Fix spelling typos

29 files changed, 126 insertions, 99 deletions

diff --git a/bfd/doc/ChangeLog b/bfd/doc/ChangeLog
index 5ecfab3164d..e41ddf52e85 100644
--- a/bfd/doc/ChangeLog
+++ b/bfd/doc/ChangeLog
@@ -1,3 +1,8 @@
+2006-07-24  Ralk Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* bfd..texinfo: Fix spelling mistakes.
+	* bfdint.texinfo: Likewise.
+
 2006-07-18  Nigel Stephens  <nigel@mips.com>
 
 	* bfd.texinfo: Add @section for "What to Put Where".
diff --git a/bfd/doc/bfd.texinfo b/bfd/doc/bfd.texinfo
index 38ba8ccc81e..dfcebb1e289 100644
--- a/bfd/doc/bfd.texinfo
+++ b/bfd/doc/bfd.texinfo
@@ -1,7 +1,7 @@
 \input texinfo.tex
 @setfilename bfd.info
 @c Copyright 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1997, 2000,
-@c 2001, 2002, 2003
+@c 2001, 2002, 2003, 2006
 @c Free Software Foundation, Inc.
 @c 
 @synindex fn cp
@@ -17,7 +17,7 @@ END-INFO-DIR-ENTRY
 @ifinfo
 This file documents the BFD library.
 
-Copyright (C) 1991, 2000, 2001, 2003 Free Software Foundation, Inc.
+Copyright (C) 1991, 2000, 2001, 2003, 2006 Free Software Foundation, Inc.
 
       Permission is granted to copy, distribute and/or modify this document
       under the terms of the GNU Free Documentation License, Version 1.1
@@ -43,7 +43,7 @@ notice identical to this one except for the removal of this paragraph
 @title{libbfd}
 @subtitle{The Binary File Descriptor Library}
 @sp 1
-@subtitle First Edition---BFD version < 3.0  % Since no product is stable berfore version 3.0 :-)
+@subtitle First Edition---BFD version < 3.0  % Since no product is stable before version 3.0 :-)
 @subtitle Original Document Created: April 1991
 @author {Steve Chamberlain}
 @author {Cygnus Support}
@@ -62,7 +62,7 @@ notice identical to this one except for the removal of this paragraph
 @end tex
 
 @vskip 0pt plus 1filll
-Copyright @copyright{} 1991, 2001, 2003 Free Software Foundation, Inc.
+Copyright @copyright{} 1991, 2001, 2003, 2006 Free Software Foundation, Inc.
 
       Permission is granted to copy, distribute and/or modify this document
       under the terms of the GNU Free Documentation License, Version 1.1
@@ -144,7 +144,7 @@ To use the library, include @file{bfd.h} and link with @file{libbfd.a}.
 BFD provides a common interface to the parts of an object file
 for a calling application. 
 
-When an application sucessfully opens a target file (object, archive, or
+When an application successfully opens a target file (object, archive, or
 whatever), a pointer to an internal structure is returned. This pointer
 points to a structure called @code{bfd}, described in
 @file{bfd.h}.  Our convention is to call this pointer a BFD, and
diff --git a/bfd/doc/bfdint.texi b/bfd/doc/bfdint.texi
index 79813decc77..15a763c40f0 100644
--- a/bfd/doc/bfdint.texi
+++ b/bfd/doc/bfdint.texi
@@ -1,6 +1,6 @@
 \input texinfo
 @c Copyright 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1998,
-@c 2000, 2001, 2002, 2003, 2004
+@c 2000, 2001, 2002, 2003, 2004, 2006
 @c Free Software Foundation, Inc.
 @setfilename bfdint.info
 
@@ -189,7 +189,7 @@ and handle it using the special hooks.
 
 In some cases there is also implicit information which BFD can not
 represent.  For example, the MIPS processor distinguishes small and
-large symbols, and requires that all small symbls be within 32K of the
+large symbols, and requires that all small symbols be within 32K of the
 GP register.  This means that the MIPS assembler must be able to mark
 variables as either small or large, and the MIPS linker must know to put
 small symbols within range of the GP register.  Since BFD can not
@@ -230,7 +230,7 @@ Follow the GNU coding standards.
 Avoid global variables.  We ideally want BFD to be fully reentrant, so
 that it can be used in multiple threads.  All uses of global or static
 variables interfere with that.  Initialized constant variables are OK,
-and they should be explicitly marked with const.  Instead of global
+and they should be explicitly marked with @samp{const}.  Instead of global
 variables, use data attached to a BFD or to a linker hash table.
 
 @item
@@ -1391,7 +1391,7 @@ constants used by the generic support.
 @subsection ELF sections and segments
 
 The ELF ABI permits a file to have either sections or segments or both.
-Relocateable object files conventionally have only sections.
+Relocatable object files conventionally have only sections.
 Executables conventionally have both.  Core files conventionally have
 only program segments.
 
diff --git a/binutils/ChangeLog b/binutils/ChangeLog
index 8508a18c8ab..a899ca8872d 100644
--- a/binutils/ChangeLog
+++ b/binutils/ChangeLog
@@ -1,3 +1,7 @@
+2006-07-24  Ralk Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* doc/binutils.texinfo: Fix spelling mistakes.
+
 2006-07-10  Jakub Jelinek  <jakub@redhat.com>
 
 	* readelf.c (get_dynamic_type): Handle DT_GNU_HASH.
diff --git a/binutils/doc/binutils.texi b/binutils/doc/binutils.texi
index de7aaf377ff..d74be80a9ed 100644
--- a/binutils/doc/binutils.texi
+++ b/binutils/doc/binutils.texi
@@ -889,7 +889,7 @@ Display symbols which have a target-specific special meaning.  These
 symbols are usually used by the target for some special processing and
 are not normally helpful when included included in the normal symbol
 lists.  For example for ARM targets this option would skip the mapping
-symbols used to mark transistions between ARM code, THUMB code and
+symbols used to mark transitions between ARM code, THUMB code and
 data.
 
