summaryrefslogtreecommitdiff
path: root/include/ddr_spd.h
diff options
context:
space:
mode:
authorRenaud Barbier <renaud.barbier@ge.com>2013-06-26 18:33:40 +0100
committerSascha Hauer <s.hauer@pengutronix.de>2013-06-27 08:38:04 +0200
commite06aa069652c99f5951f2e89a3af952aa484a3bc (patch)
treec258eedae2efacc1df1143d1bf10cccfed2c639b /include/ddr_spd.h
parent9bd04c9adb6f0adaf408773d114d0f183e8f6943 (diff)
downloadbarebox-e06aa069652c99f5951f2e89a3af952aa484a3bc.tar.gz
common: DDR2 SPD checksum.
The code calculates the DDR2 SPD checksum as per JEDEC standard No 21-C Appendix X (revision 1.2) The code is based on the equivalent files from U-Boot version git-a71d45d. Signed-off-by: Renaud Barbier <renaud.barbier@ge.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'include/ddr_spd.h')
-rw-r--r--include/ddr_spd.h135
1 files changed, 135 insertions, 0 deletions
diff --git a/include/ddr_spd.h b/include/ddr_spd.h
new file mode 100644
index 0000000000..c8762a28df
--- /dev/null
+++ b/include/ddr_spd.h
@@ -0,0 +1,135 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#ifndef _DDR_SPD_H_
+#define _DDR_SPD_H_
+
+/*
+ * Format from "JEDEC Appendix X: Serial Presence Detects for DDR2 SDRAM",
+ * SPD Revision 1.2
+ */
+struct ddr2_spd_eeprom_s {
+ uint8_t info_size; /* 0 # bytes written into serial memory */
+ uint8_t chip_size; /* 1 Total # bytes of SPD memory device */
+ uint8_t mem_type; /* 2 Fundamental memory type */
+ uint8_t nrow_addr; /* 3 # of Row Addresses on this assembly */
+ uint8_t ncol_addr; /* 4 # of Column Addrs on this assembly */
+ uint8_t mod_ranks; /* 5 Number of DIMM Ranks */
+ uint8_t dataw; /* 6 Module Data Width */
+ uint8_t res_7; /* 7 Reserved */
+ uint8_t voltage; /* 8 Voltage intf std of this assembly */
+ uint8_t clk_cycle; /* 9 SDRAM Cycle time @ CL=X */
+ uint8_t clk_access; /* 10 SDRAM Access from Clk @ CL=X (tAC) */
+ uint8_t config; /* 11 DIMM Configuration type */
+ uint8_t refresh; /* 12 Refresh Rate/Type */
+ uint8_t primw; /* 13 Primary SDRAM Width */
+ uint8_t ecw; /* 14 Error Checking SDRAM width */
+ uint8_t res_15; /* 15 Reserved */
+ uint8_t burstl; /* 16 Burst Lengths Supported */
+ uint8_t nbanks; /* 17 # of Banks on Each SDRAM Device */
+ uint8_t cas_lat; /* 18 CAS# Latencies Supported */
+ uint8_t mech_char; /* 19 DIMM Mechanical Characteristics */
+ uint8_t dimm_type; /* 20 DIMM type information */
+ uint8_t mod_attr; /* 21 SDRAM Module Attributes */
+ uint8_t dev_attr; /* 22 SDRAM Device Attributes */
+ uint8_t clk_cycle2; /* 23 Min SDRAM Cycle time @ CL=X-1 */
+ uint8_t clk_access2; /* 24 SDRAM Access from Clk @ CL=X-1 (tAC) */
+ uint8_t clk_cycle3; /* 25 Min SDRAM Cycle time @ CL=X-2 */
+ uint8_t clk_access3; /* 26 Max Access from Clk @ CL=X-2 (tAC) */
+ uint8_t trp; /* 27 Min Row Precharge Time (tRP)*/
+ uint8_t trrd; /* 28 Min Row Active to Row Active (tRRD) */
+ uint8_t trcd; /* 29 Min RAS to CAS Delay (tRCD) */
+ uint8_t tras; /* 30 Minimum RAS Pulse Width (tRAS) */
+ uint8_t rank_dens; /* 31 Density of each rank on module */
+ uint8_t ca_setup; /* 32 Addr+Cmd Setup Time Before Clk (tIS) */
+ uint8_t ca_hold; /* 33 Addr+Cmd Hold Time After Clk (tIH) */
+ uint8_t data_setup; /* 34 Data Input Setup Time Before Strobe
+ (tDS) */
+ uint8_t data_hold; /* 35 Data Input Hold Time
+ After Strobe (tDH) */
+ uint8_t twr; /* 36 Write Recovery time tWR */
