bfd: merge doc subdir up a level

This avoids a recursive make into the doc subdir and speeds up the
build slightly.  It also allows for more parallelism.

3 files changed, 156 insertions, 1088 deletions

diff --git a/bfd/doc/Makefile.am b/bfd/doc/Makefile.am
deleted file mode 100644
index 032e6e32971..00000000000
--- a/bfd/doc/Makefile.am
+++ /dev/null
@@ -1,142 +0,0 @@
-## Process this file with automake to generate Makefile.in
-#
-#   Copyright (C) 2012-2022 Free Software Foundation, Inc.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-# 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with this program; see the file COPYING3.  If not see
-# <http://www.gnu.org/licenses/>.
-#
-
-AUTOMAKE_OPTIONS = info-in-builddir no-texinfo.tex foreign
-
-DOCFILES = aoutx.texi  archive.texi archures.texi \
-	bfdt.texi  cache.texi coffcode.texi \
-	corefile.texi elf.texi elfcode.texi  format.texi \
-	libbfd.texi bfdwin.texi bfdio.texi \
-	opncls.texi  reloc.texi  section.texi  \
-	syms.texi  targets.texi init.texi hash.texi linker.texi \
-	mmo.texi \
-	bfdver.texi
-
-# SRCDOC, SRCPROT, SRCIPROT only used to sidestep Sun Make bug in interaction 
-# between VPATH and suffix rules.  If you use GNU Make, perhaps other Makes,
-# you don't need these three:
-SRCDOC = $(srcdir)/../aoutx.h  $(srcdir)/../archive.c \
-	$(srcdir)/../archures.c $(srcdir)/../bfd.c \
-	$(srcdir)/../bfdio.c $(srcdir)/../bfdwin.c \
-	$(srcdir)/../cache.c $(srcdir)/../coffcode.h \
-	$(srcdir)/../corefile.c $(srcdir)/../elf.c \
-	$(srcdir)/../elfcode.h  $(srcdir)/../format.c \
-	$(srcdir)/../libbfd.c $(srcdir)/../opncls.c \
-	$(srcdir)/../reloc.c  $(srcdir)/../section.c \
-	$(srcdir)/../syms.c  $(srcdir)/../targets.c \
-	$(srcdir)/../hash.c $(srcdir)/../linker.c \
-	$(srcdir)/../mmo.c
-
-SRCPROT = $(srcdir)/../archive.c $(srcdir)/../archures.c \
-	$(srcdir)/../bfd.c $(srcdir)/../coffcode.h $(srcdir)/../corefile.c \
-	$(srcdir)/../format.c $(srcdir)/../libbfd.c \
-	$(srcdir)/../bfdio.c $(srcdir)/../bfdwin.c \
-	$(srcdir)/../opncls.c $(srcdir)/../reloc.c \
-	$(srcdir)/../section.c $(srcdir)/../syms.c \
-	$(srcdir)/../targets.c $(srcdir)/../init.c
-
-SRCIPROT = $(srcdir)/../cache.c $(srcdir)/../libbfd.c \
-	$(srcdir)/../bfdio.c $(srcdir)/../bfdwin.c \
-	$(srcdir)/../reloc.c $(srcdir)/../cpu-h8300.c \
-	$(srcdir)/../cpu-i960.c $(srcdir)/../archures.c \
-	$(srcdir)/../init.c
-
-TEXIDIR = $(srcdir)/../../texinfo/fsf
-
-info_TEXINFOS = bfd.texi
-bfd_TEXINFOS = $(DOCFILES) bfdsumm.texi
-
-AM_MAKEINFOFLAGS = --no-split
-
-MKDOC = chew$(EXEEXT_FOR_BUILD)
-
-AM_CPPFLAGS = -I.. -I$(srcdir)/.. -I$(srcdir)/../../include \
-	-I$(srcdir)/../../intl -I../../intl
-
-$(MKDOC): chew.stamp ; @true
-chew.stamp: $(srcdir)/chew.c
-	$(CC_FOR_BUILD) -o chw$$$$$(EXEEXT_FOR_BUILD) $(CFLAGS_FOR_BUILD) \
-	  $(LDFLAGS_FOR_BUILD) $(H_CFLAGS) $(AM_CPPFLAGS) $(srcdir)/chew.c; \
-	$(SHELL) $(srcdir)/../../move-if-change \
-	  chw$$$$$(EXEEXT_FOR_BUILD) $(MKDOC); \
-	touch $@
-
-# We can't replace these rules with an implicit rule, because
-# makes without VPATH support couldn't find the .h files in `..'.
