2002-09-22 Nathanael Nerode <neroden@gcc.gnu.org>tcltk840-20020924-branchpointtcltk840-20020924-branch

	* Makefile.def: New file.
	* Makefile.tpl: New file.
	* Makefile.in: Generate from Makefile.tpl with 'autogen Makefile.def'.

	* configure.in: Minor rearrangement.  Simplify tests.

5 files changed, 1961 insertions, 33 deletions

diff --git a/ChangeLog b/ChangeLog
index 7da3a1aa14..da5b4bf6b1 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,11 @@
+2002-09-22  Nathanael Nerode  <neroden@gcc.gnu.org>
+
+	* Makefile.def: New file.
+	* Makefile.tpl: New file.
+	* Makefile.in: Generate from Makefile.tpl with 'autogen Makefile.def'.
+
+	* configure.in: Minor rearrangement.  Simplify tests.
+
 2002-09-23  Jason Thorpe  <thorpej@wasabisystems.com>
 
 	* configure.in (with_headers): Skip copy if value is "yes".
diff --git a/Makefile.def b/Makefile.def
new file mode 100644
index 0000000000..23771fc1bc
--- /dev/null
+++ b/Makefile.def
@@ -0,0 +1,65 @@
+#! /usr/bin/autogen
+AutoGen definitions Makefile.tpl;
+
+host_modules= { module= ash; };
+host_modules= { module= autoconf; };
+host_modules= { module= automake; };
+host_modules= { module= bash; };
+host_modules= { module= bfd; };
+// Put install-opcodes before install-binutils: should be Makefile dependency.
+host_modules= { module= opcodes; };
+host_modules= { module= binutils; };
+host_modules= { module= bison; no_check_cross= true; };
+host_modules= { module= byacc; no_check_cross= true; };
+host_modules= { module= bzip2; };
+host_modules= { module= db; };
+host_modules= { module= dejagnu; };
+host_modules= { module= diff; };
+host_modules= { module= dosutils; no_check= true; };
+host_modules= { module= etc; };
+host_modules= { module= fastjar; no_check_cross= true; };
+host_modules= { module= fileutils; };
+host_modules= { module= findutils; };
+host_modules= { module= find; };
+host_modules= { module= flex; no_check_cross= true; };
+host_modules= { module= gas; };
+host_modules= { module= gawk; };
+host_modules= { module= gettext; };
+host_modules= { module= gnuserv; };
+host_modules= { module= gprof; };
+host_modules= { module= grep; };
+host_modules= { module= gzip; };
+host_modules= { module= hello; };
+host_modules= { module= indent; };
+host_modules= { module= intl; };
+// Put install-tcl before install-itcl: should be Makefile dependency.
+host_modules= { module= tcl; };
+host_modules= { module= itcl; };
+host_modules= { module= ld; };
+host_modules= { module= libgui; };
+host_modules= { module= libiberty; };
+host_modules= { module= libtool; };
+host_modules= { module= m4; };
+host_modules= { module= make; };
+host_modules= { module= mmalloc; no_check=true; };
+host_modules= { module= patch; };
+host_modules= { module= perl; };
+host_modules= { module= prms; };
+host_modules= { module= rcs; };
+host_modules= { module= readline; };
+host_modules= { module= release; no_install= true; no_check= true; };
+host_modules= { module= recode; };
+host_modules= { module= sed; };
+host_modules= { module= send-pr; };
+host_modules= { module= shellutils; };
+host_modules= { module= sid; };
+host_modules= { module= sim; };
+host_modules= { module= snavigator; };
+host_modules= { module= tar; };
+host_modules= { module= texinfo; no_install= true; };
+host_modules= { module= textutils; };
+host_modules= { module= time; };
+host_modules= { module= uudecode; };
+host_modules= { module= wdiff; };
+host_modules= { module= zip; no_check_cross=true; };
+host_modules= { module= zlib; no_install=true; no_check=true; };
diff --git a/Makefile.in b/Makefile.in
index c37a5052d5..b1ff44ea79 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -1,3 +1,5 @@
+
+# Makefile.in is generated from Makefile.tpl by 'autogen Makefile.def'.
 #
 # Makefile for directory with subdirs to build.
 #   Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
@@ -529,6 +531,7 @@ ALL_MODULES = \
 	all-automake \
 	all-bash \
 	all-bfd \
+	all-opcodes \
 	all-binutils \
 	all-bison \
 	all-byacc \
@@ -553,6 +556,7 @@ ALL_MODULES = \
 	all-hello \
 	all-indent \
 	all-intl \
+	all-tcl \
 	all-itcl \
 	all-ld \
 	all-libgui \
@@ -561,7 +565,6 @@ ALL_MODULES = \
 	all-m4 \
 	all-make \
 	all-mmalloc \
-	all-opcodes \
 	all-patch \
 	all-perl \
 	all-prms \
@@ -576,7 +579,6 @@ ALL_MODULES = \
 	all-sim \
 	all-snavigator \
 	all-tar \
-	all-tcl \
 	all-texinfo \
 	all-textutils \
 	all-time \
@@ -605,6 +607,7 @@ CROSS_CHECK_MODULES = \
 	check-automake \
 	check-bash \
 	check-bfd \
+	check-opcodes \
 	check-binutils \
 	check-bzip2 \
 	check-db \
@@ -624,6 +627,7 @@ CROSS_CHECK_MODULES = \
 	check-hello \
 	check-indent \
 	check-intl \
+	check-tcl \
 	check-itcl \
 	check-ld \
 	check-libgui \
@@ -631,8 +635,6 @@ CROSS_CHECK_MODULES = \
 	check-libtool \
 	check-m4 \
 	check-make \
-	check-mmcheckoc \
-	check-opcodes \
 	check-patch \
 	check-perl \
 	check-prms \
@@ -642,11 +644,10 @@ CROSS_CHECK_MODULES = \
 	check-sed \
 	check-send-pr \
 	check-shellutils \
-	check-snavigator \
 	check-sid \
 	check-sim \
+	check-snavigator \
 	check-tar \
-	check-tcl \
 	check-texinfo \
 	check-textutils \
 	check-time \
@@ -669,11 +670,11 @@ INSTALL_MODULES = \
 	install-automake \
 	install-bash \
 	install-bfd \
-	install-bzip2 \
 	install-opcodes \
 	install-binutils \
 	install-bison \
 	install-byacc \
+	install-bzip2 \
 	install-db \
 	install-dejagnu \
 	install-diff \
@@ -831,6 +832,7 @@ CLEAN_MODULES = \
 	clean-automake \
 	clean-bash \
 	clean-bfd \
+	clean-opcodes \
 	clean-binutils \
 	clean-bison \
 	clean-byacc \
@@ -855,6 +857,7 @@ CLEAN_MODULES = \
 	clean-hello \
 	clean-indent \
 	clean-intl \
+	clean-tcl \
 	clean-itcl \
 	clean-ld \
 	clean-libgui \
@@ -863,7 +866,6 @@ CLEAN_MODULES = \
 	clean-m4 \
 	clean-make \
 	clean-mmalloc \
-	clean-opcodes \
 	clean-patch \
 	clean-perl \
 	clean-prms \
@@ -878,14 +880,13 @@ CLEAN_MODULES = \
 	clean-sim \
 	clean-snavigator \
 	clean-tar \
-	clean-tcl \
 	clean-texinfo \
 	clean-textutils \
 	clean-time \
 	clean-uudecode \
 	clean-wdiff \
 	clean-zip \
-	clean-zlib
+	clean-zlib 
 
 # All of the target modules that can be cleaned
 CLEAN_TARGET_MODULES = \
diff --git a/Makefile.tpl b/Makefile.tpl
new file mode 100644
index 0000000000..ba35aaa0ad
--- /dev/null
+++ b/Makefile.tpl
@@ -0,0 +1,1868 @@
+[+ AutoGen5 template
+in
++]
+
+# Makefile.in is generated from Makefile.tpl by 'autogen Makefile.def'.
+#
+# Makefile for directory with subdirs to build.
+#   Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
+#   1999, 2000, 2001, 2002 Free Software Foundation
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+
+# Tell GNU make 3.79 not to run the top level in parallel.  This 
+# prevents contention for $builddir/$target/config.cache, as well
+# as minimizing scatter in file system caches.
+NOTPARALLEL = .NOTPARALLEL
+$(NOTPARALLEL):
+
+srcdir = .
+
+prefix = /usr/local
+exec_prefix = $(prefix)
+
+bindir=${exec_prefix}/bin
+sbindir=${exec_prefix}/sbin
+libexecdir=${exec_prefix}/libexec
+datadir=${prefix}/share
+sysconfdir=${prefix}/etc
+sharedstatedir=${prefix}/com
+localstatedir=${prefix}/var
+libdir=${exec_prefix}/lib
+includedir=${prefix}/include
+oldincludedir=/usr/include
+infodir=${prefix}/info
+mandir=${prefix}/man
+gxx_include_dir=${includedir}/g++
+
+tooldir = $(exec_prefix)/$(target_alias)
+build_tooldir = $(exec_prefix)/$(target_alias)
+
+program_transform_name =
+
+man1dir = $(mandir)/man1
+man2dir = $(mandir)/man2
+man3dir = $(mandir)/man3
+man4dir = $(mandir)/man4
+man5dir = $(mandir)/man5
+man6dir = $(mandir)/man6
+man7dir = $(mandir)/man7
+man8dir = $(mandir)/man8
+man9dir = $(mandir)/man9
+infodir = $(prefix)/info
+includedir = $(prefix)/include
+# Directory in which the compiler finds executables, libraries, etc.
+libsubdir = $(libdir)/gcc-lib/$(target_alias)/$(gcc_version)
+GDB_NLM_DEPS = 
+
+SHELL = /bin/sh
+
+# pwd command to use.  Allow user to override default by setting PWDCMD in
+# the environment to account for automounters.  The make variable must not
+# be called PWDCMD, otherwise the value set here is passed to make
+# subprocesses and overrides the setting from the user's environment.
+PWD = $${PWDCMD-pwd}
+
+# INSTALL_PROGRAM_ARGS is changed by configure.in to use -x for a
+# cygwin host.
+INSTALL_PROGRAM_ARGS =
+
+INSTALL = $(SHELL) $$s/install-sh -c
+INSTALL_PROGRAM = $(INSTALL) $(INSTALL_PROGRAM_ARGS)
+INSTALL_SCRIPT = $(INSTALL)
+INSTALL_DATA = $(INSTALL) -m 644
+
+INSTALL_DOSREL = install-dosrel-fake
+
+AS = as
+AR = ar
+AR_FLAGS = rc
+CC = cc
+
+# Special variables passed down in EXTRA_GCC_FLAGS.  They are defined
+# here so that they can be overridden by Makefile fragments.
+HOST_CC = $(CC_FOR_BUILD)
+BUILD_PREFIX = 
+BUILD_PREFIX_1 = loser-
+
+# These flag values are normally overridden by the configure script.
+CFLAGS = -g
+CXXFLAGS = -g -O2
+
+LDFLAGS = 
+LIBCFLAGS = $(CFLAGS)
+CFLAGS_FOR_BUILD = $(CFLAGS)
+# During gcc bootstrap, if we use some random cc for stage1 then
+# CFLAGS will be just -g.  We want to ensure that TARGET libraries
+# (which we know are built with gcc) are built with optimizations so
+# prepend -O2 when setting CFLAGS_FOR_TARGET.
