path: root/drivers/net/phy/mv88e6xxx/port.c

#include <common.h>
#include <init.h>

#include <linux/bitfield.h>
#include <linux/marvell_phy.h>

#include "port.h"

int mv88e6xxx_port_read(struct mv88e6xxx_chip *chip, int port, int reg,
			u16 *val)
{
	int addr = chip->info->port_base_addr + port;

	return mv88e6xxx_read(chip, addr, reg, val);
}

int mv88e6xxx_port_write(struct mv88e6xxx_chip *chip, int port, int reg,
			 u16 val)
{
	int addr = chip->info->port_base_addr + port;

	return mv88e6xxx_write(chip, addr, reg, val);
}

/* Offset 0x00: MAC (or PCS or Physical) Status Register
 *
 * For most devices, this is read only. However the 6185 has the MyPause
 * bit read/write.
 */
int mv88e6185_port_set_pause(struct mv88e6xxx_chip *chip, int port,
			     int pause)
{
	u16 reg;
	int err;

	err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_STS, &reg);
	if (err)
		return err;

	if (pause)
		reg |= MV88E6XXX_PORT_STS_MY_PAUSE;
	else
		reg &= ~MV88E6XXX_PORT_STS_MY_PAUSE;

	return mv88e6xxx_port_write(chip, port, MV88E6XXX_PORT_STS, reg);
}

/* Offset 0x01: MAC (or PCS or Physical) Control Register
 *
 * Link, Duplex and Flow Control have one force bit, one value bit.
 *
 * For port's MAC speed, ForceSpd (or SpdValue) bits 1:0 program the value.
 * Alternative values require the 200BASE (or AltSpeed) bit 12 set.
 * Newer chips need a ForcedSpd bit 13 set to consider the value.
 */

static int mv88e6xxx_port_set_rgmii_delay(struct mv88e6xxx_chip *chip, int port,
					  phy_interface_t mode)
{
	u16 reg;
	int err;

	err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_MAC_CTL, &reg);
	if (err)
		return err;

	reg &= ~(MV88E6XXX_PORT_MAC_CTL_RGMII_DELAY_RXCLK |
		 MV88E6XXX_PORT_MAC_CTL_RGMII_DELAY_TXCLK);

	switch (mode) {
	case PHY_INTERFACE_MODE_RGMII_RXID:
		reg |= MV88E6XXX_PORT_MAC_CTL_RGMII_DELAY_RXCLK;
		break;
	case PHY_INTERFACE_MODE_RGMII_TXID:
		reg |= MV88E6XXX_PORT_MAC_CTL_RGMII_DELAY_TXCLK;
		break;
	case PHY_INTERFACE_MODE_RGMII_ID:
		reg |= MV88E6XXX_PORT_MAC_CTL_RGMII_DELAY_RXCLK |
			MV88E6XXX_PORT_MAC_CTL_RGMII_DELAY_TXCLK;
		break;
	case PHY_INTERFACE_MODE_RGMII:
		break;
	default:
		return 0;
	}

	err = mv88e6xxx_port_write(chip, port, MV88E6XXX_PORT_MAC_CTL, reg);
	if (err)
		return err;

	dev_dbg(chip->dev, "p%d: delay RXCLK %s, TXCLK %s\n", port,
		reg & MV88E6XXX_PORT_MAC_CTL_RGMII_DELAY_RXCLK ? "yes" : "no",
		reg & MV88E6XXX_PORT_MAC_CTL_RGMII_DELAY_TXCLK ? "yes" : "no");

	return 0;
}

int mv88e6352_port_set_rgmii_delay(struct mv88e6xxx_chip *chip, int port,
				   phy_interface_t mode)
{
	if (port < 5)
		return -EOPNOTSUPP;

	return mv88e6xxx_port_set_rgmii_delay(chip, port, mode);
}

int mv88e6390_port_set_rgmii_delay(struct mv88e6xxx_chip *chip, int port,
				   phy_interface_t mode)
{
	if (port != 0)
		return -EOPNOTSUPP;

	return mv88e6xxx_port_set_rgmii_delay(chip, port, mode);
}

int mv88e6xxx_port_set_link(struct mv88e6xxx_chip *chip, int port, int link)
{
	u16 reg;
	int err;

	err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_MAC_CTL, &reg);
	if (err)
		return err;

	reg &= ~(MV88E6XXX_PORT_MAC_CTL_FORCE_LINK |
		 MV88E6XXX_PORT_MAC_CTL_LINK_UP);

