
+#define USB_REQ_GET_DESCRIPTOR		0x06
+#define USB_REQ_SET_DESCRIPTOR		0x07
+#define USB_REQ_GET_CONFIGURATION	0x08
+#define USB_REQ_SET_CONFIGURATION	0x09
+#define USB_REQ_GET_INTERFACE		0x0A
+#define USB_REQ_SET_INTERFACE		0x0B
+#define USB_REQ_SYNCH_FRAME		0x0C
+#define USB_REQ_SET_SEL			0x30
+#define USB_REQ_SET_ISOCH_DELAY		0x31
+
+#define USB_REQ_SET_ENCRYPTION		0x0D	/* Wireless USB */
+#define USB_REQ_GET_ENCRYPTION		0x0E
+#define USB_REQ_RPIPE_ABORT		0x0E
+#define USB_REQ_SET_HANDSHAKE		0x0F
+#define USB_REQ_RPIPE_RESET		0x0F
+#define USB_REQ_GET_HANDSHAKE		0x10
+#define USB_REQ_SET_CONNECTION		0x11
+#define USB_REQ_SET_SECURITY_DATA	0x12
+#define USB_REQ_GET_SECURITY_DATA	0x13
+#define USB_REQ_SET_WUSB_DATA		0x14
+#define USB_REQ_LOOPBACK_DATA_WRITE	0x15
+#define USB_REQ_LOOPBACK_DATA_READ	0x16
+#define USB_REQ_SET_INTERFACE_DS	0x17
+
+/* specific requests for USB Power Delivery */
+#define USB_REQ_GET_PARTNER_PDO		20
+#define USB_REQ_GET_BATTERY_STATUS	21
+#define USB_REQ_SET_PDO			22
+#define USB_REQ_GET_VDM			23
+#define USB_REQ_SEND_VDM		24
+
+/* The Link Power Management (LPM) ECN defines USB_REQ_TEST_AND_SET command,
+ * used by hubs to put ports into a new L1 suspend state, except that it
+ * forgot to define its number ...
+ */
+
+/*
+ * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and
+ * are read as a bit array returned by USB_REQ_GET_STATUS.  (So there
+ * are at most sixteen features of each type.)  Hubs may also support a
+ * new USB_REQ_TEST_AND_SET_FEATURE to put ports into L1 suspend.
+ */
+#define USB_DEVICE_SELF_POWERED		0	/* (read only) */
+#define USB_DEVICE_REMOTE_WAKEUP	1	/* dev may initiate wakeup */
+#define USB_DEVICE_TEST_MODE		2	/* (wired high speed only) */
+#define USB_DEVICE_BATTERY		2	/* (wireless) */
+#define USB_DEVICE_B_HNP_ENABLE		3	/* (otg) dev may initiate HNP */
+#define USB_DEVICE_WUSB_DEVICE		3	/* (wireless)*/
+#define USB_DEVICE_A_HNP_SUPPORT	4	/* (otg) RH port supports HNP */
+#define USB_DEVICE_A_ALT_HNP_SUPPORT	5	/* (otg) other RH port does */
+#define USB_DEVICE_DEBUG_MODE		6	/* (special devices only) */
+
+/*
+ * Test Mode Selectors
+ * See USB 2.0 spec Table 9-7
+ */
+#define	USB_TEST_J		1
+#define	USB_TEST_K		2
+#define	USB_TEST_SE0_NAK	3
+#define	USB_TEST_PACKET		4
+#define	USB_TEST_FORCE_ENABLE	5
+
+/* Status Type */
+#define USB_STATUS_TYPE_STANDARD	0
+#define USB_STATUS_TYPE_PTM		1
+
+/*
+ * New Feature Selectors as added by USB 3.0
+ * See USB 3.0 spec Table 9-7
+ */
+#define USB_DEVICE_U1_ENABLE	48	/* dev may initiate U1 transition */
+#define USB_DEVICE_U2_ENABLE	49	/* dev may initiate U2 transition */
+#define USB_DEVICE_LTM_ENABLE	50	/* dev may send LTM */
+#define USB_INTRF_FUNC_SUSPEND	0	/* function suspend */
+
+#define USB_INTR_FUNC_SUSPEND_OPT_MASK	0xFF00
+/*
+ * Suspend Options, Table 9-8 USB 3.0 spec
+ */
+#define USB_INTRF_FUNC_SUSPEND_LP	(1 << (8 + 0))
+#define USB_INTRF_FUNC_SUSPEND_RW	(1 << (8 + 1))
+
+/*
+ * Interface status, Figure 9-5 USB 3.0 spec
+ */
+#define USB_INTRF_STAT_FUNC_RW_CAP     1
+#define USB_INTRF_STAT_FUNC_RW         2
+
+#define USB_ENDPOINT_HALT		0	/* IN/OUT will STALL */
+
+/* Bit array elements as returned by the USB_REQ_GET_STATUS request. */
+#define USB_DEV_STAT_U1_ENABLED		2	/* transition into U1 state */
+#define USB_DEV_STAT_U2_ENABLED		3	/* transition into U2 state */
+#define USB_DEV_STAT_LTM_ENABLED	4	/* Latency tolerance messages */
+
+/*
+ * Feature selectors from Table 9-8 USB Power Delivery spec
+ */
+#define USB_DEVICE_BATTERY_WAKE_MASK	40
+#define USB_DEVICE_OS_IS_PD_AWARE	41
+#define USB_DEVICE_POLICY_MODE		42
+#define USB_PORT_PR_SWAP		43
+#define USB_PORT_GOTO_MIN		44
+#define USB_PORT_RETURN_POWER		45
+#define USB_PORT_ACCEPT_PD_REQUEST	46
+#define USB_PORT_REJECT_PD_REQUEST	47
+#define USB_PORT_PORT_PD_RESET		48
+#define USB_PORT_C_PORT_PD_CHANGE	49
+#define USB_PORT_CABLE_PD_RESET		50
+#define USB_DEVICE_CHARGING_POLICY	54
+
+/**
+ * struct usb_ctrlrequest - SETUP data for a USB device control request
+ * @bRequestType: matches the USB bmRequestType field
+ * @bRequest: matches the USB bRequest field
+ * @wValue: matches the USB wValue field (le16 byte order)
+ * @wIndex: matches the USB wIndex field (le16 byte order)
+ * @wLength: matches the USB wLength field (le16 byte order)
+ *
+ * This structure is used to send control requests to a USB device.  It matches
+ * the different fields of the USB 2.0 Spec section 9.3, table 9-2.  See the
+ * USB spec for a fuller description of the different fields, and what they are
+ * used for.
