diff options
Diffstat (limited to 'gdb/testsuite/ChangeLog')
| -rw-r--r-- | gdb/testsuite/ChangeLog | 8605 |
1 files changed, 0 insertions, 8605 deletions
diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog deleted file mode 100644 index 93d9a7cf54e..00000000000 --- a/gdb/testsuite/ChangeLog +++ /dev/null @@ -1,8605 +0,0 @@ -2002-02-06 Jim Blandy <jimb@redhat.com> - - * gdb.base/callfwmall.c, gdb.base/callfwmall.exp: Move these tests - from here... - * gdb.hp/gdb.base-hp/callfwmall.c, gdb.hp/gdb.base-hp/callfwmall.exp: - To here. Disable this test on non-HP platforms. Add big comment. - -2002-02-04 Michael Snyder <msnyder@redhat.com> - - * gdb.base/ovlymgr.c (ovly_copy): Generalize for targets - other than d10v and m32r. - -2002-02-02 Richard Earnshaw <rearnsha@arm.com> - - * gdb.base/default.exp: Rewrite test patterns to reduce time - taken to match them. - -2002-01-30 Daniel Jacobowitz <drow@mvista.com> - - * gdb.base/annota1.exp (backtrace from shlibrary): Fix spelling. - Allow a start function above main. - * gdb.threads/linux-dp.exp: Fix copyright date. - -2002-01-30 Daniel Jacobowitz <drow@mvista.com> - - * gdb.threads/linux-dp.exp: Use 'array unset', not 'array set'. - (check_philosopher_stack): Check for manager thread before checking - for a just-starting thread. - -2002-01-30 Daniel Jacobowitz <drow@mvista.com> - - From Neil Booth <neil@daikokuya.demon.co.uk>: - * gdb.base/bitfields.c: Correct assignments to bitfields to avoid - warnings. - -2002-01-21 Fred Fish <fnf@redhat.com> - - * gdb.base/restore.exp (restore_tests): Fix obvious typo, callee - not caller. - -2002-01-21 Jim Blandy <jimb@redhat.com> - - * gdb.base/reread.exp: Check that GDB properly re-reads the - executable file when it changes while no inferior is running. - -2002-01-21 Fred Fish <fnf@redhat.com> - - * gdb.base/maint.exp: Simplify the "maint info breakpoints" test to - optionally accept the "shlib events" variation. - -2002-01-21 Jim Blandy <jimb@redhat.com> - - * gdb.base/ending-run.c (main): Avoid messing with setvbuf; just - call `fflush' after every `printf', so that the output is produced - at predictable points, regardless of whatever buffering does (or - doesn't) take place. - * gdb.base/ending-run.exp: Adjust tests to expect output to appear - at different points. - -2002-01-20 Daniel Jacobowitz <drow@mvista.com> - - * gdb.c++/inherit.exp: Update copyright years. - * gdb.c++/method.exp: Likewise. - -2002-01-20 Daniel Jacobowitz <drow@mvista.com> - - * gdb.c++/classes.exp: Update for improved v3 support and skipping - artificial methods/arguments. - * gdb.c++/derivation.exp: Likewise. - * gdb.c++/inherit.exp: Likewise. - * gdb.c++/method.exp: Likewise. - * gdb.c++/virtfunc.exp: Likewise. - -2002-01-18 Andrew Cagney <ac131313@redhat.com> - - * gdb.hp/gdb.threads-hp/usrthfork.exp: Mark as obsolete. - * gdb.hp/gdb.threads-hp/usrthcore.exp: Ditto. - * gdb.hp/gdb.threads-hp/usrthbasic.exp: Ditto. - * gdb.hp/gdb.threads-hp/usrthfork.c: Ditto. - * gdb.hp/gdb.threads-hp/usrthbasic.c: Ditto. - * gdb.hp/gdb.threads-hp/usrthcore.c: Ditto. - -2002-01-17 Jim Blandy <jimb@redhat.com> - - * gdb.asm/asm-source.exp (info symbol): Take another shot at - anchoring the pattern matching the entry point symbol's name. - -2002-01-17 Andrew Cagney <ac131313@redhat.com> - - * gdb.base/maint.exp: Update ``maint internal-error'' to match - continue/quit query. Update copyright. - -2002-01-14 Michael Snyder <msnyder@redhat.com> - - * gdb.base/gcore.exp: Remove extra debugging output. - -2002-01-13 Daniel Jacobowitz <drow@mvista.com> - - * gdb.c++/demangle.exp: Accept slightly dubious v2 demangler result - for slightly dubious v2 mangled string. - -2002-01-13 Daniel Jacobowitz <drow@mvista.com> - - * gdb.base/completion.exp: Expand ${srcdir} to an absolute path. - -2002-01-10 Jason Merrill <jason@redhat.com> - - * gdb.c++/namespace.exp: Accept trailing const for 'this'. - - * gdb.c++/classes.exp: Accept 'A const' or 'const A' in copy - constructors. - * gdb.c++/derivation.exp: Likewise. - * gdb.c++/templates.exp: Likewise. - * gdb.c++/virtfunc.exp: Likewise. - -2002-01-10 Michael Snyder <msnyder@redhat.com> - - * gdb.c++/namespace.exp: Accept both '\0' and '\000'. - -2002-01-08 Michael Snyder <msnyder@redhat.com> - - * gdb.base/gcore.exp: New test for generate-core-file command. - * gdb.base/gcore.c: Testcase for above. - * gdb.threads/gcore-thread.exp: New test for gcore (threaded). - -2002-01-08 Jason Merrill <jason@redhat.com> - - * gdb.c++/userdef.cc: Use <iostream> instead of <iostream.h>. - -2002-01-07 Fred Fish <fnf@redhat.com> - - * gdb.c++/overload.exp: Remove unconditional xfails for: - print foo_instance1.overloadargs(1) - print foo_instance1.overloadargs(1, 2) - print foo_instance1.overloadargs(1, 2, 3) - print foo_instance1.overloadargs(1, 2, 3, 4) - print foo_instance1.overloadargs(1, 2, 3, 4, 5) - print foo_instance1.overloadargs(1, 2, 3, 4, 5, 6) - print foo_instance1.overloadargs(1, 2, 3, 4, 5, 6, 7) - print foo_instance1.overloadargs(1, 2, 3, 4, 5, 6, 7, 8) - print foo_instance1.overloadargs(1, 2, 3, 4, 5, 6, 7, 8, 9) - print foo_instance1.overloadargs(1, 2, 3, 4, 5, 6, 7, 8, 9, 10) - print foo_instance1.overloadargs(1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11) - print foo_instance1.overload1arg() - print foo_instance1.overload1arg((char)arg2) - print foo_instance1.overload1arg((signed char)arg3) - print foo_instance1.overload1arg((unsigned char)arg4) - print foo_instance1.overload1arg((int)arg7) - print foo_instance1.overload1arg((unsigned int)arg8) - print foo_instance1.overload1arg((float)arg11) - print foo_instance1.overload1arg((double)arg12) - -2002-01-07 Michael Snyder <msnyder@redhat.com> - - * gdb.base/huge.exp: New test. Print a very large target data object. - (skip_huge_test): New test variable. Define if you want to skip this - test. The test reads an 8 megabyte data object from the target, so it - might be very time consuming on remote targets with a slow connection. - * gdb.base/huge.c: New file. Test case for above. - -2002-01-07 Fred Fish <fnf@redhat.com> - - * gdb.c++/derivation.exp: Remove gcc xfails for g_instance.afoo, - g_instance.bfoo, and g_instance.cfoo. - -Mon Jan 7 12:22:18 2002 Jeffrey A Law (law@redhat.com) - - * gdb.base/break.c (multi_line_if_conditional): New function. - (multi_ilne_while_conditional): Likewise. - * gdb.base/break.exp: Verify that a breakpoint on a multi-line - IF or WHILE condition puts the breakpoint at the start of - the condition. - - * gdb.base/selftest.exp (backtrace through signal handler): Remove - hppa*-*-hpux* expected failure. - * gdb.base/structs.exp (do_function_calls): Similarly. - - * gdb.c++/annota2.exp (watch triggered on a.x): Handle hardware - watchpoints. - -2002-01-06 Andrew Cagney <ac131313@redhat.com> - - Fix PR gdb/66. - * gdb.base/structs.exp: Replace skip for a29k with skip for - gdb,cannot_call_functions. - * gdb.base/call-ar-st.exp: Remove references to a29k in comments. - * gdb.base/callfuncs.exp: Ditto. - * gdb.base/call-rt-st.exp: Ditto. - * gdb.base/call-strs.exp: Ditto. - * gdb.base/callfwmall.exp: Ditto. - * gdb.base/scope.exp: Obsolete xfail a29k. - * gdb.c++/misc.exp: Ditto. - * gdb.c++/cplusfuncs.exp: Ditto. - * gdb.base/ptype.exp: Ditto. - * gdb.base/printcmds.exp: Ditto. - * gdb.base/opaque.exp: Ditto. - * gdb.base/list.exp: Ditto. - * gdb.base/funcargs.exp: Ditto. - * gdb.base/default.exp: Ditto. - -2002-01-04 Michael Snyder <msnyder@redhat.com> - - * gdb.base/info-proc.exp: New file, test for "info proc" cmd. - * gdb.base/maint.exp: Add tests for maint info sections options. - -Fri Dec 21 09:42:11 2001 Jeffrey A Law (law@redhat.com) - - * gdb.base/default.exp: Remove bogus hppa*-hp-hpux* xfails. - -2001-12-20 Corinna Vinschen <vinschen@redhat.com> - - * gdb.asm/arm.inc: New file. - * gdb.asm/asm-source.exp: Add arm targets. - * gdb.asm/configure.in: Ditto. - * gdb.asm/configure: Recreated from configure.in. - -Thu Dec 20 09:54:36 2001 Jeffrey A Law (law@redhat.com) - - * gdb.hp/gdb.defects/bs15503.exp: Only run this test if compiling - with HP's compiler. - * gdb.hp/gdb.objdbg/objdbg01.exp: Likewise. - * gdb.hp/gdb.objdbg/objdbg02.exp: Likewise. - * gdb.hp/gdb.objdbg/objdbg03.exp: Likewise. - * gdb.hp/gdb.objdbg/objdbg04.exp: Likewise. - - * gdb.hp/gdb.defects/solib-d.exp: Update to handle building with - either HP's compilers or GCC. - - * gdb.hp/gdb.base-hp/hwwatchbus.exp: Allow inferior to get either - a SIGBUS or SIGSEGV. - - * gdb.hp/gdb.base-hp/so-thresh.exp: Remove useless send_user command. - - * gdb.hp/gdb.defects/bs14602.exp: Revamp slightly so that test - can be compiled with either HP's compiler or GCC. - - * gdb.hp/gdb.threads-hp/usrthbasic.exp: Disable completely. - * gdb.hp/gdb.threads-hp/usrthcore.exp: Disable completely. - * gdb.hp/gdb.threads-hp/usrthfork.exp: Disable completely. - - * gdb.hp/gdb.base-hp/so-thresh.exp: Update text in expect strings - to match current gdb output. Update due to using auto-solib-limit - for limiting instead of overloading auto-solib-add. - * gdb.hp/gdb.base-hp/so-thresh.mk: Always use "cc" to build the - test program. - - * gdb.c++/templates.exp: Use "hppa64-*-*", not "hppa2.0w-*-*" - * gdb.hp/gdb.base-hp/dollar.exp: Likewise - * gdb.hp/gdb.base-hp/pxdb.exp: Likewise. - * gdb.hp/gdb.base-hp/reg-pa64.exp: Likewise. - * gdb.hp/gdb.base-hp/reg.exp: Likewise. - * gdb.hp/gdb.compat/xdb3.exp: Likewise. - * gdb.hp/gdb.defects/bs15503.exp: Likewise. - * gdb.hp/gdb.objdbg/objdbg01.exp: Likewise - * gdb.hp/gdb.objdbg/objdbg02.exp: Likewise - * gdb.hp/gdb.objdbg/objdbg03.exp: Likewise - * gdb.hp/gdb.threads-hp/usrthbasic.exp: Likewise. - * gdb.hp/gdb.threads-hp/usrthcore.exp: Likewise. - * gdb.hp/gdb.threads-hp/usrthfork.exp: Likewise. - - * gdb.base/annota1.exp: Expect failure for hpux11 when posting - a SIGTRAP to the inferior. - -2001-12-19 Corinna Vinschen <vinschen@redhat.com> - - * gdb.asm/asm-source.exp: Drop setting link-flags for xstormy16. - Substitute call to target_link by call to gdb_compile. - -Wed Dec 19 14:10:57 2001 Jeffrey A Law (law@redhat.com) - - * gdb.base/break.exp: Fix HP specific search string when testing - backtracing in a called function. - - * gdb.base/constvars.exp: Only set lang to C++ if we're - compiling the test with HP's compilers. - * gdb.base/volatile.exp: Similarly. - -2001-12-19 Jim Blandy <jimb@redhat.com> - - * gdb.base/printcmds.exp: Expect the null character to be printed - as '\0', and the '\013' to be printed as '\v'. - * gdb.base/callfuncs.exp ("backtrace at nested call level 4"): Same. - * gdb.base/setvar.exp: Same. - -2001-12-17 Jim Blandy <jimb@redhat.com> - - * gdb.base/completion.exp: Rather than completing very long - filenames, which can make the readline library produce output we - don't recognize, cd to the directory first, and then complete - using nice, short relative paths. - - * gdb.base/completion.exp: On some systems, there is, in fact, a - variable named `b' in scope, since GDB treats all static - variables as being in scope. So use `no_var_named_this' - instead of `b'. - - * gdb.base/corefile.exp: Recognize the message saying that GDB - can't find the core file's registers as a failure. - -2001-12-13 Jackie Smith Cashion <jsmith@redhat.com> - - * gdb.base/commands.exp (user_defined_command_test): Make "show user" - test expect string more specific. - -2001-12-13 Corinna Vinschen <vinschen@redhat.com> - - * gdb.asm/asm-source.exp: Add support for xstormy16. - * gdb.asm/configure.in: Ditto. - * gdb.asm/configure: Rebuild. - * gdb.asm/xstormy16.inc: New file. - -2001-12-10 Fred Fish <fnf@redhat.com> - - * gdb.base/maint.exp: Update to match changes in type dumping code. - -2001-12-10 Jim Blandy <jimb@redhat.com> - - * gdb.asm/asm-source.exp (info symbol): Anchor the pattern - matching the entry point symbol's name at the beginning of the - line. - -2001-12-07 Daniel Jacobowitz <drow@mvista.com> - - * gdb.c++/classes.exp, gdb.c++/derivation.exp, - gdb.c++/inherit.exp, gdb.c++/method.exp, - gdb.c++/namespace.exp, gdb.c++/templates.exp, - gdb.c++/userdef.exp, gdb.c++/virtfunc.exp: Updates for v3 demangler - and class layout support. - -2001-12-07 Daniel Jacobowitz <drow@mvista.com> - - * gdb.c++/classes.exp: Add test for static member function. - * gdb.c++/misc.cc: Add class with static member function. - -2001-12-07 Jim Blandy <jimb@redhat.com> - - If GDB says it can't find the struct the function returned, report - those tests as `unsupported'. - * gdb.base/call-rt-st.exp (print_struct_call): New function. - Rewrite subsequent tests to use it. - - If GDB says it can't find the struct the function returned, report - those tests as `unsupported'. - * gdb.base/structs.exp (call_struct_func): New function. - (do_function_calls): Use call_struct_func to call the functions - returning structs. - - * gdb.base/callfuncs.exp: The stabs generated by GCC don't tell us - whether functions are prototyped or not, so we can't possibly pass - arguments to t_float_values2 properly. - - * gdb.base/break.exp: (test_next_with_recursion): Don't change the - value of `timeout' for targets other than the mips*tx39-*. - -2001-12-06 Michael Snyder <msnyder@redhat.com> - - * gdb.asm/asm-source.exp: Add tests for info target, info symbol, - and detect whether the start symbol has a leading underscore. - -2001-12-04 Jim Blandy <jimb@redhat.com> - - * gdb.base/completion.exp: Clarify indentation. - -2001-12-03 Jim Blandy <jimb@redhat.com> - - * gdb.asm/s390.inc (gdbasm_datavar): Use `.long' to create `int' - variables on the S/390, not `.word'. - -2001-11-30 Jim Blandy <jimb@redhat.com> - - Add assembly-source tests for s390-ibm-linux. - * gdb.asm/s390.inc: New file. - * gdb.asm/configure.in, gdb.asm/asm-source.exp: Add clauses for - the S/390 architecture. - * gdb.asm/configure: Regenerated. - -2001-11-30 Michael Snyder <msnyder@redhat.com> - - * gdb.asm/asm-source.exp: Add tests for list, search, finish, return, - next, info source, info sources, info line, global and static - variables, and static functions. - * gdb.asm/common.inc: New macro gdbasm_datavar (default definition). - * gdb.asm/i386.inc: Override default definition of gdbasm_datavar. - * gdb.asm/asmsrc1.s: Add a static function and some variables. - * gdb.asm/asmsrc2.s: Make foo2 call foo3 twice (to test 'next'). - * gdb.asm/d10v.inc (gdbasm_enter): Set up frame pointer. - (gdbasm_leave): Restore frame pointer. - (gdbasm_startup): Copy stack set-up from crt0.S. - -2001-11-26 Fernando Nasser <fnasser@redhat.com> - - From 2001-11-12 Jackie Smith Cashion <jsmith@redhat.com>: - * gdb.base/callfuncs.c (t_structs_a): Do not return a pointer - to a local (non-static) variable. Copy tstruct.a to a static buffer - and return a pointer to that buffer. - * gdb.base/callfwmall.c (t_structs_a): Ditto. - -2001-11-24 Mark Kettenis <kettenis@gnu.org> - - * gdb.asm/configure.in: Fix recognition of ix86 target. - * gdb.asm/configure: Regenerate. - -2001-11-21 Michael Snyder <msnyder@redhat.com> - - * gdb.asm/sparc.inc: New file. - * gdb.asm/asm-source.exp: Recognize sparc target. - * gdb.asm/configure.in: Recognize sparc target. - * gdb.asm/configure: Regenerate. - -2001-11-21 Michael Snyder <msnyder@redhat.com> - - * gdb.asm/m32r.inc: New file. - * gdb.asm/asm-source.exp: Recognize m32r target. - * gdb.asm/configure.in: Recognize m32r target. - * gdb.asm/configure: Regenerate. - -2001-11-20 Michael Snyder <msnyder@redhat.com> - - * gdb.asm/i386.inc: New file. - * gdb.asm/asm-source.exp: Recognize ix86 target. - * gdb.asm/configure.in: Recognize ix86 target. - * gdb.asm/configure: Regenerate. - - * gdb.c++/namespace.exp: Fix quotes in output messages. - -2001-11-14 Michael Snyder <msnyder@redhat.com> - - * gdb.base/code-expr.exp: New file. Tests use of the "@code" - qualifier in a type cast expression, to designate an address - in the instruction space (Harvard architecture). - -2001-11-13 Michael Snyder <msnyder@redhat.com> - - * gdb.base/cvexpr.c, gdb.base/cvexpr.exp: New files. - Tests for expressions using 'const' and 'volatile'. - -2001-11-13 Corinna Vinschen <vinschen@redhat.com> - - * gdb.asm/asm-sources.exp: Allow defining linker flags. - -2001-11-12 Daniel Jacobowitz <drow@mvista.com> - - * lib/mi-support.exp (mi_run_to_helper): Move comments - outside of gdb_expect. - -2001-11-11 Daniel Jacobowitz <drow@mvista.com> - - * lib/mi-support.exp: (mi_run_to_helper, mi_run_to, - mi_step_to, mi_next_to, mi_continue_to, mi_finish_to, - mi0_step_to, mi0_next_to, mi0_continue_to, mi0_finish_to, - mi0_run_to): New functions. - * gdb.mi/mi-simplerun.exp: Use them. - * gdb.mi/mi0-simplerun.exp: Likewise. - * gdb.mi/mi-var-cmd.exp: Likewise. - * gdb.mi/mi0-var-cmd.exp: Likewise. - -2001-11-10 Andrew Cagney <ac131313@redhat.com> - - * gdb.asm/asmsrc1.s: Add ``gdbasm_'' prefix to all macros. - * gdb.asm/asmsrc2.s, gdb.asm/d10v.inc: Update. - -2001-11-09 Andrew Cagney <ac131313@redhat.com> - - * gdb.base/restore.exp: Include $expected value in restored test - message. - -2001-11-09 Andrew Cagney <ac131313@redhat.com> - - * gdb.asm/asm-source.exp: Supress file, instead of skip, when not - implemented. - -2001-11-08 Michael Snyder <msnyder@redhat.com> - - * gdb.base/callfuncs.exp: Add tests for nested call dummies. - Add pass/fail message for stop at breakpoint in call dummy function. - -2001-11-07 Michael Snyder <msnyder@redhat.com> - - * gdb.c++/templates.exp (test_template_breakpoints): - If we get an overload menu, but it does not match what - we expect, we still need to issue the "cancel" command. - * gdb.c++/templates.exp: Replace "void \\*" with "void ?\\*", - making the whitespace optional. Argument for "new" may be - "unsigned" as well as "unsigned int/long". - * gdb.c++/templates.exp: Replace "const &" with "const ?&", - making the whitespace optional. Also replace "(void) with - "((void|)), making the keyword "void" optional. - * gdb.c++/virtfunc.exp: Replace "const &" with "const ?&", - making the whitespace optional. Also replace "(void) with - "((void|)), making the keyword "void" optional. - * gdb.base/callfuncs.c (t_float_values): This function must - _not_ be prototyped, and the following function (t_float_values2) - must be prototyped (if the compiler supports it), so that GDB - can be tested against both cases. Usually one case involves - promotion of float to double, while the other does not. - * gdb.base/callfwmall.c: Ditto. - * gdb.asm/asm-source.exp (bt ALL in foo2): Accept a backtrace that - includes a stack frame for "start". - -2001-11-05 Jim Blandy <jimb@redhat.com> - - * gdb.stabs/weird.exp: Delete "p v_comb" test. It assumes that - pointers are 32 bits long, and that offsets of relocs are always - stored in the data (REL-style), and not in the reloc entry itself - (RELA-style). - * gdb.stabs/weird.def (v_comb, v_comb_shared): Remove symbols and - stabs. - -2001-11-01 Michael Snyder <msnyder@redhat.com> - - * gdb.c++/cplusfuncs.exp: Fix conflicts between operator names - and regular expression operators by using quoting. - -2001-10-31 Michael Snyder <msnyder@redhat.com> - - * gdb.c++/overload.exp: Select overloadfnarg(void) or overloadfnarg(), - depending on what the symbol table contains. - * gdb.c++/derivation.exp: Accept both "foo(void)" and "foo()" in - the output of the ptype command. Similarly, accept both "const &" - and "const&". - -2001-10-31 Corinna Vinschen <vinschen@redhat.com> - - * gdb.base/miscexprs.c (main): Add usage of preprocessor - symbol `STORAGE' to allow to choose the storage class of - the local datastructures. - * gdb.base/miscexprs.exp: Handle setting a `-DSTORAGE=...' - compiler directive. - -2001-10-30 Michael Snyder <msnyder@redhat.com> - - * gdb.base/jump.exp: Allow it to run for all targets. - -2001-10-29 Corinna Vinschen <vinschen@redhat.com> - - * gdb.base/call-ar-st.c (print_double_array): Match for loop - with new double_array size. - (main): Change storage class of all local variables to static. - Reduce size of double_array to 9. - * gdb.base/call-ar-st.exp: Increase timeout value. - Change expected output for double array to match new size in - call-ar-st.c. - -2001-10-29 Corinna Vinschen <vinschen@redhat.com> - - * gdb.base/ending-run.exp: Create identical output when passing - `step to end of run' case. Add regular expression branch satisfying - Stormy16 target. - -2001-10-28 Mark Kettenis <kettenis@gnu.org> - - * gdb.base/interrupt.exp: Treat SIGILL similar to SIGSEGV such - that we catch the expected failure under Linux/x86. - -2001-10-29 Orjan Friberg <orjanf@axis.com> - - * gdb.base/setvar.exp: Escape curly braces. - * gdb.stabs/weird.exp: Ditto. - -2001-10-27 Daniel Jacobowitz <drow@mvista.com> - - * gdb.mi/mi-hack-cli.exp: Remove excess newlines from test strings. - * gdm.mi/mi0-hack-cli.exp: Likewise. - -2001-10-25 Andrew Cagney <ac131313@redhat.com> - - * gdb.stabs/weird.exp: Unify ``variable VAR printed properly'' - messages. - -2001-10-21 Andrew Cagney <ac131313@redhat.com> - - * lib/mi-support.exp (mi_gdb_start): Don't require MI_OUT when - checking MI enabled. - -2001-10-09 Corinna Vinschen <vinschen@redhat.com> - - * gdb.base/maint.exp: Treat $EXEEXT as optional in output. - -2001-10-04 Frank Ch. Eigler <fche@redhat.com> - - * lib/insight-support.exp (gdbtk_start): Don't exit dejagnu - if gdb child process crashes, just signal an error. - -2001-10-02 Jim Blandy <jimb@redhat.com> - - * lib/gdb.exp (test_xfail_format): Simplify. - - * lib/gdb.exp (setup_xfail_format): Don't forget to put a `$' in - front of the variable name `format'. Simplify `if'. - -2001-10-01 Daniel Jacobowitz <drow@mvista.com> - - * gdb.threads/pthreads.exp: Wait for output and delay - before sending ^C. - -2001-10-01 Daniel Jacobowitz <drow@mvista.com> - - * gdb.mi/mi-var-display.exp (continue to incr_a): Recognize - some incorrect output instead of timing out. - * gdb.mi/mi-var-display.exp (continue to incr_a): Likewise. - -2001-09-28 Corinna Vinschen <vinschen@redhat.com> - - * gdb.base/volatile.exp (local_compiler_xfail_check): Change qux2 - check to allow additional `int'. - -2001-09-27 Daniel Jacobowitz <drow@mvista.com> - - * gdb.base/completion.exp: Remove incorrect 'p "a' test. - Add tests for 'p "break' (pass) and 'p "break.' (xfail). - -2001-09-27 Michael Snyder <msnyder@redhat.com> - - * lib/gdb.exp (test_debug_format): New proc. - (setup_xfail_format): Use new proc test_debug_format. - * gdb.base/constvars.exp (local_compiler_xfail_check): New - proc; use new service proc test_debug_format. - Replace all other "gcc_compiled" tests with this test. - * gdb.base/volatile.exp (local_compiler_xfail_check): New - proc; use new service proc test_debug_format. - Replace all other "gcc_compiled" tests with this test. - -2001-09-27 Michael Snyder <msnyder@redhat.com> - - * gdb.base/cvexpr.exp: New file. - * gdb.base/cvexpr.c: New file - Test for expressions using const and volatile keywords. - -2001-09-26 Corinna Vinschen <vinschen@redhat.com> - - * gdb.base/constvars.exp: Check for different orders of keywords - and additional "int" strings in output. - -2001-09-22 Andrew Cagney <ac131313@redhat.com> - - * gdb.base/maint.exp: Add "maintenance set/show" to list of valid - responses from "help maint". - -2001-09-19 Frank Ch. Eigler <fche@redhat.com> - - * lib/insight-support.exp (_gdbtk_xvfb_init): Set DISPLAY - to localhost:NNN instead of :NNN, in case Xvfb is listening - only on TCP. - -2001-09-19 Corinna Vinschen <vinschen@redhat.com> - - * gdb.base/recurse.exp: When checking leaving the watchpoint - scope, recognize when gdb is in function's epilogue and pass. - -2001-09-18 Keith Seitz <keiths@redhat.com> - - * lib/insight-support.exp (_gdbtk_export_target_info): Add - support for running tests against sid targets. - (gdbtk_done): Ditto. - -2001-09-18 Corinna Vinschen <vinschen@redhat.com> - - * gdb.base/ending-run.c (main): Set stdout buffersize - to the same reasonable value for any target. - * gdb.base/ending-run.exp: Add a regular expression - to make testsuite happy on Sanyo Stormy16 target. - -2001-09-17 Corinna Vinschen <vinschen@redhat.com> - - * gdb.base/display.c (do_loops): Add float variable `f'. - Increment f in loop. - * gdb.base/display.exp: Increment timeout by 60 seconds. - Change float display test to use variable `f'. - -2001-09-17 Jim Blandy <jimb@redhat.com> - - * gdb.base/restore.exp: Use temporary breakpoints, to avoid - overflowing the limited breakpoint tables on some ROM monitors - (like the ROM68K). - -2001-09-15 Frank Ch. Eigler <fche@redhat.com> - - * lib/insight-support.exp (_gdbtk_xvfb_init): Start Xvfb with - the "-ac" (disable access control) flag. - -2001-08-30 Jeff Holcomb <jeffh@redhat.com> - - * gdb.base/remote.c: Use a small buffer for targets with 16-bit - ints. - -2001-08-30 Keith Seitz <keiths@redhat.com> - - * lib/gdb.exp: Move all insight-related functionality into - separate file. - * lib/insight-support.exp: New file. - -2001-08-29 Frank Ch. Eigler <fche@redhat.com> - - * config/sid.exp (sid_start): Never set sid verbosity; disable - expect_background {} that consumed its stdout; tolerate </dev/null. - Attempt to set endianness override in "sid" protocol mode. Cleanup. - -2001-08-18 Andrew Cagney <ac131313@redhat.com> - - * lib/mi-support.exp (mi_gdb_start): If a remote target, use the - CLI jump command to start it. - (mi_run_to_main): Fail immediatly when unexpected output. - -2001-08-18 Andrew Cagney <ac131313@redhat.com> - - * lib/mi-support.exp (mi_gdb_start): Move call to sid_start to - beginning of function. Fix PR gdb/191. - -2001-08-16 Frank Ch. Eigler <fche@redhat.com> - - * config/sid.exp (sid_start): Don't warn if we cannot figure out - what to force sid endianness to. - -2001-08-15 Keith Seitz <keiths@redhat.com> - - * lib/gdb.exp (gdbtk_start): Don't set environment - variables for TCL_LIBRARY and friends. Insight will - now figure these out for itself. - -2001-08-02 Michael Snyder <msnyder@redhat.com> - - * gdb.base/completion.exp: Remove the symbol "a64l" from - the expect string; this is target-specific, and not related - to what is being tested. - -2001-08-02 Dave Brolley <brolley@redhat.com> - - * config/sid.exp: Rename gdb-socket to cpu-gdb-socket. - -2001-07-25 Michael Snyder <msnyder@redhat.com> - - * gdb.base/consecutive.exp: New file. Test stepping over - breakpoints on consecutive instructions. - * gdb.base/consecutive.c: New file. - - * gdb.base/call-rt-st.exp: Use double-backslash to quote - curly braces in regular expressions. - -2001-07-25 Michael Snyder <msnyder@redhat.com> - - * gdb.base/ending-run.exp: Accept "Program exited normally" as - legitimate output from stepping out of main. - -2001-07-22 Keith Seitz <keiths@redhat.com> - - * lib/gdb.exp (_gdbtk_xvfb_init): If GDB_DISPLAY is - the empty string, do not run the tests. - -2001-07-17 Stephane Carrez <Stephane.Carrez@worldnet.fr> - - * gdb.base/long_long.exp: Detect size of pointer. Take into - account 2-byte pointers when testing for p/a results. - -2001-07-17 Stephane Carrez <Stephane.Carrez@worldnet.fr> - - * gdb.base/remote.c (RANDOM_DATA_SIZE): New define, defaults to 48K - and defined to 1K for m68hc11. - (random_data): Reduce table to 1K for embedded platforms (68hc11). - * gdb.base/remote.exp (get_sizeof): New function from sizeof.exp. - (sizeof_random_data): New variable to tell the size of the data table; - don't test past this size; always run to main. - -2001-07-16 Stephane Carrez <Stephane.Carrez@worldnet.fr> - - * gdb.base/return2.exp: return of long long and double fails for - 68HC11; don't execute these tests on that platform. - * gdb.base/return.exp: Return of a double fails for 68hc11. - -2001-07-16 Stephane Carrez <Stephane.Carrez@worldnet.fr> - - * call-ar-st.exp: Use gdb_skip_float_test to avoid executing - tests that print a float. - * call-rt-st.exp: Likewise. - -2001-07-12 Mark Kettenis <kettenis@gnu.org> - - * gdb.base/so-impl-ld.exp: Remove stray space that prevented - running this test on Linux. - -2001-06-24 Michael Chastain <chastain@redhat.com> - - * gdb.base/arithmet.exp: Remove some tests to make all test names - unique. - -2001-07-03 Michael Snyder <msnyder@redhat.com> - - * gdb.c++/classes.exp: Accept both "foo(void)" and "foo()" in - the output of the ptype command. - -2001-07-02 Michael Snyder <msnyder@redhat.com> - - * gdb.base/completion.exp: Don't assume that break.c is the only - source file that may contain functions named "marker". - * gdb.base/corefile.exp: Quote the curly braces in regexp. - -2001-06-28 Andrew Cagney <ac131313@redhat.com> - - * gdb.disasm/Makefile.in (clean mostlyclean): Add h8300s to list - of files to delete. - - From 2000-06-15 Kazu Hirata <kazu@hxi.com>: - * gdb.disasm/h8300s.exp: New file. - gdb.disasm/h8300s.s: Likewise. - -2001-06-27 Andrew Cagney <ac131313@redhat.com> - - * lib/mi-support.exp (mi_delete_breakpoints): Accept mi1 format - empty breakpoint tables. - -2001-06-25 Andrew Cagney <ac131313@redhat.com> - - * lib/mi-support.exp: Update args=... part of stop-reason - patterns. Accept either a list or a tuple. - -2001-06-23 Andrew Cagney <ac131313@redhat.com> - - * lib/mi-support.exp: Remove local emacs variable defining - change-log-default-name. - -2001-06-22 Michael Chastain <chastain@redhat.com> - - * gdb.base/arithmet.exp: Use gdb_test instead of send_gdb/gdb_expect. - This is operationally compatible with the previous version. - -2001-06-13 Jim Blandy <jimb@redhat.com> - - * lib/gdb.exp (gdb_test): Doc fix. - -2001-06-10 Michael Chastain <chastain@redhat.com> - - * gdb.base/exprs.exp: Remove a duplicate test. - -2001-06-06 Jim Blandy <jimb@redhat.com> - - * gdb.base/return2.exp (main): Use values to test float and double - returns that are not NaN's, to avoid being confused by IEEE - comparison rules. - -2001-06-04 Michael Snyder <msnyder@redhat.com> - - * gdb.threads/pthreads.exp (check_control_c): Return 0 for success, - non-zero if control_c fails. Terminate the test on failure, - rather than wait for 12 more tests to time out. - -2001-06-06 Jim Blandy <jimb@redhat.com> - - * gdb.base/exprs.exp ("sizeof (long long) > sizeof (long) (true)"): - Don't forget to match the GDB prompt. - - * gdb.trace/gdb_c_test.c, actions.c: Fix misspellings. - -2001-06-04 Jim Blandy <jimb@redhat.com> - - * gdb.base/help.exp: Update pattern to exclude `print-load-map' - command. - -2001-05-31 Kevin Buettner <kevinb@redhat.com> - - * gdb.base/annota1.exp (info break): Match four or more spaces - after "Address". - -2001-05-31 Michael Chastain <chastain@redhat.com> - - * gdb.c++/cplusfuncs.cc (dm_type_char_star): Remove superfluous cast. - (dm_type_int_star): Likewise. - (dm_type_long_star): Likewise. - (dm_type_void_star): Likewise. - -2001-05-29 Kevin Buettner <kevinb@redhat.com> - - * gdb.base/completion.exp (INPUTRC): Set this environment variable - to a known value in order to get consistent results regardless - of the setting of INPUTRC or the presence or contents of .inputrc. - -2001-05-24 Michael Snyder <msnyder@redhat.com> - - * gdb.threads/linux-dp.exp: Remove assumptions about thread ordering. - Don't require that the main thread and the manager thread are the - first in the list. - - * gdb.threads/pthreads.exp (test_startup): Relax test for thread - debugging. If test fails, issue an "unsupported" not a "fail". - -2001-05-24 Jim Blandy <jimb@redhat.com> - - Don't assume that short is shorter than int. - * gdb.base/exprs.exp ("print unsigned short == (~0)"): Don't - assume that shorts are smaller than ints. On a 16-bit machine, - this isn't true. - ("print unsigned char == (~0)"): Add test that verifies that ~0, - an int, is not equal to ~0 stored in an unsigned char. This tests - the same thing that the previous test meant to, but works on - 16-bit machines, too. - ("print unsigned char != (~0)"): Same test, complemented. - -2001-05-24 Michael Snyder <msnyder@redhat.com> - - * gdb.threads/pthreads.exp (all_threads_running): Add an explicit - test for (full_coverage == 0). This makes the test run faster, - and prevents dejagnu getting out of step. - -2001-05-23 Kevin Buettner <kevinb@redhat.com> - - * gdb.base/finish.exp (finish_void): Revise pattern for - stopping on the call statement to not permit stopping at - the start of the instructions comprising the call sequence. - -2001-05-19 Michael Chastain <chastain@redhat.com> - - * gdb.base/callfuncs.exp: Make all test names unique. - * gdb.base/commands.exp: Make all test names unique. - * gdb.base/condbreak.exp: Make all test names unique. - * gdb.base/dbx.exp: Make all test names unique. - * gdb.base/default.exp: Make all test names unique. - * gdb.base/define.exp: Make all test names unique. Conform some FAIL - and TIMEOUT messages to their corresponding PASS message. - * gdb.base/ending-run.exp: Make all test names unique. - * gdb.base/long_long.exp: Remove duplicate test. - -2001-05-21 Kevin Buettner <kevinb@redhat.com> - - * gdb.base/finish.exp (finish_void): Allow "finish" command to - stop on the call statement as well as the statement after the - call. - -2001-05-21 Michael Snyder <msnyder@redhat.com> - - * gdb.base/long_long.exp: Allow for targets with 4-byte short. - -2001-05-10 Elena Zannoni <ezannoni@redhat.com> - - * gdb.base/completion.exp: Revamp test. Make it execute on all - platforms. - -2001-05-10 Elena Zannoni <ezannoni@redhat.com> - - * config/gdbserver.exp (gdb_load): Handle the case - in which the arguments to gdbserver are given in the - baseboard configuration file. - Also handle the case in which the server needs to do a - load. - -2001-05-07 Keith Seitz <keiths@cygnus.com> - - * lib/gdb.exp (gdbtk_initialize_display): New proc which will - set up the display for testing. - (gdbtk_start): Convert all paths to paths that tcl will like. - Export target information to environment. - (_gdbtk_xvfb_init): New proc to start Xvfb if available and - necessary. - (_gdbtk_xvfb_exit): New proc to kill Xvfb if necessary. - (to_tcl_path): New proc to convert a given pathname into - a path acceptible as an argument to a tcl command. - (_gdbtk_export_target_info): New proc to export target info - into the environment for gdbtk testing. - (gdbtk_done): New proc to signal end-of-test. - -2001-05-06 Jim Blandy <jimb@redhat.com> - - * restore.c: Make the code of caller0 correspond to its comment. - -2001-05-03 Michael Snyder <msnyder@redhat.com> - - * config/sid.exp (gdb_target_sid): Check for error messages. - On error or timeout, don't make expect exit (which will terminate - all subsequent tests); instead just make gdb exit. - (gdb_load): Check for error messages. On error or timeout, - return a negative value. - -2001-04-24 Jim Blandy <jimb@redhat.com> - - * gdb.c++/templates.exp: If we see the prompt for the overload - list, but we haven't recognized any of the longer patterns, - arrange for this test to fail, not hang. - - * gdb.c++/classes.exp (ptype class A): Tolerate whitespace - variations. - -2001-04-22 Michael Chastain <chastain@redhat.com> - - * gdb.c++/local.exp: Use the 'runto' library function. - * gdb.c++/namespace.exp: Likewise. - * gdb.c++/overload.exp: Likewise. - -2001-03-26 Kevin Buettner <kevinb@redhat.com> - - * gdb.base/Makefile.in (EXECUTABLES): Add step-line. - * gdb.base/step-line.exp: New file. Test step/next in presence of - #line directives. - * gdb.base/step-line.c: New file. Test program for the above. - * gdb.base/step-line.inp: New file. We pretend that this file has - been transformed by some other tool into step-line.c. - -2001-03-21 Jim Blandy <jimb@redhat.com> - - * gdb.c++/userdef.exp: Check that GDB tolerates whitespace in - unmangled operator names. - -2001-03-20 Jim Blandy <jimb@redhat.com> - - * gdb.threads/linux-dp.exp: Recognize an additional message - generated by GDB when it doesn't understand how to debug threads - on the target system. - -2001-03-19 Andrew Cagney <ac131313@redhat.com> - - * gdb.mi/mi-console.exp: Document ``Hello'' as a known bug. - -2001-03-12 Michael Chastain <chastain@redhat.com> - - * gdb.c++/derivation.exp: Use the 'runto' library function. - -2001-03-12 Michael Chastain <chastain@redhat.com> - - * gdb.c++/annota2.exp: Fix regular expression for "post-query". - -2001-02-24 Michael Chastain <chastain@redhat.com> - - * gdb.c++/ref-types.exp: Change handwritten code to library - function 'runto'. - -2001-03-16 Orjan Friberg <orjanf@axis.com> - - * gdb.base/signals.exp: Set count to 0 explicitly. - -2001-03-15 Mark Salter <msalter@redhat.com> - - * config/monitor.exp (gdb_target_cmd): Add explicit error return. - (gdb_target_monitor): Add check of gdb_target_cmd return value. - (gdb_load): Add support for additional target_info: gdb_download_size - and gdb_load_timeout. - -Thu Mar 8 16:06:00 2001 David Taylor <taylor@redhat.com> - - * gdb.base/annota1.exp: Move test of isnative to earlier in the - file -- to prevent failing when the compile fails but we have no - intention of running the tests anyway. - - * gdb.base/long_long.exp: Test target_info for no_long_long, skip - tests if set. - - * gdb.base/maint.exp: Support 2 byte integers as well as 4 byte - integers. - - * gdb.c++/ctti.exp: Skip tests if skip_cplus_tests returns true. - * gdb.c++/namespace.exp: Ditto. - -2001-03-07 Orjan Friberg <orjanf@axis.com> - - * gdb.base/pointers.c: Don't assume doubles are >= 8 bytes. - * gdb.base/pointers.exp: Relax pattern match of decimals. - -2001-03-06 Kevin Buettner <kevinb@redhat.com> - - * Makefile.in, config/abug.exp, config/cfdbug.exp, - config/cpu32bug.exp, config/dve.exp, config/est.exp, - config/gdbserver.exp, config/hmsirom.exp, config/hppro.exp, - config/i960.exp, config/m32r.exp, config/mn10300-eval.exp, - config/monitor.exp, config/proelf.exp, config/rom68k.exp, - config/sh.exp, config/sid.exp, config/slite.exp, - config/sparclet.exp, config/udi.exp, config/unknown.exp, - config/vr4300.exp, config/vr5000.exp, config/vx.exp, - config/vxworks.exp, config/vxworks29k.exp, - gdb.asm/asm-source.exp, gdb.base/a2-run.exp, - gdb.base/all-bin.exp, gdb.base/annota1.exp, - gdb.base/arithmet.exp, gdb.base/assign.exp, - gdb.base/async.exp, gdb.base/attach.exp, - gdb.base/bitfields.exp, gdb.base/bitops.exp, - gdb.base/break.exp, gdb.base/call-ar-st.exp, - gdb.base/call-rt-st.exp, gdb.base/call-strs.exp, - gdb.base/callfuncs.exp, gdb.base/callfwmall.exp, - gdb.base/commands.exp, gdb.base/completion.exp, - gdb.base/cond-expr.exp, gdb.base/condbreak.exp, - gdb.base/constvars.exp, gdb.base/corefile.exp, - gdb.base/dbx.exp, gdb.base/default.exp, gdb.base/define.exp, - gdb.base/display.exp, gdb.base/ena-dis-br.exp, - gdb.base/ending-run.exp, gdb.base/environ.exp, - gdb.base/eval-skip.exp, gdb.base/exprs.exp, - gdb.base/finish.exp, gdb.base/foll-exec.exp, - gdb.base/foll-fork.exp, gdb.base/foll-vfork.exp, - gdb.base/funcargs.exp, gdb.base/help.exp, - gdb.base/interrupt.exp, gdb.base/jump.exp, gdb.base/list.exp, - gdb.base/logical.exp, gdb.base/long_long.exp, - gdb.base/maint.exp, gdb.base/mips_pro.exp, - gdb.base/miscexprs.exp, gdb.base/nodebug.exp, - gdb.base/opaque.exp, gdb.base/overlays.exp, gdb.base/page.exp, - gdb.base/pointers.exp, gdb.base/printcmds.exp, - gdb.base/ptype.exp, gdb.base/radix.exp, gdb.base/recurse.exp, - gdb.base/regs.exp, gdb.base/relational.exp, - gdb.base/remote.exp, gdb.base/reread.exp, - gdb.base/restore.exp, gdb.base/return2.exp, - gdb.base/scope.exp, gdb.base/sect-cmd.exp, - gdb.base/selftest.exp, gdb.base/setshow.exp, - gdb.base/setvar.exp, gdb.base/shlib-call.exp, - gdb.base/sigall.exp, gdb.base/signals.exp, - gdb.base/sizeof.exp, gdb.base/so-impl-ld.exp, - gdb.base/so-indr-cl.exp, gdb.base/solib.exp, - gdb.base/step-test.exp, gdb.base/structs.c, - gdb.base/structs.exp, gdb.base/structs2.exp, - gdb.base/term.exp, gdb.base/twice.exp, gdb.base/varargs.exp, - gdb.base/volatile.exp, gdb.base/watchpoint.exp, - gdb.base/whatis-exp.exp, gdb.base/whatis.exp, - gdb.c++/ambiguous.exp, gdb.c++/annota2.exp, - gdb.c++/anon-union.exp, gdb.c++/classes.exp, gdb.c++/ctti.exp, - gdb.c++/derivation.exp, gdb.c++/inherit.exp, - gdb.c++/local.exp, gdb.c++/member-ptr.exp, gdb.c++/method.exp, - gdb.c++/misc.exp, gdb.c++/namespace.exp, gdb.c++/overload.exp, - gdb.c++/ref-types.exp, gdb.c++/templates.exp, - gdb.c++/userdef.exp, gdb.c++/virtfunc.exp, - gdb.disasm/am33.exp, gdb.disasm/hppa.exp, - gdb.disasm/mn10200.exp, gdb.disasm/mn10300.exp, - gdb.fortran/types.exp, gdb.java/jmisc.exp, - gdb.java/jv-exp.exp, gdb.java/jv-print.exp, - gdb.stabs/weird.exp, gdb.threads/linux-dp.exp, - gdb.trace/actions.exp, gdb.trace/backtrace.exp, - gdb.trace/circ.exp, gdb.trace/collection.exp, - gdb.trace/deltrace.exp, gdb.trace/infotrace.exp, - gdb.trace/limits.exp, gdb.trace/packetlen.exp, - gdb.trace/passc-dyn.exp, gdb.trace/passcount.exp, - gdb.trace/report.exp, gdb.trace/save-trace.exp, - gdb.trace/tfind.exp, gdb.trace/tracecmd.exp, - gdb.trace/while-dyn.exp, gdb.trace/while-stepping.exp, - lib/gdb.exp, lib/mi-support.exp: Update/correct copyright - notices. - -2001-02-27 Michael Snyder <msnyder@cygnus.com> - - * gdb.base/varargs.c (find_max_double): Fix printf format string: - first arg is int not float. - -2001-02-22 Michael Snyder <msnyder@cygnus.com> - - * gdb.base/reread.exp: Unsupported for non-native targets; - doesn't work for remote debugging. - -2001-02-19 Fernando Nasser <fnasser@redhat.com> - - From Drew Moseley <dmoseley@redhat.com> - * gdb.base/ending-run.exp: Properly handle the BSP state when - stepping past the end of main. - -2001-02-19 John Moore <jmoore@redhat.com> - - * gdb.base/commands.exp (infrun_breakpoint_command_test): - Converted HPUX fix for non-expected items following multiple - step commands into general solution for all platforms. - -2001-02-18 Michael Chastain <chastain@redhat.com> - - * gdb.c++/classes.exp (do_tests): Change runto statements - from "runto 'foo(void)'" to "runto 'foo'". This makes the - statements demangler agnostic. - * gdb.c++/virtfunc.exp (do_tests): Likewise. - (gdb_virtfunc_restart): Likewise. - -2001-02-14 Michael Chastain <chastain@redhat.com> - - * gdb.c++/inherit.exp (do_tests): Change runto statements - from "runto 'foo(void)'" to "runto 'foo'". This makes the - statements demangler agnostic. - -Sun Feb 4 17:32:21 2001 Andrew Cagney <cagney@redhat.com> - - * gdb.threads/pthreads.exp: Unify pass/fail messages for - ``continue to bkpt at common_routine in thread 2'' and ``stopped - before calling common_routine 15 times'' tests. - -2001-02-11 Michael Chastain <chastain@redhat.com> - - * gdb.c++/cplusfuncs.cc (dm_type_char_star): New function. - Helps the test script figure out which demangler is in use. - (dm_type_foo_ref): Ditto. - (dm_type_int_star): Ditto. - (dm_type_long_star): Ditto. - (dm_type_unsigned_int): Ditto. - (dm_type_void): Ditto. - (dm_type_void_star): Ditto. - * gdb.base/cplusfuncs.exp (probe_demangler): New function. - Probe the gdb demangler and set variables to accommodate - formatting differences. - (info_func_regexp): New function. Same as info_func, but - matches against a regexp. - (info_func): Match against a literal string. - (print_addr_2): New function. Match against a literal string, - which can be different from the input to gdb. - (print_addr): Simply call print_addr_2 with the same argument twice. - (test_lookup_operator_functions): Use demangler formatting variables. - Blow away the xfails and workarounds for gnats gdb bug gdb/18. Sort - the tests in the same order as the C++ class declaration. - (test_paddr_operator_functions): Ditto. - (test_paddr_overloaded_functions): Ditto. - (test_paddr_hairy_functions): Use demangler formatting variables. - Add reference to gdb/19 for related tests. - (do_tests): Call probe_demangler. - -2001-01-30 Kevin Buettner <kevinb@redhat.com> - - * gdb.c++/templates.cc (printf): Remove unused function definition. - -2001-01-26 Felix Lee <flee@redhat.com> - - * sid.exp (sid_exit): Pass host, not target, to remote_close. - -2001-01-25 matthew green <mrg@redhat.com> - - * config/sid.exp (sid_start): Call `remote_push_conn' after firing - up sid. - (sid_exit): Call `remote_pop_conn' after GDB is gone. - -2001-01-25 matthew green <mrg@redhat.com> - - * config/sid.exp (sid_start): Use `remote_spawn' instead of `spawn.' - Deprecate $sid_spawn_id. - (sid_exit): Remove code necessary only for `spawn.' - -2001-01-25 matthew green <mrg@redhat.com> - - * config/sid.exp (sid_start): Handle sim,protocol of `sid.' - -2001-01-28 Michael Chastain <chastain@redhat.com> - - * gdb.c++/ovldbreak.exp (take_gdb_out_of_choice_menu): New proc - to call when tests fail. It takes gdb out of the overloaded - function choice menu back to the main prompt, so that the test - program stays synchronized. - (set_bp_overloaded): New proc to collect all the common - code for setting a breakpoint on an overloaded name. Calls - take_gdb_out_of_choice_menu when needed. - (menu_overload1arg): New variable to collect the repeated - instances of the expected menu for an overloaded name. Change - the regular expression to handle changes in g++ type encoding: - "void" can be either "void" or "", and "unsigned int" can be - either "unsigned int" or "unsigned". - (continue_to_bp_overloaded): Change regular expressions to handle - changes in g++ type encoding. - (no proc): Call take_gdb_out_of_choice_menu when needed. - Remove redundant calls to "info break". Accept either "canceled" - or "cancelled". Change regular expressions in "info break" - calls to handle changes in g++ type encoding. Give all tests - unique strings. - -2001-01-17 Ben Elliston <bje@redhat.com> - - * config/sid.exp: New file. - -Fri Jan 12 18:29:01 2001 Andrew Cagney <cagney@b1.cygnus.com> - - * gdb.base/callfuncs.exp: Add space after ``Value returned is''. - -2000-12-21 Michael Snyder <msnyder@cygnus.com> - - * gdb.base/finish.exp: Accept '1' instead of \001 from char_func. - Add a RE to accept a non-ascii char if one is ever presented. - -2000-12-20 Fernando Nasser <fnasser@redhat.com> - - * lib/mi-support.exp (mi_gdb_start): Test for MI_OUT, not UI_OUT. - -2000-12-18 Michael Snyder <msnyder@cygnus.com> - - * gdb.base/setvar.exp: Use double '\\' to quote curly braces - in regexp. One '\' does not suffice on Linux. - -2000-12-09 Michael Chastain <chastain@redhat.com> - - * gdb.base/break.exp (test_clear_command): Use a marker function - rather than 'main' for the test function. Also move this - test to an execution point where the marker function names are - guaranteed to be bound to functions. (Executing tests after a - 'finish' from main runs into name conflicts with local names - in __libc_start_main). - -2000-12-07 Michael Snyder <msnyder@cygnus.com> - - * gdb.base/finish.exp: New test for gdb's "finish" command. - * gdb.base/return2.exp: New test for gdb's "return" command. - * gdb.base/return2.c: New source file for above. - -2000-12-05 Michael Snyder <msnyder@cygnus.com> - - * gdb.base/constvars.exp: Add a "pass" message if "up" succeeds. - * gdb.base/miscexprs.exp: Ditto. - * gdb.base/pointers.exp: Ditto. - * gdb.c++/derivation.exp: Ditto. - * gdb.c++/local.exp: Ditto. - * gdb.c++/namespace.exp: Ditto. - * gdb.c++/overload.exp: Ditto. - * gdb.c++/ref-types.exp: Ditto. - -2000-12-05 Michael Snyder <msnyder@cygnus.com> - - * gdb.base/constvars.exp: Test result of "up" command. - * gdb.base/miscexprs.exp: Ditto. - * gdb.base/pointers.exp: Ditto. - * gdb.base/scope.exp: Ditto. - * gdb.c++/derivation.exp: Ditto. - * gdb.c++/local.exp: Ditto. - * gdb.c++/namespace.exp: Ditto. - * gdb.c++/overload.exp: Ditto. - * gdb.c++/ref-types.exp: Ditto. - -2000-11-22 Michael Chastain <chastain@redhat.com> - - * mips_pro.exp: Accept either "middle -> top -> main" or - "middle -> main" in the backtrace, because gcc can optimize - tail calls to jumps. Remove setup_xfail for the hppa case. - Add a comment with the original warning messages from PR 3016, - which was filed in 1993, to preserve them for posterity. - -2000-11-17 Nick Duffek <nsd@redhat.com> - - * lib/gdb.exp (gdb_test): Override timeout with board info. - -2000-11-17 Nick Duffek <nsd@redhat.com> - - * gdb.base/display.exp: Don't kill running stub. Add "again" to - the second kill and detach messages. - -2000-11-17 Nick Duffek <nsd@redhat.com> - - * configure.in: Add AC_EXEEXT. - * configure: Regenerate. - * Makefile.in (just-check): Export EXEEXT. - * lib/gdb.exp ($EXEEXT): Import from environment. - * gdb.base/maint.exp: Expect $EXEEXT in executable name. Don't - expect "maint dump-me" on Cygwin. - * gdb.base/reread.exp ($binfile, $binfile1, $binfile2): Append - $EXEEXT. - -2000-11-17 Nick Duffek <nsd@redhat.com> - - * gdb.base/break.exp: Test backtrace and finish from called - function on all platforms, not just HP-UX. - -2000-11-03 Michael Snyder <msnyder@cygnus.com> - - * config/monitor.exp (gdb_target_cmd): Abstracts some of the - code from gdb_target_monitor, so it can be used independantly - for gdbserver. Also comment out an unnecessary PUTS. - -2000-11-03 Michael Snyder <msnyder@cygnus.com> - - * gdb.base/a2-run.exp: Use gdb_skip_stdio_test. - * gdb.base/corefile.exp: Expect the message "Program is being - debugged already" when we send the "corefile" command, since - the preceeding gdb_load may have connected gdb to a remote target. - * gdb.base/display.exp: Disable hardware watchpoints if new - board info variable "no_hardware_watchpoints" is true. - Replace single-letter commands with more readable ones. - * gdb.base/recurse.exp (recurse_tests): Disable hardware watchpoints - if new board info variable "no_hardware_watchpoints" is true. - * gdb.base/restore.exp (restore_tests): Call gdb_skip_stdio_tests - to see if stdio (printf) testing is possible. - * gdb.base/watchpoint.exp: Disable hardware watchpoints if new - board info variable "no_hardware_watchpoints" is true. Use new - proc "gdb_skip_stdio_tests" to see if printf tests are possible. - -2000-11-13 Fernando Nasser <fnasser@redhat.com> - - From Orjan Friberg <orjanf@axis.com>: - * gdb.base/printcmds.exp: Escape curly braces followed by a number - in array print pattern match. - -2000-11-09 Fernando Nasser <fnasser@redhat.com> - - * gdb.c++/templates.exp (test_template_breakpoints): Change Britsh - spelling "cancelled" to U.S. spelling "canceled" to match changes - made to gdb. - * gdb.c++/ovldbreak.exp: Ditto. - -2000-11-06 Peter Schauer <pes@regent.e-technik.tu-muenchen.de> - - * gdb.base/callfuncs.c (main): Moved to end of file, call - t_double_values to initialize the FPU before inferior calls are made. - * gdb.base/callfuncs.exp: Test for register preservation after calling - inferior functions. Add tests for continuining, finishing and - returning from a stop in a call dummy. - -2000-10-24 Michael Snyder <msnyder@cygnus.com> - - * gdb.base/commands.exp: Break up long lines, and re-indent. - -2000-10-19 Michael Snyder <msnyder@cygnus.com> - - * config/gdbserver.exp: Rewritten from the ground up, to make it - compatible with the current dejagnu tree, and to make it work with - the new "gdbserver" in libremote. - -2000-10-16 Michael Snyder <msnyder@cygnus.com> - - * gdb.base/sizeof.exp (check_sizeof): Skip if no printf support. - * gdb.base/varargs.exp: Skip entire test if no printf support. - * gdb.base/ending-run.exp (Step to return): Skip if no printf supt. - * gdb.base/shlib-call.exp: Skip several tests if no printf support. - -2000-10-13 Michael Snyder <msnyder@cygnus.com> - - * lib/gdb.exp (gdb_skip_float_test): New proc. Skip test if - no floating point support. - (gdb_skip_stdio_test): New proc. Skip test if no stdio support. - * gdb.base/call-ar-st.exp: Use above procs to skip tests. - * gdb.base/call-rt-st.exp: Ditto. - * gdb.base/call-strs.exp: Ditto. - -2000-08-02 Jimmy Guo <guo@hpcleara.cup.hp.com> - - * gdb.base/sizeof.c: include <stdio.h>. - - * gdb.c++/classes.exp: Use gdb_test instead of send_gdb to - 'finish', otherwise uncaptured gdb_prompt would potentially - throw remaining test points out of sync. - -2000-07-26 Scott Bambrough <scottb@netwinder.org> - - * gdb.base/recurse.exp: Run tests for all targets. - * gdb.base/so-impl-ld.exp: Added wildcard to handle the - gnu-oldld case on ARM. - * gdb.base/watchpoint.exp (test_stepping): Clear xfail - for ARM targets. - -Mon Jul 24 07:46:02 CDT 2000 Clinton Popetz <cpopetz@cygnus.com> - - * gdb.java/configure.in (AC_INIT): Use jmisc.exp. - * gdb.java/configure: Rebuild. - -Sun Jul 23 21:42:34 2000 Anthony Green <green@redhat.com> - - * gdb.java/jv-exp.exp: New file. - -Sun Jul 23 21:02:42 2000 Anthony Green <green@redhat.com> - - * configure: Rebuilt. - * configure.in (configdirs): Add gdb.java. - * gdb.java/jmisc.java: New file. - * gdb.java/jmisc.exp: New file. - * gdb.java/Makefile.in: New file. - * gdb.java/configure: Rebuilt. - * gdb.java/configure.in: New file. - * lib/java.exp: New file. - -Wed Jul 12 18:14:29 2000 Andrew Cagney <cagney@b1.cygnus.com> - - * gdb.base/exprs.exp: Test casts to a pointer including over and - underflow. - -Thu Jul 13 11:52:53 2000 Andrew Cagney <cagney@b1.cygnus.com> - - * gdb.base/sizeof.exp, gdb.base/sizeof.c: New files. Compare GDB - and the compilers sizes. - -2000-07-09 Nick Duffek <nsd@redhat.com> - - * gdb.c++/misc.cc (class ClassParam, class_param): Define. - (use_methods): New function. - (main): Call use_methods(). - * gdb.c++/classes.exp (test_method_param_class): New procedure. - (do_tests): Call test_method_param_class. - -2000-07-09 Nick Duffek <nsd@redhat.com> - - * gdb.c++/classes.exp (test_nonexistant_members): Fix name - spelling. - (test_enums): New procedure. Move enum tests from end of script - to here. Set breakpoint on function name instead of line number. - * gdb.c++/misc.cc (ClassWithEnum): Move past Foo definitions. - (enums2): New marker function. - (enums1): New function. - (main): Call enums1(). Move enum tests to enums1(). - -Tue Jul 4 03:43:49 2000 Andrew Cagney <cagney@b1.cygnus.com> - - * gdb.asm/asm-source.exp: Use raw AS/LD instead of CC to - compile/link program. Update line numbers. - * gdb.asm/d10v.inc: Define ``startup''. - * gdb.asm/asmsrc1.s: Add definition of _start. - -Fri Jun 23 17:45:52 2000 Andrew Cagney <cagney@b1.cygnus.com> - - * gdb.base/call-ar-st.exp: More rewrites of multi-line patterns. - -2000-06-18 Elena Zannoni <ezannoni@kwikemart.cygnus.com> - - * gdb.base/maint.exp: Add 'maint print architecture' item to output - of 'help maint print' command. - -Fri Jun 16 18:22:05 2000 Andrew Cagney <cagney@b1.cygnus.com> - - * gdb.base/call-ar-st.exp: Rewrite all multi-line patterns so that - they use gdb_expect_list. - -Wed Jun 7 13:02:40 2000 Andrew Cagney <cagney@b1.cygnus.com> - - * gdb.base/commands.exp: Use ``set remote - memory-read-packet-size'' instead of ``set endian big'' to test - long commands. - -2000-06-03 Daniel Berlin <dan@cgsoftware.com> - - * gdb.c++/templates.exp (do_tests): Make all of these work under - g++, and stop skipping them. - - * gdb.c++/namespace.exp: Move from gdb.hp/gdb.aCC to here, make it - work under g++. - - * gdb.c++/misc.cc: Fix ambiguous initialization with correct - initialization. - -2000-06-02 Michael Snyder <msnyder@cygnus.com> - - * gdb.base/annota1.exp (run until main breakpoint): Loosen up - the regular expression: accept an (almost) arbitrary sequence of - "frames-invalid" and "breakpoints-invalid" messages both before - and after the "starting" message. - -2000-06-02 Michael Snyder <msnyder@cygnus.com> - - * gdb.c++/local.exp: This test has never been known to work with g++. - -2000-05-18 Michael Snyder <msnyder@cygnus.com> - - * gdb.base/annota1.exp (annotate-signal-handler-caller): - Relax the regular expression a little, make it pass on Solaris 8. - -2000-05-12 Kevin Buettner <kevinb@redhat.com> - - * gdb.base/step-test.exp: On IA-64 targets, when stepping out of - a call, do not require that gdb stop on the line after the call. - Instead, it is permissible for gdb to stop on the line of the - call itself. - -2000-05-12 Michael Snyder <msnyder@.cygnus.com> - - * gdb.base/break.exp (bp on small function, optimized file): - Add a second pass pattern. The behavior differs here between stabs - and dwarf for one-line functions. Stabs preserves two line symbols - (one before the prologue and one after) with the same line number, - but dwarf regards these as duplicates and discards one of them. - Therefore the address after the prologue (where the breakpoint is) - has no exactly matching line symbol, and GDB reports the breakpoint - as if it were in the middle of a line rather than at the beginning. - -2000-05-08 Michael Snyder <msnyder@cygnus.com> - - * gdb.base/interrupt.exp: Make "pass" message say "send" - rather than "send_gdb" (for consistancy). - -Mon May 1 15:37:58 2000 Andrew Cagney <cagney@b1.cygnus.com> - - From 2000-04-28 Andreas Jaeger <aj@suse.de>: - * gdb.c++/templates.cc: Properly check for GCC version number. - * lib/compiler.cc: Likewise - -2000-04-28 Michael Snyder <msnyder@cygnus.com> - - * gdb.base/break.exp: When compiled with -O2 optimization, - gdb may not stop at the first line of main, due to code motion. - -2000-04-26 Michael Snyder <msnyder@cygnus.com> - - * gdb.base/call-ar-st.exp: Bail out if target is sparclet. - This test depends on parsing the printf output from the target. - Since the sparclet stub doesn't do stdio, this will never work. - * gdb.base/call-rt-st.exp: ditto. - * gdb.base/call-strs: ditto. - -2000-04-24 Michael Snyder <msnyder@cygnus.com> - - * gdb.base/miscexprs.exp: make sizeof long array test portable. - - * gdb.base/ending-run.exp: After connecting to a remote target, - but before running, the target will appear to be in a random - location. Specify both a file and a line for breakpoints. - Also, the function that calls main may be called 'init' - rather than 'start'. - -2000-04-17 Elena Zannoni <ezannoni@kwikemart.cygnus.com> - - * gdb.base/help.exp: Update output for add-symbol-file command. - -2000-04-10 Fernando Nasser <fnasser@cygnus.com> - - From Franz Sirl <Franz.Sirl-kernel@lauterbach.com> - * gdb.base/structs2.c: Support platforms defaulting to a unsigned char. - -2000-04-07 J.T. Conklin <jtc@redback.com> - - * gdb.base/call-ar-st.exp: Relax patterns matching tab characters. - - * gdb.base/funcargs.exp: Relax patterns matching pointers to char. - -Thu Mar 30 13:26:19 2000 Philippe De Muyter <phdm@macqel.be> - - * gdb.base/call-ar-st.c (init_small_structs, main): Use floating-point - values that can be represented exactly. - * gdb.base/call-ar-st.exp (print print_small_structs): Fixed to match - above change, and to not check against the directory part of the source - file name. - (step into print_long_arg_list): Likewise. - (print print_small_structs from print_long_arg_list): Likewise. - (print print_long_arg_list): Likewise. - -2000-03-27 Elena Zannoni <ezannoni@kwikemart.cygnus.com> - - * gdb.base/printcmds.c: Terminate char array ctable2 with 0. - -Mon Mar 27 14:46:37 2000 Andrew Cagney <cagney@b1.cygnus.com> - - * ChangeLog, gdb.base/commands.exp: Revert whitespace changes. - -2000-03-25 Daniel Berlin <dan@cgsoftware.com> - - * gdb.base/commands.exp (deprecated_command_test): Add test for - deprecate with no arguments. - -2000-03-24 Jonathan Larmour <jlarmour@redhat.co.uk> - - * gdb.base/break.exp: Add new test for setting breakpoints on - optimized code so we can test breakpoints work even when function - prologues may be optimized away - -2000-03-23 Fernando Nasser <fnasser@totem.to.cygnus.com> - - From David Whedon <dwhedon@gordian.com> - * gdb.base/commands.exp : Added command deprecator tests. - -2000-03-22 Daniel Berlin <dan@cgsoftware.com> - - * gdb.base/help.exp: Added test for new apropos command. - -2000-03-21 Kevin Buettner <kevinb@redhat.com> - - * gdb.base/pointers.c (usevar): New function. - (main): Make sure that global variables v_int_pointer2, rptr, - and y are all referenced someplace in the program by calling - usevar() on them. [Some linkers delete symbols which are - never referenced. The space remains, but there's no way to - get a (symbolic) handle on the variable from the debugger.] - -2000-03-14 Elena Zannoni <ezannoni@kwikemart.cygnus.com> - - * gdb.base/printcmds.c: Add typedeffed arrays. - - * gdb.base/printcmds.exp (test_print_typedef_arrays): New - procedure to test arrays that are typedef'd. - -2000-03-13 James Ingham <jingham@leda.cygnus.com> - - * lib/gdb.exp: Fix the gdbtk_start routine to correctly find all - the library directories. - -Mon Feb 21 13:05:36 2000 Andrew Cagney <cagney@b1.cygnus.com> - - * configure.in (configdirs): Add sub directory gdb.mi. - * configure: Re-generate. - - * gdb.mi: New directory. - -2000-02-25 Scott Bambrough <scottb@netwinder.org> - - * gdb.base/long_long.exp: Correct test suite failure when printing - a long long value as a double on ARM platforms. - -2000-02-16 Jim Blandy <jimb@redhat.com> - - * gdb.base/break.exp ("breakpoint line number"): Make sure the - default source file is set properly before running this test. - -2000-02-14 Elena Zannoni <ezannoni@kwikemart.cygnus.com> - - * lib/gdb.exp: Tell the testsuite that now gdbtk is in the - gdbtk/library directory, not in gdbtcl2. - -2000-02-04 Jim Blandy <jimb@redhat.com> - - * gdb.c++/templates.exp: ("ptype T5<int>"): Remove extraneous - backslash from regexp pattern. - - * gdb.c++/ovldbreak.exp (continue_to_bp_overloaded): New - procedure. Use it to run all the "continue to bp overloaded" - tests. Note that this changes the names of the tests slightly. - If the breakpoint hit message includes a hex PC value, because - GCC's Dwarf 2 line info doesn't help us distinguish the prologue - from the real source code, still consider that a pass. - - * gdb.base/condbreak.exp ("run until breakpoint at marker2"): - XFAIL here if the breakpoint message contains a hex address. Note - similar change on 1999-11-02. - - * gdb.base/step-test.exp: Comment Fernando's change of 2000-02-02. - - * gdb.base/ptype.exp: Establish a default source file before - calling get_debug_format. - -2000-02-03 Fernando Nasser <fnasser@totem.to.cygnus.com> - - * gdb.base/watchpoint.exp: Remove duplication of test messages. - -2000-02-02 Fernando Nasser <fnasser@totem.to.cygnus.com> - - * gdb.base/step-test.exp: Fix the steps to enter a callee by means - of successive stepi commands -- while in the prologue we should see - the function entry bracket. - -2000-02-02 Fernando Nasser <fnasser@totem.to.cygnus.com> - - * gdb.base/ending-run.exp: Add ARM in thumb mode case, where we - reach __change_mode() when stepping through the end of main(). - -2000-01-17 Fernando Nasser <fnasser@totem.to.cygnus.com> - - * gdb.base/default.exp: Fix expected pattern. - * gdb.base/help.exp: Same. - -2000-01-10 Elena Zannoni <ezannoni@kwikemart.cygnus.com> - - * gdb.base/so-indr-cl.exp: Don't execute the test if not on HPUX. - Don't use xfail's because that affects only the following test. - - * gdb.base/so-impl-ld.exp: Don't execute the tests if not on hpux, - solaris or linux. - - * gdb.base/selftest.exp: Update to reflect changes to main.c. - -2000-01-07 Michael Snyder <msnyder@cygnus.com> - - * gdb.base/display.exp: Some yacc parsers like to say - "A syntax error" rather than "A parse error". Accept both. - -2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com> - - * gdb.base/default.exp: Remove OS dependent string from "target - remote" test. - * gdb.base/help.exp: Same for "help target remote" test. - -2000-01-04 Elena Zannoni <ezannoni@kwikemart.cygnus.com> - - From Jim Kingdon <kingdon@redhat.com>: - - * gdb.c++/annota2.exp: Fix "delete bps" test to wait for the - prompt (cleanup rather than necessity, but still might keep output - from spilling to next test). - -2000-01-02 Fred Fish <fnf@cygnus.com> - - * gdb.base/ptype.c (FALSE, TRUE): #undef these to avoid clash on - AIX, which defines them in <sys/types.h>. - -1999-12-16 Stan Shebs <shebs@andros.cygnus.com> - - * gdb.base/default.exp: Match arm* etc instead of arm in "info - float" test. - -1999-12-13 Fernando Nasser <fnasser@totem.to.cygnus.com> - - * gdb.base/watchpoint.exp: Add missing "(timeout)" to test message. - - * gdb.base/break.exp: Add missing anchor to reg exp on "finish from - outermost frame disallowed". - -1999-12-09 Fernando Nasser <fnasser@totem.to.cygnus.com> - - * gdb.base/setvar.exp: New tests for setting the value of a struct - with a constant list. - -1999-12-08 Fernando Nasser <fnasser@totem.to.cygnus.com> - - * gdb.base/setvar.exp: Remove pair os tests that expected gdb to - require the user to type a cast before setting the value of a struct. - -1999-12-06 Jim Blandy <jimb@cygnus.com> - - * gdb.base/default.exp: Expect the new 'info float' command on - all i386 platforms. - - * gdb.threads/linux-dp.exp: Expand our ability to recognize - LinuxThreads libraries that don't support debugging. - -Sat Dec 4 15:21:18 1999 Andrew Cagney <cagney@b1.cygnus.com> - - * gdb.base/remote.c: Fill the buffer with truely random data. - Change the buffer type to ``unsigned char'' to simplify size - arithmetic. - - * gdb.base/remote.exp: Reduce download numbers by one. Typical - stub only handles 400-1 byte packets. Verify that the download - worked. - -1999-11-30 Fernando Nasser <fnasser@totem.to.cygnus.com> - - * lib/gdb.exp (gdb_expect_list): FAIL only once on multiple pattern - tests, using UNRESOLVED for the untested cases. Also, does not wait - for a timeout if the prompt was received before a recognizable pattern. - -1999-11-29 Fernando Nasser <fnasser@totem.to.cygnus.com> - - * lib/gdb.exp (gdb_expect_list): Fix spelling. - -1999-11-29 Elena Zannoni <ezannoni@kwikemart.cygnus.com> - - * gdb.base/watchpoint.exp: Add tests cases for the hit count of - watchpoints. - -1999-11-24 Jason Merrill <jason@casey.cygnus.com> - - * gdb.base/condbreak.exp: Add missing '$gdb_prompt $'. - - * gdb.c++/local.exp: Be more flexible in recognizing local class - name mangling. Don't allow horribly truncated method names. - * gdb.c++/derivation.exp: Expect protected inheritance. - * gdb.c++/inherit.exp: Be more flexible in recognizing vbase pointers. - * gdb.c++/virtfunc.exp: Likewise. - * gdb.c++/classes.exp: Likewise. Don't require the enclosing scope - when printing a nested enum. - -1999-11-22 Jim Blandy <jimb@cygnus.com> - - * gdb.base/step-test.exp: Properly await GDB's response to setting - a breakpoint on the call to large_struct_by_value. - - * gdb.base/ending-run.exp ("step to end of run 1"): Don't fail - just because we have debug info for the `start' function. - -1999-11-19 Jim Blandy <jimb@zenia.red-bean.com> - - * gdb.threads/linux-dp.exp ("create philosopher"): Recognize the - "Unknown signal" messages, which indicate (on LinuxThreads) that - GDB doesn't know how to debug threads on this system. This is - better than hanging while philosopher 0 dumps chatter into gdb.log. - -1999-11-18 Tom Tromey <tromey@cygnus.com> - - * gdb.trace/deltrace.exp: Updated test to reflect new error text. - -1999-11-18 Fred Fish <fnf@cygnus.com> - - * gdb.base/coremaker2.c: Add sample program for generating - cores that is more self contained than coremaker.c. Eventually - I'll add more code to this and tie it into the testsuite. - -1999-11-12 Stan Shebs <shebs@andros.cygnus.com> - - * gdb.base/dollar.exp: Remove, now in gdb.hp. - -1999-11-10 Jimmy Guo <guo@cup.hp.com> - - * gdb.exp (get_compiler_info): pick up compiler.c and compiler.cc - from $srcdir/lib/. - * lib/compiler.c, lib/compiler.cc: New files, moved from gdb.base/ - and gdb.c++/. - - * gdb.c++/derivation.exp: remove redundant get compiler info code. - - * gdb.base/commands.exp: add '$gdb_prompt $' anchor to - 'continue with watch' test point. - -1999-11-08 Jim Blandy <jimb@zenia.red-bean.com> - - Merged from p2linux-990323-branch: - - * lib/gdb.exp (gdb_continue_to_breakpoint): New function. - -Mon Nov 8 23:07:09 1999 Andrew Cagney <cagney@amy.cygnus.com> - - * gdb.base/remote.exp: Test ``set remote memory-write-packet-sized - {limit,fixed}''. Test ``set download-write-size''. - -Sun Nov 7 17:37:01 1999 Andrew Cagney <cagney@b1.cygnus.com> - - * gdb.base/funcargs.exp: Rewrite stack traceback checks using - gdb_expect_list. - -Fri Nov 5 18:40:52 1999 Andrew Cagney <cagney@b1.cygnus.com> - - * lib/gdb.exp (gdb_expect_list): Return a success/fail indication. - -1999-11-03 Mark Salter <msalter@cygnus.com> - - * gdb.base/break.exp: Fix "stub continue" pattern. - -1999-11-03 Jim Blandy <jimb@zwingli.cygnus.com> - - * gdb.base/shlib-call.exp ("next to shr1"): Fix test name. - -1999-11-02 Jim Blandy <jimb@zwingli.cygnus.com> - - * gdb.base/display.exp ("finish"): Add timeout clause. - - * gdb.base/condbreak.exp ("run until breakpoint at marker1"): Add - plain prompt clause, so this doesn't have to time out in order to - fail. - - * gdb.base/condbreak.exp, gdb.base/ena-dis-br.exp: XFAIL if the - breakpoint hit messages include an address. - - * gdb.base/display.exp: Don't forget to escape parens in regular - expressions. Unix regexp notatation sucks. - -1999-11-02 Elena Zannoni <ezannoni@kwikemart.cygnus.com> - - * gdb.base/annota1.exp: Test for annotate-signalled: change output - order for 'signalled' message. - -1999-11-01 Stan Shebs <shebs@andros.cygnus.com> - - From Jimmy Guo <guo@cup.hp.com>: - * gdb.base/annota1.exp: Add tests for annotate ignore count change. - * gdb.base/annota1.c: Add code for tests to work with. - -1999-10-26 Frank Ch. Eigler <fche@cygnus.com> - - * gdb.base/remote.exp: New test for remote downloading settings. - * gdb.base/remote.c: New file with large .data. - -1999-10-18 Jim Blandy <jimb@zwingli.cygnus.com> - - * gdb.threads/linux-dp.c, gdb.threads/linux-dp.exp: New test suite - for LinuxThreads support, merged from the Code Fusion branch. - -Mon Oct 11 13:57:21 1999 Andrew Cagney <cagney@amy.cygnus.com> - - * lib/gdb.exp (gdb_run_cmd): Break complicated gdb_expect - containing exp_continue into a while within an expect. Don't - attempt a start more than three times. Check return value from - gdb_load. - -Wed Oct 6 12:05:58 1999 Andrew Cagney <cagney@b1.cygnus.com> - - * gdb.base/watchpoint.exp: Match fail ``finish from marker1'' with - a pass case. - -1999-10-01 Kevin Buettner <kevinb@cygnus.com> - - * gdb.base/break.c (main): Added a statement that we can step - off of. - * gdb.base/break.exp: Added tests for setting a breakpoint - at an offset and stepping onto a breakpoint. - -1999-10-01 Fred Fish <fnf@cygnus.com> - - * gdb.base/help.exp (help add-symbol-file): Update to match current - gdb output. - -1999-09-18 Jim Blandy <jimb@cris.red-bean.com> - - * gdb.base/break.exp: Code locations are in hex, don't forget! - (For HP-UX.) - -1999-09-17 Stan Shebs <shebs@andros.cygnus.com> - - * condbreak.exp: Use break.c as test program. - * condbreak.c: Remove, redundant with break.c. - -1999-09-15 Stan Shebs <shebs@andros.cygnus.com> - - * config/monitor.exp (gdb_target_monitor): Disable X- and - Z-packets if the target needs it. - -1999-09-13 James Ingham <jingham@leda.cygnus.com> - - * gdb.c++/overload.exp: Added tests for listing overloaded - functions with function pointers in the arg, explicitly calling - out the version you want. - -1999-09-09 Stan Shebs <shebs@andros.cygnus.com> - - * long_long.exp: Add variations of test cases that work for - targets with 16-bit ints and 32-bit doubles. - -1999-09-08 Stan Shebs <shebs@andros.cygnus.com> - - * break.c (main): Compare a possibly-uninitialized argc with an - unlikely value that fits in 16 bits. - -1999-09-07 Stan Shebs <shebs@andros.cygnus.com> - - * gdb.base/restore.c, gdb.base/restore.exp: Use 0x7eeb instead of - 0xfeeb, don't want negative numbers if ints are 16 bits. - - * lib/gdb.exp (skip_cplus_tests): New proc. - * gdb.c++/ambiguous.exp, gdb.c++/annota2.exp, - gdb.c++/anon-union.exp, gdb.c++/classes.exp, - gdb.c++/cplusfuncs.exp, gdb.c++/ctti.exp, gdb.c++/demangle.exp, - gdb.c++/derivation.exp, gdb.c++/inherit.exp, gdb.c++/local.exp, - gdb.c++/member-ptr.exp, gdb.c++/method.exp, gdb.c++/misc.exp, - gdb.c++/overload.exp, gdb.c++/ovldbreak.exp, - gdb.c++/ref-types.exp, gdb.c++/templates.exp, gdb.c++/userdef.exp, - gdb.c++/virtfunc.exp: Use it to skip over C++ tests. - - * gdb.c++/cplusfuncs.exp: Use get_compiler_info consistently. - -Fri Sep 3 15:37:12 1999 Kevin Buettner <kevinb@cygnus.com> - - * gdb.base/corefile.exp (up): Allow a parameter to appear - in the frame that we're going up to. - - From Jim Blandy <jimb@cygnus.com>: - - * gdb.base/default.exp (info float): Expect some output now. - - * gdb.base/callfuncs.exp (do_function_calls): We no longer expect - returning floating-point values to fail on the x86. - * gdb.base/callfwmall.exp (do_function_calls): Same. - - * gdb.base/list.exp (test_listsize): Correct expectations for - listing line 1 with listsize 2. Also, listing a single line - works now, as does listing three lines. [Kevin's note: There - were a number of other cases fixed too where the expectations - differed...] - -1999-09-02 Stan Shebs <shebs@andros.cygnus.com> - - * gdb.base/selftest.exp: Add case for when version prints as - constant string instead of char pointer. - -1999-08-25 Stan Shebs <shebs@andros.cygnus.com> - - * gdb.base/ending-run.exp: Add Solaris case for what happens when - stepping out of main. - - * gdb.c++/derivation.exp: XFAIL inf fn calls for all configs, if - G++ used. - - * gdb.c++/local.exp: Expect ptype NestedInnerLocal to succeed - always, expect ptype InnerLocal::NestedInnerLocal to fail always. - - * gdb.c++/ovldbreak.exp: Update match string in test that - includes a warning of multiple breakpoints. - -1999-08-24 Stan Shebs <shebs@andros.cygnus.com> - - * gdb.base/display.exp: Improve precision of step-after-finish - added yesterday. - - * gdb.base/signals.exp: Add extra wildcard to "handle all print" - test. - - * gdb.c++/classes.exp: XFAIL HP-compiler-only tests for all - configs when using G++, not just hppa*. - -1999-08-24 Elena Zannoni <ezannoni@kwikemart.cygnus.com> - - * gdb.base/async.c: New file. - * gdb.base/async.exp: New file. - -Tue Aug 24 03:24:53 1999 Jeffrey A Law (law@cygnus.com) - - * gdb.base/break.exp: Tweak PA specific tests to properly handle - PA64. - -Mon Aug 23 10:25:20 1999 Jeffrey A Law (law@cygnus.com) - - * gdb.base/display.exp: "finish" can leave us mid-line on many - targets, deal with it. Add a small constant to main, instead of - 1000 since main+1000 may not be a valid address in the target. - - * gdb.base/dollar.exp: Do not run for PA processors in wide mode - on hpux11. - - * gdb.base/attach.exp: Handle another hpux11 error message variant - when attaching to a process that does not exist. - -1999-08-19 J.T. Conklin <jtc@redback.com> - - * gdb.base/call-ar-exp.exp: Fix pattern matching whitespace - characters in 'continue to 1241' test. - -1999-08-17 Stan Shebs <shebs@andros.cygnus.com> - - * gdb.base/call-ar-st.exp: Add a shorter match case for the - stop in print_long_arg_list, define and use a whitespace - variable in print_small_structs test, add an XFAIL for Solaris. - * gdb.base/dbx.exp: XFAIL func commands until somebody is - interested enough to fix. - -1999-08-13 Keith Seitz <keiths@cygnus.com> - - * gdb.base/dbx.exp (dbx_gdb_file_cmd): Rename to gdb_file_cmd. - (dbx_gdb_load): Remove. Use gdb_load instead, since that - proc knows about targets other than the natives. - (test_assign): Use "gdb_run_cmd" to "run" the target. - Check that we've actually hit the breakpoint at main. - When we attempt to assign a value to a local variable, check - that the variable is in the current scope, i.e., don't use - a test with an empty result. - -Tue Aug 10 15:25:16 1999 Andrew Cagney <cagney@b1.cygnus.com> - - * gdb.base/maint.exp: Add test of ``maintenance internal-error'' - command. - -1999-08-09 Stan Shebs <shebs@andros.cygnus.com> - - From Jimmy Guo <guo@cup.hp.com> and others at HP: - gdb.hp: Move tests into subdirectories gdb.aCC, gdb.base-hp, - gdb.compat, gdb.threads-hp. - gdb.hp/configure, gdb.hp/configure.in: New files. - gdb.hp/Makefile.in: Recurse into new subdirs. - gdb.hp/gdb.defects: New directory, tests for HP bug reports. - gdb.hp/gdb.objdbg: New directory, tests for debugging info - in object files. - gdb.hp/tools: New directory, aux tools for HP-specific tests. - -1999-08-05 Stan Shebs <shebs@andros.cygnus.com> - - * gdb.base/display.exp: Help expect by putting a newline in the - funky printf, remove a bogus p/a test. - -1999-08-05 Elena Zannoni <ezannoni@kwikemart.cygnus.com> - - * gdb.base/display.exp: Make sure that when we say 'run', we are - connected to the target. This is necessary when running not - natively. - -1999-08-03 Stan Shebs <shebs@andros.cygnus.com> - - * gdb.base/step-test.exp: Removed some extraneous messages. - - * gdb.base/long_long.exp: Don't run memory examination tests - on little-endian targets (they will need a different set of - results to match). - -1999-08-02 Stan Shebs <shebs@andros.cygnus.com> - - * gdb.c++/virtfunc.exp: Expect to fail the virtual call tests - until somebody decides to fix GDB. - - * gdb.base/long_long.c: Stop compiler complaint by specifying long - constant as "ULL". - * gdb.base/long_long.exp: Loosen x/c test, add partial result - matches for a couple x/2 commands. - -1999-07-30 Stan Shebs <shebs@andros.cygnus.com> - - * gdb.c++/ref-types.cc, gdb.c++/ref-types.exp: Appease doschk - by merging in ref-types2 tests. - * gdb.c++/ref-types2.cc, gdb.c++/ref-types2.exp: Remove. - - From Jimmy Guo <guo@cup.hp.com> and others at HP: - * gdb.c++/Makefile.in: Add standard actions. - (EXECUTABLES): Rename from PROGS, update list. - * gdb.c++/ambiguous.cc, gdb.c++/ambiguous.exp: Move to here - from gdb.hp. - * gdb.c++/anon-union.cc: Don't use anonymous struct, make - foo and bar locals. - * gdb.c++/anon-union.exp: Fix tests to match. - * gdb.c++/classes.exp: Run if HP compiler used, add extra - expect matches to handle output variations. - * gdb.c++/cplusfuncs.cc: Make operator -> return foo *. - * gdb.c++/cplusfuncs.exp: Update to match, allow word "class" in - output, add HP alternatives for new and delete prints. - * gdb.c++/ctti.exp, gdb.c++/cttiadd.cc, gdb.c++/cttiadd1.cc, - gdb.c++/cttiadd2.cc, gdb.c++/cttiadd3.cc: Move here from gdb.hp. - * gdb.c++/demangle.exp: Use $style when reporting failure. - * gdb.c++/derivation.exp: Add some xfails if GCC-compiled. - * gdb.c++/inherit.exp: Run if HP compiler used, add some - match alternatives. - * gdb.c++/local.exp: Add match alternatives or xfails for HP - compilers. - * gdb.c++/member-ptr.exp: Add xfails for hppa*-*-*. - * gdb.c++/method.exp: Add match alternatives. - * gdb.c++/misc.cc: Add bool types. - * gdb.c++/misc.exp: Add tests for bool types. - * gdb.c++/overload.exp: Add xfails. - * gdb.c++/templates.cc: Remove bogus arglist init, init fvpchar. - * gdb.c++/templates.exp: Run if HP compiler used, add some xfails, - add some more template parameter tests (only for HP currently). - * gdb.c++/userdef.exp: Add xfails for hppa*-*-*. - * gdb.c++/virtfunc.cc: Add return type and value for main. - * gdb.c++/virtfunc.exp: Run if HP compiler used, add some - match alternatives. - -1999-07-30 Elena Zannoni <ezannoni@kwikemart.cygnus.com> - - * gdb.base/display.exp: Fix output of 'p/a &&j' test. - -1999-07-29 Jim Blandy <jimb@savonarola.red-bean.com> - - * gdb.base/signals.exp: Don't expect getting a backtrace from - within a signal handler to fail on Linux. - -1999-07-29 Stan Shebs <shebs@andros.cygnus.com> - - From Jimmy Guo <guo@cup.hp.com> and others at HP: - * lib/gdb.exp: Remove some gratuitious semicolons. - (delete_breakpoints): Increase timeout. - (gdb_expect): Add -notransfer option. - (gdb_test): Use -notransfer option. - (get_compiler_info): Add f77 case. - (get_compiler): New proc, split out from gdb_preprocess, add f77 - case. - (gdb_preprocess): Call get_compiler. - - * gdb.base/Makefile.in (EXECUTABLES): Update the list. - * gdb.base/attach.exp, gdb.base/display.exp, - gdb.base/ending-run.exp, gdb.base/gdbvars.exp, - gdb.base/long_long.exp, gdb.base/printcmds.exp, - gdb.base/structs.exp, gdb.base/structs2.exp: Remove or fill in - third arg to gdb_test. - * gdb.base/call-ar-st.exp: Add HP-UX xfail for >10-arg functions. - * gdb.base/callfuncs.exp, gdb.base/callfwmall.exp: Remove some - HP-UX xfails, add others. - * gdb.base/completion.exp: Reflect name change of self-test. - * gdb.base/condbreak.exp, gdb.base/corefile.exp, - gdb.base/foll-exec.exp, gdb.base/interrupt.exp, - gdb.base/ptype.exp, gdb.base/scope.exp, gdb.base/setvar.exp: Note - HP failure number. - * gdb.base/foll-vfork.exp: Loosen matches slightly, remove - useless HP-UX 10.30 references. - * gdb.base/maint.exp: Loosen matches. - * gdb.base/pointers.c (main): Declare more_code. - * gdb.base/pointers.exp: Match on output of a `next'. - * gdb.base/structs.c: Add prototypes. - * gdb.base/watchpoint.exp: Remove HP-UX 10.30 reference. - * gdb.base/whatis.exp: Fail for both HP-UX 10.20 and 11. - -1999-07-29 Elena Zannoni <ezannoni@kwikemart.cygnus.com> - - * gdb.base/list.exp: Add tests for repeating 'list <linenum>' - command. - -1999-07-27 Elena Zannoni <ezannoni@kwikemart.cygnus.com> - - * gdb.c++/annota2.exp: Fix delete breakpoint query testcase. - Fix