diff options
Diffstat (limited to 'bfd/reloc.c')
| -rw-r--r-- | bfd/reloc.c | 166 |
1 files changed, 155 insertions, 11 deletions
diff --git a/bfd/reloc.c b/bfd/reloc.c index 20df4f86fde..deba952832d 100644 --- a/bfd/reloc.c +++ b/bfd/reloc.c @@ -645,7 +645,7 @@ bfd_perform_relocation (abfd, reloc_entry, data, input_section, output_bfd, reloc_target_output_section = symbol->section->output_section; /* Convert input-section-relative symbol value to absolute. */ - if (output_bfd && howto->partial_inplace == false) + if (output_bfd && ! howto->partial_inplace) output_base = 0; else output_base = reloc_target_output_section->vma; @@ -658,7 +658,7 @@ bfd_perform_relocation (abfd, reloc_entry, data, input_section, output_bfd, /* Here the variable relocation holds the final address of the symbol we are relocating against, plus any addend. */ - if (howto->pc_relative == true) + if (howto->pc_relative) { /* This is a PC relative relocation. We want to set RELOCATION to the distance between the address of the symbol and the @@ -691,13 +691,13 @@ bfd_perform_relocation (abfd, reloc_entry, data, input_section, output_bfd, relocation -= input_section->output_section->vma + input_section->output_offset; - if (howto->pcrel_offset == true) + if (howto->pcrel_offset) relocation -= reloc_entry->address; } if (output_bfd != (bfd *) NULL) { - if (howto->partial_inplace == false) + if (! howto->partial_inplace) { /* This is a partial relocation, and we want to apply the relocation to the reloc entry rather than the raw data. Modify the reloc @@ -1037,7 +1037,7 @@ bfd_install_relocation (abfd, reloc_entry, data_start, data_start_offset, reloc_target_output_section = symbol->section->output_section; /* Convert input-section-relative symbol value to absolute. */ - if (howto->partial_inplace == false) + if (! howto->partial_inplace) output_base = 0; else output_base = reloc_target_output_section->vma; @@ -1050,7 +1050,7 @@ bfd_install_relocation (abfd, reloc_entry, data_start, data_start_offset, /* Here the variable relocation holds the final address of the symbol we are relocating against, plus any addend. */ - if (howto->pc_relative == true) + if (howto->pc_relative) { /* This is a PC relative relocation. We want to set RELOCATION to the distance between the address of the symbol and the @@ -1083,11 +1083,11 @@ bfd_install_relocation (abfd, reloc_entry, data_start, data_start_offset, relocation -= input_section->output_section->vma + input_section->output_offset; - if (howto->pcrel_offset == true && howto->partial_inplace == true) + if (howto->pcrel_offset && howto->partial_inplace) relocation -= reloc_entry->address; } - if (howto->partial_inplace == false) + if (! howto->partial_inplace) { /* This is a partial relocation, and we want to apply the relocation to the reloc entry rather than the raw data. Modify the reloc @@ -1963,6 +1963,35 @@ ENUMDOC STO_ALPHA_STD_GPLOAD. ENUM + BFD_RELOC_ALPHA_TLSGD +ENUMX + BFD_RELOC_ALPHA_TLSLDM +ENUMX + BFD_RELOC_ALPHA_DTPMOD64 +ENUMX + BFD_RELOC_ALPHA_GOTDTPREL16 +ENUMX + BFD_RELOC_ALPHA_DTPREL64 +ENUMX + BFD_RELOC_ALPHA_DTPREL_HI16 +ENUMX + BFD_RELOC_ALPHA_DTPREL_LO16 +ENUMX + BFD_RELOC_ALPHA_DTPREL16 +ENUMX + BFD_RELOC_ALPHA_GOTTPREL16 +ENUMX + BFD_RELOC_ALPHA_TPREL64 +ENUMX + BFD_RELOC_ALPHA_TPREL_HI16 +ENUMX + BFD_RELOC_ALPHA_TPREL_LO16 +ENUMX + BFD_RELOC_ALPHA_TPREL16 +ENUMDOC + Alpha thread-local storage relocations. + +ENUM BFD_RELOC_MIPS_JMP ENUMDOC Bits 27..2 of the relocation address shifted right 2 bits; @@ -2050,6 +2079,27 @@ ENUMX ENUMX