summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--README54
-rw-r--r--board/cds/common/ft_board.c49
-rw-r--r--board/cds/common/via.c99
-rw-r--r--board/cds/common/via.h18
-rw-r--r--board/cds/mpc8541cds/Makefile4
-rw-r--r--board/cds/mpc8541cds/init.S12
-rw-r--r--board/cds/mpc8541cds/mpc8541cds.c32
-rw-r--r--board/cds/mpc8548cds/Makefile4
-rw-r--r--board/cds/mpc8548cds/init.S12
-rw-r--r--board/cds/mpc8548cds/mpc8548cds.c32
-rw-r--r--board/cds/mpc8555cds/Makefile4
-rw-r--r--board/cds/mpc8555cds/init.S12
-rw-r--r--board/cds/mpc8555cds/mpc8555cds.c37
-rw-r--r--board/mpc8540ads/mpc8540ads.c45
-rw-r--r--board/mpc8560ads/mpc8560ads.c9
-rw-r--r--board/stxxtc/Makefile10
-rw-r--r--board/stxxtc/oftree.dts52
-rw-r--r--common/cmd_bootm.c42
-rw-r--r--common/ft_build.c331
-rw-r--r--cpu/mpc85xx/cpu.c50
-rw-r--r--cpu/mpc85xx/cpu_init.c1
-rw-r--r--cpu/mpc85xx/pci.c185
-rw-r--r--doc/README.mpc85xxads3
-rw-r--r--drivers/pci_auto.c2
-rw-r--r--include/asm-ppc/immap_85xx.h25
-rw-r--r--include/configs/MPC8540ADS.h26
-rw-r--r--include/configs/MPC8541CDS.h31
-rw-r--r--include/configs/MPC8548CDS.h33
-rw-r--r--include/configs/MPC8555CDS.h33
-rw-r--r--include/configs/MPC8560ADS.h12
-rw-r--r--include/ft_build.h23
-rw-r--r--include/pci.h5
32 files changed, 799 insertions, 488 deletions
diff --git a/README b/README
index e772c1af00..621f3f3bd3 100644
--- a/README
+++ b/README
@@ -447,6 +447,11 @@ The following options need to be configured:
Board code has addition modification that it wants to make
to the flat device tree before handing it off to the kernel
+ CONFIG_OF_BOOT_CPU
+
+ This define fills in the correct boot cpu in the boot
+ param header, the default value is zero if undefined.
+
- Serial Ports:
CFG_PL010_SERIAL
@@ -3019,6 +3024,55 @@ format!) to the "bootm" command:
bash#
+Boot Linux and pass a flat device tree:
+-----------
+
+First, U-Boot must be compiled with the appropriate defines. See the section
+titled "Linux Kernel Interface" above for a more in depth explanation. The
+following is an example of how to start a kernel and pass an updated
+flat device tree:
+
+=> print oftaddr
+oftaddr=0x300000
+=> print oft
+oft=oftrees/mpc8540ads.dtb
+=> tftp $oftaddr $oft
+Speed: 1000, full duplex
+Using TSEC0 device
+TFTP from server 192.168.1.1; our IP address is 192.168.1.101
+Filename 'oftrees/mpc8540ads.dtb'.
+Load address: 0x300000
+Loading: #
+done
+Bytes transferred = 4106 (100a hex)
+=> tftp $loadaddr $bootfile
+Speed: 1000, full duplex
+Using TSEC0 device
+TFTP from server 192.168.1.1; our IP address is 192.168.1.2
+Filename 'uImage'.
+Load address: 0x200000
+Loading:############
+done
+Bytes transferred = 1029407 (fb51f hex)
+=> print loadaddr
+loadaddr=200000
+=> print oftaddr
+oftaddr=0x300000
+=> bootm $loadaddr - $oftaddr
+## Booting image at 00200000 ...
+ Image Name: Linux-2.6.17-dirty
+ Image Type: PowerPC Linux Kernel Image (gzip compressed)
+ Data Size: 1029343 Bytes = 1005.2 kB
+ Load Address: 00000000
+ Entry Point: 00000000
+ Verifying Checksum ... OK
+ Uncompressing Kernel Image ... OK
+Booting using flat device tree at 0x300000
+Using MPC85xx ADS machine description
+Memory CAM mapping: CAM0=256Mb, CAM1=256Mb, CAM2=0Mb residual: 0Mb
+[snip]
+
+
More About U-Boot Image Types:
------------------------------
diff --git a/board/cds/common/ft_board.c b/board/cds/common/ft_board.c
new file mode 100644
index 0000000000..77d1d851d9
--- /dev/null
+++ b/board/cds/common/ft_board.c
@@ -0,0 +1,49 @@
+/*
+ * Copyright 2004 Freescale Semiconductor.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+extern void ft_cpu_setup(void *blob, bd_t *bd);
+#endif
+
+
+#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_board_setup(void *blob, bd_t *bd)
+{
+ u32 *p;
+ int len;
+
+#ifdef CONFIG_PCI
+ ft_pci_setup(blob, bd);
+#endif
+ ft_cpu_setup(blob, bd);
+
+ p = ft_get_prop(blob, "/memory/reg", &len);
+ if (p != NULL) {
+ *p++ = cpu_to_be32(bd->bi_memstart);
+ *p = cpu_to_be32(bd->bi_memsize);
+ }
+}
+#endif
diff --git a/board/cds/common/via.c b/board/cds/common/via.c
new file mode 100644
index 0000000000..68c8d212f4
--- /dev/null
+++ b/board/cds/common/via.c
@@ -0,0 +1,99 @@
+/*
+ * Copyright 2006 Freescale Semiconductor.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <pci.h>
+
+/* Config the VIA chip */
+void mpc85xx_config_via(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab)
+{
+ pci_dev_t bridge;
+
+ /* Enable USB and IDE functions */
+ pci_hose_write_config_byte(hose, dev, 0x48, 0x08);
+
+ pciauto_config_device(hose, dev);
+
+ /*
+ * Force the backplane P2P bridge to have a window
+ * open from 0x00000000-0x00001fff in PCI I/O space.
+ * This allows legacy I/O (i8259, etc) on the VIA
+ * southbridge to be accessed.
+ */
+ bridge = PCI_BDF(0,17,0);
+ pci_hose_write_config_byte(hose, bridge, PCI_IO_BASE, 0);
+ pci_hose_write_config_word(hose, bridge, PCI_IO_BASE_UPPER16, 0);
+ pci_hose_write_config_byte(hose, bridge, PCI_IO_LIMIT, 0x10);
+ pci_hose_write_config_word(hose, bridge, PCI_IO_LIMIT_UPPER16, 0);
+}
+
+/* Function 1, IDE */
+void mpc85xx_config_via_usbide(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab)
+{
+ pciauto_config_device(hose, dev);
+ /*
+ * Since the P2P window was forced to cover the fixed
+ * legacy I/O addresses, it is necessary to manually
+ * place the base addresses for the IDE and USB functions
+ * within this window.