	switch (link) {
	case LINK_FORCED_DOWN:
		reg |= MV88E6XXX_PORT_MAC_CTL_FORCE_LINK;
		break;
	case LINK_FORCED_UP:
		reg |= MV88E6XXX_PORT_MAC_CTL_FORCE_LINK |
			MV88E6XXX_PORT_MAC_CTL_LINK_UP;
		break;
	case LINK_UNFORCED:
		/* normal link detection */
		break;
	default:
		return -EINVAL;
	}

	err = mv88e6xxx_port_write(chip, port, MV88E6XXX_PORT_MAC_CTL, reg);
	if (err)
		return err;

	dev_dbg(chip->dev, "p%d: %s link %s\n", port,
		reg & MV88E6XXX_PORT_MAC_CTL_FORCE_LINK ? "Force" : "Unforce",
		reg & MV88E6XXX_PORT_MAC_CTL_LINK_UP ? "up" : "down");

	return 0;
}

int mv88e6xxx_port_set_duplex(struct mv88e6xxx_chip *chip, int port, int dup)
{
	u16 reg;
	int err;

	err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_MAC_CTL, &reg);
	if (err)
		return err;

	reg &= ~(MV88E6XXX_PORT_MAC_CTL_FORCE_DUPLEX |
		 MV88E6XXX_PORT_MAC_CTL_DUPLEX_FULL);

	switch (dup) {
	case DUPLEX_HALF:
		reg |= MV88E6XXX_PORT_MAC_CTL_FORCE_DUPLEX;
		break;
	case DUPLEX_FULL:
		reg |= MV88E6XXX_PORT_MAC_CTL_FORCE_DUPLEX |
			MV88E6XXX_PORT_MAC_CTL_DUPLEX_FULL;
		break;
	case DUPLEX_UNFORCED:
		/* normal duplex detection */
		break;
	default:
		return -EINVAL;
	}

	err = mv88e6xxx_port_write(chip, port, MV88E6XXX_PORT_MAC_CTL, reg);
	if (err)
		return err;

	dev_dbg(chip->dev, "p%d: %s %s duplex\n", port,
		reg & MV88E6XXX_PORT_MAC_CTL_FORCE_DUPLEX ? "Force" : "Unforce",
		reg & MV88E6XXX_PORT_MAC_CTL_DUPLEX_FULL ? "full" : "half");

	return 0;
}

static int mv88e6xxx_port_set_speed(struct mv88e6xxx_chip *chip, int port,
				    int speed, bool alt_bit, bool force_bit)
{
	u16 reg, ctrl;
	int err;

	switch (speed) {
	case 10:
		ctrl = MV88E6XXX_PORT_MAC_CTL_SPEED_10;
		break;
	case 100:
		ctrl = MV88E6XXX_PORT_MAC_CTL_SPEED_100;
		break;
	case 200:
		if (alt_bit)
			ctrl = MV88E6XXX_PORT_MAC_CTL_SPEED_100 |
				MV88E6390_PORT_MAC_CTL_ALTSPEED;
		else
			ctrl = MV88E6065_PORT_MAC_CTL_SPEED_200;
		break;
	case 1000:
		ctrl = MV88E6XXX_PORT_MAC_CTL_SPEED_1000;
		break;
	case 2500:
		ctrl = MV88E6390_PORT_MAC_CTL_SPEED_10000 |
			MV88E6390_PORT_MAC_CTL_ALTSPEED;
		break;
	case 10000:
		/* all bits set, fall through... */
	case SPEED_UNFORCED:
		ctrl = MV88E6XXX_PORT_MAC_CTL_SPEED_UNFORCED;
		break;
	default:
		return -EOPNOTSUPP;
	}

	err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_MAC_CTL, &reg);
	if (err)
		return err;

	reg &= ~MV88E6XXX_PORT_MAC_CTL_SPEED_MASK;
	if (alt_bit)
		reg &= ~MV88E6390_PORT_MAC_CTL_ALTSPEED;
	if (force_bit) {
		reg &= ~MV88E6390_PORT_MAC_CTL_FORCE_SPEED;
		if (speed != SPEED_UNFORCED)
			ctrl |= MV88E6390_PORT_MAC_CTL_FORCE_SPEED;
	}
	reg |= ctrl;

	err = mv88e6xxx_port_write(chip, port, MV88E6XXX_PORT_MAC_CTL, reg);
	if (err)
		return err;

	if (speed)
		dev_dbg(chip->dev, "p%d: Speed set to %d Mbps\n", port, speed);
	else
		dev_dbg(chip->dev, "p%d: Speed unforced\n", port);

	return 0;
}

/* Support 10, 100, 200 Mbps (e.g. 88E6065 family) */
int mv88e6065_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed)
{
	if (speed == SPEED_MAX)
		speed = 200;

	if (speed > 200)
		return -EOPNOTSUPP;