run to main failures. Watchpoint can be hardware watchpoint. - - * gdb.base/annota1.exp: Clean up some more, in case printf has - debug info. Deal with lack of signal hanlder info in stack. - - From Jim Kingdon <kingdon@redhat.com>: - * gdb.base/annota1.exp: If printf has debug info, deal with it. - -1999-07-19 Stan Shebs <shebs@andros.cygnus.com> - - * gdb.base/foll-exec.exp, gdb.base/foll-fork.exp, - gdb.base/foll-vfork.exp: Don't run for crosses. - -Tue Jul 13 23:37:18 1999 Andrew Cagney <cagney@b1.cygnus.com> - - * gdb.base/configure.in: Check for gdbvars.exp instead of - a1-selftest.exp. - * gdb.base/configure: Re-generate. - -1999-07-12 Stan Shebs <shebs@andros.cygnus.com> - - * gdb.base/selftest.exp: Rename from a1-selftest.exp, no point - in trying to run first and name is too long. - - * gdb.base/pointers.c, gdb.base/pointers.exp: Add contents of - pointers2.c and pointers2.exp, respectively. - * gdb.base/pointers2.c, gdb.base/pointers2.exp: Remove, makes - doschk happier. - -1999-07-08 Stan Shebs <shebs@andros.cygnus.com> - - * gdb.base/callfwmall.c, gdb.base/callfwmall.exp: Renamed from - callfuncs2.c and callfuncs2.exp. - - * gdb.base/list.exp: Remove mistaken xfails. - * gdb.base/list0.h: Add optional prototypes. - -Wed Jul 7 00:27:35 1999 Andrew Cagney <cagney@amy.cygnus.com> - - * gdb.base/setvar.exp: Increase the time-out on tests indirectly - calling malloc. - * nodebug.exp, printcmds.exp, ptype.exp, setvar.exp: Ditto. - * ptype.exp: Move test for get_debug_format to before its first - use. - -1999-07-06 Elena Zannoni <ezannoni@kwikemart.cygnus.com> - - * gdb.base/Makefile.in (EXECUTABLES): Remove annota2 executable. - * gdb.base/annota2.cc, annota2.exp: Move from here. - * gdb.c++/annota2.cc, annota2.exp: To here. - * gdb.c++/Makefile.in (PROGS): Add annota2 executable. - -Tue Jun 29 11:56:06 1999 Andrew Cagney <cagney@b1.cygnus.com> - - * lib/gdb.exp (gdb_expect_list): Output one message per pattern in - a consistent format. - -1999-06-25 Stan Shebs <shebs@andros.cygnus.com> - - From Jimmy Guo <guo@cup.hp.com> and others at HP: - * lib/gdb.exp (get_compiler_info): Add detection for assorted - HP compilers, also set the globals $true and $false. - - * gdb.base/annota1.c, bitfields.c, break.c, call-ar-st.c, - call-rt-st.c, call-strs.c, callfuncs.c, callfuncs2.c, condbreak.c, - coremaker.c, ending-run.c, exprs.c, funcargs.c, interrupt.c, - jump.c, langs0.c, langs1.c, langs2.c, list0.c, list1.c, - long_long.c, mips_pro.c, nodebug.c, opaque0.c, opaque1.c, - printcmds.c, ptype.c, recurse.c, restore.c, return.c, run.c, - scope0.c, scope1.c, setshow.c, setvar.c, shmain.c, shr1.c, shr2.c, - sigall.c, signals.c, so-impl-ld.c, so-indr-cl.c, solib.c, - solib1.c, solib2.c, step-test.c, twice.c, varargs.c, watchpoint.c, - whatis.c} Add C++ compatible function definitions and return - types, add includes for library functions. - * gdb.base/ptype.c (my_false, my_true): Use instead of false/true. - * gdb.base/step-test.c (myglob): Rename from glob. - * gdb.base/attach.c, attach2.c, average.c, execd-prog.c, - foll-exec.c, foll-fork.c, foll-vfork.c, sum.c, vforked-prog.c: New - files, move here from gdb.hp. - * gdb.base/annota1.exp, break.exp, call-ar-st.exp, call-rt-st.exp, - commands.exp, condbreak.exp, define.exp, ena-dis-br.exp, - ending-run.exp, jump.exp. list.exp, long_long.exp, so-impl-ld.exp: - Adjust line numbers in regexps. - - * gdb.base/all-bin.exp, eval-skip.exp, exprs.exp, logical.exp, - miscexprs.exp, pointers.exp, relational.exp: Use $true and $false - instead of 0/1. - - * gdb.base/attach.exp, dbx.exp, foll-exec.exp, foll-fork.exp, - foll-vfork.exp: New files, move here from gdb.hp. - * gdb.base/page.exp: New file, test of pagination command. - - * gdb.base/watchpoint.c (recurser): New function, for watchpoint - recursion test. - * gdb.base/watchpoint.exp: Add more test cases for watchpoints. - - * gdb.base/so-impl-ld.exp, gdb.base/so-indr-cl.exp, - gdb.base/solib.exp: Fix compiler invocation process. - - * gdb.base/callfuncs.exp, gdb.base/callfuncs2.exp: Don't xfail for - HP-UX 11, turn off overload resolution explicitly. - * gdb.base/commands.exp: Set argument list explicitly, add - watchpoint test. - * gdb.base/completion.exp: Enable if HP-UX, tweak tests to make - them work. - * gdb.base/constvars.exp, gdb.base/volatile.exp: Escape the - expressions properly. - * gdb.base/corefile.exp: Loosen the match slightly. - * gdb.base/default.exp: Allow "Error accessing memory" message - also. - * gdb.base/display.exp: Skip over x/0 j if PA64. - * gdb.base/funcargs.exp: Add xfails for HP-UX. - * gdb.base/interrupt.exp: Ditto. - * gdb.base/langs.exp: Add symbolic matches governed by compiler - in use. - * gdb.base/list.exp: Add xfails for HP-UX. - * gdb.base/long_long.exp: Refine some of the numeric matches. - * gdb.base/mips_pro.exp: Xfail on HP-UX. - * gdb.base/miscexprs.exp: Add PA2.0 case for array size test. - * gdb.base/nodebug.exp: Succeed on more varieties of output. - * gdb.base/opaque.exp: Remove some HP-UX xfails. - * gdb.base/ptype.exp: Succeed on more varieties of output. - * gdb.base/scope.exp: Add xfails for HP-UX. - * gdb.base/sect-cmd.exp: Add more cases. - * gdb.base/setvar.exp: Add xfails for HP-UX. - * gdb.base/shlib-call.exp: Loosen some matches slightly. - * gdb.base/signals.exp: Match on void symbolically. - * gdb.base/step-test.exp: Add case for PA64. - * gdb.base/term.exp: Add exit and restart. - * gdb.base/twice.exp: Clean up after self. - * gdb.base/varargs.exp: Disable overload resolution explicitly. - * gdb.base/whatis.exp: Allow more ways to pass tests. - - * gdb.base/smoke.exp, gdb.base/smoke.c, gdb.base/smoke.cc: Remove, - no longer useful. - -Fri Jun 25 19:27:28 1999 Andrew Cagney <cagney@b1.cygnus.com> - - * lib/gdb.exp (proc gdb_expect_list): New procedure. Matches a - list of patterns. - * gdb.base/call-ar-st.exp: Use gdb_expect_list in "print - print_double_array(double_array)", "continuing to breakpoint - 1018", "print print_double_array(array_d)" and "continuing to - 1034" tests. - -1999-06-24 Jason Molenda (jsm@bugshack.cygnus.com) - - * Makefile.in: Add empty html and install-html targets. - -1999-06-24 Stan Shebs <shebs@andros.cygnus.com> - - * config/mt-*: Remove, these haven't been used since 1996. - -1999-06-22 Stan Shebs <shebs@andros.cygnus.com> - - * gdb.base/call-strs.c, gdb.base/ending-run.c, - gdb.base/step-test.c: Include stdlib.h and string.h as needed. - * gdb.c++/member-ptr.exp: Skip over these tests if using G++. - -1999-06-18 Stan Shebs <shebs@andros.cygnus.com> - - * gdb.c++/overload.exp: XFAIL everything if using G++, add a - simpler match case for the ptype of the big class. - -1999-06-16 Fernando Nasser <fnasser@totem.to.cygnus.com> - - * gdb.exp: Fix test for gdb_prompt existence. - -1999-06-16 Fernando Nasser <fnasser@totem.to.cygnus.com> - - * gdb.exp (gdb_test): Add fail after calls to perror. - -1999-06-16 Fernando Nasser <fnasser@totem.to.cygnus.com> - - * gdb.exp (gdb_test): Accept variations of Undefined command messages. - -1999-06-16 Fernando Nasser <fnasser@totem.to.cygnus.com> - - * gdb.exp (gdb_test): Fix anchors on gdb_expect statement. - -Fri Jun 11 12:56:50 1999 Andrew Cagney <cagney@b1.cygnus.com> - - * gdb.base/call-strs.c (link_malloc): New function. Ensure that - malloc() is linked in. - -1999-06-08 Fernando Nasser <fnasser@totem.to.cygnus.com> - - * gdb.base/ending-run.exp: Make sure we fail and do not timeout at - step at end. - - * gdb.base/annota1.exp: Increase match_max to prevent timeout. - -1999-06-08 Jim Blandy <jimb@zwingli.cygnus.com> - - * gdb.java/jv-print.exp: New file. (Our first Java test!) - -Fri Jun 4 10:47:46 1999 Jeffrey A Law (law@cygnus.com) - - * gdb.base/a1-selftest.exp: Remove bogus hppa xfail. - * gdb.base/mips_pro.exp: Likewise. - -1999-06-02 Keith Seitz <keiths@cygnus.com> - - * gdb.c++/templates.cc: Change all "new" operators to throw - an exception. - * gdb.c++/cplusfuncs.cc: Likewise. - - * gdb.base/Makefile.in (EXECUTABLES): Add smoke1, annota1, and annota2. - -Wed Jun 2 17:37:05 1999 Andrew Cagney <cagney@b1.cygnus.com> - - * gdb.base/condbreak.exp: Use rerun_to_main to start the program. - * gdb.base/ending-run.exp: When stepping out of main, accept a - step into an arbitrary assembler file. - -1999-05-20 Elena Zannoni <ezannoni@kwikemart.cygnus.com> - - * gdb.base/annota1.exp: Allow any number of "frames-invalid" and - "breakpoint-invalid" to be printed. - * gdb.base/annota2.exp: Revise line number for main breakpoint. Allow any - number of "frames-invalid" and "breakpoint-invalid" to be printed. - * gdb.base/annota2.cc: Initialize a.x to 0. - -1999-05-17 Keith Seitz <keiths@cygnus.com> - - * gdb.base/call-ar-st.exp: Skip "print print_double_array (double_array)" - when "skip_float_tests" set. - Ditto for "print print_double_array(array_d)", "print print_small_structs", - "print print_ten_doubles", and "step into print_long_arg_list". - Don't assume we can step into "print_long_arg_list": we could step into memcpy. - * gdb.base/call-rt-st.exp: Don't run float-related tests when "skip_float_tests" - is set: "print print_one_double(*d1)" and "print print_two_floats(*f3)". - * gdb.base/funcargs.exp: Don't run "float_and_integral_args" when - "skip_float_tests" is set. - * gdb.base/varargs.exp: Skip "print find_max_double(5,1.0,17.0,2.0,3.0,4.0)" - when "skip_float_tests" set. - -1999-05-06 Keith Seitz <keiths@cygnus.com> - - * gdb.base/annota2.cc: Include stdio.h. - -Wed May 5 17:44:31 1999 Stan Shebs <shebs@andros.cygnus.com> - - * gdb.base/crossload.exp: Remove, this has been disabled ever - since BFD stopped including all targets, and cross-GDB gets - plenty of testing anyway. - * gdb.base/i486-elf.u, gdb.base/m68k-aout.u, gdb.base/m68k-elf.u, - gdb.base/sparc-aout.u, gdb.base/i860-elf.u, gdb.base/m68k-aout2.u, - gdb.base/mips-ecoff.u, gdb.base/sparc-elf.u: Remove. - * gdb.base/README: Remove, was doc for this. - * gdb.base/Makefile.in (CROSS_EXECUTABLES): Remove, no longer - needed. - -1999-05-04 Elena Zannoni <ezannoni@kwikemart.cygnus.com> - - * gdb.base/call-ar-st.exp: Fix one regular expression in test - output. - - * gdb.base/annota1.exp: New file. Annotation level 2 tests. - * gdb.base/annota2.exp: New file. More annotation tests. - * gdb.base/annota1.c: New file. Source file for annota1.exp. - * gdb.base/annota2.cc: New file. Source file for annota2.exp. - -1999-04-23 Angela Marie Thomas <angela@cygnus.com> - - * config/cfdbug.exp: New file. - -1999-04-20 Jim Blandy <jimb@zwingli.cygnus.com> - - * gdb.c++/demangle.exp (test_gnu_style_demangling): Add tests for - Marcus Daniel's and Dale Hawkins's demangler crashes. - - * gdb.c++/demangle.exp (test_gnu_style_demangling, - test_lucid_style_demangling, test_arm_style_demangling, - test_hp_style_demangling): Try Tom Tromey's core-dumping - identifier under each demangling style. - -1999-04-07 Jim Blandy <jimb@zwingli.cygnus.com> - - * gdb.c++/demangle.exp: Include the current demangling style - in all test names. - (current_demangling_style): New global variable. - (set_demangling_style, test_demangling_core, test_demangling, - test_demangling_exact): New functions. - (test_gnu_style_demangling, test_lucid_style_demangling, - test_arm_style_demangling, test_hp_style_demangling): Use those, - instead of calling gdb_test and gdb_test_exact directly. - (catch_demangling_errors): New function, which reports errors - signalled by the demangling test functions in an orderly way. - (do_tests): Use catch_demangling_errors. - -1999-04-06 Jim Blandy <jimb@zwingli.cygnus.com> - - * gdb.base/signals.exp (test_handle_all_print): Use () for - grouping in expressions, not {}. - - * gdb.base/smoke.exp: Test value of x, not y. The latter isn't - initialized yet. - -1999-04-01 Stan Shebs <shebs@andros.cygnus.com> - - * gdb.c++/derivation.exp: Pass ptype tests if synthesized methods - are listed. - -1999-03-26 Stan Shebs <shebs@andros.cygnus.com> - - * gdb.stabs/weird.exp: Test for CC being defined before - looking at its value. - -1999-03-25 Stan Shebs <shebs@andros.cygnus.com> - - * gdb.base/call-ar-st.exp: Remove stray '#'. - * gdb.base/miscexprs.exp: Allow "short" and "long" as well as - "short int" and "long int". - * gdb.c++/overload.cc: Cast the string added in the previous - change, to mollify finicky HP compiler. - * gdb.hp/reg-test.exp (testfile): Fix file name. - * gdb.stabs/weird.exp: Don't try to run if HP compiler in use. - - * gdb.c++/misc.cc (main): Initialize obj_with_enum. - * gdb.c++/classes.exp: Fix test of obj_with_enum values, allow - alternate form of enum ptype. - -1999-03-23 Stan Shebs <shebs@andros.cygnus.com> - - * lib/gdb.exp (skip_hp_tests): Remove gcc_used argument. - * gdb.hp/*.exp: Change all to run compiler probe only after - passing skip_hp_tests, so as not to waste time on guaranteed - failure. - - * gdb.c++/overload.cc: Pass string instead of char addr, always - init ccpfoo. - * gdb.c++/templates.cc: Fix syntax error. - -Tue Mar 23 14:56:36 1999 Elena Zannoni <ezannoni@kwikemart.cygnus.com> - - * gdb.base/commands.exp: Add test for correct position of '>' - when issuing the 'commands' command after a 'while' or 'if' - command. - -1999-03-18 James Ingham <jingham@cygnus.com> - - * gdb.c++/ovldbreak.exp: Use gdb_continue_to_end - - * gdb.c++/method.exp: It was testing an uninitialized int on the - stack and assuming it was positive. - - * gdb.base/watchpoint.exp: Use gdb_continue_to_end. - - * gdb.base/step-test.exp: Catch a case where finish is broken and - keep it from killing the rest of the tests. - Use gdb_continue_to_end. - - * gdb.base/sigall.exp: use gdb_continue_to_end. - - * gdb.base/ena-dis-br.exp: use gdb_continue_to_end. - - * gdb.base/display.exp: use runto_main, not run. - - * gdb.base/default.exp: Check for the current error message in the - r abbreviation test. - Add strongarm to the targets that know info float. - - * gdb.base/condbreak.exp: Use the gdb_run command rather than just - run which doesn't work with monitors. - - * gdb.base/call-ar-st.exp: fixed bogus regexp in continuing to 1034 test. - - * gdb.base/break.exp: use the gdb_continue_to_end proc. - - * lib/gdb.exp: I had added gdb_continue_to_end used to run to the end of a - program. Traps the case (in Cygmon) when the program never really - exits. Same as Mark's continue_to_exit, but I had put it in a lot - more places, so I used my name. Sorry Mark... - - * config/monitor.exp (gdb_target_monitor): added another - target_info parameter: remotebinarydownload. This will set the - remotebinarydownload flag if this is causing some boards trouble. - -1999-03-18 Mark Salter <msalter@cygnus.com> - - * lib/gdb.exp (continue_to_exit): New function. - - * gdb.base/ena-dis-br.exp: Clean up for remote targets. - * gdb.base/ending-run.exp: Ditto. - * gdb.base/step-test.exp: Ditto. - -1999-03-16 Stan Shebs <shebs@andros.cygnus.com> - - * gdb.base/miscexprs.c: Clean up file, clear cbig.c[0] explicitly - (suggested by Art Haas <ahaas@neosoft.com>). - -1999-03-16 Jim Blandy <jimb@zwingli.cygnus.com> - - * gdb.base/signals.exp: Filter out *-*-linux* before matching *-*-gnu*. - -Fri Mar 12 18:06:21 1999 Stan Shebs <shebs@andros.cygnus.com> - - * gdb.c++/ref-types.exp, ref-types2.exp: Allow alternate - descriptions of types (short unsigned int vs unsigned short, etc). - -1999-03-12 Jim Blandy <jimb@zwingli.cygnus.com> - - * gdb.base/call-strs.exp: Don't assume that `step' will step over - a call to strlen; sometimes we do have sources. - -1999-03-08 Jim Blandy <jimb@zwingli.cygnus.com> - - * gdb.base/call-ar-st.c (main): Terminate char_array with a null - character, so GDB won't print garbage after its end. - - * gdb.base/call-ar-st.exp: Don't step into sum_array_print; set a - breakpoint there instead. Sometimes GCC emits memcpy to handle - the large structures being passed by value, so we step into that - instead of sum_array_print, which obscures what we're really testing. - * gdb.base/step-test.exp: However, we do want a test that notices - the bizarre steps into memcpy, so do that here. Add check for - stepping into function calls that pass large structures by value. - ("Is that a noun clause, or are you just happy to see me?") - Remove all references to specific line numbers. - * gdb.base/step-test.c (struct rhomboidal, large_struct_by_value): - New type and function. - (main): Call large_struct_by_value, passing it a large struct by value. - * lib/gdb.exp (gdb_get_line_number): New function. - - * gdb.base/step-test.exp: Rewrite `stepi' and `nexti' tests to be - more portable. - -1999-03-08 Jim Blandy <jimb@zwingli.cygnus.com> - - * lib/gdb.exp: Doc fixes. - -1999-03-05 Nick Clifton <nickc@cygnus.com> - - * gdb.base/a2-run.exp: Add expected fails for strongarm-coff. - -1999-03-04 Jim Blandy <jimb@zwingli.cygnus.com> - - * gdb.base/display.exp: Don't exercise the "detach" and "kill" - commands. They're not germane to this test, and they don't work - that way on remote targets. - -1999-03-01 James Ingham <jingham@cygnus.com> - - * Changelog entries merged over from gdb development branch. - - Tue Jan 5 12:33:47 1999 Keith Seitz <keiths@cygnus.com> - - * lib/gdb.exp (gdbtk_analyze_results): Generic function - for outputting results of test run. - - 1998-12-07 Martin M. Hunt <hunt@cygnus.com> - - * lib/gdb.exp (gdbtk_start): Fix path for itcl library. - -1999-02-25 Felix Lee <flee@cygnus.com> - - * lib/gdb.exp (debug_format): initialize - -1999-02-25 Jason Molenda (jsm@bugshack.cygnus.com) - - * gdb.base/call-ar-st.c: Include string.h, not strings.h. - * gdb.base/call-rt-st.c: Ditto. - -1999-02-13 Jim Blandy <jimb@zwingli.cygnus.com> - - * gdb.threads/pthreads.exp (horiz): New variable. - (test_startup): Fix regexps that capture thread numbers. - -1999-02-10 Jason Molenda (jsm@bugshack.cygnus.com) - - * gdb.base/smoke.exp: Disambiguate two test case names (both - called ``print''). - -Fri Feb 5 12:42:56 1999 Stan Shebs <shebs@andros.cygnus.com> - - * gdb.base/volatile.exp: Use gdb_test, add xfails for GCC - compilation. - -1999-02-04 Jason Molenda (jsm@bugshack.cygnus.com) - - * gdb.base/miscexprs.exp: Change patterns to match GDB's - actual output formatting. - * gdb.base/smoke.exp: GDB removes leading 0's. - * gdb.base/volatile.exp: Don't check type of remuneration; - that variable is no longer defined in constvars.c. - * gdb.base/step-test.c (main): Exit with explicit exit code. - * gdb.base/step-test.exp: Remove two nexti checks--they are - not portable. - -1999-02-04 Jason Molenda (jsm@bugshack.cygnus.com) - - * gdb.base/help.exp ("help delete display"): Fix test to match - gdb's output. - - * gdb.base/long_long.c (known_types): Initialize values to zero. - * gdb.base/long_long.exp: Step one more line - so 'dec' is initialized in "get to known place". GDB removes - leading zeros. Explicitly ask for hex formatting. Use - unique test case names. - -Tue Feb 2 10:16:08 1999 Elena Zannoni <ezannoni@kwikemart.cygnus.com> - - * lib/gdb.exp (gdb_preprocess): Remove 'puts' statement. - - * gdb.c++/method.exp: Add missing close brace. - -1999-01-30 Jim Blandy <jimb@zwingli.cygnus.com> - - * gdb.base/maint.exp: Use 'set height 0' to disable page - prompting, not 'set height 400'. - - Fix a bunch of timeouts. - * gdb.base/maint.exp ("maint print objfiles"): Break this up into - four separate tests, so expect doesn't take forever to match a ton - of text against a regexp with lots of .* forms. - ("maint print psymbols", "maint print symbols"): Make some of - these greps more selective, so that expect doesn't try to wade - through huge piles of output and time out. - - * gdb.base/maint.exp ("maint print msymbols"): Fix pattern. - - * gdb.base/maint.exp ("maint info breakpoints"): Split into two - tests: one which doesn't expect shlib events to be reported, and - another which does, but is XFAIL for all platforms other than - HP/UX. - - * gdb.base/break.exp: Teach the test suite that the `catch - fork', `catch vfork', and `catch exec' commands produce error - messages on platforms that don't provide these features. - -Mon Jan 25 18:35:56 1999 Stan Shebs <shebs@andros.cygnus.com> - - * gdb.hp/gen-so-thresh.c, so-thresh.sh, so-thresh.exp, - so-thresh.linkopts, so-thresh.mk: Move to gdb.hp from gdb.base - (shortening names from solib_threshold.exp etc), won't run on - anything but HP-UX for the foreseeable future. - * gdb.hp/Makefile.in, gdb.base/Makefile.in (clean): Adjust to - reflect move. - -Thu Jan 21 15:46:49 1999 Stan Shebs <shebs@andros.cygnus.com> - - * gdb.base/Makefile.in, gdb.c++/Makefile.in, - gdb.trace/Makefile.in (clean): Remove all test executables. - -Tue Jan 19 17:20:09 1999 David Taylor <taylor@texas.cygnus.com> - - * gdb.base/shlib-call.exp: add test cases to verify that gdb - successfully re-sets breakpoints in shared libraries. - * gdb.base/shmain.c (main): return 0, don't fall off the end. - -Fri Jan 15 14:04:57 1999 Elena Zannoni <ezannoni@kwikemart.cygnus.com> - - * gdb.hp/xdb3.exp: do not execute unless on hppa-hpux platform - and compiled w/o GCC. - - * gdb.hp/watch-cmd.exp: ditto. - - * gdb.hp/watch-hp.exp: ditto. - - * gdb.hp/xdb1.exp: ditto. - - * gdb.hp/xdb2.exp: ditto. - - * gdb.hp/dbx.exp: ditto. - -Thu Jan 14 18:36:48 1999 Stan Shebs <shebs@andros.cygnus.com> - - * constvars.c: Remove C++-isms. - * constvars.exp: Use gdb_test everywhere, add xfails if compiled - with GCC. - -Mon Jan 11 10:08:03 1999 David Taylor <taylor@texas.cygnus.com> - - The following changes are part of the HP merge. - - * gdb.base/break.exp: new tests to verify that catchpoints for - fork, vfork, and exec don't trigger inappropriately. - - * gdb.base/opaque.exp: compile one file at a time, then link. - - * gdb.base/signals.exp: be more restrictive about which hppa - systems receive a setup_xfail. new tests. - - * gdb.base/solib_threshold.build: new file. - * gdb.base/solib_threshold.exp: new file. - * gdb.base/solib_threshold.link_opts: new file. - * gdb.base/solib_threshold.mk: new file. - * gdb.base/gen_solib_threshold.c: new file. - - * gdb.c++/classes.exp: if on HPUX and not using gcc, skip the - tests. New tests for enums inside classes. - - * gdb.c++/compiler.cc: indicate support of template debugging. - - * gdb.c++/demangle.exp: run hp style demangling tests. - - * gdb.c++/inherit.exp: if on HPUX and not using gcc, skip the - tests. - - * gdb.c++/misc.cc: changes to support new tests. - - * gdb.c++/templates.cc: changes to support HP's compiler; changes - to support new tests. - - * gdb.c++/virtfunc.exp: if we are on HPUX and we are not using - gcc, then skip these tests. - -Sun Jan 10 23:44:11 1999 David Taylor <taylor@texas.cygnus.com> - - The following files are part of the HP merge; some had longer - names at HP, but have been renamed to be no more than 14 - characters in length. - - * gdb.hp/ambiguous.cc: new file. - * gdb.hp/ambiguous.exp: new file. - * gdb.hp/attach.exp: new file. - * gdb.hp/attach2.exp: new file. - * gdb.hp/classes-hp.exp: new file. - * gdb.hp/ctti.exp: new file. - * gdb.hp/ctti-add.cc: new file. - * gdb.hp/ctti-add1.cc: new file. - * gdb.hp/ctti-add2.cc: new file. - * gdb.hp/ctti-add3.cc: new file. - * gdb.hp/dbx.exp: new file. - * gdb.hp/exception.cc: new file. - * gdb.hp/exception.exp: new file. - * gdb.hp/foll-exec.c: new file. - * gdb.hp/foll-exec.exp: new file. - * gdb.hp/foll-fork.c: new file. - * gdb.hp/foll-fork.exp: new file. - * gdb.hp/foll-vfork.c: new file. - * gdb.hp/foll-vfork.exp: new file. - * gdb.hp/inherit-hp.exp: new file. - * gdb.hp/more-steps.exp: new file. - * gdb.hp/namespace.cc: new file. - * gdb.hp/namespace.exp: new file. - * gdb.hp/optimize.exp: new file. - * gdb.hp/pxdb.c: new file. - * gdb.hp/pxdb.exp: new file. - * gdb.hp/quicksort.exp: new file. - * gdb.hp/reg-test.exp: new file. - * gdb.hp/reg-test.s: new file. - * gdb.hp/sized-enum.c: new file. - * gdb.hp/sized-enum.exp: new file. - * gdb.hp/start-stop.exp: new file. - * gdb.hp/templ-hp.cc: new file. - * gdb.hp/templ-hp.exp: new file. - * gdb.hp/thr-lib.c: new file. - * gdb.hp/thr-lib.exp: new file. - * gdb.hp/thr-lib.h: new file. - * gdb.hp/thr-liblib.c: new file. - * gdb.hp/virtfun-hp.c: new file. - * gdb.hp/virtfun-hp.exp: new file. - * gdb.hp/watch-cmd.exp: new file. - * gdb.hp/watch-hp.exp: new file. - * gdb.hp/xdb1.exp: new file. - * gdb.hp/xdb2.exp: new file. - * gdb.hp/xdb3.exp: new file. - -Wed Jan 6 18:41:15 1999 David Taylor <taylor@texas.cygnus.com> - - The following files are part of the HP merge; some had longer - names at HP, but have been renamed to be no more than 14 - characters in length. - - * gdb.base/ss.h: new file. - * gdb.base/call-ar-st.c: new file. - * gdb.base/call-ar-st.exp: new file. - * gdb.base/call-rt-st.c: new file. - * gdb.base/call-rt-st-exp: new file. - * gdb.base/call-strs.exp: new file. - * gdb.base/ena-dis-br.exp: new file. - * gdb.base/environ.exp: new file. - * gdb.base/long_long.exp: new file. - * gdb.base/sect-cmd.exp: new file. - * gdb.base/shlib-cl2.exp: new file. - * gdb.base/smoke.exp: new file. - * gdb.base/so-impl-ld.c: new file. - * gdb.base/so-impl-ld.exp: new file. - * gdb.base/so-indr-cl.c: new file. - * gdb.base/so-indr-cl.exp: new file. - * gdb.base/varargs.exp: new file. - * gdb.base/volatile.exp: new file. - * gdb.base/whatis-exp.exp: new file. - * gdb.base/display.exp: new file. - * gdb.c++/derivation.exp: new file. - * gdb.c++/local.exp: new file. - * gdb.c++/member-ptr.exp: new file. - * gdb.c++/overload.exp: new file. - * gdb.c++/ovldbreak.exp: new file. - * gdb.c++/ref-types.exp: new file. - * gdb.c++/ref-types2.exp: new file. - * gdb.c++/userdef.exp: new file. - -Wed Jan 6 13:50:57 1999 Stan Shebs <shebs@andros.cygnus.com> - - * gdb.base/default.exp: Reflect wording change in remote.c. - -Tue Jan 5 19:14:51 1999 Michael Snyder <msnyder@cygnus.com> - - * gdb.base/help.exp: Update to reflect current text. - -Tue Jan 5 13:05:32 1999 David Taylor <taylor@texas.cygnus.com> - - * gdb.c++/anon-union.cc: make foo and bar global, otherwise - they're stack variables and contain garbage. - * gdb.c++/anon-union.exp: new file. - - The following changes were made by David Taylor - <taylor@cygnus.com>, Elena Zannoni <ezannoni@cygnus.com>, and - Edith Epstein <eepstein@cygnus.com> as part of a project to merge - in changes by HP. - - * gdb.base/bitops.exp: new file. - * gdb.base/default.exp: change expected messages for catch and - info catch tests to reflect HP merge changes. - * gdb.base/enable-disable-break.exp - * gdb.base/ending-run.c: new file. - * gdb.base/long_long.c: new file. - * gdb.base/maint.exp: new file. - * gdb.base/pointers2.exp: new file. - * gdb.base/shlib-call2.exp: new file. - * gdb.base/solib.exp: new file. - * gdb.base/step-test.c: new file. - * gdb.c++/anon-union.cc: new file. - * gdb.c++/local.cc: new file. - * gdb.c++/member-pointer.cc: new file. - * gdb.c++/method.cc: new file. - * gdb.c++/ref-types.cc: new file. - * gdb.c++/ref-types2.cc: new file. - * gdb.c++/userdef.cc: new file. - - * gdb.base/scope.exp: compile one file at a time, then link. - * gdb.base/langs.exp: ditto. - * gdb.base/list.exp: ditto. - -Mon Jan 4 10:06:43 1999 David Taylor <taylor@texas.cygnus.com> - - The following changes were made by David Taylor - <taylor@cygnus.com>, Elena Zannoni <ezannoni@cygnus.com>, and - Edith Epstein <eepstein@cygnus.com> as part of a project to merge - in changes by HP. - - * gdb.c++/inherit.exp: if on hppa*-*-hpux* and not using gcc, - skip tests. When compiling pass c++ flag to gdb_compile. - * gdb.c++/ - - * lib/gdb.exp (get_compiler_info): new, optional argument -- args; - test for on hppa*-*-hpux*; use args to see if c++ was specified. - (skip_hp_tests): new function. - (gdb_preprocess): new function. - - * configure.in (hpdir): decide whether to configure gdb.hp. - * configure: regenerated. - - * gdb.base/Makefile.in (MISCELLANEOUS): new macros -- extra things - to delete on clean. - (EXECUTABLES): update to reflect new additions. - * gdb.base/commands.exp: update message expected. - * gdb.base/default.exp: add copyright notice. - * gdb.base/funcargs.exp (timeout): if hpux, increase timeout. - * gdb.base/help.exp: update messages to reflect current text. - * gdb.base/recurse.exp: add hpppa*-*-bsd* to 'list' of enabled - targets for recurse tests. - * gdb.base/watchpoint.exp: if on hpux and not gcc compiled, then - skip this file. - - * gdb.c++/Makefile.in (PROGS): update to reflect new executables. - * gdb.c++/cplusfuncs.exp: tell gdb_compile that it's a c++ - compilation. - * gdb.c++/misc.exp: ditto. - * gdb.c++/templates.exp: if we're on hpux and it's not gcc, don't - run the tests. tell gdb_compile that it's a c++ compilation. - - * gdb.threads/pthreads.exp: fix typo in message. - - * gdb.base/all-bin.exp: new file. - * gdb.base/arithmet.exp: new file. - * gdb.base/assign.exp: new file. - * gdb.base/completion.exp: new file. - * gdb.base/cond-expr.exp: new file. - * gdb.base/condbreak.exp: new file. - * gdb.base/define.exp: new file. - * gdb.base/dollar.exp: new file. - * gdb.base/environment.exp: new file. - * gdb.base/eval-skip.exp: new file. - * gdb.base/jump.exp: new file. - * gdb.base/logical.exp: new file. - * gdb.base/pointers.exp: new file. - * gdb.base/relational.exp: new file. - * gdb.base/section_command.exp: new file. - * gdb.base/whatis-expr.exp: new file. - - * gdb.base/all-types.c: new file. - * gdb.base/call-array-struct.c: new file. - * gdb.base/call-return-struct.c: new file. - * gdb.base/call-strings.c: new file. - * gdb.base/callfuncs2.c: new file. - * gdb.base/condbreak.c: new file. - * gdb.base/constvars.c: new file. - * gdb.base/display.c: new file. - * gdb.base/int-type.c: new file. - * gdb.base/jump.c: new file. - * gdb.base/miscexprs.c: new file. - * gdb.base/pointers.c: new file. - * gdb.base/pointers2.c: new file. - * gdb.base/shmain.c: new file. - * gdb.base/shr1.c: new file. - * gdb.base/shr2.c: new file. - * gdb.base/solib.c: new file. - * gdb.base/solib1.c: new file. - * gdb.base/solib2.c: new file. - * gdb.base/varargs.c: new file. - * gdb.c++/derivation.cc: new file. - * gdb.c++/overload.cc: new file. - * gdb.c++/ovldbreak.cc: new file. - * gdb.hp/attach.c: new file. - * gdb.hp/attach2.c: new file. - * gdb.hp/average.c: new file. - * gdb.hp/compiler.c: new file. - * gdb.hp/compiler.cc: new file. - * gdb.hp/execd-program.c: new file. - * gdb.hp/follow-exec.c: new file. - * gdb.hp/follow-fork.c: new file. - * gdb.hp/follow-vfork-and-exec.c: new file. - * gdb.hp/misc-hp.cc: new file. - * gdb.hp/more-steps.c: new file. - * gdb.hp/optimize.c: new file. - * gdb.hp/quicksort.c: new file. - * gdb.hp/run-hp.c: new file. - * gdb.hp/start-stop.c: new file. - * gdb.hp/sum.c: new file. - * gdb.hp/templates-hp.cc: new file. - * gdb.hp/thread-local-in-lib.c: new file. - * gdb.hp/thread-local-in-lib.h: new file. - * gdb.hp/thread-local-in-lib.lib.c: new file. - * gdb.hp/vforked-program.c: new file. - * gdb.hp/virtfunc-hp.cc: new file. - * gdb.hp/watchpoint-hp.c: new file. - * gdb.hp/xdb.c: new file. - * gdb.hp/xdb0.c: new file. - * gdb.hp/xdb0.h: new file. - * gdb.hp/xdb1.c: new file. - -Mon Dec 21 14:08:38 1998 David Taylor <taylor@texas.cygnus.com> - - The following change was made by Edith Epstein - <eepstein@cygnus.com> as part of a project to merge in changes - originally made by HP; HP did not create ChangeLog entries. - - * gdb.c++/demangle.exp: changed the expected output for some - ARM-style mangling -- removed second reference to datatype. - For example, maint demangle __dt__11T1__pt__2_cFv - T1<char>::~T1<char>(void) - becomes, - maint demangle __dt__11T1__pt__2_cFv - T1<char>::~T1(void) - - (test_hp_style_demangling): new hp specific demangling test cases. - -Mon Dec 14 15:07:03 1998 Jeffrey A Law (law@cygnus.com) - - * gdb.trace/actions.exp: Ignore compiler warnings compiling actions.c - * gdb.trace/backtrace.exp: Likewise. - * gdb.trace/circ.exp: Likewise. - * gdb.trace/collection.exp: Likewise. - * gdb.trace/deltrace.exp: Likewise. - * gdb.trace/infotrace.exp: Likewise. - * gdb.trace/limits.exp: Likewise. - * gdb.trace/packetlen.exp: Likewise. - * gdb.trace/passc-dyn.exp: Likewise. - * gdb.trace/passcount.exp: Likewise. - * gdb.trace/report.exp: Likewise. - * gdb.trace/save-trace.exp: Likewise. - * gdb.trace/tfind.exp: Likewise. - * gdb.trace/tracecmd.exp: Likewise. - * gdb.trace/while-dyn.exp: Likewise. - * gdb.trace/while-stepping.exp: Likewise. - -1998-12-07 Jim Blandy <jimb@zwingli.cygnus.com> - - * gdb.base/restore.exp, gdb.base/restore.c: New tests. - -Wed Dec 2 20:03:53 1998 Stan Shebs <shebs@andros.cygnus.com> - - From Brendan Kehoe: - * gdb.c++/cplusfuncs.cc, misc.cc, virtfunc.cc: Add now-required - int return types. - -Sat Oct 24 18:04:22 1998 Felix Lee <flee@cygnus.com> - - * config/slite.exp (gdb_load): use gdb_file_cmd, so we can do - remote dos host testing right. - -Mon Oct 19 01:31:59 1998 Felix Lee <flee@cygnus.com> - - * gdb.base/corefile.exp: remove some xfails. - -Thu Oct 15 10:04:38 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * gdb.base/reread.exp: Sleep 1 - ensures that the two executables - have different timestamps. - -Thu Oct 1 20:56:14 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * lib/gdb.exp, gdb.base/default.exp, config/monitor.exp, - gdb.base/default.exp: Replace "exec" with "executable". - -Tue Sep 29 15:06:29 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * gdb.base/default.exp: Change else if to elseif from previous - delta. - -Mon Sep 28 13:21:43 1998 Nick Clifton <nickc@cygnus.com> - - * gdb.base/default.exp: Add brace missing from previous delta. - -Mon Sep 21 14:39:27 1998 Nick Clifton <nickc@cygnus.com> - - * gdb.base/default.exp: Support test for info float for all - varieties of arm toolchain. - -Fri Sep 18 14:07:44 1998 Michael Snyder <msnyder@cygnus.com> - - * gdb.trace/*.exp: remove "remote_download" command. - -Wed Sep 16 11:38:21 1998 Michael Snyder <msnyder@cygnus.com> - - * gdb.trace/*.exp: remove -gdwarf from compile. - -Wed Sep 16 01:23:11 1998 Felix Lee <flee@cygnus.com> - - * gdb.trace/configure.in(AC_INIT): typo - * gdb.trace/configure: regenerated - -Mon Sep 14 20:00:04 1998 Michael Snyder <msnyder@cygnus.com> - - * config/m68k-emc.exp: New file. - * lib/<emc-support.exp trace-support.exp}: New files. - * configure.in: add new test directory gdb.trace. - * gdb.trace/{configure configure.in Makefile.in}: New files. - * gdb.trace/{actions.c actions.exp gdb_c_test.c}: New files. - * gdb.trace/{circ.c circ.exp limits.c limits.exp}: New files. - * gdb.trace/{collection.c collection.exp tfind.exp }: New files. - * gdb.trace/{backtrace.exp deltrace.exp infotrace.exp}: New files. - * gdb.trace/{packetlen.exp passc-dyn.exp passcount.exp}: New files. - * gdb.trace/{report.exp save-trace.exp tracecmd.exp}: New files. - * gdb.trace/{while-dyn.exp while-stepping.exp}: New files. - -Fri Sep 11 13:58:02 1998 Michael Snyder <msnyder@cygnus.com> - - * gdb.c++/classes.exp: Change all regular expressions to match - arbitrary combinations of newline/carriage-return, so that they - will work equally well on Unix and Windows. - * gdb.c++/inherit.exp: ditto. - * gdb.c++/virtfunc.exp: ditto. - -1998-08-11 Dawn Perchik <dawn@cygnus.com> - - * gdb.base/setshow.exp: Fix error introduced by call to runto_main. - -Fri Jul 24 15:51:34 1998 Jeffrey A Law (law@cygnus.com) - - * gdb.disasm/am33.s: Add tests for autoincrement instructions. - * gdb.disasm/am33.exp: Run time. Update tests which use r8-r15 - to use a0-a3/d0-d3 as needed. - -Thu Jul 16 18:20:46 1998 Jeffrey A Law (law@cygnus.com) - - * gdb.disasm/am33.s: Add 4 operand mul and mulu tests. - * gdb.disasm/am33.exp: Corresponding changes. - -1998-07-11 Felix Lee <flee@cygnus.com> - - * gdb.base/callfuncs.exp: add cmp10 test. - * gdb.base/callfuncs.c (cmp10): new function. - -Thurs Jul 9 11:08:31 1998 Dawn Perchik <dawn@cygnus.com> - - * gdb.base/commands.exp: Break up infrun_breakpoint_command_test - into two parts to get around a synchronization problem in expect. - -Fri Jun 26 14:27:13 1998 Keith Seitz <keiths@cygnus.com> - - * lib/gdb.exp (gdbtk_start): Add startup for gdbtk. - - * configure.in: Add options for gdbtk testsuite. - - * configure: Regenerate. - - * gdb.gdbtk: New directory to hold gdbtk tests. - -Fri Jun 26 14:52:47 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de> - - * gdb.fortran/types.exp: Escape brackets in expect patterns - for test_float_literal_types_accepted tests. - * gdb.base/scope.exp: Remove extraneous newline in filelocal_bss - before run test. - -Fri Jun 26 11:12:17 1998 Jeffrey A Law (law@cygnus.com) - - * am33.exp: Just compile, do not link the testcase. - * am33.s: Add ".am33" pseudoop to force am33 mode. - -1998-06-25 Felix Lee <flee@cygnus.com> - - * gdb.base/setshow.exp: make sure $pc is sane. - - * gdb.stabs/weird.exp: split expect patterns properly. - -Wed Jun 24 13:03:15 1998 Jeffrey A Law (law@cygnus.com) - - * gdb.disasm/am33.s: New disassembler testfile for the am33. - * gdb.disasm/am33.exp: Run it. - -Tue Jun 23 11:45:01 1998 Michael Snyder <msnyder@cygnus.com> - - * gdb.base/funcargs.exp: simplify expect strings to ease pattern - match processing (and eliminate spurious timeouts when running). - -Fri Jun 12 17:28:22 1998 Michael Snyder <msnyder@cygnus.com> - - * gdb.base/signals.exp (test_handle_all_print): put back Mach - exception test, but conditionalize it on target [mach | gnu]. - -Wed Jun 10 10:40:03 1998 Michael Snyder <msnyder@cygnus.com> - - * gdb.base/overlays.exp: fixup compile line for linker script. - -Thu Jun 4 21:54:15 1998 Felix Lee <flee@zog.cygnus.com> - - * gdb.fortran/types.exp: don't guess at float size. - -Thu May 21 02:28:37 1998 Felix Lee <flee@zog.cygnus.com> - - * gdb.base/exprs.exp: delete test that depends on int size. - -Sun May 17 17:10:22 1998 Bob Manson <manson@charmed.cygnus.com> - - * config/sim.exp: Removed checks for target triplets. - (gdb_target_sim): Use gdb,target_sim_options. - -Sat May 16 23:43:35 1998 Mark Alexander <marka@cygnus.com> - - * gdb.base/reread.exp: New file. - * gdb.base/reread1.c: New file. - * gdb.base/reread2.c: New file. - -Sat May 16 23:22:09 1998 Mark Alexander <marka@cygnus.com> - - * config/sim.exp: Use 'target sim -sparclite' when running - SPARClite programs. - -Sat May 16 18:48:08 1998 Doug Evans <devans@canuck.cygnus.com> - - * gdb.base/structs2.exp: New file. - * gdb.base/structs2.c: New file. - -Wed May 13 13:36:14 1998 Doug Evans <devans@canuck.cygnus.com> - - * gdb.asm/common.inc: New file. - * gdb.asm/d10v.inc: New file. - * asm-source.exp: Pass -I's to gas to find .inc files. - Update line numbers in expected output. - * asmsrc1.s: Rewrite. - * asmsrc2.s: Rewrite. - * configure.in: Create arch.inc symlink. - * configure: Regenerate. - * Makefile.in (distclean): Delete arch.inc. - -Wed May 6 10:30:54 1998 John Metzler <jmetzler@cygnus.com> - - * callfuncs.c (t_enum_value1) : Cleanup return value warnings - (t_enum_value2): ditto - (t_enum_value3): ditto - (main): ditto -Fri May 1 09:33:37 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de> - - * gdb.base/break.exp: Remove xfail for `deleting all breakpoints - when none' unexpected prompt case, fixed by breakpoint.c:delete_command - change. - Use gdb_test instead of send_gdb/gdb_expect sequences. - -Thu Apr 23 12:56:19 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * gdb.c++/virtfunc.cc: Declare extern "C" printf to return int, - not void. - -Thu Apr 16 10:52:34 1998 John Metzler <jmetzler@cygnus.com> - - * gdb.base/branches.c: Code with lots of loops and - subroutines. Used to test gdbs ability to single step through PC - changes, especially to test mips-tdep.c:mips_next_pc - -Mon Apr 13 22:32:51 1998 Frank Ch. Eigler <fche@cygnus.com> - - * gdb.c++/virtfunc.cc: Make extern "C" printf declaration pass - more rigorous EGCS C++ error checking. - -Fri Apr 10 22:38:12 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.base/help.exp: Clean up `help set args' and `help show args' - tests. - * gdb.base/interrupt.exp: Add "i*86-*-solaris2*" xfail for calling - function when asleep. - * gdb.base/signals.exp: Add "i*86-*-solaris2*" xfails. Add comment - for i*86 Linux and SVR4 signal handling problems. - Remove linux xfail for `next to handler in signals_tests_1', fixed - by recent infrun.c change. - Limit backtrace to 10 frames to avoid timeout problems with infinite - stack backtraces. - Adjust expect pattern in `handle all print' test to match Apr 28 1997 - target.