+ */
+ pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0x1ff8);
+ pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_1, 0x1ff4);
+ pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_2, 0x1fe8);
+ pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_3, 0x1fe4);
+ pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_4, 0x1fd0);
+}
+
+/* Function 2, USB ports 0-1 */
+void mpc85xx_config_via_usb(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab)
+{
+ pciauto_config_device(hose, dev);
+
+ pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_4, 0x1fa0);
+}
+
+/* Function 3, USB ports 2-3 */
+void mpc85xx_config_via_usb2(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab)
+{
+ pciauto_config_device(hose, dev);
+
+ pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_4, 0x1f80);
+}
+
+/* Function 5, Power Management */
+void mpc85xx_config_via_power(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab)
+{
+ pciauto_config_device(hose, dev);
+
+ pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0x1e00);
+ pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_1, 0x1dfc);
+ pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_2, 0x1df8);
+}
+
+/* Function 6, AC97 Interface */
+void mpc85xx_config_via_ac97(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab)
+{
+ pciauto_config_device(hose, dev);
+
+ pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0x1c00);
+}
+
diff --git a/board/cds/common/via.h b/board/cds/common/via.h
new file mode 100644
index 0000000000..77cfacc526
--- /dev/null
+++ b/board/cds/common/via.h
@@ -0,0 +1,18 @@
+#ifndef _MPC85xx_VIA_H
+void mpc85xx_config_via(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab);
+
+/* Function 1, IDE */
+void mpc85xx_config_via_usbide(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab);
+
+/* Function 2, USB ports 0-1 */
+void mpc85xx_config_via_usb(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab);
+
+/* Function 3, USB ports 2-3 */
+void mpc85xx_config_via_usb2(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab);
+
+/* Function 5, Power Management */
+void mpc85xx_config_via_power(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab);
+
+/* Function 6, AC97 Interface */
+void mpc85xx_config_via_ac97(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab);
+#endif /* _MPC85xx_VIA_H */
diff --git a/board/cds/mpc8541cds/Makefile b/board/cds/mpc8541cds/Makefile
index 0d4abbd71d..d202281d45 100644
--- a/board/cds/mpc8541cds/Makefile
+++ b/board/cds/mpc8541cds/Makefile
@@ -28,7 +28,9 @@ LIB = lib$(BOARD).a
OBJS := $(BOARD).o \
../common/cadmus.o \
- ../common/eeprom.o
+ ../common/eeprom.o \
+ ../common/ft_board.o \
+ ../common/via.o
SOBJS := init.o
diff --git a/board/cds/mpc8541cds/init.S b/board/cds/mpc8541cds/init.S
index 53dcd0d762..978bda5e4d 100644
--- a/board/cds/mpc8541cds/init.S
+++ b/board/cds/mpc8541cds/init.S
@@ -210,8 +210,8 @@ tlb1_entry:
* 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
* 0xa000_0000 0xbfff_ffff PCI2 MEM 512M
* 0xe000_0000 0xe000_ffff CCSR 1M
- * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
- * 0xe300_0000 0xe3ff_ffff PCI2 IO 16M
+ * 0xe200_0000 0xe20f_ffff PCI1 IO 1M
+ * 0xe210_0000 0xe21f_ffff PCI2 IO 1M
* 0xf000_0000 0xf7ff_ffff SDRAM 128M
* 0xf800_0000 0xf80f_ffff NVRAM/CADMUS (*) 1M
* 0xff00_0000 0xff7f_ffff FLASH (2nd bank) 8M
@@ -234,11 +234,11 @@ tlb1_entry:
#define LAWBAR2 ((CFG_PCI2_MEM_BASE>>12) & 0xfffff)
#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M))
-#define LAWBAR3 ((CFG_PCI1_IO_BASE>>12) & 0xfffff)
-#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_16M))
+#define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff)
+#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_1M))
-#define LAWBAR4 ((CFG_PCI2_IO_BASE>>12) & 0xfffff)
-#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_16M))
+#define LAWBAR4 ((CFG_PCI2_IO_PHYS>>12) & 0xfffff)
+#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_1M))
/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
#define LAWBAR5 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
diff --git a/board/cds/mpc8541cds/mpc8541cds.c b/board/cds/mpc8541cds/mpc8541cds.c
index 6b8aa68f54..c2b3009fd2 100644
--- a/board/cds/mpc8541cds/mpc8541cds.c
+++ b/board/cds/mpc8541cds/mpc8541cds.c
@@ -31,6 +31,7 @@
#include "../common/cadmus.h"
#include "../common/eeprom.h"
+#include "../common/via.h"
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
extern void ddr_enable_ecc(unsigned int dram_size);
@@ -468,26 +469,25 @@ testdram(void)
#endif
#if defined(CONFIG_PCI)
-
-/*
- * Initialize PCI Devices, report devices found.
+/* For some reason the Tundra PCI bridge shows up on itself as a
+ * different device. Work around that by refusing to configure it.
*/
+void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab) { }
-#ifndef CONFIG_PCI_PNP
static struct pci_config_table pci_mpc85xxcds_config_table[] = {
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_IDSEL_NUMBER, PCI_ANY_ID,
- pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
- PCI_ENET0_MEMADDR,
- PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
- } },
- { }
+ {0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}},
+ {0x1106, 0x0686, PCI_ANY_ID, 1, 2, 0, mpc85xx_config_via, {0,0,0}},
+ {0x1106, 0x0571, PCI_ANY_ID, 1, 2, 1, mpc85xx_config_via_usbide, {0,0,0}},
+ {0x1105, 0x3038, PCI_ANY_ID, 1, 2, 2, mpc85xx_config_via_usb, {0,0,0}},
+ {0x1106, 0x3038, PCI_ANY_ID, 1, 2, 3, mpc85xx_config_via_usb2, {0,0,0}},
+ {0x1106, 0x3058, PCI_ANY_ID, 1, 2, 5, mpc85xx_config_via_power, {0,0,0}},
+ {0x1106, 0x3068, PCI_ANY_ID, 1, 2, 6, mpc85xx_config_via_ac97, {0,0,0}}
};
-#endif
-static struct pci_controller hose = {
-#ifndef CONFIG_PCI_PNP
- config_table: pci_mpc85xxcds_config_table,
+static struct pci_controller hose[] = {
+ { config_table: pci_mpc85xxcds_config_table,},
+#ifdef CONFIG_MPC85XX_PCI2
+ {},
#endif
};
@@ -497,7 +497,7 @@ void
pci_init_board(void)
{
#ifdef CONFIG_PCI
- extern void pci_mpc85xx_init(struct pci_controller *hose);
+ extern void pci_mpc85xx_init(struct pci_controller **hose);
pci_mpc85xx_init(&hose);
#endif
diff --git a/board/cds/mpc8548cds/Makefile b/board/cds/mpc8548cds/Makefile
index 0d4abbd71d..d202281d45 100644
--- a/board/cds/mpc8548cds/Makefile
+++ b/board/cds/mpc8548cds/Makefile
@@ -28,7 +28,9 @@ LIB = lib$(BOARD).a
OBJS := $(BOARD).o \
../common/cadmus.o \
- ../common/eeprom.o
+ ../common/eeprom.o \
+ ../common/ft_board.o \
+ ../common/via.o
SOBJS := init.o
diff --git a/board/cds/mpc8548cds/init.S b/board/cds/mpc8548cds/init.S
index 53dcd0d762..978bda5e4d 100644
--- a/board/cds/mpc8548cds/init.S
+++ b/board/cds/mpc8548cds/init.S
@@ -210,8 +210,8 @@ tlb1_entry:
* 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
* 0xa000_0000 0xbfff_ffff PCI2 MEM 512M
* 0xe000_0000 0xe000_ffff CCSR 1M
- * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
- * 0xe300_0000 0xe3ff_ffff PCI2 IO 16M
+ * 0xe200_0000 0xe20f_ffff PCI1 IO 1M
+ * 0xe210_0000 0xe21f_ffff PCI2 IO 1M
* 0xf000_0000 0xf7ff_ffff SDRAM 128M
* 0xf800_0000 0xf80f_ffff NVRAM/CADMUS (*) 1M
* 0xff00_0000 0xff7f_ffff FLASH (2nd bank) 8M
@@ -234,11 +234,11 @@ tlb1_entry:
#define LAWBAR2 ((CFG_PCI2_MEM_BASE>>12) & 0xfffff)
#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M))
-#define LAWBAR3 ((CFG_PCI1_IO_BASE>>12) & 0xfffff)
-#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_16M))
+#define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff)
+#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_1M))
-#define LAWBAR4 ((CFG_PCI2_IO_BASE>>12) & 0xfffff)
-#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_16M))
+#define LAWBAR4 ((CFG_PCI2_IO_PHYS>>12) & 0xfffff)
+#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_1M))
/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
#define LAWBAR5 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
diff --git a/board/cds/mpc8548cds/mpc8548cds.c b/board/cds/mpc8548cds/mpc8548cds.c
index 5bc08900a4..6eedb4a209 100644
--- a/board/cds/mpc8548cds/mpc8548cds.c
+++ b/board/cds/mpc8548cds/mpc8548cds.c
@@ -30,6 +30,7 @@
#include "../common/cadmus.h"
#include "../common/eeprom.h"
+#include "../common/via.h"
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
extern void ddr_enable_ecc(unsigned int dram_size);
@@ -293,26 +294,25 @@ testdram(void)
#endif
#if defined(CONFIG_PCI)
-
-/*
- * Initialize PCI Devices, report devices found.
+/* For some reason the Tundra PCI bridge shows up on itself as a
+ * different device. Work around that by refusing to configure it.
