diff options
Diffstat (limited to 'dts/Bindings/i2c')
| -rw-r--r-- | dts/Bindings/i2c/allwinner,sun6i-a31-p2wi.yaml | 6 | ||||
| -rw-r--r-- | dts/Bindings/i2c/amlogic,meson6-i2c.yaml | 53 | ||||
| -rw-r--r-- | dts/Bindings/i2c/i2c-aspeed.txt | 3 | ||||
| -rw-r--r-- | dts/Bindings/i2c/i2c-at91.txt | 9 | ||||
| -rw-r--r-- | dts/Bindings/i2c/i2c-meson.txt | 30 | ||||
| -rw-r--r-- | dts/Bindings/i2c/i2c-stm32.txt | 65 | ||||
| -rw-r--r-- | dts/Bindings/i2c/i2c.txt | 18 | ||||
| -rw-r--r-- | dts/Bindings/i2c/marvell,mv64xxx-i2c.yaml | 4 | ||||
| -rw-r--r-- | dts/Bindings/i2c/renesas,i2c.txt | 1 | ||||
| -rw-r--r-- | dts/Bindings/i2c/renesas,iic.txt | 1 | ||||
| -rw-r--r-- | dts/Bindings/i2c/st,stm32-i2c.yaml | 141 |
11 files changed, 225 insertions, 106 deletions
diff --git a/dts/Bindings/i2c/allwinner,sun6i-a31-p2wi.yaml b/dts/Bindings/i2c/allwinner,sun6i-a31-p2wi.yaml index f9d526b7da..6097e8ac46 100644 --- a/dts/Bindings/i2c/allwinner,sun6i-a31-p2wi.yaml +++ b/dts/Bindings/i2c/allwinner,sun6i-a31-p2wi.yaml @@ -8,7 +8,7 @@ title: Allwinner A31 P2WI (Push/Pull 2 Wires Interface) Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> allOf: - $ref: /schemas/i2c/i2c-controller.yaml# @@ -40,9 +40,7 @@ required: - clocks - resets -# FIXME: We should set it, but it would report all the generic -# properties as additional properties. -# additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/i2c/amlogic,meson6-i2c.yaml b/dts/Bindings/i2c/amlogic,meson6-i2c.yaml new file mode 100644 index 0000000000..49cad273c8 --- /dev/null +++ b/dts/Bindings/i2c/amlogic,meson6-i2c.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/i2c/amlogic,meson6-i2c.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic Meson I2C Controller + +maintainers: + - Neil Armstrong <narmstrong@baylibre.com> + - Beniamino Galvani <b.galvani@gmail.com> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + enum: + - amlogic,meson6-i2c # Meson6, Meson8 and compatible SoCs + - amlogic,meson-gxbb-i2c # GXBB and compatible SoCs + - amlogic,meson-axg-i2c # AXG and compatible SoCs + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +examples: + - | + i2c@c8100500 { + compatible = "amlogic,meson6-i2c"; + reg = <0xc8100500 0x20>; + interrupts = <92>; + clocks = <&clk81>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@52 { + compatible = "atmel,24c32"; + reg = <0x52>; + }; + }; diff --git a/dts/Bindings/i2c/i2c-aspeed.txt b/dts/Bindings/i2c/i2c-aspeed.txt index 8fbd8633a3..b47f6ccb19 100644 --- a/dts/Bindings/i2c/i2c-aspeed.txt +++ b/dts/Bindings/i2c/i2c-aspeed.txt @@ -1,4 +1,4 @@ -Device tree configuration for the I2C busses on the AST24XX and AST25XX SoCs. +Device tree configuration for the I2C busses on the AST24XX, AST25XX, and AST26XX SoCs. Required Properties: - #address-cells : should be 1 @@ -6,6 +6,7 @@ Required Properties: - reg : address offset and range of bus - compatible : should be "aspeed,ast2400-i2c-bus" or "aspeed,ast2500-i2c-bus" + or "aspeed,ast2600-i2c-bus" - clocks : root clock of bus, should reference the APB clock in the second cell - resets : phandle to reset controller with the reset number in diff --git a/dts/Bindings/i2c/i2c-at91.txt b/dts/Bindings/i2c/i2c-at91.txt index b7cec17c3d..8347b1e7c0 100644 --- a/dts/Bindings/i2c/i2c-at91.txt +++ b/dts/Bindings/i2c/i2c-at91.txt @@ -3,7 +3,8 @@ I2C for Atmel platforms Required properties : - compatible : Must