-
-# We do not depend on chew directly so that we can distribute the info
-# files, and permit people to rebuild them, without requiring the makeinfo
-# program.  If somebody tries to rebuild info, but none of the .texi files
-# have changed, then nothing will be rebuilt.
-
-REGEN_TEXI = \
-	( \
-	set -e; \
-	./$(MKDOC) -f $(srcdir)/doc.str < $< > $@.tmp; \
-	texi=$@; \
-	texi=$${texi%.stamp}.texi; \
-	test -e $$texi || test ! -f $(srcdir)/$$texi || $(LN_S) $(srcdir)/$$texi .; \
-	$(SHELL) $(srcdir)/../../move-if-change $@.tmp $$texi; \
-	touch $@; \
-	)
-
-.PRECIOUS: %.stamp
-%.texi: %.stamp ; @true
-%.stamp: $(srcdir)/../%.h $(srcdir)/doc.str $(MKDOC)
-	$(AM_V_GEN)$(REGEN_TEXI)
-%.stamp: $(srcdir)/../%.c $(srcdir)/doc.str $(MKDOC)
-	$(AM_V_GEN)$(REGEN_TEXI)
-
-# Avoid the %.stamp generating a builddir/bfd.texi that overrides the srcdir/.
-bfd.texi bfd.stamp: ; $(AM_V_at)touch $@
-
-# We use bfdt.texi, rather than bfd.texi, to avoid conflicting with
-# bfd.texi on an 8.3 filesystem.
-bfdt.stamp: $(srcdir)/../bfd.c $(srcdir)/doc.str $(MKDOC)
-	$(AM_V_GEN)$(REGEN_TEXI)
-
-bfdver.texi: $(srcdir)/Makefile.in
-	@echo "creating $@"; \
-	echo "@set VERSION $(VERSION)" > bfdver.texi; \
-	if test -n "$(PKGVERSION)"; then \
-	  echo "@set VERSION_PACKAGE $(PKGVERSION)" >> bfdver.texi; \
-	fi; \
-	echo "@set UPDATED `date '+%B %Y'`" >> bfdver.texi; \
-	if test -n "$(REPORT_BUGS_TEXI)"; then \
-	  echo "@set BUGURL $(REPORT_BUGS_TEXI)" >> bfdver.texi; \
-	fi
-
-noinst_TEXINFOS = bfdint.texi
-
-MOSTLYCLEANFILES = $(MKDOC) *.o *.stamp
-
-DISTCLEANFILES = bfd.?? bfd.??? bfd.h libbfd.h libcoff.h texput.log
-
-MAINTAINERCLEANFILES = $(DOCFILES)
-
-# We want install to imply install-info as per GNU standards, despite the
-# cygnus option.
-install: install-info
-
-html-local: bfd/index.html
-bfd/index.html: bfd.texi $(bfd_TEXINFOS)
-	$(AM_V_at)$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) \
-	  --split=node -I$(srcdir) $(srcdir)/bfd.texi
-
-MAINTAINERCLEANFILES += bfd.info
diff --git a/bfd/doc/Makefile.in b/bfd/doc/Makefile.in
deleted file mode 100644
index 1caede02034..00000000000
--- a/bfd/doc/Makefile.in
+++ /dev/null
@@ -1,946 +0,0 @@
-# Makefile.in generated by automake 1.15.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2017 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-#   Copyright (C) 2012-2022 Free Software Foundation, Inc.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-# 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with this program; see the file COPYING3.  If not see
-# <http://www.gnu.org/licenses/>.