*/
+void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab) { }
-#ifndef CONFIG_PCI_PNP
static struct pci_config_table pci_mpc85xxcds_config_table[] = {
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_IDSEL_NUMBER, PCI_ANY_ID,
- pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
- PCI_ENET0_MEMADDR,
- PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
- } },
- { }
+ {0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}},
+ {0x1106, 0x0686, PCI_ANY_ID, 1, 2, 0, mpc85xx_config_via, {0,0,0}},
+ {0x1106, 0x0571, PCI_ANY_ID, 1, 2, 1, mpc85xx_config_via_usbide, {0,0,0}},
+ {0x1105, 0x3038, PCI_ANY_ID, 1, 2, 2, mpc85xx_config_via_usb, {0,0,0}},
+ {0x1106, 0x3038, PCI_ANY_ID, 1, 2, 3, mpc85xx_config_via_usb2, {0,0,0}},
+ {0x1106, 0x3058, PCI_ANY_ID, 1, 2, 5, mpc85xx_config_via_power, {0,0,0}},
+ {0x1106, 0x3068, PCI_ANY_ID, 1, 2, 6, mpc85xx_config_via_ac97, {0,0,0}}
};
-#endif
-static struct pci_controller hose = {
-#ifndef CONFIG_PCI_PNP
- config_table: pci_mpc85xxcds_config_table,
+static struct pci_controller hose[] = {
+ { config_table: pci_mpc85xxcds_config_table,},
+#ifdef CONFIG_MPC85XX_PCI2
+ {},
#endif
};
@@ -322,7 +322,7 @@ void
pci_init_board(void)
{
#ifdef CONFIG_PCI
- extern void pci_mpc85xx_init(struct pci_controller *hose);
+ extern void pci_mpc85xx_init(struct pci_controller **hose);
pci_mpc85xx_init(&hose);
#endif
diff --git a/board/cds/mpc8555cds/Makefile b/board/cds/mpc8555cds/Makefile
index 0d4abbd71d..d202281d45 100644
--- a/board/cds/mpc8555cds/Makefile
+++ b/board/cds/mpc8555cds/Makefile
@@ -28,7 +28,9 @@ LIB = lib$(BOARD).a
OBJS := $(BOARD).o \
../common/cadmus.o \
- ../common/eeprom.o
+ ../common/eeprom.o \
+ ../common/ft_board.o \
+ ../common/via.o
SOBJS := init.o
diff --git a/board/cds/mpc8555cds/init.S b/board/cds/mpc8555cds/init.S
index 53dcd0d762..978bda5e4d 100644
--- a/board/cds/mpc8555cds/init.S
+++ b/board/cds/mpc8555cds/init.S
@@ -210,8 +210,8 @@ tlb1_entry:
* 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
* 0xa000_0000 0xbfff_ffff PCI2 MEM 512M
* 0xe000_0000 0xe000_ffff CCSR 1M
- * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
- * 0xe300_0000 0xe3ff_ffff PCI2 IO 16M
+ * 0xe200_0000 0xe20f_ffff PCI1 IO 1M
+ * 0xe210_0000 0xe21f_ffff PCI2 IO 1M
* 0xf000_0000 0xf7ff_ffff SDRAM 128M
* 0xf800_0000 0xf80f_ffff NVRAM/CADMUS (*) 1M
* 0xff00_0000 0xff7f_ffff FLASH (2nd bank) 8M
@@ -234,11 +234,11 @@ tlb1_entry:
#define LAWBAR2 ((CFG_PCI2_MEM_BASE>>12) & 0xfffff)
#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M))
-#define LAWBAR3 ((CFG_PCI1_IO_BASE>>12) & 0xfffff)
-#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_16M))
+#define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff)
+#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_1M))
-#define LAWBAR4 ((CFG_PCI2_IO_BASE>>12) & 0xfffff)
-#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_16M))
+#define LAWBAR4 ((CFG_PCI2_IO_PHYS>>12) & 0xfffff)
+#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_1M))
/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
#define LAWBAR5 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
diff --git a/board/cds/mpc8555cds/mpc8555cds.c b/board/cds/mpc8555cds/mpc8555cds.c
index 18adf5b9e6..012181c31d 100644
--- a/board/cds/mpc8555cds/mpc8555cds.c
+++ b/board/cds/mpc8555cds/mpc8555cds.c
@@ -29,6 +29,7 @@
#include "../common/cadmus.h"
#include "../common/eeprom.h"
+#include "../common/via.h"
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
extern void ddr_enable_ecc(unsigned int dram_size);
@@ -464,31 +465,33 @@ testdram(void)
}
#endif
-#if defined(CONFIG_PCI)
-
-/*
- * Initialize PCI Devices, report devices found.
+#ifdef CONFIG_PCI
+/* For some reason the Tundra PCI bridge shows up on itself as a
+ * different device. Work around that by refusing to configure it
*/
+void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab) { }
-#ifndef CONFIG_PCI_PNP
static struct pci_config_table pci_mpc85xxcds_config_table[] = {
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_IDSEL_NUMBER, PCI_ANY_ID,
- pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
- PCI_ENET0_MEMADDR,
- PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
- } },
- { }
+ {0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}},
+ {0x1106, 0x0686, PCI_ANY_ID, 1, 2, 0, mpc85xx_config_via, {0,0,0}},
+ {0x1106, 0x0571, PCI_ANY_ID, 1, 2, 1, mpc85xx_config_via_usbide, {0,0,0}},
+ {0x1105, 0x3038, PCI_ANY_ID, 1, 2, 2, mpc85xx_config_via_usb, {0,0,0}},
+ {0x1106, 0x3038, PCI_ANY_ID, 1, 2, 3, mpc85xx_config_via_usb2, {0,0,0}},
+ {0x1106, 0x3058, PCI_ANY_ID, 1, 2, 5, mpc85xx_config_via_power, {0,0,0}},
+ {0x1106, 0x3068, PCI_ANY_ID, 1, 2, 6, mpc85xx_config_via_ac97, {0,0,0}}
};
-#endif
-static struct pci_controller hose = {
-#ifndef CONFIG_PCI_PNP
+
+static struct pci_controller hose[] = {
+ {
config_table: pci_mpc85xxcds_config_table,
+ },
+#ifdef CONFIG_MPC85XX_PCI2
+ { }
#endif
};
-#endif /* CONFIG_PCI */
+#endif
void
pci_init_board(void)
@@ -496,6 +499,6 @@ pci_init_board(void)
#ifdef CONFIG_PCI
extern void pci_mpc85xx_init(struct pci_controller *hose);
- pci_mpc85xx_init(&hose);
+ pci_mpc85xx_init(hose);
#endif
}
diff --git a/board/mpc8540ads/mpc8540ads.c b/board/mpc8540ads/mpc8540ads.c
index d0eb6904ad..fbcb397290 100644
--- a/board/mpc8540ads/mpc8540ads.c
+++ b/board/mpc8540ads/mpc8540ads.c
@@ -31,6 +31,12 @@
#include <asm/immap_85xx.h>
#include <spd.h>
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+extern void ft_cpu_setup(void *blob, bd_t *bd);
+#endif
+
+
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
extern void ddr_enable_ecc(unsigned int dram_size);
#endif
@@ -311,24 +317,8 @@ long int fixed_sdram (void)
* Initialize PCI Devices, report devices found.
*/
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_mpc85xxads_config_table[] = {
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_IDSEL_NUMBER, PCI_ANY_ID,
- pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
- PCI_ENET0_MEMADDR,
- PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
- } },
- { }
-};
-#endif
-
-static struct pci_controller hose = {
-#ifndef CONFIG_PCI_PNP
- config_table: pci_mpc85xxads_config_table,
-#endif
-};
+static struct pci_controller hose;
#endif /* CONFIG_PCI */
@@ -342,3 +332,24 @@ pci_init_board(void)
pci_mpc85xx_init(&hose);
#endif /* CONFIG_PCI */
}
+
+
+#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_board_setup(void *blob, bd_t *bd)
+{
+ u32 *p;
+ int len;
+
+#ifdef CONFIG_PCI
+ ft_pci_setup(blob, bd);
+#endif
+ ft_cpu_setup(blob, bd);
+
+ p = ft_get_prop(blob, "/memory/reg", &len);
+ if (p != NULL) {
+ *p++ = cpu_to_be32(bd->bi_memstart);
+ *p = cpu_to_be32(bd->bi_memsize);
+ }
+}
+#endif
diff --git a/board/mpc8560ads/mpc8560ads.c b/board/mpc8560ads/mpc8560ads.c
index 25f69a0bf5..f9d75e8051 100644
--- a/board/mpc8560ads/mpc8560ads.c
+++ b/board/mpc8560ads/mpc8560ads.c
@@ -544,3 +544,12 @@ pci_init_board(void)
pci_mpc85xx_init(&hose);
#endif /* CONFIG_PCI */
}
+
+
+#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_board_setup(void *blob, bd_t *bd)