[ch] change. - -Tue Mar 31 00:40:32 1998 Bob Manson <manson@charmed.cygnus.com> - - * lib/gdb.exp(gdb_test): Send multiline commands one at a time; wait - for a newline from gdb before continuing. - (default_gdb_exit): Just look for y or n. - (gdb_test): Detect abnormal exit from GDB running on DOS; if - it does, fail the rests of the tests in the file. - -Tue Mar 24 22:44:52 1998 Bob Manson <manson@charmed.cygnus.com> - - * config/cygmon.exp: New file. - -Mon Mar 16 21:39:11 1998 Bob Manson <manson@charmed.cygnus.com> - - * gdb.base/list.exp: Fix problem with "list default lines around - main" test on remote targets. - - * gdb.base/scope.exp: Fix problem with filelocal_bss before - run test on remote targets. - -Thu Mar 12 16:23:00 1998 Doug Evans <devans@canuck.cygnus.com> - - * gdb.asm: New directory. - * configure.in: Configure it. - * configure: Regenerate. - * gdb.asm/{Makefile.in,configure.in,configure}: New files. - * gdb.asm/{asm-source.exp,asmsrc1.s,asmsrc2.s}: New files. - -Mon Feb 23 08:22:44 1998 Mark Alexander <marka@cygnus.com> - - * config/mn10300-eval.exp: New file to support MN10300 eval board. - -Wed Feb 18 16:43:46 1998 Michael Snyder (msnyder@cygnus.com) - - * gdb.base/overlays (several files): Merge the two overlay - managers into one. Change variables (foox, barx, bazx, grbxx) - back into ints but force them to load in their proper sections. - -Thu Feb 12 13:49:30 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * gdb.base/d10vovly.c (D10VTranslate): Map IMAP0 to low 128k of - on-chip insn memory and IMAP1 to upper 128k. - (D10VCopy): Handle memory regions crossing 16k boundaries. - (D10VCopy): Transfer data in 32 bit chunks. - -Tue Feb 10 17:23:22 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * gdb.base/overlays.c (main): Exit normally when result is - correct. - - * gdb.base/d10v.ld: Update LMAs to reflect current d10v address - map. Include space for printf in .text segment. - - * gdb.base/d10vovly.c (D10VTranslate): New function, handle - updated d10v memory VMA/LMA map. - (D10VCopy): Call D10VTranslate. - -Fri Feb 6 14:13:12 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * gdb.base/m32rovly.c: Force variable _novlys into .data section. - - * gdb.base/bar.c (barx, bar): Change variable to small array so - that it won't be put into the .sdata - small data - - section. Update reference. - * gdb.base/baz.c (bazx, baz): Ditto. - * gdb.base/foo.c (foox, foo): Ditto. - * gdb.base/grbx.c (grbxx, grbx): Ditto. - - * gdb.base/overlays.exp: Expect variables barx, bazx, foox, grbxx - to be arrays. - -Thu Jan 29 14:48:19 1998 Michael Snyder (msnyder@cygnus.com) - - * gdb.base/overlays.exp: fix up and get working again. - Add tests for backtraces from an overlay function. - -Fri Jan 23 07:52:45 1998 Fred Fish <fnf@cygnus.com> - - * gdb.base/watchpoint.exp: Set "d10v*-*-*" clear_xfail for - "calling function with watchpoint enabled". - -Thu Jan 22 14:23:29 1998 Fred Fish <fnf@cygnus.com> - - * gdb.base/break.exp (test_next_with_recursion): Remove - gdb_suppress_tests for d10v-*-*. - * lib/gdb.exp (gdb_suppress_tests): Disable this function - pending review of whether it is useful or not. - -Tue Jan 20 13:02:09 1998 Mark Alexander <marka@cygnus.com> - - * gdb.base/funcargs.exp: Increase timeout for slow TX39 boards. - -Mon Jan 19 08:53:04 1998 Mark Alexander <marka@cygnus.com> - - * gdb.base/break.exp: Increase timeout for slow TX39 boards. - * config/dve.exp: New file to support Densan boards. - -Mon Dec 15 22:38:05 1997 Andrew Cagney <cagney@b1.cygnus.com> - - * gdb.base/interrupt.exp: Document problem of simulators, signals, - reads and BSD. - -Wed Nov 26 22:29:18 1997 Bob Manson <manson@charmed.cygnus.com> - - * config/monitor.exp: Be a bit less picky about the "Remote debugging" - response. - - * gdb.c++/misc.exp: Call runto_main instead of doint it manually. - -Tue Nov 25 12:46:36 1997 Andrew Cagney <cagney@b1.cygnus.com> - - * gdb.base/mips_pro.exp: Add "mips64*-*-elf" xfail for backtrace - test. - - * gdb.base/funcargs.exp: Query GDB for target_sizeof_int, - target_sizeof_long and target_bigendian_p. - (structs_by_value, structs_by_reference): Check values according - to targets word size and endianess. - -Mon Nov 24 16:37:06 1997 Andrew Cagney <cagney@b1.cygnus.com> - - * gdb.base/langs.exp: For "continue to exit" ignore any trailing - output. - -Fri Oct 17 13:24:43 1997 Stan Shebs <shebs@andros.cygnus.com> - - * gdb.base/default.exp, gdb.base/help.exp, gdb.base/setshow.exp: - Update test of set args help to match source change. - -Fri Sep 26 17:36:20 1997 Jason Molenda (crash@pern.cygnus.com) - - * gdb.base/default.exp: Expect help system output to be in - alphabetical order. - * gdb.base/help.exp: Ditto. - -Wed Sep 24 13:08:14 1997 Bob Manson <manson@charmed.cygnus.com> - - * gdb.base/signals.exp: Change "i*86-pc-linux-gnu" to - "i*86-pc-linux-gnu*". - * gdb.base/interrupt.exp: Ditto. - * gdb.base/corefile.exp: Ditto. - - * lib/gdb.exp(gdb_compile): If is_vxworks target feature is set, - define vxworks when building the testcase. - - * gdb.base/ptype.exp: Fix testnames to be unique. - * gdb.base/radix.exp: Ditto. - * gdb.base/term.exp: Ditto. - * gdb.base/whatis.exp: Ditto. - * gdb.c++/classes.exp: Ditto. - -Tue Sep 16 22:21:48 1997 Bob Manson <manson@charmed.cygnus.com> - - * gdb.base/callfuncs.exp: Fix indentation. - - * lib/gdb.exp(gdb_expect): Set remote_suppress_flag if - suppress_flag has been set. - (gdb_step_for_stub): Check for gdb,use_breakpoint_for_stub - target feature. - -Mon Sep 15 15:43:17 1997 Bob Manson <manson@charmed.cygnus.com> - - * gdb.stabs/weird.exp: Don't start gdb 'til after we've compiled - the testcase. - - * gdb.c++/cplusfuncs.cc(main): Add extern "C" declaration for - set_debug_traps() and breakpoint(). - * gdb.c++/misc.cc (main): Ditto. - * gdb.c++/templates.cc (main): Ditto. - * gdb.c++/virtfunc.cc (main): Ditto. - -Fri Sep 12 16:56:38 1997 Bob Manson <manson@charmed.cygnus.com> - - * lib/gdb.exp(gdb_step_for_stub): New function. - (gdb_run_cmd): Look for gdb,do_reload_on_run target feature--if it - exists, reload the executable and do a "continue" instead of - doing a jump. - (runto_main): Use gdb_step_for_stub. - - * gdb.base/break.exp: Use gdb_step_for_stub. Also, rename certain - tests to have unique names. - * gdb.base/callfuncs.exp: Ditto. - * gdb.base/commands.exp: Ditto. - * gdb.base/default.exp: Ditto. - * gdb.base/help.exp: Ditto. - * gdb.base/list.exp: Ditto. - * gdb.base/opaque.exp: Ditto. - * gdb.base/printcmds.exp: Ditto. Use a loop to emit multiple - similar tests. - - * gdb.base/setshow.c: Add set_debug_traps/breakpoint calls. - * gdb.c++/cplusfuncs.cc: Ditto. - * gdb.c++/virtfunc.cc: Ditto. - - * config/monitor.exp: Keep track of the last file we saw, rather - than trying to get the info from gdb. - - * gdb.fortran/types.exp: Move comment to previous line. - -Tue Sep 2 19:55:34 1997 Bob Manson <manson@charmed.cygnus.com> - - * config/sparclet.exp: Detect gratuitous change to sparclet gdb - target mode. - -Mon Jul 28 12:14:47 1997 Stan Shebs <shebs@andros.cygnus.com> - - From Bob Manson: - * config/monitor.exp (gdb_target_monitor): Look for "Connected to" - string from GDB when it connects. - - * lib/gdb.exp: Look for $TOOL_EXECUTABLE. - -Thu Jul 3 15:35:12 1997 Bob Manson <manson@charmed.cygnus.com> - - * lib/gdb.exp(get_debug_format): Don't cause the testsuite to fail - if we can't get a debug format from GDB (we may be testing an - older GDB). Use a 10 second timeout when checking for the format. - - * gdb.stabs/weird.exp: Fix quoting. - - * config/sparclet.exp: Renamed sparclet-loader.c to stub-loader.c. - -Mon Jun 30 18:31:43 1997 Bob Manson <manson@charmed.cygnus.com> - - * config/arm-ice.exp: New file. - -Sun Jun 29 16:43:30 1997 Bob Manson <manson@charmed.cygnus.com> - - * gdb.base/overlays.exp: Preliminary fixes; temporarily disabled - until it has been modified to work with the new testsuite. - - * gdb.*/*.exp: Instead of causing 1 unresolved test when the - testcase won't compile, cause all of the testcases in the file to - fail instead. - - * lib/gdb.exp(gdb_suppress_entire_file): New procedure. - (gdb_clear_suppressed): New procedure. - (gdb_stop_suppressing_tests): Only clear suppress_flag if - it contains a positive value. - -Sat Jun 28 13:31:11 1997 Bob Manson <manson@charmed.cygnus.com> - - * lib/gdb.exp(default_gdb_start): Use gdb_opts host feature. - - * gdb.c++/virtfunc.exp: Remove setting of libs variable. - -Fri Jun 27 07:44:25 1997 Fred Fish <fnf@cygnus.com> - - * lib/gdb.exp (setup_xfail_format): New function. - (get_debug_format): New function to get debug format. - (debug_format): New global variable to hold last value set - by get_debug_format. - * gdb.base/list.exp: Call get_debug_format and expect some - tests to fail for DWARF 1 and COFF formats. - * gdb.c++/ptype.exp: Ditto. - * gdb.c++/classes.exp: Ditto. - * gdb.c++/cplusfuncs.exp: Ditto. - * gdb.c++/inherit.exp: Ditto. - * gdb.c++/templates.exp: Ditto. - * gdb.c++/virtfunc.exp: Ditto. - -Wed Jun 25 09:08:51 1997 Bob Manson <manson@charmed.cygnus.com> - - * lib/gdb.exp(default_gdb_exit): Don't give an error if the remote - host doesn't have a currently-open connection. - - * config/sparclet.exp: Cleanups and fixes to make it generic for - any gdb stub target. Handle cases where gdb doesn't respond when - interrupted in a sane fashion. - - * config/m32r-stub.exp: Load sparclet.exp instead of trying to do the - same thing in a totally different way. - - * config/monitor.exp: Pass in timeouts to gdb_expect instead of - setting "timeout". - (gdb_start): We set the global gdb_prompt variable in - default_gdb_init now. - -Sun Jun 22 09:11:02 1997 Fred Fish <fnf@cygnus.com> - - * gdb.base/printcmds.exp: Fix "check for floating addition" - regexp to accept results within approx +/- .01 of exact value. - * lib/gdb.exp (gdb_test): Remove unused expect_out global decl. - -Wed Jun 18 11:11:39 1997 Bob Manson <manson@charmed.cygnus.com> - - * lib/gdb.exp(gdb_init): Pass our arguments to default_gdb_init - properly. - (gdb_expect): Add optional timeout parameter, and add timeout - value to various calls. - (gdb_suppress_tests): Only give one warning message per group. - -Tue Jun 17 13:10:10 1997 Bob Manson <manson@charmed.cygnus.com> - - * lib/gdb.exp(gdb_expect): Declare errorInfo and errorCode as - global variables. Handle getting a value for $timeout more - gracefully. - -Sat Jun 14 09:23:26 1997 Bob Manson <manson@charmed.cygnus.com> - - * lib/gdb.exp: Close connection to remote host if gdb doesn't - initialize. - (default_gdb_init): New procedure; allow gdb_init to be overridden - by a target configuration file. - (gdb_expect): Pass the timeout to remote_expect. - - * config/monitor.exp(gdb_load): Fix typo in regexp. - -Thu Jun 12 20:57:12 1997 Bob Manson <manson@charmed.cygnus.com> - - * gdb.base/funcargs.exp: Remove spurious suppress tests call. - -Tue Jun 3 15:20:20 1997 Bob Manson <manson@charmed.cygnus.com> - - * config/monitor.exp(gdb_target_monitor): Call gdb_file_cmd - here. Call gdb_target_exec before rebooting the target, to make - sure the connection to the target is closed. - (gdb_load): Pass the name of the executable to gdb_target_monitor. - Don't call gdb_file_cmd here; let gdb_target_monitor do it. - Also detect "Timeout reading from remote" error. - - * config/gdbserver.exp: Pass the executable being loaded to - gdb_target_monitor. Don't call gdb_file_cmd here; let - gdb_target_monitor do it. - - * gdb.disasm/hppa.exp: Don't use exec_output. - -Fri May 23 13:28:29 1997 Bob Manson <manson@charmed.cygnus.com> - - * gdb.base/list.exp: If we're debugging a non-native target, - try to set the pc register to point to the start of the - program before doing the first list command. - - * gdb.c++/virtfunc.exp(gdb_virtfunc_restart): Make sure we run - test_calls after restarting. - - * lib/gdb.exp(gdb_run_cmd): Send jump command again after - reloading. - - * gdb.base/watchpoint.exp: Fix typo. - - * gdb.base/setshow.exp: Check for use_gdb_stub. - - * gdb.base/break.exp: Fix continue until exit test for the gdb - stub case. - * gdb.base/langs.exp: Ditto. - - * config/monitor.exp(gdb_load): Handle gdb_sect_offset and - gdb_load_offset. If we weren't given a file to load, figure out - what the current file is and use it. - - * config/i386-bozo.exp: New file. - -Thu May 22 18:51:32 1997 Bob Manson <manson@charmed.cygnus.com> - - * lib/gdb.exp(gdb_expect): Look for gdb,timeout target - feature. - - * config/proelf.exp: New entry. - -Wed May 21 21:23:16 1997 Bob Manson <manson@charmed.cygnus.com> - - * lib/gdb.exp: Remove spurious .* patterns at the beginning - of regexps. - - * gdb.base/watchpoint.exp: Don't run the test_stepping - tests if gdb can't call functions on the target. - - * gdb.base/setshow.exp: Don't run the set prompt tests if - the board has gdb_prompt set. - -Tue May 20 08:58:49 1997 Jeffrey A Law (law@cygnus.com) - - * gdb.base/a2-run.exp: Change "gdb,noargs" to just "noargs". - * gdb.base/commands.exp: Likewise. - * gdb.base/setshow.exp: Likewise. - -Mon May 19 15:37:50 1997 Bob Manson <manson@charmed.cygnus.com> - - * config/monitor.exp(gdb_start): Look for gdb_prompt target - feature. - - * config/i960.exp: New file. - -Thu May 1 18:01:50 1997 Bob Manson <manson@charmed.cygnus.com> - - * gdb.base/funcargs.exp: Check for gdb,short_int target - feature instead of looking for explicit target triplets. - -Mon Apr 28 17:27:40 1997 Michael Snyder <msnyder@cygnus.com> - - * gdb.base/printcmds.exp: add a couple more tests a la - "p 123DEADBEEF", to check parse_number. - * top.c: change "to enable to enable" to "to enable" in a couple - of help strings. - -Thu Apr 24 14:38:18 1997 Jeffrey A Law (law@cygnus.com) - - * gdb.base/callfuncs.exp: Mark some tests as expected to fail - on the mn10300. - -Mon Apr 21 15:05:42 1997 Fred Fish <fnf@cygnus.com> - - * gdb.base/a2-run.exp: Add arm-*-coff setup_xfails for cases - where the test executable is run with explicit args. - * gdb.base/default.exp: Handle arm-*-coff case for "info float". - -Mon Apr 21 13:38:58 1997 Fred Fish <fnf@cygnus.com> - - * gdb.base/run.c: Use FAKEARGV to build test executable that - does not require a command line arg, since most simulators - don't currently support passing such an arg into the simulated - program. - * gdb.base/commands.exp: Change tests to insert the proper - value as the arg to the first recursive factorial call. Change - compilation line to define FAKEARGV at compile time. - -Wed Apr 9 11:12:36 1997 Jeffrey A Law (law@cygnus.com) - - * gdb.base/recurse.exp: Enable these tests for the mn10300. - * gdb.base/watchpoint.exp: Don't expect a failure for an "calling - function with watchpoint enabled" test. - -Tue Apr 8 19:33:20 1997 Bob Manson <manson@charmed.cygnus.com> - - * gdb.base/watchpoint.exp(test_watchpoint_triggered_in_syscall): - Don't call gdb_test when the command doesn't return to a gdb prompt. - - * lib/gdb.exp(gdb_stop_suppressing_tests): Don't print gratuitous - "Tests restarted" messages. - -Tue Apr 8 16:38:46 1997 Jeffrey A Law (law@cygnus.com) - - * gdb.disasm/mn10300.exp: Fix buglets in "other" tests. - -Thu Apr 3 15:21:26 1997 Michael Snyder <msnyder@cygnus.com> - - * gdb.base/help.exp: update help msg for INFO ADDR; add help test - for INFO SYMBOL; add help tests for OVERLAY commands. - * gdb.base/default.exp: add tests for INFO SYMBOL command; - add tests for OVERLAY commands - * gdb.base/overlays.c overlays.exp foo.c bar.c baz.c grbx.c ovlymgr.h - d10v.ld m32r.ld d10vovly.c m32rovly.c: add test case for overlays. - * gdb.base/sigall.c: add usestubs code frag - * gdb.base/watchpoint.exp: turn on complex watchpoint test for M32R. - -Thu Apr 3 09:38:53 1997 Bob Manson <manson@charmed.cygnus.com> - - * lib/gdb.exp(gdb_suppress_tests): Add explanation for subsequent - failures. - (gdb_stop_suppressing_tests): Note that tests have restarted. - -Wed Apr 2 19:04:20 1997 Bob Manson <manson@charmed.cygnus.com> - - * config/h8300.exp: New file. - -Sun Mar 30 13:38:25 1997 Bob Manson <manson@charmed.cygnus.com> - - * gdb.base/setshow.exp: Check for the existence of a - feature, not its value. - -Sat Mar 29 11:19:46 1997 Bob Manson <manson@charmed.cygnus.com> - - * gdb.c++/virtfunc.exp: Restart gdb in a sane fashion. - - * gdb.base/scope.exp: It's now init0(), not init(). - - * gdb.base/scope0.c: For now, change init() to be init0(). - - * config/monitor.exp: Use gdb_serial in preference to serial - or netport. - - * lib/gdb.exp: Set GDB to [transform gdb] if we're using a remote host - and it's not already set. - -Fri Mar 28 19:54:18 1997 Bob Manson <manson@charmed.cygnus.com> - - * gdb.base/setshow.exp: Only test the run command if the target - isn't using a stub and if it supports argument passing. - -Sat Mar 22 19:50:25 1997 Bob Manson <manson@charmed.cygnus.com> - - * config/udi.exp(gdb_start): Make sure UDICONF is set - properly before starting gdb. - -Mon Mar 24 14:40:33 1997 Jeffrey A Law (law@cygnus.com) - - * gdb.disasm/mn10300.s: New test file for mn10300 disassembler. - * gdb.disasm/mn10300.exp: Run mn10300 disassembler tests. - * gdb.disasm/Makefile.in: Remove "mn10300" when cleaning. - -Tue Mar 11 11:42:58 1997 Bob Manson <manson@charmed.cygnus.com> - - * config/vx.exp: Use remote_ld, not vxworks_ld. Don't use - specialized code to reboot the board, use remote_reboot instead. - - * config/vxworks29k.exp: Use vx.exp, not vx-gdb.exp. - - * lib/gdb.exp: Add GDB_TESTCASE_OPTIONS. - - * config/monitor.exp: Make sure we disconnect from the target. - Also, try a reboot/reload cycle instead of failing if the - load fails. - -Fri Mar 7 13:48:30 1997 Bob Manson <manson@charmed.cygnus.com> - - * gdb.base/default.exp: Don't set match_max. - * gdb.base/help.exp: Ditto. - * gdb.base/list.exp: Ditto. - * gdb.base/signals.exp: Ditto. - - * config/monitor.exp(gdb_load): If gdb,use_standard_load is - set, use remote_ld to download the testcase instead of - the GDB loader. - -Wed Mar 5 00:00:43 1997 Bob Manson <manson@charmed.cygnus.com> - - * config/vr5000.exp: New file. - - * config/monitor.exp(gdb_target_monitor): Add pattern for - "Ending remote" to detect errors in connecting. - - * gdb.base/setshow.exp: Add .* within auto language test. - - * lib/gdb.exp(gdb_run_cmd): Add check for gdb_init_command - target feature. - - * config/monitor.exp(gdb_load): Check for a failure when loading, - and reboot the board if necessary. - - * gdb.base/setvar.exp(test_set): Handle multiple prints within - a set of tests. Remove print.* from the patterns being checked. - -Mon Mar 3 11:57:43 1997 Bob Manson <manson@charmed.cygnus.com> - - * gdb.base/a1-selftest.exp: Use send_gdb consistently. Don't - refer to gdb_spawn_id. - - * config/m32r-stub.exp: Remove references to gdb_spawn_id, no - longer used. - * config/sparclet.exp: Ditto. - * config/sparclet-old.exp: Ditto. - * config/slite.exp: Ditto. - * config/sim.exp: Ditto. - * gdb.base/funcargs.exp: Ditto. - - * lib/gdb.exp:Remove references to gdb_spawn_id. - (gdb_expect): Move to remote.exp. - -Fri Feb 28 20:47:39 1997 Bob Manson <manson@charmed.cygnus.com> - - * config/monitor.exp: Detect the "Couldn't establish connection" - message from GDB. - -Tue Feb 25 14:08:55 1997 Bob Manson <manson@charmed.cygnus.com> - - * gdb.base/bitfields.exp: Use runto instead of explicit - gdb_run_cmd/gdb_expect sequences. - - * gdb.base/break.exp(text_next_with_recursion): Add match for - gdb_expect call. - - * config/monitor.exp(gdb_target_monitor): Calling exit loses big. - We also need to handle the "A program is being debugged already" - prompt from gdb. Use gdb_test to set the baud rate. - - * lib/gdb.exp(gdb_init): Increase the default expect buffer size - to 20000. Really. I mean it. - -Mon Feb 24 13:23:26 1997 Bob Manson <manson@charmed.cygnus.com> - - * lib/gdb.exp(gdb_test): Generate a FAIL message when send_gdb - fails. If suppress_flag is set, skip perror message about not - being able to send to GDB. - (send_gdb): If suppress_flag is set, don't try to send commands to - GDB. - (gdb_expect): If suppress_flag is set, always fail immediately. - (gdb_suppress_tests, gdb_stop_suppressing_tests): New functions. - (gdb_init): Call gdb_stop_suppressing_tests. - (default_gdb_exit): Ditto. - (default_gdb_start): Ditto. - - * gdb.base/bitfields.exp: Call gdb_suppress_tests and - gdb_stop_suppressing_tests as appropriate. - * gdb.base/break.exp: Ditto. - * gdb.base/callfuncs.exp: Ditto. - * gdb.base/commands.exp: Ditto. - * gdb.base/exprs.exp: Ditto. - * gdb.base/funcargs.exp: Ditto. - * gdb.base/list.exp: Ditto. - * gdb.base/recurse.exp: Ditto. - * gdb.base/scope.exp: Ditto. - * gdb.base/structs.exp: Ditto. - * gdb.c++/inherit.exp: Ditto. - -Sun Feb 23 19:56:02 1997 Bob Manson <manson@charmed.cygnus.com> - - * config/vr4300.exp: New file. - - * gdb.*/*.exp: Call gdb_expect instead of expect. - - * lib/gdb.exp(gdb_expect): New function. - -Thu Feb 20 13:57:01 1997 Bob Manson <manson@charmed.cygnus.com> - - * lib/gdb.exp(gdb_init): New function. - - * gdb.base/setvar.exp(test_set): Don't bother printing a PASS/FAIL - for each individual variable set. - - * gdb.base/exprs.exp(test_expr): Make sure each test gets a unique - name. - - * gdb.base/help.exp: Fix the syntax of a few gdb_test calls. - - * gdb.base/scope.exp: Use gdb_test. - - * gdb.base/ptype.exp: Don't call "gdb_exit; gdb_start" if we're - aborting; the testsuite driver will do that for us (see - gdb_finish). Also, use gdb_test in a few more places. - -Thu Feb 20 13:32:24 1997 Stan Shebs <shebs@andros.cygnus.com> - - * gdb.base/help.exp: Fix syntax of "help info all-registers" test. - -Thu Feb 20 10:34:21 1997 Jeffrey A Law (law@cygnus.com) - - * gdb.disasm/mn10200.s: Add "nop" after "main" so that "main" - and "add_tests" are not at the same address. - -Fri Feb 14 18:47:23 1997 Bob Manson <manson@charmed.cygnus.com> - - * gdb.base/ptype.exp: Use gdb_test. - -Thu Feb 13 16:09:36 1997 Jeffrey A Law (law@cygnus.com) - - * gdb.disasm/mn10200.s (misc_tests): Fix targets for "jsr" insns. - * gdb.disasm/mn10200.exp (misc_tests): Remove bogus line accidentally - left in. No longer expect them to fail. - - * gdb.stabs/*.mt; Deleted, no longer used. - * gdb.stabs/configure.in: Remove references to target makefile - frags. - * gdb.stabs/configure: Rebuilt. - - * gdb.disasm/*.mt: Deleted, no longer used. - * gdb.disasm/configure.in: Remove references to target makefile - frags. Use "sh3.s" as the unique filename for this directory. - * gdb.disasm/configure: Rebuilt. - - * gdb.disasm/mn10200.s: New test file for mn10200 disassembler. - * gdb.disasm/mn10200.exp: Run mn10200 disassembler tests. - * gdb.disasm/Makefile.in: Remove "mn10200" when cleaning. - -Tue Feb 11 16:57:58 1997 Bob Manson <manson@charmed.cygnus.com> - - * config/udi.exp: Use mondfe,name instead of remote_host. - -Tue Feb 11 11:22:36 1997 Jeffrey A Law (law@cygnus.com) - - * gdb.base/watchpoint.exp: Don't expect a failure when calling - a function with a watchpoint enabled on the mn10200. - - * gdb.stabs/weird.exp: Don't quit if "weird.s" doesn't exist - before trying to create it! - -Mon Feb 10 16:40:47 1997 Bob Manson <manson@charmed.cygnus.com> - - * config/vx.exp: Use hostname instead of netport. - - * config/vxworks.exp: New file. - - * gdb.base/a2-run.exp: Change vxworks cases to use gdb_spawn_id. - - * config/monitor.exp(gdb_target_monitor): Look for a prompt from - gdb before assuming everything worked. Send a ^C if a timeout - occurs. - - * lib/gdb.exp(gdb_test): Check the result of send_gdb. Use - $gdb_spawn_id directly. - (gdb_run_cmd): Try _start as well as start. Use the target feature - gdb,start_symbol as the symbol to start from when jumping. - -Mon Feb 10 11:26:59 1997 Jeffrey A Law (law@cygnus.com) - - * gdb.base/exprs.exp: Delete bogus/incorrect (and probably - redundant) test. - - * gdb.base/recurse.exp: Relax final value test for 'b' so that - it doesn't lose for 16bit integer systems. - -Fri Feb 7 09:31:21 1997 Jeffrey A Law (law@cygnus.com) - - * gdb.fortran/types.exp: If the target doesn't support "double" - data types, then expect "real" types to only be 4 bytes. - - * gdb.c++/virtfunc.exp: Expect failure for virtual function - call tests if the target doesn't support inferior function calls. - - * gdb.base/printcmds.exp: Allow minor deviation in FP values - in printf tests. - -Thu Feb 6 12:46:14 1997 Jeffrey A Law (law@cygnus.com) - - * gdb.base/help.exp: Disable "help set", "help show", and - "help support". Simplify regexp for "help stack". - - * gdb.base/default.exp: Set match_max to 5000 and the timeout - to 60 seconds. Temporarily set match_max to 15000 around the - "info copying" test. - - * gdb.base/nodebug.exp: Don't try to do an inferior function - call if the target doesn't support them. - * gdb.base/printcmds.exp: Likewise. - * gdb.base/setvar.exp: Likewise. - * gdb.base/structs.exp: Likewise. - * gdb.c++/templates.exp: Likewise. - * gdb.base/ptype.exp: Likewise. Remove UDI specific stuff. - - * gdb.base/recurse.exp: Enable for the mn10200. - - * configure.in: Do configure gdb.stabs directory for *-*-elf - targets. - * configure: Rebuilt. - - * gdb.base/break.exp: Check for gdb,noresults before testing - exit status and/or results from the target. - * gdb.base/watchpoint.exp, gdb.base/langs.exp: Likewise. - * lib/gdb.exp: Remove old (now bogus) initialization of - noinferior, noargs, noresults and nosignals. - -Tue Feb 4 21:52:17 1997 Bob Manson <manson@charmed.cygnus.com> - - * config/sh.exp: New file. - - * config/slite.exp: Try to connect multiple times to the board - before rebooting. Only send a "monitor run" if need_monitor_run - is set. - - * gdb.base/break.exp: Don't do the "stub continue" test if - the target has gdb_stub set. - - * gdb.base/callfuncs.exp: Increase the timeout. - - * gdb.base/interrupt.exp: Don't even try to compile the testcase - if the target has gdb,noinferiorio set. - - * gdb.base/list.exp: Increase match_max to 10000 characters. - - * gdb.base/sigall.exp: Check for gdb,nosignals on the target. - - * gdb.base/watchpoint.exp: Check for gdb,noinferiorio on the - target. - - * lib/gdb.exp(gdb_run_cmd): Fix for targets that use stubs. - -Mon Feb 3 12:09:37 1997 Bob Manson <manson@charmed.cygnus.com> - - * gdb.base/a1-selftest.exp: Make sure we call gdb_exit before - trying to delete the copy of gdb. Catch the file delete so we - don't die if the delete fails; also, the file should be copied to - the host, not to the build. - -Sun Feb 2 00:55:14 1997 Bob Manson <manson@charmed.cygnus.com> - - * lib/gdb.exp(gdb_test): Surround the result pattern with - parenthesis in case it contains multiple regexps separated - with |. - - * gdb.base/watchpoint.exp: Use gdb_test. - * gdb.base/default.exp: Ditto. - -Sat Feb 1 23:51:01 1997 Bob Manson <manson@charmed.cygnus.com> - - * gdb.*/*.exp: Replace $prompt with $gdb_prompt. - - * gdb.base/scope.exp: Use gdb_test. - * gdb.c++/classes.exp: Ditto. - * gdb.c++/inherit.exp: Ditto. - -Fri Jan 31 13:09:12 1997 Bob Manson <manson@charmed.cygnus.com> - - * gdb.base/crossload.exp: Don't use execute_anywhere, use - remote_exec instead. - * gdb.base/corefile.exp: Don't be ridiculous. - * gdb.base/*.c: Add missing stub invocations. - -Thu Jan 30 16:49:25 1997 Bob Manson <manson@charmed.cygnus.com> - - * config/slite.exp: Miscellaneous fixes. - - * lib/gdb.exp: Fix runto. - - * gdb.base/signals.exp: Check for a gdb,nosignals feature of - the target. - - * gdb.base/watchpoint.exp: Fix regexp. - - * lib/gdb.exp(default_gdb_exit): Add a catch to the - close and wait commands, as the descriptor may now be - invalid. Always call "remote_close host". - -Tue Jan 28 14:42:31 1997 Bob Manson <manson@charmed.cygnus.com> - - Major rewrite for testsuite revision. - - * lib/gdb.exp: Remove references to global CC, CXX, B_OPTIONS, - TARGET_INCLUDES, LDFLAGS and target_alias. Use gdb_spawn_id - instead of relying on spawn_id to always contain a valid - spawn id. - (get_compiler_info): New procedure to build the ${binfile}.ci - file, instead of replicating this in N different places. - (gdb_compile): New procedure. - - gdb.*/*.exp: Use gdb_compile and get_compiler_info (with - appropriate arguments) instead of compile. Use gdb_test in a lot - more places. Use send_gdb instead of send. Always run gdb_start - at the start of a testcase, as this is no longer done magically. - - config/*-gdb.exp: Rename without the -gdb suffix. - - config/mips.exp: Use remote_close instead of exit_remote_shell. - config/monitor.exp: Use target_info instead of looking at - baud, timeout, etc. - config/sim.exp: Use gdb_spawn_id instead of relying on spawn_id. - -Sat Dec 14 00:43:57 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.c++/templates.exp (test_ptype_of_templates), - gdb.c++/inherit.exp (test_ptype_si, test_print_anon_union): - Update expect patterns for destructors and assignment operators - to match corresponding c-typeprint.c changes. - * gdb.c++/templates.exp (test_template_breakpoints): Revert change - to destructor breakpoint test, GDB should be able to set the - destructor breakpoint without specifying arguments. - -Tue Dec 3 20:17:52 1996 Fred Fish <fnf@cygnus.com> - - * gdb.threads/pthreads.exp: Change result for failure to compile due - to lack of pthreads runtime support from an error to simply an - unsupported test, per dejagnu standards. - -Sun Dec 1 00:18:59 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * lib/gdb.exp (gdb_test): Simplify expect pattern for the case - where GDB exits to reduce pattern match time. - (skip_chill_tests): Skip chill tests for mips*-sgi-irix6*. - - * gdb.base/nodebug.exp: Add mips*-sgi-irix6* xfails. - -Tue Nov 26 18:29:23 1996 Michael Snyder <msnyder@cygnus.com> - - * gdb.base/callfuncs.exp: Turn on function call tests for h8300. - * gdb.base/default.exp: ditto. - * gdb.base/nodebug.exp: ditto. - * gdb.base/printcmds.exp: ditto. - * gdb.base/ptype.exp: ditto. - * gdb.base/setvar.exp: ditto. - * gdb.base/structs.exp: ditto. - * gdb.base/setshow.c: Guard against uninitialized values of argc. - -Tue Nov 26 17:23:28 1996 Ian Lance Taylor <ian@cygnus.com> - - * configure, */configure: Rebuild with autoconf 2.12. - -Sat Nov 23 13:32:15 1996 Fred Fish <fnf@cygnus.com> - - * gdb.base/a1-selftest.exp: Change x86 linux setup_xfails to - use new i*86-pc-linux*-gnu quads. - * gdb.base/corefile.exp: Ditto. - * gdb.base/signals.exp: Ditto. - * gdb.base/sigall.exp: Ditto. - * gdb.base/interrupt.exp: Ditto. - - * gdb.base/signals.exp (signal_tests_1): Remove setup_xfail - "i*86-*-linux" for "signal SIGUSR1". Now works, at least with - RedHat 4.0. - - * gdb.threads/pthreads.c (_MIT_POSIX_THREADS): Define if target is - linux. This allows the test case to at least compile on latest - linux, but still not run due to missing the threads runtime library. - -Fri Nov 22 10:13:29 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.base/a1-selftest.exp (do_steps_and_nexts): Reinitialize source - directory to search gdb directory. Accept and step over conditional - stack alignment code. Consume $prompt in failure cases. - Reset timeout to $oldtimeout instead of some arbitrary value. - * gdb.base/nodebug.exp: Limit backtrace to 10 frames to avoid - timeout problems with infinite stack backtraces. - * gdb.base/ptype.exp (ptype struct link, union tu_link): - Accept function parameters for linkfunc member. - -Thu Nov 21 09:17:19 1996 Fred Fish <fnf@cygnus.com> - - * lib/gdb.exp (CFLAGS): Remove, unreferenced. - (CXXFLAGS): Remove, unreferenced. - (B_OPTIONS): Add for -B options and add code to initialize with - previous -B options and also add -B option to pick up cross compiled - runtime. - (TARGET_INCLUDES): Add for -I options and add code to initialize when - doing cross compiles. - (target_alias): Declare global. - (xgcc): Set variable to full path of gcc in build tree. Use findfile - to verify that gcc exists in build tree, and if so set CC to that - gcc and to use B_OPTIONS and TARGET_INCLUDES. - -Tue Nov 12 16:20:13 1996 Fred Fish <fnf@cygnus.com> - - * gdb.c++/inherit.exp (test_print_anon_union): Reenable - ptype test for anonymous union. Fixup testcase to match - current gcc debug output. - -Mon Nov 11 14:12:06 1996 Jeffrey A Law (law@cygnus.com) - - * gdb.base/funcargs.c: Use cast rather than "UL" suffix to - force argument to an unsigned long type. - -Mon Nov 11 10:27:55 1996 Fred Fish <fnf@cygnus.com> - - * gdb.c++/inherit.exp (test_ptype_si): Fix tagless struct ptype - tests and anonymous union print/ptype tests. - * gdb.base/list.exp (test_forward-search): Increase timeout by - 5 minutes for the "search extremely long line" case. - * lib/gdb.exp (gdb_test): Document that the third arg to gdb_test is - completely optional and that the pass/fail messages use the command as - the message if that third arg is a null string. - (gdb_test_exact): Arrange that a null string pattern means match a - null string output rather than any output, which might include random - errors. - * gdb.base/mips_pro.exp: Add "mips*-sgi-irix4*" xfail for - backtrace test. - * gdb.c++/demangle.exp: Add a "*-*-*" xfail for test that was - always failing and failure is now exposed by gdb.exp changes. - -Sat Nov 9 11:13:24 1996 Fred Fish <fnf@cygnus.com> - - * gdb.c++/inherit.exp (test_ptype_vi): Log some passes that - weren't being noted. - -Sat Nov 9 01:05:10 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.base/corefile.exp: Consume $prompt in mmap fail cases. - * gdb.stabs/weird.exp: Remove v_comb xfails. - -Tue Nov 5 10:44:23 1996 Michael Snyder <msnyder@cygnus.com> - - * gdb.base/[bitfields.exp crossload.exp funcargs.exp interrupt.exp - list.exp scope.exp watchpoint.exp] - Make all timeout error msgs explicitly say "(timeout)". - -Mon Nov 4 12:03:06 1996 Michael Snyder <msnyder@cygnus.com> - - * config/monitor.exp: Increase download timeout to 1000 seconds. - -Mon Nov 4 12:02:26 1996 Michael Snyder <msnyder@cygnus.com> - - * config/m32r.exp: Increase timeout to 120 seconds. - -Sun Nov 3 14:37:05 1996 Fred Fish <fnf@cygnus.com> - - * gdb.c++/classes.exp: Modify to handle current gcc C++ member ordering - and accept older ordering as obsolescent gcc or gdb. - * gdb.c++/templates.exp: Ditto. - * gdb.c++/virtfunc.exp: Ditto. - -Fri Nov 1 11:56:09 1996 Fred Fish <fnf@cygnus.com> - - * gdb.base/coremaker.c: Add code to mmap some data so we - can check that it ends up in the core file. - * gdb.base/corefile.exp: Add test to read mmapped data - from core file. - -Wed Oct 30 18:19:16 1996 Michael Snyder <msnyder@cygnus.com> - - * config/m32r.exp: New file. - -Mon Oct 21 14:40:50 1996 Stu Grossman (grossman@critters.cygnus.com) - - * testsuite/gdb.base/nodebug.exp: Whack out -g options by hand so - that cflags can contains -gstabs, and work correctly for other tests. - -Mon Oct 21 14:00:37 1996 Michael Snyder <msnyder@cygnus.com> - - * gdb.base/setshow.exp: New file, tests show and set. - * gdb.base/setshow.c: New file, tests show and set. - * gdb.base/help.exp: Add test for help set|show annotate. - * gdb.base/default.exp: Add test for set|show annotate. - -Wed Oct 16 19:03:54 1996 Stu Grossman (grossman@critters.cygnus.com) - - * testsuite/gdb.base/break.exp: Make backtrace from factorial - errors unique. - * testsuite/gdb.base/nodebug.exp: Whack out all -g options - explicitly. - -Tue Oct 15 16:45:02 1996 Stu Grossman (grossman@critters.cygnus.com) - - * config/sim-gdb.exp (gdb_target_sim): Remove setting of height - and width commands. This is done elsewhere. - * (gdb_start): Don't call gdb_start_sim here. That's already - done in gdb_load. This fixes lots of failures in default.exp. - -Sun Oct 13 10:40:23 1996 Fred Fish <fnf@cygnus.com> - - From Peter Schauer <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE>: - * gdb.base/mips_pro.exp: Fix misplaced gdb_exit/gdb_start/gdb_load. - * lib/gdb.exp (gdb_test): Treat failures due to program exiting - in the same we we treat other failures (since it may be an expected - condition), rather than as an error. - * gdb.base/signals.exp (test_handle_all_print): Revert back to - old test format. - -Fri Oct 11 17:05:22 1996 Fred Fish <fnf@cygnus.com> - - * Makefile.in (clean mostlyclean): Also remove chill *.grt files. - (distclean maintainer-clean realclean): No need to remove files - twice. Nuke the duplicates. - * gdb.base/Makefile.in (EXECUTABLES): Add "structs". - * gdb.threads/Makefile.in (distclean maintainer-clean realclean): - Remove config.h along with other config files. - -Mon Sep 30 20:16:22 1996 Fred Fish <fnf@cygnus.com> - - * gdb.base/interrupt.exp: Add i*86-*-linux* setup_xfail for - "p func1 ()" and note that rests of tests are skipped. - * gdb.base/corefile.exp: Add i*86-*-linux* and m68*-*-hpux* - setup_xfails for "print func2::coremaker_local". - Add i*86-*-linux* setup_xfail for "backtrace in corefile.exp". - * gdb.base/mips_pro.exp: Restart gdb in this test so it isn't - affected by the previous run test. - * gdb.chill/misc.exp: Add m68*-*-hpux* setup_xfails for - "print array () ubyte (foo)" and "print/x array () byte (\$i)" - * gdb.chill/pr-8742.exp: Add m68*-*-hpux* setup_xfails for - "pass int powerset tuple" and "pass modeless int powerset tuple". - * gdb.chill/tests2.exp: Add m68*-*-hpux* setup xfails for - "real write 4" and "real write 8". - * gdb.shill/tuples.exp: Add i*86-*-linux* and m68*-*-hpux* - setup_xfails for "print vs1 after tuple assign 2", - "print \$i after tuple assign 2", and - "print vs2 after tuple assign 2". - * lib/gdb.exp (gdb_test): When a gdb aborts, print a more - meaningful error message and return -1 so the caller can - suppress further tests and avoid a cascade of errors. - -Fri Sep 27 10:34:51 1996 Fred Fish <fnf@cygnus.com> - - * gdb.base/a1-selftest.exp: Tweak tests to account for new - format for printing version. - * gdb.base/default.exp: Ditto. - * gdb.base/interrupt.exp: Fix problem with cascade of - errors if child process dies while calling a function. - -Fri Sep 13 21:43:48 1996 Fred Fish <fnf@cygnus.com> - - * Makefile.in (VPATH): Add - * Makefile.in (Makefile, config.status): Fix rules so things get - remade when necessary. - -Fri Sep 13 18:16:10 1996 Fred Fish <fnf@cygnus.com> - - * Makefile.in (just-check): Add path to sibling expect dir - to environment variable specified by RPATH_ENVVAR. - -Fri Sep 13 12:05:34 1996 Fred Fish <fnf@cygnus.com> - - * Makefile.in (RPATH_ENVVAR): New var, set to @RPATH_ENVVAR@. - (just-check): Add shared library paths for libstdc++, tk, - tcl, bfd, and opcodes to the environment variable specified - in RPATH_ENVVAR. - * configure.in: Add support to recognize --enable-shared flag - and generate correct value for RPATH_ENVVAR. - * configure: Regenerated with autoconf. - -Mon Sep 2 06:36:02 1996 Fred Fish <fnf@cygnus.com> - - * gdb.base/break.exp: Expand "Delete all breakpoints" xfail to - include all osf versions. - * gdb.threads/pthreads.exp: Expand "run to main" xfail to include - all osf versions. Add -D_MIT_POSIX_THREADS to compilation command - when target is linux. When failing to build pthreads test - executable, give more meaningful message. - * gdb.threads/pthreads.c: Hpux also uses old definition of second - arg for pthread_create. - -Mon Aug 19 09:58:59 1996 Fred Fish <fnf@cygnus.com> - - * gdb.threads/pthreads.c (PTHREAD_CREATE_ARG2, - PTHREAD_CREATE_NULL_ARG2): Accomodate old pthreads implementations. - * gdb.threads/pthreads.exp: Try linking with both -lpthread (Solaris) - and -lpthreads (everybody else). - (test_startup): Fail gracefully if threads are not supported. - * gdb.base/nodebug.exp: Add setup_xfail hppa*-*-hpux* for - "p/c array_index("abcdef",2)" when not gcc compiled. - * gdb.base/corefile.exp: Add setup_xfail hppa*-*-hpux* for - "print func2::coremaker_local" when not gcc compiled. - * gdb.base/opaque.exp: Remove setup_xfail hppa*-*-hpux* for - "ptype on opaque struct tagname (statically)", - "ptype on opaque struct tagname (dynamically) 1", and - "ptype on opaque struct tagname (dynamically) 2" - for not compiled with gcc. - * gdb.base/mips_pro.exp: Only do setup_xfail hppa*-*-* for - backtrace when compiled with gcc. - * lib/gdb.exp (runto_main): Return result of "runto main" rather - than always return success. - -Sat Aug 17 13:28:00 1996 Fred Fish <fnf@cygnus.com> - - * gdb.c++/virtfunc.exp: Remove setup_xfail for "mips-*-irix5*". - -Tue Aug 13 10:26:10 1996 Jeffrey A Law (law@cygnus.com) - - * gdb.base/structs.exp: Undo last change. - -Mon Aug 12 15:29:08 1996 Fred Fish <fnf@cygnus.com> - - * gdb.base/a1-selftest.exp (do_steps_and_nexts): New routine to - encapsulate all the steps/nexts done during self test, starting - at main, and makes them less sensitive to optimization issues. - Add "hppa*-*-hpux*" to setup_xfail for "backtrace through - signal handler" test. - * gdb.threads/pthreads.exp: Only run this for native configs. - * gdb.base/structs.exp (do_function_calls): Add hppa*-*-hpux9*" - setup_xfails for "p fun5()", "p fun6()", "p fun7()", and "p fun8" - tests. - gdb.c++/virtfunc.exp (do_tests): Add "mips-*-irix5*" setup_xfail - for "runto test_calls(void)" test. - -Sun Aug 11 13:11:24 1996 Fred Fish <fnf@cygnus.com> - - * gdb.base/term.exp: Set 7-bit strings, address off, width to 0, - and don't expect address info in breakpoint confirmations. - -Wed Aug 7 20:47:43 1996 Fred Fish <fnf@cygnus.com> - - * gdb.base/list.exp (test_forward_search): Increase timeout - temporarily by 60 seconds for searching extremely long line, - and then reset to old value when done. Increase expect input - buffer to 10000. - -Wed Aug 7 15:34:22 1996 Fred Fish <fnf@cygnus.com> - - * gdb.base/list.exp (test_forward_search): Fix to handle very - long source line without overflowing expect's input buffer. - -Wed Aug 7 12:03:25 1996 Tom Tromey <tromey@creche.cygnus.com> - - * config/slite-gdb.exp (gdb_start): Use "full_buffer", not - "buffer_full". - - * config/nind-gdb.exp (gdb_start): Use "full_buffer", not - "buffer_full". - - * config/mips-gdb.exp (gdb_start): Use "full_buffer", not - "buffer_full". - - * lib/gdb.exp (gdb_test): Correct pattern is "full_buffer", not - "buffer_full". - -Wed Aug 7 11:05:47 1996 Fred Fish <fnf@cygnus.com> - - * configure.in (configdirs): Add gdb.threads. - * configure: Regenerated with autoconf. - * gdb.threads/{config.in, pthreads.c, pthreads.exp}: New. - * gdb.threads/{Makefile.in, configure.in}: Complete rewrites. - * gdb.threads/configure: New, generated with autoconf. - -Tue Aug 6 10:23:04 1996 Tom Tromey <tromey@rtl.cygnus.com> - - * lib/gdb.exp (gdb_test_exact): Turn \n in pattern into \r\n. - -Mon Aug 5 18:11:53 1996 Fred Fish <fnf@cygnus.com> - - * gdb.base/signals.exp (test_handle_all_print): Test separately for - each signal's status in the output of "handle all print". - * lib/gdb.exp (gdb_test): Document that the pattern must NOT include - the \r\n sequence that immediately precedes the gdb prompt. - * gdb.base/a1-selftest.exp: Save original timeout and restore - after test. - -Sun Aug 4 10:20:50 1996 Jeffrey A Law (law@cygnus.com) - - * gdb.disasm/hppa.s: Export fmemLRbug_tests_4 as a ST_CODE - symbol. - -Fri Aug 2 17:37:26 1996 Brendan Kehoe <brendan@lisa.cygnus.com> - - * config/vx-gdb.exp (gdb_start): Fix syntax of `$shell_id < 0'. - -Thu Jun 27 20:41:40 1996 Fred Fish <fnf@cygnus.com> - - * gdb.base/signals.exp (test_handle_all_print): Temporarily increase - timeout by 60 seconds. - -Thu Jun 27 18:13:57 1996 Fred Fish <fnf@cygnus.com> - - * config/unix-gdb.exp: Increase default timeout from 30 to 60 sec. - * config/netware.exp (gdb_run_cmd): Restore old timeout before doing - error return. - -Thu Jun 27 10:54:58 1996 Fred Fish <fnf@cygnus.com> - - * lib/gdb.exp (default_gdb_start): When reporting a timeout during - gdb initialization, also report how long dejagnu waited. Restore - old timeout before doing error return. Temporarily increase timeout - by 3 minutes to allow for slow startups over heavy NFS use. - -Tue Jun 25 19:59:17 1996 Fred Fish <fnf@cygnus.com> - - * lib/gdb.exp: Report timeout value for verbosity level 2. - * config/gdbserver.exp: Ditto. - * config/hppro.exp: Ditto. - * config/mips-gdb.exp: Ditto. - * config/monitor.exp: Ditto. - * config/netware.exp: Ditto. - * config/sim-gdb.exp: Ditto. - * config/slite-gdb.exp: Ditto. - * config/udi-gdb.exp: Ditto. - * config/unix-gdb.exp: Ditto. - * config/vx-gdb.exp: Ditto. - * gdb.base/a1-selftest.exp: Ditto. - * gdb.base/a2-run.exp: Ditto. - * gdb.base/break.exp: Ditto. - * gdb.base/corefile.exp: Ditto. - * gdb.base/list.exp: Ditto. - * gdb.base/recurse.exp: Ditto. - * gdb.base/scope.exp: Ditto. - * gdb.base/signals.exp: Ditto. - -Tue Jun 25 23:16:58 1996 Jason Molenda (crash@godzilla.cygnus.co.jp) - - * gdb.threads/Makefile.in (docdir): Removed. - -Tue Jun 25 17:02:39 1996 Jason Molenda (crash@godzilla.cygnus.co.jp) - - * configure.in (AC_PREREQ): autoconf 2.5 or higher. - * gdb.