-#
-VPATH = @srcdir@
-am__is_gnu_make = { \
-  if test -z '$(MAKELEVEL)'; then \
-    false; \
-  elif test -n '$(MAKE_HOST)'; then \
-    true; \
-  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
-    true; \
-  else \
-    false; \
-  fi; \
-}
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-target_triplet = @target@
-subdir = doc
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \
-	$(top_srcdir)/../config/bfd64.m4 \
-	$(top_srcdir)/../config/depstand.m4 \
-	$(top_srcdir)/../config/gettext-sister.m4 \
-	$(top_srcdir)/../config/jobserver.m4 \
-	$(top_srcdir)/../config/largefile.m4 \
-	$(top_srcdir)/../config/lead-dot.m4 \
-	$(top_srcdir)/../config/nls.m4 \
-	$(top_srcdir)/../config/override.m4 \
-	$(top_srcdir)/../config/plugins.m4 \
-	$(top_srcdir)/../config/po.m4 \
-	$(top_srcdir)/../config/progtest.m4 \
-	$(top_srcdir)/../config/zlib.m4 $(top_srcdir)/../libtool.m4 \
-	$(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \
-	$(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \
-	$(top_srcdir)/bfd.m4 $(top_srcdir)/warning.m4 \
-	$(top_srcdir)/acinclude.m4 $(top_srcdir)/version.m4 \
-	$(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-AM_V_DVIPS = $(am__v_DVIPS_@AM_V@)
-am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@)
-am__v_DVIPS_0 = @echo "  DVIPS   " $@;
-am__v_DVIPS_1 = 
-AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@)
-am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@)
-am__v_MAKEINFO_0 = @echo "  MAKEINFO" $@;
-am__v_MAKEINFO_1 = 
-AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@)
-am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@)
-am__v_INFOHTML_0 = @echo "  INFOHTML" $@;
-am__v_INFOHTML_1 = 
-AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@)
-am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@)
-am__v_TEXI2DVI_0 = @echo "  TEXI2DVI" $@;
-am__v_TEXI2DVI_1 = 
-AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@)
-am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@)
-am__v_TEXI2PDF_0 = @echo "  TEXI2PDF" $@;
-am__v_TEXI2PDF_1 = 
-AM_V_texinfo = $(am__v_texinfo_@AM_V@)
-am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@)
-am__v_texinfo_0 = -q
-am__v_texinfo_1 = 
-AM_V_texidevnull = $(am__v_texidevnull_@AM_V@)
-am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@)
-am__v_texidevnull_0 = > /dev/null
-am__v_texidevnull_1 = 
-INFO_DEPS = bfd.info
-am__TEXINFO_TEX_DIR = $(srcdir)
-DVIS = bfd.dvi
-PDFS = bfd.pdf
-PSS = bfd.ps
-HTMLS = bfd.html
-TEXINFOS = bfd.texi
-TEXI2DVI = texi2dvi
-TEXI2PDF = $(TEXI2DVI) --pdf --batch
-MAKEINFOHTML = $(MAKEINFO) --html
-AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
-DVIPS = dvips
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__installdirs = "$(DESTDIR)$(infodir)"
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(bfd_TEXINFOS) $(srcdir)/Makefile.in \
-	$(top_srcdir)/../mkinstalldirs
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BFD_HOSTPTR_T = @BFD_HOSTPTR_T@
-BFD_HOST_64BIT_LONG = @BFD_HOST_64BIT_LONG@
-BFD_HOST_64BIT_LONG_LONG = @BFD_HOST_64BIT_LONG_LONG@
-BFD_HOST_64_BIT = @BFD_HOST_64_BIT@
-BFD_HOST_64_BIT_DEFINED = @BFD_HOST_64_BIT_DEFINED@
-BFD_HOST_U_64_BIT = @BFD_HOST_U_64_BIT@
-CATALOGS = @CATALOGS@
-CATOBJEXT = @CATOBJEXT@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_FOR_BUILD = @CC_FOR_BUILD@
-CFLAGS = @CFLAGS@
-COREFILE = @COREFILE@
-COREFLAG = @COREFLAG@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DATADIRNAME = @DATADIRNAME@
-DEBUGDIR = @DEBUGDIR@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
-FGREP = @FGREP@
-GENCAT = @GENCAT@
-GMSGFMT = @GMSGFMT@
-GREP = @GREP@
-HDEFINES = @HDEFINES@
-INCINTL = @INCINTL@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTOBJEXT = @INSTOBJEXT@
-LARGEFILE_CPPFLAGS = @LARGEFILE_CPPFLAGS@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBINTL = @LIBINTL@
-LIBINTL_DEP = @LIBINTL_DEP@