+{
+ ft_cpu_setup(blob, bd);
+}
+#endif
diff --git a/board/stxxtc/Makefile b/board/stxxtc/Makefile
index 11065cfd2c..8c529a0611 100644
--- a/board/stxxtc/Makefile
+++ b/board/stxxtc/Makefile
@@ -25,19 +25,11 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
-OBJS = $(BOARD).o oftree.o
+OBJS = $(BOARD).o
$(LIB): .depend $(OBJS)
$(AR) crv $@ $(OBJS)
-%.dtb: %.dts
- dtc -f -V 0x10 -I dts -O dtb $< >$@
-
-%.c: %.dtb
- xxd -i $< \
- | sed -e "s/^unsigned char/const unsigned char/g" \
- | sed -e "s/^unsigned int/const unsigned int/g" > $@
-
#########################################################################
.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
diff --git a/board/stxxtc/oftree.dts b/board/stxxtc/oftree.dts
deleted file mode 100644
index e3f3017943..0000000000
--- a/board/stxxtc/oftree.dts
+++ /dev/null
@@ -1,52 +0,0 @@
-/ {
- model = "STXXTC V1";
- compatible = "STXXTC";
- #address-cells = <2>;
- #size-cells = <2>;
-
- cpus {
- linux,phandle = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- PowerPC,MPC870@0 {
- linux,phandle = <3>;
- name = "PowerPC,MPC870";
- device_type = "cpu";
- reg = <0>;
- clock-frequency = <0>; /* place-holder for runtime fillup */
- timebase-frequency = <0>; /* dido */
- linux,boot-cpu;
- i-cache-size = <2000>;
- d-cache-size = <2000>;
- 32-bit;
- };
- };
-
- memory@0 {
- device_type = "memory";
- reg = <00000000 00000000 00000000 20000000>;
- };
-
- /* copy of the bd_t information (place-holders) */
- bd_t {
- memstart = <0>;
- memsize = <0>;
- flashstart = <0>;
- flashsize = <0>;
- flashoffset = <0>;
- sramstart = <0>;
- sramsize = <0>;
-
- immr_base = <0>;
-
- bootflags = <0>;
- ip_addr = <0>;
- enetaddr = [ 00 00 00 00 00 00 ];
- ethspeed = <0>;
- intfreq = <0>;
- busfreq = <0>;
-
- baudrate = <0>;
- };
-
-};
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index e5d70fa202..0225cb7f27 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -465,6 +465,13 @@ U_BOOT_CMD(
"[addr [arg ...]]\n - boot application image stored in memory\n"
"\tpassing arguments 'arg ...'; when booting a Linux kernel,\n"
"\t'arg' can be the address of an initrd image\n"
+#ifdef CONFIG_OF_FLAT_TREE
+ "\tWhen booting a Linux kernel which requires a flat device-tree\n"
+ "\ta third argument is required which is the address of the of the\n"
+ "\tdevice-tree blob. To boot that kernel without an initrd image,\n"
+ "\tuse a '-' for the second argument. If you do not pass a third\n"
+ "\ta bd_info struct will be passed instead\n"
+#endif
);
#ifdef CONFIG_SILENT_CONSOLE
@@ -500,11 +507,6 @@ fixup_silent_linux ()
}
#endif /* CONFIG_SILENT_CONSOLE */
-#ifdef CONFIG_OF_FLAT_TREE
-extern const unsigned char oftree_dtb[];
-extern const unsigned int oftree_dtb_len;
-#endif
-
#ifdef CONFIG_PPC
static void
do_bootm_linux (cmd_tbl_t *cmdtp, int flag,
@@ -616,7 +618,17 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag,
/*
* Check if there is an initrd image
*/
+
+#ifdef CONFIG_OF_FLAT_TREE
+ /* Look for a '-' which indicates to ignore the ramdisk argument */
+ if (argc >= 3 && strcmp(argv[2], "-") == 0) {
+ debug ("Skipping initrd\n");
+ data = 0;
+ }
+ else
+#endif
if (argc >= 3) {
+ debug ("Not skipping initrd\n");
SHOW_BOOT_PROGRESS (9);
addr = simple_strtoul(argv[2], NULL, 16);
@@ -724,6 +736,15 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag,
len = data = 0;
}
+#ifdef CONFIG_OF_FLAT_TREE
+ if (argc >= 3)
+ {
+ of_flat_tree = (char *) simple_strtoul(argv[3], NULL, 16);
+ printf ("Booting using flat device tree at 0x%x\n",
+ of_flat_tree);
+ }
+#endif
+
if (!data) {
debug ("No initrd\n");
}
@@ -793,15 +814,6 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag,
initrd_end = 0;
}
-#ifdef CONFIG_OF_FLAT_TREE
- if (initrd_start == 0)
- of_flat_tree = (char *)(((ulong)kbd - OF_FLAT_TREE_MAX_SIZE -
- sizeof(bd_t)) & ~0xF);
- else
- of_flat_tree = (char *)((initrd_start - OF_FLAT_TREE_MAX_SIZE -
- sizeof(bd_t)) & ~0xF);
-#endif
-
debug ("## Transferring control to Linux (at address %08lx) ...\n",
(ulong)kernel);
@@ -824,7 +836,7 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag,
(*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end);
#else
- ft_setup(of_flat_tree, OF_FLAT_TREE_MAX_SIZE, kbd, initrd_start, initrd_end);
+ ft_setup(of_flat_tree, kbd, initrd_start, initrd_end);
/* ft_dump_blob(of_flat_tree); */
#if defined(CFG_INIT_RAM_LOCK) && (!defined(CONFIG_E500)||!defined(CONFIG_MPC86xx))
diff --git a/common/ft_build.c b/common/ft_build.c
index 782046ddae..b5a997c1ba 100644
--- a/common/ft_build.c
+++ b/common/ft_build.c
@@ -1,5 +1,22 @@
/*
* OF flat tree builder
+ * Written by: Pantelis Antoniou <pantelis.antoniou@gmail.com>
+ * Updated by: Matthew McClintock <msm@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
*/
#include <common.h>
@@ -13,44 +30,39 @@
#include <ft_build.h>
+#undef DEBUG
+
/* align addr on a size boundary - adjust address up if needed -- Cort */
#define _ALIGN(addr,size) (((addr)+(size)-1)&(~((size)-1)))
+#ifndef CONFIG_OF_BOOT_CPU
+#define CONFIG_OF_BOOT_CPU 0
+#endif
+#define SIZE_OF_RSVMAP_ENTRY (2*sizeof(u64))
static void ft_put_word(struct ft_cxt *cxt, u32 v)
{
- if (cxt->overflow) /* do nothing */
- return;
-
- /* check for overflow */
- if (cxt->p + 4 > cxt->pstr) {
- cxt->overflow = 1;
- return;
- }
+ memmove(cxt->p + sizeof(u32), cxt->p, cxt->p_end - cxt->p);
*(u32 *) cxt->p = cpu_to_be32(v);
- cxt->p += 4;
+ cxt->p += sizeof(u32);
+ cxt->p_end += sizeof(u32);
}
static inline void ft_put_bin(struct ft_cxt *cxt, const void *data, int sz)
{
- u8 *p;
+ int aligned_size = ((u8 *)_ALIGN((unsigned long)cxt->p + sz,
+ sizeof(u32))) - cxt->p;
- if (cxt->overflow) /* do nothing */
- return;
-
- /* next pointer pos */
- p = (u8 *) _ALIGN((unsigned long)cxt->p + sz, 4);
+ memmove(cxt->p + aligned_size, cxt->p, cxt->p_end - cxt->p);
- /* check for overflow */
- if (p > cxt->pstr) {
- cxt->overflow = 1;
- return;
- }
+ /* make sure the last bytes are zeroed */
+ memset(cxt->p + aligned_size - (aligned_size % sizeof(u32)), 0,
+ (aligned_size % sizeof(u32)));
memcpy(cxt->p, data, sz);
- if ((sz & 3) != 0)
- memset(cxt->p + sz, 0, 4 - (sz & 3));
- cxt->p = p;
+
+ cxt->p += aligned_size;
+ cxt->p_end += aligned_size;
}
void ft_begin_node(struct ft_cxt *cxt, const char *name)
@@ -73,10 +85,10 @@ static int lookup_string(struct ft_cxt *cxt, const char *name)
{
u8 *p;
- p = cxt->pstr;
- while (p < cxt->pstr_begin) {
+ p = cxt->p;
+ while (p < cxt->p_end) {
if (strcmp(p, name) == 0)
- return p - cxt->p_begin;
+ return p - cxt->p;
p += strlen(p) + 1;
}
@@ -85,24 +97,13 @@ static int lookup_string(struct ft_cxt *cxt, const char *name)
void ft_prop(struct ft_cxt *cxt, const char *name, const void *data, int sz)
{
- int len, off;
-
- if (cxt->overflow)
- return;
-
- len = strlen(name) + 1;
+ int off = 0;
off = lookup_string(cxt, name);
if (off == -1) {
- /* check if we have space */
- if (cxt->p + 12 + sz + len > cxt->pstr) {
- cxt->overflow = 1;
- return;
- }
-
- cxt->pstr -= len;
- memcpy(cxt->pstr, name, len);
- off = cxt->pstr - cxt->p_begin;