{base,c++,chill,disasm,stabs}/Makefile.in (VPATH): set to - @srcdir@. - * gdb.{base,c++,chill,disasm,stabs}/configure.in (AC_PREREQ): - autoconf 2.5 or higher. - * gdb.{base,c++,chill,disasm,stabs}/configure: Rebuilt. - -Thu Jun 13 11:16:10 1996 Tom Tromey <tromey@thepub.cygnus.com> - - * configure: Regenerated. - * aclocal.m4 (CY_AC_PATH_TCLH, CY_AC_PATH_TKH): Use odd names to - avoid name clashes with SunOS headers. - -Wed Jun 5 16:43:27 1996 Jeffrey A Law (law@cygnus.com) - - * gdb.c++/virtfunc.exp: Search $objdir/../../libstdc++ for libstdc++. - -Thu May 30 11:35:11 1996 Jeffrey A Law (law@cygnus.com) - - * gdb.base/callfuncs.exp: Finish last change -- make sure the - prototype information ends up in the compiler info file. - -Thu May 23 12:48:41 1996 Fred Fish <fnf@cygnus.com> - - * gdb.base/callfuncs.exp: Remove the compiler info file prior to - attempting to regenerate it. Eliminate use of a temporary file - and just generate the info file directly. Source it immediately, - for consistency of use. - * gdb.base/corefile.exp: Ditto - * gdb.base/exprs.exp: Ditto. - * gdb.base/funcargs.exp: Ditto. - * gdb.base/langs.exp: Ditto. - * gdb.base/list.exp: Ditto. - * gdb.base/mips_pro.exp: Ditto. - * gdb.base/nodebug.exp: Ditto. - * gdb.base/opaque.exp: Ditto. - * gdb.base/ptype.exp: Ditto. - * gdb.base/scope.exp: Ditto. - * gdb.base/setvar.exp: Ditto. - * gdb.base/signals.exp: Ditto. - * gdb.base/whatis.exp: Ditto. - * gdb.c++/templates.exp: Ditto. - * gdb.c++/virtfunc.exp: Ditto. - * gdb.c++/virtfunc.exp: Use contents of gcc_compiled to decide - whether or not to add -lstdc++ to the compile command line args. - -Sat May 18 02:43:58 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.base/recurse.exp: Remove setup_xfail for "sparc*-*-sunos4*", - it got fixed by the recent lookup_minimal_symbol_by_pc change. - Increase timeout, a lot of single stepping might be needed if the - target has no hardware watchpoints. - -Wed May 15 08:47:42 1996 Jeffrey A Law (law@cygnus.com) - - * gdb.base/break.exp: Ignore compiler warnings when compiling - break.c. - * gdb.base/callfuncs.exp: Don't run these tests on the h8300. - * gdb.base/default.exp: Add h8300 xfails. Handle messages - from remote-sim. - * gdb.base/exprs.exp: Add h8300 xfails. - * gdb.base/funcargs.exp: Likewise. - * gdb.base/nodebug.exp: Likewise. - * gdb.base/printcmds.exp: Likewise. - * gdb.base/ptype.exp: Likewise. - * gdb.base/setvar.exp: Handle sizeof (int) != 4 for h8300. Add - h8300 xfails. - * gdb.base/return.exp: Handle float/double precision problems - on the h8300. - * gdb.base/funcargs.c: Explicitly make last constant argument to - call_after_alloca_subr an unsigned long type. - * gdb.base/return.c: Include stdio.h. - -Tue May 7 22:01:12 1996 Rob Savoye <rob@chinadoll.cygnus.com> - - * config/abug.exp: New file for the older Motorola Bug monitor - that runs on the mvme13x series VME boards. - * config/monitor.exp: Use the new config array for target settings - if they exist. - -Fri May 3 16:02:55 1996 Stan Shebs <shebs@andros.cygnus.com> - - * sim-gdb.exp: Make the SH simulator allocate less space when - it is targeted. - -Thu May 2 12:31:56 1996 Jeffrey A Law (law@cygnus.com) - - * gdb.base/mips_pro.exp: Expect failure for hppa*-*-* in backtrace - test. - -Wed Mar 20 08:48:03 1996 Fred Fish <fnf@cygnus.com> - - * gdb.base/list.exp (test_list_function): Remove setup_xfail for - "rs6000-*-*" for "list function in include file" when gcc compiled. - * gdb.base/printcmds.exp: Remove setup_xfail for "rs6000-*-aix*" - for "p ctable1[120]". - * gdb.base/scope.exp: Remove setup_xfail for "rs6000-*-*" for - "print 'scope0.c'::filelocal_bss before run" when gcc compiled. - Remove setup_xfail for "rs6000-*-*" for - "print 'scope0.c'::filelocal before run". - * gdb.base/{langs.exp, lists.exp, opaque.exp, scope.exp}, - gdb.stabs/weird.exp: Remove use of compiler options "-c -o ..." - since some compilers don't allow both options to be given - on the same command line. Create object file and move it. - -Tue Mar 19 23:49:31 1996 Fred Fish <fnf@cygnus.com> - - * gdb.base/corefile.exp: Always regenerate the core file, since - we always regenerate the coremaker program. Detect special case - where registers cannot be read from core file. - -Tue Mar 19 16:52:49 1996 Fred Fish <fnf@cygnus.com> - - From Peter Schauer <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE> - * gdb.base/funcargs.c: Patch for SPARCworks alloca compatibility - * gdb.c++/templates.exp: Only match on basename of file since - some formats like xcoff don't encode directory information. - * gdb.stabs/weird.exp: Use the right sed script for powerpc - and rs6000 AIX xcoff targets. - * configure.in: Add stabsdirs to configdirs for powerpc-*-aix*. - * configure: Regenerate. - * gdb.base/Makefile.in (clean): Remove generated file twice-tmp.c - here, rather than in distclean. - -Sun Mar 17 13:35:31 1996 Fred Fish <fnf@cygnus.com> - - * gdb.base/mips_pro.exp: Create mips_pro.ci to get gcc_compiled - defined, and use it to compile the test case with -O2. The - native compilation still uses no optimization. - * gdb.base/mips_pro.c: Remove inline assembly code since - it is compiled PIC by default, which results in assembler - warnings that make the testsuite think the compilation - was unsuccessful. - -Sat Mar 16 15:02:24 1996 Fred Fish <fnf@cygnus.com> - - * gdb.c++/misc.exp: Add note to message for - "print s.a for foo struct" that this is a known gcc 2.7.2 - and earlier bug. - -Fri Mar 15 17:49:57 1996 Fred Fish (fnf@cygnus.com) - - * gdb.base/break.exp: Fix pattern for matching "Delete all - breakpoints (y or n) ". Add "mips-dec-ultrix*" to - setup_xfail for deleting all breakpoints test. Fix various - timeout messages to include "(timeout)". - * gdb.base/callfuncs.exp: Add "i*86-*-sysv4*" to setup_xfail - for "p t_float_values2(3.14159,float_val2)". - * gdb.base/funcargs.exp: Remove "mips-sgi-irix4*" setup_xfail - for "continue to call2g" when gcc compiled. - * gdb.base/langs.exp: Remove "i*86-*-sysv4*" setup_xfail for - "up to foo in langs.exp", "show language at foo in langs.exp", - "show language at cppsub_ in langs.exp", "up to fsub in langs.exp", - and "show language at fsub in langs.exp". - * gdb.base/list.exp: Remove "*-*-sysv4*" setup_xfail for - "list line 1 in include file", "list message for lines past EOF", - "list function in include file", "list list0.h:foo", and - "list filename:function; nonexistant function". - * gdb.base/ptype.exp: Change "i*86-*-sysv4*" setup_xfail for - "whatis unnamed typedef'd enum (compiler bug in IBM's xlc)" - and "ptype t_char_array" to be for native cc only. - -Fri Mar 15 16:17:22 1996 Fred Fish <fnf@cygnus.com> - - * gdb.base/corefile.exp: Remove "alpha-dec-osf2*" native compiled - setup_xfail for "print coremaker_bss", "print coremaker_ro", - "print func2::coremaker_local", and "backtrace in corefile.exp". - -Wed Mar 13 14:54:11 1996 Fred Fish <fnf@cygnus.com> - - * gdb.base/signals.exp: Remove "alpha-*-osf2*" setup_xfail for - "bt in signals.exp". This problem only appears when running - the testsuite, and then only intermittently. - -Tue Mar 12 15:00:16 1996 Stan Shebs <shebs@andros.cygnus.com> - - * gdb.base/return.exp (return_tests): Differentiate between - two tests of continuing. - -Tue Mar 5 14:33:33 1996 Stan Shebs <shebs@andros.cygnus.com> - - * */Makefile.in (maintainer-clean): Remove config.log. - * gdb.base/Makefile.in (EXECUTABLES): Replace twice with twice-tmp. - * gdb.c++/Makefile.in (PROGS): Add inherit. - (clean): Remove *.ci. - -Tue Feb 20 16:36:10 1996 Fred Fish <fnf@cygnus.com> - - * gdb.c++/misc.cc: Add test code from Mike Stump. - * gdb.c++/misc.exp: Add test to print s.a, for Mike Stump. - -Sun Feb 18 11:39:12 1996 Fred Fish <fnf@cygnus.com> - - * gdb.base/signals.exp: Change setup_xfail for "alpha-*-osf2" - to "alpha-*-osf2*" and add comment. - * gdb.base/a1-selftest.exp (test_with_self): Remove "alpha-dec-osf2*" - setup_xfail for "step over execarg initialization" and - "step over corearg initialization". - * gdb.base/callfuncs.exp (do_function_calls): Restore setup_xfail - for "hppa*-*-*", "sparc-*-*", "mips*-*-*", and "alpha-dec-osf2*". - * gdb.base/corefile.exp: Add "alpha-dec-osf2*" setup_xfail when not - gcc compiled for "print coremaker_bss", "print coremaker_ro", - "print func2::coremaker_local", and "backtrace in corefile.exp". - * gdb.base/signals.exp: Build and source signals.ci. - Change "alpha-dec-osf2*" setup_xfail for "bt in signals.exp" - to be for gcc only. - * lib/gdb.exp: Move verbose statements outside conditionals. - -Sat Feb 17 02:22:14 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.base/sigall.exp: Remove setup_xfail for irix4. Fixed by - Feb 3 procfs.c change. - -Fri Feb 16 13:25:31 1996 Fred Fish <fnf@cygnus.com> - - * config/unix-gdb.exp: Remove extraneous newlines from end of file. - -Thu Feb 15 08:12:55 1996 Fred Fish <fnf@cygnus.com> - - * config/unix-gdb.exp: Default timeout in UNIX case to 30 seconds, up - from dejagnu's apparent default of 10 seconds, which gives random - results when running the tests over NFS on moderately loaded systems. - * lib/gdb.exp (gdb_run_cmd): Add "(timeout)" in timeout case. - -Mon Feb 12 16:50:28 1996 Fred Fish <fnf@cygnus.com> - - * gdb.base/callfuncs.exp: Remove setup_xfail for PR 5318. Now fixed. - * gdb.base/a2-run.exp: Replace $binfile with $testfile in test - result reports. - -Fri Feb 9 15:56:51 1996 Fred Fish <fnf@cygnus.com> - - * configure.in (CY_AC_PATH_TCLH): Remove. - * configure: Regenerate. - -Fri Feb 9 08:21:31 1996 Fred Fish <fnf@cygnus.com> - - * gdb.c++/Makefile.in (clean): Add missing '{'. - -Fri Feb 2 10:19:40 1996 Jeffrey A Law (law@cygnus.com) - - * lib/gdb.exp: Provide a default value for noinferior. - - * lib/gdb.exp: Fix typos (LDLAGS -> LDFLAGS). - Load libgloss.exp. - -Thu Feb 1 20:20:14 1996 Jeffrey A Law (law@cygnus.com) - - * gdb.disasm/hppa.exp: Compile directly into an executable, use - the executable, not the .o to run the tests from. - -Wed Jan 31 14:21:09 1996 Jeffrey A Law (law@cygnus.com) - - * gdb.base/break.exp: Don't test for program exit or exit status - if $noresults if nonzero. - * gdb.base/langs.exp: Likewise. - * gdb.base/watchpoint.exp: Likewise. - - * gdb.base/default.exp: Remove extraneous call to load gdb.exp. - * gdb.chill/pr-8405.exp: Move skip_chill_tests check to just before - trying to compile the testcase. - -Wed Jan 24 23:42:39 1996 Doug Evans <dje@charmed.cygnus.com> - - * gdb.base/interrupt.exp (p func1): xfail sparc64-*-solaris2. - * gdb.base/signals.exp (continue to handler): Likewise. - -Tue Jan 23 16:28:22 1996 Per Bothner <bothner@kalessin.cygnus.com> - - * gdb.c++/classes.exp: Now = returns false/true, not 1/0. - - * gdb.fortran/exprs.exp: .LT. and .GT. now return .TRUE. or .FALSE.. - -Tue Jan 23 15:41:57 1996 Jeffrey A Law (law@cygnus.com) - - * gdb.base/corefile.exp: Recognize "not found" as failure - when trying to determine if a core file was generated. - If no core file was generate the first time, try again without - the ulimit -c to work around braindamaged shells. - -Mon Jan 15 09:33:00 1996 Fred Fish <fnf@cygnus.com> - - * gdb.stabs/configure.in (alpha-*-*,mips-*-*): Replace - [] tests with "test" and enclose string in quotes. - * gdb.stabs/configure: Rebuild - -Thu Jan 11 09:43:14 1996 Tom Tromey <tromey@creche.cygnus.com> - - Changes in sync with expect: - * aclocal.m4 (CY_AC_PATH_TCLH): Handle Tcl 7.5 and greater. - (CY_AC_PATH_TCLLIB): Handle Tcl 7.5 and greater. - (CY_AC_PATH_TKH): Handle Tk 4.1 and greater. - (CY_AC_PATH_TKLIB): Handle Tk 4.1 and greater. Properly quote - argument to AC_REQUIRE. - * configure: Regenerated. - -Thu Jan 4 08:17:22 1996 Fred Fish <fnf@cygnus.com> - - * gdb.base/corefile.exp: When generating a core, discard any - error messages about ulimit not found and the "core dumped" - message from the shell that runs the coredumper. - -Wed Jan 3 01:30:41 1996 Jeffrey A Law (law@cygnus.com) - - * lib/gdb.exp (skip_chill_tests): Skip them on the PA too. - - * gdb.stabs/weird.exp: Use ${target_triplet} to determine - which sed script to run. Expect failure for v_comb test - on PA targets too. - -Sat Dec 30 16:09:04 1995 Fred Fish <fnf@rtl.cygnus.com> - - * gdb.base/corefile.exp: Remove "i*86-*-linux" xfail for - "print func2::coremaker_local" and for "backtrace in corefile.exp" - -Sat Dec 30 12:59:12 1995 Fred Fish <fnf@cygnus.com> - - * lib/gdb.exp: Fix typo and rewrite skip_chill_tests. - * gdb.stabs/weird.exp: Setup "sparc-sun-sunos4*" and - "sparc-sun-solaris*" xfails for "p v_comb". - * lib/gdb.exp (default_gdb_start): Fix typo. - * gdb.base/corefile.exp: Allow "Core was generated by ..." - messages to not include the full program name that caused - the core dump since some systems (such as solaris) apparently - truncate this path to about 80 characters. - When generating a core file first try increasing the core file - size limit to unlimited since some systems may default it to - zero, and it is harmless to try it. Move the test for failing - to generate a core file to where it will actually get executed. - * gdb.c++/templates.exp (test_ptype_of_templates): Accept - new gdb result from g++ debug info improvements and make old - pattern obsolescent. Also account for size_t differences - (may be int or long). - * gdb.base/a1-selftest.exp (test_with_self): Check for case where - initialization before function call is placed in the delay slot - and thus appears to be skipped over by commands such as "next". - -Fri Dec 29 16:09:20 1995 Stan Shebs <shebs@andros.cygnus.com> - - * gdb.base/a1-selftest.exp (test_with_self): Run without windows. - -Wed Dec 6 10:45:42 1995 Jeffrey A. Law <law@sethra.cygnus.com> - - * gdb.base/*.exp: Make ${srcfile} only be the basename of the - input source file; fix code to compile test to deal with this - convention. - * gdb.c++/*.exp: Likewise. - -Mon Nov 27 11:40:16 1995 Fred Fish <fnf@cygnus.com> - - * gdb.base/signals.exp: Setup "alpha-*-osf2*" xfail for - "bt in signals.exp". - -Sat Nov 25 20:52:15 1995 Fred Fish <fnf@phydeaux.cygnus.com> - - * gdb.base/a1-selftest.exp: Add alpha-dec-osf2 setup_xfail for - "step over execarg initialization" and - "step over corearg initialization". - -Sat Nov 25 18:20:14 1995 Fred Fish <fnf@cygnus.com> - - * gdb.base/ptype.c (main): Declare malloc as a "char *" for systems - with sizeof(pointer) > sizeof(int). Avoid "void *" or include files. - -Sat Nov 25 11:03:42 1995 Fred Fish <fnf@cygnus.com> - - From Rob Savoye (rob@poseidon.cygnus.com) - * Makefile.in, configure.in, gdb.base/{Makefile.in, configure.in}, - gdb.c++/{Makefile.in, configure.in}, gdb.chill/{Makefile.in, - configure.in}, gdb.disasm/{Makefile.in, configure.in}, - gdb.stabs/{Makefile.in, configure.in}, gdb.threads/{Makefile.in, - configure.in}: Major reworking for autoconfig. - * aclocal.m4, configure, gdb.base/configure, gdb.c++/configure, - gdb.disasm/configure, gdb.stabs/configure, gdb.stabs/default.mt : - New files. - * config/unix-gdb.exp: Make GDB global. - * gdb.base/{a1-selftest.exp, a2-run.exp,bitfields.exp, break.exp, - callfuncs.exp, commands.exp, corefile.exp, crossload.exp, exprs.exp, - funcargs.exp, interrupt.exp, langs.exp, list.exp, mips_pro.exp, - nodebug.exp, opaque.exp, printcmds.exp, ptype.exp, recurse.exp, - regs.exp, return.exp, scope.exp, setvar.exp, sigall.exp, signals.exp, - term.exp, twice.exp, watchpoint.exp, whatis.exp}, - gdb.c++/{classes.exp, callfuncs.exp, inherit.exp, misc.exp, - templates.exp, virtfunc.exp}, gdb.chill/{callch.exp, chillvars.exp, - misc.exp, pr-4975.exp, pr-5016.exp, pr-5020.exp, pr-5022.exp, - pr-5646.exp, pr-5984.exp, pr-6292.exp, pr-6632.exp, pr-8134.exp, - pr-8136.exp, result.exp, string.exp, tuples.exp}, - gdb.disasm/{hppa.exp, sh3.exp}, gdb.stabs/weird.exp: Change continues - to returns as necessary, arrange for test to compile own testcase - executable. - * lib/gdb.exp: Changes for testsuite to compile own test cases. - -Tue Nov 21 16:15:45 1995 Fred Fish <fnf@cygnus.com> - - * gdb.c++/classes.exp (test_pointers_to_class_members): Add - clear_xfail at end of test which might not call either pass or fail. - * gdb.base/a1-selftest.exp: Add i*86-*-linuxaout xfail for - "backtrace through signal handler". - -Sat Nov 18 04:09:31 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.base/sigall.exp: Work around OSF/1-3.x kernel bug when - continuing from a job control stop signal. - * gdb.stabs/alpha.mt: Use $(CFLAGS) when building weird.o. - -Wed Nov 15 00:28:03 1995 Jeffrey A Law (law@cygnus.com) - - * gdb.base/callfuncs.exp: Remove bogus hppa xfails. - * gdb.base/corefile.exp: Likewise. - * gdb.base/funcargs.exp: Likewise. - -Tue Nov 14 15:18:10 1995 Stu Grossman (grossman@cygnus.com) - - * config/hmsirom.exp: Setup for talking to hmsi ROM monitor. - * config/monitor.exp: Add support for setting baud rate. - -Sat Nov 4 15:35:52 1995 Fred Fish <fnf@cygnus.com> - - * gdb.base/a1-selftest.exp: Remove i*86-*-sysv4* and - i*86-*-linux* xfails for "backtrace through signal handler". - * gdb.base/corefile.exp: Add i*86-*-sysv4* xfail for - "print func2::coremaker_local". - * gdb.base/break.exp: Add i*86-*-sysv4*, sparc-sun-sunos4, - alpha-dec-osf2* xfail for - "delete all breakpoints when none". - -Wed Nov 1 15:57:16 1995 Fred Fish <fnf@cygnus.com> - - * gdb.base/break.exp: Change test that deletes all breakpoints - when no user breakpoints are installed. A post 4.15 change - causes gdb to no longer prompt in this case. - -Tue Oct 31 15:13:43 1995 Fred Fish <fnf@cygnus.com> - - * gdb.base/return.exp (return_tests): Change xfail for test - "correct value returned double test" to stop xfailing at - Solaris 2.5. Apparently the bug has been fixed. - -Sun Oct 29 12:18:16 1995 Fred Fish <fnf@cygnus.com> - - * gdb.stabs/ecoff.sed: Remove comment lines except for first one. - IRIX 4.0 /bin/sed chokes on them, though they work fine elsewhere. - -Tue Oct 24 11:12:12 1995 Jeffrey A Law (law@cygnus.com) - - * gdb.disasm/hppa.exp: Test lci and syncdma instructions. - * gdb.disasm/hppa.s: Corresponding changes. - -Wed Oct 18 11:27:47 1995 Jeffrey A Law (law@cygnus.com) - - * gdb.base/configure.in (hppa*-*-hpux*): No longer needs target - makefile fragment. - * config/mt-hpux: Deleted. - -Tue Oct 17 23:02:12 1995 Jeffrey A Law (law@cygnus.com) - - * Many files: When warning about suppressed tests due to a - nonexistant test binary, avoid incrementing the warning count. - -Tue Oct 10 11:00:41 1995 Fred Fish <fnf@cygnus.com> - - * Makefile.in (TARGET_FLAGS_TO_PASS): Remove BISON. - -Sun Oct 8 04:23:14 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.base/return.exp: Change xfail from "sparc-*-solaris2.*" to - "sparc-*-solaris2*". - -Sat Sep 23 01:22:23 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.base/coremaker.c: Produce a full core dump for AIX targets. - Add global and local variables and initialize them. - * gdb.base/corefile.exp: Test correct mapping of corefile sections - by printing variables. Remove rs6000 and powerpc xfails, BFD now - extracts the file name and terminating signal from the core file. - * TODO: Remove note about tests for correct mapping of corefile. - * gdb.base/ptype.c (main): Use boolean2 to inhibit AIX 4.1 xlc - from optimizing it away. - * gdb.stabs/weird.exp: Remove rs6000 xfail, xcoffread.c now - handles common blocks. - -Thu Sep 21 01:28:10 1995 Jeff Law (law@snake.cs.utah.edu) - - * gdb.disasm/sh3.s (fmac): Update for new assembler syntax - * gdb.disasm/sh3.exp (fmac): Corresponding changes. - -Wed Sep 20 13:15:05 1995 Ian Lance Taylor <ian@cygnus.com> - - * Makefile.in (maintainer-clean): New target, synonym for - realclean. - * gdb.base/Makefile.in (maintainer-clean): Likewise. - * gdb.c++/Makefile.in (maintainer-clean): Likewise. - * gdb.chill/Makefile.in (maintainer-clean): Likewise. - * gdb.disasm/Makefile.in (maintainer-clean): Likewise. - * gdb.stabs/Makefile.in (maintainer-clean): Likewise. - * gdb.threads/Makefile.in (maintainer-clean): Likewise. - -Sun Sep 10 13:14:01 1995 Fred Fish <fnf@cygnus.com> - - * gdb.base/scope.exp (text_at_main): Add "hppa*-*-hpux*" - xfails when not gcc compiled for "print foo::funclocal". - (test_at_foo): Add "hppa*-*-hpux*" xfails when not gcc compiled for: - "print foo::funclocal at foo", - "print 'scope1.c'::foo::funclocal at foo", - "print foo::funclocal_bss at foo", - "print 'scope1.c'::foo::funclocal_bss at foo", - "print foo::funclocal_ro at foo", - "print 'scope1.c'::foo::funclocal_ro at foo", - "print bar::funclocal at foo" and - "print 'scope1.c'::bar::funclocal at foo". - (test_at_bar): Add "hppa*-*-hpux*" xfails when not - gcc compiled for "print foo::funclocal at bar". - Expand all messages to ensure that they identify that - the test is at bar(). - * gdb.base/opaque.exp: Add "hppa*-*-hpux*" xfails when not - gcc compiled for: - "ptype on opaque struct pointer (statically)", - "ptype on opaque struct tagname (statically)", - "ptype on opaque struct pointer (dynamically) 1", - "ptype on opaque struct tagname (dynamically) 1", - "ptype on opaque struct pointer (dynamically) 2" and - "ptype on opaque struct tagname (dynamically) 2 - * gdb.base/nodebug.exp: Add "hppa*-*-hpux*" xfails when not - gcc compiled for: - "p datalocal" - "whatis datalocal", - "ptype datalocal", - "p bsslocal", - "whatis bsslocal", and - "ptype bsslocal". - * gdb.base/langs.exp: Add "hppa*-*-hpux*" xfails for - "backtrace in langs.exp" and "up to langs0__2do in langs.exp" - when not gcc compiled. - * gdb.base/funcargs.exp (float_and_integral_args): Add - "hppa*-*-hpux*" xfail for "run to call2a" when not gcc - compiled. - (discard_and_shuffle): Add "hppa*-*-hpux*" xfail for - "backtrace from call6a" when not gcc compiled. - (shuffle_round_robin): Add "hppa*-*-hpux*" xfail for - "backtrace from call7a" when not gcc compiled. - * gdb.base/callfuncs.exp (do_function_calls): - Add "hppa*-*-hpux*" xfail when not gcc compiled for - "p t_char_array_values(char_array_val2,char_array_val1)", - "p t_char_array_values(char_array_val1,char_array_val2)", - "p t_char_array_values("carray 1","carray 2")", - "p t_char_array_values("carray 1",char_array_val2)", - "p t_char_array_values(char_array_val1,"carray 2")", - "p sum_args(1,{2})", - "p sum_args(2,{2,3})", - "p sum_args(3,{2,3,4})", - "p sum_args(4,{2,3,4,5})" - * gdb.base/corefile.exp: Add "hppa*-*-hpux*" xfail for - "backtrace in corefile.exp" when not gcc compiled. - -Sat Sep 9 01:35:39 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.base/signals.exp: Rewrite `handle all print' test as - a procedure. Accept blanks or TABs as whitespace, increase - timeout and expect input buffer size for the large output - from the command. Remove "i*86-*-bsdi2.0" xfail. - -Sat Sep 2 06:41:26 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.base/setvar.exp: Add new testcases for truncation when - assigning invalid values to bitfields. - -Sat Sep 2 00:17:31 1995 Fred Fish <fnf@cygnus.com> - - * gdb.base/callfuncs.exp (do_function_calls): Remove - mips-sgi-irix* xfail for - "call inferior func with struct - returns char *" - and fix test so that an optional (unsigned char *) cast is - accepted in the result. - -Fri Sep 1 13:42:01 1995 Fred Fish <fnf@cygnus.com> - - * gdb.base/funcargs.exp (float_and_integral_args): Remove - sparc-sun-solaris2* xfail for "print f1 after run to call2a". - * gdb.c++/Makefile.in (SUFFIXES): Add .SUFFIXES and ".cc" suffix. - * gdb.base/signals.exp: Remove duplicate "handle all print" test - that accidentally got checked in. - -Sun Aug 27 23:35:35 1995 Fred Fish <fnf@cygnus.com> - - * gdb.base/callfuncs.exp (do_function_calls): Add alpha-dec-osf2* - clear_xfail for "p t_float_values2(3.14159,float_val2)" for gcc - compiled test. - * gdb.base/opaque.exp (setup_xfail_on_opaque_pointer): - Add mips-sgi-irix5* xfail for not gcc compiled. - * gdb.base/Makefile.in (nodebug.o): Also create nodebug.ci. - * gdb.base/nodebug.exp: Add mips-sgi-irix5 xfail when not gcc compiled for - "p top", "whatis top", "p middle", and "whatis middle". - * gdb.base/whatis.exp: Add mips-sgi-irix* xfail for - "whatis signed char" for not gcc compiled. - * gdb.base/setvar.exp: Add mips-sgi-irix4* xfail (works on irix5) for - "set variable signed char=-1 (-1)" and - "set variable signed char=0xFF (0xFF)" for not gcc compiled. - * gdb.base/funcargs.exp (float_and_integral_args): - Add mips-sgi-irix5* xfail for "run to call2a" for not gcc compiled. - Add mips-sgi-irix* xfail when not gcc compiled for - "continue to call2b". - Add mips-sgi-irix4* xfail (works with irix5) when gcc compiled for - "continue to call2g". - (discard_and_shuffle): Add mips-sgi-irix5* xfail whn not gcc compiled for - "backtrace from call6a" - (shuffle_round_robin): Add mips-sgi-irix* xfail when not gcc compiled for - "backtrace from call7k". - Add mips-sgi-irix5* xfail when not gcc compiled for - "backtrace from call7a". - (localvars_after_alloca): Fix gdb_test cmds for - "print * after runto ...". - Remove rs6000-*-* xfails for - "print i after runto localvars_after_alloca" and - "print l after runto localvars_after_alloca" - for all compilers. - * gdb.base/exprs.exp: Add mips-sgi-irix4* xfails (works with irix5), - when not compiled with gcc, for: - "print signed char == (minus)", - "print signed char != (minus)", - "print signed char < (minus)", - "print signed char > (minus)". - * gdb.base/callfuncs.exp (do_function_calls): - Add mips-sgi-irix* xfail, when compiled with native compiler, for - "call inferior func with struct - returns char *". - * gdb.base/return.exp (return_tests): Change xfail for - "correct value returned double test" to include Solaris 2.4. - * gdb.base/funcargs.exp (float_and_integral_args): - Add sparc-sun-solaris2* xfail for "print f1 after run to call2a". - -Sat Aug 26 00:26:11 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.base/setvar.c, gdb.base/setvar.exp: Add new tests for - enumeration bitfields if compiling with GNU C. - * lib/gdb.exp: Consume `(y or n) ' in `Reinitialize source path - to empty' prompt. - -Tue Aug 22 00:30:37 1995 Jeff Law (law@snake.cs.utah.edu) - - * gdb.base/scope.exp: xfail 'scope0.c'::filelocal_bss before run - test for PRO targets. - - * gdb.base/funcargs.exp: Avoid ever setting more than 8 - breakpoints in the inferior at any given time by making - two groups of breakpoints for call2*, call6* and call7* - tests. - -Sun Aug 20 06:58:25 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.base/funcargs.exp: Fix typos introduced by Aug 15 change. - * gdb.base/callfuncs.c (main): Use struct_val1 to inhibit xlc - from optimizing it away. - * gdb.base/callfuncs.exp: Remove rs6000-*-* xfails for - "call inferior func with struct". - -Wed Aug 16 11:57:15 1995 Stan Shebs <shebs@andros.cygnus.com> - - * configure.in: Only configure gdb.chill for particular targets. - -Tue Aug 15 09:42:44 1995 Fred Fish <fnf@cygnus.com> - - * gdb.base/Makefile.in: Add action to .c.o transformation - rule that generates a .ci file for each .o file and remove - explicit .c.o rules except for callfuncs.o. - * gdb.c++/Makefile.in: Add .cc.o transformation rule that - generates a .ci file for each .o file and remove explicit - .cc.o rules. - (clean): Remove *.tmp *.ci files. - (EXECUTABLES): Remove templ-info.exp. - * gdb.base/compiler.c: New file. - * gdb.c++/compiler.cc: New file - * gdb.base/scope.exp: Source gdb.base/scope.ci. - Change rs6000-*-* xfail for - "print 'scope0.c'::filelocal_ro" and - "print 'scope1.c'::filelocal" and - "print 'scope1.c'::filelocal_bss" and - "print 'scope1.c'::filelocal_ro" and - "print 'scope1.c'::foo::funclocal" and - "print 'scope1.c'::foo::funclocal_ro" and - "print 'scope1.c'::bar::funclocal" and - "print 'scope0.c'::filelocal_ro" and - "print 'scope1.c'::filelocal at foo" and - "print 'scope1.c'::filelocal_bss at foo" and - "print 'scope1.c'::filelocal_ro at foo" and - "print 'scope1.c'::foo::funclocal at foo" and - "print 'scope1.c'::foo::funclocal_bss at foo" and - "print 'scope1.c'::foo::funclocal_ro at foo" and - "print 'scope1.c'::bar::funclocal at foo" and - "print 'scope0.c'::filelocal_ro" and - "print 'scope1.c'::filelocal" and - "print 'scope1.c'::filelocal_bss" and - "print 'scope1.c'::filelocal_ro" and - "print 'scope1.c'::foo::funclocal" and - "print 'scope1.c'::foo::funclocal_bss" and - "print 'scope1.c'::foo::funclocal_ro" and - "print 'scope1.c'::bar::funclocal" and - "print 'scope1.c'::bar::funclocal_bss" - to only be xfail'd when not compiled with gcc. - Add rs6000-*-* xfail for - "print 'scope0.c'::filelocal_bss before run" - when compiled with gcc. - (test_at_main): Add rs6000-*-* xfail for - "print filelocal_ro in test_at_main" - when compiled with gcc. - * gdb.base/ptype.exp: Source gdb.base/ptype.ci. - Add rs6000-*-aix* xfail for - "whatis unnamed typedef'd enum (compiler bug in IBM's xlc)" and - "ptype t_char_array", not compiled with gcc. - * gdb.base/list.exp (test_list_function): Add rs6000-*-* - xfail for "list foo (in include file)" when gcc compiled. - * gdb.base/funcargs.exp: Source gdb.base/funcargs.ci - (integral_args): Add rs6000-*-* xfail for - "run to call0a" if not compiled with gcc. - (unsigned_integral_args): Add rs6000-*-* xfail for - "run to call1a" if not compiled with gcc. - (float_and_integral_args): Add rs6000-*-* xfail for - "run to call2a" if not compiled with gcc and for - "continue to call2b" for any compiler. - Add rs6000-*-* xfail to - "print f1 after run to call2a" for gcc compiled. - (discard_and_shuffle): Add rs6000-*-* xfail for - "run to call6a". - (shuffle_round_robin): Add rs6000-*-* xfail for - "backtrace from call7a" if not compiled with gcc. - Add rs6000-*-* xfail for - "backtrace from call7b" if compiled with gcc. - (call_after_alloca): Add rs6000-*-* xfail for - "print c in call_after_alloca" and - "print s in call_after_alloca" and - "backtrace from call_after_alloca_subr" - if not compiled with gcc. - (localvars_in_indirect_call): Add rs6000-*-* xfail for - "print c in localvars_in_indirect_call" and - "print c in localvars_in_indirect_call" and - "backtrace in indirectly called function" and - "stepping into indirectly called function" - if not compiled with gcc. - (localvars_after_alloca): Add rs6000-*-* xfail for - "print c after runto localvars_after_alloca" and - "print s after runto localvars_after_alloca" and - "print i after runto localvars_after_alloca" and - "print l after runto localvars_after_alloca" - for all compilers. - * gdb.base/whatis.exp: Source gdb.base/whatis.ci rather - than whatis-info.exp. - * gdb.base/opaque.exp: Source gdb.base/opaque0.ci rather - than opaque-info.exp. - Setup rs6000-*-* xfail for - "ptype on opaque struct pointer (statically)" and - "ptype on opaque struct pointer (dynamically)" when - not compiled with gcc. - * gdb.base/callfuncs.exp: Source gdb.base/callfuncs.ci - rather than callf-info.exp. - (do_function_calls): Add clear_xfail for rs6000-*-* for - "p t_float_values2(3.14159,float_val2)". Seems to work - fine there, both with xlc and gcc. Need to find out what - it is doing right and fix other platforms. - * gdb.base/callfuncs.exp: Add rs6000-*-* xfail for - "call inferior func with struct - returns int", - "call inferior func with struct - returns long", - "call inferior func with struct - returns float", - "call inferior func with struct - returns double", - "call inferior func with struct - returns char *", - but only if not gcc compiled (presumes xlc compiled). - Change rs6000-*-* xfails for - "call inferior func with struct - returns char" and - " call inferior func with struct - returns short" to only - xfail if not using gcc. - (clean mostlyclean): Remove *.ci and *.tmp files. - * gdb.c++/templates.exp: Source gdb.c++/templates.ci rather - than templ-info.exp. - * gdb.base/langs.exp: Source gdb.base/langs.ci. - Add rs6000-*-* xfail for "up to foo in langs.exp" - "up to cppsub_ in langs.exp" and "up to fsub in langs.exp" - when not gcc compiled. - -Sat Aug 12 15:05:36 1995 Jeffrey A. Law <law@rtl.cygnus.com> - - * gdb.base/callfuncs.exp: Add xfails for the powerpc. - * gdb.base/corefile.exp: Likewise. - * gdb.base/list.exp: Likewise. - * gdb.base/scope.exp: Likewise. - * gdb.base/siganls.exp: Likewise. - - * gdb.base/nodebug.exp: Add xfails for the powerpc. Handle aix4 - compiler output. - * gdb.base/whatis.exp: Likewise. - -Fri Aug 11 13:36:20 1995 Jeff Law (law@snake.cs.utah.edu) - - * gdb.disasm/sh3.exp (all_fp_misc_tests): No longer expect a - failure (opcode table has been fixed to match reality). - -Mon Aug 14 09:01:59 1995 Fred Fish <fnf@cygnus.com> - - * gdb.base/callfuncs.exp: Add rs6000-*-* xfails for - "call inferior func with struct - returns char", - "call inferior func with struct - returns short" - - * gdb.base/scope.exp: Remove rs6000-*-* xfails for - "print 'scope0.c'::filelocal at main", - "print 'scope0.c'::filelocal_bss in test_at_main", - "print 'scope0.c'::filelocal at foo", - "print 'scope0.c'::filelocal_bss in test_at_foo", - "print 'scope0.c'::filelocal at bar", - "print 'scope0.c'::filelocal_bss in test_at_bar" - - * gdb.base/list.exp: Remove rs6000-*-* xfail for "list function - in source file 1". This bug seems to have been fixed with both - gcc and native cc (was native assembler bug?). - -Wed Aug 9 08:04:12 1995 Fred Fish (fnf@cygnus.com) - - * gdb.base/a1-selftest.exp: Change "i*86-*-sysv4" xfail for - "backtrace through signal handler" to "i*86-*-sysv4*". - * gdb.base/signals.exp: Add xfail for "'next' behaved as - continue" case. Add "known SVR4 bug" to fail message. - Add "i*86-*-bsdi2.0" xfail for "handle all print". - Add "i*86-*-bsdi2.0" xfail for "backtrace in signals_tests_1". - * gdb.base/ptype.exp: Add "i*86-*-sysv4*" xfail for - "whatis unnamed typedef'd enum..." and "ptype t_char_array". - * gdb.base/langs.exp: Add "i*86-*-sysv4*" xfail for - "up to foo in langs.exp", "show language at foo in - langs.exp", "up to cppsub_ in langs.exp", "show - language at cppsub_ in langs.exp", "up to fsub in - langs.exp", and "show language at fsub in langs.exp". - * gdb.base/corefile.exp: Add "i*86-*-sysv4*" to xfail for - "bactrace in corefile.exp". - * gdb.base/callfuncs.exp: Change xfail to "i*86-*-*" for - "call inferior function with struct - returns float" and - "call inferior function with struct - returns double". - -Mon Aug 7 02:43:28 1995 Jeff Law (law@snake.cs.utah.edu) - - * gdb.disasm/sh3.s: Source for sh3 disassembler tests. - * gdb.disasm/sh3.exp: Run the sh3 disassembler tests. - * gdb.disasm/configure.in (sh-*-*): Use sh3.mt makefile fragment. - * gdb.disasm/sh3.mt: Makefile fragment for sh3 ests. - -Mon Aug 7 08:09:37 1995 Fred Fish <fnf@cygnus.com> - - * Makefile.in (CHILL_FOR_TARGET): Use previously defined - (or overriden) "CHILL" macro rather then bare "gcc". - Also look for ../../gcc/xgcc since that is what we will - actually need, not "Makefile". Remove following assignment - of CHILL to CHILL_FOR_TARGET because that results in - recursive definition. - -Sun Aug 6 16:52:29 1995 Fred Fish <fnf@cygnus.com> - - * gdb.base/corefile.exp: Change xfail for backtrace in - corefile.exp from linuxaout to all linux. - * gdb.base/sigall.exp (test_one_sig): Specifically deal with - cases where we miss the breakpoint at the signal handler - for some reason. Setup xfail for linuxoldld/linuxaout and - getting SIGIO. Setup xfail for linuxoldld/linuxaout for - hitting SIGURG breakpoint. - * gdb.base/signals.exp: Setup xfail for "next" acting like - continue to add linuxoldld. Setup xfail for all linux for - "next to handler in signals_tests_1", "backtrace in - signals_tests_1", "continue to func1", "pass SIGUSR1", - and continue to handler". - -Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com> - - * Update all FSF addresses except those in COPYING* files. - -Sun Jul 30 17:50:35 1995 Fred Fish <fnf@cygnus.com> - - * gdb.base/a2-run.exp: Change messages to be more explicit about - the status of args, and quote binfile in results. - -Sun Jul 30 10:24:20 1995 Fred Fish <fnf@cygnus.com> - - * gdb.base/callfuncs.exp: Add tests for passing structs to - inferior functions and return various types. - * gdb.base/callfuncs.c: Add functions to receive a struct - and return a member of the struct, in