diff options
Diffstat (limited to 'include/linux/usb/usb_defs.h')
-rw-r--r-- | include/linux/usb/usb_defs.h | 150 |
1 files changed, 150 insertions, 0 deletions
diff --git a/include/linux/usb/usb_defs.h b/include/linux/usb/usb_defs.h new file mode 100644 index 0000000000..731bc51c76 --- /dev/null +++ b/include/linux/usb/usb_defs.h @@ -0,0 +1,150 @@ +/* + * (C) Copyright 2001 + * Denis Peter, MPL AG Switzerland + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * Note: Part of this code has been derived from linux + * + */ +#ifndef _USB_DEFS_H_ +#define _USB_DEFS_H_ + +/* USB constants */ + +/* some HID sub classes */ +#define USB_SUB_HID_NONE 0 +#define USB_SUB_HID_BOOT 1 + +/* some UID Protocols */ +#define USB_PROT_HID_NONE 0 +#define USB_PROT_HID_KEYBOARD 1 +#define USB_PROT_HID_MOUSE 2 + + +/* Sub STORAGE Classes */ +#define US_SC_RBC 1 /* Typically, flash devices */ +#define US_SC_8020 2 /* CD-ROM */ +#define US_SC_QIC 3 /* QIC-157 Tapes */ +#define US_SC_UFI 4 /* Floppy */ +#define US_SC_8070 5 /* Removable media */ +#define US_SC_SCSI 6 /* Transparent */ +#define US_SC_MIN US_SC_RBC +#define US_SC_MAX US_SC_SCSI + +/* STORAGE Protocols */ +#define US_PR_CB 1 /* Control/Bulk w/o interrupt */ +#define US_PR_CBI 0 /* Control/Bulk/Interrupt */ +#define US_PR_BULK 0x50 /* bulk only */ + +/* Descriptor types */ +#define USB_DT_HID (USB_TYPE_CLASS | 0x01) +#define USB_DT_REPORT (USB_TYPE_CLASS | 0x02) +#define USB_DT_PHYSICAL (USB_TYPE_CLASS | 0x03) + +/* Descriptor sizes per descriptor type */ +#define USB_DT_HID_SIZE 9 + +/* USB Packet IDs (PIDs) */ +#define USB_PID_UNDEF_0 0xf0 +#define USB_PID_OUT 0xe1 +#define USB_PID_ACK 0xd2 +#define USB_PID_DATA0 0xc3 +#define USB_PID_UNDEF_4 0xb4 +#define USB_PID_SOF 0xa5 +#define USB_PID_UNDEF_6 0x96 +#define USB_PID_UNDEF_7 0x87 +#define USB_PID_UNDEF_8 0x78 +#define USB_PID_IN 0x69 +#define USB_PID_NAK 0x5a +#define USB_PID_DATA1 0x4b +#define USB_PID_PREAMBLE 0x3c +#define USB_PID_SETUP 0x2d +#define USB_PID_STALL 0x1e +#define USB_PID_UNDEF_F 0x0f + +/* HID requests */ +#define USB_REQ_GET_REPORT 0x01 +#define USB_REQ_GET_IDLE 0x02 +#define USB_REQ_GET_PROTOCOL 0x03 +#define USB_REQ_SET_REPORT 0x09 +#define USB_REQ_SET_IDLE 0x0A +#define USB_REQ_SET_PROTOCOL 0x0B + + +/* "pipe" definitions */ + +#define PIPE_ISOCHRONOUS 0 +#define PIPE_INTERRUPT 1 +#define PIPE_CONTROL 2 +#define PIPE_BULK 3 +#define PIPE_DEVEP_MASK 0x0007ff00 + +#define USB_ISOCHRONOUS 0 +#define USB_INTERRUPT 1 +#define USB_CONTROL 2 +#define USB_BULK 3 + +/* USB-status codes: */ +#define USB_ST_ACTIVE 0x1 /* TD is active */ +#define USB_ST_STALLED 0x2 /* TD is stalled */ +#define USB_ST_BUF_ERR 0x4 /* buffer error */ +#define USB_ST_BABBLE_DET 0x8 /* Babble detected */ +#define USB_ST_NAK_REC 0x10 /* NAK Received*/ +#define USB_ST_CRC_ERR 0x20 /* CRC/timeout Error */ +#define USB_ST_BIT_ERR 0x40 /* Bitstuff error */ +#define USB_ST_NOT_PROC 0x80000000L /* Not yet processed */ + + +/************************************************************************* + * Hub defines + */ + +/* + * Port feature numbers + */ +#define USB_PORT_FEAT_HIGHSPEED 10 + +/* wPortStatus bits */ +#define USB_PORT_STAT_SPEED \ + (USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED) + +/* (shifted) direction/type/recipient from the USB 2.0 spec, table 9.2 */ +#define DeviceRequest \ + ((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE) << 8) + +#define DeviceOutRequest \ + ((USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE) << 8) + +#define InterfaceRequest \ + ((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8) + +#define EndpointRequest \ + ((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8) + +#define EndpointOutRequest \ + ((USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8) + +/* class requests from the USB 2.0 hub spec, table 11-15 */ +/* GetBusState and SetHubDescriptor are optional, omitted */ +#define ClearHubFeature (0x2000 | USB_REQ_CLEAR_FEATURE) +#define ClearPortFeature (0x2300 | USB_REQ_CLEAR_FEATURE) +#define GetHubDescriptor (0xa000 | USB_REQ_GET_DESCRIPTOR) +#define GetHubStatus (0xa000 | USB_REQ_GET_STATUS) +#define GetPortStatus (0xa300 | USB_REQ_GET_STATUS) +#define SetHubFeature (0x2000 | USB_REQ_SET_FEATURE) +#define SetPortFeature (0x2300 | USB_REQ_SET_FEATURE) + +#define USB_PORT_STAT_SUPER_SPEED 0x0600 /* faking support to XHCI */ +#define USB_PORT_STAT_SPEED_MASK (USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED) + +#endif /*_USB_DEFS_H_ */ |