-LIBM = @LIBM@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MKINSTALLDIRS = @MKINSTALLDIRS@
-MSGFMT = @MSGFMT@
-MSGMERGE = @MSGMERGE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NO_WERROR = @NO_WERROR@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKGVERSION = @PKGVERSION@
-POSUB = @POSUB@
-RANLIB = @RANLIB@
-REPORT_BUGS_TEXI = @REPORT_BUGS_TEXI@
-REPORT_BUGS_TO = @REPORT_BUGS_TO@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHARED_LDFLAGS = @SHARED_LDFLAGS@
-SHARED_LIBADD = @SHARED_LIBADD@
-SHELL = @SHELL@
-STRIP = @STRIP@
-TDEFINES = @TDEFINES@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-WARN_CFLAGS = @WARN_CFLAGS@
-WARN_CFLAGS_FOR_BUILD = @WARN_CFLAGS_FOR_BUILD@
-WARN_WRITE_STRINGS = @WARN_WRITE_STRINGS@
-XGETTEXT = @XGETTEXT@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-all_backends = @all_backends@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bfd64_libs = @bfd64_libs@
-bfd_backends = @bfd_backends@
-bfd_default_target_size = @bfd_default_target_size@
-bfd_file_ptr = @bfd_file_ptr@
-bfd_machines = @bfd_machines@
-bfd_ufile_ptr = @bfd_ufile_ptr@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-havevecs = @havevecs@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_noncanonical = @host_noncanonical@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-lt_cv_dlopen_libs = @lt_cv_dlopen_libs@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-runstatedir = @runstatedir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-supports_plugins = @supports_plugins@
-sysconfdir = @sysconfdir@
-target = @target@
-target_alias = @target_alias@
-target_cpu = @target_cpu@
-target_noncanonical = @target_noncanonical@
-target_os = @target_os@
-target_vendor = @target_vendor@
-tdefaults = @tdefaults@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-wordsize = @wordsize@
-zlibdir = @zlibdir@
-zlibinc = @zlibinc@
-AUTOMAKE_OPTIONS = info-in-builddir no-texinfo.tex foreign
-DOCFILES = aoutx.texi  archive.texi archures.texi \
-	bfdt.texi  cache.texi coffcode.texi \
-	corefile.texi elf.texi elfcode.texi  format.texi \
-	libbfd.texi bfdwin.texi bfdio.texi \
-	opncls.texi  reloc.texi  section.texi  \
-	syms.texi  targets.texi init.texi hash.texi linker.texi \
-	mmo.texi \
-	bfdver.texi
-
-
-# SRCDOC, SRCPROT, SRCIPROT only used to sidestep Sun Make bug in interaction 
-# between VPATH and suffix rules.  If you use GNU Make, perhaps other Makes,
-# you don't need these three:
-SRCDOC = $(srcdir)/../aoutx.h  $(srcdir)/../archive.c \
-	$(srcdir)/../archures.c $(srcdir)/../bfd.c \
-	$(srcdir)/../bfdio.c $(srcdir)/../bfdwin.c \
-	$(srcdir)/../cache.c $(srcdir)/../coffcode.h \
-	$(srcdir)/../corefile.c $(srcdir)/../elf.c \
-	$(srcdir)/../elfcode.h  $(srcdir)/../format.c \
-	$(srcdir)/../libbfd.c $(srcdir)/../opncls.c \
-	$(srcdir)/../reloc.c  $(srcdir)/../section.c \
-	$(srcdir)/../syms.c  $(srcdir)/../targets.c \
-	$(srcdir)/../hash.c $(srcdir)/../linker.c \
-	$(srcdir)/../mmo.c
-
-SRCPROT = $(srcdir)/../archive.c $(srcdir)/../archures.c \
-	$(srcdir)/../bfd.c $(srcdir)/../coffcode.h $(srcdir)/../corefile.c \
-	$(srcdir)/../format.c $(srcdir)/../libbfd.c \
-	$(srcdir)/../bfdio.c $(srcdir)/../bfdwin.c \
-	$(srcdir)/../opncls.c $(srcdir)/../reloc.c \
-	$(srcdir)/../section.c $(srcdir)/../syms.c \
-	$(srcdir)/../targets.c $(srcdir)/../init.c
-
-SRCIPROT = $(srcdir)/../cache.c $(srcdir)/../libbfd.c \
-	$(srcdir)/../bfdio.c $(srcdir)/../bfdwin.c \
-	$(srcdir)/../reloc.c $(srcdir)/../cpu-h8300.c \
-	$(srcdir)/../cpu-i960.c $(srcdir)/../archures.c \
-	$(srcdir)/../init.c
-
-TEXIDIR = $(srcdir)/../../texinfo/fsf
-info_TEXINFOS = bfd.texi
-bfd_TEXINFOS = $(DOCFILES) bfdsumm.texi
-AM_MAKEINFOFLAGS = --no-split
-MKDOC = chew$(EXEEXT_FOR_BUILD)
-AM_CPPFLAGS = -I.. -I$(srcdir)/.. -I$(srcdir)/../../include \
-	-I$(srcdir)/../../intl -I../../intl
-
-
-# We can't replace these rules with an implicit rule, because
-# makes without VPATH support couldn't find the .h files in `..'.