various types. - -Sat Jul 29 14:22:33 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.base/Makefile.in (clean): Remove callf-info.exp. - -Fri Jul 28 13:36:11 1995 Brendan Kehoe <brendan@lisa.cygnus.com> - - * config/vxworks29k.exp: New file, sources vxworks.exp. - -Fri Jul 28 00:28:36 1995 Jeffrey A. Law <law@rtl.cygnus.com> - - * config/gdbremote.exp: New file. Testing framework using - gdbserver. - -Thu Jul 27 12:17:14 1995 Fred Fish (fnf@cygnus.com) - - * gdb.base/interrupt.exp: Setup "i*86-*-linux" xfail for - "call function when asleep" and "send end of file". - * gdb.base/corefile.exp: Add "i*86-*-linuxaout" to xfail list - for "backtrace in corefile.exp". - * gdb.base/a1-selftest.exp: Add "i*86-*-linux*" to xfail list - for "backtrace through signal handler". - * gdb.base/corefile.exp: Make sure we actually generate a core file - before trying the core tests. Some systems allow the user to suppress - generation of core files and default to that (linux for example). - * gdb.base/signals.exp: Change xfail for "next" acting like "continue" - from "i*86-*-linux" to "i*86-*-linuxaout". Works with ELF beta. - -Tue Jul 25 17:30:10 1995 Jeffrey A. Law <law@rtl.cygnus.com> - - * gdb.threads: New directory with some crude multi-threaded - gdb tests (step.exp and step2.exp). - * config/mt-lynx (STEP_EXECUTABLE): Define. - (THREADFLAGS): Define. - -Tue Jul 25 01:03:52 1995 Jeff Law (law@snake.cs.utah.edu) - - * gdb.base/sigall.exp: Avoid losing in SIGPRIO test on lynx. - - * gdb.base/signals.exp: Disable whole file for lynx until - further notice. - - * gdb.base/signals.exp: xfail test where "next" acts like - "continue" for lynx. - - * gdb.base/interrupt.exp: xfail test for calling function while - inferior is asleep for lynx. - - * gdb.base/watchpoint.exp: Handle more cases of gdb echoing more - than one cr-lf after each command. - -Sun Jul 23 23:33:18 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * configure.in: Reinstate setting of stabsdirs variable, fix - typo in setting up configdirs for native builds. - - * gdb.base/return.exp: Fix typo in return double test. - * gdb.base/return.c (tmp2, tmp3): Made global to inhibit the - compiler from optimizing them away. - -Fri Jul 21 11:39:34 1995 Jeff Law (law@snake.cs.utah.edu) - - * gdb.base/gdbvars.exp: Expect zero or more additional cr-lf - sequences to be echo'd by gdb when using gdb_test. - * gdb.chill/chexp.exp: Likewise. - * gdb.fortran/exprs.exp: Likewise - -Thu Jul 20 13:28:36 1995 Jeffrey A. Law <law@rtl.cygnus.com> - - * gdb.base/a1-selftest.exp: Reset the timeout value to 30 seconds - after the inferior gdb has started. - - * gdb.base/a2-run.exp: Handle gdb echoing more than one cr-lf - after each command. - * gdb.base/funcargs.exp: Likewise. - * gdb.base/gdbvars.exp: Likewise. - * gdb.base/interrupt.exp: Likewise. - * gdb.base/list.exp: Likewise. - * gdb.base/watchpoint.exp: Likewise. - * gdb.c++/demangle.exp: Likewise. - * gdb.c++/inherit.exp: Likewise. - * gdb.chill/chexp.exp: Likewise. - * gdb.fortran/exprs.exp: Likewise. - - * gdb.base/watchpoint.exp: Disable watchpoint triggered in syscall - test if we can't handle IO to/from the inferior. - - * gdb.c++/misc.exp: Always check for a program already being - started after sending a "run" command to gdb. - - * gdb.base/twice.exp: Start with a fresh gdb. - - * gdb.chill/chexp.exp: Remove skip_chill_tests check; these tests - only depend on gdb's expression code, not the chill runtime. - - * gdb.base/return.c: Put return values into variables so we - can have gdb print them rather than depending on the program - to print them. - * gdb.base/return.exp: Corresponding changes. - - * lib/gdb.exp: Provide default value for noinferiorio. - * gdb.base/interrupt.exp: Skip tests if we can't handle IO to/from - the inferior. - - * gdb.base/break.exp: Always check for a program already being - started after sending a "run" command to gdb. - (text_next_with_recursion): Don't check the output from the - program's printf statement. Instead just make sure the program - exited. - - * gdb.base/commands.exp: Protect tests which need arguments with - $noargs conditionals. - -Wed Jul 19 22:42:43 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.base/printcmds.exp: Adjust expect patterns for addresses - of structure member arrays to match gdb/valops.c:value_addr change. - -Mon Jul 17 10:12:27 1995 Jeff Law (law@snake.cs.utah.edu) - - * gdb.base/a1-selftest.exp: Fix unmatched quotes in many timeout - cases. - -Wed Jul 12 10:20:08 1995 Fred Fish (fnf@cygnus.com) - - * configure.in (configdirs): Remove gdb.chill from default list - of subdirs and then add it back in only if doing a native build. - The current chill compiler does not yet work in any cross build. - * Revert all signal changes from Jul 6. - * gdb.base/{sigall.c signals.c}: Define away signal() and alarm() - for sh-hms targets, allowing these tests to link, with no other - changes. Testing is suppressed by setting "nosignals" in site.exp. - -Thu Jul 6 20:58:30 1995 Fred Fish (fnf@cygnus.com) - - * configure.in (signaldirs): Define and add to configdirs for all - targets except some specific ones that are known to not support signals. - Also clean up formatting. - * gdb.base/Makefile.in (EXECUTABLES): Remove sigall and signals. - (signals, sigall): Remove rules to build. - * gdb.base/{sigall.c, sigall.exp, signals.c, signals.exp}: - Moved to new gdb.signals directory. - * gdb.signals: New test directory. - * gdb.signals/{Makefile.in, configure.in, sigall.c, sigall.exp, - signals.c signals.exp}: New or moved files. - -Sun Jun 25 12:55:18 1995 Jeff Law (law@snake.cs.utah.edu) - - * gdb.base/interrupt.exp: Don't choke if $nointerrupts doesn't exist. - -Wed Jun 21 16:35:55 1995 Fred Fish <fnf@cygnus.com> - - * gdb.base/return.exp: Xfail `return double' test failure - on at least Solaris 2.3 and handle future/past versions on - a case by case basis as appropriate. Also update message - to include i*86 failures. - -Wed May 24 07:10:10 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * Makefile.in: Change variable CFLAGS to TESTSUITE_CFLAGS. - - * lib/gdb.exp: Fix comment which erroneously identified - gdb_file_cmd as gdb_load (the 19 May change was in fact to - gdb_file_cmd not gdb_load). - * config/unix-gdb.exp (gdb_load): Add "upvar timeout timeout". - - * gdb.base/setvar.exp: Make test names consistent between pass and - fail cases. Use gdb_test more. - -Fri May 19 07:22:58 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * lib/gdb.exp (gdb_load): Add "upvar timeout timeout". - -Mon May 15 23:50:51 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.base/help.exp: Fix expected help string for `show commands'. - -Thu May 11 07:55:11 1995 Jim Kingdon <kingdon@deneb.cygnus.com> - - * gdb.stabs/xcoff.sed: Change N_LSYM to C_DECL not C_LSYM. - - * gdb.stabs/weird.exp: Remove xfail for xcoff bitching about lack - of a text section. - -Thu May 11 15:02:24 1995 Stu Grossman (grossman@andros.cygnus.com) - - * config/monitor.exp (gdb_target_monitor): Fix loop interator so - that loop eventually terminates. Fix Connection refused logic so - that testsuite will expire nicely. - -Wed May 10 17:57:35 1995 Stu Grossman (grossman@andros.cygnus.com) - - * config/cpu32bug.exp, config/est.exp, config/hppro.exp, - config/rom68k.exp: New tcl glue for the appropriate monitors. - These all just end up calling monitor.exp. - * config/monitor.exp (gdb_target_monitor): Handle `Connection - refused' by retrying. Cleanup some timeout issues. - * (gdb_load): Reduce timeout. Cleanup some timeout issues. - * lib/gdb.exp (gdb_test gdb_test_exact): Upvar timeout so that - callers don't have to set/restore global timeout variable. - - * The following set of changes centralizes management of the global - timeout variable. This way, it can be set in one target dependent - place instead of dozens of places scattered throughout the test suite. - If you need to lengthen a timeout, then you should either set timeout - in one of the config/{target}.exp files, or multiply it by a factor. - Setting it to an absolute value is always going to lose for some - targets. - * gdb.base/a1-selftest.exp (test_with_self): Only use local timeout. - * gdb.base/callfuncs.exp (do_function_calls): Don't set timeout. - * gdb.base/funcargs.exp: Don't set timeout. - * gdb.base/list.exp (test_forward_search): Only use local timeout. - * gdb.base/printcmds.exp (test_print_string_constants - test_print_array_constants): Don't set timeout. - * gdb.base/ptype.exp: Don't set timeout. - * gdb.base/recurse.exp: Don't set timeout. - * gdb.base/return.exp: Don't set timeout. - * gdb.base/watchpoint.exp: Don't set timeout. - * gdb.c++/classes.exp (do_tests): Don't set timeout. - * gdb.c++/virtfunc.exp (test_virtual_calls): Don't set timeout. - -Wed May 10 16:03:23 1995 Torbjorn Granlund <tege@adder.cygnus.com> - - * Makefile.in: Make clean targets work also when SUBDIRS is empty. - -Mon May 1 07:32:48 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * lib/gdb.exp: Disable chill tests for irix5. - -Wed Apr 26 07:36:03 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.base/scope.exp: Make test names unique. Use gdb_test. Make - each test pass or fail. - -Sun Apr 23 21:32:32 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.base/opaque.exp: Remove xfails for aix; print a warning if - xlc not gcc. - -Fri Apr 21 15:44:02 1995 Stu Grossman (grossman@rtl.cygnus.com) - - * cpu32bug.exp est.exp rom68k.exp: Delete. Unify into monitor.exp. - -Wed Apr 19 17:41:21 1995 Stu Grossman (grossman@cygnus.com) - - * config/est.exp: Fix copyright and comments. Remove dead code. - Use targetname, serialport and baud variables instead of fixed - constants. - * config/rom68k.exp: Fix copyright and comments. Remove dead code. - * config/cpu32bug.exp: New file to support cpu32bug monitors. - -Wed Apr 19 13:47:16 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.base/watchpoint.exp: Don't run - test_watchpoint_triggered_in_syscall for sunos. - -Mon Apr 17 12:48:52 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.base/{break.c,run.c}: Don't include vxWorks.h or stdioLib.h; - they don't seem to exist. Do include stdio.h. - -Fri Apr 14 09:40:22 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.base/a1-selftest.exp: Add alpha xfail. - -Mon Apr 10 13:07:50 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.base/watchpoint.c (main): Prompt before calling read(). - * gdb.base/watchpoint.exp (test_watchpoint_triggered_in_syscall): - Revise accordingly. Remove cruft about sending "123" several - times, until it gets noticed. Clean up the "print buf[0]" stuff - so that it passes or fails, and waits for prompts in the usual way. - -Sun Apr 9 09:02:36 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.base/recurse.exp: Fix comment. - - * TODO: Remove item about printing variables in nodebug.exp. Add - item about enabling tests which are only run on some targets. - - * gdb.base/watchpoint.exp: Various cleanups (make each test pass or - fail, make test names unique, use new gdb_test convention - regarding pattern, use gdb_test more, etc.). - - * gdb.base/bitfields.exp: Various cleanups (make each test pass or - fail, make test names unique, etc.). - -Sat Apr 8 02:47:45 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.base/nodebug.c: Change return type of top and middle to - short. - * gdb.base/nodebug.exp: Remove xfails for ecoff systems, they - are fixed by the recent mdebugread.c changes. Allow `short ()' - as type for top and middle. - -Thu Apr 6 08:54:18 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.base/break.exp: Remove commented out if $usestubs {}. As - nearly as I can tell, the whole thing was an accident in Stu's - change of 24 Mar 1995 (logged in ../ChangeLog), in which he meant - to replace a send/expect pair with gdb_test, but ended up only - adding the gdb_test. My change of 24 Mar 1995 and Kung's change - of 30 Mar 1995 took care of it, but left this vestigial comment - which I am now nuking. - -Mon Apr 3 09:00:27 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.base/break.exp: Look for different line number for - breakpoint at main depending on usestubs. - -Sun Apr 2 08:15:45 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.base/list.exp: Adjust some alternate expect patterns to - match recent list0.c change. Add alternate expect pattern for - output from `list default lines around main' for optimizing - compilers. - -Sat Apr 1 07:23:22 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * lib/gdb.exp: If nosignals is not set, set it to 0. - -Fri Mar 31 16:13:48 1995 Kung Hsu <kung@mexican.cygnus.com> - - * config/slite-gdb.exp: Responds to load symbol table prompt. - * gdb.base/break.exp: Adjust line number, fix rerun. - * gdb.base/langs0.c: Add #ifdef usestubs. - -Thu Mar 30 15:36:55 1995 Kung Hsu <kung@mexican.cygnus.com> - - * gdb.base/list.exp: Adjust line contents after adding new lines in - list0.c. Also fix a syntax error. - - * lib/gdb.exp (gdb_run_cmd): Special handling for targets use stubs. - * gdb.base/break.exp: ditto. - * gdb.base/list.exp: ditto. - * gdb.base/bitfields.c: Add #ifdef usestubs in main(). - * gdb.base/run.c: ditto. - * gdb.base/list0.c: ditto. - * gdb.base/funcargs.c: ditto. - -Wed Mar 29 17:09:29 1995 Stu Grossman (grossman@cygnus.com) - - * testsuite/config/rom68k.exp (gdb_target_rom68k): Use - $targetname, $serialport and $baud instead of hardwired variables. - * testsuite/gdb.base/{sigall.exp signals.exp}: Skip these if the - target doesn't support signals. - -Wed Mar 29 12:29:34 1995 Kung Hsu <kung@mexican.cygnus.com> - - * lib/gdb.exp (runto_main): Fix regular expression bug, add return 1. - -Tue Mar 28 08:46:45 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.base/recurse.exp: Make test names unique. Change \\(+ to \\(. - Don't rely on the value of an auto variable before it has been - initialized. Use gdb_test more. - -Mon Mar 27 08:00:34 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * lib/gdb.exp (default_gdb_version): A version number must start - with a digit, but other than that contains all characters up to - the first whitespace character. - -Sun Mar 26 13:19:32 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.base/commands.exp (breakpoint_command_test): New tests. - -Sat Mar 25 15:38:06 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.c++/*.exp: Warn if executable does not exist. The original - reason for skipping the warning was that configure.in sometimes - intentionally skipped building the executables but the tcl code - had no way of knowing. That (a) was always bogus with respect to - error handling, (b) is no longer true (right now there is no way - to skip C++ tests). - - * gdb.c++/demangle.exp: Remove unused binfile and srcfile variables. - -Sat Mar 25 01:16:10 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.base/list.exp: Add expect patterns for output from - SunPRO compiled executables. - * gdb.base/whatis.exp: Allow leading `signed' for all v_signed_* - types. - -Fri Mar 24 06:11:05 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.base/break.exp (test_next_with_recursion): Accept any line - number (we are already testing that the correct source line text - gets printed). - - * gdb.base/break.exp: Make one test if $usestubs. I'm not sure - that is what is intended, but something needed to be done to get - sunos4 native working again. - - * gdb.c++/misc.cc (main): Fix typo (#iffef -> #ifdef). - - * gdb.base/a1-selftest.exp (test_with_self): Remove comment which - apparently went with a (very) old xfail. - -Fri Mar 24 13:41:09 1995 Kung Hsu <kung@mexican.cygnus.com> - - * gdb.base/callfuncs.exp: call runto_main instead of runto main. - runto_main is a proc in gdb.exp that will do 'step' for target use - stubs. - * gdb.base/exprs.exp: ditto. - * gdb.base/interrupt.exp: ditto. - * gdb.base/opaque.exp: ditto. - * gdb.base/printcmds.exp: ditto. - * gdb.base/ptype.exp: ditto. - * gdb.base/scope.exp: ditto. - * gdb.base/setvar.exp: ditto. - * gdb.base/signals.exp: ditto. - * gdb.base/twice.exp: ditto. - * gdb.c++/classes.exp: ditto. - * gdb.c++/inherit.exp: ditto. - * gdb.c++/templates.exp: ditto. - * gdb.base/break.exp: no run and hit main for stubs. Change line - numbers for breakpoints and info breakpoint. - * gdb.base/break.c: Add #ifdef usestubs for set_debug_traps() and - breakpoint(). - * gdb.base/callfuncs.c: ditto. - * gdb.base/exprs: ditto. - * gdb.base/interrupt.c: ditto. - * gdb.base/opaque0.c: ditto. - * gdb.base/printcmds.c: ditto. - * gdb.base/ptype.c: ditto. - * gdb.base/scope0.c: ditto. - * gdb.base/setvar.c: ditto. - * gdb.base/signals.c: ditto. - * gdb.base/twice.c: ditto. - * gdb.c++/misc.cc: ditto. - * gdb.c++/templates.cc: ditto. - -Fri Mar 24 06:11:05 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * config/vx-gdb.exp, lib/gdb.exp: Regexp cleanups (\[(\] -> \\(, etc.). - - * gdb.base/a1-selftest.exp: Don't check for # followed by a digit - somewhere between `read' and `main.c'. I'm pretty sure the - pattern ".*#\[0-9\].*" was slowing down pattern matching a lot, - and it isn't particularly useful. - - * gdb.base/scope.exp: Make test names unique. \[(\] -> \\(. - -Thu Mar 23 14:58:35 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.base/commands.exp (infrun_breakpoint_command_test): New test. - -Wed Mar 22 18:36:05 1995 Kung Hsu <kung@mexican.cygnus.com> - - * config/mt-slite: add LIBS and -nostdlib. - * config/slite-gdb.exp: add this new file to support sparclite target. - -Tue Mar 21 21:41:04 1995 Doug Evans <dje@canuck.cygnus.com> - - * config/vx-gdb.exp (gdb_load): Update test of vxworks_ld return code. - - * gdb.base/a2-run.exp: Change argument to istarget from - "*-*-vxworks" to "*-*-vxworks*". - * gdb.base/{break.exp,default.exp,scope.exp}: Likewise. - -Tue Mar 21 17:08:47 1995 Kung Hsu <kung@mexican.cygnus.com> - - * lib/gdb.exp: add proc runto_main, for targets that use stubs, this - will not runto main but do a 'step' to step out of breakpoint(). - * config/mt-slite: add -Dusestubs. - -Tue Mar 21 12:14:12 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.base/printcmds.exp (test_artificial_arrays): Send ^V@ - instead of just @. - - * gdb.base/signals.exp: Add test for "handle all print". - * TODO: Remove "handle all print". Also remove item about - checking copyright date (I don't like the idea of a spurious FAIL - based on when we run the tests). - - * gdb.base/recurse.exp: Enable test for SunOS4. xfail one test - for SunOS4 (reason for failure not investigated). Remove - redundant test for $binfile. - - * gdb.base/nodebug.c (array_index): Call malloc. - - * gdb.base/{corefile.exp,default.exp}: Make names of "up" tests unique. - -Mon Mar 20 10:08:17 1995 Jeff Law (law@snake.cs.utah.edu) - - * gdb.base/recurse.exp: Update gdb_test invocation to use new - conventions and slightly simplify the matching regexp. - -Fri Mar 17 05:43:28 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.base/break.exp: Update gdb_test invocation to use new - convention. - - * lib/gdb.exp: If noargs is not set, set it to 0. - - * gdb.base/nodebug.exp: Comment out redundant test. Make name of - tests unique. - - * lib/gdb.exp: Skip CHILL for AIX and Solaris. - -Thu Mar 16 16:27:07 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.base/nodebug.exp: It is OK if GDB thinks top and middle have - one argument of type "<non-float parameter>". - -Wed Mar 15 15:54:56 1995 Stu Grossman (grossman@cygnus.com) - - * config/rom68k.exp: New file to support Motorola IDP board. - * gdb.base/a2-run.exp: Skip this file if noargs is set. - * gdb.base/break.c: Change things around so that this program - doesn't depend upon args. This is necessary to make remote - targets work (in general, they can't take args). - * gdb.base/break.exp: Don't try to send args to program. Don't - expect output. Also, replace lots of code with gdb_test. - -Wed Mar 15 04:11:14 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.base/printcmds.exp (test_character_literals_accepted): Test - printing of '\'' (which is what the comment says we are testing, - even though we were not), not '''. - (test_integer_literals_rejected): Test that printing ''' is an error. - - * gdb.fortran/exprs.exp, gdb.fortran/types.exp, - gdb.chill/chexp.exp, gdb.base/printcmds.exp, - gdb.c++/cplusfuncs.exp, gdb.chill/callch.exp, gdb.chill/misc.exp, - gdb.chill/pr-6292.exp, gdb.chill/string.exp, gdb.chill/tuples.exp: - Use gdb_test not test_print_accept. - * lib/gdb.exp: Remove test_print_accept. - - * gdb.base/signals.exp (signal_tests_1): Make pass message - consistent with fail message. - - * gdb.base/whatis.exp: Remove xfails for printing char vs. - unsigned char; the bug (PR 1821) is fixed. - - * gdb.base/scope.exp: Remove xfails for PRs 1843 and 1868. - - * gdb.base/scope.exp (test_at_localscopes): Call pass for - successful tests--makes xfailing them work right. - -Tue Mar 14 07:39:19 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * lib/gdb.exp (gdb_test): Between $pattern and $prompt, expect - only \r\n, not .*. The test can pass .* as the last thing in - $pattern if that is what it wants. In addition to providing this - flexibility, this change should speed up pattern matching in cases - where the pattern already ended with .* (there were a number of - them). This change also helps catch bad patterns--in the old - scheme the typo "char \*" instead of "char \\*" would pass. Now - it is caught. - * Many .exp files: Update callers. - - * gdb.base/funcargs.exp: Replace \[(\]+ with \\(. The latter is - clearer and does not spuriously match multiple ('s. Likewise for - ) and *. - - * gdb.base/nodebug.exp: Test ability to call a function and pass - it a string (even with no debugging info). - - * gdb.base/printcmds.exp (test_integer_literals_rejected): Change - "p '\'", which is the same as "p ''" once tcl gets done with - quoting, to "p '\\'", which I suspect is what is intended (one - backslash gets sent to GDB). - - * gdb.base/printcmds.exp (test_artificial_arrays): New tests. - -Fri Mar 10 13:31:46 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.base/a1-selftest.exp: Remove xfail for solaris. The bug (PR - 1817) was fixed literally years ago. - -Fri Mar 10 02:49:40 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.base/funcargs.exp (call_after_alloca): Remove `next' - test, it causes stepping out of call_after_alloca_subr with - optimizing compilers. - (localvars_in_indirect_call): Consume GDB prompt if `finish' - fails. - - * gdb.c++/templates.exp: Source templ-info.exp only if - the templates executable exists. - - * gdb.c++/misc.cc (class Contains_static_instance, - class Contains_nested_static_instance), - gdb.c++/classes.exp (test_static_members): Test printing of - a class that contains a static instance of the class. - -Thu Mar 9 11:43:55 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.base/langs2.c (cppsub_): Don't prototype. - * gdb.base/langs2.cxx (cppsub_): Fix prototype (cosmetic value - only, I believe). - -Wed Mar 8 10:29:33 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * lib/gdb.exp (skip_chill_tests): New procedure. - - * gdb.base/signals.exp (signal_tests_1): xfail for irix. - -Mon Mar 6 10:44:06 1995 Jeff Law (law@snake.cs.utah.edu) - - * gdb.disasm/hppa.exp: Delete redundant ".*" at the beginning of - each expect pattern. Cuts runtime from 12 to about 4 seconds. - -Thu Mar 2 05:31:34 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.base/langs.exp: Don't insist that foo__Fi be demangled. - - * gdb.disasm/hppa.exp (all_fpu_comparison_tests): Only - disassemble 8, not 16, instructions for part 4. - - * config/vx-gdb.exp (gdb_start): Use \030, not \CX. tcl doesn't - support the latter anymore. - - * gdb.base/Makefile.in: Try compiling callfuncs.c, if that fails try - -DNO_PROTOTYPES. - * gdb.base/callfuncs.c: Control use of prototypes based on - NO_PROTOTYPES, not __STDC__. - * gdb.base/callfuncs.exp (do_function_calls): xfail one of the - t_float_values2 tests if prototypes in use. - - * gdb.base/callfuncs.c (t_float_values, t_float_values2, - t_double_values): When checking differences against DELTA, check - that difference is within the range (-DELTA,DELTA), not just - (-infinity,DELTA). - -Tue Feb 28 16:28:54 1995 Kung Hsu <kung@mexican.cygnus.com> - - * config/mips-gdb.exp (gdb_load): In every test case, we need to do - 'file' command firts, then 'target', then 'load', this is due to gdb - target set up. - * config/mips-gdb.exp: Fix a couple regular exp bugs. - -Thu Feb 23 17:44:55 1995 Jeff Law (law@snake.cs.utah.edu) - - * gdb.disasm/hppa.s (fmemLRbug_tests): Add tests for the indexing - FP load/store variants. - * gdb.disasm/hppa.exp (fmemLRbug_tests): Test new variants. - -Wed Feb 22 18:29:08 1995 Jim Kingdon <kingdon@rtl.cygnus.com> - - * gdb.base/term.exp: Do not give a warning if not native, it is - not an abnormal condition. - -Tue Feb 21 13:08:47 1995 Jim Kingdon <kingdon@cygnus.com> - - * gdb.base/ptype.exp: Accept char[0] as well as char[] for "ptype - t_char_array". - -Sun Feb 19 13:10:06 1995 Jim Kingdon <kingdon@rtl.cygnus.com> - - * lib/gdb.exp (default_gdb_version): Pass GDBFLAGS to gdb when we - are getting the version number. - - * gdb.base/{a1-selftest.exp,corefile.exp}: Do not give a warning - if not native, it is not an abnormal condition. - -Thu Feb 16 15:56:56 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * lib/gdb.exp: Just use "file exists", rather than undocumented - dejagnu procedure "findfile". - -Thu Feb 16 10:30:24 1995 J.T. Conklin <jtc@rtl.cygnus.com> - - * config/mt-vxworks (CFLAGS): Set to -g -Dvxworks. - (LDFLAGS): Set to -Xlinker -Ur. - - * Makefile.in, gdb.{base,c++,chill}/Makefile.in (GDB, GDBFLAGS): - Removed, these values are set by lib/gdb.exp. - - * lib/gdb.exp: If GDBFLAGS is unset, set it to -nx. - -Wed Feb 15 14:23:28 1995 J.T. Conklin <jtc@rtl.cygnus.com> - - * config/vx-gdb.exp (spawn_vxgdb): Use default_gdb_start instead - of replicating gdb startup code. - - * config/mt-vxworks (LDFLAGS): Set to -r. - (CFLAGS_FOR_TARGET): Removed. - - * config/vx-gdb.exp: always set prompt; gdb.exp sets it to - (gdb) and gdb for vxworks uses (vxgdb). - - * Makefile.in, gdb.{base,c++,chill}/Makefile.in (GDB): If a gdb - executable is not in the tree and host != target, use sed and - program_transform_name to determine the gdb name used by the - target. - - * configure.in, gdb.{base,c++,chill}/configure.in: changed so - *-*-vxworks* matches vxworks and *-*-netware* matches NetWare. - -Sun Feb 12 08:11:58 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.base/{callfuncs.exp,callfuncs.c}: Add tests for passing - floats, chars, and shorts where there are ANSI-style function - definitions. - - * gdb.base/langs.exp, gdb.base/langs*: New test. - * gdb.base/Makefile.in: Build it. - * TODO: Remove item about checking that C names don't get C++ - demangling applied; this test tests it. - -Thu Feb 9 12:43:56 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.stabs/weird.exp: Remove "Haven't examined" comment which - went with the const70 xfail. The xfail went away a year ago. - - * gdb.base/signals.exp: Rename a bunch of tests to give unique names. - - * gdb.base/corefile.exp: Give backtrace test unique name. xfail - for hp300. - - * gdb.base/interrupt.exp: Also xfail hpux (for hp300). - - * gdb.base/a1-selftest.exp: Don't run on hp300. - -Sat Feb 4 15:04:32 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * Makefile.in (site.exp): Set host_alias and target_alias as well - as host_triplet and target_triplet. - -Wed Feb 1 08:03:48 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.base/a1-selftest.exp: Invoke stty before starting inferior. - - * gdb.base/nodebug.exp: Add xfails for ultrix and irix5 (same - places as other ecoff systems). - - * gdb.base/a1-selftest.exp (test_with_self): Don't invoke stty on - ultrix. - -Mon Jan 30 11:44:52 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.base/nodebug.c (inner): Use variables so AIX linker doesn't - remove them. - * gdb.base/nodebug.exp: Accept "function" in addition to "text - variable and "variable" in addition to "data variable". - * gdb.base/nodebug.exp: xfail datalocal and bsslocal tests for AIX. - - * gdb.base/list.exp (test_forward_search): Set listsize to 4 not - 2. - * gdb.base/list1.c (long_line): Add additional statement at start - of function. - * gdb.base/list.exp (test_forward_search): Update line number to - reflect new statement. - -Sun Jan 29 13:34:25 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.base/signals.exp: Reinitialize searched source directories - after gdb_start call. - -Sat Jan 28 01:34:44 1995 Jeff Law (law@snake.cs.utah.edu) - - * gdb.disasm/Makefile.in (clean): Delete "errs" file. - * gdb.stabs/Makefile.in: Likewise. - - * gdb.disasm/hppa.exp (all_fpu_comparison_tests): Revert last - change. Instead split the tests into smaller pieces. - * gdb.disasm/hppa.s: Corresponding changes. - -Fri Jan 27 09:24:51 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.base/a1-selftest.exp (test_with_self), gdb.base/interrupt.exp: - Quote ^C when passing it to stty. For some shells ^ is a pipe. - - * gdb.base/funcargs.exp: Modify many tests so that every test - either passes or fails. Make some test names unique. - -Thu Jan 26 19:20:34 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.base/a1-selftest.exp (test_with_self), gdb.base/interrupt.exp: - Call stty to set interrupt character. - - * gdb.disasm/hppa.mt (hppa), gdb.stabs/hppa.mt (weird.o): Check - for HP assembler versus GNU assembler based on actual behavior of - $(CC), rather than assuming that $(AS) is always the GNU assembler. - - * TODO: Suggest a few more stepping tests. - -Wed Jan 25 14:52:41 1995 Stan Shebs <shebs@andros.cygnus.com> - - * gdb.base/default.exp: xfail no-stack backtraces for h8300, - restart GDB for h8300 after a continue. - (return): Add pattern to match a29k-udi behavior. - * gdb.base/nodebug.exp: Remove obsolete comment. - * gdb.base/regs.exp: New file, testing of register displays. - * gdb.base/return.exp: Fix typo in reference to $objdir. - * gdb.base/whatis.exp: Always start with a fresh GDB. - -Wed Jan 25 11:12:07 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.disasm/hppa.exp (all_fpu_comparison_tests): Set timeout - higher, these tests generate a lot of output. - -Tue Jan 24 07:58:44 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * lib/gdb.exp (gdb_test): Remove catch from around the send. The - code following the catch silently ignored some errors; without the - catch they should be thrown like any other tcl error. Also, the - catch used "" instead of {} which meant all the callers who wanted - to include one of the characters "[]$ had to quote it an extra time. - * gdb.base/{callfuncs.exp,commands.exp,gdbvars.exp,printcmds.exp, - ptype.exp,signals.exp,watchpoint.exp}, gdb.c++/{cplusfuncs.exp, - demangle.exp}, gdb.chill/chexp.exp, gdb.fortran/exprs.exp: - Remove extra quoting. - -Mon Jan 23 21:57:54 1995 Jeff Law (law@snake.cs.utah.edu) - - * gdb.base/commands.exp: Make test names unique; every test either - passes or fails. Update some comments. - - * gdb.disasm/hppa.exp (do_system_control_tests): Update. - -Sat Jan 21 15:34:52 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - The following fixes a FAIL caused by the fact that the alpha stabs - configuration didn't use the ".if alpha" code in weird.def. - * gdb.stabs/weird.def (v_comb): Use type attribute to specify 32 - bit pointer, so the 32 bit version works even on the alpha. - * gdb.stabs/{alpha.mt,ecoff.mt,aout.sed,hppa.sed,xcoff.sed,weird.def}: - Remove the stuff which allowed us to have separate versions for - alpha and everything else. - - * gdb.c++/cplusfuncs.exp (test_lookup_operator_functions): Fix - regexp which "info func operator\[\](" is supposed to match. Fix - string to send to GDB. Note that GDB still doesn't work right. Add a - new test for "info func .perator\[\](" which GDB does handle correctly. - - * gdb.base/nodebug.exp: xfail most of the new tests for ecoff systems. - -Fri Jan 20 12:14:23 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.c++/classes.exp, gdb.c++/cplusfuncs.exp, - gdb.c++/inherit.exp, gdb.c++/templates.exp, gdb.c++/virtfunc.exp, - gdb.fortran/exprs.exp, gdb.fortran/types.exp, gdb.chill/chexp.exp, - gdb.base/printcmds.exp: Remove passcount, failcount, etc., stuff; - it makes the tests harder to understand and confuses test-o-matic. - The preferred style is that each test provides a PASS or a FAIL, - and has a unique message (e.g. "continue #54" not just "continue") - which is the same for the pass and the fail. - * gdb.fortran/exprs.exp, gdb.fortran/types.exp, - gdb.chill/chexp.exp: Move test_print_accept and test_print_reject - to lib/gdb.exp. - * gdb.base/printcmds.exp: Use test_print_accept. Remove - prt_accept which was basically the same thing. Likewise for - test_print_reject and prt_reject. - * lib/gdb.exp (test_print_reject): Add some more error message - patterns to match from the former printcmds.exp (prt_reject). - * gdb.c++/classes.exp, gdb.base/scope.exp: Remove spurious xfails. - One defect of the passcount stuff is that some of it failed to - report XPASS where appropriate. - * gdb.c++/cplusfuncs.exp (print_addr_of): No longer accept extra - stuff before and after arg in expected pattern. - (test_paddr_operator_functions): Re-do test without print_addr_of; - this is the only test which seems to want extra stuff there. - -Tue Jan 17 10:47:53 1995 Jim Kingdon <kingdon@lioth.cygnus.com> - - * gdb.base/nodebug.exp: Update new tests to reflect improved - wording of gdb output. - - * gdb.base/nodebug.exp: Add tests to check that "print", "whatis" - and "ptype" work on variables in files compiled without -g. - Replaces commented out "maint print msymbol" tests. - -Mon Jan 16 12:13:28 1995 Jim Kingdon <kingdon@lioth.cygnus.com> - - * gdb.base/setvar.c (dummy): Call malloc. - - * gdb.stabs/aout.sed: Enclose comments within a sed command to avoid - losing with the irix4 sed. - - * gdb.base/sigall.exp (test_one_sig): Add xfail for "get signal - ALRM" on irix4. - -Sun Jan 15 21:58:26 1995 Jim Kingdon <kingdon@lioth.cygnus.com> - - * TODO: Remove items about corefile.exp testing new exec-file and - backtrace; both are now done. Add items about printing enums. - -Sat Jan 14 11:25:28 1995 Jim Kingdon <kingdon@lioth.cygnus.com> - - * gdb.base/sigall.exp (test_one_sig): Attempt to recover if - "get signal $thissig" test fails. - - * gdb.base/setvar.exp: Check for and reject crazy expected type hacks. - -Thu Jan 12 01:14:53 1995 Jim Kingdon <kingdon@lioth.cygnus.com> - - * gdb.base/sigall.c (gen_*): Pass argument to handle_* to avoid - compiler warning with dec alpha compiler. - - * gdb.base/commands.exp (if_while_breakpoint_command_test): Remove - extra \n from gdb_test call (this explains why the prompt test - that I removed yesterday was there). - (user_defined_command_test): Remove extra \n and prompt test. - - * gdb.base/sigall.c: If SIGABRT == SIGLOST, just act as if SIGLOST - doesn't exist. Likewise if SIGIO == SIGPOLL, pretend SIGPOLL - doesn't exist. - * gdb.base/sigall.exp: Remove special handling for SIGIO and SIGPOLL. - Also remove alpha workaround, which turns out to be because - SIGABRT == SIGLOST. - - * gdb.base/sigall.exp: Add workaround for alpha weirdness. - - * gdb.base/help.exp: Don't test "help show". - -Wed Jan 11 14:37:04 1995 Jim Kingdon <kingdon@lioth.cygnus.com> - - * gdb.base/commands.exp: Call gdb_exit and gdb_start so that - "set print address" is on. - * gdb.base/commands.exp (if_while_breakpoint_command_test): Don't - pass prompt to gdb_test; gdb_test already looks for the prompt. - - * gdb.base/help.exp: Replace most of docstring for "define" with ".*". - - * gdb.base/a1-selftest.exp: Don't test "maint dump-me". That test - was a vestige of the manual TESTSTRATEGY, and the purpose of it - was to make sure that gdb can read a core file. But (a) the "read - the corefile" part didn't make it to a1-selftest.exp, we just - delete the corefile after creating it, and (b) we test reading - corefiles in corefile.exp anyway. Also, this test left around a - xgdb process on Solaris. - - * gdb.base/corefile.exp: Also test backtrace. - -Wed Jan 11 00:14:40 1995 Jeff Law (law@snake.cs.utah.edu) - - * gdb.base/commands.exp: Test a simple user defined command with - arguments and if/while statements; verify the full user command is - printed by "show user". - - * gdb.base/commands.exp: Test if/while commands as part of a - breakpoint command list; verify they appear in breakpoint - information. - -Wed Jan 11 00:47:58 1995 Jim Kingdon <kingdon@lioth.cygnus.com> - - * gdb.base/sigall.c (gen_FPE): Generate SIGFPE with kill() rather - than by dividing by zero. - -Tue Jan 10 21:38:05 1995 Jeff Law (law@snake.cs.utah.edu) - - * gdb.base/watchpoint.exp: hppa*-*-*bsd* no longer has problems - performing an inferior call with watchpoints enabled. - * gdb.base/watchpoint.c (main): Delete second unnecessary read - call. - -Tue Jan 10 18:42:07 1995 Jim Kingdon <kingdon@lioth.cygnus.com> - - * gdb.stabs/weird.exp: Allow spaces followed by backspaces in echo - of "file" command. - - * gdb.c++/classes.exp (test_ptype_class_objects, ptype class Foo): - Add additional pattern for when "int operator int(void);" appears - in a different order. - -Mon Jan 9 16:22:46 1995 Jim Kingdon <kingdon@lioth.cygnus.com> - - * gdb.base/signals.exp: Call gdb_exit and gdb_start. - - * gdb.base/help.exp: Replace most of docstrings for "info signals" - and "signal" with ".*". - -Wed Jan 4 11:35:19 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * TODO: Add note about "handle all nostop". - - * gdb.base/{sigall.c, sigall.exp}: New test. - * gdb.base/Makefile.in: Add it. - -Thu Jan 5 17:34:03 1995 Stan Shebs <shebs@andros.cygnus.com> - - * lib/gdb.exp, gdb.base/corefile.exp: Supply -nw as argument - when invoking GDB, suppresses any windowing interface. - -Mon Jan 2 17:40:21 1995 Stan Shebs <shebs@andros.cygnus.com> - - * config/sim-gdb: New file, simulator testing support. - -Wed Dec 28 12:21:50 1994 Jeff Law (law@snake.cs.utah.edu) - - * gdb.base/interrupt.exp: Test calling func1 twice. - -Wed Dec 21 12:51:37 1994 Jim Kingdon <kingdon@deneb.cygnus.com> - - * gdb.base/list.exp (test_forward_search): Set timeout higher - when we'll be getting lots of output from gdb. - - * gdb.base/a1-selftest.exp: Move code that was inside expect -re - "init_malloc" to after the expect statement. Run it if that - regexp is taken, but also for two others which happen if source - cannot be found. - -Tue Dec 20 12:35:21 1994 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.base/printcmds.exp: New test, for printing register before - program is running. - -Mon Dec 19 00:32:55 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.base/list.exp: Correct some alternate expect patterns - to reflect changes in list1.c. - -Sat Dec 17 14:20:03 1994 Jim Kingdon (kingdon@lioth.cygnus.com) - - * TODO: Add item regarding large frames. - - * gdb.base/{funcargs.exp, funcargs.c} (call_after_alloca): New test. - - * TODO: Remove item about enabling return.exp; it - is enabled. Suggest a few more "return" tests. - -Sat Dec 17 02:33:37 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.c++/misc.cc, gdb.c++/inherit.exp: Add testcases for - anonymous unions. - -Tue Dec 13 11:26:00 1994 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.chill/Makefile.in: Put all rule before rules for pr-4975.o - and pr-5646.o, so "make" is the same as "make all", not "make - pr-4975.o". - -Wed Dec 7 19:02:02 1994 Stan Shebs <shebs@andros.cygnus.com> - - * gdb.base/list.exp: Adjust expectations to reflect changes in - list1.c. - (test_forward_search): New test proc. - * gdb.base/list1.c (long_line): New function, has long source line. - -Thu Dec 1 23:14:49 1994 Stan Shebs <shebs@andros.cygnus.com> - - * gdb.base/a1-selftest.exp: Change initial stepping to know about - additional line of code that was added. - -Wed Nov 30 19:43:14 1994 Jeff Law (law@snake.cs.utah.edu) - - * gdb.disasm/hppa.s: Break the large branching tests into smaller - tests so as not to overflow expect's input buffers. - * gdb.disasm/hppa.exp: Corresponding changes. - -Fri Nov 25 13:37:10 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - Beginnings of template debugging tests. - * gdb.c++/templ-info.cc: New file to test for template - debugging capability of the compiler. - * gdb.c++/Makefile.in: Add rule to build templ-info.exp from - templ-info.cc. - * gdb.c++/templates.cc: Add explicit template instantiations - to enable compiling with -fno-implicit-templates. Add destructor - and 'value' method to T5 class for template tests. - * gdb.c++/templates.exp: Add testcases for printing of template - types, setting breakpoints on template methods and calling a - template method. - -Sat Nov 5 00:20:17 1994 Jeff Law (law@snake.cs.utah.edu) - - * gdb.disasm/hppa.exp (branch_tests): Allow any symbol as the - branch target since some assemblers (gas-2.5) may emit a - relocation for the branch instead of resolving it in the - assembler. - -Sat Oct 29 02:40:40 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.base/a1-selftest.exp: Remove RS/6000 xfail for backtrace - through signal handler. - -Fri Oct 21 11:10:16 1994 J.T. Conklin (jtc@phishhead.cygnus.com) - - * configure.in (*-*-netware): Use config/mt-netware. - - * config/mt-netware: New file. - * config/mt-i386-netware: Removed, separate configs for different - netware architectures are no longer needed now that we have - --with-headers. - -Sat Oct 15 03:43:00 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.base/exprs.exp: Remove xfail for alpha, it is fixed - by the recent changes to use ANSI C arithmetic conversions. - -Sun Oct 9 07:44:06 1994 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.base/corefile.exp: Add (xfail'd) test for reinit_frame_cache - bug involving using inferior_pid to figure out whether to select a - frame. - -Wed Sep 28 23:12:02 1994 Jeff Law (law@snake.cs.utah.edu) - - * gdb.disasm/hppa.exp: Change arg[0..3] to r[26..23] to - match the current disassembler output. - -Fri Sep 16 11:42:41 1994 Stan Shebs (shebs@andros.cygnus.com) - - * gdb.fortran/exprs.exp: Expect VOID instead of void. - * gdb.fortran/types.exp: Escape the expected '*'s in Fortran - types, expect "int" as type of integer values (for now). - -Wed Sep 7 23:33:51 1994 Jeff Law (law@snake.cs.utah.edu) - - * gdb.base/commands.exp: New tests for if/while commands. - -Tue Sep 6 13:16:11 1994 Per Bothner (bothner@kalessin.cygnus.com) - - * lib/gdb.exp (runto): Replace sub-pattern for hex value - by .