+CFLAGS_FOR_TARGET = -O2 $(CFLAGS)
+LDFLAGS_FOR_TARGET = 
+LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET)
+PICFLAG = 
+PICFLAG_FOR_TARGET = 
+
+CXX = c++
+
+# Use -O2 to stress test the compiler.
+LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates
+CXXFLAGS_FOR_TARGET = $(CXXFLAGS)
+LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates
+
+DLLTOOL = dlltool
+WINDRES = windres
+
+NM = nm
+
+LD = ld
+
+BZIPPROG = bzip2
+MD5PROG = md5sum
+
+# These values are substituted by configure.
+DEFAULT_YACC = yacc
+DEFAULT_LEX = lex
+DEFAULT_M4 = m4
+
+BISON = `if [ -f $$r/bison/bison ] ; then \
+	    echo $$r/bison/bison -L $$s/bison/ ; \
+	 else \
+	    echo bison ; \
+	 fi`
+
+YACC = `if [ -f $$r/bison/bison ] ; then \
+	    echo $$r/bison/bison -y -L $$s/bison/ ; \
+	elif [ -f $$r/byacc/byacc ] ; then \
+	    echo $$r/byacc/byacc ; \
+	else \
+	    echo ${DEFAULT_YACC} ; \
+	fi`
+
+LEX = `if [ -f $$r/flex/flex ] ; \
+	then echo $$r/flex/flex ; \
+	else echo ${DEFAULT_LEX} ; fi`
+
+M4 = `if [ -f $$r/m4/m4 ] ; \
+	then echo $$r/m4/m4 ; \
+	else echo ${DEFAULT_M4} ; fi`
+
+# For an installed makeinfo, we require it to be from texinfo 4 or
+# higher, else we use the "missing" dummy.
+MAKEINFO = `if [ -f $$r/texinfo/makeinfo/makeinfo ] ; \
+	then echo $$r/texinfo/makeinfo/makeinfo ; \
+	else if (makeinfo --version \
+	  | egrep 'texinfo[^0-9]*([1-3][0-9]|[4-9])') >/dev/null 2>&1; \
+        then echo makeinfo; else echo $$s/missing makeinfo; fi; fi`
+
+# This just becomes part of the MAKEINFO definition passed down to
+# sub-makes.  It lets flags be given on the command line while still
+# using the makeinfo from the object tree.
+MAKEINFOFLAGS =
+
+EXPECT = `if [ -f $$r/expect/expect ] ; \
+	then echo $$r/expect/expect ; \
+	else echo expect ; fi`
+
+RUNTEST = `if [ -f $$s/dejagnu/runtest ] ; \
+	then echo $$s/dejagnu/runtest ; \
+	else echo runtest ; fi`
+
+
+# compilers to use to create programs which must be run in the build
+# environment.
+CC_FOR_BUILD = $(CC)
+CXX_FOR_BUILD = $(CXX)
+
+SUBDIRS = "this is set via configure, don't edit this"
+OTHERS = 
+
+# This is set by the configure script to the list of directories which
+# should be built using the target tools.
+TARGET_CONFIGDIRS = libiberty libgloss $(SPECIAL_LIBS) newlib winsup opcodes libf2c libobjc
+
+# Target libraries are put under this directory:
+# Changed by configure to $(target_alias) if cross.
+TARGET_SUBDIR = .
+
+BUILD_CONFIGDIRS = libiberty
+BUILD_SUBDIR = .
+
+# This is set by the configure script to the arguments to use when configuring
+# directories built for the target.
+TARGET_CONFIGARGS = 
+
+# This is set by the configure script to the arguments to use when configuring
+# directories built for the build system.
+BUILD_CONFIGARGS =
+
+# This is set by configure to REALLY_SET_LIB_PATH if --enable-shared
+# was used.
+SET_LIB_PATH =
+
+# This is the name of the environment variable used for the path to
+# the libraries.  This may be changed by configure.in.
+RPATH_ENVVAR = LD_LIBRARY_PATH
+
+# This is the list of directories that may be needed in RPATH_ENVVAR
+# so that programs built for the host machine work.
+HOST_LIB_PATH = $$r/bfd:$$r/opcodes
+
+# This is the list of directories that may be needed in RPATH_ENVVAR
+# so that prorgams built for the target machine work.
+TARGET_LIB_PATH = $$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs:
+
+# configure.in sets SET_LIB_PATH to this if --enable-shared was used.
+# Some platforms don't like blank entries, so we remove duplicate,
+# leading and trailing colons.
+REALLY_SET_LIB_PATH = \
+  $(RPATH_ENVVAR)=`echo "$(HOST_LIB_PATH):$(TARGET_LIB_PATH):$$$(RPATH_ENVVAR)" | sed 's,::*,:,g;s,^:*,,;s,:*$$,,'`; export $(RPATH_ENVVAR);
+
+ALL = all.normal
+INSTALL_TARGET = installdirs \
+	install-gcc \
+	$(INSTALL_MODULES) \
+	$(INSTALL_TARGET_MODULES) \
+	$(INSTALL_X11_MODULES) \
+	$(INSTALL_DOSREL)
+
+INSTALL_TARGET_CROSS = installdirs \
+	install-gcc-cross \
+	$(INSTALL_MODULES) \
+	$(INSTALL_TARGET_MODULES) \
+	$(INSTALL_X11_MODULES) \
+	$(INSTALL_DOSREL)
+
+# Should be substed by configure.in
+FLAGS_FOR_TARGET =
+CC_FOR_TARGET =
+CXX_FOR_TARGET =
+CXX_FOR_TARGET_FOR_RECURSIVE_MAKE =
+GCJ_FOR_TARGET =
+
+# If GCC_FOR_TARGET is not overriden on the command line, then this
+# variable is passed down to the gcc Makefile, where it is used to
+# build libgcc2.a.  We define it here so that it can itself be
+# overridden on the command line.
+GCC_FOR_TARGET = $(STAGE_CC_WRAPPER) $$r/gcc/xgcc -B$$r/gcc/ $(FLAGS_FOR_TARGET)
+
+AS_FOR_TARGET = ` \
+  if [ -f $$r/gas/as-new ] ; then \
+    echo $$r/gas/as-new ; \
+  elif [ -f $$r/gcc/xgcc ]; then \
+    $(CC_FOR_TARGET) -print-prog-name=as ; \
+  else \
+    if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
+      echo $(AS); \
+    else \
+       t='$(program_transform_name)'; echo as | sed -e 's/x/x/' $$t ; \
+    fi; \
+  fi`
+
+LD_FOR_TARGET = ` \
+  if [ -f $$r/ld/ld-new ] ; then \
+    echo $$r/ld/ld-new ; \
+  elif [ -f $$r/gcc/xgcc ]; then \
+    $(CC_FOR_TARGET) -print-prog-name=ld ; \
+  else \
+    if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
+      echo $(LD); \
+    else \
+       t='$(program_transform_name)'; echo ld | sed -e 's/x/x/' $$t ; \
+    fi; \
+  fi`
+
+DLLTOOL_FOR_TARGET = ` \
+  if [ -f $$r/binutils/dlltool ] ; then \
+    echo $$r/binutils/dlltool ; \
+  else \
+    if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
+      echo $(DLLTOOL); \
+    else \
+       t='$(program_transform_name)'; echo dlltool | sed -e 's/x/x/' $$t ; \
+    fi; \
+  fi`
+
+WINDRES_FOR_TARGET = ` \
+  if [ -f $$r/binutils/windres ] ; then \
+    echo $$r/binutils/windres ; \
+  else \
+    if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
+      echo $(WINDRES); \
+    else \
+       t='$(program_transform_name)'; echo windres | sed -e 's/x/x/' $$t ; \
+    fi; \
+  fi`
+
+AR_FOR_TARGET = ` \
+  if [ -f $$r/binutils/ar ] ; then \
+    echo $$r/binutils/ar ; \
+  else \
+    if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
+      echo $(AR); \
+    else \
+       t='$(program_transform_name)'; echo ar | sed -e 's/x/x/' $$t ; \
+    fi; \
+  fi`
+
+RANLIB_FOR_TARGET = ` \
+  if [ -f $$r/binutils/ranlib ] ; then \
+    echo $$r/binutils/ranlib ; \
+  else \
+    if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
+      if [ x'$(RANLIB)' != x ]; then \
+         echo $(RANLIB); \
+      else \
+         echo ranlib; \
+      fi; \
+    else \
+       t='$(program_transform_name)'; echo ranlib | sed -e 's/x/x/' $$t ; \
+    fi; \
+  fi`
+
+NM_FOR_TARGET = ` \
+  if [ -f $$r/binutils/nm-new ] ; then \
+    echo $$r/binutils/nm-new ; \
+  elif [ -f $$r/gcc/xgcc ]; then \
+    $(CC_FOR_TARGET) -print-prog-name=nm ; \
+  else \
+    if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
+      echo $(NM); \
+    else \
+       t='$(program_transform_name)'; echo nm | sed -e 's/x/x/' $$t ; \
+    fi; \
+  fi`
+
+# The first rule in the file had better be this one.  Don't put any above it.
+# This lives here to allow makefile fragments to contain dependencies.
+all: all.normal
+.PHONY: all
+
+# These can be overridden by config/mt-*.
+# The _TARGET_ is because they're specified in mt-foo.
+# The _HOST_ is because they're programs that run on the host.
+EXTRA_TARGET_HOST_ALL_MODULES =
+EXTRA_TARGET_HOST_INSTALL_MODULES =
+EXTRA_TARGET_HOST_CHECK_MODULES =
+
+#### host and target specific makefile fragments come in here.
+###
+
+# Flags to pass down to all sub-makes.
+# Please keep these in alphabetical order.