+ *
+ * Note that the driver for any interface can issue control requests.
+ * For most devices, interfaces don't coordinate with each other, so
+ * such requests may be made at any time.
+ */
+struct usb_ctrlrequest {
+	__u8 bRequestType;
+	__u8 bRequest;
+	__le16 wValue;
+	__le16 wIndex;
+	__le16 wLength;
+} __attribute__ ((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or
+ * (rarely) accepted by SET_DESCRIPTOR.
+ *
+ * Note that all multi-byte values here are encoded in little endian
+ * byte order "on the wire".  Within the kernel and when exposed
+ * through the Linux-USB APIs, they are not converted to cpu byte
+ * order; it is the responsibility of the client code to do this.
+ * The single exception is when device and configuration descriptors (but
+ * not other descriptors) are read from character devices
+ * (i.e. /dev/bus/usb/BBB/DDD);
+ * in this case the fields are converted to host endianness by the kernel.
+ */
+
+/*
+ * Descriptor types ... USB 2.0 spec table 9.5
+ */
+#define USB_DT_DEVICE			0x01
+#define USB_DT_CONFIG			0x02
+#define USB_DT_STRING			0x03
+#define USB_DT_INTERFACE		0x04
+#define USB_DT_ENDPOINT			0x05
+#define USB_DT_DEVICE_QUALIFIER		0x06
+#define USB_DT_OTHER_SPEED_CONFIG	0x07
+#define USB_DT_INTERFACE_POWER		0x08
+/* these are from a minor usb 2.0 revision (ECN) */
+#define USB_DT_OTG			0x09
+#define USB_DT_DEBUG			0x0a
+#define USB_DT_INTERFACE_ASSOCIATION	0x0b
+/* these are from the Wireless USB spec */
+#define USB_DT_SECURITY			0x0c
+#define USB_DT_KEY			0x0d
+#define USB_DT_ENCRYPTION_TYPE		0x0e
+#define USB_DT_BOS			0x0f
+#define USB_DT_DEVICE_CAPABILITY	0x10
+#define USB_DT_WIRELESS_ENDPOINT_COMP	0x11
+#define USB_DT_WIRE_ADAPTER		0x21
+#define USB_DT_RPIPE			0x22
+#define USB_DT_CS_RADIO_CONTROL		0x23
+/* From the T10 UAS specification */
+#define USB_DT_PIPE_USAGE		0x24
+/* From the USB 3.0 spec */
+#define	USB_DT_SS_ENDPOINT_COMP		0x30
+/* From the USB 3.1 spec */
+#define	USB_DT_SSP_ISOC_ENDPOINT_COMP	0x31
+
+/* Conventional codes for class-specific descriptors.  The convention is
+ * defined in the USB "Common Class" Spec (3.11).  Individual class specs
+ * are authoritative for their usage, not the "common class" writeup.
+ */
+#define USB_DT_CS_DEVICE		(USB_TYPE_CLASS | USB_DT_DEVICE)
+#define USB_DT_CS_CONFIG		(USB_TYPE_CLASS | USB_DT_CONFIG)
+#define USB_DT_CS_STRING		(USB_TYPE_CLASS | USB_DT_STRING)
+#define USB_DT_CS_INTERFACE		(USB_TYPE_CLASS | USB_DT_INTERFACE)
+#define USB_DT_CS_ENDPOINT		(USB_TYPE_CLASS | USB_DT_ENDPOINT)
+
+/* All standard descriptors have these 2 fields at the beginning */
+struct usb_descriptor_header {
+	__u8  bLength;
+	__u8  bDescriptorType;
+} __attribute__ ((packed));
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_DEVICE: Device descriptor */
+struct usb_device_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__le16 bcdUSB;
+	__u8  bDeviceClass;
+	__u8  bDeviceSubClass;
+	__u8  bDeviceProtocol;
+	__u8  bMaxPacketSize0;
+	__le16 idVendor;
+	__le16 idProduct;
+	__le16 bcdDevice;
+	__u8  iManufacturer;
+	__u8  iProduct;
+	__u8  iSerialNumber;
+	__u8  bNumConfigurations;
+} __attribute__ ((packed));
+
+#define USB_DT_DEVICE_SIZE		18
+
+
+/*
+ * Device and/or Interface Class codes
+ * as found in bDeviceClass or bInterfaceClass
+ * and defined by www.usb.org documents
+ */
+#define USB_CLASS_PER_INTERFACE		0	/* for DeviceClass */
+#define USB_CLASS_AUDIO			1
+#define USB_CLASS_COMM			2
+#define USB_CLASS_HID			3
+#define USB_CLASS_PHYSICAL		5
+#define USB_CLASS_STILL_IMAGE		6
+#define USB_CLASS_PRINTER		7
+#define USB_CLASS_MASS_STORAGE		8
+#define USB_CLASS_HUB			9
+#define USB_CLASS_CDC_DATA		0x0a
+#define USB_CLASS_CSCID			0x0b	/* chip+ smart card */
+#define USB_CLASS_CONTENT_SEC		0x0d	/* content security */
+#define USB_CLASS_VIDEO			0x0e
+#define USB_CLASS_WIRELESS_CONTROLLER	0xe0
+#define USB_CLASS_PERSONAL_HEALTHCARE	0x0f
+#define USB_CLASS_AUDIO_VIDEO		0x10
+#define USB_CLASS_BILLBOARD		0x11
+#define USB_CLASS_USB_TYPE_C_BRIDGE	0x12
+#define USB_CLASS_MISC			0xef
+#define USB_CLASS_APP_SPEC		0xfe
+#define USB_CLASS_VENDOR_SPEC		0xff
+
+#define USB_SUBCLASS_VENDOR_SPEC	0xff
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_CONFIG: Configuration descriptor information.