	/* Setting 200 Mbps on port 0 to 3 selects 100 Mbps */
	return mv88e6xxx_port_set_speed(chip, port, speed, false, false);
}

/* Support 10, 100, 1000 Mbps (e.g. 88E6185 family) */
int mv88e6185_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed)
{
	if (speed == SPEED_MAX)
		speed = 1000;

	if (speed == 200 || speed > 1000)
		return -EOPNOTSUPP;

	return mv88e6xxx_port_set_speed(chip, port, speed, false, false);
}

/* Support 10, 100, 200, 1000 Mbps (e.g. 88E6352 family) */
int mv88e6352_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed)
{
	if (speed == SPEED_MAX)
		speed = 1000;

	if (speed > 1000)
		return -EOPNOTSUPP;

	if (speed == 200 && port < 5)
		return -EOPNOTSUPP;

	return mv88e6xxx_port_set_speed(chip, port, speed, true, false);
}

/* Support 10, 100, 200, 1000, 2500 Mbps (e.g. 88E6390) */
int mv88e6390_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed)
{
	if (speed == SPEED_MAX)
		speed = port < 9 ? 1000 : 2500;

	if (speed > 2500)
		return -EOPNOTSUPP;

	if (speed == 200 && port != 0)
		return -EOPNOTSUPP;

	if (speed == 2500 && port < 9)
		return -EOPNOTSUPP;

	return mv88e6xxx_port_set_speed(chip, port, speed, true, true);
}

/* Support 10, 100, 200, 1000, 2500, 10000 Mbps (e.g. 88E6190X) */
int mv88e6390x_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed)
{
	if (speed == SPEED_MAX)
		speed = port < 9 ? 1000 : 10000;

	if (speed == 200 && port != 0)
		return -EOPNOTSUPP;

	if (speed >= 2500 && port < 9)
		return -EOPNOTSUPP;

	return mv88e6xxx_port_set_speed(chip, port, speed, true, true);
}

int mv88e6390x_port_set_cmode(struct mv88e6xxx_chip *chip, int port,
			      phy_interface_t mode)
{
	u16 cmode;

	if (mode == PHY_INTERFACE_MODE_NA)
		return 0;

	if (port != 9 && port != 10)
		return -EOPNOTSUPP;

	switch (mode) {
	case PHY_INTERFACE_MODE_1000BASEX:
		cmode = MV88E6XXX_PORT_STS_CMODE_1000BASE_X;
		break;
	case PHY_INTERFACE_MODE_SGMII:
		cmode = MV88E6XXX_PORT_STS_CMODE_SGMII;
		break;
	case PHY_INTERFACE_MODE_2500BASEX:
		cmode = MV88E6XXX_PORT_STS_CMODE_2500BASEX;
		break;
	case PHY_INTERFACE_MODE_XGMII:
	case PHY_INTERFACE_MODE_XAUI:
		cmode = MV88E6XXX_PORT_STS_CMODE_XAUI;
		break;
	case PHY_INTERFACE_MODE_RXAUI:
		cmode = MV88E6XXX_PORT_STS_CMODE_RXAUI;
		break;
	default:
		cmode = 0;
	}

	chip->ports[port].cmode = cmode;

	return 0;
}

int mv88e6352_port_link_state(struct mv88e6xxx_chip *chip, int port,
			      struct phylink_link_state *state)
{
	int err;
	u16 reg;

	err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_STS, &reg);
	if (err)
		return err;

	switch (reg & MV88E6XXX_PORT_STS_SPEED_MASK) {
	case MV88E6XXX_PORT_STS_SPEED_10:
		state->speed = SPEED_10;
		break;
	case MV88E6XXX_PORT_STS_SPEED_100:
		state->speed = SPEED_100;
		break;
	case MV88E6XXX_PORT_STS_SPEED_1000:
		state->speed = SPEED_1000;
		break;
	case MV88E6XXX_PORT_STS_SPEED_10000:
		if ((reg & MV88E6XXX_PORT_STS_CMODE_MASK) ==
		    MV88E6XXX_PORT_STS_CMODE_2500BASEX)
			state->speed = SPEED_2500;
		else
			state->speed = SPEED_10000;
		break;
	}

