Revert "Sync top level files with versions from gcc."

This reverts commit f948b2de97884bfb4e5fc11d40a6bea9e0b096ae.

1 files changed, 1 insertions, 662 deletions

diff --git a/configure b/configure
index 4cd58c9c621..86dc0407fa0 100755
--- a/configure
+++ b/configure
@@ -603,7 +603,6 @@ WINDRES_FOR_TARGET
 STRIP_FOR_TARGET
 READELF_FOR_TARGET
 RANLIB_FOR_TARGET
-OTOOL_FOR_TARGET
 OBJDUMP_FOR_TARGET
 OBJCOPY_FOR_TARGET
 NM_FOR_TARGET
@@ -612,14 +611,12 @@ LD_FOR_TARGET
 DLLTOOL_FOR_TARGET
 AS_FOR_TARGET
 AR_FOR_TARGET
-GDC_FOR_TARGET
 GOC_FOR_TARGET
 GFORTRAN_FOR_TARGET
 GCC_FOR_TARGET
 CXX_FOR_TARGET
 CC_FOR_TARGET
 READELF
-OTOOL
 OBJDUMP
 OBJCOPY
 WINDMC
@@ -646,7 +643,6 @@ RANLIB_FOR_BUILD
 NM_FOR_BUILD
 LD_FOR_BUILD
 LDFLAGS_FOR_BUILD
-GDC_FOR_BUILD
 GOC_FOR_BUILD
 GFORTRAN_FOR_BUILD
 DLLTOOL_FOR_BUILD
@@ -859,14 +855,12 @@ WINDRES
 WINDMC
 OBJCOPY
 OBJDUMP
-OTOOL
 READELF
 CC_FOR_TARGET
 CXX_FOR_TARGET
 GCC_FOR_TARGET
 GFORTRAN_FOR_TARGET
 GOC_FOR_TARGET
-GDC_FOR_TARGET
 AR_FOR_TARGET
 AS_FOR_TARGET
 DLLTOOL_FOR_TARGET
@@ -875,7 +869,6 @@ LIPO_FOR_TARGET
 NM_FOR_TARGET
 OBJCOPY_FOR_TARGET
 OBJDUMP_FOR_TARGET
-OTOOL_FOR_TARGET
 RANLIB_FOR_TARGET
 READELF_FOR_TARGET
 STRIP_FOR_TARGET
@@ -1639,7 +1632,6 @@ Some influential environment variables:
   WINDMC      WINDMC for the host
   OBJCOPY     OBJCOPY for the host
   OBJDUMP     OBJDUMP for the host
-  OTOOL       OTOOL for the host
   READELF     READELF for the host
   CC_FOR_TARGET
               CC for the target
@@ -1651,8 +1643,6 @@ Some influential environment variables:
               GFORTRAN for the target
   GOC_FOR_TARGET
               GOC for the target
-  GDC_FOR_TARGET
-              GDC for the target
   AR_FOR_TARGET
               AR for the target
   AS_FOR_TARGET
@@ -1669,8 +1659,6 @@ Some influential environment variables:
               OBJCOPY for the target
   OBJDUMP_FOR_TARGET
               OBJDUMP for the target
-  OTOOL_FOR_TARGET
-              OTOOL for the target
   RANLIB_FOR_TARGET
               RANLIB for the target
   READELF_FOR_TARGET
@@ -2812,9 +2800,7 @@ target_libraries="target-libgcc \
 		target-libffi \
 		target-libobjc \
 		target-libada \
-		target-libgo \
-		target-libphobos \
-		target-zlib"
+		target-libgo"
 
 # these tools are built using the target libraries, and are intended to
 # run only in the target environment
@@ -3395,40 +3381,6 @@ if test "${ENABLE_LIBSTDCXX}" = "default" ; then
   esac
 fi
 