*, since hex values have different syntax in Chill mode. - -Tue Sep 6 02:15:51 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.c++/demangle.exp (test_arm_style_demangling): Remove - linefeed from expect pattern for repeated types with indices > 9. - -Mon Aug 29 14:20:44 1994 Stan Shebs (shebs@andros.cygnus.com) - - First part of Fortran test suite. - * gdb.fortran: New directory. - * gdb.fortran/exprs.exp, gdb.fortran/types.exp: New files. - -Sat Aug 27 23:32:43 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.base/default.exp: Update expect pattern for load command - without arguments. - -Wed Aug 24 13:15:02 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) - - * configure.in: Change i386 to i[345]86. - * gdb.base/configure.in: Likewise. - * gdb.c++/configure.in: Likewise. - * gdb.chill/configure.in: Likewise. - -Tue Aug 23 19:14:06 1994 Stan Shebs (shebs@andros.cygnus.com) - - * lib/gdb.exp (gdb_run_cmd): Move comment out from between expect - patterns, since that is not a valid context for comments. - -Fri Aug 19 15:07:30 1994 Kung Hsu (kung@mexican.cygnus.com) - - * gdb.c++/demangle.exp (test_arm_style_demangling): Add tests for - repeated types and repeated types with indices > 9. - -Tue Aug 16 15:57:52 1994 Stan Shebs (shebs@andros.cygnus.com) - - * gdb.base/printcmds.exp: Remove all the a29k XFAILs tagged with - 2417; old bug has been fixed. - -Fri Aug 12 19:35:41 1994 Jeff Law (law@snake.cs.utah.edu) - - * gdb.base/interrupt.exp: When trying to wake up the inferior, - send the newline ourselves instead of assuming gdb_test will do - so when passed an empty input string. - - * gdb.stabs/hppa.mt: Use $(AS), not $(CC) to assemble the - stabs testcode. - -Fri Aug 5 17:01:07 1994 J.T. Conklin (jtc@phishhead.cygnus.com) - - * lib/gdb.exp (gdb_test): Don't send anything if the first - argument is an empty string. This makes cases where we want to - match output that is already in expect's buffers (for example, - matching a breakpoint after gdb_run_cmd has been called) work - reliably. - -Tue Aug 2 10:24:08 1994 J.T. Conklin (jtc@phishhead.cygnus.com) - - * config/netware.exp: New file. - -Thu Jul 28 12:54:07 1994 J.T. Conklin (jtc@phishhead.cygnus.com) - - * config/mt-slite (LDFLAGS): If using the newlib in the tree, set - the -B and -L prefixes so we can find the debugging stub. - - * Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): Use newlib if it is - there and we are using the gcc from the tree. - - * gdb.base/types.c: Removed. - - * gdb.base/configure.in: Look for makefile fragments in ../config. - Recognize i386-*-netware. - * gdb.c++/configure.in: Likewise. - -Mon Jul 25 23:48:50 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.base/corefile.exp: Change `else if' to `elseif', which is - the correct TCL syntax. - -Mon Jul 25 15:35:56 1994 J.T. Conklin (jtc@phishhead.cygnus.com) - - * gdb.base/opaque.exp: use runto instead of messing around with - breakpoints. Simplify by using gdb_test. - - * gdb.base/bitfields.exp: restart between tests on netware targets - because breakpoints aren't relocated after target death. Run - processes to completion. - - * gdb.base/{opaque,watchpoint}.exp: Use gdb_run_cmd. - -Sun Jul 24 09:55:51 1994 Fred Fish (fnf@cygnus.com) - - * Makefile.in: Remove extra tabs that confuse some versions - of "make". Use the newly built gdb to test with by default, - rather than the first one in the tester's search path. - -Sat Jul 23 15:05:47 1994 Stan Shebs (shebs@andros.cygnus.com) - - * gdb.base/whatis.exp (v_signed_short_array): Fix a typo. - - * gdb.base/help.exp: Update expected add-symbol-file, ignore, and - condition help. - -Tue Jul 19 10:26:32 1994 J.T. Conklin (jtc@phishhead.cygnus.com) - - * lib/gdb.exp (runto): Rewrite in terms of gdb_run_cmd. - - * lib/gdb.exp (gdb_run_cmd): New function, used to start program - running. - * gdb.base/bitfields.exp: Use gdb_run_cmd to start program. - * gdb.base/funcargs.exp: Likewise. - - * gdb.base/bitfields.exp: Simplify by using gdb_test. - * gdb.base/funcargs.exp: Likewise. - - * lib/gdb.exp (gdb_test): if match times out, don't call fail if - message is "". - -Mon Jul 18 12:18:07 1994 J.T. Conklin (jtc@phishhead.cygnus.com) - - * gdb.base/{a2-run,callfuncs,funcargs,interrupt,mips_pro,nodebug, - return,signals,twice}.exp: Handle non-existant binaries - consistantly. - - * gdb.base/corefile.exp: Execute coremaker to generate core dump. - * gdb.base/Makefile.in: Don't try to generate a core dump, we - might testing a cross development system. - -Thu Jul 14 18:13:56 1994 J.T. Conklin (jtc@phishhead.cygnus.com) - - * Makefile.in (RUNTEST_FOR_TARGET): Fix relative pathname, the - runtest script is relative to ${srcdir}, not ${rootdir}. - -Thu Jul 14 14:56:59 1994 Stan Shebs (shebs@andros.cygnus.com) - - * gdb.base/signals.exp: Allow for optionality of breakpoint - address. - -Thu Jul 14 11:21:27 1994 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.base/{ptype.exp,ptype.c}: Add t_char_array test. - -Tue Jul 12 12:22:32 1994 J.T. Conklin (jtc@phishhead.cygnus.com) - - * gdb.c++/cplusfuncs.cc: Include <stddef.h>, not <sys/types.h>, - for size_t definition. - * gdb.c++/templates.cc: Likewise - - * config/mt-i386-netware: New file. - - * gdb.base/interrupt.c: Do not test if errno == EINTR if it's not - defined. - - * gdb.base/Makefile.in: Added support for systems that name core - files by appending "core" to the program name. - * gdb.base/a1-selftest.exp: Likewise. - -Mon Jul 11 23:59:18 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.base/return.exp: Add comment and message for `return double' - test failure on Sparc Solaris. - -Mon Jul 4 12:10:48 1994 Stan Shebs (shebs@andros.cygnus.com) - - * lib/gdb.exp (runto): Allow for optionality of breakpoint address. - -Wed Jun 29 00:26:17 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.c++/misc.cc: Instantiate classes to inhibit the compiler - from optimizing them away. - * gdb.c++/classes.exp, gdb.c++/inherit.exp: Update ptype expect - patterns to include default constructors and assignment operators, - to match gcc versions beyond 2.5.8. Accept any cplus demangling - character in the output of the virtual base pointer. - -Fri Jun 24 08:15:42 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.c++/cplusfuncs.exp: Use string_to_regexp and a regular - expression match in print_addr_of to avoid unintented matches. - * gdb.c++/virtfunc.exp: Accept alternate ptype output of g++ - versions up to 2.5.8. - -Mon Jun 20 23:54:37 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.base/list.exp: Tweak alternate pattern for listing of an - included file to run under newer versions of expect. - * gdb.c++/demangle.exp: Add spaces to the expect patterns between - consecutive >'s in templates to accomodate recent cplus-dem.c change. - Remove xfail for the virtual table of BDDHookV. - -Sat Jun 18 12:51:34 1994 Stan Shebs (shebs@andros.cygnus.com) - - * lib/gdb.exp (string_to_regexp): Set a default result. - (default_gdb_start): Fix misleading message. - -Wed Jun 15 12:10:10 1994 Stan Shebs (shebs@andros.cygnus.com) - - * config/mt-a29k-udi, config/mt-i960-nindy, config/mt-sparc-aout: - Remove all CC, etc definitions. - * config/mt-hpux: New file. - * config/mt-mips-ecoff (CFLAGS_FOR_TARGET): Remove: - (CFLAGS, LDFLAGS): Define. - * config/mt-slite (CFLAGS_FOR_TARGET): Change to LDFLAGS. - - * Makefile.in (site.exp): Don't insert host_os, etc. - (just-check): Just use RUNTEST with RUNTESTFLAGS only. - (distclean): Check existence of subdir. - * gdb.base/configure.in (hppa*-*-hpux*): Recognize. - * gdb.base/Makefile.in: General cleanup and simplification. - Use CC, CFLAGS, and LDFLAGS instead of ..._FOR_TARGET versions - to build executables. Use default rule to build .o files. - (EXPECT, RUNTEST, CC): Fix relative pathname. - (site.exp): Don't insert host_os, etc. - * gdb.base/signals.c (main): Don't call signal unless SIGALRM - and/or SIGUSR1 defined. - * gdb.base/watchpoint.c: Don't include stdio.h a second time. - * gdb.c++/Makefile.in: General cleanup and simplification. - Use CC, CFLAGS, and LDFLAGS instead of ..._FOR_TARGET versions - (CFLAGS): Remove. - (EXPECT, RUNTEST_FOR_TARGET, CXX): Fix relative pathname. - -Fri Jun 10 10:55:09 1994 Jeff Law (law@snake.cs.utah.edu) - - * gdb.base/recurse.exp: Misc changes to get tests running again - after Kung's changes to the watchpoint code. - * gdb.base/watchpoint.exp: Likewise. - -Thu Jun 9 15:16:55 1994 Per Bothner (bothner@kalessin.cygnus.com) - - * lib/gdb.exp (string_to_regexp): Convert {\} also. - -Wed Jun 8 12:12:17 1994 Stan Shebs (shebs@andros.cygnus.com) - - * config/udi-gdb.exp, config/unix-gdb.exp: Call default_gdb_start. - * lib/gdb.exp (default_gdb_start): Define. - * gdb.base/bitfields.exp, gdb.base/break.exp, gdb.base/exprs.exp, - gdb.base/funcargs.exp, gdb.base/opaque.exp, - gdb.base/printcmds.exp, gdb.base/ptype.exp, gdb.base/recurse.exp, - gdb.base/scope.exp, gdb.base/setvar.exp, gdb.base/watchpoint.exp, - gdb.c++/classes.exp, gdb.c++/misc.exp, gdb.c++/virtfunc.exp: - Don't call gdb_target_udi in between tests. - -Tue Jun 7 08:30:15 1994 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.c++/demangle.exp: Use gdb_test_exact, rather than demangle - (which was basically just a local version of the same thing). In - addition to avoiding duplication, gdb_test_exact is faster. - * lib/gdb.exp (gdb_test_exact): Fix typo. - - * lib/gdb.exp (delete_breakpoints): If there were no breakpoints, - don't give an error. - - * gdb.base/term.exp: Call delete_breakpoints before starting. - - * gdb.base/Makefile.in (EXECUTABLES): Remove t10. - (t10): Add comment. - -Mon Jun 6 18:26:50 1994 Stan Shebs (shebs@andros.cygnus.com) - - Reorganization of the GDB Test Suite. - - * gdb.base: New directory, contains all the basic tests. - * gdb.c++: New directory, tests specific to C++. - * gdb.chill: New directory, tests specific to Chill. - * gdb.t00, gdb.t01, gdb.t02, gdb.t03, gdb.t04, gdb.t05, gdb.t06, - gdb.t07, gdb.t08, gdb.t09, gdb.t10, gdb.t11, gdb.t12, gdb.t13, - gdb.t15, gdb.t16, gdb.t17, gdb.t20, gdb.t21, gdb.t22, gdb.t23, - gdb.t24, gdb.t30, gdb.t31: Removed directories, contents moved - into appropriate new directories (t00-t17 to base, t20-t23 to c++, - t30-31 to chill). - * */gdbme.*: Rename to match appropriate expect scripts. - * gdb.base/bitfields.c, gdb.base/break.c, gdb.base/callfuncs.c, - gdb.base/coremaker.c, gdb.base/exprs.c, gdb.base/funcargs.c, - gdb.base/interrupt.c, gdb.base/list0.c, gdb.base/list0.h, - gdb.base/list1.c, gdb.base/mips_pro.c, gdb.base/nodebug.c, - gdb.base/opaque-info.c, gdb.base/opaque0.c, gdb.base/opaque1.c, - gdb.base/printcmds.c, gdb.base/ptype.c, gdb.base/recurse.c, - gdb.base/return.c, gdb.base/run.c, gdb.base/scope0.c, - gdb.base/scope1.c, gdb.base/setvar.c, gdb.base/signals.c, - gdb.base/types.c, gdb.base/twice.c, gdb.base/watchpoint.c, - gdb.base/whatis-info.c, gdb.base/whatis.c: New names of C files. - * gdb.c++/cplusfuncs.cc, gdb.c++/templates.cc, gdb.c++/misc.cc, - gdb.c++/virtfunc.cc: New names of C++ files. - * gdb.chill/chillvars.ch: New name of Chill file. - * gdb.base/configure.in, gdb.c++/configure.in, - gdb.chill/configure.in: Merge in contents of gdb.t*/configure.in. - * gdb.base/Makefile.in, gdb.c++/Makefile.in, - gdb.chill/Makefile.in: Merge in contents of gdb.t*/Makefile.in. - * configure.in (configdirs): Update to reflect directory changes. - (target_abbrev): No longer define for any configuration. - * Makefile.in: Cosmetic improvements to header comments. - -Fri Jun 3 18:56:06 1994 Per Bothner (bothner@kalessin.cygnus.com) - - Various changes to gdb.t31: - - * Makefile.in (gdbme.o): Compile with -fspecial_UC. - * gdbme.ch: Make all key-words and predefineds be upper-case. - * chillvars.exp: Expect key-words and predefinds in upper-case. - - * chillvars.exp: Use gdb_test_exact many places. - Change expected output for arrays (which now includes index labels). - - * pr-5020.exp, gdme.ch (module PR_5020): - New test, for PR-5020. - -Thu Jun 2 16:02:41 1994 Per Bothner (bothner@kalessin.cygnus.com) - - * lib/gdb.exp (string_to_regexp, gdb_test_exact): New procedures. - * Makefile.in (CHILL_LIB): Remove bogus redundant definitions. - -Sun May 29 22:31:42 1994 Per Bothner (bothner@kalessin.cygnus.com) - - * Makefile.in: Fix bit-rot in definitions of CHILL, - CHILL_FOR_TARGET and Chill_LIB. - * gdb.t31/gdbme.ch: Fix syntax of nested array tuples. - * gdb.t31/Makefile.in: Add definitions for CHILLFLAGS, - CHILL, and CHILL_LIB. - -Sat May 21 10:05:08 1994 Bill Cox (bill@rtl.cygnus.com) - - * Revert the previous changes. Please see Rob's directory - /lisa/test/rob/progressive/gdb/testsuite for these fixes. - -Thu May 19 12:51:00 1994 Bill Cox (bill@rtl.cygnus.com) - - * Makefile.in, configure.in, config/mips-gdb.exp, - config/mt-a29k-udi, config/mt-i386-aout, config/mt-i960-nindy, - config/mt-sparc-aout, config/udi-gdb.exp, config/unix-gdb.exp, - config/unknown.exp, gdb.t00/default.exp, gdb.t00/help.exp,, - gdb.t00/teststrategy.exp, gdb.t01/Makefile.in, gdb.t02/Makefile.in, - gdb.t02/whatis.exp, gdb.t03/Makefile.in, gdb.t03/gdbme.c, - gdb.t04/Makefile.in, gdb.t05/Makefile.in, gdb.t06/Makefile.in, - gdb.t06/break.exp, gdb.t06/signals.c, gdb.t06/signals.exp, - gdb.t08/Makefile.in, gdb.t08/opaque.exp, gdb.t09/Makefile.in, - gdb.t10/Makefile.in, gdb.t11/Makefile.in, gdb.t12/Makefile.in, - gdb.t13/Makefile.in, gdb.t15/Makefile.in, gdb.t15/funcargs.exp, - gdb.t15/gdbme.c, gdb.t15/return.exp, gdb.t16/Makefile.in, - gdb.t17/Makefile.in, gdb.t17/callfuncs.exp, gdb.t17/gdbme.c, - gdb.t20/Makefile.in, gdb.t21/Makefile.in, gdb.t21/cplusfuncs.exp, - gdb.t22/Makefile.in, gdb.t22/virtfunc.exp, gdb.t23/Makefile.in, - gdb.t24/demangle.exp, lib/gdb.exp: Check in Rob's testing - changes from 94Q1. - -Wed May 18 17:04:03 1994 Bill Cox (bill@rtl.cygnus.com), - - * config/mt-lynx, config/mt-m68k, config/mt-mips-ecoff, - config/mt-slite, config/mt-unix, config/mt-vxworks: Add - Rob's new testing fragments. - -Tue May 17 15:04:14 1994 Bill Cox (bill@rtl.cygnus.com) - - * config/mips-gdb.exp, config/udi-gdb.exp, config/vx-gdb.exp, - lib/gdb.exp: Replace error proc calls with perror. - -Mon May 16 19:00:50 1994 Stan Shebs (shebs@andros.cygnus.com) - - * gdb.t00/teststrategy.exp: Reorder so that AIX gdb can print the - version also, match on casted version strings, and match on - gdb startup case where the line numbers might be messed up. - -Fri May 13 18:00:27 1994 Bill Cox (bill@rtl.cygnus.com) - - * config/mt-i960-vx (LDFLAGS): Add '-r' option for test links. - (CFLAGS): Delete it from here. - -Tue May 3 16:08:09 1994 Kung Hsu (kung@mexican.cygnus.com) - - * gdb.t22/virtfunc.exp: Fix g++ ptype expected outputs. - -Fri Apr 29 14:26:35 1994 Stan Shebs (shebs@andros.cygnus.com) - - * Makefile.in (RUNTEST): Default to just "runtest". - -Tue Apr 26 22:21:40 1994 Jeffrey A. Law (law@snake.cs.utah.edu) - - * gdb.t17/callfuncs.exp: More comments about t_func_values tests. - * gdb.t17/gdbme.c (t_func_values): Add comments about how and why - the code has been restructured. - -Thu Apr 21 12:48:07 1994 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t00/default.exp (set write): Allow any number of \r and/or - \n, not just one of each. - - * gdb.t07/gdbme.c (main): Don't take address of an array; SunOS4 - /bin/cc gives a warning if you do. - -Thu Apr 21 11:54:04 1994 Kung Hsu (kung@mexican.cygnus.com) - - * gdb.t24/demangle.exp: change expect pattern of - __t10ListS_link1ZUiRCUiPT0 - -Wed Apr 13 15:05:00 1994 Jeffrey A. Law (law@snake.cs.utah.edu) - - * gdb.t07/{recurse.exp, recurse.c}: New tests for watchpoints - on local variables in recursive functions. - - * gdb.t07/Makefile.in: Build the new test. - -Tue Apr 12 20:45:25 1994 Jeffrey A. Law (law@snake.cs.utah.edu) - - * gdb.t17/gdbme.c (t_func_values): Do not compare function pointers - directly. Instead compare the return values from actual calls. - -Mon Apr 11 10:31:00 1994 Bill Cox (bill@rtl.cygnus.com) - - * Makefile.in (check): Set TCL_LIBRARY for runtest. - -Mon Apr 11 09:15:30 1994 Jeffrey A. Law (law@snake.cs.utah.edu) - - * From Peter Schauer with minor modifications. - * gdb.t15/return.exp (return_tests): Handle targets where "return" - stops in mid-line in the caller. Add xfail for returning a float - value on X86 targets. - -Tue Apr 5 15:16:33 1994 Jeffrey A. Law (law@snake.cs.utah.edu) - - * gdb.disasm/hppa.exp (fcmp_tests): Break up into two halves - to avoid expect lossage. - (fmem_LRbug_tests): Likewise. - * gdb.disasm/hppa.s: Corresponding changes. - - * gdb.disasm/hppa.exp: Rework escape sequences and end-of-line - conditions to work with latest dejagnu/expect. - - * gdb.t15/funcargs.exp (finish from indirect call): No longer - expected to fail on the PA. - (backtrace in call with trampolines): Explicitly require main - to be frame #1 (no trampolines should show up in backtrace). - - * gdb.t00/default.exp: Use "exp_continue" rather than obsolete - "continue -expect". - * gdb.t06/break.exp: Likewise. - * gdb.t07/watchpoint.exp: Likewise. - * gdb.t13/bitfields.exp: Likewise. - * gdb.t15/{funcargs,return}.exp: Likewise. - * gdb.stabs/weird.exp: Likewise. - * config/{mips,udi}-gdb.exp: Likewise. - - * hppa.sed: Enclose comments within a sed command to avoid - losing with the old OSF1 sed. - -Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.t02/whatis.exp, gdb.t08/opaque.exp: Add XFAILs for - sequent dynix. - * gdb.t06/signals.exp: Add clear_xfail for sequent dynix. - * gdb.t15/funcargs.exp: Conditionally step again to really - finish from marker_call_with_trampolines. Handle the case where - the first step from within call_with_trampolines already steps - us back to main. - * gdb.t15/gdbme.c: Add comment to closing brace of - call_with_trampolines for funcargs.exp. - -Tue Mar 29 23:55:27 1994 Jeffrey A. Law (law@snake.cs.utah.edu) - - * gdb.t07/watchpoint.exp (test_watchpoint_triggered_in_syscall): - Fix typo(s). - -Sun Mar 27 16:53:14 1994 Jeffrey A. Law (law@snake.cs.utah.edu) - - * gdb.t07/gdbme.c: More code for watchpoint testing. - - * gdb.t07/watchpoint.exp: Accept both "Watchpoint" and - "Hardware watchpoint" throughout file. - (test_watchpoint_triggered_in_syscall): New test. - (test_complex_watchpoint): New test. - -Fri Mar 25 17:05:31 1994 Jeffrey A. Law (law@snake.cs.utah.edu) - - * gdbme.c (call_with_trampolines): New function to try and step - into. Tests trampoline problems on the PA. - - * funcargs.exp (localvars_in_indirect_call): No longer expect - stepping into indirect call to fail on PAs. - (test_stepping_over_trampolines): New test. - -Wed Mar 23 07:43:33 1994 Jim Kingdon (kingdon@lioth.cygnus.com) - - * TODO: Add suggestions for static member function tests, and - completion tests. - -Wed Mar 16 08:28:28 1994 Jim Kingdon (kingdon@lioth.cygnus.com) - - * TODO: Add suggestions for "p/a" tests. - - * lib/gdb.exp: Set prompt to (gdb) if it isn't already set. - (default_gdb_exit): Replace all the hair with sending "quit" to - the process with a simple close. - -Tue Mar 15 08:45:50 1994 Jim Kingdon (kingdon@lioth.cygnus.com) - - * TODO: Add suggestions for shared library tests. - -Sun Mar 13 10:45:22 1994 Jim Kingdon (kingdon@lioth.cygnus.com) - - * TODO: Add suggestions for x/s tests. - -Fri Mar 11 08:22:00 1994 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t00/help.exp: Replace most of docstrings for "tbreak", - "enable once", and "enable breakpoints once" with ".*". - -Thu Mar 10 08:34:27 1994 Jim Kingdon (kingdon@lioth.cygnus.com) - - * TODO: Add suggestions about structure passing tests. - -Mon Mar 7 13:45:54 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.t03/gdbme.c: gcc version 1 puts out the wrong stabs for - the primary1 test, use work around if __GNUC__ < 2. - * gdb.t06/signals.c: Add comments for signals.exp pattern matching. - * gdb.t06/signals.exp: Add XFAILs for i386 bsd and vax ultrix. - Test for bad output rather than waiting for timeout. Issue - second continue only if first continue failed. - -Wed Mar 2 10:08:01 1994 Jim Kingdon (kingdon@deneb.cygnus.com) - - * gdb.t21/cplusfuncs.exp (test_paddr_operator_functions): Do - operator[] test with gdb_test because the old code didn't seem to - be getting the quoting right with the new dejagnu. - -Thu Feb 24 19:49:25 1994 Rob Savoye (rob@poseidon.cygnus.com) - - * lib/gdb.exp: Set GDB to a fresh gdb if there is one, else use - one from the path. - * Makefile.in: Use a fresh expect if there is one, use runtest - from the src tree if there is one. - -Thu Feb 24 18:49:37 1994 Jim Kingdon (kingdon@deneb.cygnus.com) - - * gdb.t06/break.exp (test_next_with_recursion): Remove xfail for - next over recursive call. Revise the tests from that point on - (which had been skipped) to match GDB's actual (correct) output. - - * gdb.t07/watchpoint.exp (test_stepping): Remove xfail for bug - with next over a breakpoint whose condition is false. - - * gdb.t00/help.exp: Comment out "help set print" tests just like - (and for same reason as) "help set" test. - -Mon Feb 14 09:58:23 1994 Jeffrey A. Law (law@snake.cs.utah.edu) - - * gdb.disasm/hppa.s (fmemLRbug_tests): New tests. - * gdb.disasm/hppa.exp (fmemLRbug_tests): Run them. - -Sun Feb 6 15:36:13 1994 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t06/break.exp (test_next_with_recursion): Remove no longer - necessary gdb_target_udi. - - * gdb.t03/ptype.exp: For UDI, skip tests which call malloc. - - * gdb.t02/whatis.exp, gdb.t03/ptype.exp: Remove xfails for PRs - 1838 and 2417; they are fixed. - - * gdb.t02/whatis.exp (v_char_array, v_signed_char_array), - gdb.t03/ptype.exp (ptype structure, ptype union): - Remove xfails; the test is looser than when the xfails were added. - - * gdb.t00/{help.exp,default.exp}: Don't test "target remote" on UDI. - * gdb.t00/help.exp: Don't expect remote to be in "help target" output. - - * gdb.t01/run.exp: Only run shell test if isnative. - - * config/udi-gdb.exp (gdb_load): Use "file", not "load" command, - since "run" automatically loads if necessary. Call gdb_target_udi - after the "file" since "file" kills any execution target. - - * config/udi-gdb.exp (gdb_start): Don't send "set args main" to - GDB. GDB doesn't work that way (not anymore at least) on UDI. - * gdb.t01/run.exp, gdb.t06/break.exp: Don't pass extra first - argument for UDI. - -Fri Feb 4 12:19:32 1994 Jim Kingdon (kingdon@deneb.cygnus.com) - - * gdb.t17/interrupt.c: If we get EINTR, don't print an error message. - - * gdb.t17/callfuncs.exp: Add xfails for rs6000. - -Sat Feb 5 09:11:56 1994 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t24/demangle.exp: Re-write demangle to just call gdb_test, - properly quoting regexps. This makes the second argument to - demangle a fixed string, which matches the callers, instead of a - shell-style pattern which is what the previous implementation - used. Update some of the callers. - -Sat Feb 5 10:19:09 1994 Jeffrey A. Law (law@snake.cs.utah.edu) - - * gdb.disasm/hppa.s (comib_tests): Add missing instruction. - (comib_nullified_tests): Fix typo. - * gdb.disasm/hppa.exp (all comb tests): Fix thinkos in expect - strings. No longer expected to fail. - - * gdb.disasm/hppa.s (addib_tests): Fix typo. - * gdb.disasm/hppa.exp (all addb tests): Fix thinkos in expect - strings. No longer expected to fail. - - * gdb.disasm/hppa.exp (fmpy_addsub_tests): Fix typo in expect - string. No longer expected to fail. - -Fri Feb 4 23:45:11 1994 Jeffrey A. Law (law@snake.cs.utah.edu) - - * gdb.disasm/hppa.exp (fcmp_tests): Fix thinko in expect string. - No longer expected to fail. - - * gdb.disasm/hppa.exp (xmpyu_tests): Fix buglet in expect - string. No longer expected to fail. - -Fri Feb 4 10:35:42 1994 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t24/demangle.exp: Remove a bunch more tests which differ - only in the names (I probably got most of them). I was even - generous with some which differed in underscores in names, and - probably missed a few, and I *still* was able to remove almost a - third of the file with almost no impact on testsuite coverage. - -Thu Feb 3 12:04:49 1994 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t00/default.exp: Match udi_attach error message as well as - the one from child_attach. - - * gdb.t00/default.exp: Use "." instead of "?" to match a question mark. - - * gdb.stabs/weird.exp: Remove xfail for const70; just fixed in GDB. - - * gdb.stabs/weird.def (bad_neg0type): Size of this type is 16, not 8. - * gdb.stabs/weird.exp: Remove xfail for "p bad_neg0"; this fixes it. - - * Move test with enums and partial symbols back to - gdb.t03/{ptype.exp,gdbme.c} from gdb.stabs/{weird.def,weird.exp}. - Reverts the change of 26 May 93. Per today's change to - stabs.texinfo, the behavior that weird.exp was expecting was - unreasonable; what is important is that the compiler+gdb get - things right, which happens with a recent gcc. Also fix the test - to deal with native compilers which put out the stab gdb can't - deal with. - -Mon Jan 31 15:40:11 1994 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t24/demangle.exp: Remove a bunch of tests which differ only - in the names. The main thing these accomplish is to slow things down. - Many more such duplicates surely remain. - - * gdb.t00/help.exp: Comment out "help support" test just like - (and for same reason as) "help set" test. - -Mon Jan 31 06:43:45 1994 Fred Fish (fnf@cygnus.com) - - * gdb.t06/break.exp: Remove setup_xfails for - sparc-sun-solaris2.*, these tests now pass with latest gcc and gdb. - * gdb.t20/inherit.exp (test_ptype_si): Update warning message - about known bug in gcc to include up through 2.5.8. - * gdb.t20/inherit.exp (test_ptype_vi): Accept "_vb." as well as - well as "_vb$". - * gdb.t21/cplusfuncs.exp (test_lookup_operator_functions): - Remove setup_xfails for sparc-sun-solaris2.*, these tests now pass - with latest gcc and gdb. - * gdb.t22/virtfunc.exp (test_ptype_of_classes): Accept "_vb." as - well as "_vb$". - -Sat Jan 29 23:31:26 1994 Jeffrey A. Law (law@snake.cs.utah.edu) - - * configure.in (hppa*-*-*): Also configure and build stabs-only - tests. - -Thu Jan 27 08:21:16 1994 Jeffrey A. Law (law@snake.cs.utah.edu) - - * gdb.t10/hppa.mt: A makefile fragment for the PA. - * gdb.t10/configure.in (hppa*-*-*): Use it. - -Tue Jan 25 12:58:26 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.t09/corefile: Increase timeout when spawning gdb explicitly. - -Wed Jan 19 12:40:25 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.t06/signals.exp: Handle blocked SIGTRAP on sun3 for bash - versions prior to 1.13.5. - -Tue Jan 18 20:10:50 1994 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t00/default.exp (show prompt): In FAIL case, only match if - the prompt is at the start of a line. - -Mon Jan 17 20:07:51 1994 Jeffrey A. Law (law@snake.cs.utah.edu) - - * gdb.disasm/hppa.s: Add new tests for sfu and copr instructions. - Enable "diag" instruction. Delete copr from fpu_misc_tests, it's - in the copr tests now. - * gdb.disasm/hppa.exp: Run new sfu and copr tests. Do not expect - copr in the fpu_misc tests anymore. fpu_misc tests are no longer - expected to fail. - -Fri Jan 14 14:24:21 1994 Rob Savoye (rob@darkstar.cygnus.com) - - * gdb.t00/teststrategy.exp, gdb.t07/watchpoint.exp, - gdb.t31/chillvars.exp, lib/gdb.exp: - Tweak to run under either version of expect. - * lib/gdb.exp (default_gdb_exit): Remove "catch" statement. - * gdb.t00/teststrategy.exp: Use isnative and verbose procedures. - * gdb.t11/list.exp: Remove extraneous whitespace. - -Sat Jan 15 09:57:22 1994 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t16/printcmds.exp (test_print_strings): Accept - "(unsigned char *) " before the string. - - * TODO: Add notes about printing of fancy types and GDB expressions. - -Thu Jan 13 17:16:09 1994 Stan Shebs (shebs@andros.cygnus.com) - - * Makefile.in: Pass LDFLAGS and LIBS to sub-makes. - * gdb.t06/configure.in: Don't try to compile signals test program - if doing mips-idt-ecoff. - -Thu Jan 13 08:25:55 1994 Rob Savoye (rob@darkstar.cygnus.com) - - * Most .exp files: Tweak to run under either version of expect. - -Tue Jan 11 15:21:13 1994 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t12/scope.exp: Add xfails for rs6000. Remove 1806 from existing - xfails; I'm not sure why they are failing, but not because of PR 1806. - -Mon Jan 10 22:14:20 1994 Rob Savoye (rob@darkstar.cygnus.com) - - * config/unix-gdb.exp: Remove gdb_unload cause it's already - defined in lib/gdb.exp. - -Fri Jan 7 12:42:45 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.t07/watchpoint.exp: Clear xfail for calling function with - watchpoint enabled on mips, CALL_DUMMY_BREAKPOINT_OFFSET got defined. - * gdb.t20/gdbme.cc, gdb.t21/gdbme.cc: Conversion operator functions - have to be typeless. - -Tue Jan 4 09:32:22 1994 Jim Kingdon (kingdon@lioth.cygnus.com) - - * TODO: Add suggestion for copyright year test. - -Mon Jan 3 11:35:26 1994 Stan Shebs (shebs@andros.cygnus.com) - - * configure.in (*-*-lynxos*): Add stabs tests. - -Wed Dec 1 21:54:05 1993 Jeffrey A. Law (law@snake.cs.utah.edu) - - * gdb.stabs/hppa.sed: Only lables should ever start in column zero, - so insert a tab before any assembler directive in column zero. - - * gdb.disasm/hppa.exp (all_fpu_memory_tests): Test FP quadword - stores. - * gdb.disasm/hppa.s (fpu_memory_indexing_tests): Add FP quadword - stores. - (fpu_short_memory_tests): Likewise. - -Mon Nov 22 13:23:22 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.stabs/ecoff.mt: Delete alpha specific if block, fix typo. - * gdb.stabs/ecoff.sed: Escape inserted blanks with backslashes, embed - .stabs directives in comments. - -Fri Nov 19 14:09:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * TODO: New file, describing tests we could write. - * gdb.t09/corefile.exp: Move description of tests to write to TODO. - -Tue Nov 16 21:07:44 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t06/signals.exp: Add kludge to force re-sync. - - * gdb.t00/teststrategy.exp: If we accidently send the "maint dump-me" - to xgdb instead of gdb, get out of gdb. - -Tue Nov 16 10:21:57 1993 Rob Savoye (rob@cygnus.com) - - * lib/gdb.exp: Make GDB and GDBFLAGS global so the scoping work - for info. - -Sat Nov 13 23:17:48 1993 Jeffrey A. Law (law@snake.cs.utah.edu) - - * gdb.stabs/hppa.mt: A makefile fragment for the PA. - * gdb.stabs/configure.in (hppa*-*-*): Use it. - * gdb.stabs/hppa.sed: New sed script for the PA. - -Sat Nov 13 22:50:29 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.stabs: Re-write weird.def and configuration to use sed - instead of cpp. sed is portable and POSIX; cpp is neither. - -Fri Nov 12 15:26:36 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t06/signals.exp: Remove one sun3 XFAIL which has been fixed. - -Mon Nov 8 16:55:28 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t20/gdbme.cc: Add comment about pmi being optimized out. - -Thu Nov 4 23:07:59 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.stabs/weird.exp, gdb.t22/virtfunc.exp: Accept "_vb." as well as - "_vb$". - * gdb.t00/teststrategy.exp: Add xfail for RS/6000. - * gdb.t03/ptype.exp: Add comments and messages about FAILs with xlc. - -Wed Nov 3 13:53:34 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * lib/gdb.exp: Comment out code which depends on non-existent - `transform' procedure. - -Wed Nov 3 11:23:11 1993 Rob Savoye (rob@darkstar.cygnus.com) - - * lib/gdb.exp (default_gdb_exit): Remove `catch "close"'. - * lib/gdb.exp: Transform tool name. - * gdb.t*/*.exp: Change error to perror so it works with DejaGnu - 1.1's new error handling system. - -Mon Nov 1 10:36:29 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * Makefile.in, gdb.t2*/Makefile.in: Add -O to CXXFLAGS. - -Fri Oct 29 17:58:14 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t00/default.exp: Avoid tests with a lot of .* in them. - They made pattern matching so slow that timeouts happened on - heavily loaded systems. Now any output from "show print" which - gets us back to the GDB prompt is a PASS. - -Mon Oct 25 14:36:50 1993 Stu Grossman (grossman at cygnus.com) - - * gdb.disasm/hppa.mt: Use $(srcdir) in hppa.o make rule. - -Mon Oct 25 13:35:29 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t06/signals.exp: Skip whole file with xfail for HPPA. - - * gdb.t24/demangle.exp: Remove "3220" from the one remaining xfail. - It is not from PR 3220. - -Sun Oct 24 18:49:58 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t00/{help.exp,default.exp}: Loosen up a few more tests which - just started failing because they depended on the order the - subcommands are presented, or exact docstring text. This kind of - test is a pain and has minimal benefit. - -Thu Oct 21 08:26:48 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t09/corefile.exp: At end of test, use "core" command with - no arguments. - -Wed Oct 20 08:56:02 1993 Stu Grossman (grossman at cygnus.com) - - * gdb.t{01 02 03 04 05 06 07 08 09 10 11 12 13 15 16 - 17}/Makefile.in: Make it possible to run the testsuite with Sun - make and CC = cross gcc by adding explicit build rules for .o - files. - -Tue Oct 19 14:57:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t15/funcargs.exp: Don't put comments on same line as - setup_xfail (@#$*%& tcl braindamage!). - -Mon Oct 18 21:50:08 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.disasm/hppa.exp: Use $objdir/$subdir/$binfile not just $binfile. - -Fri Oct 15 15:39:54 1993 Kung Hsu (kung@cirdan.cygnus.com) - - * gdb.t20/classes.exp: 'const xxx &' becomes 'xxx const &'. - * gdb.t20/inherit.exp: remove three dumplicate entries. - -Fri Oct 15 13:45:25 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.t06/break.exp: For "next over recursive call", fail on any - incorrect output, not just on "factorial (value=2)". - -Fri Oct 15 11:52:56 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.t12/scope.exp: Remove xfails, filename::var syntax should be - working now. Add an xfail if accesing a bss variable causes - a memory error if the target is not yet run. - -Thu Oct 14 19:16:56 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t24/demangle.exp: Clean up spacing (2 strings), inclusion of - constructor name (2 string), name of _GLOBAL_ demangling (2 strings), - name of __st* demangling (2 strings). Did Kung really get the - more than 95 others right without testing them? - -Thu Oct 14 16:27:08 1993 Kung Hsu (kung@cirdan.cygnus.com) - - * gdb.t24/demangle.exp: clean up XFAILS, more than 100 - -Thu Oct 14 11:40:30 1993 Jeffrey Law (law@cs.uah.edu) - - * configure.in (configdirs): Add gdb.disasm - * gdb.disasm: New directory for GDB disassembler tests. - * gdb.disasm/hppa.