+ uint8_t twtr; /* 37 Int write to read delay tWTR */
+ uint8_t trtp; /* 38 Int read to precharge delay tRTP */
+ uint8_t mem_probe; /* 39 Mem analysis probe characteristics */
+ uint8_t trctrfc_ext; /* 40 Extensions to trc and trfc */
+ uint8_t trc; /* 41 Min Active to Auto refresh time tRC */
+ uint8_t trfc; /* 42 Min Auto to Active period tRFC */
+ uint8_t tckmax; /* 43 Max device cycle time tCKmax */
+ uint8_t tdqsq; /* 44 Max DQS to DQ skew (tDQSQ max) */
+ uint8_t tqhs; /* 45 Max Read DataHold skew (tQHS) */
+ uint8_t pll_relock; /* 46 PLL Relock time */
+ uint8_t Tcasemax; /* 47 Tcasemax */
+ uint8_t psiTAdram; /* 48 Thermal Resistance of DRAM Package
+ from Top (Case) to Ambient
+ (Psi T-A DRAM) */
+ uint8_t dt0_mode; /* 49 DRAM Case Temperature Rise from
+ Ambient due to Activate-Precharge/Mode
+ Bits (DT0/Mode Bits) */
+ uint8_t dt2n_dt2q; /* 50 DRAM Case Temperature Rise from
+ Ambient due to Precharge/Quiet Standby
+ (DT2N/DT2Q) */
+ uint8_t dt2p; /* 51 DRAM Case Temperature Rise from
+ Ambient due to Precharge Power-Down
+ (DT2P) */
+ uint8_t dt3n; /* 52 DRAM Case Temperature Rise from
+ Ambient due to Active Standby (DT3N) */
+ uint8_t dt3pfast; /* 53 DRAM Case Temperature Rise from
+ Ambient due to Active Power-Down with
+ Fast PDN Exit (DT3Pfast) */
+ uint8_t dt3pslow; /* 54 DRAM Case Temperature Rise from
+ Ambient due to Active Power-Down with
+ Slow PDN Exit (DT3Pslow) */
+ uint8_t dt4r_dt4r4w; /* 55 DRAM Case Temperature Rise from
+ Ambient due to Page Open Burst
+ Read/DT4R4W Mode Bit
+ (DT4R/DT4R4W Mode Bit) */
+ uint8_t dt5b; /* 56 DRAM Case Temperature Rise from
+ Ambient due to Burst Refresh (DT5B) */
+ uint8_t dt7; /* 57 DRAM Case Temperature Rise from
+ Ambient due to Bank Interleave Reads
+ with Auto-Precharge (DT7) */
+ uint8_t psiTApll; /* 58 Thermal Resistance of PLL Package
+ form Top (Case) to Ambient
+ (Psi T-A PLL) */
+ uint8_t psiTAreg; /* 59 Thermal Reisitance of Register
+ Package from Top (Case) to Ambient
+ (Psi T-A Register) */
+ uint8_t dtpllactive; /* 60 PLL Case Temperature Rise from
+ Ambient due to PLL Active
+ (DT PLL Active) */
+ uint8_t dtregact; /* 61 Register Case Temperature Rise from
+ Ambient due to Register Active/Mode
+ Bit (DT Register Active/Mode Bit) */
+ uint8_t spd_rev; /* 62 SPD Data Revision Code */
+ uint8_t cksum; /* 63 Checksum for bytes 0-62 */
+ uint8_t mid[8]; /* 64 Mfr's JEDEC ID code per JEP-106 */
+ uint8_t mloc; /* 72 Manufacturing Location */
+ uint8_t mpart[18]; /* 73 Manufacturer's Part Number */
+ uint8_t rev[2]; /* 91 Revision Code */
+ uint8_t mdate[2]; /* 93 Manufacturing Date */
+ uint8_t sernum[4]; /* 95 Assembly Serial Number */
+ uint8_t mspec[27]; /* 99-127 Manufacturer Specific Data */
+
+};
+
+extern uint32_t ddr2_spd_checksum_pass(const struct ddr2_spd_eeprom_s *spd);
+
+/* * Byte 2 Fundamental Memory Types. */
+#define SPD_MEMTYPE_DDR2 (0x08)
+
+/* DIMM Type for DDR2 SPD (according to v1.3) */
+#define DDR2_SPD_DIMMTYPE_RDIMM (0x01)
+#define DDR2_SPD_DIMMTYPE_UDIMM (0x02)
+#define DDR2_SPD_DIMMTYPE_SO_DIMM (0x04)
+#define DDR2_SPD_DIMMTYPE_72B_SO_CDIMM (0x06)
+#define DDR2_SPD_DIMMTYPE_72B_SO_RDIMM (0x07)
+#define DDR2_SPD_DIMMTYPE_MICRO_DIMM (0x08)
+#define DDR2_SPD_DIMMTYPE_MINI_RDIMM (0x10)
+#define DDR2_SPD_DIMMTYPE_MINI_UDIMM (0x20)
+
+#endif /* _DDR_SPD_H_ */