 @item -t @var{radix}
@@ -1478,7 +1478,7 @@ optional.  You could instead do this:
 @item Run @code{objcopy --add-gnu-debuglink=foo.full foo}
 @end enumerate
 
-i.e. the file pointed to by the @option{--add-gnu-debuglink} can be the
+i.e., the file pointed to by the @option{--add-gnu-debuglink} can be the
 full executable.  It does not have to be a file created by the
 @option{--only-keep-debug} switch.
 
@@ -1766,15 +1766,15 @@ disassembly of BookE instructions.  @option{32} and @option{64} select
 PowerPC and PowerPC64 disassembly, respectively.  @option{e300} selects
 disassembly for the e300 family.
 
-For MIPS, this option controls the printing of instruction mneumonic
+For MIPS, this option controls the printing of instruction mnemonic
 names and register names in disassembled instructions.  Multiple
 selections from the following may be specified as a comma separated
 string, and invalid options are ignored:
 
 @table @code
 @item no-aliases
-Print the 'raw' instruction mneumonic instead of some pseudo
-instruction mneumonic.  I.E. print 'daddu' or 'or' instead of 'move',
+Print the 'raw' instruction mnemonic instead of some pseudo
+instruction mnemonic.  I.e., print 'daddu' or 'or' instead of 'move',
 'sll' instead of 'nop', etc.
 
 @item gpr-names=@var{ABI}
@@ -1817,7 +1817,7 @@ For VAX, you can specify function entry addresses with @option{-M
 entry:0xf00ba}.  You can use this multiple times to properly
 disassemble VAX binary files that don't contain symbol tables (like
 ROM dumps).  In these cases, the function entry mask would otherwise
-be decoded as VAX instructions, which would probably lead the the rest
+be decoded as VAX instructions, which would probably lead the rest
 of the function being wrongly disassembled.
 
 @item -p
@@ -2464,7 +2464,7 @@ names from the standard input instead.  All the results are printed on
 the standard output.  The difference between reading names from the
 command line versus reading names from the standard input is that
 command line arguments are expected to be just mangled names and no
-checking is performed to seperate them from surrounding text.  Thus
+checking is performed to separate them from surrounding text.  Thus
 for example:
 
 @smallexample
@@ -2578,7 +2578,7 @@ the Info entries for @file{binutils}.
 @quotation
 @emph{Warning:} @command{c++filt} is a new utility, and the details of its
 user interface are subject to change in future releases.  In particular,
-a command-line option may be required in the the future to decode a name
+a command-line option may be required in the future to decode a name
 passed as an argument on the command line; in other words, 
 
 @example
@@ -2892,7 +2892,7 @@ The name of the output file.  If this option is not used, then
 for the input file name, as the output file name.  If there is no
 non-option argument, then @command{windres} will write to standard output.
 @command{windres} can not write a COFF file to standard output.  Note,
-for compatability with @command{rc} the option @option{-fo} is also
+for compatibility with @command{rc} the option @option{-fo} is also
 accepted, but its use is not recommended.
 
 @item -J @var{format}
@@ -2929,7 +2929,7 @@ Specify an include directory to use when reading an @code{rc} file.
 @command{windres} will pass this to the preprocessor as an @option{-I}
 option.  @command{windres} will also search this directory when looking for
 files named in the @code{rc} file.  If the argument passed to this command
-matches any of the supported @var{formats} (as descrived in the @option{-J} 
+matches any of the supported @var{formats} (as described in the @option{-J} 
 option), it will issue a deprecation warning, and behave just like the
 @option{-J} option.  New programs should not use this behaviour.  If a
 directory happens to match a @var{format}, simple prefix it with @samp{./}
@@ -3837,7 +3837,7 @@ a chance to make a mistake.
 
 Even if the problem you experience is a fatal signal, you should still
 say so explicitly.  Suppose something strange is going on, such as your
-copy of the utility is out of synch, or you have encountered a bug in
+copy of the utility is out of sync, or you have encountered a bug in
 the C library on your system.  (This has happened!)  Your copy might
 crash and ours would not.  If you told us to expect a crash, then when
 ours fails to crash, we would know that the bug was not happening for
diff --git a/gas/ChangeLog b/gas/ChangeLog
index b12b230270b..cdf9095e814 100644
--- a/gas/ChangeLog
+++ b/gas/ChangeLog
@@ -1,3 +1,12 @@
+2006-07-24  Ralk Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* doc/all.texi, doc/as.texinfo, doc/c-arc.texi, doc/c-arm.texi,
+	doc/c-avr.texi, doc/c-bfin.texi, doc/c-i386.texi,
+	doc/c-i960.texi, doc/c-m32r.texi, doc/c-m68k.texi,
+	doc/c-mmix.texi, doc/c-pdp11.texi, doc/c-ppc.texi,
+	doc/c-tic54x.texi, doc/c-v850.texi, doc/c-xtensa.texi,
+	doc/c-z80.texi, doc/internals.texi: Fix some typos.
+
 2006-07-21  Nick Clifton  <nickc@redhat.com>
 
 	* config/tc-sh.c (md_longopts): Add -EL and -EB for use by the
diff --git a/gas/doc/all.texi b/gas/doc/all.texi
index 3334cbc2f27..ddabb689703 100644
--- a/gas/doc/all.texi
+++ b/gas/doc/all.texi
@@ -64,7 +64,7 @@
 @set Z80
 @set Z8000
 
-@c Does this version of the assembler use the difference-table kluge?
+@c Does this version of the assembler use the difference-table kludge?
 @set DIFF-TBL-KLUGE
 
 @c Do all machines described use IEEE floating point?
diff --git a/gas/doc/as.texinfo b/gas/doc/as.texinfo
index a86119e8cde..494381fdfc5 100644
--- a/gas/doc/as.texinfo
+++ b/gas/doc/as.texinfo
@@ -130,7 +130,7 @@ notice identical to this one except for the removal of this paragraph
 @subtitle Version @value{VERSION}
 @sp 1
 @sp 13
-The Free Software Foundation Inc.  thanks The Nice Computer
+The Free Software Foundation Inc.@: thanks The Nice Computer
 Company of Australia for loaning Dean Elsner to write the
 first (Vax) version of @command{as} for Project @sc{gnu}.
 The proprietors, management and staff of TNCCA thank FSF for
@@ -1181,13 +1181,13 @@ Assemble all undocumented Z80 instructions without warning.
 Issue a warning for undocumented Z80 instructions that also work on R800.
 @item  -warn-unportable-instructions 
 @itemx -Wup
-Issue a warning for undocumented Z80 instructions that do notwork on R800.  
+Issue a warning for undocumented Z80 instructions that do not work on R800.  
 @item  -forbid-undocumented-instructions 
 @itemx -Fud
 Treat all undocumented instructions as errors.
 @item  -forbid-unportable-instructions 
 @itemx -Fup
-Treat undocumented Z80 intructions that do notwork on R800 as errors.
+Treat undocumented Z80 instructions that do not work on R800 as errors.
 @end table
 @end ifset
 
