diff options
author | John Watts <contact@jookia.org> | 2023-01-22 01:44:27 +1100 |
---|---|---|
committer | Sascha Hauer <s.hauer@pengutronix.de> | 2023-01-25 09:25:57 +0100 |
commit | 979aa588ddba3fbd5fd694842dbe54f5261f6b83 (patch) | |
tree | 76f12d2be7cb5f922ef3aa518081dd7839b235a1 /common | |
parent | 0731741b3d3b7b4bbd15579612a90e0a71858920 (diff) | |
download | barebox-979aa588ddba3fbd5fd694842dbe54f5261f6b83.tar.gz |
ddr_dimms: Move ddr*_dimm_params to common
This code is no longer specific to the any board.
Also make ddr2_speed_bins static to not break PowerPC compilation
Signed-off-by: John Watts <contact@jookia.org>
Link: https://lore.barebox.org/20230121144429.3524905-6-contact@jookia.org
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'common')
-rw-r--r-- | common/Makefile | 4 | ||||
-rw-r--r-- | common/ddr1_dimm_params.c | 318 | ||||
-rw-r--r-- | common/ddr2_dimm_params.c | 319 | ||||
-rw-r--r-- | common/ddr3_dimm_params.c | 324 | ||||
-rw-r--r-- | common/ddr4_dimm_params.c | 351 |
5 files changed, 1316 insertions, 0 deletions
diff --git a/common/Makefile b/common/Makefile index bd5b50bc3b..8dc475f324 100644 --- a/common/Makefile +++ b/common/Makefile @@ -33,6 +33,10 @@ obj-$(CONFIG_CONSOLE_FULL) += console.o obj-$(CONFIG_CONSOLE_SIMPLE) += console_simple.o obj-y += console_countdown.o obj-pbl-$(CONFIG_DDR_SPD) += ddr_spd.o +obj-pbl-$(CONFIG_DDR_SPD) += ddr1_dimm_params.o +obj-pbl-$(CONFIG_DDR_SPD) += ddr2_dimm_params.o +obj-pbl-$(CONFIG_DDR_SPD) += ddr3_dimm_params.o +obj-pbl-$(CONFIG_DDR_SPD) += ddr4_dimm_params.o obj-$(CONFIG_ENV_HANDLING) += environment.o envfs-core.o obj-$(CONFIG_DEFAULT_ENVIRONMENT) += envfs-core.o obj-$(CONFIG_ENVIRONMENT_VARIABLES) += env.o diff --git a/common/ddr1_dimm_params.c b/common/ddr1_dimm_params.c new file mode 100644 index 0000000000..3f8759c351 --- /dev/null +++ b/common/ddr1_dimm_params.c @@ -0,0 +1,318 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2008 Freescale Semiconductor, Inc. + */ +#include <common.h> +#include <linux/log2.h> +#include <ddr_dimms.h> + +/* + * Calculate the Density of each Physical Rank. + * Returned size is in bytes. + * + * Study these table from Byte 31 of JEDEC SPD Spec. + * + * DDR I DDR II + * Bit Size Size + * --- ----- ------ + * 7 high 512MB 512MB + * 6 256MB 256MB + * 5 128MB 128MB + * 4 64MB 16GB + * 3 32MB 8GB + * 2 16MB 4GB + * 1 2GB 2GB + * 0 low 1GB 1GB + * + * Reorder Table to be linear by stripping the bottom + * 2 or 5 bits off and shifting them up to the top. + */ + +static unsigned long long +compute_ranksize(unsigned int mem_type, unsigned char row_dens) +{ + unsigned long long bsize; + + /* Bottom 2 bits up to the top. */ + bsize = ((row_dens >> 2) | ((row_dens & 3) << 6)); + bsize <<= 24ULL; + debug("DDR: DDR I rank density = 0x%16llx\n", bsize); + + return bsize; +} + +/* + * Convert a two-nibble BCD value into a cycle time. + * While the spec calls for nano-seconds, picos are returned. + * + * This implements the tables for bytes 9, 23 and 25 for both + * DDR I and II. No allowance for distinguishing the invalid + * fields absent for DDR I yet present in DDR II is made. + * (That is, cycle times of .25, .33, .66 and .75 ns are + * allowed for both DDR II and I.) + */ +static unsigned int +convert_bcd_tenths_to_cycle_time_ps(unsigned int spd_val) +{ + /* Table look up the lower nibble, allow DDR I & II. */ + unsigned int tenths_ps[16] = { + 0, + 100, + 200, + 300, + 400, + 500, + 600, + 700, + 800, + 900, + 250, /* This and the next 3 entries valid ... */ + 330, /* ... only for tCK calculations. */ + 660, + 750, + 0, /* undefined */ + 0 /* undefined */ + }; + + unsigned int whole_ns = (spd_val & 0xF0) >> 4; + unsigned int tenth_ns = spd_val & 0x0F; + unsigned int ps = whole_ns * 1000 + tenths_ps[tenth_ns]; + + return ps; +} + +static unsigned int +convert_bcd_hundredths_to_cycle_time_ps(unsigned int spd_val) +{ + unsigned int tenth_ns = (spd_val & 0xF0) >> 4; + unsigned int hundredth_ns = spd_val & 0x0F; + unsigned int ps = tenth_ns * 100 + hundredth_ns * 10; + + return ps; +} + +static unsigned int byte40_table_ps[8] = { + 0, + 250, + 330, + 500, + 660, + 750, + 0, /* supposed to be RFC, but not sure what that means */ + 0 /* Undefined */ +}; + +static unsigned int +compute_trfc_ps_from_spd(unsigned char trctrfc_ext, unsigned char trfc) +{ + return ((trctrfc_ext & 0x1) * 256 + trfc) * 1000 + + byte40_table_ps[(trctrfc_ext >> 1) & 0x7]; +} + +static unsigned int +compute_trc_ps_from_spd(unsigned char trctrfc_ext, unsigned char trc) +{ + return trc * 1000 + byte40_table_ps[(trctrfc_ext >> 4) & 0x7]; +} + +/* + * tCKmax from DDR I SPD Byte 43 + * + * Bits 7:2 == whole ns + * Bits 1:0 == quarter ns + * 00 == 0.00 ns + * 01 == 0.25 ns + * 10 == 0.50 ns + * 11 == 0.75 ns + * + * Returns picoseconds. + */ +static unsigned int +compute_tckmax_from_spd_ps(unsigned int byte43) +{ + return (byte43 >> 2) * 1000 + (byte43 & 0x3) * 250; +} + +/* + * Determine Refresh Rate. Ignore self refresh bit on DDR I. + * Table from SPD Spec, Byte 12, converted to picoseconds and + * filled in with "default" normal values. + */ +static unsigned int +determine_refresh_rate_ps(const unsigned int spd_refresh) +{ + unsigned int refresh_time_ps[8] = { + 15625000, /* 0 Normal 1.00x */ + 3900000, /* 1 Reduced .25x */ + 7800000, /* 2 Extended .50x */ + 31300000, /* 3 Extended 2.00x */ + 62500000, /* 4 Extended 4.00x */ + 125000000, /* 5 Extended 8.00x */ + 15625000, /* 6 Normal 1.00x filler */ + 15625000, /* 7 Normal 1.00x filler */ + }; + + return refresh_time_ps[spd_refresh & 0x7]; +} + +/* + * The purpose of this function is to compute a suitable + * CAS latency given the DRAM clock period. The SPD only + * defines at most 3 CAS latencies. Typically the slower in + * frequency the DIMM runs at, the shorter its CAS latency can be. + * If the DIMM is operating at a sufficiently low frequency, + * it may be able to run at a CAS latency shorter than the + * shortest SPD-defined CAS latency. + * + * If a CAS latency is not found, 0 is returned. + * + * Do this by finding in the standard speed bin table the longest + * tCKmin that doesn't exceed the value of mclk_ps (tCK). + * + * An assumption made is that the SDRAM device allows the + * CL to be programmed for a value that is lower than those + * advertised by the SPD. This is not always the case, + * as those modes not defined in the SPD are optional. + * + * CAS latency de-rating based upon values JEDEC Standard No. 79-E + * Table 11. + * + * ordinal 2, ddr1_speed_bins[1] contains tCK for CL=2 + */ + /* CL2.0 CL2.5 CL3.0 */ +unsigned short ddr1_speed_bins[] = {0, 7500, 6000, 5000 }; + +static unsigned int +compute_derated_DDR1_CAS_latency(unsigned int mclk_ps) +{ + const unsigned int num_speed_bins = ARRAY_SIZE(ddr1_speed_bins); + unsigned int lowest_tCKmin_found = 0; + unsigned int lowest_tCKmin_CL = 0; + unsigned int i; + + debug("mclk_ps = %u\n", mclk_ps); + + for (i = 0; i < num_speed_bins; i++) { + unsigned int x = ddr1_speed_bins[i]; + debug("i=%u, x = %u, lowest_tCKmin_found = %u\n", + i, x, lowest_tCKmin_found); + if (x && lowest_tCKmin_found <= x && x <= mclk_ps) { + lowest_tCKmin_found = x; + lowest_tCKmin_CL = i + 1; + } + } + + debug("lowest_tCKmin_CL = %u\n", lowest_tCKmin_CL); + + return lowest_tCKmin_CL; +} + +/* + * ddr1_compute_dimm_parameters for DDR1 SPD + * + * Compute DIMM parameters based upon the SPD information in spd. + * Writes the results to the struct dimm_params structure pointed by pdimm. + * + * FIXME: use #define for the retvals + */ +unsigned int ddr1_compute_dimm_parameters(unsigned int mclk_ps, + const struct ddr1_spd_eeprom *spd, + struct dimm_params *pdimm) +{ + int ret; + + ret = ddr1_spd_check(spd); + if (ret) { + printf("DIMM: failed checksum\n"); + return 2; + } + + /* + * The part name in ASCII in the SPD EEPROM is not null terminated. + * Guarantee null termination here by presetting all bytes to 0 + * and copying the part name in ASCII from the SPD onto it + */ + memset(pdimm->mpart, 0, sizeof(pdimm->mpart)); + memcpy(pdimm->mpart, spd->mpart, sizeof(pdimm->mpart) - 1); + + /* DIMM organization parameters */ + pdimm->n_ranks = spd->nrows; + pdimm->rank_density = compute_ranksize(spd->mem_type, spd->bank_dens); + pdimm->capacity = pdimm->n_ranks * pdimm->rank_density; + pdimm->data_width = spd->dataw_lsb; + pdimm->primary_sdram_width = spd->primw; + pdimm->ec_sdram_width = spd->ecw; + + /* + * FIXME: Need to determine registered_dimm status. + * 1 == register buffered + * 0 == unbuffered + */ + pdimm->registered_dimm = 0; /* unbuffered */ + + /* SDRAM device parameters */ + pdimm->n_row_addr = spd->nrow_addr; + pdimm->n_col_addr = spd->ncol_addr; + pdimm->n_banks_per_sdram_device = spd->nbanks; + pdimm->edc_config = spd->config; + pdimm->burst_lengths_bitmask = spd->burstl; + + /* + * Calculate the Maximum Data Rate based on the Minimum Cycle time. + * The SPD clk_cycle field (tCKmin) is measured in tenths of + * nanoseconds and represented as BCD. + */ + pdimm->tckmin_x_ps + = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle); + pdimm->tckmin_x_minus_1_ps + = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle2); + pdimm->tckmin_x_minus_2_ps + = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle3); + + pdimm->tckmax_ps = compute_tckmax_from_spd_ps(spd->tckmax); + + /* + * Compute CAS latencies defined by SPD + * The SPD caslat_x should have at least 1 and at most 3 bits set. + * + * If cas_lat after masking is 0, the __ilog2 function returns + * 255 into the variable. This behavior is abused once. + */ + pdimm->caslat_x = ilog2(spd->cas_lat); + pdimm->caslat_x_minus_1 = ilog2(spd->cas_lat + & ~(1 << pdimm->caslat_x)); + pdimm->caslat_x_minus_2 = ilog2(spd->cas_lat + & ~(1 << pdimm->caslat_x) + & ~(1 << pdimm->caslat_x_minus_1)); + + /* Compute