path: root/src/dbinc/mutex_int.h

/*
 * See the file LICENSE for redistribution information.
 *
 * Copyright (c) 1996, 2012 Oracle and/or its affiliates.  All rights reserved.
 *
 * $Id$
 */

#ifndef _DB_MUTEX_INT_H_
#define	_DB_MUTEX_INT_H_

#include "dbinc/atomic.h"

#if defined(__cplusplus)
extern "C" {
#endif

/*
 * Mutexes and Shared Latches
 *
 * Mutexes may be test-and-set (spinning & yielding when busy),
 * native versions (pthreads, WaitForSingleObject)
 * or a hybrid which has the lower no-contention overhead of test-and-set
 * mutexes, using operating system calls only to block and wakeup.
 *
 * Hybrid exclusive-only mutexes include a 'tas' field.
 * Hybrid DB_MUTEX_SHARED latches also include a 'shared' field.
 */

/*********************************************************************
 * POSIX.1 pthreads interface.
 *********************************************************************/
#if defined(HAVE_MUTEX_PTHREADS)
/*
 * Pthreads-based mutexes (exclusive-only) and latches (possibly shared)
 * have the same MUTEX_FIELDS union. Different parts of the union are used
 * depending on:
 *    -	whether HAVE_SHARED_LATCHES is defined, and
 *    - if HAVE_SHARED_LATCHES, whether this particular instance of a mutex
 *	is a shared mutexDB_MUTEX_SHARED.
 *
 * The rwlock part of the union is used *only* for non-hybrid shared latches;
 * in all other cases the mutex and cond fields are the only ones used.
 *
 *  configuration &	Who uses the field
 *  mutex
 *			mutex	cond	rwlock	tas
 * Native mutex		y	y
 * Hybrid mutexes	y	y		y
 * Native sharedlatches			y
 * Hybrid sharedlatches	y	y		y
 *
 * They all have a condition variable which is used only for
 * DB_MUTEX_SELF_BLOCK waits.
 *
 * There can be no self-blocking shared latches: the pthread_cond_wait() would
 * require getting a pthread_mutex_t, also it would not make sense.
 */
#define	MUTEX_FIELDS							\
	union {								\
		struct {						\
		    pthread_mutex_t mutex;	/* Mutex */		\
		    pthread_cond_t  cond;	/* Condition variable */ \
		} m;							\
		pthread_rwlock_t rwlock;	/* Read/write lock */	\
	} u;

#if defined(HAVE_SHARED_LATCHES) && !defined(HAVE_MUTEX_HYBRID)
#define	RET_SET_PTHREAD_LOCK(mutexp, ret) do {				\
	if (F_ISSET(mutexp, DB_MUTEX_SHARED))				\
		RET_SET((pthread_rwlock_wrlock(&(mutexp)->u.rwlock)),	\
		    ret);						\
	else								\
		RET_SET((pthread_mutex_lock(&(mutexp)->u.m.mutex)), ret); \
} while (0)
#define	RET_SET_PTHREAD_TRYLOCK(mutexp, ret) do {			\
	if (F_ISSET(mutexp, DB_MUTEX_SHARED))				\
		RET_SET((pthread_rwlock_trywrlock(&(mutexp)->u.rwlock)), \
		    ret);						\
	else								\
		RET_SET((pthread_mutex_trylock(&(mutexp)->u.m.mutex)),	\
		    ret);						\
} while (0)
#else
#define	RET_SET_PTHREAD_LOCK(mutexp, ret)				\
		RET_SET(pthread_mutex_lock(&(mutexp)->u.m.mutex), ret);
#define	RET_SET_PTHREAD_TRYLOCK(mutexp, ret)				\
		RET_SET(pthread_mutex_trylock(&(mutexp)->u.m.mutex), ret);
#endif
#endif

#ifdef HAVE_MUTEX_UI_THREADS
#include <thread.h>
#endif

/*********************************************************************
 * Solaris lwp threads interface.
 *
 * !!!
 * We use LWP mutexes on Solaris instead of UI or POSIX mutexes (both of
 * which are available), for two reasons.  First, the Solaris C library
 * includes versions of the both UI and POSIX thread mutex interfaces, but
 * they are broken in that they don't support inter-process locking, and
 * there's no way to detect it, e.g., calls to configure the mutexes for
 * inter-process locking succeed without error.  So, we use LWP mutexes so
 * that we don't fail in fairly undetectable ways because the application
 * wasn't linked with the appropriate threads library.  Second, there were
 * bugs in SunOS 5.7 (Solaris 7) where if an application loaded the C library
 * before loading the libthread/libpthread threads libraries (e.g., by using
 * dlopen to load the DB library), the pwrite64 interface would be translated
 * into a call to pwrite and DB would drop core.
 *********************************************************************/
#ifdef HAVE_MUTEX_SOLARIS_LWP
/*
 * XXX
 * Don't change <synch.h> to <sys/lwp.h> -- although lwp.h is listed in the
 * Solaris manual page as the correct include to use, it causes the Solaris
 * compiler on SunOS 2.6 to fail.
 */
#include <synch.h>

#define	MUTEX_FIELDS							\
	lwp_mutex_t mutex;		/* Mutex. */			\
	lwp_cond_t cond;		/* Condition variable. */
#endif

/*********************************************************************
 * Solaris/Unixware threads interface.
 *********************************************************************/
#ifdef HAVE_MUTEX_UI_THREADS
#include <thread.h>
#include <synch.h>