@@ -2678,7 +2678,7 @@ independently of any floating point hardware in the computer running
 @cindex bit fields
 @cindex constants, bit field
 You can also define numeric constants as @dfn{bit fields}.
-specify two numbers separated by a colon---
+Specify two numbers separated by a colon---
 @example
 @var{mask}:@var{value}
 @end example
@@ -3276,7 +3276,7 @@ of the same name.  The character has ASCII value of @samp{\002} (control-B).
 This is a serial number to keep the labels distinct.  The first definition of
 @samp{0:} gets the number @samp{1}.  The 15th definition of @samp{0:} gets the 
 number @samp{15}, and so on.  Likewise the first definition of @samp{1:} gets
-the number @samp{1} and its 15th defintion gets @samp{15} as well.
+the number @samp{1} and its 15th definition gets @samp{15} as well.
 @end table
 
 So for example, the first @code{1:} is named @code{L1@kbd{C-B}1}, the 44th
@@ -3298,7 +3298,7 @@ dollar sign.  eg @samp{@b{55$}}.
 
 They can also be distinguished from ordinary local labels by their transformed
 name which uses ASCII character @samp{\001} (control-A) as the magic character
-to distinguish them from ordinary labels.  Thus the 5th defintion of @samp{6$}
+to distinguish them from ordinary labels.  Thus the 5th definition of @samp{6$}
 is named @samp{L6@kbd{C-A}5}.
 
 @node Dot
@@ -4078,7 +4078,7 @@ Don't forget to close the function by
 @cindex @code{cfi_endproc} directive
 @code{.cfi_endproc} is used at the end of a function where it closes its
 unwind entry previously opened by
-@code{.cfi_startproc}. and emits it to @code{.eh_frame}.
+@code{.cfi_startproc}, and emits it to @code{.eh_frame}.
 
 @section @code{.cfi_def_cfa @var{register}, @var{offset}}
 @code{.cfi_def_cfa} defines a rule for computing CFA as: @i{take 
@@ -4129,9 +4129,9 @@ to the @code{.debug_line} file name table.  The @var{fileno} operand should
 be a unique positive integer to use as the index of the entry in the table.
 The @var{filename} operand is a C string literal.
 
-The detail of filename indicies is exposed to the user because the filename
+The detail of filename indices is exposed to the user because the filename
 table is shared with the @code{.debug_info} section of the dwarf2 debugging
-information, and thus the user must know the exact indicies that table
+information, and thus the user must know the exact indices that table
 entries will have.
 
 @section @code{.loc @var{fileno} @var{lineno} [@var{column}] [@var{options}]}
@@ -5079,7 +5079,7 @@ You can write strings delimited in these other ways besides
 
 @table @code
 @item '@var{string}'
-You can delimit strings with single-quote charaters.
+You can delimit strings with single-quote characters.
 
 @item <@var{string}>
 You can delimit strings with matching angle brackets.
@@ -6051,7 +6051,7 @@ This directive finds or creates a symbol @code{table} and creates a
 This directive finds the symbol @code{child} and finds or creates the symbol
 @code{parent} and then creates a @code{VTABLE_INHERIT} relocation for the
 parent whose addend is the value of the child symbol.  As a special case the
-parent name of @code{0} is treated as refering the @code{*ABS*} section.
+parent name of @code{0} is treated as referring the @code{*ABS*} section.
 @end ifset
 
 @node Warning
@@ -6607,7 +6607,7 @@ make a mistake.
 
 Even if the problem you experience is a fatal signal, you should still say so
 explicitly.  Suppose something strange is going on, such as, your copy of
-@command{@value{AS}} is out of synch, or you have encountered a bug in the C
+@command{@value{AS}} is out of sync, or you have encountered a bug in the C
 library on your system.  (This has happened!)  Your copy might crash and ours
 would not.  If you told us to expect a crash, then when ours fails to crash, we
 would know that the bug was not happening for us.  If you had not told us to
@@ -6760,7 +6760,7 @@ Timothy Wall, Michael Hayes, and Greg Smart contributed to the various tic*
 flavors.
 
 David Heine, Sterling Augustine, Bob Wilson and John Ruttenberg from Tensilica,
-Inc. added support for Xtensa processors.
+Inc.@: added support for Xtensa processors.
 
 Several engineers at Cygnus Support have also provided many small bug fixes and
 configuration enhancements.
diff --git a/gas/doc/c-arc.texi b/gas/doc/c-arc.texi
index 04544d1e495..7f8ed6eb400 100644
--- a/gas/doc/c-arc.texi
+++ b/gas/doc/c-arc.texi
@@ -230,7 +230,7 @@ Determines the kinds of suffixes to be allowed.  Valid values are
 @code{SUFFIX_FLAG} which indicates the absence or presence of
 conditional suffixes and flag setting by the extension instruction.
 It is also possible to specify that an instruction sets the flags and
-is conditional by using @code{SUFFIX_CODE} | @code{SUFFIX_FLAG}.
+is condtional by using @code{SUFFIX_CODE} | @code{SUFFIX_FLAG}.
 