+BASE_FLAGS_TO_PASS = \
+	"AR_FLAGS=$(AR_FLAGS)" \
+	"AR_FOR_TARGET=$(AR_FOR_TARGET)" \
+	"AS_FOR_TARGET=$(AS_FOR_TARGET)" \
+	"BISON=$(BISON)" \
+	"CC_FOR_BUILD=$(CC_FOR_BUILD)" \
+	"CC_FOR_TARGET=$(CC_FOR_TARGET)" \
+	"CFLAGS=$(CFLAGS)" \
+	"CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
+	"GCJ_FOR_TARGET=$(GCJ_FOR_TARGET)" \
+	"CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
+	"CXXFLAGS=$(CXXFLAGS)" \
+	"CXXFLAGS_FOR_TARGET=$(CXXFLAGS_FOR_TARGET)" \
+	"CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
+	"DLLTOOL_FOR_TARGET=$(DLLTOOL_FOR_TARGET)" \
+	"INSTALL=$(INSTALL)" \
+	"INSTALL_DATA=$(INSTALL_DATA)" \
+	"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
+	"INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
+	"LDFLAGS=$(LDFLAGS)" \
+	"LEX=$(LEX)" \
+	"LD_FOR_TARGET=$(LD_FOR_TARGET)" \
+	"LIBCFLAGS=$(LIBCFLAGS)" \
+	"LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
+	"LIBCXXFLAGS=$(LIBCXXFLAGS)" \
+	"LIBCXXFLAGS_FOR_TARGET=$(LIBCXXFLAGS_FOR_TARGET)" \
+	"M4=$(M4)" \
+	"MAKE=$(MAKE)" \
+	"MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
+	"NM_FOR_TARGET=$(NM_FOR_TARGET)" \
+	"RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
+	"RPATH_ENVVAR=$(RPATH_ENVVAR)" \
+	"SHELL=$(SHELL)" \
+	"EXPECT=$(EXPECT)" \
+	"RUNTEST=$(RUNTEST)" \
+	"RUNTESTFLAGS=$(RUNTESTFLAGS)" \
+	"TARGET_SUBDIR=$(TARGET_SUBDIR)" \
+	"WINDRES_FOR_TARGET=$(WINDRES_FOR_TARGET)" \
+	"YACC=$(YACC)" \
+	"bindir=$(bindir)" \
+	"datadir=$(datadir)" \
+	"exec_prefix=$(exec_prefix)" \
+	"includedir=$(includedir)" \
+	"infodir=$(infodir)" \
+	"libdir=$(libdir)" \
+	"libexecdir=$(libexecdir)" \
+	"lispdir=$(lispdir)" \
+	"libstdcxx_incdir=$(libstdcxx_incdir)" \
+	"libsubdir=$(libsubdir)" \
+	"localstatedir=$(localstatedir)" \
+	"mandir=$(mandir)" \
+	"oldincludedir=$(oldincludedir)" \
+	"prefix=$(prefix)" \
+	"sbindir=$(sbindir)" \
+	"sharedstatedir=$(sharedstatedir)" \
+	"sysconfdir=$(sysconfdir)" \
+	"tooldir=$(tooldir)" \
+	"build_tooldir=$(build_tooldir)" \
+	"gxx_include_dir=$(gxx_include_dir)" \
+	"gcc_version=$(gcc_version)" \
+	"gcc_version_trigger=$(gcc_version_trigger)" \
+	"target_alias=$(target_alias)" 
+
+# For any flags above that may contain shell code that varies from one
+# target library to another.  When doing recursive invocations of the
+# top-level Makefile, we don't want the outer make to evaluate them,
+# so we pass these variables down unchanged.  They must not contain
+# single nor double quotes.
+RECURSE_FLAGS = \
+	CXX_FOR_TARGET='$(CXX_FOR_TARGET_FOR_RECURSIVE_MAKE)'
+
+# Flags to pass down to most sub-makes, in which we're building with
+# the host environment.
+# If any variables are added here, they must be added to do-*, below.
+EXTRA_HOST_FLAGS = \
+	'AR=$(AR)' \
+	'AS=$(AS)' \
+	'CC=$(CC)' \
+	'CXX=$(CXX)' \
+	'DLLTOOL=$(DLLTOOL)' \
+	'LD=$(LD)' \
+	'NM=$(NM)' \
+	"`echo 'RANLIB=$(RANLIB)' | sed -e s/.*=$$/XFOO=/`" \
+	'WINDRES=$(WINDRES)'
+
+FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS)
+
+# Flags that are concerned with the location of the X11 include files
+# and library files
+#
+# NOTE: until the top-level is getting the values via autoconf, it only
+# causes problems to have this top-level Makefile overriding the autoconf-set
+# values in child directories.  Only variables that don't conflict with
+# autoconf'ed ones should be passed by X11_FLAGS_TO_PASS for now.
+#
+X11_FLAGS_TO_PASS = \
+	'X11_EXTRA_CFLAGS=$(X11_EXTRA_CFLAGS)' \
+	'X11_EXTRA_LIBS=$(X11_EXTRA_LIBS)'
+
+# Flags to pass down to makes which are built with the target environment.
+# The double $ decreases the length of the command line; the variables
+# are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them.
+# If any variables are added here, they must be added to do-*, below.
+EXTRA_TARGET_FLAGS = \
+	'AR=$$(AR_FOR_TARGET)' \
+	'AS=$$(AS_FOR_TARGET)' \
+	'CC=$$(CC_FOR_TARGET)' \
+	'CFLAGS=$$(CFLAGS_FOR_TARGET)' \
+	'CXX=$$(CXX_FOR_TARGET)' \
+	'CXXFLAGS=$$(CXXFLAGS_FOR_TARGET)' \
+	'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \
+	'LD=$$(LD_FOR_TARGET)' \
+	'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \
+	'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \
+	'NM=$$(NM_FOR_TARGET)' \
+	'RANLIB=$$(RANLIB_FOR_TARGET)' \
+	'WINDRES=$$(WINDRES_FOR_TARGET)'
+
+TARGET_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_TARGET_FLAGS)
+
+# Flags to pass down to gcc.  gcc builds a library, libgcc.a, so it
+# unfortunately needs the native compiler and the target ar and
+# ranlib.
+# If any variables are added here, they must be added to do-*, below.
+# The HOST_* variables are a special case, which are used for the gcc
+# cross-building scheme.
+EXTRA_GCC_FLAGS = \
+	'AR=$(AR)' \
+	'AS=$(AS)' \
+	'CC=$(CC)' \
+	'CXX=$(CXX)' \
+	'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \
+	'HOST_CC=$(CC_FOR_BUILD)' \
+	'BUILD_PREFIX=$(BUILD_PREFIX)' \
+	'BUILD_PREFIX_1=$(BUILD_PREFIX_1)' \
+	'NM=$(NM)' \
+	"`echo 'RANLIB=$(RANLIB)' | sed -e s/.*=$$/XFOO=/`" \
+	'WINDRES=$$(WINDRES_FOR_TARGET)' \
+	"GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \
+	"CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \
+	"`echo 'LANGUAGES=$(LANGUAGES)' | sed -e s/.*=$$/XFOO=/`" \
+	"`echo 'STMP_FIXPROTO=$(STMP_FIXPROTO)' | sed -e s/.*=$$/XFOO=/`" \
+	"`echo 'LIMITS_H_TEST=$(LIMITS_H_TEST)' | sed -e s/.*=$$/XFOO=/`" \
+	"`echo 'LIBGCC2_CFLAGS=$(LIBGCC2_CFLAGS)' | sed -e s/.*=$$/XFOO=/`" \
+	"`echo 'LIBGCC2_DEBUG_CFLAGS=$(LIBGCC2_DEBUG_CFLAGS)' | sed -e s/.*=$$/XFOO=/`" \
+	"`echo 'LIBGCC2_INCLUDES=$(LIBGCC2_INCLUDES)' | sed -e s/.*=$$/XFOO=/`" \
+	"`echo 'ENQUIRE=$(ENQUIRE)' | sed -e s/.*=$$/XFOO=/`" \
+	"`echo 'STAGE1_CFLAGS=$(STAGE1_CFLAGS)' | sed -e s/.*=$$/XFOO=/`" \
+	"`echo 'BOOT_CFLAGS=$(BOOT_CFLAGS)' | sed -e s/.*=$$/XFOO=/`"
+
+GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_GCC_FLAGS)
+
+# This is a list of the targets for all of the modules which are compiled
+# using the build machine's native compiler.  Configure edits the second
+# macro for build!=host builds.
+ALL_BUILD_MODULES_LIST = \
+	all-build-libiberty
+ALL_BUILD_MODULES = 
+
+# This is a list of the configure targets for all of the modules which
+# are compiled using the native tools.
+CONFIGURE_BUILD_MODULES = \
+	configure-build-libiberty
+
+# This is a list of the targets for all of the modules which are compiled
+# using $(FLAGS_TO_PASS).
+ALL_MODULES = [+ FOR host_modules +]\
+	all-[+module+] [+ ENDFOR host_modules +]\
+	$(EXTRA_TARGET_HOST_ALL_MODULES)
+
+# This is a list of the check targets for all of the modules which are
+# compiled using $(FLAGS_TO_PASS).
+#
+# The list is in two parts.  The first lists those tools which
+# are tested as part of the host's native tool-chain, and not
+# tested in a cross configuration.
+NATIVE_CHECK_MODULES = \
+	check-bison \
+	check-byacc \
+	check-fastjar \
+	check-flex \
+	check-zip
+
+CROSS_CHECK_MODULES = [+ FOR host_modules +][+ IF no_check  +][+ ELIF no_check_cross +][+ ELSE x +]\
+	check-[+module+] [+ ENDIF no_check +][+ ENDFOR host_modules +]\
+	$(EXTRA_TARGET_HOST_CHECK_MODULES)
+
+CHECK_MODULES=$(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
+
+# This is a list of the install targets for all of the modules which are
+# compiled using $(FLAGS_TO_PASS).
+# We put install-opcodes before install-binutils because the installed
+# binutils might be on PATH, and they might need the shared opcodes
+# library.
+# We put install-tcl before install-itcl because itcl wants to run a
+# program on installation which uses the Tcl libraries.
+INSTALL_MODULES = [+ FOR host_modules+][+ IF no_install +][+ ELSE no_install +]\
+	install-[+module+] [+ ENDIF no_install +][+ ENDFOR host_modules +]\
+	$(EXTRA_TARGET_HOST_INSTALL_MODULES)
+
+# This is a list of the targets for all of the modules which are compiled
+# using $(X11_FLAGS_TO_PASS).
+ALL_X11_MODULES = \
+	all-gdb \
+	all-expect \
+	all-guile \
+	all-tclX \
+	all-tk \
+	all-tix
+
+# This is a list of the check targets for all of the modules which are
+# compiled using $(X11_FLAGS_TO_PASS).
+CHECK_X11_MODULES = \
+	check-gdb \
+	check-guile \
+	check-expect \
+	check-tclX \
+	check-tk \
+	check-tix
+
+# This is a list of the install targets for all the modules which are
+# compiled using $(X11_FLAGS_TO_PASS).
+INSTALL_X11_MODULES = \
+	install-gdb \
+	install-guile \
+	install-expect \
+	install-tclX \
+	install-tk \
+	install-tix
+
+# This is a list of the targets for all of the modules which are compiled
+# using $(TARGET_FLAGS_TO_PASS).
+ALL_TARGET_MODULES = \
+	all-target-libstdc++-v3 \
+	all-target-newlib \
+	all-target-libf2c \
+	all-target-libobjc \
+	all-target-libtermcap \
+	all-target-winsup \
+	all-target-libgloss \
+	all-target-libiberty \
+	all-target-gperf \
+	all-target-examples \
+	all-target-libffi \
+	all-target-libjava \
+	all-target-zlib \
+	all-target-boehm-gc \
+	all-target-qthreads
+
+# This is a list of the configure targets for all of the modules which
+# are compiled using the target tools.
+CONFIGURE_TARGET_MODULES = \
+	configure-target-libstdc++-v3 \
+	configure-target-newlib \
+	configure-target-libf2c \
+	configure-target-libobjc \
+	configure-target-libtermcap \
+	configure-target-winsup \
+	configure-target-libgloss \
+	configure-target-libiberty \
+	configure-target-gperf \
+	configure-target-examples \
+	configure-target-libffi \
+	configure-target-libjava \
+	configure-target-zlib \
+	configure-target-boehm-gc \
+	configure-target-qthreads
+
+# This is a list of the check targets for all of the modules which are
+# compiled using $(TARGET_FLAGS_TO_PASS).