#define	MUTEX_FIELDS							\
	mutex_t mutex;			/* Mutex. */			\
	cond_t  cond;			/* Condition variable. */
#endif

/*********************************************************************
 * AIX C library functions.
 *********************************************************************/
#ifdef HAVE_MUTEX_AIX_CHECK_LOCK
#include <sys/atomic_op.h>
typedef int tsl_t;

#ifdef LOAD_ACTUAL_MUTEX_CODE
#define	MUTEX_INIT(x)	0
#define	MUTEX_SET(x)	(!_check_lock(x, 0, 1))
#define	MUTEX_UNSET(x)	_clear_lock(x, 0)
#endif
#endif

/*********************************************************************
 * Apple/Darwin library functions.
 *********************************************************************/
#ifdef HAVE_MUTEX_DARWIN_SPIN_LOCK_TRY
typedef u_int32_t tsl_t;

#ifdef LOAD_ACTUAL_MUTEX_CODE
extern int _spin_lock_try(tsl_t *);
extern void _spin_unlock(tsl_t *);
#define	MUTEX_SET(tsl)          _spin_lock_try(tsl)
#define	MUTEX_UNSET(tsl)        _spin_unlock(tsl)
#define	MUTEX_INIT(tsl)         (MUTEX_UNSET(tsl), 0)
#endif
#endif

/*********************************************************************
 * General C library functions (msemaphore).
 *
 * !!!
 * Check for HPPA as a special case, because it requires unusual alignment,
 * and doesn't support semaphores in malloc(3) or shmget(2) memory.
 *
 * !!!
 * Do not remove the MSEM_IF_NOWAIT flag.  The problem is that if a single
 * process makes two msem_lock() calls in a row, the second one returns an
 * error.  We depend on the fact that we can lock against ourselves in the
 * locking subsystem, where we set up a mutex so that we can block ourselves.
 * Tested on OSF1 v4.0.
 *********************************************************************/
#ifdef HAVE_MUTEX_HPPA_MSEM_INIT
#define	MUTEX_ALIGN	16
#endif

#if defined(HAVE_MUTEX_MSEM_INIT) || defined(HAVE_MUTEX_HPPA_MSEM_INIT)
#include <sys/mman.h>
typedef msemaphore tsl_t;

#ifdef LOAD_ACTUAL_MUTEX_CODE
#define	MUTEX_INIT(x)	(msem_init(x, MSEM_UNLOCKED) <= (msemaphore *)0)
#define	MUTEX_SET(x)	(!msem_lock(x, MSEM_IF_NOWAIT))
#define	MUTEX_UNSET(x)	msem_unlock(x, 0)
#endif
#endif

/*********************************************************************
 * Plan 9 library functions.
 *********************************************************************/
#ifdef HAVE_MUTEX_PLAN9
typedef Lock tsl_t;

#define	MUTEX_INIT(x)	(memset(x, 0, sizeof(Lock)), 0)
#define	MUTEX_SET(x)	canlock(x)
#define	MUTEX_UNSET(x)	unlock(x)
#endif

/*********************************************************************
 * Reliant UNIX C library functions.
 *********************************************************************/
#ifdef HAVE_MUTEX_RELIANTUNIX_INITSPIN
#include <ulocks.h>
typedef spinlock_t tsl_t;

#ifdef LOAD_ACTUAL_MUTEX_CODE
#define	MUTEX_INIT(x)	(initspin(x, 1), 0)
#define	MUTEX_SET(x)	(cspinlock(x) == 0)
#define	MUTEX_UNSET(x)	spinunlock(x)
#endif
#endif

/*********************************************************************
 * General C library functions (POSIX 1003.1 sema_XXX).
 *
 * !!!
 * Never selected by autoconfig in this release (semaphore calls are known
 * to not work in Solaris 5.5).
 *********************************************************************/
#ifdef HAVE_MUTEX_SEMA_INIT
#include <synch.h>
typedef sema_t tsl_t;

#ifdef LOAD_ACTUAL_MUTEX_CODE
#define	MUTEX_DESTROY(x) sema_destroy(x)
#define	MUTEX_INIT(x)	 (sema_init(x, 1, USYNC_PROCESS, NULL) != 0)
#define	MUTEX_SET(x)	 (sema_wait(x) == 0)
#define	MUTEX_UNSET(x)	 sema_post(x)
#endif
#endif

/*********************************************************************
 * SGI C library functions.
 *********************************************************************/
#ifdef HAVE_MUTEX_SGI_INIT_LOCK
#include <abi_mutex.h>
typedef abilock_t tsl_t;

#ifdef LOAD_ACTUAL_MUTEX_CODE
#define	MUTEX_INIT(x)	(init_lock(x) != 0)
#define	MUTEX_SET(x)	(!acquire_lock(x))
#define	MUTEX_UNSET(x)	release_lock(x)
#endif
#endif

/*********************************************************************
 * Solaris C library functions.
 *
 * !!!
 * These are undocumented functions, but they're the only ones that work
 * correctly as far as we know.
 *********************************************************************/
#ifdef HAVE_MUTEX_SOLARIS_LOCK_TRY
#include <sys/atomic.h>
#define	MUTEX_MEMBAR(x)	membar_enter()
#define	MEMBAR_ENTER()	membar_enter()
#define	MEMBAR_EXIT()	membar_exit()
#include <sys/machlock.h>
typedef lock_t tsl_t;