+ *
+ * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the
+ * descriptor type is different.  Highspeed-capable devices can look
+ * different depending on what speed they're currently running.  Only
+ * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG
+ * descriptors.
+ */
+struct usb_config_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__le16 wTotalLength;
+	__u8  bNumInterfaces;
+	__u8  bConfigurationValue;
+	__u8  iConfiguration;
+	__u8  bmAttributes;
+	__u8  bMaxPower;
+} __attribute__ ((packed));
+
+#define USB_DT_CONFIG_SIZE		9
+
+/* from config descriptor bmAttributes */
+#define USB_CONFIG_ATT_ONE		(1 << 7)	/* must be set */
+#define USB_CONFIG_ATT_SELFPOWER	(1 << 6)	/* self powered */
+#define USB_CONFIG_ATT_WAKEUP		(1 << 5)	/* can wakeup */
+#define USB_CONFIG_ATT_BATTERY		(1 << 4)	/* battery powered */
+
+/*-------------------------------------------------------------------------*/
+
+/* USB String descriptors can contain at most 126 characters. */
+#define USB_MAX_STRING_LEN	126
+
+/* USB_DT_STRING: String descriptor */
+struct usb_string_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__le16 wData[1];		/* UTF-16LE encoded */
+} __attribute__ ((packed));
+
+/* note that "string" zero is special, it holds language codes that
+ * the device supports, not Unicode characters.
+ */
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_INTERFACE: Interface descriptor */
+struct usb_interface_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__u8  bInterfaceNumber;
+	__u8  bAlternateSetting;
+	__u8  bNumEndpoints;
+	__u8  bInterfaceClass;
+	__u8  bInterfaceSubClass;
+	__u8  bInterfaceProtocol;
+	__u8  iInterface;
+} __attribute__ ((packed));
+
+#define USB_DT_INTERFACE_SIZE		9
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_ENDPOINT: Endpoint descriptor */
+struct usb_endpoint_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__u8  bEndpointAddress;
+	__u8  bmAttributes;
+	__le16 wMaxPacketSize;
+	__u8  bInterval;
+
+	/* NOTE:  these two are _only_ in audio endpoints. */
+	/* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */
+	__u8  bRefresh;
+	__u8  bSynchAddress;
+} __attribute__ ((packed));
+
+#define USB_DT_ENDPOINT_SIZE		7
+#define USB_DT_ENDPOINT_AUDIO_SIZE	9	/* Audio extension */
+
+
+/*
+ * Endpoints
+ */
+#define USB_ENDPOINT_NUMBER_MASK	0x0f	/* in bEndpointAddress */
+#define USB_ENDPOINT_DIR_MASK		0x80
+
+#define USB_ENDPOINT_XFERTYPE_MASK	0x03	/* in bmAttributes */
+#define USB_ENDPOINT_XFER_CONTROL	0
+#define USB_ENDPOINT_XFER_ISOC		1
+#define USB_ENDPOINT_XFER_BULK		2
+#define USB_ENDPOINT_XFER_INT		3
+#define USB_ENDPOINT_MAX_ADJUSTABLE	0x80
+
+#define USB_ENDPOINT_MAXP_MASK	0x07ff
+#define USB_EP_MAXP_MULT_SHIFT	11
+#define USB_EP_MAXP_MULT_MASK	(3 << USB_EP_MAXP_MULT_SHIFT)
+#define USB_EP_MAXP_MULT(m) \
+	(((m) & USB_EP_MAXP_MULT_MASK) >> USB_EP_MAXP_MULT_SHIFT)
+
+/* The USB 3.0 spec redefines bits 5:4 of bmAttributes as interrupt ep type. */
+#define USB_ENDPOINT_INTRTYPE		0x30
+#define USB_ENDPOINT_INTR_PERIODIC	(0 << 4)
+#define USB_ENDPOINT_INTR_NOTIFICATION	(1 << 4)
+
+#define USB_ENDPOINT_SYNCTYPE		0x0c
+#define USB_ENDPOINT_SYNC_NONE		(0 << 2)
+#define USB_ENDPOINT_SYNC_ASYNC		(1 << 2)
+#define USB_ENDPOINT_SYNC_ADAPTIVE	(2 << 2)
+#define USB_ENDPOINT_SYNC_SYNC		(3 << 2)
+
+#define USB_ENDPOINT_USAGE_MASK		0x30
+#define USB_ENDPOINT_USAGE_DATA		0x00
+#define USB_ENDPOINT_USAGE_FEEDBACK	0x10
+#define USB_ENDPOINT_USAGE_IMPLICIT_FB	0x20	/* Implicit feedback Data endpoint */
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * usb_endpoint_num - get the endpoint's number
+ * @epd: endpoint to be checked
+ *
+ * Returns @epd's number: 0 to 15.