+ memcpy(cxt->p_end, name, strlen(name) + 1);
+ off = cxt->p_end - cxt->p;
+ cxt->p_end += strlen(name) + 2;
}
/* now put offset from beginning of *STRUCTURE* */
@@ -122,138 +123,63 @@ void ft_prop_int(struct ft_cxt *cxt, const char *name, int val)
{
u32 v = cpu_to_be32((u32) val);
- ft_prop(cxt, name, &v, 4);
+ ft_prop(cxt, name, &v, sizeof(u32));
}
-/* start construction of the flat OF tree */
-void ft_begin(struct ft_cxt *cxt, void *blob, int max_size)
+/* pick up and start working on a tree in place */
+void ft_init_cxt(struct ft_cxt *cxt, void *blob)
{
struct boot_param_header *bph = blob;
- u32 off;
- /* clear the cxt */
memset(cxt, 0, sizeof(*cxt));
cxt->bph = bph;
- cxt->max_size = max_size;
-
- /* zero everything in the header area */
- memset(bph, 0, sizeof(*bph));
-
- bph->magic = cpu_to_be32(OF_DT_HEADER);
- bph->version = cpu_to_be32(0x10);
- bph->last_comp_version = cpu_to_be32(0x10);
+ bph->boot_cpuid_phys = CONFIG_OF_BOOT_CPU;
- /* start pointers */
- cxt->pres_begin = (u8 *) _ALIGN((unsigned long)(bph + 1), 8);
- cxt->pres = cxt->pres_begin;
-
- off = (unsigned long)cxt->pres_begin - (unsigned long)bph;
- bph->off_mem_rsvmap = cpu_to_be32(off);
-
- ((u64 *) cxt->pres)[0] = 0; /* phys = 0, size = 0, terminate */
- ((u64 *) cxt->pres)[1] = 0;
+ /* find beginning and end of reserve map table (zeros in last entry) */
+ cxt->p_rsvmap = (u8 *)bph + bph->off_mem_rsvmap;
+ while ( ((uint64_t *)cxt->p_rsvmap)[0] != 0 &&
+ ((uint64_t *)cxt->p_rsvmap)[1] != 0 ) {
+ cxt->p_rsvmap += SIZE_OF_RSVMAP_ENTRY;
+ }
- cxt->p_anchor = cxt->pres + 16; /* over the terminator */
+ cxt->p_start = (char*)bph + bph->off_dt_struct;
+ cxt->p_end = (char *)bph + bph->totalsize;
+ cxt->p = (char *)bph + bph->off_dt_strings;
}
/* add a reserver physical area to the rsvmap */
-void ft_add_rsvmap(struct ft_cxt *cxt, u64 physaddr, u64 size)
+void ft_add_rsvmap(struct ft_cxt *cxt, u64 physstart, u64 physend)
{
- ((u64 *) cxt->pres)[0] = cpu_to_be64(physaddr); /* phys = 0, size = 0, terminate */
- ((u64 *) cxt->pres)[1] = cpu_to_be64(size);
-
- cxt->pres += 16; /* advance */
-
- ((u64 *) cxt->pres)[0] = 0; /* phys = 0, size = 0, terminate */
- ((u64 *) cxt->pres)[1] = 0;
-
- /* keep track of size */
- cxt->res_size = cxt->pres + 16 - cxt->pres_begin;
-
- cxt->p_anchor = cxt->pres + 16; /* over the terminator */
+ memmove(cxt->p_rsvmap + SIZE_OF_RSVMAP_ENTRY, cxt->p_rsvmap,
+ cxt->p_end - cxt->p_rsvmap);
+
+ ((u64 *)cxt->p_rsvmap)[0] = cpu_to_be64(physstart);
+ ((u64 *)cxt->p_rsvmap)[1] = cpu_to_be64(physend);
+ ((u64 *)cxt->p_rsvmap)[2] = 0;
+ ((u64 *)cxt->p_rsvmap)[3] = 0;
+
+ cxt->p_rsvmap += SIZE_OF_RSVMAP_ENTRY;
+ cxt->p_start += SIZE_OF_RSVMAP_ENTRY;
+ cxt->p += SIZE_OF_RSVMAP_ENTRY;
+ cxt->p_end += SIZE_OF_RSVMAP_ENTRY;
}
-void ft_begin_tree(struct ft_cxt *cxt)
+void ft_end_tree(struct ft_cxt *cxt)
{
- cxt->p_begin = cxt->p_anchor;
- cxt->pstr_begin = (char *)cxt->bph + cxt->max_size; /* point at the end */
-
- cxt->p = cxt->p_begin;
- cxt->pstr = cxt->pstr_begin;
+ ft_put_word(cxt, OF_DT_END);
}
-int ft_end_tree(struct ft_cxt *cxt)
-{
+/* update the boot param header with correct values */
+void ft_finalize_tree(struct ft_cxt *cxt) {
struct boot_param_header *bph = cxt->bph;
- int off, sz, sz1;
- u32 tag, v;
- u8 *p;
-
- ft_put_word(cxt, OF_DT_END);
-
- if (cxt->overflow)
- return -ENOMEM;
-
- /* size of the areas */
- cxt->struct_size = cxt->p - cxt->p_begin;
- cxt->strings_size = cxt->pstr_begin - cxt->pstr;
-
- /* the offset we must move */
- off = (cxt->pstr_begin - cxt->p_begin) - cxt->strings_size;
-
- /* the new strings start */
- cxt->pstr_begin = cxt->p_begin + cxt->struct_size;
-
- /* move the whole string area */
- memmove(cxt->pstr_begin, cxt->pstr, cxt->strings_size);
- /* now perform the fixup of the strings */
- p = cxt->p_begin;
- while ((tag = be32_to_cpu(*(u32 *) p)) != OF_DT_END) {
- p += 4;
-
- if (tag == OF_DT_BEGIN_NODE) {
- p = (u8 *) _ALIGN((unsigned long)p + strlen(p) + 1, 4);
- continue;
- }
-
- if (tag == OF_DT_END_NODE || tag == OF_DT_NOP)
- continue;
-
- if (tag != OF_DT_PROP)
- return -EINVAL;
-
- sz = be32_to_cpu(*(u32 *) p);
- p += 4;
-
- v = be32_to_cpu(*(u32 *) p);
- v -= off;
- *(u32 *) p = cpu_to_be32(v); /* move down */
- p += 4;
-
- p = (u8 *) _ALIGN((unsigned long)p + sz, 4);
- }
-
- /* fix sizes */
- p = (char *)cxt->bph;
- sz = (cxt->pstr_begin + cxt->strings_size) - p;
- sz1 = _ALIGN(sz, 16); /* align at 16 bytes */
- if (sz != sz1)
- memset(p + sz, 0, sz1 - sz);
- bph->totalsize = cpu_to_be32(sz1);
- bph->off_dt_struct = cpu_to_be32(cxt->p_begin - p);
- bph->off_dt_strings = cpu_to_be32(cxt->pstr_begin - p);
-
- /* the new strings start */
- cxt->pstr_begin = cxt->p_begin + cxt->struct_size;
- cxt->pstr = cxt->pstr_begin + cxt->strings_size;
-
- return 0;
+ bph->totalsize = cxt->p_end - (u8 *)bph;
+ bph->off_dt_struct = cxt->p_start - (u8 *)bph;
+ bph->off_dt_strings = cxt->p - (u8 *)bph;
+ bph->dt_strings_size = cxt->p_end - cxt->p;
}
-/**********************************************************************/
-
static inline int isprint(int c)
{
return c >= 0x20 && c <= 0x7e;
@@ -381,8 +307,8 @@ void ft_dump_blob(const void *bphp)
}
if (tag != OF_DT_PROP) {
- fprintf(stderr, "%*s ** Unknown tag 0x%08x\n",
- depth * shift, "", tag);
+ fprintf(stderr, "%*s ** Unknown tag 0x%08x at 0x%x\n",
+ depth * shift, "", tag, --p);
break;
}
sz = be32_to_cpu(*p++);
@@ -397,64 +323,15 @@ void ft_dump_blob(const void *bphp)
void ft_backtrack_node(struct ft_cxt *cxt)
{
- if (be32_to_cpu(*(u32 *) (cxt->p - 4)) != OF_DT_END_NODE)
- return; /* XXX only for node */
-
- cxt->p -= 4;
-}
-
-/* note that the root node of the blob is "peeled" off */
-void ft_merge_blob(struct ft_cxt *cxt, void *blob)
-{
- struct boot_param_header *bph = (struct boot_param_header *)blob;
- u32 *p_struct = (u32 *) ((char *)bph + be32_to_cpu(bph->off_dt_struct));
- u32 *p_strings =
- (u32 *) ((char *)bph + be32_to_cpu(bph->off_dt_strings));
- u32 tag, *p;
- char *s, *t;
- int depth, sz;
-
- if (be32_to_cpu(*(u32 *) (cxt->p - 4)) != OF_DT_END_NODE)
- return; /* XXX only for node */
-
- cxt->p -= 4;
-
- depth = 0;
- p = p_struct;
- while ((tag = be32_to_cpu(*p++)) != OF_DT_END) {
-
- /* printf("tag: 0x%08x (%d) - %d\n", tag, p - p_struct, depth); */
-
- if (tag == OF_DT_BEGIN_NODE) {
- s = (char *)p;
- p = (u32 *) _ALIGN((unsigned long)p + strlen(s) + 1, 4);
-
- if (depth++ > 0)
- ft_begin_node(cxt, s);
-
- continue;
- }
-
- if (tag == OF_DT_END_NODE) {
- ft_end_node(cxt);
- if (--depth == 0)
- break;
- continue;
- }
-
- if (tag == OF_DT_NOP)
- continue;
+ int i = 4;
- if (tag != OF_DT_PROP)
- break;
+ while (be32_to_cpu(*(u32 *) (cxt->p - i)) != OF_DT_END_NODE)
+ i += 4;
- sz = be32_to_cpu(*p++);
- s = (char *)p_strings + be32_to_cpu(*p++);
- t = (char *)p;
- p = (u32 *) _ALIGN((unsigned long)p + sz, 4);
+ memmove (cxt->p - i, cxt->p, cxt->p_end - cxt->p);
- ft_prop(cxt, s, t, sz);
- }
+ cxt->p_end -= i;
+ cxt->p -= i;
}
void *ft_get_prop(void *bphp, const char *propname, int *szp)
@@ -521,9 +398,6 @@ void *ft_get_prop(void *bphp, const char *propname, int *szp)