/*
 * The functions are declared in <sys/machlock.h>, but under #ifdef KERNEL.
 * Re-declare them here to avoid warnings.
 */
extern  int _lock_try(lock_t *);
extern void _lock_clear(lock_t *);

#ifdef LOAD_ACTUAL_MUTEX_CODE
#define	MUTEX_INIT(x)	0
#define	MUTEX_SET(x)	_lock_try(x)
#define	MUTEX_UNSET(x)	_lock_clear(x)
#endif
#endif

/*********************************************************************
 * VMS.
 *********************************************************************/
#ifdef HAVE_MUTEX_VMS
#include <sys/mman.h>
#include <builtins.h>
typedef volatile unsigned char tsl_t;

#ifdef LOAD_ACTUAL_MUTEX_CODE
#ifdef __ALPHA
#define	MUTEX_SET(tsl)		(!__TESTBITSSI(tsl, 0))
#else /* __VAX */
#define	MUTEX_SET(tsl)		(!(int)_BBSSI(0, tsl))
#endif
#define	MUTEX_UNSET(tsl)	(*(tsl) = 0)
#define	MUTEX_INIT(tsl)         (MUTEX_UNSET(tsl), 0)
#endif
#endif

/*********************************************************************
 * VxWorks
 * Use basic binary semaphores in VxWorks, as we currently do not need
 * any special features.  We do need the ability to single-thread the
 * entire system, however, because VxWorks doesn't support the open(2)
 * flag O_EXCL, the mechanism we normally use to single thread access
 * when we're first looking for a DB environment.
 *********************************************************************/
#ifdef HAVE_MUTEX_VXWORKS
#include "taskLib.h"
typedef SEM_ID tsl_t;

#ifdef LOAD_ACTUAL_MUTEX_CODE
/*
 * Uses of this MUTEX_SET() need to have a local 'nowait' variable,
 * which determines whether to return right away when the semaphore
 * is busy or to wait until it is available.
 */
#define	MUTEX_SET(tsl)							\
	(semTake((*(tsl)), nowait ? NO_WAIT : WAIT_FOREVER) == OK)
#define	MUTEX_UNSET(tsl)	(semGive((*tsl)))
#define	MUTEX_INIT(tsl)							\
	((*(tsl) = semBCreate(SEM_Q_FIFO, SEM_FULL)) == NULL)
#define	MUTEX_DESTROY(tsl)	semDelete(*tsl)
#endif
#endif

/*********************************************************************
 * Win16
 *
 * Win16 spinlocks are simple because we cannot possibly be preempted.
 *
 * !!!
 * We should simplify this by always returning a no-need-to-lock lock
 * when we initialize the mutex.
 *********************************************************************/
#ifdef HAVE_MUTEX_WIN16
typedef unsigned int tsl_t;

#ifdef LOAD_ACTUAL_MUTEX_CODE
#define	MUTEX_INIT(x)		0
#define	MUTEX_SET(tsl)		(*(tsl) = 1)
#define	MUTEX_UNSET(tsl)	(*(tsl) = 0)
#endif
#endif

/*********************************************************************
 * Win32 - always a hybrid mutex
 *********************************************************************/
#if defined(HAVE_MUTEX_WIN32) || defined(HAVE_MUTEX_WIN32_GCC)
typedef LONG volatile tsl_t;
#define	MUTEX_FIELDS							\
	LONG nwaiters;							\
	u_int32_t id;	/* ID used for creating events */		\

#if defined(LOAD_ACTUAL_MUTEX_CODE)
#define	MUTEX_SET(tsl)		(!InterlockedExchange((PLONG)tsl, 1))
#define	MUTEX_UNSET(tsl)	InterlockedExchange((PLONG)tsl, 0)
#define	MUTEX_INIT(tsl)		MUTEX_UNSET(tsl)

/*
 * From Intel's performance tuning documentation (and see SR #6975):
 * ftp://download.intel.com/design/perftool/cbts/appnotes/sse2/w_spinlock.pdf
 *
 * "For this reason, it is highly recommended that you insert the PAUSE
 * instruction into all spin-wait code immediately. Using the PAUSE
 * instruction does not affect the correctness of programs on existing
 * platforms, and it improves performance on Pentium 4 processor platforms."
 */
#ifdef HAVE_MUTEX_WIN32
#if !defined(_WIN64) && !defined(DB_WINCE)
#define	MUTEX_PAUSE		{__asm{_emit 0xf3}; __asm{_emit 0x90}}
#endif
#endif
#ifdef HAVE_MUTEX_WIN32_GCC
#define	MUTEX_PAUSE		__asm__ volatile ("rep; nop" : : );
#endif
#endif
#endif

/*********************************************************************
 * 68K/gcc assembly.
 *********************************************************************/
#ifdef HAVE_MUTEX_68K_GCC_ASSEMBLY
typedef unsigned char tsl_t;

#ifdef LOAD_ACTUAL_MUTEX_CODE
/* gcc/68K: 0 is clear, 1 is set. */
#define	MUTEX_SET(tsl) ({						\
	register tsl_t *__l = (tsl);					\
	int __r;							\
	    __asm__ volatile("tas  %1; \n				\
			  seq  %0"					\
		: "=dm" (__r), "=m" (*__l)				\
		: "1" (*__l)						\
		);							\
	__r & 1;							\
})