 @item @var{syntaxclass}
 Determines the syntax class for the instruction.  It can have the
@@ -251,7 +251,7 @@ Syntax Class Modifiers are:
 
 @item @code{OP1_MUST_BE_IMM}:
 Modifies syntax class SYNTAX_3OP,  specifying that the first operand
-of a three-operand instruction must be an immediate (i.e. the result
+of a three-operand instruction must be an immediate (i.e., the result
 is discarded).  OP1_MUST_BE_IMM is used by bitwise ORing it with
 SYNTAX_3OP as given in the example below.  This could usually be used
 to set the flags using specific instructions and not retain results. 
diff --git a/gas/doc/c-arm.texi b/gas/doc/c-arm.texi
index b5b9374b6bb..d9b7b26125a 100644
--- a/gas/doc/c-arm.texi
+++ b/gas/doc/c-arm.texi
@@ -254,7 +254,7 @@ and
 @item -meabi=@var{ver}
 This option specifies which EABI version the produced object files should
 conform to.
-The following values are recognised:
+The following values are recognized:
 @code{gnu},
 @code{4}
 and
@@ -358,7 +358,7 @@ For compatibility with older toolchains the assembler also accepts
 @cindex MOVW and MOVT relocations, ARM
 Relocations for @samp{MOVW} and @samp{MOVT} instructions can be generated
 by prefixing the value with @samp{#:lower16:} and @samp{#:upper16}
-respectively.  For example to load the 32-bit addresss of foo into r0:
+respectively.  For example to load the 32-bit address of foo into r0:
 
 @smallexample
         MOVW r0, #:lower16:foo
diff --git a/gas/doc/c-avr.texi b/gas/doc/c-avr.texi
index 515d2c689c3..9371bf2a364 100644
--- a/gas/doc/c-avr.texi
+++ b/gas/doc/c-avr.texi
@@ -109,7 +109,7 @@ statements.
 @cindex AVR register names
 @cindex register names, AVR
 
-The AVR has 32 x 8-bit general purpouse working registers @samp{r0},
+The AVR has 32 x 8-bit general purpose working registers @samp{r0},
 @samp{r1}, ... @samp{r31}.
 Six of the 32 registers can be used as three 16-bit indirect address
 register pointers for Data Space addressing. One of the these address
diff --git a/gas/doc/c-bfin.texi b/gas/doc/c-bfin.texi
index dcf649a2b89..0b8ae1d9f3e 100644
--- a/gas/doc/c-bfin.texi
+++ b/gas/doc/c-bfin.texi
@@ -97,9 +97,9 @@ The set of 32-bit registers (R0, R1, R2, R3, R4, R5, R6 and R7) that
 normally contain data for manipulation.  These are abbreviated as 
 D-register or Dreg.  Data registers can be accessed as 32-bit registers
 or as two independent 16-bit registers.  The least significant 16 bits
-of each register is called the "low" half and is desginated with ".L"
+of each register is called the "low" half and is designated with ".L"
 following the register name.  The most significant 16 bits are called
-the "high" half and is designated with ".H". following the name.
+the "high" half and is designated with ".H" following the name.
 
 @smallexample
    R7.L, r2.h, r4.L, R0.H
diff --git a/gas/doc/c-i386.texi b/gas/doc/c-i386.texi
index 52f3110303f..665f42fa771 100644
--- a/gas/doc/c-i386.texi
+++ b/gas/doc/c-i386.texi
@@ -647,7 +647,7 @@ then stores the result in the 4 byte location @samp{mem})
 @code{@value{AS}} supports Intel's MMX instruction set (SIMD
 instructions for integer data), available on Intel's Pentium MMX
 processors and Pentium II processors, AMD's K6 and K6-2 processors,
-Cyrix' M2 processor, and probably others.  It also supports AMD's 3DNow!
+Cyrix' M2 processor, and probably others.  It also supports AMD's 3DNow!@:
 instruction set (SIMD instructions for 32-bit floating point data)
 available on AMD's K6-2 processor and possibly others in the future.
 
@@ -710,7 +710,7 @@ value @samp{4} onto the stack, decrementing @samp{%esp} by 2.
 @end smallexample
 
 The same code in a 16-bit code section would generate the machine
-opcode bytes @samp{6a 04} (ie. without the operand size prefix), which
+opcode bytes @samp{6a 04} (i.e., without the operand size prefix), which
 is correct since the processor default operand size is assumed to be 16
 bits in a 16-bit code section.
 
diff --git a/gas/doc/c-i960.texi b/gas/doc/c-i960.texi
index 5dca1cf9c11..4d75bdfb8f7 100644
--- a/gas/doc/c-i960.texi
+++ b/gas/doc/c-i960.texi
@@ -69,7 +69,7 @@ Label:  @var{BR}
 @end smallexample
 
 The counter following a branch records the number of times that branch
-was @emph{not} taken; the differenc between the two counters is the
+was @emph{not} taken; the difference between the two counters is the
 number of times the branch @emph{was} taken.
 
 @cindex @code{gbr960}, i960 postprocessor
diff --git a/gas/doc/c-m32r.texi b/gas/doc/c-m32r.texi
index 30cd355aede..218ed250a01 100644
--- a/gas/doc/c-m32r.texi
+++ b/gas/doc/c-m32r.texi
@@ -65,7 +65,7 @@ configured.
 
 @item -EL
 @cindex @code{-EL} option, M32R
-This is a synonum for @emph{-little}.
+This is a synonym for @emph{-little}.
 
 @item -big
 @cindex @code{-big} option, M32R
@@ -110,7 +110,7 @@ implies @emph{-parallel}.
 Instructs @code{@value{AS}} to produce warning messages when
 questionable parallel instructions are encountered.  This option is
 enabled by default, but @code{@value{GCC}} disables it when it invokes
-@code{@value{AS}} directly.  Questionable instructions are those whoes
+@code{@value{AS}} directly.  Questionable instructions are those whose
 behaviour would be different if they were executed sequentially.  For
 example the code fragment @samp{mv r1, r2 || mv r3, r1} produces a
 different result from @samp{mv r1, r2 \n mv r3, r1} since the former
@@ -135,7 +135,7 @@ option.
 @item -ignore-parallel-conflicts
 @cindex @samp{-ignore-parallel-conflicts} option, M32RX
 This option tells the assembler's to stop checking parallel
-instructions for contraint violations.  This ability is provided for
+instructions for constraint violations.  This ability is provided for
 hardware vendors testing chip designs and should not be used under
 normal circumstances.
 
@@ -157,8 +157,8 @@ option.
 @item -warn-unmatched-high
 @cindex @samp{-warn-unmatched-high} option, M32R
 This option tells the assembler to produce a warning message if a
-@code{.high} pseudo op is encountered without a mathcing @code{.low}
-pseudo op.  The presence of such an unmatches pseudo op usually
+@code{.high} pseudo op is encountered without a matching @code{.low}
+pseudo op.  The presence of such an unmatched pseudo op usually
 indicates a programming error.
 