-# Disable D on systems where it is known to not work.
-# For testing, you can override this with --enable-languages=d.
-case ,${enable_languages}, in
-  *,d,*)
-    ;;
-  *)
-    case "${target}" in
-      *-*-darwin*)
-	unsupported_languages="$unsupported_languages d"
-	;;
-    esac
-    ;;
-esac
-
-# Disable libphobos on unsupported systems.
-# For testing, you can override this with --enable-libphobos.
-if test -d ${srcdir}/libphobos; then
-    if test x$enable_libphobos = x; then
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libphobos support" >&5
-$as_echo_n "checking for libphobos support... " >&6; }
-	if (srcdir=${srcdir}/libphobos; \
-		. ${srcdir}/configure.tgt; \
-		test "$LIBPHOBOS_SUPPORTED" != "yes")
-	then
-	    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-	    noconfigdirs="$noconfigdirs target-libphobos"
-	else
-	    { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-	fi
-    fi
-fi
-
 # Disable Fortran for some systems.
 case "${target}" in
   mmix-*-*)
@@ -3675,8 +3627,6 @@ case "${target}" in
     noconfigdirs="$noconfigdirs ld gas gdb gprof"
     noconfigdirs="$noconfigdirs sim target-rda"
     ;;
-  amdgcn*-*-*)
-    ;;
   arm-*-darwin*)
     noconfigdirs="$noconfigdirs ld gas gdb gprof"
     noconfigdirs="$noconfigdirs sim target-rda"
@@ -4028,7 +3978,6 @@ if test "${build}" != "${host}" ; then
   CXX_FOR_BUILD=${CXX_FOR_BUILD-g++}
   GFORTRAN_FOR_BUILD=${GFORTRAN_FOR_BUILD-gfortran}
   GOC_FOR_BUILD=${GOC_FOR_BUILD-gccgo}
-  GDC_FOR_BUILD=${GDC_FOR_BUILD-gdc}
   DLLTOOL_FOR_BUILD=${DLLTOOL_FOR_BUILD-dlltool}
   LD_FOR_BUILD=${LD_FOR_BUILD-ld}
   NM_FOR_BUILD=${NM_FOR_BUILD-nm}
@@ -4042,7 +3991,6 @@ else
   CXX_FOR_BUILD="\$(CXX)"
   GFORTRAN_FOR_BUILD="\$(GFORTRAN)"
   GOC_FOR_BUILD="\$(GOC)"
-  GDC_FOR_BUILD="\$(GDC)"
   DLLTOOL_FOR_BUILD="\$(DLLTOOL)"
   LD_FOR_BUILD="\$(LD)"
   NM_FOR_BUILD="\$(NM)"
@@ -7784,7 +7732,6 @@ done
 
 
 
-
 # Generate default definitions for YACC, M4, LEX and other programs that run
 # on the build machine.  These are used if the Makefile can't locate these
 # programs in objdir.
@@ -9876,147 +9823,6 @@ fi
 
 
 
-if test -n "$OTOOL"; then
-  ac_cv_prog_OTOOL=$OTOOL
-elif test -n "$ac_cv_prog_OTOOL"; then
-  OTOOL=$ac_cv_prog_OTOOL
-fi
-
-if test -n "$ac_cv_prog_OTOOL"; then
-  for ncn_progname in otool; do
-    # Extract the first word of "${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_progname}; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_OTOOL+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$OTOOL"; then
-  ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_OTOOL="${ncn_progname}"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-OTOOL=$ac_cv_prog_OTOOL
-if test -n "$OTOOL"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
-$as_echo "$OTOOL" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  done
-fi
-
-for ncn_progname in otool; do
-  if test -n "$ncn_tool_prefix"; then
-    # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_OTOOL+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$OTOOL"; then
-  ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_OTOOL="${ncn_tool_prefix}${ncn_progname}"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-OTOOL=$ac_cv_prog_OTOOL
-if test -n "$OTOOL"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
-$as_echo "$OTOOL" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  fi
-  if test -z "$ac_cv_prog_OTOOL" && test $build = $host ; then
-    # Extract the first word of "${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_progname}; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_OTOOL+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$OTOOL"; then
-  ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_OTOOL="${ncn_progname}"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-OTOOL=$ac_cv_prog_OTOOL
-if test -n "$OTOOL"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
-$as_echo "$OTOOL" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  fi
-  test -n "$ac_cv_prog_OTOOL" && break
-done
-
-if test -z "$ac_cv_prog_OTOOL" ; then
-  set dummy otool
-  if test $build = $host ; then
-    OTOOL="$2"
-  else
-    OTOOL="${ncn_tool_prefix}$2"
-  fi
-fi
-
-
-
 if test -n "$READELF"; then
   ac_cv_prog_READELF=$READELF
 elif test -n "$ac_cv_prog_READELF"; then
@@ -10980,167 +10786,6 @@ fi
 