#define	MUTEX_UNSET(tsl)	(*(tsl) = 0)
#define	MUTEX_INIT(tsl)         (MUTEX_UNSET(tsl), 0)
#endif
#endif

/*********************************************************************
 * ALPHA/gcc assembly.
 *********************************************************************/
#ifdef HAVE_MUTEX_ALPHA_GCC_ASSEMBLY
typedef u_int32_t tsl_t;

#define	MUTEX_ALIGN	4

#ifdef LOAD_ACTUAL_MUTEX_CODE
/*
 * For gcc/alpha.  Should return 0 if could not acquire the lock, 1 if
 * lock was acquired properly.
 */
static inline int
MUTEX_SET(tsl_t *tsl) {
	register tsl_t *__l = tsl;
	register tsl_t __r;
	__asm__ volatile(
		"1:	ldl_l	%0,%2\n"
		"	blbs	%0,2f\n"
		"	or	$31,1,%0\n"
		"	stl_c	%0,%1\n"
		"	beq	%0,3f\n"
		"	mb\n"
		"	br	3f\n"
		"2:	xor	%0,%0\n"
		"3:"
		: "=&r"(__r), "=m"(*__l) : "1"(*__l) : "memory");
	return __r;
}

/*
 * Unset mutex. Judging by Alpha Architecture Handbook, the mb instruction
 * might be necessary before unlocking
 */
static inline int
MUTEX_UNSET(tsl_t *tsl) {
	__asm__ volatile("	mb\n");
	return *tsl = 0;
}

#define	MUTEX_INIT(tsl)		MUTEX_UNSET(tsl)
#endif
#endif

/*********************************************************************
 * Tru64/cc assembly.
 *********************************************************************/
#ifdef HAVE_MUTEX_TRU64_CC_ASSEMBLY
typedef volatile u_int32_t tsl_t;

#define	MUTEX_ALIGN	4

#ifdef LOAD_ACTUAL_MUTEX_CODE
#include <alpha/builtins.h>
#define	MUTEX_SET(tsl)		(__LOCK_LONG_RETRY((tsl), 1) != 0)
#define	MUTEX_UNSET(tsl)	(__UNLOCK_LONG(tsl))

#define	MUTEX_INIT(tsl)		(MUTEX_UNSET(tsl), 0)
#endif
#endif

/*********************************************************************
 * ARM/gcc assembly.
 *********************************************************************/
#ifdef HAVE_MUTEX_ARM_GCC_ASSEMBLY
typedef unsigned char tsl_t;

#ifdef LOAD_ACTUAL_MUTEX_CODE
/* gcc/arm: 0 is clear, 1 is set. */
#define	MUTEX_SET(tsl) ({						\
	int __r;							\
	__asm__ volatile(						\
		"swpb	%0, %1, [%2]\n\t"				\
		"eor	%0, %0, #1\n\t"					\
	    : "=&r" (__r)						\
	    : "r" (1), "r" (tsl)					\
	    );								\
	__r & 1;							\
})

#define	MUTEX_UNSET(tsl)	(*(volatile tsl_t *)(tsl) = 0)
#define	MUTEX_INIT(tsl)         (MUTEX_UNSET(tsl), 0)
#endif
#endif

/*********************************************************************
 * HPPA/gcc assembly.
 *********************************************************************/
#ifdef HAVE_MUTEX_HPPA_GCC_ASSEMBLY
typedef u_int32_t tsl_t;

#define	MUTEX_ALIGN	16

#ifdef LOAD_ACTUAL_MUTEX_CODE
/*
 * The PA-RISC has a "load and clear" instead of a "test and set" instruction.
 * The 32-bit word used by that instruction must be 16-byte aligned.  We could
 * use the "aligned" attribute in GCC but that doesn't work for stack variables.
 */
#define	MUTEX_SET(tsl) ({						\
	register tsl_t *__l = (tsl);					\
	int __r;							\
	__asm__ volatile("ldcws 0(%1),%0" : "=r" (__r) : "r" (__l));	\
	__r & 1;							\
})

#define	MUTEX_UNSET(tsl)        (*(volatile tsl_t *)(tsl) = -1)
#define	MUTEX_INIT(tsl)		(MUTEX_UNSET(tsl), 0)
#endif
#endif

/*********************************************************************
 * IA64/gcc assembly.
 *********************************************************************/
#ifdef HAVE_MUTEX_IA64_GCC_ASSEMBLY
typedef volatile unsigned char tsl_t;

#ifdef LOAD_ACTUAL_MUTEX_CODE
/* gcc/ia64: 0 is clear, 1 is set. */
#define	MUTEX_SET(tsl) ({						\
	register tsl_t *__l = (tsl);					\
	long __r;							\
	__asm__ volatile("xchg1 %0=%1,%2" :				\
		     "=r"(__r), "+m"(*__l) : "r"(1));			\
	__r ^ 1;							\
})

/*
 * Store through a "volatile" pointer so we get a store with "release"
 * semantics.
 */
#define	MUTEX_UNSET(tsl)	(*(tsl_t *)(tsl) = 0)
#define	MUTEX_INIT(tsl)         (MUTEX_UNSET(tsl), 0)
#endif
#endif