CAS latencies below that defined by SPD */ + pdimm->caslat_lowest_derated = compute_derated_DDR1_CAS_latency( + mclk_ps); + + /* Compute timing parameters */ + pdimm->trcd_ps = spd->trcd * 250; + pdimm->trp_ps = spd->trp * 250; + pdimm->tras_ps = spd->tras * 1000; + + pdimm->twr_ps = mclk_ps * 3; + pdimm->twtr_ps = mclk_ps * 1; + pdimm->trfc_ps = compute_trfc_ps_from_spd(0, spd->trfc); + + pdimm->trrd_ps = spd->trrd * 250; + pdimm->trc_ps = compute_trc_ps_from_spd(0, spd->trc); + + pdimm->refresh_rate_ps = determine_refresh_rate_ps(spd->refresh); + + pdimm->tis_ps = convert_bcd_hundredths_to_cycle_time_ps(spd->ca_setup); + pdimm->tih_ps = convert_bcd_hundredths_to_cycle_time_ps(spd->ca_hold); + pdimm->tds_ps + = convert_bcd_hundredths_to_cycle_time_ps(spd->data_setup); + pdimm->tdh_ps + = convert_bcd_hundredths_to_cycle_time_ps(spd->data_hold); + + pdimm->trtp_ps = mclk_ps * 2; /* By the book. */ + pdimm->tdqsq_max_ps = spd->tdqsq * 10; + pdimm->tqhs_ps = spd->tqhs * 10; + + return 0; +} diff --git a/common/ddr2_dimm_params.c b/common/ddr2_dimm_params.c new file mode 100644 index 0000000000..2cec662ecb --- /dev/null +++ b/common/ddr2_dimm_params.c @@ -0,0 +1,319 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2008 Freescale Semiconductor, Inc. + */ + +#include <common.h> +#include <linux/log2.h> +#include <ddr_dimms.h> + +/* + * Calculate the Density of each Physical Rank. + * Returned size is in bytes. + * + * Study these table from Byte 31 of JEDEC SPD Spec. + * + * DDR I DDR II + * Bit Size Size + * --- ----- ------ + * 7 high 512MB 512MB + * 6 256MB 256MB + * 5 128MB 128MB + * 4 64MB 16GB + * 3 32MB 8GB + * 2 16MB 4GB + * 1 2GB 2GB + * 0 low 1GB 1GB + * + * Reorder Table to be linear by stripping the bottom + * 2 or 5 bits off and shifting them up to the top. + * + */ +static unsigned long long +compute_ranksize(unsigned int mem_type, unsigned char row_dens) +{ + unsigned long long bsize; + + /* Bottom 5 bits up to the top. */ + bsize = ((row_dens >> 5) | ((row_dens & 31) << 3)); + bsize <<= 27ULL; + debug("DDR: DDR II rank density = 0x%16llx\n", bsize); + + return bsize; +} + +/* + * Convert a two-nibble BCD value into a cycle time. + * While the spec calls for nano-seconds, picos are returned. + * + * This implements the tables for bytes 9, 23 and 25 for both + * DDR I and II. No allowance for distinguishing the invalid + * fields absent for DDR I yet present in DDR II is made. + * (That is, cycle times of .25, .33, .66 and .75 ns are + * allowed for both DDR II and I.) + */ +static unsigned int +convert_bcd_tenths_to_cycle_time_ps(unsigned int spd_val) +{ + /* Table look up the lower nibble, allow DDR I & II. */ + unsigned int tenths_ps[16] = { + 0, + 100, + 200, + 300, + 400, + 500, + 600, + 700, + 800, + 900, + 250, /* This and the next 3 entries valid ... */ + 330, /* ... only for tCK calculations. */ + 660, + 750, + 0, /* undefined */ + 0 /* undefined */ + }; + + unsigned int whole_ns = (spd_val & 0xF0) >> 4; + unsigned int tenth_ns = spd_val & 0x0F; + unsigned int ps = whole_ns * 1000 + tenths_ps[tenth_ns]; + + return ps; +} + +static unsigned int +convert_bcd_hundredths_to_cycle_time_ps(unsigned int spd_val) +{ + unsigned int tenth_ns = (spd_val & 0xF0) >> 4; + unsigned int hundredth_ns = spd_val & 0x0F; + unsigned int ps = tenth_ns * 100 + hundredth_ns * 10; + + return ps; +} + +static unsigned int byte40_table_ps[8] = { + 0, + 250, + 330, + 500, + 660, + 750, + 0, /* supposed to be RFC, but not sure what that means */ + 0 /* Undefined */ +}; + +static unsigned int +compute_trfc_ps_from_spd(unsigned char trctrfc_ext, unsigned char trfc) +{ + return (((trctrfc_ext & 0x1) * 256) + trfc) * 1000 + + byte40_table_ps[(trctrfc_ext >> 1) & 0x7]; +} + +static unsigned int +compute_trc_ps_from_spd(unsigned char trctrfc_ext, unsigned char trc) +{ + return trc * 1000 + byte40_table_ps[(trctrfc_ext >> 4) & 0x7]; +} + +/* + * Determine Refresh Rate. Ignore self refresh bit on DDR I. + * Table from SPD Spec, Byte 12, converted to picoseconds and + * filled in with "default" normal values. + */ +static unsigned int +determine_refresh_rate_ps(const unsigned int spd_refresh) +{ + unsigned int refresh_time_ps[8] = { + 15625000, /* 0 Normal 1.00x */ + 3900000, /* 1 Reduced .25x */ + 7800000, /* 2 Extended .50x */ + 31300000, /* 3 Extended 2.00x */ + 62500000, /* 4 Extended 4.00x */ + 125000000, /* 5 Extended 8.00x */ + 15625000, /* 6 Normal 1.00x filler */ + 15625000, /* 7 Normal 1.00x filler */ + }; + + return refresh_time_ps[spd_refresh & 0x7]; +} + +/* + * The purpose of this function is to compute a suitable + * CAS latency given the DRAM clock period. The SPD only + * defines at most 3 CAS latencies. Typically the slower in + * frequency the DIMM runs at, the shorter its CAS latency can. + * be. If the DIMM is operating at a sufficiently low frequency, + * it may be able to run at a CAS latency