-
-# We do not depend on chew directly so that we can distribute the info
-# files, and permit people to rebuild them, without requiring the makeinfo
-# program.  If somebody tries to rebuild info, but none of the .texi files
-# have changed, then nothing will be rebuilt.
-REGEN_TEXI = \
-	( \
-	set -e; \
-	./$(MKDOC) -f $(srcdir)/doc.str < $< > $@.tmp; \
-	texi=$@; \
-	texi=$${texi%.stamp}.texi; \
-	test -e $$texi || test ! -f $(srcdir)/$$texi || $(LN_S) $(srcdir)/$$texi .; \
-	$(SHELL) $(srcdir)/../../move-if-change $@.tmp $$texi; \
-	touch $@; \
-	)
-
-noinst_TEXINFOS = bfdint.texi
-MOSTLYCLEANFILES = $(MKDOC) *.o *.stamp
-DISTCLEANFILES = bfd.?? bfd.??? bfd.h libbfd.h libcoff.h texput.log
-MAINTAINERCLEANFILES = $(DOCFILES) bfd.info
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .dvi .ps
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign doc/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-bfd.info: bfd.texi $(bfd_TEXINFOS)
-	$(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \
-	rm -rf $$backupdir && mkdir $$backupdir && \
-	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
-	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
-	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
-	  done; \
-	else :; fi && \
-	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-	 -o $@ `test -f 'bfd.texi' || echo '$(srcdir)/'`bfd.texi; \
-	then \
-	  rc=0; \
-	else \
-	  rc=$$?; \
-	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
-	fi; \
-	rm -rf $$backupdir; exit $$rc
-
-bfd.dvi: bfd.texi $(bfd_TEXINFOS) 
-	$(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
-	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
-	$(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \
-	`test -f 'bfd.texi' || echo '$(srcdir)/'`bfd.texi
-
-bfd.pdf: bfd.texi $(bfd_TEXINFOS) 
-	$(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
-	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
-	$(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \
-	`test -f 'bfd.texi' || echo '$(srcdir)/'`bfd.texi
-
-bfd.html: bfd.texi $(bfd_TEXINFOS) 
-	$(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
-	$(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-	 -o $(@:.html=.htp) `test -f 'bfd.texi' || echo '$(srcdir)/'`bfd.texi; \
-	then \
-	  rm -rf $@ && mv $(@:.html=.htp) $@; \
-	else \
-	  rm -rf $(@:.html=.htp); exit 1; \
-	fi
-.dvi.ps:
-	$(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
-	$(DVIPS) $(AM_V_texinfo) -o $@ $<
-
-uninstall-dvi-am:
-	@$(NORMAL_UNINSTALL)
-	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
-	for p in $$list; do \
-	  $(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(dvidir)/$$f"; \
-	done
-
-uninstall-html-am:
-	@$(NORMAL_UNINSTALL)
-	@list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
-	for p in $$list; do \
-	  $(am__strip_dir) \
-	  echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
-	  rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
-	done
-
-uninstall-info-am:
-	@$(PRE_UNINSTALL)
-	@if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
-	  list='$(INFO_DEPS)'; \
-	  for file in $$list; do \
-	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
-	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
-	    if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
-	    then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
-	  done; \
-	else :; fi
-	@$(NORMAL_UNINSTALL)
-	@list='$(INFO_DEPS)'; \
-	for file in $$list; do \
-	  relfile=`echo "$$file" | sed 's|^.*/||'`; \
-	  relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
-	  (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
-	     echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
-	     rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
-	   else :; fi); \
-	done
-
-uninstall-pdf-am:
-	@$(NORMAL_UNINSTALL)
-	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
-	for p in $$list; do \
-	  $(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
-	done
-
-uninstall-ps-am:
-	@$(NORMAL_UNINSTALL)
-	@list='$(PSS)'; test -n "$(psdir)" || list=; \
-	for p in $$list; do \
-	  $(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(psdir)/$$f"; \
-	done
-
-dist-info: $(INFO_DEPS)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	list='$(INFO_DEPS)'; \
-	for base in $$list; do \
-	  case $$base in \
-	    $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
-	  esac; \
-	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
-	  base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
-	  for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
-	    if test -f $$file; then \