/*********************************************************************
 * PowerPC/gcc assembly.
 *********************************************************************/
#if defined(HAVE_MUTEX_PPC_GCC_ASSEMBLY)
typedef u_int32_t tsl_t;

#ifdef LOAD_ACTUAL_MUTEX_CODE
/*
 * The PowerPC does a sort of pseudo-atomic locking.  You set up a
 * 'reservation' on a chunk of memory containing a mutex by loading the
 * mutex value with LWARX.  If the mutex has an 'unlocked' (arbitrary)
 * value, you then try storing into it with STWCX.  If no other process or
 * thread broke your 'reservation' by modifying the memory containing the
 * mutex, then the STCWX succeeds; otherwise it fails and you try to get
 * a reservation again.
 *
 * While mutexes are explicitly 4 bytes, a 'reservation' applies to an
 * entire cache line, normally 32 bytes, aligned naturally.  If the mutex
 * lives near data that gets changed a lot, there's a chance that you'll
 * see more broken reservations than you might otherwise.  The only
 * situation in which this might be a problem is if one processor is
 * beating on a variable in the same cache block as the mutex while another
 * processor tries to acquire the mutex.  That's bad news regardless
 * because of the way it bashes caches, but if you can't guarantee that a
 * mutex will reside in a relatively quiescent cache line, you might
 * consider padding the mutex to force it to live in a cache line by
 * itself.  No, you aren't guaranteed that cache lines are 32 bytes.  Some
 * embedded processors use 16-byte cache lines, while some 64-bit
 * processors use 128-bit cache lines.  But assuming a 32-byte cache line
 * won't get you into trouble for now.
 *
 * If mutex locking is a bottleneck, then you can speed it up by adding a
 * regular LWZ load before the LWARX load, so that you can test for the
 * common case of a locked mutex without wasting cycles making a reservation.
 *
 * gcc/ppc: 0 is clear, 1 is set.
 */
static inline int
MUTEX_SET(int *tsl)  {
	int __r;
	__asm__ volatile (
"0:                             \n\t"
"       lwarx   %0,0,%1         \n\t"
"       cmpwi   %0,0            \n\t"
"       bne-    1f              \n\t"
"       stwcx.  %1,0,%1         \n\t"
"       isync                   \n\t"
"       beq+    2f              \n\t"
"       b       0b              \n\t"
"1:                             \n\t"
"       li      %1,0            \n\t"
"2:                             \n\t"
	 : "=&r" (__r), "+r" (tsl)
	 :
	 : "cr0", "memory");
	 return (int)tsl;
}

static inline int
MUTEX_UNSET(tsl_t *tsl) {
	 __asm__ volatile("sync" : : : "memory");
	 return *tsl = 0;
}
#define	MUTEX_INIT(tsl)		MUTEX_UNSET(tsl)
#endif
#endif

/*********************************************************************
 * OS/390 C.
 *********************************************************************/
#ifdef HAVE_MUTEX_S390_CC_ASSEMBLY
typedef int tsl_t;

#ifdef LOAD_ACTUAL_MUTEX_CODE
/*
 * cs() is declared in <stdlib.h> but is built in to the compiler.
 * Must use LANGLVL(EXTENDED) to get its declaration.
 */
#define	MUTEX_SET(tsl)		(!cs(&zero, (tsl), 1))
#define	MUTEX_UNSET(tsl)	(*(tsl) = 0)
#define	MUTEX_INIT(tsl)         (MUTEX_UNSET(tsl), 0)
#endif
#endif

/*********************************************************************
 * S/390 32-bit assembly.
 *********************************************************************/
#ifdef HAVE_MUTEX_S390_GCC_ASSEMBLY
typedef int tsl_t;

#ifdef LOAD_ACTUAL_MUTEX_CODE
/* gcc/S390: 0 is clear, 1 is set. */
static inline int
MUTEX_SET(tsl_t *tsl) {							\
	register tsl_t *__l = (tsl);					\
	int __r;							\
  __asm__ volatile(							\
       "    la    1,%1\n"						\
       "    lhi   0,1\n"						\
       "    l     %0,%1\n"						\
       "0:  cs    %0,0,0(1)\n"						\
       "    jl    0b"							\
       : "=&d" (__r), "+m" (*__l)					\
       : : "0", "1", "cc");						\
	return !__r;							\
}

#define	MUTEX_UNSET(tsl)	(*(tsl) = 0)
#define	MUTEX_INIT(tsl)         (MUTEX_UNSET(tsl), 0)
#endif
#endif

/*********************************************************************
 * SCO/cc assembly.
 *********************************************************************/
#ifdef HAVE_MUTEX_SCO_X86_CC_ASSEMBLY
typedef unsigned char tsl_t;

#ifdef LOAD_ACTUAL_MUTEX_CODE
/*
 * UnixWare has threads in libthread, but OpenServer doesn't (yet).
 *
 * cc/x86: 0 is clear, 1 is set.
 */
#if defined(__USLC__)
asm int
_tsl_set(void *tsl)
{
%mem tsl
	movl	tsl, %ecx
	movl	$1, %eax
	lock
	xchgb	(%ecx),%al
	xorl	$1,%eax
}
#endif

#define	MUTEX_SET(tsl)		_tsl_set(tsl)
#define	MUTEX_UNSET(tsl)	(*(tsl) = 0)
#define	MUTEX_INIT(tsl)         (MUTEX_UNSET(tsl), 0)
#endif
#endif