 @item -no-warn-unmatched-high
@@ -280,14 +280,14 @@ instructions in the M32R2 ISA as well as the ordinary M32R ISA.
 The directive performs a similar thing as the @emph{-little} command
 line option.  It tells the assembler to start producing little-endian
 code and data.  This option should be used with care as producing
-mixed-endian binary files is frought with danger.
+mixed-endian binary files is fraught with danger.
 
 @cindex @code{.big} directive, M32RX
 @item .big
 The directive performs a similar thing as the @emph{-big} command
 line option.  It tells the assembler to start producing big-endian
 code and data.  This option should be used with care as producing
-mixed-endian binary files is frought with danger.
+mixed-endian binary files is fraught with danger.
 
 @end table
 
@@ -328,7 +328,7 @@ instructions.
 
 @item unknown instruction @samp{...}
 This message is produced when the assembler encounters an instruction
-which it does not recognise.
+which it does not recognize.
 
 @item only the NOP instruction can be issued in parallel on the m32r
 This message is produced when the assembler encounters a parallel
diff --git a/gas/doc/c-m68k.texi b/gas/doc/c-m68k.texi
index d4da2a1ea45..0f8bb7853ef 100644
--- a/gas/doc/c-m68k.texi
+++ b/gas/doc/c-m68k.texi
@@ -284,7 +284,7 @@ The following addressing modes are understood:
 
 @item Address Register
 @samp{%a0} through @samp{%a7}@*
-@samp{%a7} is also known as @samp{%sp}, i.e. the Stack Pointer.  @code{%a6}
+@samp{%a7} is also known as @samp{%sp}, i.e., the Stack Pointer.  @code{%a6}
 is also known as @samp{%fp}, the Frame Pointer.
 
 @item Address Register Indirect
@@ -346,7 +346,7 @@ The following additional addressing modes are understood:
 @table @dfn
 @item Address Register Indirect
 @samp{(%a0)} through @samp{(%a7)}@* 
-@samp{%a7} is also known as @samp{%sp}, i.e. the Stack Pointer.  @code{%a6}
+@samp{%a7} is also known as @samp{%sp}, i.e., the Stack Pointer.  @code{%a6}
 is also known as @samp{%fp}, the Frame Pointer.
 
 @item Address Register Postincrement
@@ -445,11 +445,11 @@ This directive is identical to a @code{.space} directive.
 
 @cindex @code{arch} directive, M680x0
 @item .arch @var{name}
-Select the target architecture and extension features.  Valid valuse
+Select the target architecture and extension features.  Valid values
 for @var{name} are the same as for the @option{-march} command line
 option.  This directive cannot be specified after
 any instructions have been assembled.  If it is given multiple times,
-or in conjuction with the @option{-march} option, all uses must be for
+or in conjunction with the @option{-march} option, all uses must be for
 the same architecture and extension set.
 
 @cindex @code{cpu} directive, M680x0
@@ -458,7 +458,7 @@ Select the target cpu.  Valid valuse
 for @var{name} are the same as for the @option{-mcpu} command line
 option.  This directive cannot be specified after
 any instructions have been assembled.  If it is given multiple times,
-or in conjuction with the @option{-mopt} option, all uses must be for
+or in conjunction with the @option{-mopt} option, all uses must be for
 the same cpu.
 
 @end table
diff --git a/gas/doc/c-mmix.texi b/gas/doc/c-mmix.texi
index 8e47fa4a979..257e3a69d8a 100644
--- a/gas/doc/c-mmix.texi
+++ b/gas/doc/c-mmix.texi
@@ -530,7 +530,7 @@ Operand syntax is a bit stricter with @code{@value{AS}} than
 must write @code{addu $1,$2,3}.
 
 You can't LOC to a lower address than those already visited
-(i.e. ``backwards'').
+(i.e., ``backwards'').
 
 A LOC directive must come before any emitted code.
 
diff --git a/gas/doc/c-pdp11.texi b/gas/doc/c-pdp11.texi
index d714b28343a..78f2cf41f63 100644
--- a/gas/doc/c-pdp11.texi
+++ b/gas/doc/c-pdp11.texi
@@ -311,7 +311,7 @@ an immediate constants, while in BSD syntax the character for this
 purpose is @code{$}.
 
 @cindex PDP-11 general-purpose register syntax
-eneral-purpose registers are named @code{r0} through @code{r7}.
+general-purpose registers are named @code{r0} through @code{r7}.
 Mnemonic alternatives for @code{r6} and @code{r7} are @code{sp} and
 @code{pc}, respectively.
 
diff --git a/gas/doc/c-ppc.texi b/gas/doc/c-ppc.texi
index 08b2271d125..b5e26fd0a8d 100644
--- a/gas/doc/c-ppc.texi
+++ b/gas/doc/c-ppc.texi
@@ -95,10 +95,10 @@ Allow symbolic names for registers.
 Do not allow symbolic names for registers.
 
 @item -mrelocatable
-Support for GCC's -mrelocatble option.
+Support for GCC's -mrelocatable option.
 
 @item -mrelocatable-lib
-Support for GCC's -mrelocatble-lib option.
+Support for GCC's -mrelocatable-lib option.
 
 @item -memb
 Set PPC_EMB bit in ELF flags.
diff --git a/gas/doc/c-tic54x.texi b/gas/doc/c-tic54x.texi
index 374def39e63..85b2fdad151 100644
--- a/gas/doc/c-tic54x.texi
+++ b/gas/doc/c-tic54x.texi
@@ -32,7 +32,7 @@
 
 @cindex options, TIC54X
 @cindex TIC54X options
-The TMS320C54x version of @code{@value{AS}} has a few machine-dependent options.
+The TMS320C54X version of @code{@value{AS}} has a few machine-dependent options.
 
