diff options
Diffstat (limited to 'gdb/testsuite/gdb.mi/mi0-simplerun.exp')
| -rw-r--r-- | gdb/testsuite/gdb.mi/mi0-simplerun.exp | 201 |
1 files changed, 0 insertions, 201 deletions
diff --git a/gdb/testsuite/gdb.mi/mi0-simplerun.exp b/gdb/testsuite/gdb.mi/mi0-simplerun.exp deleted file mode 100644 index 9113e1fa30b..00000000000 --- a/gdb/testsuite/gdb.mi/mi0-simplerun.exp +++ /dev/null @@ -1,201 +0,0 @@ -# Copyright 1999, 2000 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - -# Please email any bugs, comments, and/or additions to this file to: -# bug-gdb@prep.ai.mit.edu - -# -# Test essential Machine interface (MI) operations -# -# Verify that, using the MI, we can run a simple program and perform basic -# debugging activities like: insert breakpoints, run the program, -# step, next, continue until it ends and, last but not least, quit. -# -# The goal is not to test gdb functionality, which is done by other tests, -# but to verify the correct output response to MI operations. -# - -load_lib mi-support.exp -set MIFLAGS "-i=mi0" - -gdb_exit -if [mi_gdb_start] { - continue -} - -set testfile "basics" -set srcfile ${testfile}.c -set binfile ${objdir}/${subdir}/${testfile} -if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-DFAKEARGV}] != "" } { - gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." -} - -mi_delete_breakpoints -mi_gdb_reinitialize_dir $srcdir/$subdir -mi_gdb_reinitialize_dir $srcdir/$subdir -mi_gdb_load ${binfile} - -proc test_breakpoints_creation_and_listing {} { - global mi_gdb_prompt - global srcfile - global hex - - # Insert some breakpoints and list them - # Also, disable some so they do not interfere with other tests - # Tests: - # -break-insert - # -break-list - # -break-disable - # -break-info - - mi_gdb_test "200-break-insert main" \ - "200\\^done,bkpt=\{number=\"1\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"main\",file=\".*basics.c\",line=\"32\",times=\"0\"\}" \ - "break-insert operation" - - mi_gdb_test "201-break-insert basics.c:callee2" \ - "201\\^done,bkpt=\{number=\"2\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"callee2\",file=\".*basics.c\",line=\"22\",times=\"0\"\}" \ - "insert breakpoint at basics.c:callee2" - - mi_gdb_test "202-break-insert basics.c:15" \ - "202\\^done,bkpt=\{number=\"3\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"callee3\",file=\".*basics.c\",line=\"15\",times=\"0\"\}" \ - "insert breakpoint at basics.c:15 (callee3)" - - mi_gdb_test "203-break-insert \"\\\"${srcfile}\\\":6\"" \ - "203\\^done,bkpt=\{number=\"4\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"callee4\",file=\".*basics.c\",line=\"6\",times=\"0\"\}" \ - "insert breakpoint at \"<fullfilename>\":6 (callee4)" - - mi_gdb_test "204-break-list" \ - "204\\^done,BreakpointTable=\{hdr=\{.*\},bkpt=\{number=\"1\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"main\",file=\".*basics.c\",line=\"32\",times=\"0\"\},.*\}\}" \ - "list of breakpoints" - - mi_gdb_test "205-break-disable 2 3 4" \ - "205\\^done.*" \ - "disabling of breakpoints" - - mi_gdb_test "206-break-info 2" \ - "206\\^done,BreakpointTable=\{hdr=\{.*\},bkpt=\{number=\"2\",.*,enabled=\"n\",.*\}\}" \ - "list of breakpoints, 16 disabled" -} - -proc test_running_the_program {} { - global mi_gdb_prompt - global hex - - # Run the program without args, then specify srgs and rerun the program - # Tests: - # -exec-run - # -gdb-set - - # mi_gdb_test cannot be used for asynchronous commands because there are - # two prompts involved and this can lead to a race condition. - # The following is equivalent to a send_gdb "000-exec-run\n" - mi_run_cmd - gdb_expect { - -re "000\\*stopped,reason=\"breakpoint-hit\",bkptno=\"1\",thread-id=\"\[01\]\",frame=\{addr=\"$hex\",func=\"main\",args=\{\},file=\".*basics.c\",line=\"32\"\}\r\n$mi_gdb_prompt$" { - pass "run to main" - } - -re ".*$mi_gdb_prompt$" { - fail "run to main (2)" - } - timeout { - fail "run to main (timeout)" - } - } -} - -proc test_controlled_execution {} { - global mi_gdb_prompt - global hex - - # Continue execution until a breakpoint is reached, step into calls, verifying - # if the arguments are correctly shown, continue to the end of a called - # function, step over a call (next). - # Tests: - # -exec-continue - # -exec-next - # -exec-step - # -exec-finish - - # mi_gdb_test cannot be used for asynchronous commands because there are - # two prompts involved and this can lead to a race condition. - mi0_next_to "main" "" "basics.c" "33" "next at main" - - # FIXME: A string argument is not printed right; should be fixed and - # we should look for the right thing here. - # NOTE: The ``\\\\\"'' is for \". - mi0_step_to "callee1" \ - "\{name=\"intarg\",value=\"2\"\},\{name=\"strarg\",value=\"$hex \\\\\"A string argument\.\\\\\"\"\},\{name=\"fltarg\",value=\"3.5\"\}" \ - "basics.c" "27" "step at main" - - # FIXME: A string argument is not printed right; should be fixed and - # we should look for the right thing here. - mi0_run_to "exec-step 3" "end-stepping-range" "callee4" "" \ - "basics.c" "8" "" "step to callee4" - - # FIXME: A string argument is not printed right; should be fixed and - # we should look for the right thing here. - # NOTE: The ``.'' is part of ``gdb-result-var="$1"'' - mi0_finish_to "callee3" ".*" "basics.c" "18" ".1" "0" "exec-finish" -} - -proc test_controlling_breakpoints {} { - global mi_gdb_prompt - - # Enable, delete, set ignore counts in breakpoints - # (disable was already tested above) - # Tests: - # -break-delete - # -break-enable - # -break-after - # -break-condition - -} - -proc test_program_termination {} { - global mi_gdb_prompt - - # Run to completion: normal and forced - # Tests: - # -exec-abort - # (normal termination of inferior) - - # FIXME: "stopped" doesn't seem appropriate. - # mi_gdb_test cannot be used for asynchronous commands because there are - # two prompts involved and this can lead to a race condition. - send_gdb "999-exec-continue\n" - gdb_expect { - -re "999\\^running\r\n$mi_gdb_prompt" { - gdb_expect { - -re "999\\*stopped,reason=\"exited-normally\"\r\n$mi_gdb_prompt$" { - pass "continue to end" - } - -re ".*$mi_gdb_prompt$" {fail "continue to end (2)"} - timeout {fail "continue to end (timeout 2)"} - } - } - -re ".*$mi_gdb_prompt$" {fail "continue to end (1)"} - timeout {fail "continue to end (timeout 1)"} - } -} - -test_breakpoints_creation_and_listing -test_running_the_program -test_controlled_execution -test_controlling_breakpoints -test_program_termination - -mi_gdb_exit -return 0 |