/*********************************************************************
 * Sparc/gcc assembly.
 *********************************************************************/
#ifdef HAVE_MUTEX_SPARC_GCC_ASSEMBLY
typedef unsigned char tsl_t;

#define	MUTEX_ALIGN	8

#ifdef LOAD_ACTUAL_MUTEX_CODE
/*
 * The ldstub instruction takes the location specified by its first argument
 * (a register containing a memory address) and loads its contents into its
 * second argument (a register) and atomically sets the contents the location
 * specified by its first argument to a byte of 1s.  (The value in the second
 * argument is never read, but only overwritten.)
 *
 * Hybrid mutexes require membar #StoreLoad and #LoadStore ordering on multi-
 * processor v9 systems.
 *
 * gcc/sparc: 0 is clear, 1 is set.
 */
#define	MUTEX_SET(tsl) ({						\
	register tsl_t *__l = (tsl);					\
	register tsl_t __r;						\
	__asm__ volatile						\
	    ("ldstub [%1],%0; stbar"					\
	    : "=r"( __r) : "r" (__l));					\
	!__r;								\
})

#define	MUTEX_UNSET(tsl)	(*(tsl) = 0, MUTEX_MEMBAR(tsl))
#define	MUTEX_INIT(tsl)         (MUTEX_UNSET(tsl), 0)
#define	MUTEX_MEMBAR(x)	\
	({ __asm__ volatile ("membar #StoreStore|#StoreLoad|#LoadStore"); })
#define	MEMBAR_ENTER() \
	({ __asm__ volatile ("membar #StoreStore|#StoreLoad"); })
#define	MEMBAR_EXIT() \
	({ __asm__ volatile ("membar #StoreStore|#LoadStore"); })
#endif
#endif

/*********************************************************************
 * UTS/cc assembly.
 *********************************************************************/
#ifdef HAVE_MUTEX_UTS_CC_ASSEMBLY
typedef int tsl_t;

#ifdef LOAD_ACTUAL_MUTEX_CODE
#define	MUTEX_INIT(x)	0
#define	MUTEX_SET(x)	(!uts_lock(x, 1))
#define	MUTEX_UNSET(x)	(*(x) = 0)
#endif
#endif

/*********************************************************************
 * MIPS/gcc assembly.
 *********************************************************************/
#ifdef HAVE_MUTEX_MIPS_GCC_ASSEMBLY
typedef u_int32_t tsl_t;

#define	MUTEX_ALIGN	4

#ifdef LOAD_ACTUAL_MUTEX_CODE
/*
 * For gcc/MIPS.  Should return 0 if could not acquire the lock, 1 if
 * lock was acquired properly.
 */
static inline int
MUTEX_SET(tsl_t *tsl) {
       register tsl_t *__l = tsl;
       register tsl_t __r, __t;
       __asm__ volatile(
	       "       .set push           \n"
	       "       .set mips2          \n"
	       "       .set noreorder      \n"
	       "       .set nomacro        \n"
	       "1:     ll      %0, %3      \n"
	       "       ori     %2, %0, 1   \n"
	       "       sc      %2, %1      \n"
	       "       beqzl   %2, 1b      \n"
	       "       nop                 \n"
	       "       andi    %2, %0, 1   \n"
	       "       sync                \n"
	       "       .set reorder        \n"
	       "       .set pop            \n"
	       : "=&r" (__t), "=m" (*tsl), "=&r" (__r)
	       : "m" (*tsl)
	       : "memory");
       return (!__r);
}

static inline void
MUTEX_UNSET(tsl_t *tsl) {
	__asm__ volatile(
	       "       .set noreorder      \n"
	       "       sync                \n"
	       "       sw      $0, %0      \n"
	       "       .set reorder        \n"
	       : "=m" (*tsl)
	       : "m" (*tsl)
	       : "memory");
}

#define	       MUTEX_INIT(tsl)         (*(tsl) = 0)
#endif
#endif

/*********************************************************************
 * x86/gcc (32- and 64-bit) assembly.
 *********************************************************************/
#if defined(HAVE_MUTEX_X86_GCC_ASSEMBLY) || \
    defined(HAVE_MUTEX_X86_64_GCC_ASSEMBLY)
typedef volatile unsigned char tsl_t;

#ifdef LOAD_ACTUAL_MUTEX_CODE
/* gcc/x86: 0 is clear, 1 is set. */
#define	MUTEX_SET(tsl) ({						\
	tsl_t __r;							\
	__asm__ volatile("movb $1, %b0\n\t"				\
		"xchgb %b0,%1"						\
	    : "=&q" (__r)						\
	    : "m" (*(tsl_t *)(tsl))					\
	    : "memory", "cc");						\
	!__r;	/* return 1 on success, 0 on failure */			\
})

#define	MUTEX_UNSET(tsl)        (*(tsl_t *)(tsl) = 0)
#define	MUTEX_INIT(tsl)		(MUTEX_UNSET(tsl), 0)
/*
 * We need to pass a valid address to generate the memory barrier
 * otherwise PURIFY will complain.  Use something referenced recently
 * and initialized.
 */
#if defined(HAVE_MUTEX_X86_GCC_ASSEMBLY)
#define	MUTEX_MEMBAR(addr)						\
    ({ __asm__ volatile ("lock; addl $0, %0" ::"m" (addr): "memory"); 1; })
#else
#define	MUTEX_MEMBAR(addr)						\
    ({ __asm__ volatile ("mfence" ::: "memory"); 1; })
#endif