+CHECK_TARGET_MODULES = \
+	check-target-libstdc++-v3 \
+	check-target-newlib \
+	check-target-libf2c \
+	check-target-libobjc \
+	check-target-winsup \
+	check-target-libiberty \
+	check-target-libffi \
+	check-target-libjava \
+	check-target-zlib \
+	check-target-boehm-gc \
+	check-target-qthreads \
+	check-target-gperf
+
+# This is a list of the install targets for all of the modules which are
+# compiled using $(TARGET_FLAGS_TO_PASS).
+INSTALL_TARGET_MODULES = \
+	install-target-libstdc++-v3 \
+	install-target-newlib \
+	install-target-libf2c \
+	install-target-libobjc \
+	install-target-libtermcap \
+	install-target-winsup \
+	install-target-libgloss \
+	install-target-libiberty \
+	install-target-libjava \
+	install-target-zlib \
+	install-target-boehm-gc \
+	install-target-qthreads \
+	install-target-gperf
+
+# This is a list of the targets for which we can do a clean-{target}.
+CLEAN_MODULES = [+ FOR host_modules +][+ IF no_clean +][+ ELSE no_clean +]\
+	clean-[+module+] [+ ENDIF no_clean +][+ ENDFOR host_modules +]
+
+# All of the target modules that can be cleaned
+CLEAN_TARGET_MODULES = \
+	clean-target-libstdc++-v3 \
+	clean-target-newlib \
+	clean-target-libf2c \
+	clean-target-libobjc \
+	clean-target-winsup \
+	clean-target-libgloss \
+	clean-target-libiberty \
+	clean-target-gperf \
+	clean-target-examples \
+	clean-target-libffi \
+	clean-target-libjava \
+	clean-target-zlib \
+	clean-target-boehm-gc \
+	clean-target-qthreads
+
+# All of the x11 modules that can be cleaned
+CLEAN_X11_MODULES = \
+	clean-gdb \
+	clean-expect \
+	clean-guile \
+	clean-tclX \
+	clean-tk \
+	clean-tix
+
+# The target built for a native build.
+.PHONY: all.normal
+all.normal: \
+	$(ALL_BUILD_MODULES) \
+	$(ALL_MODULES) \
+	$(ALL_X11_MODULES) \
+	$(ALL_TARGET_MODULES) \
+	all-gcc
+
+# Do a target for all the subdirectories.  A ``make do-X'' will do a
+# ``make X'' in all subdirectories (because, in general, there is a
+# dependency (below) of X upon do-X, a ``make X'' will also do this,
+# but it may do additional work as well).
+# This target ensures that $(BASE_FLAGS_TO_PASS) appears only once,
+# because it is so large that it can easily overflow the command line
+# length limit on some systems.
+DO_X = \
+	do-clean \
+	do-distclean \
+	do-dvi \
+	do-info \
+	do-install-info \
+	do-installcheck \
+	do-mostlyclean \
+	do-maintainer-clean \
+	do-TAGS
+.PHONY: $(DO_X)
+$(DO_X):
+	@target=`echo $@ | sed -e 's/^do-//'`; \
+	r=`${PWD}`; export r; \
+	s=`cd $(srcdir); ${PWD}`; export s; \
+	$(SET_LIB_PATH) \
+	for i in $(SUBDIRS) -dummy-; do \
+	  if [ -f ./$$i/Makefile ]; then \
+	    case $$i in \
+	    gcc) \
+	      for flag in $(EXTRA_GCC_FLAGS); do \
+		eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+	      done; \
+	      ;; \
+	    *) \
+	      for flag in $(EXTRA_HOST_FLAGS); do \
+		eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+	      done; \
+	      ;; \
+	    esac ; \
+	    if (cd ./$$i; \
+	        $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+			"CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+	                "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \
+			"DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+			$${target}); \
+	    then true; else exit 1; fi; \
+	  else true; fi; \
+	done
+	@target=`echo $@ | sed -e 's/^do-//'`; \
+	r=`${PWD}`; export r; \
+	s=`cd $(srcdir); ${PWD}`; export s; \
+	$(SET_LIB_PATH) \
+	for i in $(TARGET_CONFIGDIRS) -dummy-; do \
+	  if [ -f $(TARGET_SUBDIR)/$$i/Makefile ]; then \
+	    for flag in $(EXTRA_TARGET_FLAGS); do \
+		eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+	    done; \
+	    if (cd $(TARGET_SUBDIR)/$$i; \
+	        $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+			"CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+	                "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \
+			"DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+			$${target}); \
+	    then true; else exit 1; fi; \
+	  else true; fi; \
+	done
+
+# Here are the targets which correspond to the do-X targets.
+
+.PHONY: info installcheck dvi install-info
+.PHONY: clean distclean mostlyclean maintainer-clean realclean
+.PHONY: local-clean local-distclean local-maintainer-clean
+info: do-info
+installcheck: do-installcheck
+dvi: do-dvi
+
+# Make sure makeinfo is built before we do a `make info'.
+do-info: all-texinfo
+
+install-info: do-install-info dir.info
+	s=`cd $(srcdir); ${PWD}`; export s; \
+	if [ -f dir.info ] ; then \
+	  $(INSTALL_DATA) dir.info $(infodir)/dir.info ; \
+	else true ; fi
+
+local-clean:
+	-rm -f *.a TEMP errs core *.o *~ \#* TAGS *.E *.log
+
+local-distclean:
+	-rm -f Makefile config.status config.cache mh-frag mt-frag
+	-if [ "$(TARGET_SUBDIR)" != "." ]; then \
+	  rm -rf $(TARGET_SUBDIR); \
+	else true; fi
+	-rm -f texinfo/po/Makefile texinfo/po/Makefile.in texinfo/info/Makefile
+	-rm -f texinfo/doc/Makefile texinfo/po/POTFILES
+	-rmdir texinfo/doc texinfo/info texinfo/intl texinfo/lib 2>/dev/null
+	-rmdir texinfo/makeinfo texinfo/po texinfo/util 2>/dev/null
+	-rmdir fastjar gcc libiberty texinfo zlib 2>/dev/null
+
+local-maintainer-clean:
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+clean: do-clean local-clean
+mostlyclean: do-mostlyclean local-clean
+distclean: do-distclean local-clean local-distclean
+maintainer-clean: local-maintainer-clean do-maintainer-clean local-clean 
+maintainer-clean: local-distclean
+realclean: maintainer-clean
+
+# This rule is used to clean specific modules.
+.PHONY: $(CLEAN_MODULES) $(CLEAN_X11_MODULES) clean-gcc
+$(CLEAN_MODULES) $(CLEAN_X11_MODULES) clean-gcc:
+	@dir=`echo $@ | sed -e 's/clean-//'`; \
+	if [ -f ./$${dir}/Makefile ] ; then \
+	  r=`${PWD}`; export r; \
+	  s=`cd $(srcdir); ${PWD}`; export s; \
+	  $(SET_LIB_PATH) \
+	  (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) clean); \
+	else \
+	  true; \
+	fi
+
+.PHONY: $(CLEAN_TARGET_MODULES)
+$(CLEAN_TARGET_MODULES):
+	@dir=`echo $@ | sed -e 's/clean-target-//'`; \
+	rm -f $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/tmpmulti.out; \
+	if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
+	  r=`${PWD}`; export r; \
+	  s=`cd $(srcdir); ${PWD}`; export s; \
+	  $(SET_LIB_PATH) \
+	  (cd $(TARGET_SUBDIR)/$${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) clean); \
+	else \
+	  true; \
+	fi
+
+clean-target: $(CLEAN_TARGET_MODULES) clean-target-libgcc
+clean-target-libgcc:
+	test ! -d gcc/libgcc || \
+	(cd gcc/libgcc && find . -type d -print) | \
+	while read d; do rm -f gcc/$$d/libgcc.a || : ; done
+	-rm -rf gcc/libgcc
+
+# Check target.
+
+.PHONY: check do-check
+check:
+	$(MAKE) do-check NOTPARALLEL=parallel-ok
+
+do-check: $(CHECK_MODULES) \
+	$(CHECK_TARGET_MODULES) \
+	$(CHECK_X11_MODULES) \
+	check-gcc
+
+# Automated reporting of test results.
+
+warning.log: build.log
+	$(srcdir)/contrib/warn_summary build.log > $@
+
+mail-report.log:
+	if test x'$(BOOT_CFLAGS)' != x''; then \
+	    BOOT_CFLAGS='$(BOOT_CFLAGS)'; export BOOT_CFLAGS; \
+	fi; \
+	$(srcdir)/contrib/test_summary -t >$@
+	chmod +x $@
+	echo If you really want to send e-mail, run ./$@ now
+
+mail-report-with-warnings.log: warning.log
+	if test x'$(BOOT_CFLAGS)' != x''; then \
+	    BOOT_CFLAGS='$(BOOT_CFLAGS)'; export BOOT_CFLAGS; \
+	fi; \
+	$(srcdir)/contrib/test_summary -t -i warning.log >$@
+	chmod +x $@
+	echo If you really want to send e-mail, run ./$@ now
+
+# Installation targets.
+
+.PHONY: install install-cross uninstall source-vault binary-vault vault-install
+install: $(INSTALL_TARGET) 
+install-cross: $(INSTALL_TARGET_CROSS) 
+
+uninstall:
+	@echo "the uninstall target is not supported in this tree"
+
+source-vault:
+	$(MAKE) -f ./release/Build-A-Release \
+		host=$(host_alias) source-vault
+
+binary-vault:
+	$(MAKE) -f ./release/Build-A-Release \
+		host=$(host_alias) target=$(target_alias)
+
+vault-install:
+	@if [ -f ./release/vault-install ] ; then \
+	  ./release/vault-install $(host_alias) $(target_alias) ; \
+	else \
+	  true ; \
+	fi
+
+.PHONY: install.all
+install.all: install-no-fixedincludes
+	@if [ -f ./gcc/Makefile ] ; then \
+		r=`${PWD}` ; export r ; \
+		$(SET_LIB_PATH) \
+		(cd ./gcc; \
+		$(MAKE) $(FLAGS_TO_PASS) install-headers) ; \
+	else \
+		true ; \
+	fi
+
+# install-no-fixedincludes is used because Cygnus can not distribute
+# the fixed header files.
+.PHONY: install-no-fixedincludes
+install-no-fixedincludes: \
+	installdirs \
+	$(INSTALL_MODULES) \
+	$(INSTALL_TARGET_MODULES) \
+	$(INSTALL_X11_MODULES) \
+	gcc-no-fixedincludes 
+
+# Install the gcc headers files, but not the fixed include files,
+# which Cygnus is not allowed to distribute.  This rule is very
+# dependent on the workings of the gcc Makefile.in.