shorter than the + * shortest SPD-defined CAS latency. + * + * If a CAS latency is not found, 0 is returned. + * + * Do this by finding in the standard speed bin table the longest + * tCKmin that doesn't exceed the value of mclk_ps (tCK). + * + * An assumption made is that the SDRAM device allows the + * CL to be programmed for a value that is lower than those + * advertised by the SPD. This is not always the case, + * as those modes not defined in the SPD are optional. + * + * CAS latency de-rating based upon values JEDEC Standard No. 79-2C + * Table 40, "DDR2 SDRAM stanadard speed bins and tCK, tRCD, tRP, tRAS, + * and tRC for corresponding bin" + * + * ordinal 2, ddr2_speed_bins[1] contains tCK for CL=3 + * Not certain if any good value exists for CL=2 + */ + /* CL2 CL3 CL4 CL5 CL6 CL7*/ +static unsigned short ddr2_speed_bins[] = { 0, 5000, 3750, 3000, 2500, 1875 }; + +static unsigned int +compute_derated_DDR2_CAS_latency(unsigned int mclk_ps) +{ + const unsigned int num_speed_bins = ARRAY_SIZE(ddr2_speed_bins); + unsigned int lowest_tCKmin_found = 0; + unsigned int lowest_tCKmin_CL = 0; + unsigned int i; + + debug("mclk_ps = %u\n", mclk_ps); + + for (i = 0; i < num_speed_bins; i++) { + unsigned int x = ddr2_speed_bins[i]; + debug("i=%u, x = %u, lowest_tCKmin_found = %u\n", + i, x, lowest_tCKmin_found); + if (x && x <= mclk_ps && x >= lowest_tCKmin_found ) { + lowest_tCKmin_found = x; + lowest_tCKmin_CL = i + 2; + } + } + + debug("lowest_tCKmin_CL = %u\n", lowest_tCKmin_CL); + + return lowest_tCKmin_CL; +} + +/* + * ddr2_compute_dimm_parameters for DDR2 SPD + * + * Compute DIMM parameters based upon the SPD information in spd. + * Writes the results to the struct dimm_params structure pointed by pdimm. + * + * FIXME: use #define for the retvals + */ +unsigned int ddr2_compute_dimm_parameters(unsigned int mclk_ps, + const struct ddr2_spd_eeprom *spd, + struct dimm_params *pdimm) +{ + int ret; + + ret = ddr2_spd_check(spd); + if (ret) { + printf("DIMM: failed checksum\n"); + return 2; + } + + /* + * The part name in ASCII in the SPD EEPROM is not null terminated. + * Guarantee null termination here by presetting all bytes to 0 + * and copying the part name in ASCII from the SPD onto it + */ + memset(pdimm->mpart, 0, sizeof(pdimm->mpart)); + memcpy(pdimm->mpart, spd->mpart, sizeof(pdimm->mpart) - 1); + + /* DIMM organization parameters */ + pdimm->n_ranks = (spd->mod_ranks & 0x7) + 1; + pdimm->rank_density = compute_ranksize(spd->mem_type, spd->rank_dens); + pdimm->capacity = pdimm->n_ranks * pdimm->rank_density; + pdimm->data_width = spd->dataw; + pdimm->primary_sdram_width = spd->primw; + pdimm->ec_sdram_width = spd->ecw; + + /* These are all the types defined by the JEDEC DDR2 SPD 1.3 spec */ + switch (spd->dimm_type) { + case DDR2_SPD_DIMMTYPE_RDIMM: + case DDR2_SPD_DIMMTYPE_72B_SO_RDIMM: + case DDR2_SPD_DIMMTYPE_MINI_RDIMM: + /* Registered/buffered DIMMs */ + pdimm->registered_dimm = 1; + break; + + case DDR2_SPD_DIMMTYPE_UDIMM: + case DDR2_SPD_DIMMTYPE_SO_DIMM: + case DDR2_SPD_DIMMTYPE_MICRO_DIMM: + case DDR2_SPD_DIMMTYPE_MINI_UDIMM: + /* Unbuffered DIMMs */ + pdimm->registered_dimm = 0; + break; + + case DDR2_SPD_DIMMTYPE_72B_SO_CDIMM: + default: + printf("unknown dimm_type 0x%02X\n", spd->dimm_type); + return 1; + } + + /* SDRAM device parameters */ + pdimm->n_row_addr = spd->nrow_addr; + pdimm->n_col_addr = spd->ncol_addr; + pdimm->n_banks_per_sdram_device = spd->nbanks; + pdimm->edc_config = spd->config; + pdimm->burst_lengths_bitmask = spd->burstl; + + /* + * Calculate the Maximum Data Rate based on the Minimum Cycle time. + * The SPD clk_cycle field (tCKmin) is measured in tenths of + * nanoseconds and represented as BCD. + */ + pdimm->tckmin_x_ps + = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle); + pdimm->tckmin_x_minus_1_ps + = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle2); + pdimm->tckmin_x_minus_2_ps + = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle3); + + pdimm->tckmax_ps = convert_bcd_tenths_to_cycle_time_ps(spd->tckmax); + + /* + * Compute CAS latencies defined by SPD + * The SPD caslat_x should have at least 1 and at most 3 bits set. + * + * If cas_lat after masking is 0, the __ilog2 function returns + * 255 into the variable. This behavior is abused once. + */ + pdimm->caslat_x = ilog2(spd->cas_lat); + pdimm->caslat_x_minus_1 = ilog2(spd->cas_lat + & ~(1 << pdimm->caslat_x)); + pdimm->caslat_x_minus_2 = ilog2(spd->cas_lat + & ~(1 << pdimm->caslat_x) + & ~(1 << pdimm->caslat_x_minus_1)); + + /* Compute CAS latencies below that defined by SPD */ + pdimm->caslat_lowest_derated = compute_derated_DDR2_CAS_latency( + mclk_ps); + + /* Compute timing parameters */ + pdimm->trcd_ps = spd->trcd * 250; + pdimm->trp_ps = spd->trp * 250; + pdimm->tras_ps = spd->tras * 1000; + + pdimm->twr_ps = spd->twr * 250; + pdimm->twtr_ps = spd->twtr * 250; + pdimm->trfc_ps = compute_trfc_ps_from_spd(spd->trctrfc_ext, spd->trfc); + + pdimm->trrd_ps = spd->trrd * 250; + pdimm->trc_ps = compute_trc_ps_from_spd(spd->trctrfc_ext, spd->trc); + + pdimm->refresh_rate_ps = determine_refresh_rate_ps(spd->refresh); + + pdimm->tis_ps = convert_bcd_hundredths_to_cycle_time_ps(spd->ca_setup); + pdimm->tih_ps = convert_bcd_hundredths_to_cycle_time_ps(spd->ca_hold); + pdimm->tds_ps + = convert_bcd_hundredths_to_cycle_time_ps(spd->data_setup); + pdimm->tdh_ps + = convert_bcd_hundredths_to_cycle_time_ps(spd->data_hold); + + pdimm->trtp_ps = spd->trtp * 250; + pdimm->tdqsq_max_ps = spd->tdqsq * 10; + pdimm->tqhs_ps = spd->tqhs * 10; + + return 0; +} diff --git a/common/ddr3_dimm_params.c b/common/ddr3_dimm_params.c new file mode 100644 index 0000000000..0526f0b435 --- /dev/null +++ b/common/ddr3_dimm_params.c @@ -0,0 +1,324 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2008-2012 Freescale Semiconductor, Inc. + * Dave Liu <daveliu@freescale.com> + * + * calculate the organization and timing parameter + * from ddr3 spd, please refer to the spec + * JEDEC standard No.21-C 4_01_02_11R18.pdf + */ + +#include <common.h> +#include <ddr_dimms.h> + +/* + * Calculate the Density of each Physical Rank. + * Returned size is in bytes. + * + * each rank size = + * sdram capacity(bit) / 8 * primary bus width / sdram width + * + * where: sdram capacity = spd byte4[3:0] + * primary bus width = spd byte8[2:0] + * sdram width = spd byte7[2:0] + * + * SPD byte4 - sdram density and banks + * bit[3:0] size(bit) size(byte) + * 0000 256Mb 32MB + * 0001 512Mb 64MB + * 0010 1Gb 128MB + * 0011 2Gb 256MB + * 0100 4Gb 512MB + * 0101 8Gb 1GB + * 0110 16Gb 2GB + * + * SPD byte8 - module memory bus width + * bit[2:0] primary bus width + * 000 8bits + * 001 16bits + * 010 32bits + * 011 64bits + * + * SPD byte7 - module organiztion + * bit[2:0] sdram device width + * 000 4bits + * 001 8bits + * 010 16bits + * 011 32bits + * + */ +static unsigned long long +compute_ranksize(const struct ddr3_spd_eeprom *spd) +{ + unsigned long long bsize; + + int nbit_sdram_cap_bsize = 0; + int nbit_primary_bus_width = 0; + int nbit_sdram_width = 0; + + if ((spd->density_banks & 0xf) < 7) + nbit_sdram_cap_bsize = (spd->density_banks & 0xf) + 28; + if ((spd->bus_width & 0x7) < 4) + nbit_primary_bus_width = (spd->bus_width & 0x7) + 3; + if ((spd->organization & 0x7) < 4) + nbit_sdram_width = (spd->organization & 0x7) + 2; + + bsize = 1ULL << (nbit_sdram_cap_bsize - 3 + + nbit_primary_bus_width - nbit_sdram_width); + + debug("DDR: DDR III rank density = 0x%16llx\n", bsize); + + return bsize; +} + +/* + * ddr3_compute_dimm_parameters for DDR3 SPD + * + * Compute DIMM parameters based upon the SPD information in spd. + * Writes the results to the struct dimm_params structure pointed by pdimm. + * + */ +unsigned int ddr3_compute_dimm_parameters(unsigned int mclk_ps, + const struct ddr3_spd_eeprom *spd, + struct dimm_params *pdimm) +{ + int ret; + unsigned int mtb_ps; + int ftb_10th_ps; + int i; + + ret = ddr3_spd_check(spd); + if (ret) { + printf("DIMM: failed checksum\n"); + return 2; + } + + /* + * The part name in ASCII in the SPD EEPROM is not null terminated. + * Guarantee null termination here by presetting all bytes to 0 + * and copying the part name in ASCII from the SPD onto it + */ + memset(pdimm->mpart, 0, sizeof(pdimm->mpart)); + if ((spd->info_size_crc & 0xF) > 1) + memcpy(pdimm->mpart, spd->mpart, sizeof(pdimm->mpart) - 1); + + /* DIMM organization parameters */ + pdimm->n_ranks = ((spd->organization >> 3) & 0x7) + 1; + pdimm->rank_density = compute_ranksize(spd); + pdimm->capacity = pdimm->n_ranks * pdimm->rank_density; + pdimm->primary_sdram_width = 1 << (3 + (spd->bus_width & 0x7)); + if ((spd->bus_width >> 3) & 0x3) + pdimm->ec_sdram_width = 8; + else + pdimm->ec_sdram_width = 0; + pdimm->data_width = pdimm->primary_sdram_width + + pdimm->ec_sdram_width; + pdimm->device_width = 1 << ((spd->organization & 0x7) + 2); + + /* These are the types defined by the JEDEC DDR3 SPD spec */ + pdimm->mirrored_dimm = 0; + pdimm->registered_dimm = 0; + switch (spd->module_type & DDR3_SPD_MODULETYPE_MASK) { + case DDR3_SPD_MODULETYPE_RDIMM: + case DDR3_SPD_MODULETYPE_MINI_RDIMM: + case DDR3_SPD_MODULETYPE_72B_SO_RDIMM: + /* Registered/buffered DIMMs */ + pdimm->registered_dimm = 1; + for (i = 0; i < 16; i += 2) { + u8 rcw = spd->mod_section.registered.rcw[i/2]; + pdimm->rcw[i] = (rcw >> 0) & 0x0F; + pdimm->rcw[i+1] = (rcw >> 4) & 0x0F; + } + break; + + case DDR3_SPD_MODULETYPE_UDIMM: + case DDR3_SPD_MODULETYPE_SO_DIMM: + case DDR3_SPD_MODULETYPE_MICRO_DIMM: + case DDR3_SPD_MODULETYPE_MINI_UDIMM: + case DDR3_SPD_MODULETYPE_MINI_CDIMM: + case DDR3_SPD_MODULETYPE_72B_SO_UDIMM: + case DDR3_SPD_MODULETYPE_72B_SO_CDIMM: + case DDR3_SPD_MODULETYPE_LRDIMM: + case DDR3_SPD_MODULETYPE_16B_SO_DIMM: + case DDR3_SPD_MODULETYPE_32B_SO_DIMM: + /* Unbuffered DIMMs */ + if (spd->mod_section.unbuffered.addr_mapping & 0x1) + pdimm->mirrored_dimm = 1; + break; + + default: + printf("unknown module_type 0x%02X\n", spd->module_type); + return 1; + } + + /* SDRAM device parameters */ + pdimm->n_row_addr = ((spd->addressing >> 3) & 0x7) + 12; + pdimm->n_col_addr = (spd->addressing & 0x7) + 9; + pdimm->n_banks_per_sdram_device = 8 << ((spd->density_banks >> 4) & 0x7); + + /* + * The SPD spec has not the ECC bit, + * We consider the DIMM as ECC capability + * when the extension bus exist + */ + if (pdimm->ec_sdram_width) + pdimm->edc_config = 0x02; + else + pdimm->edc_config = 0x00; + + /* + * The SPD spec has not the burst length byte + * but DDR3 spec has nature BL8 and BC4, + * BL8 -bit3, BC4 -bit2 + */ + pdimm->burst_lengths_bitmask = 0x0c; + + /* MTB - medium timebase + * The unit in the SPD spec is ns, + * We convert it to ps. + * eg: MTB = 0.125ns (125ps) + */ + mtb_ps = (spd->mtb_dividend * 1000) /spd->mtb_divisor; + pdimm->mtb_ps = mtb_ps; + + /* + * FTB - fine timebase + * use 1/10th of ps as our unit to avoid floating point + * eg, 10 for 1ps, 25 for 2.5ps, 50 for 5ps + */ + ftb_10th_ps = + ((spd->ftb_div & 0xf0) >> 4) * 10 / (spd->ftb_div & 0x0f); + pdimm->ftb_10th_ps = ftb_10th_ps; + /* + * sdram minimum cycle time + * we assume the MTB is 0.125ns + * eg: + * tck_min=15 MTB (1.875ns) ->DDR3-1066 + * =12 MTB (1.5ns) ->DDR3-1333 + * =10 MTB (1.25ns) ->DDR3-1600 + */ + pdimm->tckmin_x_ps = spd->tck_min * mtb_ps + + (spd->fine_tck_min * ftb_10th_ps) / 10; + + /* + * CAS latency supported + * bit4 - CL4 + * bit5 - CL5 + * bit18 - CL18 + */ + pdimm->caslat_x = ((spd->caslat_msb << 8) | spd->caslat_lsb) << 4; + + /* + * min CAS latency time + * eg: taa_min = + * DDR3-800D 100 MTB (12.5ns) + * DDR3-1066F 105 MTB (13.125ns) + * DDR3-1333H 108 MTB (13.5ns) + * DDR3-1600H 90 MTB (11.25ns) + */ + pdimm->taa_ps = spd->taa_min * mtb_ps + + (spd->fine_taa_min * ftb_10th_ps) / 10; + + /* + * min write recovery time + * eg: + * twr_min = 120 MTB (15ns) -> all speed grades. + */ + pdimm->twr_ps = spd->twr_min * mtb_ps; + + /* + * min RAS to CAS delay time + * eg: trcd_min = + * DDR3-800 100 MTB (12.5ns) + * DDR3-1066F 105 MTB (13.125ns) + * DDR3-1333H 108 MTB (13.5ns) + * DDR3-1600H 90 MTB (11.25) + */ + pdimm->trcd_ps = spd->trcd_min * mtb_ps + + (spd->fine_trcd_min * ftb_10th_ps) / 10; + + /* + * min row active to row active delay time + * eg: trrd_min = + * DDR3-800(1KB page) 80 MTB (10ns) + * DDR3-1333(1KB page) 48 MTB (6ns) + */ + pdimm->trrd_ps = spd->trrd_min * mtb_ps; + + /* + * min row precharge delay time + * eg: trp_min = + * DDR3-800D 100 MTB (12.5ns) + * DDR3-1066F 105 MTB (13.125ns) + * DDR3-1333H 108 MTB (13.5ns) + * DDR3-1600H 90 MTB (11.25ns) + */ + pdimm->trp_ps = spd->trp_min * mtb_ps + + (spd->fine_trp_min * ftb_10th_ps) / 10; + + /* min active to precharge delay time + * eg: tRAS_min = + * DDR3-800D 300 MTB (37.5ns) + * DDR3-1066F 300 MTB (37.5ns) + * DDR3-1333H 288 MTB (36ns) + * DDR3-1600H 280 MTB (35ns) + */ + pdimm->tras_ps = (((spd->tras_trc_ext & 0xf) << 8) | spd->tras_min_lsb) + * mtb_ps; + /* + * min active to actice/refresh delay time + * eg: tRC_min = + * DDR3-800D 400 MTB (50ns) + * DDR3-1066F 405 MTB (50.625ns) + * DDR3-1333H 396 MTB (49.5ns) + * DDR3-1600H 370 MTB (46.25ns) + */ + pdimm->trc_ps = (((spd->tras_trc_ext & 0xf0) << 4) | spd->trc_min_lsb) + * mtb_ps + (spd->fine_trc_min * ftb_10th_ps) / 10; + /* + * min refresh recovery delay time + * eg: tRFC_min = + * 512Mb 720 MTB (90ns) + * 1Gb 880 MTB (110ns) + * 2Gb 1280 MTB (160ns) + */ + pdimm->trfc_ps = ((spd->trfc_min_msb << 8) | spd->trfc_min_lsb) + * mtb_ps; + /* + * min internal write to read command delay time + * eg: twtr_min = 40 MTB (7.5ns) - all speed bins. + * tWRT is at least 4 mclk independent of operating freq. + */ + pdimm->twtr_ps = spd->twtr_min * mtb_ps; + + /* + * min internal read to precharge command delay time + * eg: trtp_min = 40 MTB (7.5ns) - all speed bins. + * tRTP is at least 4 mclk independent of operating freq. + */ + pdimm->trtp_ps = spd->trtp_min * mtb_ps; + + /* + * Average periodic refresh interval + * tREFI = 7.8 us at normal temperature range + * = 3.9 us at ext temperature range + */ + pdimm->refresh_rate_ps = 7800000; + if ((spd->therm_ref_opt & 0x1) && !