BFD_RELOC_MIPS_JALR COMMENT +ENUM + BFD_RELOC_FRV_LABEL16 +ENUMX + BFD_RELOC_FRV_LABEL24 +ENUMX + BFD_RELOC_FRV_LO16 +ENUMX + BFD_RELOC_FRV_HI16 +ENUMX + BFD_RELOC_FRV_GPREL12 +ENUMX + BFD_RELOC_FRV_GPRELU12 +ENUMX + BFD_RELOC_FRV_GPREL32 +ENUMX + BFD_RELOC_FRV_GPRELHI +ENUMX + BFD_RELOC_FRV_GPRELLO +ENUMDOC + Fujitsu Frv Relocations. +COMMENT COMMENT ENUMDOC MIPS ELF relocations. @@ -3073,6 +3123,55 @@ ENUMDOC 32 bit rel. offset to GOT entry. ENUM + BFD_RELOC_IP2K_FR9 +ENUMDOC + Scenix IP2K - 9-bit register number / data address +ENUM + BFD_RELOC_IP2K_BANK +ENUMDOC + Scenix IP2K - 4-bit register/data bank number +ENUM + BFD_RELOC_IP2K_ADDR16CJP +ENUMDOC + Scenix IP2K - low 13 bits of instruction word address +ENUM + BFD_RELOC_IP2K_PAGE3 +ENUMDOC + Scenix IP2K - high 3 bits of instruction word address +ENUM + BFD_RELOC_IP2K_LO8DATA +ENUMX + BFD_RELOC_IP2K_HI8DATA +ENUMX + BFD_RELOC_IP2K_EX8DATA +ENUMDOC + Scenix IP2K - ext/low/high 8 bits of data address +ENUM + BFD_RELOC_IP2K_LO8INSN +ENUMX + BFD_RELOC_IP2K_HI8INSN +ENUMDOC + Scenix IP2K - low/high 8 bits of instruction word address +ENUM + BFD_RELOC_IP2K_PC_SKIP +ENUMDOC + Scenix IP2K - even/odd PC modifier to modify snb pcl.0 +ENUM + BFD_RELOC_IP2K_TEXT +ENUMDOC + Scenix IP2K - 16 bit word address in text section. +ENUM + BFD_RELOC_IP2K_FR_OFFSET +ENUMDOC + Scenix IP2K - 7-bit sp or dp offset +ENUM + BFD_RELOC_VPE4KMATH_DATA +ENUMX + BFD_RELOC_VPE4KMATH_INSN +ENUMDOC + Scenix VPE4K coprocessor - data/insn-space addressing + +ENUM BFD_RELOC_VTABLE_INHERIT ENUMX BFD_RELOC_VTABLE_ENTRY @@ -3260,17 +3359,53 @@ ENUM BFD_RELOC_M68HC11_HI8 ENUMDOC Motorola 68HC11 reloc. - This is the 8 bits high part of an absolute address. + This is the 8 bit high part of an absolute address. ENUM BFD_RELOC_M68HC11_LO8 ENUMDOC Motorola 68HC11 reloc. - This is the 8 bits low part of an absolute address. + This is the 8 bit low part of an absolute address. ENUM BFD_RELOC_M68HC11_3B ENUMDOC Motorola 68HC11 reloc. - This is the 3 bits of a value. + This is the 3 bit of a value. +ENUM + BFD_RELOC_M68HC11_RL_JUMP +ENUMDOC + Motorola 68HC11 reloc. + This reloc marks the beginning of a jump/call instruction. + It is used for linker relaxation to correctly identify beginning + of instruction and change some branchs to use PC-relative + addressing mode. +ENUM + BFD_RELOC_M68HC11_RL_GROUP +ENUMDOC + Motorola 68HC11 reloc. + This reloc marks a group of several instructions that gcc generates + and for which the linker relaxation pass can modify and/or remove + some of them. +ENUM + BFD_RELOC_M68HC11_LO16 +ENUMDOC + Motorola 68HC11 reloc. + This is the 16-bit lower part of an address. It is used for 'call' + instruction to specify the symbol address without any special + transformation (due to memory bank window). +ENUM + BFD_RELOC_M68HC11_PAGE +ENUMDOC + Motorola 68HC11 reloc. + This is a 8-bit reloc that specifies the page number of an address. + It is used by 'call' instruction to specify the page number of + the symbol. +ENUM + BFD_RELOC_M68HC11_24 +ENUMDOC + Motorola 68HC11 reloc. + This is a 24-bit reloc that represents the address with a 16-bit + value and a 8-bit page number. The symbol address is transformed + to follow the 16K memory bank of 68HC12 (seen as mapped in the window). ENUM BFD_RELOC_CRIS_BDISP8 @@ -3420,6 +3555,15 @@ ENUMX ENUMDOC Sony Xstormy16 Relocations. +ENUM + BFD_RELOC_VAX_GLOB_DAT +ENUMX + BFD_RELOC_VAX_JMP_SLOT +ENUMX + BFD_RELOC_VAX_RELATIVE +ENUMDOC + Relocations used by VAX ELF. + ENDSENUM BFD_RELOC_UNUSED CODE_FRAGMENT |