 
 
-if test -n "$GDC_FOR_TARGET"; then
-  ac_cv_prog_GDC_FOR_TARGET=$GDC_FOR_TARGET
-elif test -n "$ac_cv_prog_GDC_FOR_TARGET"; then
-  GDC_FOR_TARGET=$ac_cv_prog_GDC_FOR_TARGET
-fi
-
-if test -n "$ac_cv_prog_GDC_FOR_TARGET"; then
-  for ncn_progname in gdc; do
-    # Extract the first word of "${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_progname}; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_GDC_FOR_TARGET+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$GDC_FOR_TARGET"; then
-  ac_cv_prog_GDC_FOR_TARGET="$GDC_FOR_TARGET" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_GDC_FOR_TARGET="${ncn_progname}"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-GDC_FOR_TARGET=$ac_cv_prog_GDC_FOR_TARGET
-if test -n "$GDC_FOR_TARGET"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GDC_FOR_TARGET" >&5
-$as_echo "$GDC_FOR_TARGET" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  done
-fi
-
-if test -z "$ac_cv_prog_GDC_FOR_TARGET" && test -n "$with_build_time_tools"; then
-  for ncn_progname in gdc; do
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ncn_progname} in $with_build_time_tools" >&5
-$as_echo_n "checking for ${ncn_progname} in $with_build_time_tools... " >&6; }
-    if test -x $with_build_time_tools/${ncn_progname}; then
-      ac_cv_prog_GDC_FOR_TARGET=$with_build_time_tools/${ncn_progname}
-      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-      break
-    else
-      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-    fi
-  done
-fi
-
-if test -z "$ac_cv_prog_GDC_FOR_TARGET"; then
-  for ncn_progname in gdc; do
-    if test -n "$ncn_target_tool_prefix"; then
-      # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_GDC_FOR_TARGET+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$GDC_FOR_TARGET"; then
-  ac_cv_prog_GDC_FOR_TARGET="$GDC_FOR_TARGET" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_GDC_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-GDC_FOR_TARGET=$ac_cv_prog_GDC_FOR_TARGET
-if test -n "$GDC_FOR_TARGET"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GDC_FOR_TARGET" >&5
-$as_echo "$GDC_FOR_TARGET" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-    fi
-    if test -z "$ac_cv_prog_GDC_FOR_TARGET" && test $build = $target ; then
-      # Extract the first word of "${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_progname}; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_GDC_FOR_TARGET+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$GDC_FOR_TARGET"; then
-  ac_cv_prog_GDC_FOR_TARGET="$GDC_FOR_TARGET" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_GDC_FOR_TARGET="${ncn_progname}"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-GDC_FOR_TARGET=$ac_cv_prog_GDC_FOR_TARGET
-if test -n "$GDC_FOR_TARGET"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GDC_FOR_TARGET" >&5
-$as_echo "$GDC_FOR_TARGET" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-    fi
-    test -n "$ac_cv_prog_GDC_FOR_TARGET" && break
-  done
-fi
-
-if test -z "$ac_cv_prog_GDC_FOR_TARGET" ; then
-  set dummy gdc
-  if test $build = $target ; then
-    GDC_FOR_TARGET="$2"
-  else
-    GDC_FOR_TARGET="${ncn_target_tool_prefix}$2"
-  fi
-else
-  GDC_FOR_TARGET="$ac_cv_prog_GDC_FOR_TARGET"
-fi
-
-
-
 cat > conftest.c << \EOF
 #ifdef __GNUC__
   gcc_yay;
@@ -12997,236 +12642,6 @@ fi
 
 
 