+.PHONY: gcc-no-fixedincludes
+gcc-no-fixedincludes:
+	@if [ -f ./gcc/Makefile ]; then \
+	  rm -rf gcc/tmp-include; \
+	  mv gcc/include gcc/tmp-include 2>/dev/null; \
+	  mkdir gcc/include; \
+	  cp $(srcdir)/gcc/gsyslimits.h gcc/include/syslimits.h; \
+	  touch gcc/stmp-fixinc gcc/include/fixed; \
+	  rm -f gcc/stmp-headers gcc/stmp-int-hdrs; \
+	  r=`${PWD}`; export r; \
+	  s=`cd $(srcdir); ${PWD}` ; export s; \
+	  $(SET_LIB_PATH) \
+	  (cd ./gcc; \
+	   $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
+	  rm -rf gcc/include; \
+	  mv gcc/tmp-include gcc/include 2>/dev/null; \
+	else true; fi
+
+# This rule is used to build the modules which are built with the
+# build machine's native compiler.
+.PHONY: $(ALL_BUILD_MODULES)
+$(ALL_BUILD_MODULES):
+	dir=`echo $@ | sed -e 's/all-build-//'`; \
+	if [ -f ./$${dir}/Makefile ] ; then \
+	  r=`${PWD}`; export r; \
+	  s=`cd $(srcdir); ${PWD}`; export s; \
+	  (cd $(BUILD_SUBDIR)/$${dir} && $(MAKE) all); \
+	else \
+	  true; \
+	fi
+
+# This rule is used to configure the modules which are built with the
+# native tools.
+.PHONY: $(CONFIGURE_BUILD_MODULES)
+$(CONFIGURE_BUILD_MODULES):
+	@dir=`echo $@ | sed -e 's/configure-build-//'`; \
+	if [ ! -d $(BUILD_SUBDIR) ]; then \
+	  true; \
+	elif [ -f $(BUILD_SUBDIR)/$${dir}/Makefile ] ; then \
+	  true; \
+	elif echo " $(BUILD_CONFIGDIRS) " | grep " $${dir} " >/dev/null 2>&1; then \
+	  if [ -d $(srcdir)/$${dir} ]; then \
+	    [ -d $(BUILD_SUBDIR)/$${dir} ] || mkdir $(BUILD_SUBDIR)/$${dir};\
+	    r=`${PWD}`; export r; \
+	    s=`cd $(srcdir); ${PWD}`; export s; \
+	    AR="$(AR_FOR_BUILD)"; export AR; \
+	    AS="$(AS_FOR_BUILD)"; export AS; \
+	    CC="$(CC_FOR_BUILD)"; export CC; \
+	    CFLAGS="$(CFLAGS_FOR_BUILD)"; export CFLAGS; \
+	    CXX="$(CXX_FOR_BUILD)"; export CXX; \
+	    CXXFLAGS="$(CXXFLAGS_FOR_BUILD)"; export CXXFLAGS; \
+	    GCJ="$(GCJ_FOR_BUILD)"; export GCJ; \
+	    DLLTOOL="$(DLLTOOL_FOR_BUILD)"; export DLLTOOL; \
+	    LD="$(LD_FOR_BUILD)"; export LD; \
+            LDFLAGS="$(LDFLAGS_FOR_BUILD)"; export LDFLAGS; \
+	    NM="$(NM_FOR_BUILD)"; export NM; \
+	    RANLIB="$(RANLIB_FOR_BUILD)"; export RANLIB; \
+	    WINDRES="$(WINDRES_FOR_BUILD)"; export WINDRES; \
+	    echo Configuring in $(BUILD_SUBDIR)/$${dir}; \
+	    cd "$(BUILD_SUBDIR)/$${dir}" || exit 1; \
+	    case $(srcdir) in \
+	    /* | [A-Za-z]:[\\/]*) \
+	      topdir=$(srcdir) ;; \
+	    *) \
+	      case "$(BUILD_SUBDIR)" in \
+	      .) topdir="../$(srcdir)" ;; \
+	      *) topdir="../../$(srcdir)" ;; \
+	      esac ;; \
+	    esac; \
+	    if [ "$(srcdir)" = "." ] ; then \
+	      if [ "$(BUILD_SUBDIR)" != "." ] ; then \
+		if $(SHELL) $$s/symlink-tree $${topdir}/$${dir} "no-such-file" ; then \
+		  if [ -f Makefile ]; then \
+		    if $(MAKE) distclean; then \
+		      true; \
+		    else \
+		      exit 1; \
+		    fi; \
+		  else \
+		    true; \
+		  fi; \
+		else \
+		  exit 1; \
+		fi; \
+	      else \
+		true; \
+	      fi; \
+	      srcdiroption="--srcdir=."; \
+	      libsrcdir="."; \
+	    else \
+	      srcdiroption="--srcdir=$${topdir}/$${dir}"; \
+	      libsrcdir="$$s/$${dir}"; \
+	    fi; \
+	    if [ -f $${libsrcdir}/configure ] ; then \
+	      rm -f no-such-file skip-this-dir; \
+	      CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+		$(BUILD_CONFIGARGS) $${srcdiroption} \
+		--with-build-subdir="$(BUILD_SUBDIR)"; \
+	    else \
+	      rm -f no-such-file skip-this-dir; \
+	      CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+		$(BUILD_CONFIGARGS) $${srcdiroption} \
+		--with-build-subdir="$(BUILD_SUBDIR)"; \
+	    fi || exit 1; \
+	    if [ -f skip-this-dir ] ; then \
+	      sh skip-this-dir; \
+	      rm -f skip-this-dir; \
+	      cd ..; rmdir $${dir} || true; \
+	    else \
+	      true; \
+	    fi; \
+	  else \
+	    true; \
+	  fi; \
+	else \
+	  true; \
+	fi
+
+# This rule is used to build the modules which use FLAGS_TO_PASS.  To
+# build a target all-X means to cd to X and make all.
+#
+# all-gui, and all-libproc are handled specially because
+# they are still experimental, and if they fail to build, that
+# shouldn't stop "make all".
+.PHONY: $(ALL_MODULES) all-gui all-libproc
+$(ALL_MODULES) all-gui all-libproc:
+	@dir=`echo $@ | sed -e 's/all-//'`; \
+	if [ -f ./$${dir}/Makefile ] ; then \
+	  r=`${PWD}`; export r; \
+	  s=`cd $(srcdir); ${PWD}`; export s; \
+	  $(SET_LIB_PATH) \
+	  (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) all); \
+	else \
+	  true; \
+	fi
+
+# These rules are used to check the modules which use FLAGS_TO_PASS.
+# To build a target check-X means to cd to X and make check.  Some
+# modules are only tested in a native toolchain.
+
+.PHONY: $(CHECK_MODULES) $(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
+$(NATIVE_CHECK_MODULES):
+	@if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
+	  dir=`echo $@ | sed -e 's/check-//'`; \
+	  if [ -f ./$${dir}/Makefile ] ; then \
+	    r=`${PWD}`; export r; \
+	    s=`cd $(srcdir); ${PWD}`; export s; \
+	    $(SET_LIB_PATH) \
+	    (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
+	  else \
+	    true; \
+	  fi; \
+	fi
+
+$(CROSS_CHECK_MODULES):
+	@dir=`echo $@ | sed -e 's/check-//'`; \
+	if [ -f ./$${dir}/Makefile ] ; then \
+	  r=`${PWD}`; export r; \
+	  s=`cd $(srcdir); ${PWD}`; export s; \
+	  $(SET_LIB_PATH) \
+	  (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
+	else \
+	  true; \
+	fi
+
+# This rule is used to install the modules which use FLAGS_TO_PASS.
+# To build a target install-X means to cd to X and make install.
+.PHONY: $(INSTALL_MODULES)
+$(INSTALL_MODULES): installdirs
+	@dir=`echo $@ | sed -e 's/install-//'`; \
+	if [ -f ./$${dir}/Makefile ] ; then \
+	  r=`${PWD}`; export r; \
+	  s=`cd $(srcdir); ${PWD}`; export s; \
+	  $(SET_LIB_PATH) \
+	  (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
+	else \
+	  true; \
+	fi
+
+# This rule is used to configure the modules which are built with the
+# target tools.
+.PHONY: $(CONFIGURE_TARGET_MODULES)
+$(CONFIGURE_TARGET_MODULES):
+	@dir=`echo $@ | sed -e 's/configure-target-//'`; \
+	if [ -d $(TARGET_SUBDIR)/$${dir} ]; then \
+	  r=`${PWD}`; export r; \
+	  $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/$${dir}/tmpmulti.out 2> /dev/null; \
+	  if [ -s $(TARGET_SUBDIR)/$${dir}/tmpmulti.out ]; then \
+	    if [ -f $(TARGET_SUBDIR)/$${dir}/multilib.out ]; then \
+	      if cmp $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/tmpmulti.out > /dev/null; then \
+		rm -f $(TARGET_SUBDIR)/$${dir}/tmpmulti.out; \
+	      else \
+		echo "Multilibs changed for $${dir}, reconfiguring"; \
+		rm -f $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/Makefile; \
+		mv $(TARGET_SUBDIR)/$${dir}/tmpmulti.out $(TARGET_SUBDIR)/$${dir}/multilib.out; \
+	      fi; \
+	    else \
+	      mv $(TARGET_SUBDIR)/$${dir}/tmpmulti.out $(TARGET_SUBDIR)/$${dir}/multilib.out; \
+	    fi; \
+	  fi; \
+	fi; exit 0	# break command into two pieces
+	@dir=`echo $@ | sed -e 's/configure-target-//'`; \
+	if [ ! -d $(TARGET_SUBDIR) ]; then \
+	  true; \
+	elif [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
+	  true; \
+	elif echo " $(TARGET_CONFIGDIRS) " | grep " $${dir} " >/dev/null 2>&1; then \
+	  if [ -d $(srcdir)/$${dir} ]; then \
+	    [ -d $(TARGET_SUBDIR)/$${dir} ] || mkdir $(TARGET_SUBDIR)/$${dir};\
+	    r=`${PWD}`; export r; \
+	    s=`cd $(srcdir); ${PWD}`; export s; \
+	    $(SET_LIB_PATH) \
+	    AR="$(AR_FOR_TARGET)"; export AR; \
+	    AS="$(AS_FOR_TARGET)"; export AS; \
+	    CC="$(CC_FOR_TARGET)"; export CC; \
+	    CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+	    CXX="$(CXX_FOR_TARGET)"; export CXX; \
+	    CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+	    GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+	    DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+	    LD="$(LD_FOR_TARGET)"; export LD; \
+            LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+	    NM="$(NM_FOR_TARGET)"; export NM; \
+	    RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+	    WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
+	    echo Configuring in $(TARGET_SUBDIR)/$${dir}; \
+	    cd "$(TARGET_SUBDIR)/$${dir}" || exit 1; \
+	    case $(srcdir) in \
+	    /* | [A-Za-z]:[\\/]*) \
+	      topdir=$(srcdir) ;; \
+	    *) \
+	      case "$(TARGET_SUBDIR)" in \
+	      .) topdir="../$(srcdir)" ;; \
+	      *) topdir="../../$(srcdir)" ;; \
+	      esac ;; \
+	    esac; \
+	    if [ "$(srcdir)" = "." ] ; then \
+	      if [ "$(TARGET_SUBDIR)" != "." ] ; then \
+		if $(SHELL) $$s/symlink-tree $${topdir}/$${dir} "no-such-file" ; then \
+		  if [ -f Makefile ]; then \
+		    if $(MAKE) distclean; then \
+		      true; \
+		    else \
+		      exit 1; \
+		    fi; \
+		  else \
+		    true; \
+		  fi; \
+		else \
+		  exit 1; \
+		fi; \
+	      else \
+		true; \
+	      fi; \
+	      srcdiroption="--srcdir=."; \
+	      libsrcdir="."; \
+	    else \
+	      srcdiroption="--srcdir=$${topdir}/$${dir}"; \
+	      libsrcdir="$$s/$${dir}"; \
+	    fi; \
+	    if [ -f $${libsrcdir}/configure ] ; then \
+	      rm -f no-such-file skip-this-dir; \
+	      CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+		$(TARGET_CONFIGARGS) $${srcdiroption} \
+		--with-target-subdir="$(TARGET_SUBDIR)"; \
+	    else \
+	      rm -f no-such-file skip-this-dir; \
+	      CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+		$(TARGET_CONFIGARGS) $${srcdiroption} \
+		--with-target-subdir="$(TARGET_SUBDIR)"; \
+	    fi || exit 1; \
+	    if [ -f skip-this-dir ] ; then \
+	      sh skip-this-dir; \
+	      rm -f skip-this-dir; \
+	      cd ..; rmdir $${dir} || true; \
+	    else \
+	      true; \
+	    fi; \
+	  else \
+	    true; \
+	  fi; \
+	else \
+	  true; \
+	fi
+
+# This rule is used to build the modules which use TARGET_FLAGS_TO_PASS.