{exp,s,mt}: Disassembly tests for the HPPA. - -Thu Oct 14 11:40:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t00/help.exp: Don't test "help set". - - * gdb.t20/inherit.exp, gdb.t22/virtfunc.exp: Remove all xfails - from within expect statements. None of these happen anymore and - they cause regressions to be silently unnoticed. - - * gdb.t20/inherit.exp, gdb.t22/virtfunc.exp: Add notes (in failure - messages) about known failures with gcc cygnus-2.4.5-930417. - - * gdb.t02/Makefile.in, gdb.t08/Makefile.in: Make all depend on - comp-info.exp so it gets built if it doesn't exist. - - * gdb.t13/{Makefile.in,bitfields.exp}: Remove comp-info.exp stuff; - it is no longer used. - * gdb.t13/comp-info.c: Removed. - -Wed Oct 13 22:54:06 1993 Jim Kingdon (kingdon@deneb.cygnus.com) - - * gdb.t06/signals.exp: Add xfail for sun3. - -Thu Oct 7 12:01:03 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t17/interrupt.exp: Add xfail for Irix (currently not really - relevant because ^C doesn't get sent but failure can be reproduced - interactively). - -Tue Oct 5 10:43:11 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.stabs/alpha.mt: New configuration file for alpha. - * gdb.stabs/configure.in: Use it. - * gdb.stabs/ecoff.mt, weird-ecoff.sed: Change sed script to enable - sharing with alpha.mt, redefine long to word via preprocessor. - * gdb.stabs/weird.def: Conditionally adapt storage layout of v_comb - for alpha. - * gdb.stabs/weird.exp: Handle compilation of weird.s by alpha - native cc. - * gdb.t00/teststrategy.exp: Change expect string so that we - consume the `(xgdb)' from the command echo and from the gdb prompt. - * gdb.t05/expr.exp: xfail "print unsigned int == (~0)" on the alpha. - gdb currently compares all values as long, so this failure probably - applies to any configuration where LONGEST is bigger than a target int. - * gdb.t08/comp-info.c: New file to determine if gdbme is compiled - with gcc. - * gdb.t08/Makefile.in, opaque.exp: Use it. Alpha native cc is unable - to handle opaque pointers, gcc is. - * gdb.t21/gdbme.cc, gdb.t23/gdbme.cc: operator new takes a size_t - as first argument. Include <sys/types.h> and change all operator - new definitions to use size_t. - * gdb.t21/cplusfuncs.exp: Handle changes in output for operator new - now that we use size_t. - -Wed Sep 29 00:55:49 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.t03/ptype.exp, gdb.t15/printcmds.exp: When constructing - a long or float array cast all array members to the same type. - * gdb.t04/setvar.exp: Handle the decimal output of an unsigned long - with 64 bit longs. - * gdb.t07/watchpoint.exp: Add finish and until variations encountered - on alpha. - * gdb.t08/opaque.exp, gdb.t17/interrupt.exp: Add xfails for alpha. - -Tue Sep 28 17:26:47 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t24 (demangle.exp): Constructors of templates have names like - vector<int>::vector(int) not vector<int>::vector<int>(int). See - section 14.6 of the ARM. - - * gdb.t24 (demangle.exp): Remove a whole bunch of tests of the form - "_vt$MoveCmd"; these differ only in name from "_vt$foo", so they - accomplish little and slow down the testsuite. - - * gdb.t24 (demangle.exp): Accept "XXX const" as well as "const XXX". - Accept spaces various places. - -Tue Sep 21 17:28:45 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t07/watchpoint.exp: On sparc, clear xfail for calling function - with watchpoint enabled. - - * Makefile.in: Remove definition of CC and remove the second - definition of CXX (the "CXX = gcc" one remains). These definitions - were causing backquotes to be expanded within backquotes, which - doesn't work. - -Sat Sep 18 09:43:21 1993 Jim Kingdon (kingdon@poseidon.cygnus.com) - - * gdb.t17/callfuncs.exp: Add "return 0" to end. - -Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.stabs/ecoff.mt: Remove STABSCC hack. - * gdb.stabs/weird.exp: Handle the case where weird.o is compiled - by mips cc and contains no stabs entries. - -Thu Sep 16 17:22:12 1993 Rob Savoye (rob@darkstar.cygnus.com) - - * config/vx-gdb.exp: Use fake device to load files rather than - NFS. - * lib/gdb.exp: New proc to do "file" command. - * config/unix-gdb.exp: Use new "file" proc. - -Thu Sep 16 13:45:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) - - * config/mips-gdb.exp (gdb_load): Increase timeout to 2400. - Rework board rebooting slightly. - (gdb_exit): Don't exit from the remote shell; there isn't one. - * gdb.stabs/weird.exp: If a program is being debugged already, - kill it. - * gdb.t04/setvar.exp: Stop and restart gdb. - * gdb.t05/expr.exp: Likewise. - * gdb.t07/watchpoint.exp: If target is mips-idt-*, stop and - restart gdb and reload the program. - * gdb.t08/opaque.exp: Likewise. - * gdb.t12/scope.exp: Likewise. - * gdb.t13/bitfields.exp: Likewise. - * gdb.t15/funcargs.exp: Likewise. - * gdb.t20/classes.exp: Likewise. - * gdb.t03/ptype.exp: Increase timeout. - * gdb.t16/printcmds.exp (test_print_string_constants, - test_print_array_constants): Likewise. - * gdb.t17/callfuncs.exp (do_function_calls): Likewise. - * gdb.t20/classes.exp (do_tests): Likewise. - * gdb.t22/virtfunc.exp (test_virtual_calls): Likewise. - -Wed Sep 15 14:24:36 1993 Ian Lance Taylor (ian@cygnus.com) - - * gdb.stabs: Renamed *wierd* to *weird*. - -Wed Sep 15 10:36:50 1993 Jim Kingdon (kingdon@cirdan.cygnus.com) - - * gdb.t13/bitfields.exp: Test for bad output rather than waiting - for timeout. Add "known gcc 2.4.5 bug" to failure message. - -Tue Sep 14 17:16:44 1993 Jim Kingdon (kingdon@cirdan.cygnus.com) - - * gdb.stabs/wierd.exp (print_wierd_var): Test size, not type name. - (do_tests): Remove xfail for whatis on one_var and two_var. - -Wed Sep 8 23:14:23 1993 Rob Savoye (rob@darkstar.cygnus.com) - - * Makefile.in: Made cross building work better by adding - {RUNTEST,CC}_FOR_TARGET and using TARGET_FLAGS_TO_PASS. - -Tue Sep 7 14:11:52 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t15/{return.c,return.exp,Makefile.in}: - New test, currently commented out. - -Tue Aug 31 16:51:29 1993 Rob Savoye (rob@darkstar.cygnus.com) - - * config/udi-gdb.exp: gdb_exit now kills any isstip processes - still running and removes the leftover named socket so GDb can do - clean restarts. - -Mon Aug 30 17:55:16 1993 Rob Savoye (rob@darkstar.cygnus.com) - - * gdb.t01/run.exp: Add match for VxWorks, cause I/O comes out the - console, not GDB. - * config/mt-*: Added default values for RUNTEST and RUNTESTFLAGS so - cross testing works better with "make check" - * config/unix-gdb: Use default procedures for exit and version. - * config/vx-gdb.exp: Cleaned up and massaged back to working order - with the newest VxWorks. - -Thu Aug 26 17:50:28 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t20/classes.exp: For "ptype class Base1", continue to accept - old form. - - * gdb.t22/virtfunc.exp: If it prints `struct' (not `class') with a - name (e.g. devo gdb with gcc 2.4.5), it is still a pass. - - * gdb.t10/crossload.exp: Skip whole file (for now, until we fix it). - - * config/unix-gdb.exp: Remove this version of gdb_exit - * lib/gdb.exp: Merge in all the crap from config/unix-gdb.exp. - Rob says he'll look at it when he gets back to testing boards. - -Thu Aug 26 07:20:00 1993 Fred Fish (fnf@deneb.cygnus.com) - - * gdb.t22/virtfunc.exp: Accept missing struct/class names as - an expected fail for certain ptype commands. - - * gdb.t20/classes.exp: Update expected results of "ptype class - Base1" to account for the constructor that now appears in the type. - -Wed Aug 25 16:48:05 1993 Fred Fish (fnf@deneb.cygnus.com) - - * configure.in (configdirs): Restore gdb.t04, which mysteriously - disappeared from list. - * config/{udi-gdb.exp, gdb-unix.exp}: Replace calls to obsolete - "alldone" proc with call to cleanup and exit. - * {gdb.t01/run.exp, gdb.t01/term.exp, gdb.t02/whatis.exp, - gdb.t03/ptype.exp, gdb.t04/setvar.exp, gdb.t05/expr.exp, - gdb.t06/break.exp, gdb.t07/watchpoint.exp, gdb.t08/opaque.exp, - gdb.t09/corefile.exp, gdb.t10/crossload.exp, gdb.t11/list.exp, - gdb.t12/scope.exp, gdb.t13/bitfields.exp}: Replace calls to - "alldone" proc with simple returns that suppress remaining - tests. The alldone proc went away many months ago. - -Tue Aug 24 11:04:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t10/nodebug.exp: Comment out "maint print msymbols" tests. - - * gdb.t12/gdbme0.c (localscopes, autovars): Modify to foil gcc -O. - -Thu Aug 19 22:08:41 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.t15/funcargs.exp: Allow arguments for main in backtraces - as vax gdb will display them. - -Thu Aug 19 18:18:59 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t20/gdbme.cc: Do some calculation with v.x, to confound - optimizers. - - * scope.exp: Change "bad value for localval" messages so each one - is unique. - - * config/unix-gdb.exp (gdb_exit): Move info on this vs. - lib/gdb.exp (gdb_exit) from ChangeLog to comments. - - * gdb.t06/signals.exp: Skip the whole file with xfail for delta68. - -Tue Aug 17 00:05:28 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t00/teststrategy.exp: Deal with it if cmdsize = 1 line - doesn't exist (due to optimization). - -Mon Aug 16 21:05:49 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.stabs/wierd.exp: Deal with it if echo of "file" command - contains \r because the filename is long. - - * gdb.t06/signals.exp: Revise comments regarding "'next' behaved as - 'continue'" bug, and change xfail back to i*86-univel-sysv4*. - -Mon Aug 16 03:05:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.t00/help.exp, gdb.t02/whatis.exp, gdb.t07/watchpoint.exp, - gdb.t08/opaque.exp, gdb.t17/interrupt.exp: Update for vax running - Ultrix. - * gdb.t02/whatis.exp: Use procedure to setup xfails on long versus - int tests. - * gdb.t08/opaque.exp: Use procedure to setup xfails for opaque tests. - -Thu Aug 12 15:24:28 1993 Fred Fish (fnf@deneb.cygnus.com) - - * Makefile.in (distclean): Remove *.log *.plog *.sum *.psum site.*. - - * gdb.t17/interrupt.exp: Fix 'missing Continuing' case so pattern - to match does not match the passing case but still matches the - failing case. - -Thu Aug 12 16:58:59 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * Makefile.in (distclean): Remove *.plog *.sum *.psum site.*. - -Wed Aug 11 19:47:27 1993 John Gilmore (gnu@rtl.cygnus.com) - - * lib/gdb.exp (gdb_exit): Move the best version of gdb_exit - to here. Fix 'Quit anyway.*?' bug (? is a regexp metacharacter). - * config/{mips-gdb.exp, nind-gdb.exp, udi-gdb.exp, vx-gdb.exp}: - Remove various versions of gdb_exit. - * config/vx-gdb.exp: Remove quit_vxgdb, change a caller to call - gdb_exit. - * config/unix-gdb.exp: gdb_exit remains here, and should override - the generic version, since it's doing a lot of wierd stuff that - the other versions aren't. FIXME, fold it in, or abandon this - version. - -Wed Aug 11 12:09:32 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t24/demangle.exp: Add tests for PR 3220. - -Tue Aug 10 15:49:35 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t24/demangle.exp: Add lucid test for __vtbl__3foo__vt_cc_main_. - -Tue Aug 10 15:45:25 1993 Fred Fish (fnf@deneb.cygnus.com) - - * gdb.t07/watchpoint.exp: Clear xfail with "i*86-*-*", not just - "i386-*-*". Works for i486 as well. - - * gdb.t06/signals.exp: Rework code that recognizes known SVR4 - bug, and expand domain of xfail to all SVR4 systems, since the - actual problem is likely to be in generic SVR4 /proc support. - -Tue Aug 10 15:49:35 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * config/unix-gdb.exp (gdb_load): Add eof to expect statement. - -Tue Aug 10 09:56:56 1993 Fred Fish (fnf@deneb.cygnus.com) - - * gdb.t17/interrupt.exp: Set up xfail for *-*-sysv4*, in chain of - xfails for other systems. Match a missing 'Continuing.' as an - explicit fail for i*86-*-sysv4*, so it doesn't hose other tests. - - * gdb.t20 {classes.exp, inherit.exp, misc.exp}, gdb.t21/cplusfuncs.exp, - gdb.t22/virtfunc.exp, gdb.t23/templates.exp, gdb.t31/chillvars.exp: - Only issue warning for missing executables if -all option is used. - - * gdb.stabs/wierd.exp: Only issue warning for missing wierd.o - file if -all option is used. It's like an unpredictable XFAIL. - -Mon Aug 9 10:13:34 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t15/funcargs.exp: Add comments that hppa xfails are only - for dynamically linked binaries. - - * gdb.t10/crossload.exp: Add `set gnutarget auto' at end of tests. - -Sun Aug 8 14:21:29 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t20/inherit.exp: Change message for "print tagless struct" - to state that this is a known bug in old versions of g++. - -Fri Aug 6 21:40:30 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.t17/interrupt.exp: Add xfail for 386 bsd. Accept echoed newline - while waiting for `Continuing'. - -Fri Aug 6 13:38:08 1993 Fred Fish (fnf@deneb.cygnus.com) - - * gdb.t10/nodebug.exp: Expect to find local/global minimal symbols - in text, data, and bss. - * gdb.t10/nodebug.c: Add local and global test variables for - initialized and uninitialized data. - -Thu Aug 5 12:18:40 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * config/unix-gdb.exp (gdb_exit): Add "wait". - -Thu Aug 5 18:14:06 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.t06/signals.exp: xfail the continue from the handler for all - targets. - - * gdb.t07/watchpoint.exp: clear_xfail for i386 when calling a - function with watchpoints enabled, the i386 call dummy starts with - a call. - - * gdb.t00/teststrategy.exp, gdb.t09/Makefile.in: Handle the way - 386 bsd names its corefiles. - -Wed Aug 4 08:53:41 1993 Fred Fish (fnf@cygnus.com) - - * gdb.t10/Makefile.in (nodebug.o): Don't use "-c -o", many - compilers don't grok it. - * gdb.t16/gdbme.c (ctable1): Initialize unsigned char array - with small octal ints rather than character constants, which - are signed and might not fit if first promoted to int. - -Tue Aug 3 18:28:25 1993 Fred Fish (fnf@cygnus.com) - - * gdb.t09/Makefile.in (clean): Remove corefile. - -Mon Aug 2 12:47:44 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t07/watchpoint.exp: Add missing `$prompt $'. - -Mon Aug 2 12:30:14 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - and Jim Kingdon (kingdon@cygnus.com) - - * gdb.t06/signals.exp: Change xfail from "*-*-*" to be only for - NO_SINGLE_STEP machines. Fix comment about its cause. Uncomment - the `continue' test right after it (also xfailed if NO_SINGLE_STEP). - -Fri Jul 30 19:46:55 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t17/interrupt.exp: Add xfail for hppa. - -Fri Jul 30 12:54:11 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.t02/whatis.exp, gdb.t03/ptype.exp, gdb.t08/opaque.exp, - gdb.t09/corefile.exp: Cleanup xfails for fixed mips bugs. - * gdb.t13/bitfields.exp, gdbme.c: Examine a variable in the inferior - to determine signed-ness of bitfields and use the result to setup - the xfail. - * gdb.t15/gdbme.c: Add comments to the two indirect call0a lines. - * gdb.t15/funcargs.exp: Use them to step until the second indirect - call line is reached if necessary. - -Thu Jul 29 20:33:08 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.stabs/wierd.exp: New test, for nameless baseclasses. - -Mon Jul 26 00:15:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t06/break.exp: Also test `clear' command. - -Wed Jul 21 18:03:38 1993 Jim Kingdon (kingdon@deneb.cygnus.com) - - * gdb.t00/teststrategy.exp: Remove extra quote. - - * gdb.t07/watchpoint.exp: Change xfail for calling function with - watchpoint enabled to be for all non-68k machines. - - * gdb.t15/{mips_pro.{c,exp},Makefile.in}: New test. - -Mon Jul 19 23:59:26 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.stabs/configure.in: If configured -with-gnu-as for mips-*-* - targets use aout.mt instead of ecoff.mt as gas understands - standard aout format. - -Mon Jul 19 18:14:06 1993 Jim Kingdon (kingdon@deneb.cygnus.com) - - * lib/gdb.exp (runto): Don't insist that function we are running to - was compiled with -g. - - * gdb.t10/{nodebug.{c,exp},Makefile.in}: New test. - - * gdb.t17/interrupt.exp: Before sending ^C, give the inferior time - to get back into the read system call. - Accept leading newline in case where we woke it up. - -Sun Jul 18 08:40:45 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.stabs/{ecoff.mt,wierd-ecoff.S,wierd-ecoff.sed}: New files - to make the stabs test work on ecoff systems using gcc and -with-stabs. - * gdb.stabs/{Makefile.in,configure.in,aout.mt,xcoff.mt}: Modify to - enable ecoff configuration. - -Thu Jul 15 11:54:58 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t15/funcargs.exp (localvars_in_indirect_call): New test. - -Wed Jul 14 09:36:42 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t16/printcmds.exp: Add another printf test. - -Wed Jul 14 15:37:13 1993 Ian Lance Taylor (ian@cygnus.com) - - * configure.in: If configured -with-stabs on any target, add - stabsdirs to configdirs. - -Wed Jul 14 09:36:42 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t16/printcmds.exp: Change printf "%f\n" to printf "%f is - fun" so pattern does not match the command itself. - -Mon Jul 12 11:22:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t15/{gdbme.c,funcargs.exp}: Test for alloca-influenced frames. - -Sun Jul 11 12:03:24 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t17/interrupt.exp: Test for more things. - -Fri Jul 9 14:11:17 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t07/watchpoint.exp: In until test, deal with the way the DEC - compiler arranges the code and line numbers. - - * gdb.t17/interrupt.exp: Don't send \n after ^C. - -Fri Jul 9 09:47:02 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.t00/help.exp: Increase expect input buffer size. - -Thu Jul 8 14:26:50 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t06/signals.exp: Remove sparc xfail; bug fixed. - - * gdb.t07/watchpoint.exp: Add xfail for hppa. - - * gdb.t17/{gdbme.c,callfuncs.exp}: Add sum10 function, to test pa bug. - - * gdb.t06/signals.exp: At "p func1 ()" test, check for breakpoint - [0-9]*, not just [0-9]. - -Wed Jul 7 17:52:28 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t20/{gdbme.cc,classes.exp}: Add xfail for gdb/2972. - - * gdb.t2*: Set CXXFLAGS, not CFLAGS, since that's what we use. - -Tue Jul 6 13:54:49 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t00/help.exp: Replace most of docstring for "continue" with .*. - -Mon Jul 5 22:03:45 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t06/signals.c: Add xfails for sun3. - - * gdb.t07/watchpoint.exp: Comment out xfail for fixed bug 1836. - - * gdb.t07/{gdbme.c,watchpoint.exp}: Add test for 2597. Also add - test_stepping tests. - -Fri Jul 2 09:08:10 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t{06,17}/Makefile.in (clean): Remove all executables. - - * gdb.t17/{interrupt.{c,exp},Makefile.in}: New test for solaris bug. - - * gdb.t06/twice.exp, Makefile.in: Just use an include of twice.c - rather than actually putting it through cpp twice. - - * gdb.t06/signals.exp: Add xfails for unixware and rs6000. - -Fri Jul 2 10:48:03 1993 Ian Lance Taylor (ian@cygnus.com) - - * config/mips-gdb.exp (gdb_exit): Removed close statement which is - no longer needed. - -Fri Jul 2 09:08:10 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t06/signals.exp: Add test for sparc bug with do_save_insn. - - * gdb.t20/{classes,inherit}.exp: If a class which doesn't use any - C++ features prints as "struct", make it a pass, not an xfail. - -Thu Jul 1 22:03:33 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t22/virtfunc.exp: Remove a bunch of xfails. - Don't require VA to print as "class" rather than "struct". - -Thu Jul 1 18:27:40 1993 Jim Kingdon (kingdon@cygnus.com) - - * gdb.t06/twice.exp: Don't care about the file name GDB prints. - -Wed Jun 30 18:01:00 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t{02,13}/comp-info.c, gdb.t06/twice.exp: Add "return 0" to end. - -Tue Jun 29 13:15:42 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.t12/scope.exp: Remove xfail for parameter printing in wrong - order. - -Tue Jun 29 09:22:29 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t16/printcmds.exp: Add printf tests. - - * gdb.t06/{twice.{c,exp},Makefile.in}: New test. - - * gdb.t10/Makefile.in (clean): Remove $(EXECUTABLES) too. - -Mon Jun 28 11:25:59 1993 Fred Fish (fnf@cygnus.com) - - * gdb.t20/classes.exp: Add clear_xfail's before printing summary - pass counts, to counteract any existing or future setup_xfails. - -Mon Jun 28 09:15:17 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.stabs/wierd{.def,-aout.S,-xcoff.S}: Use new macros - {BEGIN,END}_COMMON for common block instead of STAB. - * gdb.stabs/wierd.exp: Add xfail for rs6000. - - * gdb.stabs/wierd.def: Make value of N_GSYM's 0. - intp_var should be N_GSYM not N_LSYM. - wierd-aout.S: Use a label for the value of the N_SO. - wierd.def: Remove all backslashes. - wierd-{aout,xcoff}.S: Put a few tests with backslashes here. - -Mon Jun 28 07:21:51 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.t20/gdbme.cc (main): Move variable initialization for AIX to - get the expected next to inheritance3. - -Sun Jun 27 12:29:53 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.t00/teststrategy.exp: Remove expected failure for mips-*-* - now that gcc-2.4 gets it right. - -Fri Jun 25 12:00:46 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.stabs/wierd{.def,.exp,-aout.S,-xcoff.S}: Add common block test. - - * gdb.t{02,13}/{Makefile.in,gdbme.c,comp-info.c}: New way of - generating comp-info.exp which works for cross-compilation. - -Thu Jun 24 16:55:05 1993 Fred Fish (fnf@cygnus.com) - - * gdb.t11/list.exp: For SVR4 xfails, match "*-*-sysv4*", not - "*-*-sysv4.*". - -Tue Jun 22 21:17:26 1993 Fred Fish (fnf@cygnus.com) - - * gdb.t01/run.exp: Start with a fresh gdb. - * gdb.t11/list.exp: For SVR4 xfails, match on all versions of - SVR4.x. - -Mon Jun 21 15:23:22 1993 Fred Fish (fnf@cygnus.com) - - * {gdb.t01, gdb.t02, gdb.t03, gdb.t04, gdb.t05, gdb.t06, gdb.t07, - gdb.t08, gdb.t09, gdb.t10, gdb.t11, gdb.t12, gdb.t13, gdb.t15, - gdb.t16, gdb.t17, gdb.t20, gdb.t21, gdb.t22, gdb.t23, gdb.t30}/ - Makefile.in (distclean, realclean): Remove gdbme.c from list of - things to remove. - -Sat Jun 19 07:49:10 1993 Fred Fish (fnf@cygnus.com) - - * gdb.t24/demangle.exp (test_gnu_style_demangling): Add some new - test cases from bug reports. - -Fri Jun 18 10:38:49 1993 Fred Fish (fnf@cygnus.com) - - * gdb.t06/break.exp: Add xfails for sparc-sun-solaris2.*. - * gdb.t12/scope.exp: Add clear_xfails at appropriate places to - avoid spurious xfails. - * gdb.t20/classes.exp: Add xfails for longstanding C++ problems. - * gdb.t21/cplusfuncs.exp: Add xfails for sparc-sun-solaris2.*. - * gdb.t22/virtfunc.exp: Add xfails for longstanding C++ problems. - -Wed Jun 16 10:11:57 1993 Fred Fish (fnf@cygnus.com) - - * gdb.t00/teststrategy.exp: Rework to provide more useful - description of each test, fix problem with systems that define - ALIGN_STACK_ON_STARTUP code, other misc cleanups. - * gdb.t06/break.exp (test_next_with_recursion): Fix expected - results for "next over recursive call" so timeouts aren't taken - by error. - -Mon Jun 14 09:09:04 1993 Jim Kingdon (kingdon@cygnus.com) - - * gdb.t12/scope.exp: Test printing of variables before run. - - * gdb.t12/{gdbme0.c,scope.exp}: Test for bug where parameters are - printed in wrong order due to sorting. - -Sat Jun 12 15:03:58 1993 Fred Fish (fnf@cygnus.com) - - * gdb.t00/teststrategy.exp: Fix expected results for printing - user entered string constant. Is array of char, prints with no - address. - - * gdb.t00/{default.exp, help.exp}: Account for changes to radix - commands. - * gdb.t16/gdbme.c: Add and use struct containing arrays of char. - * gdb.t16/printcmds.exp: Fix all lines that match "unsigned char *". - * gdb.t16/printcmds.exp (test_print_char_arrays): Test printing - of struct of char arrays. - * gdb.t00/radix.exp: New tests for radix commands. - -Fri Jun 11 13:12:27 1993 Jim Kingdon (kingdon@cygnus.com) - - * gdb.t16/printcmd.exp: Print a variable before running program - (with xfail for AIX). - -Thu Jun 10 11:04:04 1993 Jim Kingdon (kingdon@cygnus.com) - - * gdb.t06/{signals.exp,signals.c,Makefile.in}: New test. - - * gdb.t16/printcmd.exp: Don't print variables before running program. - - * gdb.t06/break.exp: Don't require envp argument to main. - - * gdb.t0{2,3,4,5}/gdbme.c [_AIX]: Use signed keyword. - - * gdb.t02/whatis.exp, gdb.t11/list.exp: - Add xfails for rs6000. - - * gdb.t02/whatis.exp: Change other tests not to re-test something - we already tested. - - * gdb.t{03,15,16}/gdbme.c: Reference all variables and make sure - each type used has a variable of that type. - -Tue Jun 8 16:45:20 1993 Jim Kingdon (kingdon@rtl.cygnus.com) - - * gdb.t20/{inherit.exp,gdbme.cc}: Test tagless structure. - -Fri Jun 4 11:07:19 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com) - - * configure.in: change srctrigger to be a file, not a directory - -Fri Jun 4 08:23:57 1993 Ian Lance Taylor (ian@cygnus.com) - - * configure.in (mips-idt-ecoff*): Added trailing '*'. - - * gdb.t11/list.exp: Fixed a couple of typos. - -Tue Jun 1 21:28:06 1993 Fred Fish (fnf@cygnus.com) - - * gdb.t00 (teststrategy.exp): Remove notice about PR 1823. Bug - is fixed and PR is closed. - * gdb.t16 (gdbme.c): Add simple test string variable. - * gdb.t16 (printcmds.exp): Add tests with simple test string - variable, primarily for boundaries on "set print elements". - -Mon May 31 11:36:08 1993 Jim Kingdon (kingdon@cygnus.com) - - * gdb.stabs/wierd.exp: Remove xfail for printing big integer. - Make leading 0's optional and don't expect a tab in the middle - of the number. - - * gdb.t00/teststrategy.exp: Remove xgdb before trying the copy. - - * gdb.stabs/wierd.def: Type attributes must be preceded by number=. - * gdb.stabs/wierd.exp: Remove xfails for type attributes. Also - don't end command passed to gdb_test with newline. - - * gdb.t13/{Makefile.in,gdbme.c,bitfields.exp}: If we #defined the - signed keyword away, don't expect signed bitfields to be signed. - - * gdb.t13/bitfields.exp (bitfield containment): Accept the fields - printing with only as many 1's as are in the field as well as printing - with 32 1's (see comment). - -Sat May 29 17:57:01 1993 Fred Fish (fnf@cygnus.com) - - * gdb.t00/default.exp: Start with a fresh gdb. - * configure.in (configdirs): Remove gdb.t31 until the chill - compiler works again. It no longer is able to find chillrt0 - since it isn't in libchill.a anymore. - * gdb.stabs/wierd.exp: Rewrite to properly handling a missing - wierd.o, make more modular. - * gdb.stabs/wierd.def (bad_neg0type, bad_neg0const): Remove - spurious newlines that caused problems. - -Wed May 26 09:57:19 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * Move test with enums and partial symbols from gdb.t03/ptype.exp - to gdb.stabs/wierd.exp since GCC has worked around the bug. - gdb.stabs/wierd.{exp,def}: Many new tests. - - * gdb.t00/default.exp: update info line for new message. - - * gdb.t02/{whatis.exp,gdbme.c}: - Test that "char *" doesn't print as "caddr_t". - -Tue May 25 13:28:27 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t00/help.exp: Use .* in place of some help messages which - just changed. - gdb.t00/default.exp: Update "info frame" test for new message. - * gdb.stabs/wierd.exp: Check for eof, directly or via gdb_test. - Remove some xfails - -Mon May 24 00:24:47 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.t03/{gdbme.c,ptype.exp}: - Add tests for typedef'd struct and union without tags. - Also check "whatis" on a variable of a typedef'd enum without a tag. - - * gdb.t00/teststrategy.exp: For p "foo", remove sun4 XFAIL (see - PRMS 1823; the bug still exists but isn't reproduced by this test - anymore), and remove rs6000 XFAIL (the bug is fixed). - - * gdb.t03/ptype.exp: Comment out a lot of tests which are basically - duplicated from whatis.exp. For those that are left, accept - "long", "long int", or "int" for long variables (whatis.exp already - has an XFAIL for "int", so no need to fail it here). - - * gdb.t02/whatis.exp, gdb.t10/crossload.exp: - Deal with GCC's names for types now that GDB uses the compiler's names. - - * gdb.t02/{Makefile.in,gdbme.c,whatis.exp}: If not GCC, do some - setup_xfail's for sunos4. If we #defined the signed keyword away, - don't expect GDB to know that char it is signed. - - * gdb.t00/teststrategy.exp: Update for symbolic signal names. - -Sun May 23 08:44:55 1993 Fred Fish (fnf@cygnus.com) - - * configure.in (configdirs): Add gdb.t24 for C++ tests that - should work on any system, regardless of debugging format. - * gdb.t21/demangle.exp: Move to gdb.t24. - * gdb.t24/demangle.exp: Move from gdb.t21. - * gdb.t24/{Makefile.in, configure.in}: New files. - -Thu May 20 19:39:03 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * configure.in: Do gdb.stabs and C++ tests only for stabs. - * gdb.stabs: New directory. - -Tue May 18 21:12:09 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * config/{mips,nind,udi,unix,vx}-gdb.exp: Look for "Quit anyway.*?" - not just "Quit anyway?". - -Tue May 18 17:13:20 1993 Fred Fish (fnf@cygnus.com) - - * gdb.t21/demangle.exp: Add a couple of new patterns. Ensure - that all setup_xfails are immediately followed by clear_xfails. - -Tue May 11 09:10:47 1993 Fred Fish (fnf@cygnus.com) - - * config/unix-gdb.exp, gdb.t00/echo.exp, gdb.t00/help.exp, - gdb.t00/teststrategy.exp, gdb.t00/gdbvars.exp, gdb.t01/run.exp, - gdb.t01/term.exp, gdb.t02/whatis.exp, gdb.t03/ptype.exp, - gdb.t04/setvar.exp, gdb.t05/expr.exp, gdb.t06/break.exp, - gdb.t07/watchpoint.exp, gdb.t08/opaque.exp, gdb.t09/corefile.exp, - gdb.t10/crossload.exp, gdb.t11/list.exp, gdb.t12/scope.exp, - gdb.t13/bitfields.exp, gdb.t15/funcargs.exp, gdb.t16/printcmds.exp, - gdb.t17/callfuncs.exp, gdb.t20/misc.exp, gdb.t20/inherit.exp, - gdb.t20/classes.exp, gdb.t21/demangle.exp, gdb.t21/cplusfuncs.exp, - gdb.t22/virtfunc.exp, gdb.t23/templates.exp, gdb.t30/chexp.exp, - gdb.t31/chillvars.exp, lib/gdb.exp: - Change place to report bugs from bug-dejagnu@prep.ai.mit.edu to - bug-gdb@prep.ai.mit.edu. - -Fri May 7 09:15:35 1993 Fred Fish (fnf@cygnus.com) - - * gdb.t17/callfuncs.exp (do_function_calls): Call t_double_values - with 0.0, not integer 0. - -Fri Apr 30 13:17:24 1993 Jim Kingdon (kingdon@cygnus.com) - - * gdb.t06/break.exp: Update for "Kill the program" message change. - -Fri Apr 30 09:42:57 1993 Fred Fish (fnf@cygnus.com) - - * Makefile.in (GDBFLAGS): Set to -nx. - * Makefile.in (site.exp): Use GDBFLAGS. - -Wed Apr 28 13:19:07 1993 K. Richard Pixley (rich@rtl.cygnus.com) - - * */Makefile.in (CFLAGS): add CFLAGS = -g to all subdirectory - Makefiles. - (check): depend on just-check. - (just-check): added so that tests can be run without a noop - build pass. - -Fri Apr 23 18:13:28 1993 K. Richard Pixley (rich@rtl.cygnus.com) - - Switch to using configure's configdirs. - * Makefile.in (Makefile): add configure.in dependency. - (SUBDIRS): removed redundant assignment. - * configure.in: switch subdirs assignment to configdirs. - * gdb.t*/configure.in: new files. - -Thu Apr 22 08:27:53 1993 Ian Lance Taylor (ian@cygnus.com) - - * gdb.t07/watchpoint.exp: Removed a29k expected failure which now - works. - -Tue Apr 20 13:38:40 1993 Fred Fish (fnf@cygnus.com) - - * gdb.{t20,t21,t22,t23}/Makefile.in: Use $(srcdir) to avoid $< - in explicit rules. Apparently this is not supported by some makes. - -Mon Apr 19 01:54:53 1993 John Gilmore (gnu@cygnus.com) - - * gdb.t31/Makefile.in: Use $(srcdir) when avoiding $<, sigh. - -Fri Apr 16 09:33:46 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * config/unix-gdb.exp: Add back missing return 0 which mysteriously - disappeared. - -Thu Apr 15 02:28:24 1993 John Gilmore (gnu@cacophony.cygnus.com) - - * gdb.t31/Makefile.in: Avoid $< in explicit rule. - -Wed Apr 14 16:38:47 1993 Fred Fish (fnf@cygnus.com) - - * gdb.t07/watchpoint.exp: Remove setup_xfail for i486 - watchpoint problem that is now fixed. - * gdb.t30/chexp.exp: Remove setup_xfail for printing - uninitialized convenience variables. - * gdb.t31/chillvars.exp: Fix expected patterns for printing - structures. - -Wed Apr 14 12:55:58 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.t00/help.exp: Compensate for bug in mips-*-ultrix* OS - which causes expect to get out of sync with gdb on long output - from help set. - * gdb.t09/corefile.exp: Make expected pattern for core file - failing signal and frame output format less sun specific. - -Tue Apr 13 23:18:07 1993 Per Bothner (bothner@cygnus.com) - - * gdb.t31/chillvars.exp: Add and remove initial dummy - breakpoint, so that symbol table is forced in. - (Needed at least on Sunos4, though it seems not SVR4.) - * gdb.t31/chillvars.exp: Update for changed output format. - -Sun Apr 11 17:21:45 1993 Rob Savoye (rob at darkstar.cygnus.com) - - * config/unix-gdb.exp: Gracefully exits if $GDB is a bogus path. - -Wed Apr 7 21:28:21 1993 Rob Savoye (rob@cygnus.com) - - * Makefile.in: Added --srcdir when invoking runtest, removed the - need for a local config file. (optional now) - -Wed Apr 7 14:13:41 1993 Fred Fish (fnf@cygnus.com) - - * gdb.t21/demangle.exp: Only count real fails (not xfails) for - failure count used to force early termination. Add some more - expected failures for gnu style demangling. - -Thu Apr 1 09:50:30 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * Makefile.in (CXXFLAGS): Remove -O. It caused the debug info for the - pmi variable from gdb.t20/gdbme to get optimized away. - * gdb.t00/teststrategy.exp: Added expected failure for mips-*-*. - Check for written corefile upon timeout _and_ eof. - -Tue Mar 30 09:58:16 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * config/unix-gdb.exp: Add missing return 0. - -Tue Mar 30 08:34:25 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdb.t16/printcmds.exp: Remove misplaced xfail that caused an early - test termination. - -Mon Mar 29 17:37:25 1993 Fred Fish (fnf@cygnus.com) - - * configure.in (subdirs): Put back gdb.t17 which mysteriously - disappeared. - -Thu Mar 25 21:05:16 1993 Fred Fish (fnf@cygnus.com) - - * gdb.t10/crossload.exp: Disable the i860-elf test until such - time as i860 support works. - - * gdb.t15/funcargs.exp: Fix expected outputs to include - "backtrace 100\r" rather than just "backtrace\r", to match last - change. - -Thu Mar 25 12:14:28 1993 Ian Lance Taylor (ian@cygnus.com) - - * config/udi-gdb.exp (gdb_exit): Remove close command. - (gdb_target_udi): New procedure to set the UDI target. - (gdb_start): Don't remove *_soc files. Use gdb_target_udi. - * gdb.t00/default.exp: Added expected failures for a29k-*-udi. - Added waits for prompts after several question responses. Added - some more responses used by a29k-amd-udi-gdb. - * gdb.t01/run.exp, gdb.t06/break.exp: Added a29k-*-udi support: - pass different arguments, restart UDI connection after program - completion. - * gdb.t02/whatis.exp, gdb.t03/ptype.exp, gdb.t07/watchpoint.exp, - gdb.t08/opaque.exp, gdb.t11/list.exp, gdb.t12/scope.exp, - gdb.t15/funcargs.exp, gdb.t16/printcmds.exp, gdb.t20/misc.exp, - gdb.t21/cplusfuncs.exp: Added expected failures for a29k-*-*. - * gdb.t04/setvar.exp, gdb.t05/expr.exp, gdb.t07/watchpoint.exp, - gdb.t08/opaque.exp, gdb.t12/scope.exp, gdb.t13/bitfields.exp, - gdb.t15/funcargs.exp, gdb.t16/printcmds.exp, - gdb.t17/callfuncs.exp, gdb.t20/classes.exp, gdb.t20/inherit.exp, - gdb.t20/misc.exp, gdb.t22/virtfuncs.exp: Restart UDI connection - after program completion. - * gdb.t10/crossload.exp: Does not work for a29k-*-*, since BFD is - compiled with a SELECT_VECS setting. - * gdb.t15/funcargs.exp: Use argument to backtrace to prevent - infinite recursion. - - * gdb.t20/classes.exp, gdb.t20/inherit.exp, gdb.t22/virtfuncs.exp: - Added checks for COFF results, and made them expected failures for - all targets. It would be better to make them expected failures - for COFF targets only. - -Wed Mar 24 14:43:38 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com) - - * Makefile.in: add null dvi target, don't bother to recurse - through test directories for info and install-info; rename - $(datadir) to be dejagnu instead of deja-gnu - -Wed Mar 24 09:48:03 1993 Fred Fish (fnf@cygnus.com) - - * gdb.t31/gdbme.ch: Re-enable code that previously caused - compiler to coredump. - * gdb.t31/chillvars.exp: Re-enable tests that depend on that - code. - -Tue Mar 23 08:53:42 1993 Fred Fish (fnf@cygnus.com) - - * gdb.t31/gdbme.ch: Comment out code that causes chill compiler - coredump. - * gdb.t31/chillvars.exp: Comment out tests that depend on that - code. - -Sun Mar 21 17:56:47 1993 Rob Savoye (rob at darkstar.cygnus.com) - - * gdb.t03/ptype.exp: tests for return code from gdb_test. - * gdb.t00/teststrategy.exp: Uses which proc rather than spawning - which in a shell. Deletes xgdb when done. - * config/unix-gdb.exp: Won't try to spawn $GDB unless it exists. - Tests the return from the "set height" or "set width" commands. - Added a few return codes where needed. - -Wed Mar 17 11:31:01 1993 Fred Fish (fnf@cygnus.com) - - * Makefile.in (SUBDIRS): Add gdb.t17. - * configure.in (subdirs): Add gdb.t17. - * gdb.t17/{Makefile.in, callfuncs.exp, gdbme.c}: New test - files to test gdb's calling of functions in the inferior with - the correct arguments and gdb's ability to retrieve any - result returned. - -Tue Mar 16 15:37:11 1993 Fred Fish (fnf@cygnus.com) - - * config/unix-gdb.exp (gdb_exit): Remove close commands that - may be called after gdb goes away. Previous versions of expect - needed these to avoid file descriptor leaks, but they cause - errors with the current revision of expect. - * gdb.t00/gdbvars.exp: Use -re on expected output after - setting sevenbit-strings. - * gdb.t04/setvar.exp, gdb.t13/bitfields.exp: Make commands - to set sevenbit-strings consistent across tests. - gdb.t30/chexp.exp, gdb.t31/chillvars.exp: Make commands to - set sevenbit-strings consistent across tests. - -Fri Mar 12 08:47:20 1993 Fred Fish (fnf@cygnus.com) - - * gdb.t21/demangle.exp (proc demangle): Adjust quotes in an - expected output to match current "expect" expectations. - -Wed Mar 10 18:01:49 1993 Fred Fish (fnf@cygnus.com) - - * gdb.t00/default.exp: Change expected output for default "source" - command, to match new gdb behavior which requires a filename to - source. - -Tue Mar 9 11:00:56 1993 Fred Fish (fnf@cygnus.com) - - * gdb.t07/watchpoint.exp (test_simple_watchpoint): Set up - expected fail for i486-*-* that misses the marker2 function. - * gdb.t10/crossload.exp (bfddefault): Allow successful - recognition of a format to pass even if no symbols are found. - Explicitly catch failures where the format is not recognized - or is ambiguous, and add the reason to the fail message. - * gdb.t10/crossload.exp (bfdexplicit): Catch failure where - the cause is and invalid target and add reason to failure message. - * gdb.t10/crossload.exp: Fix bfd target names for elf32-m68k, - elf32-i386, elf32-sparc, and elf32-i860. - * gdb.t12/scope.exp (test_at_main, test_at_foo, test_at_bar): - Set up expected failure for 'filename'::variable scope resolution, - which is now apparently broken on all targets. - * gdb.t20/classes.exp, gdb.t20/inherit.exp, gdb.t20/misc.exp, - gdb.t21/cplusfuncs.exp, gdb.t22/virtfunc.exp, - gdb.t23/templates.exp: Change failure for missing binfile into - just a warning. - gdb.t21/demangle.exp: Change all cfront references to 'arm' - references. - -Mon Mar 8 19:20:28 1993 Fred Fish (fnf@cygnus.com) - - * gdb.t00/default.exp: Add expected output for default "source" - command, to match new gdb behavior. - * gdb.t09/corefile.exp: Use GDBFLAGS when spawning GDB. - -Sun Mar 7 15:14:09 1993 Rob Savoye (rob@cygnus.com) - - * config/*-gdb.exp: returns an error, rather than exiting on - internal errors. - -Tue Mar 2 18:09:32 1993 Fred Fish (fnf@cygnus.com) - - * gdb.t03/gdbme.c: Add pointer to struct variable. - * gdb.t03/ptype.exp: Test equivalence of '.' and '->' for - referencing struct members. - -Thu Feb 25 10:39:06 1993 Ian Lance Taylor (ian@cygnus.com) - - * configure.in (mips-idt-ecoff): New target. - * config/mips-gdb.exp: New file for remote board using MIPS remote - debugging protocol. - - * Redid configuration scheme. Removed gdb.t*/configure.in. - Renamed gdb.t*/in-gdbme* to gdb.t*/gdbme*. Changed to use CC, CXX - instead of CC_FOR_TARGET, CXX_FOR_TARGET. Added mostlyclean and - distclean targets. Built executables via .o files. Adjusted - tests to account for source files in $(srcdir) rather than - $(objdir). - * lib/gdb.exp (runto): Don't expect () after the function name, - because it may have arguments. - -Wed Feb 24 08:05:38 1993 Ian Lance Taylor (ian@cygnus.com) - - * gdb.t00/default.exp, gdb.t01/run.exp, gdb.t02/whatis.exp, - gdb.t03/ptype.exp, gdb.t06/break.exp, gdb.t12/scope.exp: Added - expected failures for mips-idt-* and mips-sgi-*. - * gdb.t00/default.exp (attach): Kill process if requested. - * gdb.t00/help.exp (help target core, help target): Accept a gdb - that does not read core files. - * gdb.t01/run.exp: Removed checks for exit status code. - * gdb.t03/in-gdbme.c: Make explicit call to malloc to ensure that - it is linked in. - * gdb.t03/ptype.exp: Increase timeout when calling malloc. - * gdb.t04/setvar.exp, gdb.t05/expr.exp: Use runto function where - appropriate, rather than doing it by hand. - * gdb.t07/watchpoint.exp: If mips-idt-*, reload file after first - execution. - * gdb.t10/crossload.exp: Kill existing program if needed. - * gdb.t15/funcargs.exp: Use delete_breakpoints function where - appropriate, rather than doing it by hand. Always increase - timeout for this test, not just for VxWorks. - -Wed Feb 24 08:03:38 1993 Fred Fish (fnf@cygnus.com) - - * gdb.t31/chillvars.exp (test_structs): New proc to test printing - of Chill STRUCT types and STRUCT values. - * gdb.t31/chillvars.exp (test_strings): Expect "CHAR" now, rather - than "char". - * gdb.t31/in-gdbme.ch (simple_struct, nested_struct, struct1, - struct2): New struct definitions and initializations to test - simple Chill STRUCT types. - -Tue Feb 23 11:55:06 1993 Fred Fish (fnf@cygnus.com) - - * gdb.t00/teststrategy.exp: Track reversion in gdb to not print - the null byte at the end of strings. - * gdb.t00/default.exp: Make show version insensitive to copyright - date. - * gdb.t16/in-gdbme.c (ctable1, ctable2): Make explicitly unsigned - to avoid dependencies on target char signedness. - * gdb.t16/printcmds.exp: Update expected results for explicitly - unsigned char. - * gdb.t16/printcmds.exp: Remove setup_xfails for i960 that should - now work. - * gdb.t21/demangle.exp: Add many more patterns for template - demangling, most of them being expected failures. - * gdb.t21/demangle.exp (proc demangle): Quote the demangled - string we are matching for, to match on the whole string. - * gdb.t21/demangle.exp: Add many new test strings to demangle, - and fix a whole bunch that had incorrect expected output but were - passing anyway because of the bug in "proc demangle". - * gdb.t31/chillvars.exp: Remove setup_xfail for printing string - type. - * gdb.t31/in-gdbme.ch: Uncomment string4, now compiles. - -Mon Feb 22 07:54:03 1993 Mike Werner (mtw@poseidon.cygnus.com) - - * gdb/testsuite: made modifications to testcases, etc., to allow - them to work properly given the reorganization of deja-gnu and the - relocation of the testcases from deja-gnu to a "tool" subdirectory. - -Sun Feb 21 10:55:55 1993 Mike Werner (mtw@poseidon.cygnus.com) - - * gdb/testsuite: Initial creation of gdb/testsuite. - Migrated dejagnu testcases and support files for testing nm to - gdb/testsuite from deja-gnu. These files were moved "as is" - with no modifications. This migration is part of a major overhaul - of dejagnu. The modifications to these testcases, etc., which - will allow them to work with the new version of dejagnu will be - made in a future update. - -Local Variables: -mode: indented-text -left-margin: 8 -fill-column: 74 -version-control: never -End: |