-if test -z "$ac_cv_path_OTOOL_FOR_TARGET" ; then
-  if test -n "$with_build_time_tools"; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for otool in $with_build_time_tools" >&5
-$as_echo_n "checking for otool in $with_build_time_tools... " >&6; }
-    if test -x $with_build_time_tools/otool; then
-      OTOOL_FOR_TARGET=`cd $with_build_time_tools && pwd`/otool
-      ac_cv_path_OTOOL_FOR_TARGET=$OTOOL_FOR_TARGET
-      { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_OTOOL_FOR_TARGET" >&5
-$as_echo "$ac_cv_path_OTOOL_FOR_TARGET" >&6; }
-    else
-      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-    fi
-  elif test $build != $host && test $have_gcc_for_target = yes; then
-    OTOOL_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=otool`
-    test $OTOOL_FOR_TARGET = otool && OTOOL_FOR_TARGET=
-    test -n "$OTOOL_FOR_TARGET" && ac_cv_path_OTOOL_FOR_TARGET=$OTOOL_FOR_TARGET
-  fi
-fi
-if test -z "$ac_cv_path_OTOOL_FOR_TARGET" && test -n "$gcc_cv_tool_dirs"; then
-  # Extract the first word of "otool", so it can be a program name with args.
-set dummy otool; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_OTOOL_FOR_TARGET+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $OTOOL_FOR_TARGET in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_OTOOL_FOR_TARGET="$OTOOL_FOR_TARGET" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $gcc_cv_tool_dirs
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_OTOOL_FOR_TARGET="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  ;;
-esac
-fi
-OTOOL_FOR_TARGET=$ac_cv_path_OTOOL_FOR_TARGET
-if test -n "$OTOOL_FOR_TARGET"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL_FOR_TARGET" >&5
-$as_echo "$OTOOL_FOR_TARGET" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_path_OTOOL_FOR_TARGET" ; then
-
-
-if test -n "$OTOOL_FOR_TARGET"; then
-  ac_cv_prog_OTOOL_FOR_TARGET=$OTOOL_FOR_TARGET
-elif test -n "$ac_cv_prog_OTOOL_FOR_TARGET"; then
-  OTOOL_FOR_TARGET=$ac_cv_prog_OTOOL_FOR_TARGET
-fi
-
-if test -n "$ac_cv_prog_OTOOL_FOR_TARGET"; then
-  for ncn_progname in otool; do
-    # Extract the first word of "${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_progname}; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_OTOOL_FOR_TARGET+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$OTOOL_FOR_TARGET"; then
-  ac_cv_prog_OTOOL_FOR_TARGET="$OTOOL_FOR_TARGET" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_OTOOL_FOR_TARGET="${ncn_progname}"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-OTOOL_FOR_TARGET=$ac_cv_prog_OTOOL_FOR_TARGET
-if test -n "$OTOOL_FOR_TARGET"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL_FOR_TARGET" >&5
-$as_echo "$OTOOL_FOR_TARGET" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  done
-fi
-
-if test -z "$ac_cv_prog_OTOOL_FOR_TARGET" && test -n "$with_build_time_tools"; then
-  for ncn_progname in otool; do
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ncn_progname} in $with_build_time_tools" >&5
-$as_echo_n "checking for ${ncn_progname} in $with_build_time_tools... " >&6; }
-    if test -x $with_build_time_tools/${ncn_progname}; then
-      ac_cv_prog_OTOOL_FOR_TARGET=$with_build_time_tools/${ncn_progname}
-      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-      break
-    else
-      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-    fi
-  done
-fi
-
-if test -z "$ac_cv_prog_OTOOL_FOR_TARGET"; then
-  for ncn_progname in otool; do
-    if test -n "$ncn_target_tool_prefix"; then
-      # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_OTOOL_FOR_TARGET+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$OTOOL_FOR_TARGET"; then
-  ac_cv_prog_OTOOL_FOR_TARGET="$OTOOL_FOR_TARGET" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_OTOOL_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-OTOOL_FOR_TARGET=$ac_cv_prog_OTOOL_FOR_TARGET
-if test -n "$OTOOL_FOR_TARGET"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL_FOR_TARGET" >&5
-$as_echo "$OTOOL_FOR_TARGET" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-    fi
-    if test -z "$ac_cv_prog_OTOOL_FOR_TARGET" && test $build = $target ; then
-      # Extract the first word of "${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_progname}; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_OTOOL_FOR_TARGET+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$OTOOL_FOR_TARGET"; then
-  ac_cv_prog_OTOOL_FOR_TARGET="$OTOOL_FOR_TARGET" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_OTOOL_FOR_TARGET="${ncn_progname}"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-OTOOL_FOR_TARGET=$ac_cv_prog_OTOOL_FOR_TARGET
-if test -n "$OTOOL_FOR_TARGET"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL_FOR_TARGET" >&5
-$as_echo "$OTOOL_FOR_TARGET" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-    fi
-    test -n "$ac_cv_prog_OTOOL_FOR_TARGET" && break
-  done
-fi
-
-if test -z "$ac_cv_prog_OTOOL_FOR_TARGET" ; then
-  set dummy otool
-  if test $build = $target ; then
-    OTOOL_FOR_TARGET="$2"
-  else
-    OTOOL_FOR_TARGET="${ncn_target_tool_prefix}$2"
-  fi
-else
-  OTOOL_FOR_TARGET="$ac_cv_prog_OTOOL_FOR_TARGET"
-fi
-
-else
-  OTOOL_FOR_TARGET=$ac_cv_path_OTOOL_FOR_TARGET
-fi
-
-
-
-
 if test -z "$ac_cv_path_RANLIB_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ranlib in $with_build_time_tools" >&5
@@ -14767,51 +14182,6 @@ $as_echo "pre-installed" >&6; }
   fi
 fi
 