-	      relfile=`expr "$$file" : "$$d/\(.*\)"`; \
-	      test -f "$(distdir)/$$relfile" || \
-		cp -p $$file "$(distdir)/$$relfile"; \
-	    else :; fi; \
-	  done; \
-	done
-
-mostlyclean-aminfo:
-	-rm -rf bfd.t2d bfd.t2p
-
-clean-aminfo:
-	-test -z "bfd.dvi bfd.pdf bfd.ps bfd.html" \
-	|| rm -rf bfd.dvi bfd.pdf bfd.ps bfd.html
-
-maintainer-clean-aminfo:
-	@list='$(INFO_DEPS)'; for i in $$list; do \
-	  i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
-	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
-	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
-	done
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-	$(MAKE) $(AM_MAKEFLAGS) \
-	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
-	  dist-info
-check-am: all-am
-check: check-am
-all-am: Makefile $(INFO_DEPS)
-installdirs:
-	for dir in "$(DESTDIR)$(infodir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean: clean-am
-
-clean-am: clean-aminfo clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am: $(DVIS)
-
-html: html-am
-
-html-am: $(HTMLS) html-local
-
-info: info-am
-
-info-am: $(INFO_DEPS)
-
-install-data-am: install-info-am
-
-install-dvi: install-dvi-am
-
-install-dvi-am: $(DVIS)
-	@$(NORMAL_INSTALL)
-	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
-	done
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am: $(HTMLS)
-	@$(NORMAL_INSTALL)
-	@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  $(am__strip_dir) \
-	  d2=$$d$$p; \
-	  if test -d "$$d2"; then \
-	    echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
-	    echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
-	  else \
-	    list2="$$list2 $$d2"; \
-	  fi; \
-	done; \
-	test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
-	done; }
-install-info: install-info-am
-
-install-info-am: $(INFO_DEPS)
-	@$(NORMAL_INSTALL)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
-	fi; \
-	for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	  esac; \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
-	  for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
-	               $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
-	    if test -f $$ifile; then \
-	      echo "$$ifile"; \
-	    else : ; fi; \
-	  done; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
-	@$(POST_INSTALL)
-	@if $(am__can_run_installinfo); then \
-	  list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
-	  for file in $$list; do \
-	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
-	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
-	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
-	  done; \
-	else : ; fi
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am: $(PDFS)
-	@$(NORMAL_INSTALL)
-	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
-install-ps: install-ps-am
-
-install-ps-am: $(PSS)
-	@$(NORMAL_INSTALL)
-	@list='$(PSS)'; test -n "$(psdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-aminfo \
-	maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
-	mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am: $(PDFS)
-
-ps: ps-am
-
-ps-am: $(PSS)
-
-uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
-	uninstall-pdf-am uninstall-ps-am
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-aminfo clean-generic \
-	clean-libtool cscopelist-am ctags-am dist-info distclean \
-	distclean-generic distclean-libtool distdir dvi dvi-am html \
-	html-am html-local info info-am install install-am \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-man install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installdirs maintainer-clean \
-	maintainer-clean-aminfo maintainer-clean-generic mostlyclean \
-	mostlyclean-aminfo mostlyclean-generic mostlyclean-libtool pdf \
-	pdf-am ps ps-am tags-am uninstall uninstall-am \
-	uninstall-dvi-am uninstall-html-am uninstall-info-am \
-	uninstall-pdf-am uninstall-ps-am
-
-.PRECIOUS: Makefile
-
-
-$(MKDOC): chew.stamp ; @true
-chew.stamp: $(srcdir)/chew.c
-	$(CC_FOR_BUILD) -o chw$$$$$(EXEEXT_FOR_BUILD) $(CFLAGS_FOR_BUILD) \
-	  $(LDFLAGS_FOR_BUILD) $(H_CFLAGS) $(AM_CPPFLAGS) $(srcdir)/chew.c; \
-	$(SHELL) $(srcdir)/../../move-if-change \
-	  chw$$$$$(EXEEXT_FOR_BUILD) $(MKDOC); \
-	touch $@
-
-.PRECIOUS: %.stamp
-%.texi: %.stamp ; @true
-%.stamp: $(srcdir)/../%.h $(srcdir)/doc.str $(MKDOC)
-	$(AM_V_GEN)$(REGEN_TEXI)
-%.stamp: $(srcdir)/../%.c $(srcdir)/doc.str $(MKDOC)
-	$(AM_V_GEN)$(REGEN_TEXI)
-
-# Avoid the %.stamp generating a builddir/bfd.texi that overrides the srcdir/.
-bfd.texi bfd.stamp: ; $(AM_V_at)touch $@
-
-# We use bfdt.texi, rather than bfd.texi, to avoid conflicting with
-# bfd.texi on an 8.3 filesystem.
