Change gdbserver to use existing gnulib and libiberty

This changes gdbserver so that it no longer builds its own gnulib and
libiberty.  Instead, it now relies on the ones that were already built
at the top level.

gdbsupport is still built specially for gdbserver.  This is more
complicated and will be tackled in a subsequent patch.

ChangeLog
2020-02-14  Tom Tromey  <tom@tromey.com>

	* Makefile.in: Rebuild.
	* Makefile.def: Make gdbserver require gnulib and libiberty.

gdbserver/ChangeLog
2020-02-14  Tom Tromey  <tom@tromey.com>

	* acinclude.m4: Don't include acx_configure_dir.m4.
	* Makefile.in (LIBIBERTY_BUILDDIR, GNULIB_BUILDDIR): Update.
	(SUBDIRS, CLEANDIRS, REQUIRED_SUBDIRS): Remove.
	(all, install-only, uninstall, clean-info, clean)
	(maintainer-clean): Don't recurse.
	(subdir_do, all-lib): Remove.
	($(LIBGNU) $(LIBIBERTY) $(GNULIB_H)): Remove rule.
	(GNULIB_H): Remove.
	(generated_files): Update.
	($(GNULIB_BUILDDIR)/Makefile): Remove rule.
	* configure: Rebuild.
	* configure.ac: Don't configure gnulib or libiberty.
	(GNULIB): Update.

gdbsupport/ChangeLog
2020-02-14  Tom Tromey  <tom@tromey.com>

	* common-defs.h: Change path to gnulib/config.h.

Change-Id: I469cbbf5db2ab37109c058e9e3a1e4f4dabdfc98

1 files changed, 1 insertions, 218 deletions

diff --git a/gdbserver/configure b/gdbserver/configure
index 7d42803f640..0ae464644c9 100755
--- a/gdbserver/configure
+++ b/gdbserver/configure
@@ -6243,223 +6243,6 @@ else CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
 fi
 