/*
 * From Intel's performance tuning documentation (and see SR #6975):
 * ftp://download.intel.com/design/perftool/cbts/appnotes/sse2/w_spinlock.pdf
 *
 * "For this reason, it is highly recommended that you insert the PAUSE
 * instruction into all spin-wait code immediately. Using the PAUSE
 * instruction does not affect the correctness of programs on existing
 * platforms, and it improves performance on Pentium 4 processor platforms."
 */
#define	MUTEX_PAUSE		__asm__ volatile ("rep; nop" : : );
#endif
#endif

/* End of operating system & hardware architecture-specific definitions */

/*
 * Mutex alignment defaults to sizeof(unsigned int).
 *
 * !!!
 * Various systems require different alignments for mutexes (the worst we've
 * seen so far is 16-bytes on some HP architectures).  Malloc(3) is assumed
 * to return reasonable alignment, all other mutex users must ensure proper
 * alignment locally.
 */
#ifndef	MUTEX_ALIGN
#define	MUTEX_ALIGN	sizeof(unsigned int)
#endif

/*
 * Mutex destruction defaults to a no-op.
 */
#ifndef	MUTEX_DESTROY
#define	MUTEX_DESTROY(x)
#endif

/*
 * Mutex pause defaults to a no-op.
 */
#ifndef	MUTEX_PAUSE
#define	MUTEX_PAUSE
#endif

/*
 * If no native atomic support is available then use mutexes to
 * emulate atomic increment, decrement, and compare-and-exchange.
 * The address of the atomic value selects which of a small number
 * of mutexes to use to protect the updates.
 * The number of mutexes should be somewhat larger than the number of
 * processors in the system in order to minimize unnecessary contention.
 * It defaults to 8 to handle most small (1-4) cpu systems, if it hasn't
 * already been defined (e.g. in db_config.h)
 */
#if !defined(HAVE_ATOMIC_SUPPORT) && defined(HAVE_MUTEX_SUPPORT) && \
    !defined(MAX_ATOMIC_MUTEXES)
#define	MAX_ATOMIC_MUTEXES	1
#endif

/*
 * DB_MUTEXMGR --
 *	The mutex manager encapsulates the mutex system.
 */
struct __db_mutexmgr {
	/* These fields are never updated after creation, so not protected. */
	DB_ENV	*dbenv;			/* Environment */
	REGINFO	 reginfo;		/* Region information */

	void	*mutex_array;		/* Base of the mutex array */
};

/* Macros to lock/unlock the mutex region as a whole. */
#define	MUTEX_SYSTEM_LOCK(dbenv)					\
	MUTEX_LOCK(dbenv, ((DB_MUTEXREGION *)				\
	    (dbenv)->mutex_handle->reginfo.primary)->mtx_region)
#define	MUTEX_SYSTEM_UNLOCK(dbenv)					\
	MUTEX_UNLOCK(dbenv, ((DB_MUTEXREGION *)				\
	    (dbenv)->mutex_handle->reginfo.primary)->mtx_region)

/*
 * DB_MUTEXREGION --
 *	The primary mutex data structure in the shared memory region.
 */
typedef struct __db_mutexregion { /* SHARED */
	/* These fields are initialized at create time and never modified. */
	roff_t		mutex_off_alloc;/* Offset of mutex array */
	roff_t		mutex_off;	/* Adjusted offset of mutex array */
	db_size_t	mutex_size;	/* Size of the aligned mutex */
	roff_t		thread_off;	/* Offset of the thread area. */

	db_mutex_t	mtx_region;	/* Region mutex. */

	/* Protected using the region mutex. */
	db_mutex_t	mutex_next;	/* Next free mutex */

#if !defined(HAVE_ATOMIC_SUPPORT) && defined(HAVE_MUTEX_SUPPORT)
	/* Mutexes for emulating atomic operations. */
	db_mutex_t	mtx_atomic[MAX_ATOMIC_MUTEXES];
#endif

	DB_MUTEX_STAT	stat;		/* Mutex statistics */
} DB_MUTEXREGION;

#ifdef HAVE_MUTEX_SUPPORT
struct __db_mutex_t { /* SHARED */	/* Mutex. */
#ifdef MUTEX_FIELDS
	MUTEX_FIELDS			/* Opaque thread mutex structures. */
#endif
#ifndef HAVE_MUTEX_FCNTL
#if defined(HAVE_MUTEX_HYBRID) || \
    (defined(HAVE_SHARED_LATCHES) && !defined(HAVE_MUTEX_PTHREADS))
	/*
	 * For hybrid and test-and-set shared latches it is a counter:
	 * 0 means it is free,
	 * -1 is exclusively locked,
	 * > 0 is the number of shared readers.
	 * Pthreads shared latches use pthread_rwlock instead.
	 */
	tsl_t		tas;
	db_atomic_t	sharecount;
#elif !defined(MUTEX_FIELDS)
	/*
	 * This is the Test and Set flag for exclusive latches (mutexes):
	 * there is a free value (often 0, 1, or -1) and a set value.
	 */
	tsl_t		tas;
#endif
#endif
#ifdef HAVE_MUTEX_HYBRID
	volatile u_int32_t wait;	/* Count of waiters. */
#endif
	pid_t		pid;		/* Process owning mutex */
	db_threadid_t	tid;		/* Thread owning mutex */