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking where to find the target gdc" >&5
-$as_echo_n "checking where to find the target gdc... " >&6; }
-if test "x${build}" != "x${host}" ; then
-  if expr "x$GDC_FOR_TARGET" : "x/" > /dev/null; then
-    # We already found the complete path
-    ac_dir=`dirname $GDC_FOR_TARGET`
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed in $ac_dir" >&5
-$as_echo "pre-installed in $ac_dir" >&6; }
-  else
-    # Canadian cross, just use what we found
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed" >&5
-$as_echo "pre-installed" >&6; }
-  fi
-else
-  ok=yes
-  case " ${configdirs} " in
-    *" gcc "*) ;;
-    *) ok=no ;;
-  esac
-  case ,${enable_languages}, in
-    *,d,*) ;;
-    *) ok=no ;;
-  esac
-  if test $ok = yes; then
-    # An in-tree tool is available and we can use it
-    GDC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gdc -B$$r/$(HOST_SUBDIR)/gcc/'
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: just compiled" >&5
-$as_echo "just compiled" >&6; }
-  elif expr "x$GDC_FOR_TARGET" : "x/" > /dev/null; then
-    # We already found the complete path
-    ac_dir=`dirname $GDC_FOR_TARGET`
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed in $ac_dir" >&5
-$as_echo "pre-installed in $ac_dir" >&6; }
-  elif test "x$target" = "x$host"; then
-    # We can use an host tool
-    GDC_FOR_TARGET='$(GDC)'
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: host tool" >&5
-$as_echo "host tool" >&6; }
-  else
-    # We need a cross tool
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed" >&5
-$as_echo "pre-installed" >&6; }
-  fi
-fi
-
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking where to find the target ld" >&5
 $as_echo_n "checking where to find the target ld... " >&6; }
 if test "x${build}" != "x${host}" ; then
@@ -15011,37 +14381,6 @@ $as_echo "pre-installed" >&6; }
   fi
 fi
 
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking where to find the target otool" >&5
-$as_echo_n "checking where to find the target otool... " >&6; }
-if test "x${build}" != "x${host}" ; then
-  if expr "x$OTOOL_FOR_TARGET" : "x/" > /dev/null; then
-    # We already found the complete path
-    ac_dir=`dirname $OTOOL_FOR_TARGET`
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed in $ac_dir" >&5
-$as_echo "pre-installed in $ac_dir" >&6; }
-  else
-    # Canadian cross, just use what we found
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed" >&5
-$as_echo "pre-installed" >&6; }
-  fi
-else
-  if expr "x$OTOOL_FOR_TARGET" : "x/" > /dev/null; then
-    # We already found the complete path
-    ac_dir=`dirname $OTOOL_FOR_TARGET`
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed in $ac_dir" >&5
-$as_echo "pre-installed in $ac_dir" >&6; }
-  elif test "x$target" = "x$host"; then
-    # We can use an host tool
-    OTOOL_FOR_TARGET='$(OTOOL)'
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: host tool" >&5
-$as_echo "host tool" >&6; }
-  else
-    # We need a cross tool
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed" >&5
-$as_echo "pre-installed" >&6; }
-  fi
-fi
-
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking where to find the target ranlib" >&5
 $as_echo_n "checking where to find the target ranlib... " >&6; }
 if test "x${build}" != "x${host}" ; then