+ */
+static inline int usb_endpoint_num(const struct usb_endpoint_descriptor *epd)
+{
+	return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+}
+
+/**
+ * usb_endpoint_type - get the endpoint's transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns one of USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT} according
+ * to @epd's transfer type.
+ */
+static inline int usb_endpoint_type(const struct usb_endpoint_descriptor *epd)
+{
+	return epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+}
+
+/**
+ * usb_endpoint_dir_in - check if the endpoint has IN direction
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type IN, otherwise it returns false.
+ */
+static inline int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd)
+{
+	return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN);
+}
+
+/**
+ * usb_endpoint_dir_out - check if the endpoint has OUT direction
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type OUT, otherwise it returns false.
+ */
+static inline int usb_endpoint_dir_out(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT);
+}
+
+/**
+ * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type bulk, otherwise it returns false.
+ */
+static inline int usb_endpoint_xfer_bulk(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+		USB_ENDPOINT_XFER_BULK);
+}
+
+/**
+ * usb_endpoint_xfer_control - check if the endpoint has control transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type control, otherwise it returns false.
+ */
+static inline int usb_endpoint_xfer_control(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+		USB_ENDPOINT_XFER_CONTROL);
+}
+
+/**
+ * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type interrupt, otherwise it returns
+ * false.
+ */
+static inline int usb_endpoint_xfer_int(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+		USB_ENDPOINT_XFER_INT);
+}
+
+/**
+ * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type isochronous, otherwise it returns
+ * false.
+ */
+static inline int usb_endpoint_xfer_isoc(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+		USB_ENDPOINT_XFER_ISOC);
+}
+
+/**
+ * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has bulk transfer type and IN direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_bulk_in(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd);
+}
+
+/**
+ * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has bulk transfer type and OUT direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_bulk_out(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd);
+}
+
+/**
+ * usb_endpoint_is_int_in - check if the endpoint is interrupt IN
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has interrupt transfer type and IN direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_int_in(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd);
+}
+
+/**
+ * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has interrupt transfer type and OUT direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_int_out(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd);
+}
+
+/**
+ * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has isochronous transfer type and IN direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_isoc_in(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd);
+}
+
+/**
+ * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has isochronous transfer type and OUT direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_isoc_out(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd);
+}
+
+/**
+ * usb_endpoint_maxp - get endpoint's max packet size
+ * @epd: endpoint to be checked
+ *
+ * Returns @epd's max packet bits [10:0]
+ */
+static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd)
+{
+	return __le16_to_cpu(epd->wMaxPacketSize) & USB_ENDPOINT_MAXP_MASK;
+}
+
+/**
+ * usb_endpoint_maxp_mult - get endpoint's transactional opportunities
+ * @epd: endpoint to be checked
+ *
+ * Return @epd's wMaxPacketSize[12:11] + 1
+ */
+static inline int
+usb_endpoint_maxp_mult(const struct usb_endpoint_descriptor *epd)
+{
+	int maxp = __le16_to_cpu(epd->wMaxPacketSize);
+
+	return USB_EP_MAXP_MULT(maxp) + 1;
+}
+
+static inline int usb_endpoint_interrupt_type(
+		const struct usb_endpoint_descriptor *epd)
+{
+	return epd->bmAttributes & USB_ENDPOINT_INTRTYPE;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_SSP_ISOC_ENDPOINT_COMP: SuperSpeedPlus Isochronous Endpoint Companion
+ * descriptor
+ */
+struct usb_ssp_isoc_ep_comp_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__le16 wReseved;
+	__le32 dwBytesPerInterval;
+} __attribute__ ((packed));
+
+#define USB_DT_SSP_ISOC_EP_COMP_SIZE		8
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */
+struct usb_ss_ep_comp_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__u8  bMaxBurst;
+	__u8  bmAttributes;
+	__le16 wBytesPerInterval;
+} __attribute__ ((packed));
+
+#define USB_DT_SS_EP_COMP_SIZE		6
+
+/* Bits 4:0 of bmAttributes if this is a bulk endpoint */
+static inline int
+usb_ss_max_streams(const struct usb_ss_ep_comp_descriptor *comp)
+{
+	int		max_streams;
+
+	if (!comp)
+		return 0;
+
+	max_streams = comp->bmAttributes & 0x1f;
+
+	if (!max_streams)
+		return 0;
+
+	max_streams = 1 << max_streams;
+
+	return max_streams;
+}
+
+/* Bits 1:0 of bmAttributes if this is an isoc endpoint */
+#define USB_SS_MULT(p)			(1 + ((p) & 0x3))
+/* Bit 7 of bmAttributes if a SSP isoc endpoint companion descriptor exists */
+#define USB_SS_SSP_ISOC_COMP(p)		((p) & (1 << 7))
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */
+struct usb_qualifier_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__le16 bcdUSB;
+	__u8  bDeviceClass;
+	__u8  bDeviceSubClass;
+	__u8  bDeviceProtocol;
+	__u8  bMaxPacketSize0;
+	__u8  bNumConfigurations;
+	__u8  bRESERVED;
+} __attribute__ ((packed));
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_OTG (from OTG 1.0a supplement) */
+struct usb_otg_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__u8  bmAttributes;	/* support for HNP, SRP, etc */
+} __attribute__ ((packed));
+
+/* USB_DT_OTG (from OTG 2.0 supplement) */
+struct usb_otg20_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__u8  bmAttributes;	/* support for HNP, SRP and ADP, etc */
+	__le16 bcdOTG;		/* OTG and EH supplement release number
+				 * in binary-coded decimal(i.e. 2.0 is 0200H)
+				 */
+} __attribute__ ((packed));
+
+/* from usb_otg_descriptor.bmAttributes */
+#define USB_OTG_SRP		(1 << 0)
+#define USB_OTG_HNP		(1 << 1)	/* swap host/device roles */
+#define USB_OTG_ADP		(1 << 2)	/* support ADP */
+
+#define OTG_STS_SELECTOR	0xF000		/* OTG status selector */
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_DEBUG:  for special highspeed devices, replacing serial console */
+struct usb_debug_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	/* bulk endpoints with 8 byte maxpacket */
+	__u8  bDebugInEndpoint;
+	__u8  bDebugOutEndpoint;
+} __attribute__((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */
+struct usb_interface_assoc_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__u8  bFirstInterface;
+	__u8  bInterfaceCount;
+	__u8  bFunctionClass;
+	__u8  bFunctionSubClass;
+	__u8  bFunctionProtocol;
+	__u8  iFunction;
+} __attribute__ ((packed));
+
+#define USB_DT_INTERFACE_ASSOCIATION_SIZE	8
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_SECURITY:  group of wireless security descriptors, including
+ * encryption types available for setting up a CC/association.
+ */
+struct usb_security_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__le16 wTotalLength;
+	__u8  bNumEncryptionTypes;
+} __attribute__((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_KEY:  used with {GET,SET}_SECURITY_DATA; only public keys
+ * may be retrieved.
+ */
+struct usb_key_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__u8  tTKID[3];
+	__u8  bReserved;
+	__u8  bKeyData[];
+} __attribute__((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_ENCRYPTION_TYPE:  bundled in DT_SECURITY groups */
+struct usb_encryption_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__u8  bEncryptionType;
+#define	USB_ENC_TYPE_UNSECURE		0
+#define	USB_ENC_TYPE_WIRED		1	/* non-wireless mode */
+#define	USB_ENC_TYPE_CCM_1		2	/* aes128/cbc session */
+#define	USB_ENC_TYPE_RSA_1		3	/* rsa3072/sha1 auth */
+	__u8  bEncryptionValue;		/* use in SET_ENCRYPTION */
+	__u8  bAuthKeyIndex;
+} __attribute__((packed));
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_BOS:  group of device-level capabilities */
+struct usb_bos_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__le16 wTotalLength;
+	__u8  bNumDeviceCaps;
+} __attribute__((packed));
+
+#define USB_DT_BOS_SIZE		5
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_DEVICE_CAPABILITY:  grouped with BOS */
+struct usb_dev_cap_header {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDevCapabilityType;
+} __attribute__((packed));
+
+#define	USB_CAP_TYPE_WIRELESS_USB	1
+
+struct usb_wireless_cap_descriptor {	/* Ultra Wide Band */
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDevCapabilityType;
+
+	__u8  bmAttributes;
+#define	USB_WIRELESS_P2P_DRD		(1 << 1)
+#define	USB_WIRELESS_BEACON_MASK	(3 << 2)
+#define	USB_WIRELESS_BEACON_SELF	(1 << 2)
+#define	USB_WIRELESS_BEACON_DIRECTED	(2 << 2)
+#define	USB_WIRELESS_BEACON_NONE	(3 << 2)
+	__le16 wPHYRates;	/* bit rates, Mbps */
+#define	USB_WIRELESS_PHY_53		(1 << 0)	/* always set */
+#define	USB_WIRELESS_PHY_80		(1 << 1)
+#define	USB_WIRELESS_PHY_107		(1 << 2)	/* always set */