-bfdt.stamp: $(srcdir)/../bfd.c $(srcdir)/doc.str $(MKDOC)
-	$(AM_V_GEN)$(REGEN_TEXI)
-
-bfdver.texi: $(srcdir)/Makefile.in
-	@echo "creating $@"; \
-	echo "@set VERSION $(VERSION)" > bfdver.texi; \
-	if test -n "$(PKGVERSION)"; then \
-	  echo "@set VERSION_PACKAGE $(PKGVERSION)" >> bfdver.texi; \
-	fi; \
-	echo "@set UPDATED `date '+%B %Y'`" >> bfdver.texi; \
-	if test -n "$(REPORT_BUGS_TEXI)"; then \
-	  echo "@set BUGURL $(REPORT_BUGS_TEXI)" >> bfdver.texi; \
-	fi
-
-# We want install to imply install-info as per GNU standards, despite the
-# cygnus option.
-install: install-info
-
-html-local: bfd/index.html
-bfd/index.html: bfd.texi $(bfd_TEXINFOS)
-	$(AM_V_at)$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) \
-	  --split=node -I$(srcdir) $(srcdir)/bfd.texi
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/bfd/doc/local.mk b/bfd/doc/local.mk
new file mode 100644
index 00000000000..0f4ada596ad
--- /dev/null
+++ b/bfd/doc/local.mk
@@ -0,0 +1,156 @@
+## Process this file with automake to generate Makefile.in
+##
+##   Copyright (C) 2012-2022 Free Software Foundation, Inc.
+##
+## This file is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 3 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; see the file COPYING3.  If not see
+## <http://www.gnu.org/licenses/>.
+##
+
+DOCFILES = \
+	%D%/aoutx.texi \
+	%D%/archive.texi \
+	%D%/archures.texi \
+	%D%/bfdio.texi \
+	%D%/bfdt.texi \
+	%D%/bfdver.texi \
+	%D%/bfdwin.texi \
+	%D%/cache.texi \
+	%D%/coffcode.texi \
+	%D%/corefile.texi \
+	%D%/elfcode.texi \
+	%D%/elf.texi \
+	%D%/format.texi \
+	%D%/hash.texi \
+	%D%/init.texi \
+	%D%/libbfd.texi \
+	%D%/linker.texi \
+	%D%/mmo.texi \
+	%D%/opncls.texi \
+	%D%/reloc.texi \
+	%D%/section.texi \
+	%D%/syms.texi \
+	%D%/targets.texi
+
+# SRCDOC, SRCPROT, SRCIPROT only used to sidestep Sun Make bug in interaction
+# between VPATH and suffix rules.  If you use GNU Make, perhaps other Makes,
+# you don't need these three:
+SRCDOC = \
+	$(srcdir)/aoutx.h $(srcdir)/archive.c \
+	$(srcdir)/archures.c $(srcdir)/bfd.c \
+	$(srcdir)/bfdio.c $(srcdir)/bfdwin.c \
+	$(srcdir)/cache.c $(srcdir)/coffcode.h \
+	$(srcdir)/corefile.c $(srcdir)/elf.c \
+	$(srcdir)/elfcode.h $(srcdir)/format.c \
+	$(srcdir)/libbfd.c $(srcdir)/opncls.c \
+	$(srcdir)/reloc.c $(srcdir)/section.c \
+	$(srcdir)/syms.c $(srcdir)/targets.c \
+	$(srcdir)/hash.c $(srcdir)/linker.c \
+	$(srcdir)/mmo.c
+
+SRCPROT = $(srcdir)/archive.c $(srcdir)/archures.c \
+	$(srcdir)/bfd.c $(srcdir)/coffcode.h $(srcdir)/corefile.c \
+	$(srcdir)/format.c $(srcdir)/libbfd.c \
+	$(srcdir)/bfdio.c $(srcdir)/bfdwin.c \
+	$(srcdir)/opncls.c $(srcdir)/reloc.c \
+	$(srcdir)/section.c $(srcdir)/syms.c \
+	$(srcdir)/targets.c $(srcdir)/init.c
+
+SRCIPROT = $(srcdir)/cache.c $(srcdir)/libbfd.c \
+	$(srcdir)/bfdio.c $(srcdir)/bfdwin.c \
+	$(srcdir)/reloc.c $(srcdir)/cpu-h8300.c \
+	$(srcdir)/cpu-i960.c $(srcdir)/archures.c \
+	$(srcdir)/init.c
+
+TEXIDIR = $(srcdir)/../texinfo/fsf
+
+info_TEXINFOS = %D%/bfd.texi
+%C%_bfd_TEXINFOS = $(DOCFILES) %D%/bfdsumm.texi
+
+AM_MAKEINFOFLAGS = --no-split
+
+MKDOC = %D%/chew$(EXEEXT_FOR_BUILD)
+
+$(MKDOC): %D%/chew.stamp ; @true
+%D%/chew.stamp: $(srcdir)/%D%/chew.c %D%/$(am__dirstamp)
+	$(AM_V_CCLD)$(CC_FOR_BUILD) -o %D%/chw$$$$$(EXEEXT_FOR_BUILD) $(CFLAGS_FOR_BUILD) \
+	  $(LDFLAGS_FOR_BUILD) $(H_CFLAGS) \
+	  -I. -I$(srcdir) -I%D% -I$(srcdir)/../include -I$(srcdir)/../intl -I../intl \
+	  $(srcdir)/%D%/chew.c && \
+	$(SHELL) $(srcdir)/../move-if-change \
+	  %D%/chw$$$$$(EXEEXT_FOR_BUILD) $(MKDOC) && \
+	touch $@
+
+# We can't replace these rules with an implicit rule, because
+# makes without VPATH support couldn't find the .h files in `..'.
