diff options
Diffstat (limited to 'gdb/testsuite/gdb.asm/asm-source.exp')
| -rw-r--r-- | gdb/testsuite/gdb.asm/asm-source.exp | 231 |
1 files changed, 0 insertions, 231 deletions
diff --git a/gdb/testsuite/gdb.asm/asm-source.exp b/gdb/testsuite/gdb.asm/asm-source.exp deleted file mode 100644 index fbcfa7cff50..00000000000 --- a/gdb/testsuite/gdb.asm/asm-source.exp +++ /dev/null @@ -1,231 +0,0 @@ -# Copyright 1998, 2000 Free Software Foundation, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# Please email any bugs, comments, and/or additions to this file to: -# bug-gdb@prep.ai.mit.edu -# -# This file was written by Kendra. - -if $tracelevel then { - strace $tracelevel -} - -# -# Test debugging assembly level programs. -# This file uses asmsrc[12].s for input. -# - -set prms_id 0 -set bug_id 0 - -set asm-arch "" -set asm-flags "" -set link-flags "" - -if [istarget "*arm-*-*"] then { - set asm-arch arm -} -if [istarget "xscale-*-*"] then { - set asm-arch arm -} -if [istarget "d10v-*-*"] then { - set asm-arch d10v -} -if [istarget "s390-*-*"] then { - set asm-arch s390 -} -if [istarget "i\[3456\]86-*-*"] then { - set asm-arch i386 -} -if [istarget "m32r*-*"] then { - set asm-arch m32r -} -if [istarget "sparc-*-*"] then { - set asm-arch sparc -} -if [istarget "xstormy16-*-*"] then { - set asm-arch xstormy16 - set asm-flags "-gdwarf2 -I${srcdir}/${subdir} -I${objdir}/${subdir}" -} -if { "${asm-arch}" == "" } { - gdb_suppress_entire_file "Assembly source test -- not implemented for this target." -} - -set testfile "asm-source" -set binfile ${objdir}/${subdir}/${testfile} -set src1 ${srcdir}/${subdir}/asmsrc1.s -set src2 ${srcdir}/${subdir}/asmsrc2.s - -if { "${asm-flags}" == "" } { - #set asm-flags "-Wa,-gstabs,-I${srcdir}/${subdir},-I${objdir}/${subdir}" - set asm-flags "-gstabs -I${srcdir}/${subdir} -I${objdir}/${subdir}" -} - -if {[target_assemble ${src1} asmsrc1.o "${asm-flags}"] != ""} then { - gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." -} -if {[target_assemble ${src2} asmsrc2.o "${asm-flags}"] != ""} then { - gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." -} - -set opts "debug ldflags=-nostartfiles" -foreach i ${link-flags} { - append opts " ldflags=$i" -} -if { [gdb_compile "asmsrc1.o asmsrc2.o" "${binfile}" executable $opts] != "" } { - gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." -} - -remote_exec build "mv asmsrc1.o asmsrc2.o ${objdir}/${subdir}" - - -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} - -# -# Run to `main' where we begin our tests. -# - -if ![runto_main] then { - gdb_suppress_tests -} - -# Execute the `f' command and see if the result includes source info. -gdb_test "f" "asmsrc1\[.\]s:29.*several_nops" "f at main" - -# See if we properly `next' over a macro with several insns. -gdb_test "n" "33\[ \]*.*foo2" "next over macro" - -# See if we can properly `step' into a subroutine call. -gdb_test "s" "8\[ \]*.*" "step into foo2" - -# Test 'info target', and incidentally capture the entry point address. -set entry_point 0 -send_gdb "info target\n" -gdb_expect { - -re "Symbols from .*asm-source.*Entry point: 0x(\[01232456789abcdefABCDEF\]+).*$gdb_prompt $" { - set entry_point $expect_out(1,string) - pass "info target" - } - -re ".*$gdb_prompt $" { - fail "info target" - } - timeout { - fail "info target (timeout)" - } -} - -# Capture the start symbol (may be '_start' or 'start') -set entry_symbol "" -send_gdb "info symbol 0x$entry_point\n" -gdb_expect { - -re "info symbol 0x$entry_point\[\r\n\]+(\[^\r\n\]*) in section .