+#define	USB_WIRELESS_PHY_160		(1 << 3)
+#define	USB_WIRELESS_PHY_200		(1 << 4)	/* always set */
+#define	USB_WIRELESS_PHY_320		(1 << 5)
+#define	USB_WIRELESS_PHY_400		(1 << 6)
+#define	USB_WIRELESS_PHY_480		(1 << 7)
+	__u8  bmTFITXPowerInfo;	/* TFI power levels */
+	__u8  bmFFITXPowerInfo;	/* FFI power levels */
+	__le16 bmBandGroup;
+	__u8  bReserved;
+} __attribute__((packed));
+
+#define USB_DT_USB_WIRELESS_CAP_SIZE	11
+
+/* USB 2.0 Extension descriptor */
+#define	USB_CAP_TYPE_EXT		2
+
+struct usb_ext_cap_descriptor {		/* Link Power Management */
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDevCapabilityType;
+	__le32 bmAttributes;
+#define USB_LPM_SUPPORT			(1 << 1)	/* supports LPM */
+#define USB_BESL_SUPPORT		(1 << 2)	/* supports BESL */
+#define USB_BESL_BASELINE_VALID		(1 << 3)	/* Baseline BESL valid*/
+#define USB_BESL_DEEP_VALID		(1 << 4)	/* Deep BESL valid */
+#define USB_SET_BESL_BASELINE(p)	(((p) & 0xf) << 8)
+#define USB_SET_BESL_DEEP(p)		(((p) & 0xf) << 12)
+#define USB_GET_BESL_BASELINE(p)	(((p) & (0xf << 8)) >> 8)
+#define USB_GET_BESL_DEEP(p)		(((p) & (0xf << 12)) >> 12)
+} __attribute__((packed));
+
+#define USB_DT_USB_EXT_CAP_SIZE	7
+
+/*
+ * SuperSpeed USB Capability descriptor: Defines the set of SuperSpeed USB
+ * specific device level capabilities
+ */
+#define		USB_SS_CAP_TYPE		3
+struct usb_ss_cap_descriptor {		/* Link Power Management */
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDevCapabilityType;
+	__u8  bmAttributes;
+#define USB_LTM_SUPPORT			(1 << 1) /* supports LTM */
+	__le16 wSpeedSupported;
+#define USB_LOW_SPEED_OPERATION		(1)	 /* Low speed operation */
+#define USB_FULL_SPEED_OPERATION	(1 << 1) /* Full speed operation */
+#define USB_HIGH_SPEED_OPERATION	(1 << 2) /* High speed operation */
+#define USB_5GBPS_OPERATION		(1 << 3) /* Operation at 5Gbps */
+	__u8  bFunctionalitySupport;
+	__u8  bU1devExitLat;
+	__le16 bU2DevExitLat;
+} __attribute__((packed));
+
+#define USB_DT_USB_SS_CAP_SIZE	10
+
+/*
+ * Container ID Capability descriptor: Defines the instance unique ID used to
+ * identify the instance across all operating modes
+ */
+#define	CONTAINER_ID_TYPE	4
+struct usb_ss_container_id_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDevCapabilityType;
+	__u8  bReserved;
+	__u8  ContainerID[16]; /* 128-bit number */
+} __attribute__((packed));
+
+#define USB_DT_USB_SS_CONTN_ID_SIZE	20
+
+/*
+ * Platform Device Capability descriptor: Defines platform specific device
+ * capabilities
+ */
+#define	USB_PLAT_DEV_CAP_TYPE	5
+struct usb_plat_dev_cap_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDevCapabilityType;
+	__u8  bReserved;
+	__u8  UUID[16];
+	__u8  CapabilityData[];
+} __attribute__((packed));
+
+#define USB_DT_USB_PLAT_DEV_CAP_SIZE(capability_data_size)	(20 + capability_data_size)
+
+/*
+ * SuperSpeed Plus USB Capability descriptor: Defines the set of
+ * SuperSpeed Plus USB specific device level capabilities
+ */
+#define	USB_SSP_CAP_TYPE	0xa
+struct usb_ssp_cap_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDevCapabilityType;
+	__u8  bReserved;
+	__le32 bmAttributes;
+#define USB_SSP_SUBLINK_SPEED_ATTRIBS	(0x1f << 0) /* sublink speed entries */
+#define USB_SSP_SUBLINK_SPEED_IDS	(0xf << 5)  /* speed ID entries */
+	__le16  wFunctionalitySupport;
+#define USB_SSP_MIN_SUBLINK_SPEED_ATTRIBUTE_ID	(0xf)
+#define USB_SSP_MIN_RX_LANE_COUNT		(0xf << 8)
+#define USB_SSP_MIN_TX_LANE_COUNT		(0xf << 12)
+	__le16 wReserved;
+	__le32 bmSublinkSpeedAttr[1]; /* list of sublink speed attrib entries */
+#define USB_SSP_SUBLINK_SPEED_SSID	(0xf)		/* sublink speed ID */
+#define USB_SSP_SUBLINK_SPEED_LSE	(0x3 << 4)	/* Lanespeed exponent */
+#define USB_SSP_SUBLINK_SPEED_LSE_BPS		0
+#define USB_SSP_SUBLINK_SPEED_LSE_KBPS		1
+#define USB_SSP_SUBLINK_SPEED_LSE_MBPS		2
+#define USB_SSP_SUBLINK_SPEED_LSE_GBPS		3
+
+#define USB_SSP_SUBLINK_SPEED_ST	(0x3 << 6)	/* Sublink type */
+#define USB_SSP_SUBLINK_SPEED_ST_SYM_RX		0
+#define USB_SSP_SUBLINK_SPEED_ST_ASYM_RX	1
+#define USB_SSP_SUBLINK_SPEED_ST_SYM_TX		2
+#define USB_SSP_SUBLINK_SPEED_ST_ASYM_TX	3
+
+#define USB_SSP_SUBLINK_SPEED_RSVD	(0x3f << 8)	/* Reserved */
+#define USB_SSP_SUBLINK_SPEED_LP	(0x3 << 14)	/* Link protocol */
+#define USB_SSP_SUBLINK_SPEED_LP_SS		0
+#define USB_SSP_SUBLINK_SPEED_LP_SSP		1
+
+#define USB_SSP_SUBLINK_SPEED_LSM	(0xff << 16)	/* Lanespeed mantissa */
+} __attribute__((packed));
+
+/*
+ * USB Power Delivery Capability Descriptor:
+ * Defines capabilities for PD
+ */
+/* Defines the various PD Capabilities of this device */
+#define USB_PD_POWER_DELIVERY_CAPABILITY	0x06
+/* Provides information on each battery supported by the device */
+#define USB_PD_BATTERY_INFO_CAPABILITY		0x07