/********************************************************************/
-extern unsigned char oftree_dtb[];
-extern unsigned int oftree_dtb_len;
-
/* Function that returns a character from the environment */
extern uchar(*env_get_char) (int);
@@ -577,7 +451,7 @@ static const struct {
};
#endif
-void ft_setup(void *blob, int size, bd_t * bd, ulong initrd_start, ulong initrd_end)
+void ft_setup(void *blob, bd_t * bd, ulong initrd_start, ulong initrd_end)
{
u32 *p;
int len;
@@ -600,20 +474,16 @@ void ft_setup(void *blob, int size, bd_t * bd, ulong initrd_start, ulong initrd_
return;
}
- ft_begin(&cxt, blob, size);
+#ifdef DEBUG
+ printf ("recieved oftree\n");
+ ft_dump_blob(blob);
+#endif
+
+ ft_init_cxt(&cxt, blob);
if (initrd_start && initrd_end)
ft_add_rsvmap(&cxt, initrd_start, initrd_end - initrd_start + 1);
- ft_begin_tree(&cxt);
-
- ft_begin_node(&cxt, "");
-
- ft_end_node(&cxt);
-
- /* copy RO tree */
- ft_merge_blob(&cxt, oftree_dtb);
-
/* back into root */
ft_backtrack_node(&cxt);
@@ -642,8 +512,8 @@ void ft_setup(void *blob, int size, bd_t * bd, ulong initrd_start, ulong initrd_
#endif
ft_begin_node(&cxt, "chosen");
-
ft_prop_str(&cxt, "name", "chosen");
+
ft_prop_str(&cxt, "bootargs", getenv("bootargs"));
ft_prop_int(&cxt, "linux,platform", 0x600); /* what is this? */
if (initrd_start && initrd_end) {
@@ -659,11 +529,7 @@ void ft_setup(void *blob, int size, bd_t * bd, ulong initrd_start, ulong initrd_
ft_end_node(&cxt); /* end root */
ft_end_tree(&cxt);
-
- /*
- printf("merged OF-tree\n");
- ft_dump_blob(blob);
- */
+ ft_finalize_tree(&cxt);
#ifdef CONFIG_OF_HAS_BD_T
/* paste the bd_t at the end of the flat tree */
@@ -712,11 +578,12 @@ void ft_setup(void *blob, int size, bd_t * bd, ulong initrd_start, ulong initrd_
ft_board_setup(blob, bd);
#endif
- /*
- printf("final OF-tree\n");
- ft_dump_blob(blob);
- */
+ /* in case the size changed in the platform code */
+ ft_finalize_tree(&cxt);
+#ifdef DEBUG
+ printf("final OF-tree\n");
+ ft_dump_blob(blob);
+#endif
}
-
#endif
diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c
index f7fe22e3e1..0507c47e6e 100644
--- a/cpu/mpc85xx/cpu.c
+++ b/cpu/mpc85xx/cpu.c
@@ -30,7 +30,10 @@
#include <command.h>
#include <asm/cache.h>
-/* ------------------------------------------------------------------------- */
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+#endif
+
int checkcpu (void)
{
@@ -227,3 +230,48 @@ int dma_xfer(void *dest, uint count, void *src) {
return dma_check();
}
#endif
+
+
+#ifdef CONFIG_OF_FLAT_TREE
+void
+ft_cpu_setup(void *blob, bd_t *bd)
+{
+ u32 *p;
+ ulong clock;
+ int len;
+
+ clock = bd->bi_busfreq;
+ p = ft_get_prop(blob, "/cpus/" OF_CPU "/bus-frequency", &len);
+ if (p != NULL)
+ *p = cpu_to_be32(clock);
+
+ p = ft_get_prop(blob, "/" OF_SOC "/serial@4500/clock-frequency", &len);
+ if (p != NULL)
+ *p = cpu_to_be32(clock);
+
+ p = ft_get_prop(blob, "/" OF_SOC "/serial@4600/clock-frequency", &len);
+ if (p != NULL)
+ *p = cpu_to_be32(clock);
+
+#if defined(CONFIG_MPC85XX_TSEC1)
+ p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len);
+ memcpy(p, bd->bi_enetaddr, 6);
+#endif
+
+#if defined(CONFIG_HAS_ETH1)
+ p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/mac-address", &len);
+ memcpy(p, bd->bi_enet1addr, 6);
+#endif
+
+#if defined(CONFIG_HAS_ETH2)
+ p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/mac-address", &len);
+ memcpy(p, bd->bi_enet2addr, 6);
+#endif
+
+#if defined(CONFIG_HAS_ETH3)
+ p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/mac-address", &len);
+ memcpy(p, bd->bi_enet3addr, 6);
+#endif
+
+}
+#endif
diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c
index c12b47b589..9f4d36c1ab 100644
--- a/cpu/mpc85xx/cpu_init.c
+++ b/cpu/mpc85xx/cpu_init.c
@@ -32,6 +32,7 @@
DECLARE_GLOBAL_DATA_PTR;
+
#ifdef CONFIG_CPM2
static void config_8560_ioports (volatile immap_t * immr)
{
diff --git a/cpu/mpc85xx/pci.c b/cpu/mpc85xx/pci.c
index a94493e080..cfb7dcdc89 100644
--- a/cpu/mpc85xx/pci.c
+++ b/cpu/mpc85xx/pci.c
@@ -32,66 +32,93 @@
#if defined(CONFIG_PCI)
+static struct pci_controller *pci_hose;
+
void
-pci_mpc85xx_init(struct pci_controller *hose)
+pci_mpc85xx_init(struct pci_controller *board_hose)
{
+ u16 reg16;
+ u32 dev;
+
volatile immap_t *immap = (immap_t *)CFG_CCSRBAR;
volatile ccsr_pcix_t *pcix = &immap->im_pcix;
+ volatile ccsr_pcix_t *pcix2 = &immap->im_pcix2;
+ volatile ccsr_gur_t *gur = &immap->im_gur;
+ struct pci_controller * hose;
- u16 reg16;
+ pci_hose = board_hose;
+
+ hose = &pci_hose[0];
hose->first_busno = 0;
hose->last_busno = 0xff;
- pci_set_region(hose->regions + 0,
- CFG_PCI1_MEM_BASE,
- CFG_PCI1_MEM_PHYS,
- CFG_PCI1_MEM_SIZE,
- PCI_REGION_MEM);
-
- pci_set_region(hose->regions + 1,
- CFG_PCI1_IO_BASE,
- CFG_PCI1_IO_PHYS,
- CFG_PCI1_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = 2;
-
pci_setup_indirect(hose,
(CFG_IMMR+0x8000),
(CFG_IMMR+0x8004));
+ /*
+ * Hose scan.
+ */
+ dev = PCI_BDF(hose->first_busno, 0, 0);
+ pci_hose_read_config_word (hose, dev, PCI_COMMAND, &reg16);
+ reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
+
+ /*
+ * Clear non-reserved bits in status register.
+ */
+ pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
+
+ if (!(gur->pordevsr & PORDEVSR_PCI)) {
+ /* PCI-X init */
+ if (CONFIG_SYS_CLK_FREQ < 66000000)
+ printf("PCI-X will only work at 66 MHz\n");
+
+ reg16 = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
+ | PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
+ pci_hose_write_config_word(hose, dev, PCIX_COMMAND, reg16);
+ }
+
pcix->potar1 = (CFG_PCI1_MEM_BASE >> 12) & 0x000fffff;
pcix->potear1 = 0x00000000;
- pcix->powbar1 = (CFG_PCI1_MEM_BASE >> 12) & 0x000fffff;
+ pcix->powbar1 = (CFG_PCI1_MEM_PHYS >> 12) & 0x000fffff;
pcix->powbear1 = 0x00000000;
- pcix->powar1 = 0x8004401c; /* 512M MEM space */
+ pcix->powar1 = (POWAR_EN | POWAR_MEM_READ |
+ POWAR_MEM_WRITE | POWAR_MEM_512M);
- pcix->potar2 = 0x00000000;
+ pcix->potar2 = (CFG_PCI1_IO_BASE >> 12) & 0x000fffff;
pcix->potear2 = 0x00000000;
- pcix->powbar2 = (CFG_PCI1_IO_BASE >> 12) & 0x000fffff;
+ pcix->powbar2 = (CFG_PCI1_IO_PHYS >> 12) & 0x000fffff;
pcix->powbear2 = 0x00000000;
- pcix->powar2 = 0x80088017; /* 16M IO space */
+ pcix->powar2 = (POWAR_EN | POWAR_IO_READ |
+ POWAR_IO_WRITE | POWAR_IO_1M);
pcix->pitar1 = 0x00000000;
pcix->piwbar1 = 0x00000000;
- pcix->piwar1 = 0xa0f5501e; /* Enable, Prefetch, Local Mem,
- * Snoop R/W, 2G */
+ pcix->piwar1 = (PIWAR_EN | PIWAR_PF | PIWAR_LOCAL |
+ PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP | PIWAR_MEM_2G);
- /*
- * Hose scan.
- */
- pci_register_hose(hose);
+ pcix->powar3 = 0;
+ pcix->powar4 = 0;
+ pcix->piwar2 = 0;
+ pcix->piwar3 = 0;
- pci_read_config_word (PCI_BDF(0,0,0), PCI_COMMAND, &reg16);
- reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- pci_write_config_word(PCI_BDF(0,0,0), PCI_COMMAND, reg16);
+ pci_set_region(hose->regions + 0,
+ CFG_PCI1_MEM_BASE,
+ CFG_PCI1_MEM_PHYS,
+ CFG_PCI1_MEM_SIZE,
+ PCI_REGION_MEM);
- /*
- * Clear non-reserved bits in status register.