+
+# We do not depend on chew directly so that we can distribute the info
+# files, and permit people to rebuild them, without requiring the makeinfo
+# program.  If somebody tries to rebuild info, but none of the .texi files
+# have changed, then nothing will be rebuilt.
+
+REGEN_TEXI = \
+	( \
+	set -e; \
+	$(MKDOC) -f $(srcdir)/%D%/doc.str < $< > $@.tmp; \
+	texi=$@; \
+	texi=$${texi%.stamp}.texi; \
+	test -e $$texi || test ! -f $(srcdir)/$$texi || $(LN_S) $(srcdir)/$$texi .; \
+	$(SHELL) $(srcdir)/../move-if-change $@.tmp $$texi; \
+	touch $@; \
+	)
+
+.PRECIOUS: %D%/%.stamp
+%D%/%.texi: %D%/%.stamp ; @true
+%D%/%.stamp: $(srcdir)/%.h $(srcdir)/%D%/doc.str $(MKDOC) %D%/$(am__dirstamp)
+	$(AM_V_GEN)$(REGEN_TEXI)
+%D%/%.stamp: $(srcdir)/%.c $(srcdir)/%D%/doc.str $(MKDOC) %D%/$(am__dirstamp)
+	$(AM_V_GEN)$(REGEN_TEXI)
+
+# Avoid the %.stamp generating a builddir/bfd.texi that overrides the srcdir/.
+%D%/bfd.texi %D%/bfd.stamp: %D%/$(am__dirstamp) ; $(AM_V_at)touch $@
+
+# We use bfdt.texi, rather than bfd.texi, to avoid conflicting with
+# bfd.texi on an 8.3 filesystem.
+%D%/bfdt.stamp: $(srcdir)/bfd.c $(srcdir)/%D%/doc.str $(MKDOC) %D%/$(am__dirstamp)
+	$(AM_V_GEN)$(REGEN_TEXI)
+
+%D%/bfdver.texi: $(srcdir)/Makefile.in
+	$(AM_V_GEN)\
+	echo "@set VERSION $(VERSION)" > $@; \
+	if test -n "$(PKGVERSION)"; then \
+	  echo "@set VERSION_PACKAGE $(PKGVERSION)" >> $@; \
+	fi; \
+	echo "@set UPDATED `date '+%B %Y'`" >> $@; \
+	if test -n "$(REPORT_BUGS_TEXI)"; then \
+	  echo "@set BUGURL $(REPORT_BUGS_TEXI)" >> $@; \
+	fi
+
+noinst_TEXINFOS = %D%/bfdint.texi
+
+MOSTLYCLEANFILES += $(MKDOC) %D%/*.o %D%/*.stamp
+
+DISTCLEANFILES += %D%/bfd.?? %D%/bfd.??? texput.log
+
+MAINTAINERCLEANFILES += $(DOCFILES)
+
+# We want install to imply install-info as per GNU standards, despite the
+# cygnus option.
+install: install-info
+
+html-local: %D%/bfd/index.html
+%D%/bfd/index.html: %D%/bfd.texi $(bfd_TEXINFOS) %D%/$(am__dirstamp)
+	$(AM_V_at)$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) \
+	  --split=node -I$(srcdir) -o %D%/bfd $(srcdir)/bfd.texi
+
+MAINTAINERCLEANFILES += %D%/bfd.info