+/* The Consumer characteristics of a Port on the device */
+#define USB_PD_PD_CONSUMER_PORT_CAPABILITY	0x08
+/* The provider characteristics of a Port on the device */
+#define USB_PD_PD_PROVIDER_PORT_CAPABILITY	0x09
+
+struct usb_pd_cap_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDevCapabilityType; /* set to USB_PD_POWER_DELIVERY_CAPABILITY */
+	__u8  bReserved;
+	__le32 bmAttributes;
+#define USB_PD_CAP_BATTERY_CHARGING	(1 << 1) /* supports Battery Charging specification */
+#define USB_PD_CAP_USB_PD		(1 << 2) /* supports USB Power Delivery specification */
+#define USB_PD_CAP_PROVIDER		(1 << 3) /* can provide power */
+#define USB_PD_CAP_CONSUMER		(1 << 4) /* can consume power */
+#define USB_PD_CAP_CHARGING_POLICY	(1 << 5) /* supports CHARGING_POLICY feature */
+#define USB_PD_CAP_TYPE_C_CURRENT	(1 << 6) /* supports power capabilities defined in the USB Type-C Specification */
+
+#define USB_PD_CAP_PWR_AC		(1 << 8)
+#define USB_PD_CAP_PWR_BAT		(1 << 9)
+#define USB_PD_CAP_PWR_USE_V_BUS	(1 << 14)
+
+	__le16 bmProviderPorts; /* Bit zero refers to the UFP of the device */
+	__le16 bmConsumerPorts;
+	__le16 bcdBCVersion;
+	__le16 bcdPDVersion;
+	__le16 bcdUSBTypeCVersion;
+} __attribute__((packed));
+
+struct usb_pd_cap_battery_info_descriptor {
+	__u8 bLength;
+	__u8 bDescriptorType;
+	__u8 bDevCapabilityType;
+	/* Index of string descriptor shall contain the user friendly name for this battery */
+	__u8 iBattery;
+	/* Index of string descriptor shall contain the Serial Number String for this battery */
+	__u8 iSerial;
+	__u8 iManufacturer;
+	__u8 bBatteryId; /* uniquely identifies this battery in status Messages */
+	__u8 bReserved;
+	/*
+	 * Shall contain the Battery Charge value above which this
+	 * battery is considered to be fully charged but not necessarily
+	 * “topped off.”
+	 */
+	__le32 dwChargedThreshold; /* in mWh */
+	/*
+	 * Shall contain the minimum charge level of this battery such
+	 * that above this threshold, a device can be assured of being
+	 * able to power up successfully (see Battery Charging 1.2).
+	 */
+	__le32 dwWeakThreshold; /* in mWh */
+	__le32 dwBatteryDesignCapacity; /* in mWh */
+	__le32 dwBatteryLastFullchargeCapacity; /* in mWh */
+} __attribute__((packed));
+
+struct usb_pd_cap_consumer_port_descriptor {
+	__u8 bLength;
+	__u8 bDescriptorType;
+	__u8 bDevCapabilityType;
+	__u8 bReserved;
+	__u8 bmCapabilities;
+/* port will oerate under: */
+#define USB_PD_CAP_CONSUMER_BC		(1 << 0) /* BC */
+#define USB_PD_CAP_CONSUMER_PD		(1 << 1) /* PD */
+#define USB_PD_CAP_CONSUMER_TYPE_C	(1 << 2) /* USB Type-C Current */
+	__le16 wMinVoltage; /* in 50mV units */
+	__le16 wMaxVoltage; /* in 50mV units */
+	__u16 wReserved;
+	__le32 dwMaxOperatingPower; /* in 10 mW - operating at steady state */
+	__le32 dwMaxPeakPower; /* in 10mW units - operating at peak power */
+	__le32 dwMaxPeakPowerTime; /* in 100ms units - duration of peak */
+#define USB_PD_CAP_CONSUMER_UNKNOWN_PEAK_POWER_TIME 0xffff
+} __attribute__((packed));
+
+struct usb_pd_cap_provider_port_descriptor {
+	__u8 bLength;
+	__u8 bDescriptorType;
+	__u8 bDevCapabilityType;
+	__u8 bReserved1;
+	__u8 bmCapabilities;
+/* port will oerate under: */
+#define USB_PD_CAP_PROVIDER_BC		(1 << 0) /* BC */
+#define USB_PD_CAP_PROVIDER_PD		(1 << 1) /* PD */
+#define USB_PD_CAP_PROVIDER_TYPE_C	(1 << 2) /* USB Type-C Current */
+	__u8 bNumOfPDObjects;
+	__u8 bReserved2;
+	__le32 wPowerDataObject[];
+} __attribute__((packed));
+
+/*
+ * Precision time measurement capability descriptor: advertised by devices and
+ * hubs that support PTM
+ */
+#define	USB_PTM_CAP_TYPE	0xb
+struct usb_ptm_cap_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDevCapabilityType;
+} __attribute__((packed));
+
+#define USB_DT_USB_PTM_ID_SIZE		3
+/*
+ * The size of the descriptor for the Sublink Speed Attribute Count
+ * (SSAC) specified in bmAttributes[4:0]. SSAC is zero-based
+ */
+#define USB_DT_USB_SSP_CAP_SIZE(ssac)	(12 + (ssac + 1) * 4)
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_WIRELESS_ENDPOINT_COMP:  companion descriptor associated with
+ * each endpoint descriptor for a wireless device
+ */
+struct usb_wireless_ep_comp_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__u8  bMaxBurst;
+	__u8  bMaxSequence;
+	__le16 wMaxStreamDelay;
+	__le16 wOverTheAirPacketSize;
+	__u8  bOverTheAirInterval;
+	__u8  bmCompAttributes;
+#define USB_ENDPOINT_SWITCH_MASK	0x03	/* in bmCompAttributes */
+#define USB_ENDPOINT_SWITCH_NO		0
+#define USB_ENDPOINT_SWITCH_SWITCH	1
+#define USB_ENDPOINT_SWITCH_SCALE	2
+} __attribute__((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless
+ * host and a device for connection set up, mutual authentication, and
+ * exchanging short lived session keys.  The handshake depends on a CC.