be "atmel,at91rm9200-i2c", "atmel,at91sam9261-i2c", "atmel,at91sam9260-i2c", "atmel,at91sam9g20-i2c", "atmel,at91sam9g10-i2c", - "atmel,at91sam9x5-i2c", "atmel,sama5d4-i2c" or "atmel,sama5d2-i2c" + "atmel,at91sam9x5-i2c", "atmel,sama5d4-i2c", "atmel,sama5d2-i2c" or + "microchip,sam9x60-i2c" - reg: physical base address of the controller and length of memory mapped region. - interrupts: interrupt number to the cpu. @@ -17,8 +18,10 @@ Optional properties: - dma-names: should contain "tx" and "rx". - atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO capable I2C controllers. -- i2c-sda-hold-time-ns: TWD hold time, only available for "atmel,sama5d4-i2c" - and "atmel,sama5d2-i2c". +- i2c-sda-hold-time-ns: TWD hold time, only available for: + "atmel,sama5d4-i2c", + "atmel,sama5d2-i2c", + "microchip,sam9x60-i2c". - Child nodes conforming to i2c bus binding Examples : diff --git a/dts/Bindings/i2c/i2c-meson.txt b/dts/Bindings/i2c/i2c-meson.txt deleted file mode 100644 index 13d410de07..0000000000 --- a/dts/Bindings/i2c/i2c-meson.txt +++ /dev/null @@ -1,30 +0,0 @@ -Amlogic Meson I2C controller - -Required properties: - - compatible: must be: - "amlogic,meson6-i2c" for Meson8 and compatible SoCs - "amlogic,meson-gxbb-i2c" for GXBB and compatible SoCs - "amlogic,meson-axg-i2c"for AXG and compatible SoCs - - - reg: physical address and length of the device registers - - interrupts: a single interrupt specifier - - clocks: clock for the device - - #address-cells: should be <1> - - #size-cells: should be <0> - -For details regarding the following core I2C bindings see also i2c.txt. - -Optional properties: -- clock-frequency: the desired I2C bus clock frequency in Hz; in - absence of this property the default value is used (100 kHz). - -Examples: - - i2c@c8100500 { - compatible = "amlogic,meson6-i2c"; - reg = <0xc8100500 0x20>; - interrupts = <0 92 1>; - clocks = <&clk81>; - #address-cells = <1>; - #size-cells = <0>; - }; diff --git a/dts/Bindings/i2c/i2c-stm32.txt b/dts/Bindings/i2c/i2c-stm32.txt deleted file mode 100644 index ce3df2fff6..0000000000 --- a/dts/Bindings/i2c/i2c-stm32.txt +++ /dev/null @@ -1,65 +0,0 @@ -* I2C controller embedded in STMicroelectronics STM32 I2C platform - -Required properties: -- compatible: Must be one of the following - - "st,stm32f4-i2c" - - "st,stm32f7-i2c" -- reg: Offset and length of the register set for the device -- interrupts: Must contain the interrupt id for I2C event and then the - interrupt id for I2C error. -- resets: Must contain the phandle to the reset controller. -- clocks: Must contain the input clock of the I2C instance. -- A pinctrl state named "default" must be defined to set pins in mode of - operation for I2C transfer -- #address-cells = <1>; -- #size-cells = <0>; - -Optional properties: -- clock-frequency: Desired I2C bus clock frequency in Hz. If not specified, - the default 100 kHz frequency will be used. - For STM32F4 SoC Standard-mode and Fast-mode are supported, possible values are - 100000 and 400000. - For STM32F7, STM32H7 and STM32MP1 SoCs, Standard-mode, Fast-mode and Fast-mode - Plus are supported, possible values are 100000, 400000 and 1000000. -- dmas: List of phandles to rx and tx DMA channels. Refer to stm32-dma.txt. -- dma-names: List of dma names. Valid names are: "rx" and "tx". -- i2c-scl-rising-time-ns: I2C SCL Rising time for the board (default: 25) - For STM32F7, STM32H7 