(spd->therm_ref_opt & 0x2)) { + pdimm->refresh_rate_ps = 3900000; + pdimm->extended_op_srt = 1; + } + + /* + * min four active window delay time + * eg: tfaw_min = + * DDR3-800(1KB page) 320 MTB (40ns) + * DDR3-1066(1KB page) 300 MTB (37.5ns) + * DDR3-1333(1KB page) 240 MTB (30ns) + * DDR3-1600(1KB page) 240 MTB (30ns) + */ + pdimm->tfaw_ps = (((spd->tfaw_msb & 0xf) << 8) | spd->tfaw_min) + * mtb_ps; + + return 0; +} diff --git a/common/ddr4_dimm_params.c b/common/ddr4_dimm_params.c new file mode 100644 index 0000000000..d711863bbb --- /dev/null +++ b/common/ddr4_dimm_params.c @@ -0,0 +1,351 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2014-2016 Freescale Semiconductor, Inc. + * Copyright 2017-2018 NXP Semiconductor + * + * calculate the organization and timing parameter + * from ddr3 spd, please refer to the spec + * JEDEC standard No.21-C 4_01_02_12R23A.pdf + * + * + */ + +#include <common.h> +#include <ddr_dimms.h> + +/* + * Calculate the Density of each Physical Rank. + * Returned size is in bytes. + * + * Total DIMM size = + * sdram capacity(bit) / 8 * primary bus width / sdram width + * * Logical Ranks per DIMM + * + * where: sdram capacity = spd byte4[3:0] + * primary bus width = spd byte13[2:0] + * sdram width = spd byte12[2:0] + * Logical Ranks per DIMM = spd byte12[5:3] for SDP, DDP, QDP + * spd byte12{5:3] * spd byte6[6:4] for 3DS + * + * To simplify each rank size = total DIMM size / Number of Package Ranks + * where Number of Package Ranks = spd byte12[5:3] + * + * SPD byte4 - sdram density and banks + * bit[3:0] size(bit) size(byte) + * 0000 256Mb 32MB + * 0001 512Mb 64MB + * 0010 1Gb 128MB + * 0011 2Gb 256MB + * 0100 4Gb 512MB + * 0101 8Gb 1GB + * 0110 16Gb 2GB + * 0111 32Gb 4GB + * + * SPD byte13 - module memory bus width + * bit[2:0] primary bus width + * 000 8bits + * 001 16bits + * 010 32bits + * 011 64bits + * + * SPD byte12 - module organization + * bit[2:0] sdram device width + * 000 4bits + * 001 8bits + * 010 16bits + * 011 32bits + * + * SPD byte12 - module organization + * bit[5:3] number of package ranks per DIMM + * 000 1 + * 001 2 + * 010 3 + * 011 4 + * + * SPD byte6 - SDRAM package type + * bit[6:4] Die count + * 000 1 + * 001 2 + * 010 3 + * 011 4 + * 100 5 + * 101 6 + * 110 7 + * 111 8 + * + * SPD byte6 - SRAM package type + * bit[1:0] Signal loading + * 00 Not specified + * 01 Multi load stack + * 10 Sigle load stack (3DS) + * 11 Reserved + */ +static unsigned long long +compute_ranksize(const struct ddr4_spd_eeprom *spd) +{ + unsigned long long bsize; + + int nbit_sdram_cap_bsize = 0; + int nbit_primary_bus_width = 0; + int nbit_sdram_width = 0; + int die_count = 0; + bool package_3ds; + + if ((spd->density_banks & 0xf) <= 7) + nbit_sdram_cap_bsize = (spd->density_banks & 0xf) + 28; + if ((spd->bus_width & 0x7) < 4) + nbit_primary_bus_width = (spd->bus_width & 0x7) + 3; + if ((spd->organization & 0x7) < 4) + nbit_sdram_width = (spd->organization & 0x7) + 2; + package_3ds = (spd->package_type & 0x3) == 0x2; + if ((spd->package_type & 0x80) && !package_3ds) { /* other than 3DS */ + printf("Warning: not supported SDRAM package type\n"); + return 0; + } + if (package_3ds) + die_count = (spd->package_type >> 4) & 0x7; + + bsize = 1ULL << (nbit_sdram_cap_bsize - 3 + + nbit_primary_bus_width - nbit_sdram_width + + die_count); + + debug("DDR: DDR rank density = 0x%16llx\n", bsize); + + return bsize; +} + +#define spd_to_ps(mtb, ftb) \ + (mtb * pdimm->mtb_ps + (ftb * pdimm->ftb_10th_ps) / 10) +/* + * ddr4_compute_dimm_parameters for DDR4 SPD + * + * Compute DIMM parameters based upon the SPD information in spd. + * Writes the results to the struct dimm_params structure pointed by pdimm. + * + */ +unsigned int ddr4_compute_dimm_parameters(unsigned int mclk_ps, + const struct ddr4_spd_eeprom *spd, + struct dimm_params *pdimm) +{ + int ret; + int i; + const u8 udimm_rc_e_dq[18] = { + 0x0c, 0x2c, 0x15, 0x35, 0x15, 0x35, 0x0b, 0x2c, 0x15, + 0x35, 0x0b, 0x35, 0x0b, 0x2c, 0x0b, 0x35, 0x15, 0x36 + }; + int spd_error = 0; + u8 *ptr; + u8 val; + + ret = ddr4_spd_check(spd); + if (ret) { + printf("DIMM: failed checksum\n"); + return 2; + } + + /* + * The part name in ASCII in the SPD EEPROM is not null terminated. + * Guarantee null termination here by presetting all bytes to 0 + * and copying the part name in ASCII from the SPD onto it + */ + memset(pdimm->mpart, 0, sizeof(pdimm->mpart)); + if ((spd->info_size_crc & 0xF) > 2) + memcpy(pdimm->mpart, spd->mpart, sizeof(pdimm->mpart) - 1); + + /* DIMM organization parameters */ + pdimm->n_ranks = ((spd->organization >> 3) & 0x7) + 1; + pdimm->rank_density = compute_ranksize(spd); + pdimm->capacity = pdimm->n_ranks * pdimm->rank_density; + pdimm->die_density = spd->density_banks & 0xf; + pdimm->primary_sdram_width = 1 << (3 + (spd->bus_width & 0x7)); + if ((spd->bus_width >> 3) & 0x3) + pdimm->ec_sdram_width = 8; + else + pdimm->ec_sdram_width = 0; + pdimm->data_width = pdimm->primary_sdram_width + + pdimm->ec_sdram_width; + pdimm->device_width = 1 << ((spd->organization & 0x7) + 2); + pdimm->package_3ds = (spd->package_type & 0x3) == 0x2 ? + (spd->package_type >> 4) & 0x7 : 0; + + /* These are the types defined by the JEDEC SPD spec */ + pdimm->mirrored_dimm = 0; + pdimm->registered_dimm = 0; + switch (spd->module_type & DDR4_SPD_MODULETYPE_MASK) { + case DDR4_SPD_MODULETYPE_RDIMM: + /* Registered/buffered DIMMs */ + pdimm->registered_dimm = 1; + if (spd->mod_section.registered.reg_map & 0x1) + pdimm->mirrored_dimm = 1; + val = spd->mod_section.registered.ca_stren; + pdimm->rcw[3] = val >> 4; + pdimm->rcw[4] = ((val & 0x3) << 2) | ((val & 0xc) >> 2); + val = spd->mod_section.registered.clk_stren; + pdimm->rcw[5] = ((val & 0x3) << 2) | ((val & 0xc) >> 2); + /* Not all in SPD. For convience only. Boards may overwrite. */ + pdimm->rcw[6] = 0xf; + /* + * A17 only used for 16Gb and above devices. + * C[2:0] only used for 3DS. + */ + pdimm->rcw[8] = pdimm->die_density >= 0x6 ? 