 
-gnulib_extra_configure_args=
-# If large-file support is disabled, make sure gnulib does the same.
-if test "$enable_largefile" = no; then
-gnulib_extra_configure_args="$gnulib_extra_configure_args --disable-largefile"
-fi
-
-# Configure gnulib.  We can't use AC_CONFIG_SUBDIRS as that'd expect
-# to find the the source subdir to be configured directly under
-# gdbserver/.  We need to build gnulib under some other directory not
-# "gnulib", to avoid the problem of both GDB and GDBserver wanting to
-# build it in the same directory, when building in the source dir.
-
-  in_src="../gnulib"
-  in_build="build-gnulib-gdbserver"
-  in_extra_args="$gnulib_extra_configure_args"
-
-  # Remove --cache-file, --srcdir, and --disable-option-checking arguments
-  # so they do not pile up.
-  ac_sub_configure_args=
-  ac_prev=
-  eval "set x $ac_configure_args"
-  shift
-  for ac_arg
-  do
-    if test -n "$ac_prev"; then
-      ac_prev=
-      continue
-    fi
-    case $ac_arg in
-    -cache-file | --cache-file | --cache-fil | --cache-fi \
-    | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-      ac_prev=cache_file ;;
-    -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-    | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* \
-    | --c=*)
-      ;;
-    --config-cache | -C)
-      ;;
-    -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-      ac_prev=srcdir ;;
-    -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-      ;;
-    -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-      ac_prev=prefix ;;
-    -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-      ;;
-    --disable-option-checking)
-      ;;
-    *)
-      case $ac_arg in
-      *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-      esac
-      as_fn_append ac_sub_configure_args " '$ac_arg'" ;;
-    esac
-  done
-
-  # Always prepend --prefix to ensure using the same prefix
-  # in subdir configurations.
-  ac_arg="--prefix=$prefix"
-  case $ac_arg in
-  *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-  esac
-  ac_sub_configure_args="'$ac_arg' $ac_sub_configure_args"
-
-  # Pass --silent
-  if test "$silent" = yes; then
-    ac_sub_configure_args="--silent $ac_sub_configure_args"
-  fi
-
-  # Always prepend --disable-option-checking to silence warnings, since
-  # different subdirs can have different --enable and --with options.
-  ac_sub_configure_args="--disable-option-checking $ac_sub_configure_args"
-
-  ac_popdir=`pwd`
-  ac_dir=$in_build
-
-  ac_msg="=== configuring in $ac_dir (`pwd`/$ac_dir)"
-  $as_echo "$as_me:${as_lineno-$LINENO}: $ac_msg" >&5
-  $as_echo "$ac_msg" >&6
-  as_dir="$ac_dir"; as_fn_mkdir_p
-
-  case $srcdir in
-  [\\/]* | ?:[\\/]* )
-    ac_srcdir=$srcdir/$in_src ;;
-  *) # Relative name.
-    ac_srcdir=../$srcdir/$in_src ;;
-  esac
-
-  cd "$ac_dir"
-
-  ac_sub_configure=$ac_srcdir/configure
-
-  # Make the cache file name correct relative to the subdirectory.
-  case $cache_file in
-  [\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;;
-  *) # Relative name.
-    ac_sub_cache_file=$ac_top_build_prefix$cache_file ;;
-  esac
-
-  if test -n "$in_extra_args"; then
-    # Add the extra args at the end.
-    ac_sub_configure_args="$ac_sub_configure_args $in_extra_args"
-  fi
-
-  { $as_echo "$as_me:${as_lineno-$LINENO}: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5
-$as_echo "$as_me: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;}
-  # The eval makes quoting arguments work.
-  eval "\$SHELL \"\$ac_sub_configure\" $ac_sub_configure_args \
-       --cache-file=\"\$ac_sub_cache_file\" --srcdir=\"\$ac_srcdir\"" ||
-    as_fn_error $? "$ac_sub_configure failed for $ac_dir" "$LINENO" 5
-
-  cd "$ac_popdir"
-
-
-
-  in_src="../libiberty"
-  in_build="build-libiberty-gdbserver"
-  in_extra_args=
-
-  # Remove --cache-file, --srcdir, and --disable-option-checking arguments
-  # so they do not pile up.
-  ac_sub_configure_args=
-  ac_prev=
-  eval "set x $ac_configure_args"
-  shift
-  for ac_arg
-  do
-    if test -n "$ac_prev"; then
-      ac_prev=
-      continue
-    fi
-    case $ac_arg in
-    -cache-file | --cache-file | --cache-fil | --cache-fi \
-    | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-      ac_prev=cache_file ;;
-    -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-    | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* \
-    | --c=*)
-      ;;
-    --config-cache | -C)
-      ;;
-    -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-      ac_prev=srcdir ;;
-    -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-      ;;
-    -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-      ac_prev=prefix ;;
-    -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-      ;;
-    --disable-option-checking)
-      ;;
-    *)
-      case $ac_arg in
-      *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-      esac
-      as_fn_append ac_sub_configure_args " '$ac_arg'" ;;
-    esac
-  done
-
-  # Always prepend --prefix to ensure using the same prefix
-  # in subdir configurations.
-  ac_arg="--prefix=$prefix"
-  case $ac_arg in
-  *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-  esac
-  ac_sub_configure_args="'$ac_arg' $ac_sub_configure_args"
-
-  # Pass --silent
-  if test "$silent" = yes; then
-    ac_sub_configure_args="--silent $ac_sub_configure_args"
-  fi
-
-  # Always prepend --disable-option-checking to silence warnings, since
-  # different subdirs can have different --enable and --with options.
-  ac_sub_configure_args="--disable-option-checking $ac_sub_configure_args"
-
-  ac_popdir=`pwd`
-  ac_dir=$in_build
-
-  ac_msg="=== configuring in $ac_dir (`pwd`/$ac_dir)"
-  $as_echo "$as_me:${as_lineno-$LINENO}: $ac_msg" >&5
-  $as_echo "$ac_msg" >&6
-  as_dir="$ac_dir"; as_fn_mkdir_p
-
-  case $srcdir in
-  [\\/]* | ?:[\\/]* )
-    ac_srcdir=$srcdir/$in_src ;;
-  *) # Relative name.
-    ac_srcdir=../$srcdir/$in_src ;;
-  esac
-
-  cd "$ac_dir"
-
-  ac_sub_configure=$ac_srcdir/configure
-
-  # Make the cache file name correct relative to the subdirectory.
-  case $cache_file in
-  [\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;;
-  *) # Relative name.
-    ac_sub_cache_file=$ac_top_build_prefix$cache_file ;;
-  esac
-
-  if test -n "$in_extra_args"; then
-    # Add the extra args at the end.
-    ac_sub_configure_args="$ac_sub_configure_args $in_extra_args"
-  fi
-
-  { $as_echo "$as_me:${as_lineno-$LINENO}: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5
-$as_echo "$as_me: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;}
-  # The eval makes quoting arguments work.
-  eval "\$SHELL \"\$ac_sub_configure\" $ac_sub_configure_args \
-       --cache-file=\"\$ac_sub_cache_file\" --srcdir=\"\$ac_srcdir\"" ||
-    as_fn_error $? "$ac_sub_configure failed for $ac_dir" "$LINENO" 5
-
-  cd "$ac_popdir"
-
-
 for ac_header in termios.h sys/reg.h string.h 		 sys/procfs.h linux/elf.h 		 fcntl.h signal.h sys/file.h 		 sys/ioctl.h netinet/in.h sys/socket.h netdb.h 		 netinet/tcp.h arpa/inet.h
 do :
   as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
@@ -10840,7 +10623,7 @@ fi
 
 
 
-GNULIB=build-gnulib-gdbserver/import
+GNULIB=../gnulib/import
 
 GNULIB_STDINT_H=
 if test x"$STDINT_H" != x; then