+# To build a target all-X means to cd to X and make all.
+.PHONY: $(ALL_TARGET_MODULES)
+$(ALL_TARGET_MODULES):
+	@dir=`echo $@ | sed -e 's/all-target-//'`; \
+	if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
+	  r=`${PWD}`; export r; \
+	  s=`cd $(srcdir); ${PWD}`; export s; \
+	  $(SET_LIB_PATH) \
+	  (cd $(TARGET_SUBDIR)/$${dir}; \
+	    $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+	else \
+	  true; \
+	fi
+
+# This rule is used to check the modules which use TARGET_FLAGS_TO_PASS.
+# To build a target install-X means to cd to X and make install.
+.PHONY: $(CHECK_TARGET_MODULES)
+$(CHECK_TARGET_MODULES):
+	@dir=`echo $@ | sed -e 's/check-target-//'`; \
+	if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
+	  r=`${PWD}`; export r; \
+	  s=`cd $(srcdir); ${PWD}`; export s; \
+	  $(SET_LIB_PATH) \
+	  (cd $(TARGET_SUBDIR)/$${dir}; \
+	    $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
+	else \
+	  true; \
+	fi
+
+# This rule is used to install the modules which use
+# TARGET_FLAGS_TO_PASS.  To build a target install-X means to cd to X
+# and make install.
+.PHONY: $(INSTALL_TARGET_MODULES)
+$(INSTALL_TARGET_MODULES): installdirs
+	@dir=`echo $@ | sed -e 's/install-target-//'`; \
+	if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
+	  r=`${PWD}`; export r; \
+	  s=`cd $(srcdir); ${PWD}`; export s; \
+	  $(SET_LIB_PATH) \
+	  (cd $(TARGET_SUBDIR)/$${dir}; \
+	    $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
+	else \
+	  true; \
+	fi
+
+# This rule is used to build the modules which use X11_FLAGS_TO_PASS.
+# To build a target all-X means to cd to X and make all.
+.PHONY: $(ALL_X11_MODULES)
+$(ALL_X11_MODULES):
+	@dir=`echo $@ | sed -e 's/all-//'`; \
+	if [ -f ./$${dir}/Makefile ] ; then \
+	  r=`${PWD}`; export r; \
+	  s=`cd $(srcdir); ${PWD}`; export s; \
+	  $(SET_LIB_PATH) \
+	  (cd $${dir}; \
+	   $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) all); \
+	else \
+	  true; \
+	fi
+
+# This rule is used to check the modules which use X11_FLAGS_TO_PASS.
+# To build a target check-X means to cd to X and make all.
+.PHONY: $(CHECK_X11_MODULES)
+$(CHECK_X11_MODULES):
+	@dir=`echo $@ | sed -e 's/check-//'`; \
+	if [ -f ./$${dir}/Makefile ] ; then \
+	  r=`${PWD}`; export r; \
+	  s=`cd $(srcdir); ${PWD}`; export s; \
+	  $(SET_LIB_PATH) \
+	  (cd $${dir}; \
+	   $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) check); \
+	else \
+	  true; \
+	fi
+
+# This rule is used to install the modules which use X11_FLAGS_TO_PASS.
+# To build a target install-X means to cd to X and make install.
+.PHONY: $(INSTALL_X11_MODULES)
+$(INSTALL_X11_MODULES): installdirs
+	@dir=`echo $@ | sed -e 's/install-//'`; \
+	if [ -f ./$${dir}/Makefile ] ; then \
+	  r=`${PWD}`; export r; \
+	  s=`cd $(srcdir); ${PWD}`; export s; \
+	  $(SET_LIB_PATH) \
+	  (cd $${dir}; \
+	   $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) install); \
+	else \
+	  true; \
+	fi
+
+# gcc is the only module which uses GCC_FLAGS_TO_PASS.
+.PHONY: all-gcc
+all-gcc:
+	@if [ -f ./gcc/Makefile ] ; then \
+	  r=`${PWD}`; export r; \
+	  s=`cd $(srcdir); ${PWD}`; export s; \
+	  $(SET_LIB_PATH) \
+	  (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) all); \
+	else \
+	  true; \
+	fi
+
+# Building GCC uses some tools for rebuilding "source" files
+# like texinfo, bison/byacc, etc.  So we must depend on those.
+#
+# While building GCC, it may be necessary to run various target
+# programs like the assembler, linker, etc.  So we depend on
+# those too.
+#
+# In theory, on an SMP all those dependencies can be resolved
+# in parallel.
+#
+.PHONY: bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean
+bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean: all-bootstrap
+	@r=`${PWD}`; export r; \
+	s=`cd $(srcdir); ${PWD}`; export s; \
+	$(SET_LIB_PATH) \
+	echo "Bootstrapping the compiler"; \
+	cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) $@
+	@r=`${PWD}`; export r; \
+	s=`cd $(srcdir); ${PWD}`; export s; \
+	case "$@" in \
+	  *bootstrap4-lean ) \
+			msg="Comparing stage3 and stage4 of the compiler"; \
+	  		compare=compare3-lean ;; \
+	  *bootstrap4 ) msg="Comparing stage3 and stage4 of the compiler"; \
+	  		compare=compare3 ;; \
+	  *-lean )	msg="Comparing stage2 and stage3 of the compiler"; \
+	  		compare=compare-lean ;; \
+	  * )		msg="Comparing stage2 and stage3 of the compiler"; \
+	  		compare=compare ;; \
+	esac; \
+	$(SET_LIB_PATH) \
+	echo "$$msg"; \
+	cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) $$compare
+	@r=`${PWD}`; export r; \
+	s=`cd $(srcdir); ${PWD}` ; export s; \
+	$(SET_LIB_PATH) \
+	echo "Building runtime libraries"; \
+	$(MAKE) $(BASE_FLAGS_TO_PASS) $(RECURSE_FLAGS) all
+
+.PHONY: cross
+cross: all-texinfo all-bison all-byacc all-binutils all-gas all-ld
+	@r=`${PWD}`; export r; \
+	s=`cd $(srcdir); ${PWD}`; export s; \
+	$(SET_LIB_PATH) \
+	echo "Building the C and C++ compiler"; \
+	cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) LANGUAGES="c c++"
+	@r=`${PWD}`; export r; \
+	s=`cd $(srcdir); ${PWD}` ; export s; \
+	$(SET_LIB_PATH) \
+	echo "Building runtime libraries"; \
+	$(MAKE) $(BASE_FLAGS_TO_PASS) $(RECURSE_FLAGS) \
+	  LANGUAGES="c c++" all
+
+.PHONY: check-gcc
+check-gcc:
+	@if [ -f ./gcc/Makefile ] ; then \
+	  r=`${PWD}`; export r; \
+	  s=`cd $(srcdir); ${PWD}`; export s; \
+	  $(SET_LIB_PATH) \
+	  (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) check); \
+	else \
+	  true; \
+	fi
+
+.PHONY: check-c++
+check-c++:
+	@if [ -f ./gcc/Makefile ] ; then \
+	  r=`${PWD}`; export r; \
+	  s=`cd $(srcdir); ${PWD}`; export s; \
+	  $(SET_LIB_PATH) \
+	  (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) check-c++); \
+	  $(MAKE) check-target-libstdc++-v3; \
+	else \
+	  true; \
+	fi 
+
+.PHONY: install-gcc
+install-gcc:
+	@if [ -f ./gcc/Makefile ] ; then \
+	  r=`${PWD}`; export r; \
+	  s=`cd $(srcdir); ${PWD}`; export s; \
+	  $(SET_LIB_PATH) \
+	  (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
+	else \
+	  true; \
+	fi
+
+.PHONY: install-gcc-cross
+install-gcc-cross:
+	@if [ -f ./gcc/Makefile ] ; then \
+	  r=`${PWD}`; export r; \
+	  s=`cd $(srcdir); ${PWD}`; export s; \
+	  $(SET_LIB_PATH) \
+	  (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) LANGUAGES="c c++" install); \
+	else \
+	  true; \
+	fi
+# EXPERIMENTAL STUFF
+# This rule is used to install the modules which use FLAGS_TO_PASS.
+# To build a target install-X means to cd to X and make install.
+.PHONY: install-dosrel
+install-dosrel: installdirs info
+	@dir=`echo $@ | sed -e 's/install-//'`; \
+	if [ -f ./$${dir}/Makefile ] ; then \
+	  r=`${PWD}`; export r; \
+	  s=`cd $(srcdir); ${PWD}`; export s; \
+	  $(SET_LIB_PATH) \
+	  (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
+	else \
+	  true; \
+	fi
+
+install-dosrel-fake:
+
+ALL_GCC = all-gcc
+ALL_GCC_C = $(ALL_GCC) all-target-newlib all-target-libgloss
+ALL_GCC_CXX = $(ALL_GCC_C) all-target-libstdc++-v3
+
+# This is a list of inter-dependencies among modules.