 @cindex @samp{-mfar-mode} option, far-mode
 @cindex @samp{-mf} option, far-mode
@@ -450,7 +450,7 @@ points to the word that contains the specified field.
 @itemx .def @var{symbol} [,...,@var{symbol_n}]
 @itemx .ref @var{symbol} [,...,@var{symbol_n}]
 @code{.def} nominally identifies a symbol defined in the current file
-and availalbe to other files.  @code{.ref} identifies a symbol used in
+and available to other files.  @code{.ref} identifies a symbol used in
 the current file but defined elsewhere.  Both map to the standard
 @code{.global} directive.
 
@@ -685,7 +685,7 @@ values are accepted, the op is ignored.
 
 @cindex TIC54X-specific macros
 @cindex macros, TIC54X
-Macros do not require explicit dereferencing of arguments (i.e. \ARG).  
+Macros do not require explicit dereferencing of arguments (i.e., \ARG).  
 
 During macro expansion, the macro parameters are converted to subsyms.
 If the number of arguments passed the macro invocation exceeds the
diff --git a/gas/doc/c-v850.texi b/gas/doc/c-v850.texi
index 445be057ef3..d899d5df2a2 100644
--- a/gas/doc/c-v850.texi
+++ b/gas/doc/c-v850.texi
@@ -267,7 +267,7 @@ the immediate operand field of the given instruction.  For example:
 
 computes the difference between the address of labels 'here' and
 'there', takes the upper 16 bits of this difference, shifts it down 16
-bits and then mutliplies it by the lower 16 bits in register 5, putting
+bits and then multiplies it by the lower 16 bits in register 5, putting
 the result into register 6. 
 
 @cindex @code{lo} pseudo-op, V850
diff --git a/gas/doc/c-xtensa.texi b/gas/doc/c-xtensa.texi
index 33035ad8b48..2a1fb54b0b0 100644
--- a/gas/doc/c-xtensa.texi
+++ b/gas/doc/c-xtensa.texi
@@ -428,7 +428,7 @@ The @code{L8UI} machine instruction can only be used with immediate
 offsets in the range from 0 to 255. The @code{L16SI} and @code{L16UI}
 machine instructions can only be used with offsets from 0 to 510.  The
 @code{L32I} machine instruction can only be used with offsets from 0 to
-1020.  A load offset outside these ranges can be materalized with
+1020.  A load offset outside these ranges can be materialized with
 an @code{L32R} instruction if the destination register of the load
 is different than the source address register.  For example:
 
@@ -489,7 +489,7 @@ is assembled into the following:
 @cindex Xtensa directives
 @cindex directives, Xtensa
 
-The Xtensa assember supports a region-based directive syntax:
+The Xtensa assembler supports a region-based directive syntax:
 
 @smallexample
     .begin @var{directive} [@var{options}]
diff --git a/gas/doc/c-z80.texi b/gas/doc/c-z80.texi
index 76e8410840a..c52268a8cfb 100644
--- a/gas/doc/c-z80.texi
+++ b/gas/doc/c-z80.texi
@@ -59,7 +59,7 @@ Treat undocumented z80-instructions that do not work on R800 as errors.
 @item -r800
 Produce code for the R800 processor. The assembler does not support
 undocumented instructions for the R800.
-In line with common practice, @code{@value{AS}} uses Z80 instriction names
+In line with common practice, @code{@value{AS}} uses Z80 instruction names
 for the R800 processor, as far as they exist.
 @end table
 
@@ -105,7 +105,7 @@ A backslash @samp{\} is an ordinary character for the Z80 assembler.
 @cindex single quote, Z80
 @cindex Z80 '
 The single quote @samp{'} must be followed by a closing quote. If there
-is one character inbetween, it is a character constant, otherwise it is
+is one character in between, it is a character constant, otherwise it is
 a string constant.
 
 @node Z80-Regs
@@ -114,7 +114,7 @@ a string constant.
 @cindex register names, Z80
 
 The registers are referred to with the letters assigned to them by
-Zilog. In addition @command{@value{AS}} recognises @samp{ixl} and 
+Zilog. In addition @command{@value{AS}} recognizes @samp{ixl} and 
 @samp{ixh} as the least and most significant octet in @samp{ix}, and
 similarly @samp{iyl} and  @samp{iyh} as parts of @samp{iy}. 
 
@@ -171,7 +171,7 @@ overflow.
 @item ds @var{count}[, @var{value}]
 @itemx defs @var{count}[, @var{value}]
 @c Synonyms for @code{ds.b}, 
-@c which should have been described elsewhre
+@c which should have been described elsewhere
 Fill @var{count} bytes in the object file with @var{value}, if
 @var{value} is omitted it defaults to zero.
 
@@ -188,7 +188,7 @@ This is a normal instruction on Z80, and not an assembler directive.
 A synonym for @xref{Section}, no second argument should be given. 
 @ignore
 
-The following attributes will possibly be recognised in the future
+The following attributes will possibly be recognized in the future
 @table @code
 @item abs
 The section is to be absolute. @code{@value{AS}} will issue an error
@@ -212,7 +212,7 @@ The section is marked as read only.
 
 @node Z80 Opcodes
 @section Opcodes
-In line with commmon practice Z80 mnonics are used for both the Z80 and
+In line with common practice, Z80 mnemonics are used for both the Z80 and
 the R800. 
 
 In many instructions it is possible to use one of the half index
diff --git a/gas/doc/internals.texi b/gas/doc/internals.texi
index dffdb1e04fa..16a64637e31 100644
--- a/gas/doc/internals.texi
+++ b/gas/doc/internals.texi
@@ -838,7 +838,7 @@ GAS will call @code{md_parse_option} whenever @code{getopt} returns an
 unrecognized code, presumably indicating a special code value which appears in
 @code{md_longopts}.  This function should return non-zero if it handled the
 option and zero otherwise.  There is no need to print a message about an option
-not being recognised.  This will be handled by the generic code.
+not being recognized.  This will be handled by the generic code.
 
 GAS will call @code{md_show_usage} when a usage message is printed; it should
 print a description of the machine specific options. @code{md_after_pase_args},
@@ -891,7 +891,7 @@ If this macro is defined, GAS will use it instead of @code{comment_chars}.
 @cindex tc_symbol_chars
 If this macro is defined, it is a pointer to a null terminated list of
 characters which may appear in an operand.  GAS already assumes that all
-alphanumberic characters, and @samp{$}, @samp{.}, and @samp{_} may appear in an
+alphanumeric characters, and @samp{$}, @samp{.}, and @samp{_} may appear in an
 operand (see @samp{symbol_chars} in @file{app.c}).  This macro may be defined
 to treat additional characters as appearing in an operand.  This affects the
 way in which GAS removes whitespace before passing the string to
@@ -1609,7 +1609,7 @@ symbol's flags.
 
