diff options
Diffstat (limited to 'dts/Bindings/mfd/da9063.txt')
-rw-r--r-- | dts/Bindings/mfd/da9063.txt | 114 |
1 files changed, 0 insertions, 114 deletions
diff --git a/dts/Bindings/mfd/da9063.txt b/dts/Bindings/mfd/da9063.txt deleted file mode 100644 index aa8b800cc4..0000000000 --- a/dts/Bindings/mfd/da9063.txt +++ /dev/null @@ -1,114 +0,0 @@ -* Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC) - -DA9063 consists of a large and varied group of sub-devices (I2C Only): - -Device Supply Names Description ------- ------------ ----------- -da9063-regulator : : LDOs & BUCKs -da9063-onkey : : On Key -da9063-rtc : : Real-Time Clock (DA9063 only) -da9063-watchdog : : Watchdog - -====== - -Required properties: - -- compatible : Should be "dlg,da9063" or "dlg,da9063l" -- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be - modified to match the chip's OTP settings). -- interrupts : IRQ line information. -- interrupt-controller - -Sub-nodes: - -- regulators : This node defines the settings for the LDOs and BUCKs. - The DA9063(L) regulators are bound using their names listed below: - - bcore1 : BUCK CORE1 - bcore2 : BUCK CORE2 - bpro : BUCK PRO - bmem : BUCK MEM - bio : BUCK IO - bperi : BUCK PERI - ldo1 : LDO_1 (DA9063 only) - ldo2 : LDO_2 (DA9063 only) - ldo3 : LDO_3 - ldo4 : LDO_4 (DA9063 only) - ldo5 : LDO_5 (DA9063 only) - ldo6 : LDO_6 (DA9063 only) - ldo7 : LDO_7 - ldo8 : LDO_8 - ldo9 : LDO_9 - ldo10 : LDO_10 (DA9063 only) - ldo11 : LDO_11 - - The component follows the standard regulator framework and the bindings - details of individual regulator device can be found in: - Documentation/devicetree/bindings/regulator/regulator.txt - -- rtc : This node defines settings for the Real-Time Clock associated with - the DA9063 only. The RTC is not present in DA9063L. There are currently - no entries in this binding, however compatible = "dlg,da9063-rtc" should - be added if a node is created. - -- onkey : This node defines the OnKey settings for controlling the key - functionality of the device. The node should contain the compatible property - with the value "dlg,da9063-onkey". - - Optional onkey properties: - - - dlg,disable-key-power : Disable power-down using a long key-press. If this - entry exists the OnKey driver will remove support for the KEY_POWER key - press. If this entry does not exist then by default the key-press - triggered power down is enabled and the OnKey will support both KEY_POWER - and KEY_SLEEP. - -- watchdog : This node defines settings for the Watchdog timer associated - with the DA9063 and DA9063L. The node should contain the compatible property - with the value "dlg,da9063-watchdog". - - Optional watchdog properties: - - dlg,use-sw-pm: Add this property to disable the watchdog during suspend. - Only use this option if you can't use the watchdog automatic suspend - function during a suspend (see register CONTROL_B). - -Example: - - pmic0: da9063@58 { - compatible = "dlg,da9063" - reg = <0x58>; - interrupt-parent = <&gpio6>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - - rtc { - compatible = "dlg,da9063-rtc"; - }; - - wdt { - compatible = "dlg,da9063-watchdog"; - }; - - onkey { - compatible = "dlg,da9063-onkey"; - dlg,disable-key-power; - }; - - regulators { - DA9063_BCORE1: bcore1 { - regulator-name = "BCORE1"; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <500000>; - regulator-max-microamp = <2000000>; - regulator-boot-on; - }; - DA9063_LDO11: ldo11 { - regulator-name = "LDO_11"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <3600000>; - regulator-boot-on; - }; - }; - }; - |