+ */
+struct usb_handshake {
+	__u8 bMessageNumber;
+	__u8 bStatus;
+	__u8 tTKID[3];
+	__u8 bReserved;
+	__u8 CDID[16];
+	__u8 nonce[16];
+	__u8 MIC[8];
+} __attribute__((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC).
+ * A CC may also be set up using non-wireless secure channels (including
+ * wired USB!), and some devices may support CCs with multiple hosts.
+ */
+struct usb_connection_context {
+	__u8 CHID[16];		/* persistent host id */
+	__u8 CDID[16];		/* device id (unique w/in host context) */
+	__u8 CK[16];		/* connection key */
+} __attribute__((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/* USB 2.0 defines three speeds, here's how Linux identifies them */
+
+enum usb_device_speed {
+	USB_SPEED_UNKNOWN = 0,			/* enumerating */
+	USB_SPEED_LOW, USB_SPEED_FULL,		/* usb 1.1 */
+	USB_SPEED_HIGH,				/* usb 2.0 */
+	USB_SPEED_WIRELESS,			/* wireless (usb 2.5) */
+	USB_SPEED_SUPER,			/* usb 3.0 */
+	USB_SPEED_SUPER_PLUS,			/* usb 3.1 */
+};
+
+
+enum usb_device_state {
+	/* NOTATTACHED isn't in the USB spec, and this state acts
+	 * the same as ATTACHED ... but it's clearer this way.
+	 */
+	USB_STATE_NOTATTACHED = 0,
+
+	/* chapter 9 and authentication (wireless) device states */
+	USB_STATE_ATTACHED,
+	USB_STATE_POWERED,			/* wired */
+	USB_STATE_RECONNECTING,			/* auth */
+	USB_STATE_UNAUTHENTICATED,		/* auth */
+	USB_STATE_DEFAULT,			/* limited function */
+	USB_STATE_ADDRESS,
+	USB_STATE_CONFIGURED,			/* most functions */
+
+	USB_STATE_SUSPENDED
+
+	/* NOTE:  there are actually four different SUSPENDED
+	 * states, returning to POWERED, DEFAULT, ADDRESS, or
+	 * CONFIGURED respectively when SOF tokens flow again.
+	 * At this level there's no difference between L1 and L2
+	 * suspend states.  (L2 being original USB 1.1 suspend.)
+	 */
+};
+
+enum usb3_link_state {
+	USB3_LPM_U0 = 0,
+	USB3_LPM_U1,
+	USB3_LPM_U2,
+	USB3_LPM_U3
+};
+
+/*
+ * A U1 timeout of 0x0 means the parent hub will reject any transitions to U1.
+ * 0xff means the parent hub will accept transitions to U1, but will not
+ * initiate a transition.
+ *
+ * A U1 timeout of 0x1 to 0x7F also causes the hub to initiate a transition to
+ * U1 after that many microseconds.  Timeouts of 0x80 to 0xFE are reserved
+ * values.
+ *
+ * A U2 timeout of 0x0 means the parent hub will reject any transitions to U2.
+ * 0xff means the parent hub will accept transitions to U2, but will not
+ * initiate a transition.
+ *
+ * A U2 timeout of 0x1 to 0xFE also causes the hub to initiate a transition to
+ * U2 after N*256 microseconds.  Therefore a U2 timeout value of 0x1 means a U2
+ * idle timer of 256 microseconds, 0x2 means 512 microseconds, 0xFE means
+ * 65.024ms.
+ */
+#define USB3_LPM_DISABLED		0x0
+#define USB3_LPM_U1_MAX_TIMEOUT		0x7F
+#define USB3_LPM_U2_MAX_TIMEOUT		0xFE
+#define USB3_LPM_DEVICE_INITIATED	0xFF
+
+struct usb_set_sel_req {
+	__u8	u1_sel;
+	__u8	u1_pel;
+	__le16	u2_sel;
+	__le16	u2_pel;
+} __attribute__ ((packed));
+
+/*
+ * The Set System Exit Latency control transfer provides one byte each for
+ * U1 SEL and U1 PEL, so the max exit latency is 0xFF.  U2 SEL and U2 PEL each
+ * are two bytes long.
+ */
+#define USB3_LPM_MAX_U1_SEL_PEL		0xFF
+#define USB3_LPM_MAX_U2_SEL_PEL		0xFFFF
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * As per USB compliance update, a device that is actively drawing
+ * more than 100mA from USB must report itself as bus-powered in
+ * the GetStatus(DEVICE) call.
+ * https://compliance.usb.org/index.asp?UpdateFile=Electrical&Format=Standard#34
+ */
+#define USB_SELF_POWER_VBUS_MAX_DRAW		100
+
+#endif /* _UAPI__LINUX_USB_CH9_H */