and STM32MP1 only. -- i2c-scl-falling-time-ns: I2C SCL Falling time for the board (default: 10) - For STM32F7, STM32H7 and STM32MP1 only. - I2C Timings are derived from these 2 values -- st,syscfg-fmp: Use to set Fast Mode Plus bit within SYSCFG when Fast Mode - Plus speed is selected by slave. - 1st cell: phandle to syscfg - 2nd cell: register offset within SYSCFG - 3rd cell: register bitmask for FMP bit - For STM32F7, STM32H7 and STM32MP1 only. - -Example: - - i2c@40005400 { - compatible = "st,stm32f4-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x40005400 0x400>; - interrupts = <31>, - <32>; - resets = <&rcc 277>; - clocks = <&rcc 0 149>; - pinctrl-0 = <&i2c1_sda_pin>, <&i2c1_scl_pin>; - pinctrl-names = "default"; - }; - - i2c@40005400 { - compatible = "st,stm32f7-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x40005400 0x400>; - interrupts = <31>, - <32>; - resets = <&rcc STM32F7_APB1_RESET(I2C1)>; - clocks = <&rcc 1 CLK_I2C1>; - pinctrl-0 = <&i2c1_sda_pin>, <&i2c1_scl_pin>; - pinctrl-names = "default"; - st,syscfg-fmp = <&syscfg 0x4 0x1>; - }; diff --git a/dts/Bindings/i2c/i2c.txt b/dts/Bindings/i2c/i2c.txt index 44efafdfd7..9a53df4243 100644 --- a/dts/Bindings/i2c/i2c.txt +++ b/dts/Bindings/i2c/i2c.txt @@ -55,6 +55,24 @@ wants to support one of the below features, it should adapt the bindings below. Number of nanoseconds the SDA signal takes to fall; t(f) in the I2C specification. +- i2c-analog-filter + Enable analog filter for i2c lines. + +- i2c-digital-filter + Enable digital filter for i2c lines. + +- i2c-digital-filter-width-ns + Width of spikes which can be filtered by digital filter + (i2c-digital-filter). This width is specified in nanoseconds. + +- i2c-analog-filter-cutoff-frequency + Frequency that the analog filter (i2c-analog-filter) uses to distinguish + which signal to filter. Signal with higher frequency than specified will + be filtered out. Only lower frequency will pass (this is applicable to + a low-pass analog filter). Typical value should be above the normal + i2c bus clock frequency (clock-frequency). + Specified in Hz. + - interrupts interrupts used by the device. diff --git a/dts/Bindings/i2c/marvell,mv64xxx-i2c.yaml b/dts/Bindings/i2c/marvell,mv64xxx-i2c.yaml index c779000515..2ceb05ba2d 100644 --- a/dts/Bindings/i2c/marvell,mv64xxx-i2c.yaml +++ b/dts/Bindings/i2c/marvell,mv64xxx-i2c.yaml @@ -93,9 +93,7 @@ allOf: required: - resets -# FIXME: We should set it, but it would report all the generic -# properties as additional properties. -# additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/i2c/renesas,i2c.txt b/dts/Bindings/i2c/renesas,i2c.txt index 3ee5e8f6ee..0660a3eb25 100644 --- a/dts/Bindings/i2c/renesas,i2c.txt +++ b/dts/Bindings/i2c/renesas,i2c.txt @@ -7,6 +7,7 @@ Required properties: "renesas,i2c-r8a7745" if the device is a part of a R8A7745 SoC. "renesas,i2c-r8a77470" if the device is a part of a R8A77470 SoC. "renesas,i2c-r8a774a1" if the device is a part of a R8A774A1 SoC. + "renesas,i2c-r8a774b1" if the device is a part of a R8A774B1 SoC. "renesas,i2c-r8a774c0" if the device is a part of a R8A774C0 SoC. "renesas,i2c-r8a7778" if the device is a part of a R8A7778 SoC. "renesas,i2c-r8a7779" if the device is a part of a R8A7779 SoC. diff --git a/dts/Bindings/i2c/renesas,iic.txt b/dts/Bindings/i2c/renesas,iic.txt index 202602e6e8..64d11ffb07 100644 --- a/dts/Bindings/i2c/renesas,iic.txt +++ b/dts/Bindings/i2c/renesas,iic.txt @@ -8,6 +8,7 @@ Required properties: - "renesas,iic-r8a7744" (RZ/G1N) - "renesas,iic-r8a7745" (RZ/G1E) - "renesas,iic-r8a774a1" (RZ/G2M) + - "renesas,iic-r8a774b1" (RZ/G2N) - "renesas,iic-r8a774c0" (RZ/G2E) - "renesas,iic-r8a7790" (R-Car H2) - "renesas,iic-r8a7791" (R-Car M2-W) diff --git a/dts/Bindings/i2c/st,stm32-i2c.yaml b/dts/Bindings/i2c/st,stm32-i2c.yaml new file mode 100644 index 0000000000..900ec1ab6a --- /dev/null +++ b/dts/Bindings/i2c/st,stm32-i2c.yaml @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/st,stm32-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: I2C controller embedded in STMicroelectronics STM32 I2C platform + +maintainers: + - Pierre-Yves MORDRET <pierre-yves.mordret@st.com> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + - if: + properties: + compatible: + contains: + enum: + - st,stm32f7-i2c + then: + properties: + i2c-scl-rising-time-ns: + default: 25 + + i2c-scl-falling-time-ns: + default: 10 + + st,syscfg-fmp: + description: Use to set Fast Mode Plus bit within SYSCFG when + Fast Mode Plus speed is selected by slave. + Format is phandle to syscfg / register offset within + syscfg / register bitmask for FMP bit. + allOf: + - $ref: "/schemas/types.yaml#/definitions/phandle-array" + - items: + minItems: 3 + maxItems: 3 + + - if: + properties: + compatible: + contains: + enum: + - st,stm32f4-i2c + then: + properties: + clock-frequency: + enum: [100000, 400000] + +properties: + compatible: + enum: + - st,stm32f4-i2c + - st,stm32f7-i2c + + reg: + maxItems: 1 + + interrupts: + items: + - description: interrupt ID for I2C event + - description: interrupt ID for I2C error + + resets: + maxItems: 1 + + clocks: + maxItems: 1 + + dmas: + items: + - description: RX DMA Channel phandle + - description: TX DMA Channel phandle + + dma-names: + items: + - const: rx + - const: tx + + clock-frequency: + description: Desired I2C bus clock frequency in Hz. If not specified, + the default 100 kHz frequency will be used. + For STM32F7, STM32H7 and STM32MP1 SoCs, Standard-mode, + Fast-mode and Fast-mode Plus are supported, possible + values are 100000, 400000 and 1000000. + default: 100000 + enum: [100000, 400000, 1000000] + +required: + - compatible + - reg + - interrupts + - resets + - clocks + +examples: + - | + #include <dt-bindings/mfd/stm32f7-rcc.h> + #include <dt-bindings/clock/stm32fx-clock.h> + //Example 1 (with st,stm32f4-i2c compatible) + i2c@40005400 { + compatible = "st,stm32f4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x40005400 0x400>; + interrupts = <31>, + <32>; + resets = <&rcc 277>; + clocks = <&rcc 0 149>; + }; + + //Example 2 (with st,stm32f7-i2c compatible) + i2c@40005800 { + compatible = "st,stm32f7-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x40005800 0x400>; + interrupts = <31>, + <32>; + resets = <&rcc STM32F7_APB1_RESET(I2C1)>; + clocks = <&rcc 1 CLK_I2C1>; + }; + + //Example 3 (with st,stm32f7-i2c compatible on stm32mp) + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + #include <dt-bindings/reset/stm32mp1-resets.h> + i2c@40013000 { + compatible = "st,stm32f7-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x40013000 0x400>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc I2C2_K>; + resets = <&rcc I2C2_R>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + st,syscfg-fmp = <&syscfg 0x4 0x2>; + }; +... |