+all-ash:
+all-autoconf: all-m4 all-texinfo
+all-automake: all-m4 all-texinfo
+all-bash:
+all-bfd: all-libiberty all-intl
+all-binutils: all-libiberty all-opcodes all-bfd all-flex all-bison all-byacc all-intl
+all-bison: all-texinfo
+configure-target-boehm-gc: $(ALL_GCC_C) configure-target-qthreads
+all-target-boehm-gc: configure-target-boehm-gc
+all-byacc:
+all-bzip2:
+all-db:
+all-dejagnu: all-tcl all-expect all-tk
+all-diff: all-libiberty
+all-etc:
+configure-target-examples: $(ALL_GCC_C)
+all-target-examples: configure-target-examples
+all-expect: all-tcl all-tk
+all-fileutils: all-libiberty
+all-findutils:
+all-find:
+all-flex: all-libiberty all-bison all-byacc
+all-gas: all-libiberty all-opcodes all-bfd all-intl
+all-gawk:
+all-gcc: all-bison all-byacc all-binutils all-gas all-ld all-zlib
+all-bootstrap: all-libiberty all-texinfo all-bison all-byacc all-binutils all-gas all-ld all-zlib
+GDB_TK = all-tk all-tcl all-itcl all-tix all-libgui
+all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-bison all-byacc all-sim $(gdbnlmrequirements) $(GDB_TK)
+all-gettext:
+all-gnuserv:
+configure-target-gperf: $(ALL_GCC_CXX)
+all-target-gperf: configure-target-gperf all-target-libiberty all-target-libstdc++-v3
+all-gprof: all-libiberty all-bfd all-opcodes all-intl
+all-grep: all-libiberty
+all-gui: all-gdb all-libproc
+all-guile:
+all-gzip: all-libiberty
+all-hello: all-libiberty
+all-indent:
+all-intl:
+all-itcl: all-tcl all-tk
+all-ld: all-libiberty all-bfd all-opcodes all-bison all-byacc all-flex all-intl
+configure-target-libgloss: $(ALL_GCC)
+all-target-libgloss: configure-target-libgloss configure-target-newlib
+all-libgui: all-tcl all-tk all-itcl
+all-libiberty:
+
+all-build-libiberty: configure-build-libiberty
+
+configure-target-libffi: $(ALL_GCC_C) 
+all-target-libffi: configure-target-libffi
+configure-target-libjava: $(ALL_GCC_C) configure-target-zlib configure-target-boehm-gc configure-target-qthreads configure-target-libffi
+all-target-libjava: configure-target-libjava all-fastjar all-target-zlib all-target-boehm-gc all-target-qthreads all-target-libffi
+configure-target-libstdc++-v3: $(ALL_GCC_C)
+all-target-libstdc++-v3: configure-target-libstdc++-v3 all-target-libiberty
+all-libtool:
+configure-target-libf2c: $(ALL_GCC_C)
+all-target-libf2c: configure-target-libf2c all-target-libiberty
+configure-target-libobjc: $(ALL_GCC_C)
+all-target-libobjc: configure-target-libobjc all-target-libiberty
+all-m4: all-libiberty all-texinfo
+all-make: all-libiberty
+all-mmalloc:
+configure-target-newlib: $(ALL_GCC)
+all-target-newlib: configure-target-newlib
+configure-target-libtermcap: $(ALL_GCC_C)
+all-target-libtermcap: configure-target-libtermcap
+all-opcodes: all-bfd all-libiberty
+all-patch: all-libiberty
+all-perl:
+all-prms: all-libiberty
+configure-target-qthreads: $(ALL_GCC_C)
+all-target-qthreads: configure-target-qthreads
+all-rcs:
+all-readline:
+all-recode: all-libiberty
+all-sed: all-libiberty
+all-send-pr: all-prms
+all-shellutils:
+all-sid: all-tcl all-tk
+all-sim: all-libiberty all-bfd all-opcodes all-readline
+all-snavigator: all-tcl all-tk all-itcl all-tix all-db all-grep all-libgui
+all-tar: all-libiberty
+all-tcl:
+all-tclX: all-tcl all-tk
+all-tk: all-tcl
+all-texinfo: all-libiberty
+all-textutils:
+all-time:
+all-tix: all-tcl all-tk
+all-wdiff:
+configure-target-winsup: $(ALL_GCC_C)
+all-target-winsup: all-target-libiberty all-target-libtermcap configure-target-winsup
+all-uudecode: all-libiberty
+all-zip:
+all-zlib:
+configure-target-zlib: $(ALL_GCC_C)
+all-target-zlib: configure-target-zlib
+all-fastjar: all-zlib all-libiberty
+configure-target-fastjar: configure-target-zlib
+all-target-fastjar: configure-target-fastjar all-target-zlib all-target-libiberty
+configure-target-libiberty: $(ALL_GCC_C)
+all-target-libiberty: configure-target-libiberty
+all-target: $(ALL_TARGET_MODULES)
+install-target: $(INSTALL_TARGET_MODULES)
+install-gdb: install-tcl install-tk install-itcl install-tix install-libgui
+install-sid: install-tcl install-tk
+### other supporting targets
+
+MAKEDIRS= \
+	$(DESTDIR)$(prefix) \
+	$(DESTDIR)$(exec_prefix)
+.PHONY: installdirs
+installdirs: mkinstalldirs
+	$(SHELL) $(srcdir)/mkinstalldirs $(MAKEDIRS)
+
+dir.info: do-install-info
+	if [ -f $(srcdir)/texinfo/gen-info-dir ] ; then \
+	  $(srcdir)/texinfo/gen-info-dir $(infodir) $(srcdir)/texinfo/dir.info-template > dir.info.new ; \
+	  mv -f dir.info.new dir.info ; \
+	else true ; \
+	fi
+
+dist:
+	@echo "Building a full distribution of this tree isn't done"
+	@echo "via 'make dist'.  Check out the etc/ subdirectory" 
+
+etags tags: TAGS
+
+# Right now this just builds TAGS in each subdirectory.  emacs19 has the
+# ability to use several tags files at once, so there is probably no need
+# to combine them into one big TAGS file (like CVS 1.3 does).  We could
+# (if we felt like it) have this Makefile write a piece of elisp which
+# the user could load to tell emacs19 where all the TAGS files we just
+# built are.
+TAGS: do-TAGS
+
+# Rebuilding Makefile.in, using autogen.
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.tpl $(srcdir)/Makefile.def
+	cd $(srcdir) && autogen Makefile.def
+
+# with the gnu make, this is done automatically.
+
+Makefile: Makefile.in configure.in $(host_makefile_frag) $(target_makefile_frag) $(gcc_version_trigger)
+	$(SHELL) ./config.status
+
+#
+# Support for building net releases
+
+# Files in devo used in any net release.
+# ChangeLog omitted because it may refer to files which are not in this
+# distribution (perhaps it would be better to include it anyway).
+DEVO_SUPPORT= README Makefile.in configure configure.in \
+	config.guess config.if config.sub config move-if-change \
+	mpw-README mpw-build.in mpw-config.in mpw-configure mpw-install \
+	COPYING COPYING.LIB install-sh config-ml.in symlink-tree \
+	mkinstalldirs ltconfig ltmain.sh missing ylwrap \
+	libtool.m4 gettext.m4 ltcf-c.sh ltcf-cxx.sh ltcf-gcj.sh
+
+# Files in devo/etc used in any net release.
+# ChangeLog omitted because it may refer to files which are not in this
+# distribution (perhaps it would be better to include it anyway).
+ETC_SUPPORT= Makefile.in configure configure.in standards.texi \
+	make-stds.texi standards.info* configure.texi configure.info* \
+	configbuild.* configdev.*
+
+
+# When you use `make setup-dirs' or `make taz' you should always redefine
+# this macro.
+SUPPORT_FILES = list-of-support-files-for-tool-in-question
+
+# NOTE: No double quotes in the below.  It is used within shell script
+# as VER="$(VER)"
+VER = `	if grep 'AM_INIT_AUTOMAKE.*BFD_VERSION' $(TOOL)/configure.in >/dev/null 2>&1; then \
+	  sed < bfd/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
+	elif grep AM_INIT_AUTOMAKE $(TOOL)/configure.in >/dev/null 2>&1; then \
+	  sed < $(TOOL)/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
+	elif test -f $(TOOL)/version.in; then \
+	  head -1 $(TOOL)/version.in; \
+	elif grep VERSION $(TOOL)/Makefile.in > /dev/null 2>&1; then \
+	  sed < $(TOOL)/Makefile.in -n 's/^VERSION *= *//p'; \
+	else \
+	  echo VERSION; \
+	fi`
+PACKAGE = $(TOOL)
+
+.PHONY: taz
+taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
+	$(MAKE) -f Makefile.in do-proto-toplev \
+		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
+		MD5PROG="$(MD5PROG)" \
+		SUPPORT_FILES="$(SUPPORT_FILES)"
+	$(MAKE) -f Makefile.in do-md5sum \
+		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
+		MD5PROG="$(MD5PROG)" \
+		SUPPORT_FILES="$(SUPPORT_FILES)"
+	$(MAKE) -f Makefile.in do-tar \
+		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
+		MD5PROG="$(MD5PROG)" \
+		SUPPORT_FILES="$(SUPPORT_FILES)"
+	$(MAKE) -f Makefile.in do-bz2 \
+		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
+		MD5PROG="$(MD5PROG)" \
+		SUPPORT_FILES="$(SUPPORT_FILES)"
+
+.PHONY: gdb-tar
+gdb-tar: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
+	$(MAKE) -f Makefile.in do-proto-toplev \
+		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
+		MD5PROG="$(MD5PROG)" \
+		SUPPORT_FILES="$(SUPPORT_FILES)"
+	$(MAKE) -f Makefile.in do-md5sum \
+		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
+		MD5PROG="$(MD5PROG)" \
+		SUPPORT_FILES="$(SUPPORT_FILES)"
+	$(MAKE) -f Makefile.in do-djunpack \
+		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
+		MD5PROG="$(MD5PROG)" \
+		SUPPORT_FILES="$(SUPPORT_FILES)"
+	$(MAKE) -f Makefile.in do-tar \
+		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
+		MD5PROG="$(MD5PROG)" \
+		SUPPORT_FILES="$(SUPPORT_FILES)"
+
+.PHONY: gdb-taz
+gdb-taz: gdb-tar $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
+	$(MAKE) -f Makefile.in gdb-tar \
+		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
+		MD5PROG="$(MD5PROG)" \
+		SUPPORT_FILES="$(SUPPORT_FILES)"
+	$(MAKE) -f Makefile.in do-bz2 \
+		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
+		MD5PROG="$(MD5PROG)" \
+		SUPPORT_FILES="$(SUPPORT_FILES)"
+
+.PHONY: do-proto-toplev
+do-proto-toplev: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
+	echo "==> Making $(PACKAGE)-$(VER)/"
+	# Take out texinfo from a few places.
+	sed -e '/^all\.normal: /s/\all-texinfo //' \
+	    -e '/^	install-texinfo /d' \
+	<Makefile.in >tmp
+	mv -f tmp Makefile.in
+	#
+	./configure sun4
+	[ -z "$(CONFIGURE_TARGET_MODULES)" ] \
+	  || $(MAKE) $(CONFIGURE_TARGET_MODULES) \
+	    ALL_GCC="" ALL_GCC_C="" ALL_GCC_CXX="" \
+	    CC_FOR_TARGET="$(CC)" CXX_FOR_TARGET="$(CXX)"
+	# Make links, and run "make diststuff" or "make info" when needed.