- */
- pci_write_config_word(PCI_BDF(0,0,0), PCI_STATUS, 0xffff);
- pci_write_config_byte(PCI_BDF(0,0,0), PCI_LATENCY_TIMER,0x80);
+ pci_set_region(hose->regions + 1,
+ CFG_PCI1_IO_BASE,
+ CFG_PCI1_IO_PHYS,
+ CFG_PCI1_IO_SIZE,
+ PCI_REGION_IO);
+
+ hose->region_count = 2;
+
+ pci_register_hose(hose);
#if defined(CONFIG_MPC8555CDS) || defined(CONFIG_MPC8541CDS)
/*
@@ -117,6 +144,94 @@ pci_mpc85xx_init(struct pci_controller *hose)
#endif
hose->last_busno = pci_hose_scan(hose);
+
+#ifdef CONFIG_MPC85XX_PCI2
+ hose = &pci_hose[1];
+
+ hose->first_busno = pci_hose[0].last_busno + 1;
+ hose->last_busno = 0xff;
+
+ pci_setup_indirect(hose,
+ (CFG_IMMR+0x9000),
+ (CFG_IMMR+0x9004));
+
+ dev = PCI_BDF(hose->first_busno, 0, 0);
+ pci_hose_read_config_word (hose, dev, PCI_COMMAND, &reg16);
+ reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
+
+ /*
+ * Clear non-reserved bits in status register.
+ */
+ pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
+
+ pcix2->potar1 = (CFG_PCI2_MEM_BASE >> 12) & 0x000fffff;
+ pcix2->potear1 = 0x00000000;
+ pcix2->powbar1 = (CFG_PCI2_MEM_PHYS >> 12) & 0x000fffff;
+ pcix2->powbear1 = 0x00000000;
+ pcix2->powar1 = (POWAR_EN | POWAR_MEM_READ |
+ POWAR_MEM_WRITE | POWAR_MEM_512M);
+
+ pcix2->potar2 = (CFG_PCI2_IO_BASE >> 12) & 0x000fffff;
+ pcix2->potear2 = 0x00000000;
+ pcix2->powbar2 = (CFG_PCI2_IO_PHYS >> 12) & 0x000fffff;
+ pcix2->powbear2 = 0x00000000;
+ pcix2->powar2 = (POWAR_EN | POWAR_IO_READ |
+ POWAR_IO_WRITE | POWAR_IO_1M);
+
+ pcix2->pitar1 = 0x00000000;
+ pcix2->piwbar1 = 0x00000000;
+ pcix2->piwar1 = (PIWAR_EN | PIWAR_PF | PIWAR_LOCAL |
+ PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP | PIWAR_MEM_2G);
+
+ pcix2->powar3 = 0;
+ pcix2->powar4 = 0;
+ pcix2->piwar2 = 0;
+ pcix2->piwar3 = 0;
+
+ pci_set_region(hose->regions + 0,
+ CFG_PCI2_MEM_BASE,
+ CFG_PCI2_MEM_PHYS,
+ CFG_PCI2_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ pci_set_region(hose->regions + 1,
+ CFG_PCI2_IO_BASE,
+ CFG_PCI2_IO_PHYS,
+ CFG_PCI2_IO_SIZE,
+ PCI_REGION_IO);
+
+ hose->region_count = 2;
+
+ /*
+ * Hose scan.
+ */
+ pci_register_hose(hose);
+
+ hose->last_busno = pci_hose_scan(hose);
+#endif
}
+#ifdef CONFIG_OF_FLAT_TREE
+void
+ft_pci_setup(void *blob, bd_t *bd)
+{
+ u32 *p;
+ int len;
+
+ p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8000/bus-range", &len);
+ if (p != NULL) {
+ p[0] = pci_hose[0].first_busno;
+ p[1] = pci_hose[0].last_busno;
+ }
+
+#ifdef CONFIG_MPC85XX_PCI2
+ p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@9000/bus-range", &len);
+ if (p != NULL) {
+ p[0] = pci_hose[1].first_busno;
+ p[1] = pci_hose[1].last_busno;
+ }
+#endif
+}
+#endif /* CONFIG_OF_FLAT_TREE */
#endif /* CONFIG_PCI */
diff --git a/doc/README.mpc85xxads b/doc/README.mpc85xxads
index f0cf782a8f..ae8202bdd1 100644
--- a/doc/README.mpc85xxads
+++ b/doc/README.mpc85xxads
@@ -100,6 +100,9 @@ Updated 13-July-2004 Jon Loeliger
SW7[1:4] = 0101 = 5 => 5 x 66 = 330 CCB Sysclk
SW7[5:6] = 01 => 5:2 x 330 = 825 Core clock
+ In order to use PCI-X (only in the first PCI slot. The one with
+ the RIO connector), you need to set SW1[4] (config) to 1 (off).
+ Also, configure the board to run PCI at 66 MHz.
2. MEMORY MAP TO WORK WITH LINUX KERNEL
diff --git a/drivers/pci_auto.c b/drivers/pci_auto.c
index 9e921b2148..969167555e 100644
--- a/drivers/pci_auto.c
+++ b/drivers/pci_auto.c
@@ -187,7 +187,7 @@ static void pciauto_prescan_setup_bridge(struct pci_controller *hose,
} else {
/* We don't support prefetchable memory for now, so disable */
pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE, 0x1000);
- pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT, 0x1000);
+ pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT, 0x0);
}
if (pci_io) {
diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h
index 2f10e9591d..7a4345a740 100644
--- a/include/asm-ppc/immap_85xx.h
+++ b/include/asm-ppc/immap_85xx.h
@@ -246,7 +246,6 @@ typedef struct ccsr_lbc {
/*
* PCI Registers(0x8000-0x9000)
- * Omitting Reserved(0x9000-0x2_0000)
*/
typedef struct ccsr_pcix {
uint cfg_addr; /* 0x8000 - PCIX Configuration Address Register */
@@ -309,9 +308,27 @@ typedef struct ccsr_pcix {
uint peextaddrcr; /* 0x8e14 - PCIX Error Extended Address Capture Register */
uint pedlcr; /* 0x8e18 - PCIX Error Data Low Capture Register */
uint pedhcr; /* 0x8e1c - PCIX Error Error Data High Capture Register */
- char res11[94688];
+ uint gas_timr; /* 0x8e20 - PCIX Gasket Timer Register */
+ char res11[476];
} ccsr_pcix_t;
+#define PCIX_COMMAND 0x62
+#define POWAR_EN 0x80000000
+#define POWAR_IO_READ 0x00080000
+#define POWAR_MEM_READ 0x00040000
+#define POWAR_IO_WRITE 0x00008000
+#define POWAR_MEM_WRITE 0x00004000
+#define POWAR_MEM_512M 0x0000001c
+#define POWAR_IO_1M 0x00000013
+
+#define PIWAR_EN 0x80000000
+#define PIWAR_PF 0x20000000
+#define PIWAR_LOCAL 0x00f00000
+#define PIWAR_READ_SNOOP 0x00050000
+#define PIWAR_WRITE_SNOOP 0x00005000
+#define PIWAR_MEM_2G 0x0000001e
+
+
/*
* L2 Cache Registers(0x2_0000-0x2_1000)
*/
@@ -1572,6 +1589,8 @@ typedef struct ccsr_gur {
char res15[61651];
} ccsr_gur_t;
+#define PORDEVSR_PCI (0x00800000) /* PCI Mode */
+
typedef struct immap {
ccsr_local_ecm_t im_local_ecm;
ccsr_ddr_t im_ddr;
@@ -1579,6 +1598,8 @@ typedef struct immap {
ccsr_duart_t im_duart;
ccsr_lbc_t im_lbc;
ccsr_pcix_t im_pcix;
+ ccsr_pcix_t im_pcix2;
+ char reserved[90112];
ccsr_l2cache_t im_l2cache;
ccsr_dma_t im_dma;
ccsr_tsec_t im_tsec1;
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index 131c832242..8e4d2c95a4 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -68,6 +68,10 @@
* The board, however, can run at 66MHz. In any event, this value
* must match the settings of some switches. Details can be found
* in the README.mpc85xxads.
+ *
+ * XXX -- Can't we run at 66 MHz, anyway? PCI should drop to
+ * 33MHz to accommodate, based on a PCI pin.
+ * Note that PCI-X won't work at 33MHz.