 @item obj_clear_weak_hook
 @cindex obj_clear_weak_hook
-If you define this macro, @code{S_CLEAR_WEAKREFD} will call it after clearning
+If you define this macro, @code{S_CLEAR_WEAKREFD} will call it after cleaning
 the @code{weakrefd} flag, but before modifying any other flags.
 
 @item obj_frob_file
diff --git a/gprof/ChangeLog b/gprof/ChangeLog
index c98e984928a..3161cbea49d 100644
--- a/gprof/ChangeLog
+++ b/gprof/ChangeLog
@@ -1,3 +1,7 @@
+2006-07-24  Ralk Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* gprof.texi: Fix some typos.
+
 2006-06-07  Joseph S. Myers  <joseph@codesourcery.com>
 
 	* po/Make-in (pdf, ps): New dummy targets.
diff --git a/gprof/gprof.texi b/gprof/gprof.texi
index a81b109ec52..3c141d9aa29 100644
--- a/gprof/gprof.texi
+++ b/gprof/gprof.texi
@@ -442,7 +442,7 @@ The order of these options does not matter.
 
 @menu
 * Output Options::      Controlling @code{gprof}'s output style
-* Analysis Options::    Controlling how @code{gprof} analyses its data
+* Analysis Options::    Controlling how @code{gprof} analyzes its data
 * Miscellaneous Options::
 * Deprecated Options::  Options you no longer need to use, but which
                             have been retained for compatibility
@@ -559,7 +559,7 @@ Normally, @code{gprof} prints annotated source files
 to standard-output.  If this option is specified,
 annotated source for a file named @file{path/@var{filename}}
 is generated in the file @file{@var{filename}-ann}.  If the underlying
-filesystem would truncate @file{@var{filename}-ann} so that it
+file system would truncate @file{@var{filename}-ann} so that it
 overwrites the original @file{@var{filename}}, @code{gprof} generates
 annotated source in the file @file{@var{filename}.ann} instead (if the
 original file name has an extension, that extension is @emph{replaced}
@@ -654,7 +654,7 @@ The @samp{-a} option causes @code{gprof} to suppress the printing of
 statically declared (private) functions.  (These are functions whose
 names are not listed as global, and which are not visible outside the
 file/function/block where they were defined.)  Time spent in these
-functions, calls to/from them, etc, will all be attributed to the
+functions, calls to/from them, etc., will all be attributed to the
 function that was loaded directly before it in the executable file.
 @c This is compatible with Unix @code{gprof}, but a bad idea.  
 This option affects both the flat profile and the call graph.
@@ -1685,7 +1685,7 @@ Because @code{gprof} can only report call times and counts by function,
 the best way to get finer-grained information on where the program
 is spending its time is to re-factor large functions into sequences
 of calls to smaller ones.  Beware however that this can introduce
-artifical hot spots since compiling with @samp{-pg} adds a significant
+artificial hot spots since compiling with @samp{-pg} adds a significant
 overhead to function calls.  An alternative solution is to use a
 non-intrusive profiler, e.g.@: oprofile.
 
@@ -1722,7 +1722,7 @@ gprof fastprog gmon.sum
 @end example
 
 If your program is completely deterministic, all the call counts
-will be simple multiples of 100 (i.e. a function called once in
+will be simple multiples of 100 (i.e., a function called once in
 each run will appear with a call count of 100).
 
 @end table
diff --git a/ld/ChangeLog b/ld/ChangeLog
index 407d4afffdc..c78c52974dd 100644
--- a/ld/ChangeLog
+++ b/ld/ChangeLog
@@ -1,3 +1,8 @@
+2006-07-24  Ralk Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* ld.texinfo: Fix spelling mistakes.
+	* ldint.texinfo: Likewise.
+
 2006-07-23  Sonal Santan  <sonal.santan@xilinx.com>
 
 	* ldlang.c (lang_section_bst): New structure for sorting sections
diff --git a/ld/ld.texinfo b/ld/ld.texinfo
index 687f19c78c7..f3d95805188 100644
--- a/ld/ld.texinfo
+++ b/ld/ld.texinfo
@@ -1461,7 +1461,7 @@ SunOS, the linker will form a runtime search patch out of all the
 runtime search path will be formed exclusively using the @option{-rpath}
 options, ignoring the @option{-L} options.  This can be useful when using
 gcc, which adds many @option{-L} options which may be on NFS mounted
-filesystems.
+file systems.
 
 For compatibility with other ELF linkers, if the @option{-R} option is
 followed by a directory name, rather than a file name, it is treated as
@@ -2037,9 +2037,9 @@ symbols before they are exported.
 
 @kindex --large-address-aware
 @item --large-address-aware
-If given, the appropriate bit in the ``Charateristics'' field of the COFF
+If given, the appropriate bit in the ``Characteristics'' field of the COFF
 header is set to indicate that this executable supports virtual addresses
-greater than 2 gigabytes.  This should be used in conjuction with the /3GB
+greater than 2 gigabytes.  This should be used in conjunction with the /3GB
 or /USERVA=@var{value} megabytes switch in the ``[operating systems]''
 section of the BOOT.INI.  Otherwise, this bit has no effect.
 [This option is specific to PE targeted ports of the linker]
@@ -2681,7 +2681,7 @@ setting afterwards.
 
 @item OUTPUT(@var{filename})
 @kindex OUTPUT(@var{filename})
-@cindex output file name in linker scripot
+@cindex output file name in linker script
 The @code{OUTPUT} command names the output file.  Using
 @code{OUTPUT(@var{filename})} in the linker script is exactly like using
 @samp{-o @var{filename}} on the command line (@pxref{Options,,Command
@@ -5200,7 +5200,7 @@ page of memory, and changes them to use the 8 bit address form.
 the top page of memory).
 