	db_mutex_t mutex_next_link;	/* Linked list of free mutexes. */

#ifdef HAVE_STATISTICS
	int	  alloc_id;		/* Allocation ID. */

	u_int32_t mutex_set_wait;	/* Granted after wait. */
	u_int32_t mutex_set_nowait;	/* Granted without waiting. */
#ifdef HAVE_SHARED_LATCHES
	u_int32_t mutex_set_rd_wait;	/* Granted shared lock after wait. */
	u_int32_t mutex_set_rd_nowait;	/* Granted shared lock w/out waiting. */
#endif
#ifdef HAVE_MUTEX_HYBRID
	u_int32_t hybrid_wait;
	u_int32_t hybrid_wakeup;	/* for counting spurious wakeups */
#endif
#endif

	/*
	 * A subset of the flag arguments for __mutex_alloc().
	 *
	 * Flags should be an unsigned integer even if it's not required by
	 * the possible flags values, getting a single byte on some machines
	 * is expensive, and the mutex structure is a MP hot spot.
	 */
	volatile u_int32_t flags;		/* MUTEX_XXX */
};
#endif

/* Macro to get a reference to a specific mutex. */
#define	MUTEXP_SET(env, indx)						\
	(F_ISSET(env, ENV_PRIVATE) ? (DB_MUTEX *) indx :		\
	(DB_MUTEX *)((u_int8_t *)env->mutex_handle->mutex_array +	\
	    (indx) *							\
	    ((DB_MUTEXREGION *)env->mutex_handle->reginfo.primary)->mutex_size))

/*
 * Check that a particular mutex is exclusively held at least by someone, not
 * necessarily the current thread.
 */
#ifdef HAVE_MUTEX_SUPPORT
#define	MUTEX_IS_OWNED(env, mutex)					\
	(mutex == MUTEX_INVALID || !MUTEX_ON(env) ||			\
	F_ISSET(env->dbenv, DB_ENV_NOLOCKING) ||			\
	F_ISSET(MUTEXP_SET(env, mutex), DB_MUTEX_LOCKED))
#else
#define	MUTEX_IS_OWNED(env, mutex)	0
#endif

#if defined(HAVE_MUTEX_HYBRID) ||  defined(DB_WIN32) ||		\
	(defined(HAVE_SHARED_LATCHES) && !defined(HAVE_MUTEX_PTHREADS))
#define	MUTEXP_IS_BUSY(mutexp)					\
	(F_ISSET(mutexp, DB_MUTEX_SHARED) ?			\
	(atomic_read(&(mutexp)->sharecount) != 0) :		\
	F_ISSET(mutexp, DB_MUTEX_LOCKED))
#define	MUTEXP_BUSY_FIELD(mutexp)		\
	(F_ISSET(mutexp, DB_MUTEX_SHARED) ?	\
	(atomic_read(&(mutexp)->sharecount)) : (mutexp)->flags)
#else
/* Pthread_rwlocks don't have an low-cost 'is it being shared?' predicate. */
#define	MUTEXP_IS_BUSY(mutexp)	(F_ISSET((mutexp), DB_MUTEX_LOCKED))
#define	MUTEXP_BUSY_FIELD(mutexp)	((mutexp)->flags)
#endif

#define	MUTEX_IS_BUSY(env, mutex)					\
	(mutex == MUTEX_INVALID || !MUTEX_ON(env) ||			\
	F_ISSET(env->dbenv, DB_ENV_NOLOCKING) ||			\
	MUTEXP_IS_BUSY(MUTEXP_SET(env, mutex)))

#define	MUTEX_REQUIRED(env, mutex)					\
	DB_ASSERT(env, MUTEX_IS_OWNED(env, mutex))

#define	MUTEX_REQUIRED_READ(env, mutex)					\
	DB_ASSERT(env, MUTEX_IS_OWNED(env, mutex) || MUTEX_IS_BUSY(env, mutex))

/*
 * Test and set (and thus hybrid) shared latches use compare & exchange
 * to acquire; the others the mutex-setting primitive defined above.
 */
#ifdef LOAD_ACTUAL_MUTEX_CODE

#if defined(HAVE_SHARED_LATCHES)
/* This is the value of the 'sharecount' of an exclusively held tas latch.
 * The particular value is not special; it is just unlikely to be caused
 * by releasing or acquiring a shared latch too many times.
 */
#define	MUTEX_SHARE_ISEXCLUSIVE	(-1024)

/*
 * Get an exclusive lock on a possibly sharable latch. We use the native
 * MUTEX_SET() operation for non-sharable latches; it usually is faster.
 */
#define	MUTEXP_ACQUIRE(mutexp)	\
	(F_ISSET(mutexp, DB_MUTEX_SHARED) ?			\
	atomic_compare_exchange(env,				\
	    &(mutexp)->sharecount, 0, MUTEX_SHARE_ISEXCLUSIVE) :	\
	MUTEX_SET(&(mutexp)->tas))
#else
#define	MUTEXP_ACQUIRE(mutexp)		MUTEX_SET(&(mutexp)->tas)
#endif

#ifndef MEMBAR_ENTER
#define	MEMBAR_ENTER()
#define	MEMBAR_EXIT()
#endif

#endif

#if defined(__cplusplus)
}
#endif
#endif /* !_DB_MUTEX_INT_H_ */