*/
#ifndef CONFIG_SYS_CLK_FREQ
@@ -293,6 +297,21 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE 1
+#define CONFIG_OF_BOARD_SETUP 1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE 8192
+
+#define OF_CPU "PowerPC,8540@0"
+#define OF_SOC "soc8540@e0000000"
+#define OF_TBCLK (bd->bi_busfreq / 8)
+#define OF_STDOUT_PATH "/soc8540@e0000000/serial@4500"
+
+#define CFG_64BIT_VSPRINTF 1
+#define CFG_64BIT_STRTOUL 1
+
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
@@ -312,9 +331,10 @@
#define CFG_PCI1_MEM_BASE 0x80000000
#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
-#define CFG_PCI1_IO_BASE 0xe2000000
-#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE
-#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */
+
+#define CFG_PCI1_IO_BASE 0x0
+#define CFG_PCI1_IO_PHYS 0xe2000000
+#define CFG_PCI1_IO_SIZE 0x100000 /* 1M */
#if defined(CONFIG_PCI)
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index c96b98b54d..f73caf0319 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -308,6 +308,18 @@ extern unsigned long get_clock_freq(void);
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE 1
+#define CONFIG_OF_BOARD_SETUP 1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE 8192
+
+#define OF_CPU "PowerPC,8541@0"
+#define OF_SOC "soc8541@e0000000"
+#define OF_TBCLK (bd->bi_busfreq / 8)
+#define OF_STDOUT_PATH "/soc8541@e0000000/serial@4600"
+
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
@@ -323,32 +335,27 @@ extern unsigned long get_clock_freq(void);
#define CFG_PCI1_MEM_BASE 0x80000000
#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
-#define CFG_PCI1_IO_BASE 0xe2000000
-#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE
-#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */
+#define CFG_PCI1_IO_BASE 0x00000000
+#define CFG_PCI1_IO_PHYS 0xe2000000
+#define CFG_PCI1_IO_SIZE 0x100000 /* 1M */
#define CFG_PCI2_MEM_BASE 0xa0000000
#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE
#define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */
-#define CFG_PCI2_IO_BASE 0xe3000000
-#define CFG_PCI2_IO_PHYS CFG_PCI2_IO_BASE
-#define CFG_PCI2_IO_SIZE 0x1000000 /* 16M */
+#define CFG_PCI2_IO_BASE 0x00000000
+#define CFG_PCI2_IO_PHYS 0xe2100000
+#define CFG_PCI2_IO_SIZE 0x100000 /* 1M */
#if defined(CONFIG_PCI)
+#define CONFIG_MPC85XX_PCI2
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
-#if !defined(CONFIG_PCI_PNP)
- #define PCI_ENET0_IOADDR 0xe0000000
- #define PCI_ENET0_MEMADDR 0xe0000000
- #define PCI_IDSEL_NUMBER 0x0c /*slot0->3(IDSEL)=12->15*/
-#endif
-
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 4ca8bc35db..37b518cca5 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -314,6 +314,18 @@ extern unsigned long get_clock_freq(void);
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE 1
+#define CONFIG_OF_BOARD_SETUP 1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE 8192
+
+#define OF_CPU "PowerPC,8548@0"
+#define OF_SOC "soc8548@e0000000"
+#define OF_TBCLK (bd->bi_busfreq / 8)
+#define OF_STDOUT_PATH "/soc8548@e0000000/serial@4600"
+
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
@@ -329,32 +341,27 @@ extern unsigned long get_clock_freq(void);
#define CFG_PCI1_MEM_BASE 0x80000000
#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
-#define CFG_PCI1_IO_BASE 0xe2000000
-#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE
-#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */
+#define CFG_PCI1_IO_BASE 0x00000000
+#define CFG_PCI1_IO_PHYS 0xe2000000
+#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */
#define CFG_PCI2_MEM_BASE 0xa0000000
#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE
#define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */
-#define CFG_PCI2_IO_BASE 0xe3000000
-#define CFG_PCI2_IO_PHYS CFG_PCI2_IO_BASE
-#define CFG_PCI2_IO_SIZE 0x1000000 /* 16M */
+#define CFG_PCI2_IO_BASE 0x00000000
+#define CFG_PCI2_IO_PHYS 0xe2100000
+#define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */
#if defined(CONFIG_PCI)
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#define CONFIG_85XX_PCI2
#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
-#if !defined(CONFIG_PCI_PNP)
- #define PCI_ENET0_IOADDR 0xe0000000
- #define PCI_ENET0_MEMADDR 0xe0000000
- #define PCI_IDSEL_NUMBER 0x0c /*slot0->3(IDSEL)=12->15*/
-#endif
-
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
@@ -374,7 +381,7 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_MPC85XX_TSEC2_NAME "eTSEC1"
#define CONFIG_MPC85XX_TSEC3 1
#define CONFIG_MPC85XX_TSEC3_NAME "eTSEC2"
-#define CONFIG_MPC85XX_TSEC4 1
+#undef CONFIG_MPC85XX_TSEC4
#define CONFIG_MPC85XX_TSEC4_NAME "eTSEC3"
#undef CONFIG_MPC85XX_FEC
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index a44e3ec845..b94e38ae34 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -308,6 +308,18 @@ extern unsigned long get_clock_freq(void);
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE 1
+#define CONFIG_OF_BOARD_SETUP 1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE 8192
+
+#define OF_CPU "PowerPC,8555@0"
+#define OF_SOC "soc8555@e0000000"
+#define OF_TBCLK (bd->bi_busfreq / 8)
+#define OF_STDOUT_PATH "/soc8555@e0000000/serial@4600"
+
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
@@ -323,33 +335,28 @@ extern unsigned long get_clock_freq(void);
#define CFG_PCI1_MEM_BASE 0x80000000
#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
-#define CFG_PCI1_IO_BASE 0xe2000000
-#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE
-#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */
+#define CFG_PCI1_IO_BASE 0x00000000
+#define CFG_PCI1_IO_PHYS 0xe2000000
+#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */
#define CFG_PCI2_MEM_BASE 0xa0000000
#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE
#define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */
-#define CFG_PCI2_IO_BASE 0xe3000000
-#define CFG_PCI2_IO_PHYS CFG_PCI2_IO_BASE
-#define CFG_PCI2_IO_SIZE 0x1000000 /* 16M */
+#define CFG_PCI2_IO_BASE 0x00000000
+#define CFG_PCI2_IO_PHYS 0xe2100000
+#define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */
#if defined(CONFIG_PCI)
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#define CONFIG_MPC85XX_PCI2
#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
-#if !defined(CONFIG_PCI_PNP)
- #define PCI_ENET0_IOADDR 0xe0000000
- #define PCI_ENET0_MEMADDR 0xe0000000
- #define PCI_IDSEL_NUMBER 0x0c /*slot0->3(IDSEL)=12->15*/
-#endif
-
-#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
#endif /* CONFIG_PCI */
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index 2d5031b77d..1c684f2fd1 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -290,6 +290,18 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE 1
+#define CONFIG_OF_BOARD_SETUP 1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE 8192
+
+#define OF_CPU "PowerPC,8560@0"
+#define OF_SOC "soc8560@e0000000"
+#define OF_TBCLK (bd->bi_busfreq / 8)
+#define OF_STDOUT_PATH "/soc8560@e0000000/serial@4500"
+
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
diff --git a/include/ft_build.h b/include/ft_build.h
index 5c5e06309b..f5156879de 100644
--- a/include/ft_build.h
+++ b/include/ft_build.h
@@ -36,19 +36,18 @@ struct boot_param_header {
struct ft_cxt {
struct boot_param_header *bph;
- int max_size; /* maximum size of tree */
- int overflow; /* set when this happens */
- u8 *p, *pstr, *pres; /* running pointers */
- u8 *p_begin, *pstr_begin, *pres_begin; /* starting pointers */
- u8 *p_anchor; /* start of constructed area */
- int struct_size, strings_size, res_size;
+ u8 *p_rsvmap;
+ u8 *p_start; /* pointer to beginning of dt_struct */
+ u8 *p_end; /* pointer to end of dt_strings */
+ u8 *p; /* pointer to end of dt_struct and beginning of dt_strings */
};
void ft_begin_node(struct ft_cxt *cxt, const char *name);
+void ft_init_cxt(struct ft_cxt *cxt, void *blob);
void ft_end_node(struct ft_cxt *cxt);
-void ft_begin_tree(struct ft_cxt *cxt);
-int ft_end_tree(struct ft_cxt *cxt);
+void ft_end_tree(struct ft_cxt *cxt);
+void ft_finalize_tree(struct ft_cxt *cxt);
void ft_nop(struct ft_cxt *cxt);
void ft_prop(struct ft_cxt *cxt, const char *name, const void *data, int sz);
@@ -57,14 +56,14 @@ void ft_prop_int(struct ft_cxt *cxt, const char *name, int val);
void ft_begin(struct ft_cxt *cxt, void *blob, int max_size);
void ft_add_rsvmap(struct ft_cxt *cxt, u64 physaddr, u64 size);
-void ft_setup(void *blob, int size, bd_t * bd, ulong initrd_start, ulong initrd_end);
-#ifdef CONFIG_OF_BOARD_SETUP
-void ft_board_setup(void *blob, bd_t *bd);
-#endif
+void ft_setup(void *blob, bd_t * bd, ulong initrd_start, ulong initrd_end);
+
void ft_dump_blob(const void *bphp);
void ft_merge_blob(struct ft_cxt *cxt, void *blob);
void *ft_get_prop(void *bphp, const char *propname, int *szp);
+#ifdef CONFIG_OF_BOARD_SETUP
void ft_board_setup(void *blob, bd_t *bd);
+#endif
#endif
diff --git a/include/pci.h b/include/pci.h
index 705d1fcd8a..e0e8783a7a 100644
--- a/include/pci.h
+++ b/include/pci.h
@@ -271,11 +271,14 @@
#define PCI_AGP_SIZEOF 12
/* PCI-X registers */
-#define PCI_X_CMD_DPERR_E 0x0001 /* Data Parity Error Recovery Enable */+#define PCI_X_CMD_ERO 0x0002 /* Enable Relaxed Ordering */
+
+#define PCI_X_CMD_DPERR_E 0x0001 /* Data Parity Error Recovery Enable */
+#define PCI_X_CMD_ERO 0x0002 /* Enable Relaxed Ordering */
#define PCI_X_CMD_MAX_READ 0x0000 /* Max Memory Read Byte Count */
#define PCI_X_CMD_MAX_SPLIT 0x0030 /* Max Outstanding Split Transactions */
#define PCI_X_CMD_VERSION(x) (((x) >> 12) & 3) /* Version */
+
/* Slot Identification */
#define PCI_SID_ESR 2 /* Expansion Slot Register */