+	rm -rf proto-toplev ; mkdir proto-toplev
+	set -e ; dirs="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
+	for d in $$dirs ; do \
+	  if [ -d $$d ]; then \
+	    if [ ! -f $$d/Makefile ] ; then true ; \
+	    elif grep '^diststuff:' $$d/Makefile >/dev/null ; then \
+		(cd $$d ; $(MAKE) diststuff ) || exit 1 ; \
+	    elif grep '^info:' $$d/Makefile >/dev/null ; then \
+	        (cd $$d ; $(MAKE) info ) || exit 1 ; \
+	    fi ; \
+	    if [ -d $$d/proto-$$d.dir ]; then \
+	      ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \
+	    else \
+	      ln -s ../$$d proto-toplev/$$d ; \
+	    fi ; \
+	  else ln -s ../$$d proto-toplev/$$d ; fi ; \
+	done
+	cd etc && $(MAKE) info
+	$(MAKE) distclean
+	#
+	mkdir proto-toplev/etc
+	(cd proto-toplev/etc; \
+	 for i in $(ETC_SUPPORT); do \
+		ln -s ../../etc/$$i . ; \
+	 done)
+	#
+	# Take out texinfo from configurable dirs
+	rm proto-toplev/configure.in
+	sed -e '/^host_tools=/s/texinfo //' \
+	    <configure.in >proto-toplev/configure.in
+	#
+	mkdir proto-toplev/texinfo
+	ln -s ../../texinfo/texinfo.tex		proto-toplev/texinfo/
+	if test -r texinfo/util/tex3patch ; then \
+	  mkdir proto-toplev/texinfo/util && \
+	  ln -s ../../../texinfo/util/tex3patch	proto-toplev/texinfo/util ; \
+	else true; fi
+	chmod -R og=u . || chmod og=u `find . -print`
+	#
+	# Create .gmo files from .po files.
+	for f in `find . -name '*.po' -type f -print`; do \
+	     msgfmt -o `echo $$f | sed -e 's/\.po$$/.gmo/'` $$f ; \
+	done
+	#
+	-rm -f $(PACKAGE)-$(VER)
+	ln -s proto-toplev $(PACKAGE)-$(VER)
+
+.PHONY: do-tar
+do-tar:
+	echo "==> Making $(PACKAGE)-$(VER).tar"
+	-rm -f $(PACKAGE)-$(VER).tar
+	find $(PACKAGE)-$(VER) -follow -name CVS -prune -o -type f -print \
+		| tar cTfh - $(PACKAGE)-$(VER).tar
+
+.PHONY: do-bz2
+do-bz2:
+	echo "==> Bzipping $(PACKAGE)-$(VER).tar.bz2"
+	-rm -f $(PACKAGE)-$(VER).tar.bz2
+	$(BZIPPROG) -v -9 $(PACKAGE)-$(VER).tar
+
+.PHONY: do-md5sum
+do-md5sum:
+	echo "==> Adding md5 checksum to top-level directory"
+	cd proto-toplev && find * -follow -name CVS -prune -o -type f -print \
+		| xargs $(MD5PROG) > ../md5.sum
+	mv md5.sum proto-toplev
+
+.PHONY: do-djunpack
+do-djunpack:
+	echo "==> Adding updated djunpack.bat to top-level directory"
+	echo - 's /gdb-[0-9\.]*/gdb-'"$(VER)"'/'
+	sed < djunpack.bat > djunpack.new \
+		-e 's/gdb-[0-9][0-9\.]*/gdb-'"$(VER)"'/'
+	mv djunpack.new djunpack.bat
+	-rm -f proto-toplev/djunpack.bat
+	ln -s ../djunpack.bat proto-toplev/djunpack.bat
+
+TEXINFO_SUPPORT= texinfo/texinfo.tex
+DIST_SUPPORT= $(DEVO_SUPPORT) $(TEXINFO_SUPPORT)
+
+.PHONY: gas.tar.bz2
+GAS_SUPPORT_DIRS= bfd include libiberty opcodes intl setup.com makefile.vms mkdep
+gas.tar.bz2: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas
+	$(MAKE) -f Makefile.in taz TOOL=gas \
+		MD5PROG="$(MD5PROG)" \
+		SUPPORT_FILES="$(GAS_SUPPORT_DIRS)"
+
+# The FSF "binutils" release includes gprof and ld.
+.PHONY: binutils.tar.bz2
+BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld gprof intl setup.com makefile.vms mkdep
+binutils.tar.bz2: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils
+	$(MAKE) -f Makefile.in taz TOOL=binutils \
+		MD5PROG="$(MD5PROG)" \
+		SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS)"
+
+.PHONY: gas+binutils.tar.bz2
+GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof
+gas+binutils.tar.bz2: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas
+	$(MAKE) -f Makefile.in taz TOOL=gas \
+		MD5PROG="$(MD5PROG)" \
+		SUPPORT_FILES="$(GASB_SUPPORT_DIRS)"
+
+GNATS_SUPPORT_DIRS=include libiberty send-pr
+gnats.tar.bz2: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats
+	$(MAKE) -f  Makefile.in taz TOOL=gnats \
+		MD5PROG="$(MD5PROG)" \
+		SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)"
+
+.PHONY: gdb.tar.bz2
+GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline sim utils intl
+gdb.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
+	$(MAKE) -f Makefile.in gdb-taz TOOL=gdb \
+		MD5PROG="$(MD5PROG)" \
+		SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
+.PHONY: gdb.tar
+gdb.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
+	$(MAKE) -f Makefile.in gdb-tar TOOL=gdb \
+		MD5PROG="$(MD5PROG)" \
+		SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
+
+DEJAGNU_SUPPORT_DIRS=  tcl expect libiberty
+.PHONY: dejagnu.tar.bz2
+dejagnu.tar.bz2: $(DIST_SUPPORT) $(DEJAGNU_SUPPORT_DIRS) dejagnu
+	$(MAKE) -f Makefile.in taz TOOL=dejagnu \
+		MD5PROG="$(MD5PROG)" \
+		SUPPORT_FILES="$(DEJAGNU_SUPPORT_DIRS)"
+
+.PHONY: gdb+dejagnu.tar.bz2
+GDBD_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl expect dejagnu
+gdb+dejagnu.tar.bz2: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb
+	$(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE=gdb+dejagnu \
+		MD5PROG="$(MD5PROG)" \
+		SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)"
+.PHONY: gdb+dejagnu.tar
+gdb+dejagnu.tar: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb
+	$(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE=gdb+dejagnu \
+		MD5PROG="$(MD5PROG)" \
+		SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)"
+
+.PHONY: insight.tar.bz2
+INSIGHT_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl tk itcl tix libgui
+insight.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
+	$(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE=insight \
+		MD5PROG="$(MD5PROG)" \
+		SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"
+.PHONY: insight.tar
+insight.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
+	$(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE=insight \
+		MD5PROG="$(MD5PROG)" \
+		SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"
+
+.PHONY: insight+dejagnu.tar.bz2
+INSIGHTD_SUPPORT_DIRS= $(INSIGHT_SUPPORT_DIRS) expect dejagnu
+insight+dejagnu.tar.bz2: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb
+	$(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE="insight+dejagnu" \
+		MD5PROG="$(MD5PROG)" \
+		SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)"
+.PHONY: insight+dejagnu.tar
+insight+dejagnu.tar: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb
+	$(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE="insight+dejagnu" \
+		MD5PROG="$(MD5PROG)" \
+		SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)"
+
+.PHONY: newlib.tar.bz2
+NEWLIB_SUPPORT_DIRS=libgloss
+# taz configures for the sun4 target which won't configure newlib.
+# We need newlib configured so that the .info files are made.
+# Unfortunately, it is not enough to just configure newlib separately:
+# taz will build the .info files but since SUBDIRS won't contain newlib,
+# distclean won't be run (leaving Makefile, config.status, and the tmp files
+# used in building the .info files, eg: *.def, *.ref).
+# The problem isn't solvable however without a lot of extra work because
+# target libraries are built in subdir $(target_alias) which gets nuked during
+# the make distclean.  For now punt on the issue of shipping newlib info files
+# with newlib net releases and wait for a day when some native target (sun4?)
+# supports newlib (if only minimally).
+newlib.tar.bz2: $(DIST_SUPPORT) $(NEWLIB_SUPPORT_DIRS) newlib
+	$(MAKE) -f Makefile.in taz TOOL=newlib \
+		MD5PROG="$(MD5PROG)" \
+		SUPPORT_FILES="$(NEWLIB_SUPPORT_DIRS)" \
+		DEVO_SUPPORT="$(DEVO_SUPPORT) COPYING.NEWLIB" newlib
+
+.NOEXPORT:
+MAKEOVERRIDES=
+
+# end of Makefile.in
diff --git a/configure.in b/configure.in
index 2491fa77e4..8dab42bdfa 100644
--- a/configure.in
+++ b/configure.in
@@ -80,22 +80,6 @@ target_tools="target-examples target-groff target-gperf"
 
 ################################################################################
 
-## These two lists are of directories that are to be removed from the
-## ${configdirs} list for either cross-compilations or for native-
-## compilations.  For example, it doesn't make that much sense to
-## cross-compile Emacs, nor is it terribly useful to compile target-libiberty in
-## a native environment.  
-
-# directories to be built in the native environment only
-#
-# This must be a single line because of the way it is searched by grep in
-# the code below.
-native_only="autoconf automake libtool fileutils find gawk gettext grep gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff gprof target-groff guile perl time ash bash bzip2 prms snavigator gnuserv target-gperf"
-
-# directories to be built in a cross environment only
-#
-cross_only="target-libgloss target-newlib target-opcodes"
-
 ## All tools belong in one of the four categories, and are assigned above
 ## We assign ${configdirs} this way to remove all embedded newlines.  This
 ## is important because configure will choke if they ever get through.
@@ -184,8 +168,12 @@ case ${with_x} in
 esac
 
 # Some tools are only suitable for building in a "native" situation.
-# Remove these if host!=target.  Similarly, some are only suitable
-# for cross toolchains; remove if host=target.
+# Remove these if host!=target.  
+native_only="autoconf automake libtool fileutils find gawk gettext grep gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff gprof target-groff guile perl time ash bash bzip2 prms snavigator gnuserv target-gperf"
+
+# Similarly, some are only suitable for cross toolchains.
+# Remove these if host=target.
+cross_only="target-libgloss target-newlib target-opcodes"
 
 case $is_cross_compiler in
   no) skipdirs="${skipdirs} ${cross_only}" ;;
@@ -755,8 +743,7 @@ for dir in . $skipdirs $noconfigdirs ; do
   dirname=`echo $dir | sed -e s/target-//g`
   if test $dir != .  && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
     configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
-    if test -r $srcdir/$dirname/configure \
-	|| test -r $srcdir/$dirname/configure.in ; then
+    if test -r $srcdir/$dirname/configure ; then
       if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
 	true
       else
@@ -766,8 +753,7 @@ for dir in . $skipdirs $noconfigdirs ; do
   fi
   if test $dir != . && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
     target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"`
-    if test -r $srcdir/$dirname/configure \
-	|| test -r $srcdir/$dirname/configure.in ; then
+    if test -r $srcdir/$dirname/configure ; then
       if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
 	true
       else
@@ -783,7 +769,7 @@ if test -n "${target_configdirs}" ; then
   others=
   for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
     if test "$i" != "libiberty" ; then
-      if test -r $srcdir/$i/configure || test -r $srcdir/$i/configure.in ; then
+      if test -r $srcdir/$i/configure ; then
 	others=yes;
 	break;
       fi