	state->duplex = reg & MV88E6XXX_PORT_STS_DUPLEX ?
			DUPLEX_FULL : DUPLEX_HALF;
	state->link = !!(reg & MV88E6XXX_PORT_STS_LINK);
	state->an_enabled = 1;
	state->an_complete = state->link;

	return 0;
}

int mv88e6185_port_link_state(struct mv88e6xxx_chip *chip, int port,
			      struct phylink_link_state *state)
{
	if (state->interface == PHY_INTERFACE_MODE_1000BASEX) {
		u8 cmode = chip->ports[port].cmode;

		/* When a port is in "Cross-chip serdes" mode, it uses
		 * 1000Base-X full duplex mode, but there is no automatic
		 * link detection. Use the sync OK status for link (as it
		 * would do for 1000Base-X mode.)
		 */
		if (cmode == MV88E6185_PORT_STS_CMODE_SERDES) {
			u16 mac;
			int err;

			err = mv88e6xxx_port_read(chip, port,
						  MV88E6XXX_PORT_MAC_CTL, &mac);
			if (err)
				return err;

			state->link = !!(mac & MV88E6185_PORT_MAC_CTL_SYNC_OK);
			state->an_enabled = 1;
			state->an_complete =
				!!(mac & MV88E6185_PORT_MAC_CTL_AN_DONE);
			state->duplex =
				state->link ? DUPLEX_FULL : DUPLEX_UNKNOWN;
			state->speed =
				state->link ? SPEED_1000 : SPEED_UNKNOWN;

			return 0;
		}
	}

	return mv88e6352_port_link_state(chip, port, state);
}


static int mv88e6xxx_port_setup_mac(struct mv88e6xxx_chip *chip, int port,
				    int link, int speed, int duplex, int pause,
				    phy_interface_t mode)
{
	int err;

	if (!chip->info->ops->port_set_link)
		return 0;

	/* Port's MAC control must not be changed unless the link is down */
	err = chip->info->ops->port_set_link(chip, port, 0);
	if (err)
		return err;

	if (chip->info->ops->port_set_speed) {
		err = chip->info->ops->port_set_speed(chip, port, speed);
		if (err && err != -EOPNOTSUPP)
			goto restore_link;
	}

	if (chip->info->ops->port_set_pause) {
		err = chip->info->ops->port_set_pause(chip, port, pause);
		if (err)
			goto restore_link;

	}

	if (chip->info->ops->port_set_duplex) {
		err = chip->info->ops->port_set_duplex(chip, port, duplex);
		if (err && err != -EOPNOTSUPP)
			goto restore_link;
	}

	if (chip->info->ops->port_set_rgmii_delay) {
		err = chip->info->ops->port_set_rgmii_delay(chip, port, mode);
		if (err && err != -EOPNOTSUPP)
			goto restore_link;
	}

	if (chip->info->ops->port_set_cmode) {
		err = chip->info->ops->port_set_cmode(chip, port, mode);
		if (err && err != -EOPNOTSUPP)
			goto restore_link;
	}

	err = 0;
restore_link:
	if (chip->info->ops->port_set_link(chip, port, link))
		dev_err(chip->dev, "p%d: failed to restore MAC's link\n", port);

	return err;
}

static int mv88e6xxx_port_config_init(struct phy_device *phydev)
{
	struct mv88e6xxx_chip *chip = phydev->dev.priv;
	int port = phydev->addr - chip->info->port_base_addr;
	int err;

	err = mv88e6xxx_port_setup_mac(chip, port, phydev->link, phydev->speed,
				       phydev->duplex, phydev->pause,
				       phydev->interface);

	if (err && err != -EOPNOTSUPP)
		dev_err(&phydev->dev, "p%d: failed to configure MAC\n", port);

	return err;
}

static int mv88e6xxx_port_config_aneg(struct phy_device *phydev)
{
	return 0;
}

static int mv88e6xxx_port_read_status(struct phy_device *phydev)
{
	struct mv88e6xxx_chip *chip = phydev->dev.priv;
	int port = phydev->addr - chip->info->port_base_addr;
	struct phylink_link_state state;
	int err;