 @item system control instructions
-@command{ld} finds all @code{ldc.w, stc.w} instrcutions which use the 
+@command{ld} finds all @code{ldc.w, stc.w} instructions which use the 
 32 bit absolute address form, but refer to the top page of memory, and 
 changes them to use 16 bit address form.
 (That is: the linker turns @samp{ldc.w @code{@@}@var{aa}:32,ccr} into
@@ -5345,7 +5345,7 @@ point to the function trampoline.
 @cindex ARM interworking support
 @kindex --support-old-code
 For the ARM, @command{ld} will generate code stubs to allow functions calls
-betweem ARM and Thumb code.  These stubs only work with code that has
+between ARM and Thumb code.  These stubs only work with code that has
 been compiled and assembled with the @samp{-mthumb-interwork} command
 line option.  If it is necessary to link with old ARM object files or
 libraries, which have not been compiled with the -mthumb-interwork
@@ -5745,7 +5745,7 @@ header format depends on the default specified by the specific target.
 @section @command{ld} and WIN32 (cygwin/mingw)
 
 This section describes some of the win32 specific @command{ld} issues. 
-See @ref{Options,,Command Line Options} for detailed decription of the
+See @ref{Options,,Command Line Options} for detailed description of the
 command line options mentioned here.
 
 @table @emph
@@ -5822,8 +5822,8 @@ The optional @code{LIBRARY <name>} command indicates the @emph{internal}
 name of the output DLL. If @samp{<name>} does not include a suffix,
 the default library suffix, @samp{.DLL} is appended.
 
-When the .DEF file is used to build an application. rather than a
-library, the @code{NAME <name>} command shoud be used instead of
+When the .DEF file is used to build an application, rather than a
+library, the @code{NAME <name>} command should be used instead of
 @code{LIBRARY}. If @samp{<name>} does not include a suffix, the default
 executable suffix, @samp{.EXE} is appended. 
 
@@ -5917,7 +5917,7 @@ code the header must declare them as dllimport.  There are a number
 of idioms that are typically used to do this; often client code can 
 omit the __declspec() declaration completely.  See
 @samp{--enable-auto-import} and @samp{automatic data imports} for more
-imformation.
+information.
 @end table 
 
 @cindex automatic data imports
@@ -5929,7 +5929,7 @@ issue.  This increases the effort necessary to port existing Un*x
 code to these platforms, especially for large
 c++ libraries and applications.  The auto-import feature, which was
 initially provided by Paul Sokolovsky, allows one to omit the 
-decorations to archieve a behavior that conforms to that on POSIX/Un*x
+decorations to achieve a behavior that conforms to that on POSIX/Un*x
 platforms. This feature is enabled with the @samp{--enable-auto-import} 
 command-line option, although it is enabled by default on cygwin/mingw.
 The @samp{--enable-auto-import} option itself now serves mainly to
@@ -5973,7 +5973,7 @@ enabled as needed.
 The cygwin/mingw ports of @command{ld} support the direct linking,
 including data symbols, to a dll without the usage of any import
 libraries.  This is much faster and uses much less memory than does the
-traditional import library method, expecially when linking large
+traditional import library method, especially when linking large
 libraries or applications.  When @command{ld} creates an import lib, each 
 function or variable exported from the dll is stored in its own bfd, even 
 though a single bfd could contain many exports.  The overhead involved in 
@@ -6454,7 +6454,7 @@ a chance to make a mistake.
 
 Even if the problem you experience is a fatal signal, you should still
 say so explicitly.  Suppose something strange is going on, such as, your
-copy of @command{ld} is out of synch, or you have encountered a bug in the
+copy of @command{ld} is out of sync, or you have encountered a bug in the
 C library on your system.  (This has happened!)  Your copy might crash
 and ours would not.  If you told us to expect a crash, then when ours
 fails to crash, we would know that the bug was not happening for us.  If
diff --git a/ld/ldint.texinfo b/ld/ldint.texinfo
index dc6e9a65ef3..597deb2e782 100644
--- a/ld/ldint.texinfo
+++ b/ld/ldint.texinfo
@@ -179,10 +179,10 @@ as well as some conventional shell variables interpreted by the
 @item SCRIPT_NAME
 This is the name of the @file{scripttempl} script to use.  If
 @code{SCRIPT_NAME} is set to @var{script}, @file{genscripts.sh} will use
-the script @file{scriptteml/@var{script}.sc}.
+the script @file{scripttempl/@var{script}.sc}.
 
 @item TEMPLATE_NAME
-This is the name of the @file{emultemlp} script to use.  If
+This is the name of the @file{emultempl} script to use.  If
 @code{TEMPLATE_NAME} is set to @var{template}, @file{genscripts.sh} will
 use the script @file{emultempl/@var{template}.em}.  If this variable is
 not set, the default value is @samp{generic}.
@@ -290,7 +290,7 @@ option.  The output has an extension of
 The @file{scripttempl} script is only invoked with @code{LD_FLAG} set to
 this value if @code{GENERATE_COMBRELOC_SCRIPT} is defined in the
 @file{emulparams} file or if @code{SCRIPT_NAME} is @code{elf} and
-@code{GENERATE_SHLIB_SCRIPT} is defined in the @file{emulparms} file.
+@code{GENERATE_SHLIB_SCRIPT} is defined in the @file{emulparams} file.
 The @file{emultempl} script must arrange to use this script at the
 appropriate time, normally when the linker is invoked with the @code{-shared
 -z combreloc} option.  The output has an extension of @file{.xsc}.
@@ -644,7 +644,7 @@ Motivation
 The obvious and only way to get rid of dllimport insanity is 
 to make client access variable directly in the DLL, bypassing 
 the extra dereference imposed by ordinary DLL runtime linking.
-I.e., whenever client contains someting like
+I.e., whenever client contains something like
 
 @code{mov dll_var,%eax,}
 
@@ -653,7 +653,7 @@ into loaded DLL. The aim is to make OS loader do so, and than
 make ld help with that.  Import section of PE made following 
 way: there's a vector of structures each describing imports 
 from particular DLL. Each such structure points to two other 
-parellel vectors: one holding imported names, and one which 
+parallel vectors: one holding imported names, and one which 
 will hold address of corresponding imported name. So, the 
 solution is de-vectorize these structures, making import 
 locations be sparse and pointing directly into code.