0x0 : 0x8 | + (pdimm->package_3ds > 0x3 ? 0x0 : + (pdimm->package_3ds > 0x1 ? 0x1 : + (pdimm->package_3ds > 0 ? 0x2 : 0x3))); + if (pdimm->package_3ds || pdimm->n_ranks != 4) + pdimm->rcw[13] = 0xc; + else + pdimm->rcw[13] = 0xd; /* Fix encoded by board */ + + break; + + case DDR4_SPD_MODULETYPE_UDIMM: + case DDR4_SPD_MODULETYPE_SO_DIMM: + /* Unbuffered DIMMs */ + if (spd->mod_section.unbuffered.addr_mapping & 0x1) + pdimm->mirrored_dimm = 1; + if ((spd->mod_section.unbuffered.mod_height & 0xe0) == 0 && + (spd->mod_section.unbuffered.ref_raw_card == 0x04)) { + /* Fix SPD error found on DIMMs with raw card E0 */ + for (i = 0; i < 18; i++) { + if (spd->mapping[i] == udimm_rc_e_dq[i]) + continue; + spd_error = 1; + debug("SPD byte %d: 0x%x, should be 0x%x\n", + 60 + i, spd->mapping[i], + udimm_rc_e_dq[i]); + ptr = (u8 *)&spd->mapping[i]; + *ptr = udimm_rc_e_dq[i]; + } + if (spd_error) + printf("SPD DQ mapping error fixed\n"); + } + break; + + default: + printf("unknown module_type 0x%02X\n", spd->module_type); + return 1; + } + + /* SDRAM device parameters */ + pdimm->n_row_addr = ((spd->addressing >> 3) & 0x7) + 12; + pdimm->n_col_addr = (spd->addressing & 0x7) + 9; + pdimm->bank_addr_bits = (spd->density_banks >> 4) & 0x3; + pdimm->bank_group_bits = (spd->density_banks >> 6) & 0x3; + + /* + * The SPD spec has not the ECC bit, + * We consider the DIMM as ECC capability + * when the extension bus exist + */ + if (pdimm->ec_sdram_width) + pdimm->edc_config = 0x02; + else + pdimm->edc_config = 0x00; + + /* + * The SPD spec has not the burst length byte + * but DDR4 spec has nature BL8 and BC4, + * BL8 -bit3, BC4 -bit2 + */ + pdimm->burst_lengths_bitmask = 0x0c; + + /* MTB - medium timebase + * The MTB in the SPD spec is 125ps, + * + * FTB - fine timebase + * use 1/10th of ps as our unit to avoid floating point + * eg, 10 for 1ps, 25 for 2.5ps, 50 for 5ps + */ + if ((spd->timebases & 0xf) == 0x0) { + pdimm->mtb_ps = 125; + pdimm->ftb_10th_ps = 10; + + } else { + printf("Unknown Timebases\n"); + } + + /* sdram minimum cycle time */ + pdimm->tckmin_x_ps = spd_to_ps(spd->tck_min, spd->fine_tck_min); + + /* sdram max cycle time */ + pdimm->tckmax_ps = spd_to_ps(spd->tck_max, spd->fine_tck_max); + + /* + * CAS latency supported + * bit0 - CL7 + * bit4 - CL11 + * bit8 - CL15 + * bit12- CL19 + * bit16- CL23 + */ + pdimm->caslat_x = (spd->caslat_b1 << 7) | + (spd->caslat_b2 << 15) | + (spd->caslat_b3 << 23); + + BUG_ON(spd->caslat_b4 != 0); + + /* + * min CAS latency time + */ + pdimm->taa_ps = spd_to_ps(spd->taa_min, spd->fine_taa_min); + + /* + * min RAS to CAS delay time + */ + pdimm->trcd_ps = spd_to_ps(spd->trcd_min, spd->fine_trcd_min); + + /* + * Min Row Precharge Delay Time + */ + pdimm->trp_ps = spd_to_ps(spd->trp_min, spd->fine_trp_min); + + /* min active to precharge delay time */ + pdimm->tras_ps = (((spd->tras_trc_ext & 0xf) << 8) + + spd->tras_min_lsb) * pdimm->mtb_ps; + + /* min active to actice/refresh delay time */ + pdimm->trc_ps = spd_to_ps((((spd->tras_trc_ext & 0xf0) << 4) + + spd->trc_min_lsb), spd->fine_trc_min); + /* Min Refresh Recovery Delay Time */ + pdimm->trfc1_ps = ((spd->trfc1_min_msb << 8) | (spd->trfc1_min_lsb)) * + pdimm->mtb_ps; + pdimm->trfc2_ps = ((spd->trfc2_min_msb << 8) | (spd->trfc2_min_lsb)) * + pdimm->mtb_ps; + pdimm->trfc4_ps = ((spd->trfc4_min_msb << 8) | (spd->trfc4_min_lsb)) * + pdimm->mtb_ps; + /* min four active window delay time */ + pdimm->tfaw_ps = (((spd->tfaw_msb & 0xf) << 8) | spd->tfaw_min) * + pdimm->mtb_ps; + + /* min row active to row active delay time, different bank group */ + pdimm->trrds_ps = spd_to_ps(spd->trrds_min, spd->fine_trrds_min); + /* min row active to row active delay time, same bank group */ + pdimm->trrdl_ps = spd_to_ps(spd->trrdl_min, spd->fine_trrdl_min); + /* min CAS to CAS Delay Time (tCCD_Lmin), same bank group */ + pdimm->tccdl_ps = spd_to_ps(spd->tccdl_min, spd->fine_tccdl_min); + + if (pdimm->package_3ds) { + if (pdimm->die_density <= 0x4) { + pdimm->trfc_slr_ps = 260000; + } else if (pdimm->die_density <= 0x5) { + pdimm->trfc_slr_ps = 350000; + } else { + printf("WARN: Unsupported logical rank density 0x%x\n", + pdimm->die_density); + } + } + + /* + * Average periodic refresh interval + * tREFI = 7.8 us at normal temperature range + */ + pdimm->refresh_rate_ps = 7800000; + + for (i = 0; i < 18; i++) + pdimm->dq_mapping[i] = spd->mapping[i]; + + pdimm->dq_mapping_ors = ((spd->mapping[0] >> 6) & 0x3) == 0 ? 1 : 0; + + return 0; +} |