*$gdb_prompt $" { - # We match the echoed `info symbol' command here, to help us - # reliably identify the beginning of the start symbol in the - # command's output. You might think we could just use '^' to - # start matching at the beginning of the line, but - # unfortunately, in Expect, '^' matches the beginning of the - # input that hasn't been matched by any expect clause yet. If - # every expect clause consumes a complete line, along with its - # terminating CR/LF, this is equivalent to the beginning of a - # line. But expect clauses that end with `.*' will consume as - # much as happened to arrive from the TTY --- exactly where - # they leave you depends on inter-process timing. :( - set entry_symbol $expect_out(1,string) - pass "info symbol" - } - -re ".*$gdb_prompt $" { - fail "info symbol" - } - timeout { - fail "info symbol (timeout)" - } -} - -# Now try a 'list' from the other source file. -gdb_test "list $entry_symbol" ".*gdbasm_startup.*" "list" - -# Now try a source file search -gdb_test "search A routine for foo2 to call" \ - "39\[ \t\]+comment \"A routine for foo2 to call.\"" "search" - -# See if `f' prints the right source file. -gdb_test "f" ".*asmsrc2\[.\]s:8.*" "f in foo2" - -# `next' one insn (or macro) to set up our stackframe (for the following bt). -gdb_test "n" "12\[ \]*.*foo3" "n in foo2" - -# See if a simple `bt' prints the right source files and -# doesn't fall off the stack. - -gdb_test "bt 10" \ - "\#0.*foo2.*asmsrc2\[.\]s:12.*\#1.*main.*asmsrc1\[.\]s:33(.*\#2.*start\[^\r\n\]*)?" \ - "bt ALL in foo2" - -# See if a capped `bt' prints the right source files. -gdb_test "bt 2" "\#0.*foo2.*asmsrc2\[.\]s:12.*\#1.*main.*asmsrc1\[.\]s:33.*" "bt 2 in foo2" - -# Step into another subroutine which lives back in the first source file. -gdb_test "s" "" "s 2" - -# Next over insns to set up the stack frame. -gdb_test "n" "" "n 2" - -# Now see if a capped `bt' is correct. -gdb_test "bt 3" "\#0.*foo3.*asmsrc1\[.\]s:44.*\#1.*foo2.*asmsrc2\[.\]s:12.*\#2.*main.*asmsrc1\[.\]s:33.*" "bt 3 in foo3" - -# Try 'info source' from asmsrc1.s -gdb_test "info source" \ - "Current source file is .*asmsrc1.s.*Source language is asm.*" \ - "info source asmsrc1.s" - -# Try 'finishing' from foo3 -gdb_test "finish" "Run till exit from.*\[\r\n\]13\[ \t\]+gdbasm_call foo3" \ - "finish from foo3" - -# Try 'info source' from asmsrc2.s -gdb_test "info source" \ - "Current source file is .*asmsrc2.s.*Source language is asm.*" \ - "info source asmsrc2.s" - -# Try 'info sources' -gdb_test "info sources" \ - "Source files .*asmsrc\[12\].s.*asmsrc\[12\].s.*" \ - "info sources" - -# Try 'info line' -gdb_test "info line" \ - "Line 13 of.*asmsrc2.s.*starts at.*<foo2+.*> and ends at.*<foo2+.*>." \ - "info line" - -# Try 'nexting' over next call to foo3 -gdb_test "next" "17\[ \t\]+gdbasm_leave" "next over foo3" - -# Try 'return' from foo2 -gdb_test "return" "\#0 main .*37\[ \t\]+gdbasm_exit0" "return from foo2" \ - "Make selected stack frame return now\?.*" "y" - -# See if we can look at a global variable -gdb_test "print globalvar" ".* = 11" "look at global variable" - -# See if we can look at a static variable -gdb_test "print staticvar" ".* = 5" "look at static variable" - -# See if we can look at a static function -gdb_test "disassem foostatic" ".*<foostatic>:.*End of assembler dump." \ - "look at static function" - |