diff options
Diffstat (limited to 'gdb/testsuite/config/monitor.exp')
| -rw-r--r-- | gdb/testsuite/config/monitor.exp | 271 |
1 files changed, 0 insertions, 271 deletions
diff --git a/gdb/testsuite/config/monitor.exp b/gdb/testsuite/config/monitor.exp deleted file mode 100644 index c0fb464fb95..00000000000 --- a/gdb/testsuite/config/monitor.exp +++ /dev/null @@ -1,271 +0,0 @@ -# Test Framework Driver for GDB driving a ROM monitor (via monitor.c). -# Copyright 1995, 1996, 1997, 1998, 1999, 2000 -# Free Software Foundation, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - -load_lib gdb.exp -# puts "***** DID USE MONITOR ******" - -# -# gdb_target_cmd -# Send gdb the "target" command -# -proc gdb_target_cmd { targetname serialport } { - global gdb_prompt - - for {set i 1} {$i <= 3} {incr i} { - send_gdb "target $targetname $serialport\n" - gdb_expect 60 { - -re "A program is being debugged already.*ill it.*y or n. $" { - send_gdb "y\n"; - exp_continue; - } - -re "Couldn't establish connection to remote.*$gdb_prompt" { - verbose "Connection failed"; - } - -re "Remote MIPS debugging.*$gdb_prompt" { - verbose "Set target to $targetname"; - return 0; - } - -re "Remote debugging using .*$serialport.*$gdb_prompt" { - verbose "Set target to $targetname"; - return 0; - } - -re "Remote target $targetname connected to.*$gdb_prompt" { - verbose "Set target to $targetname"; - return 0; - } - -re "Connected to.*$gdb_prompt" { - verbose "Set target to $targetname"; - return 0; - } - -re "Ending remote.*$gdb_prompt" { } - -re "Connection refused.*$gdb_prompt" { - verbose "Connection refused by remote target. Pausing, and trying again." - sleep 30 - continue - } - -re "Timeout reading from remote system.*$gdb_prompt" { - verbose "Got timeout error from gdb."; - } - timeout { - send_gdb ""; - break - } - } - } - return 1 -} - - - -# -# gdb_target_monitor -# Set gdb to target the monitor -# -proc gdb_target_monitor { exec_file } { - global gdb_prompt - global exit_status - global timeout - - if [target_info exists gdb_protocol] { - set targetname "[target_info gdb_protocol]" - } else { - perror "No protocol specified for [target_info name]."; - return -1; - } - if [target_info exists baud] { - gdb_test "set remotebaud [target_info baud]" "" "" - } - if [target_info exists binarydownload] { - gdb_test "set remotebinarydownload [target_info binarydownload]" "" "" - } - if { [ target_info exists disable_x_packet ] } { - gdb_test "set remote X-packet disable" "" - } - if { [ target_info exists disable_z_packet ] } { - gdb_test "set remote Z-packet disable" "" - } - if [target_info exists gdb_serial] { - set serialport "[target_info gdb_serial]"; - } elseif [target_info exists netport] { - set serialport "[target_info netport]" - } else { - set serialport "[target_info serial]" - } - - for {set j 1} {$j <= 2} {incr j} { - if [gdb_file_cmd $exec_file] { return -1; } - - if ![gdb_target_cmd $targetname $serialport] { return 0; } - - gdb_target_exec; - - if { $j == 1 && ![reboot_target] } { - break; - } - } - - perror "Couldn't set target for $targetname, port is $serialport."; - return -1; -} - -proc gdb_target_exec { } { - gdb_test "target exec" "No executable file now." "" ".*Kill it.*y or n.*" "y" - -} -# -# gdb_load -- load a file into the debugger. -# return a -1 if anything goes wrong. -# -proc gdb_load { arg } { - global verbose - global loadpath - global loadfile - global GDB - global gdb_prompt - global timeout - global last_gdb_file; - - if [target_info exists gdb_download_size] { - send_gdb "set download-write-size [target_info gdb_download_size]\n"; - gdb_expect 30 { - -re "$gdb_prompt $" { } - default { - perror "Setting download-write-size for target failed"; - return -1; - } - } - } - - if { $arg == "" } { - if [info exists last_gdb_file] { - set arg $last_gdb_file; - } else { - send_gdb "info files\n"; - gdb_expect 30 { - -re "Symbols from \"(\[^\"\]+)\"" { - set arg $expect_out(1,string); - exp_continue; - } - -re "Local exec file:\[\r\n\]+\[ \t\]*`(\[^'\]+)'," { - set arg $expect_out(1,string); - exp_continue; - } - -re "$gdb_prompt $" { } - } - } - } - - set last_gdb_file $arg; - - for { set j 1; } { $j <= 2 } {incr j; } { - if [target_info exists gdb,use_standard_load] { - gdb_target_exec; - if ![target_info exists gdb,no_push_conn] { - remote_push_conn host; - } - set state [remote_ld target $arg]; - if ![target_info exists gdb,no_push_conn] { - remote_close target; - remote_pop_conn host; - } - if { $state == "pass" } { - if [gdb_target_monitor $arg] { return -1; } - gdb_test "list main" ".*" "" - verbose "Loaded $arg into $GDB\n"; - return 0; - } - } else { - - if [gdb_target_monitor $arg] { return -1 } - - if [is_remote host] { - # FIXME: Multiple downloads. bleah. - set farg [remote_download host $arg]; - } else { - set farg $arg; - } - - if { $arg != "" && [target_info exists gdb_sect_offset] } { - set textoff [target_info gdb_sect_offset]; - send_gdb "sect .text $textoff\n"; - gdb_expect 30 { - -re "(0x\[0-9a-z]+) - 0x\[0-9a-z\]+ is \\.data" { - set dataoff $expect_out(1,string); - exp_continue; - } - -re "(0x\[0-9a-z\]+) - 0x\[0-9a-z\]+ is \\.bss" { - set bssoff $expect_out(1,string); - exp_continue; - } - -re "$gdb_prompt" { } - } - set dataoff [format 0x%x [expr $dataoff + $textoff]]; - set bssoff [format 0x%x [expr $bssoff + $textoff]]; - send_gdb "sect .data $dataoff\n"; - gdb_expect 30 { - -re "$gdb_prompt" { } - } - send_gdb "sect .bss $bssoff\n"; - gdb_expect 30 { - -re "$gdb_prompt" { } - } - } - - verbose "Loading $farg" - if [target_info exists gdb_load_offset] { - set command "load $farg [target_info gdb_load_offset]\n"; - } else { - set command "load $farg\n"; - } - if [target_info exists gdb_load_timeout] { - set loadtimeout [target_info gdb_load_timeout] - } else { - set loadtimeout 1600 - } - - send_gdb $command; - gdb_expect $loadtimeout { - -re "\[Ff\]ailed.*$gdb_prompt $" { - verbose "load failed"; - } - -re "Timeout reading from remote.*$gdb_prompt" { - } - -re "$gdb_prompt $" { - verbose "Loaded $farg into $GDB\n" - return 0; - } - timeout { - if { $verbose > 1 } { - perror "Timed out trying to load $farg." - } - } - } - } - - # Make sure we don't have an open connection to the target. - gdb_target_exec; - - if { $j == 1 } { - if { ![reboot_target] } { - break; - } - } - } - perror "Couldn't load file into GDB."; - return -1; -} |