	err = mv88e6352_port_link_state(chip, port, &state);
	if (err)
		return err;

	phydev->link = state.link;
	phydev->duplex = state.duplex;
	phydev->speed = state.speed;

	phydev->pause = phydev->asym_pause = 0;

 	return 0;
}

/*
 * Fake switch PHY_ID used to match this driver against devices
 * create in mv88e6xxx_port_probe.
 */
#define MV88E6XXX_SWITCH_PORT_PHY_ID (0x01410000 | \
				      MV88E6XXX_PORT_SWITCH_ID_PROD_6085)

static struct phy_driver mv88e6xxx_port_driver = {
	.phy_id         = MV88E6XXX_SWITCH_PORT_PHY_ID,
	.phy_id_mask    = MARVELL_PHY_ID_MASK,
	.drv.name	= "Marvel 88E6xxx Port",
	.features	= PHY_GBIT_FEATURES & ~SUPPORTED_Autoneg,
	.config_init	= mv88e6xxx_port_config_init,
	.config_aneg	= mv88e6xxx_port_config_aneg,
	.read_status	= mv88e6xxx_port_read_status,
};

device_phy_driver(mv88e6xxx_port_driver);

int mv88e6xxx_port_probe(struct mv88e6xxx_chip *chip)
{
	struct device_d *dev = chip->dev;
	struct device_node *np = dev->device_node;
	struct device_node *port_node, *switch_node;
	struct device_node *port_nodes[DSA_MAX_PORTS] = { NULL };
	int err, i;

	switch_node = of_find_node_by_name(np, "ports");
	if (!switch_node)
		return -EINVAL;

 	for_each_available_child_of_node(switch_node, port_node) {
		u32 nr;

 		err = of_property_read_u32(port_node, "reg", &nr);
		if (err) {
			dev_err(dev,
				"Error: Failed to find reg for child %s\n",
				port_node->full_name);
			continue;
		}

		port_nodes[nr] = port_node;
	}

	/*
	 * Walk through all of the ports and unmask those that are
	 * connected to a PHY via child MDIO bus, so the can be picked
	 * up via regular PHY discover.
	 *
	 * While at it, also create PHY objects for ports that are
	 * not, so they can be correctly configured
	 */
	for (i = 0; i < chip->info->num_ports; i++) {
		struct phy_device *phydev;
		u16 status;
		bool force_mac = false;
		int addr = i;

		err = mv88e6xxx_port_read(chip, i, MV88E6XXX_PORT_STS,
					  &status);
		if (err)
			return err;

		/*
		 * FIXME: This most likely affects more than 6161, so
		 * this will have to be expanded to more chips
		 */
		if (chip->info->prod_num ==
		    MV88E6XXX_PORT_SWITCH_ID_PROD_6161) {
			const uint8_t cmode =
				FIELD_GET(MV88E6185_PORT_STS_CMODE_MASK,
					  status);
			switch (i) {
			case 4:
			case 5:	/* FALLTHROUGH */
				if (cmode == MV88E6165_PORT_STS_CMODE_SGMII) {
					/*
					 * Port is configured to SGMII
					 * bypassing SERDES/PHY
					 */
					force_mac = true;
					break;
				}

				if (cmode != MV88E6165_PORT_STS_CMODE_PHY) {
					/*
					 * If port is configured to
					 * SERDES we need to adjust
					 * its MDIO address
					 */
					addr += MV88E6165_PORT_SERDES_OFFSET;
				}

				break;
			}
		}

		if (status & MV88E6XXX_PORT_STS_PHY_DETECT && !force_mac) {
			/*
			 * True PHYs will be automaticall handled by
			 * generic PHY driver, so we ignore those.
			 */
			chip->miibus.phy_mask &= ~BIT(addr);
			continue;
		}

		/*
		 * In order to expose MAC-only ports on the switch, so
		 * they can be properly configured to match other
		 * end's settings, we create pseudo PHY devices that
		 * will match against our special PHY driver
		 */
 		phydev = phy_device_create(chip->parent_miibus,
					   chip->info->port_base_addr + i,
					   MV88E6XXX_SWITCH_PORT_PHY_ID);
		phydev->dev.device_node = port_nodes[i];
		phydev->dev.priv = chip;
		phydev->duplex = DUPLEX_UNFORCED;

		err = phy_register_device(phydev);
		if (err)
			dev_err(dev, "Error: Failed to register a PHY\n");
	}

	return 0;
}