Add more missing prototypes

1 files changed, 77 insertions, 84 deletions

diff --git a/bfd/coff-w65.c b/bfd/coff-w65.c
index df960ef610..8ce8ffe748 100644
--- a/bfd/coff-w65.c
+++ b/bfd/coff-w65.c
@@ -1,5 +1,5 @@
 /* BFD back-end for WDC 65816 COFF binaries.
-   Copyright 1995, 1996, 1997, 1999, 2000 Free Software Foundation, Inc.
+   Copyright 1995, 1996, 1997, 1999, 2000, 2001 Free Software Foundation, Inc.
    Written by Steve Chamberlain, <sac@cygnus.com>.
 
 This file is part of BFD, the Binary File Descriptor library.
@@ -26,23 +26,28 @@ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
 #include "coff/internal.h"
 #include "libcoff.h"
 
+static int  select_reloc              PARAMS ((reloc_howto_type *));
+static void rtype2howto               PARAMS ((arelent *, struct internal_reloc *));
+static void reloc_processing          PARAMS ((arelent *, struct internal_reloc *, asymbol **, bfd *, asection *));
+static int  w65_reloc16_estimate    PARAMS ((bfd *, asection *, arelent *, unsigned int, struct bfd_link_info *));
+static void w65_reloc16_extra_cases PARAMS ((bfd *,struct bfd_link_info *, struct bfd_link_order *, arelent *, bfd_byte *, unsigned int *, unsigned int *));
+
 #define COFF_DEFAULT_SECTION_ALIGNMENT_POWER (1)
 static reloc_howto_type howto_table[] =
-{
-  HOWTO (R_W65_ABS8,    0,  0, 8, false, 0, complain_overflow_bitfield, 0, "abs8", true, 0x000000ff, 0x000000ff, false),
-  HOWTO (R_W65_ABS16,   1,  0, 16, false, 0, complain_overflow_bitfield, 0, "abs16", true, 0x0000ffff, 0x0000ffff, false),
-  HOWTO (R_W65_ABS24,   0,  2, 32, false, 0, complain_overflow_bitfield, 0, "abs24", true, 0x00ffffff, 0x00ffffff, false),
-  HOWTO (R_W65_ABS8S8,  0,  0, 8, false, 0, complain_overflow_bitfield, 0, ">abs8", true, 0x000000ff, 0x000000ff, false),
-  HOWTO (R_W65_ABS8S16, 0,  0, 8, false, 0, complain_overflow_bitfield, 0, "^abs8", true, 0x000000ff, 0x000000ff, false),
-  HOWTO (R_W65_ABS16S8, 1,  0, 16, false, 0, complain_overflow_bitfield, 0, ">abs16", true, 0x0000ffff, 0x0000ffff, false),
-  HOWTO (R_W65_ABS16S16,1,  0, 16, false, 0, complain_overflow_bitfield, 0, "^abs16", true, 0x0000ffff, 0x0000ffff, false),
-  HOWTO (R_W65_PCR8,    0,  0, 8, false, 0, complain_overflow_bitfield, 0, "pcrel8", true, 0x000000ff, 0x000000ff, true),
-  HOWTO (R_W65_PCR16,   1,  0, 16, false, 0, complain_overflow_bitfield, 0, "pcrel16", true, 0x0000ffff, 0x0000ffff, true),
-  HOWTO (R_W65_DP,    0,  0, 8, false, 0, complain_overflow_bitfield, 0, "dp", true, 0x000000ff, 0x000000ff, false),
-
-};
-
-/* Turn a howto into a reloc number */
+  {
+    HOWTO (R_W65_ABS8,    0,  0, 8,  false, 0, complain_overflow_bitfield, 0, "abs8", true, 0x000000ff, 0x000000ff, false),
+    HOWTO (R_W65_ABS16,   1,  0, 16, false, 0, complain_overflow_bitfield, 0, "abs16", true, 0x0000ffff, 0x0000ffff, false),
+    HOWTO (R_W65_ABS24,   0,  2, 32, false, 0, complain_overflow_bitfield, 0, "abs24", true, 0x00ffffff, 0x00ffffff, false),
+    HOWTO (R_W65_ABS8S8,  0,  0, 8,  false, 0, complain_overflow_bitfield, 0, ">abs8", true, 0x000000ff, 0x000000ff, false),
+    HOWTO (R_W65_ABS8S16, 0,  0, 8,  false, 0, complain_overflow_bitfield, 0, "^abs8", true, 0x000000ff, 0x000000ff, false),
+    HOWTO (R_W65_ABS16S8, 1,  0, 16, false, 0, complain_overflow_bitfield, 0, ">abs16", true, 0x0000ffff, 0x0000ffff, false),
+    HOWTO (R_W65_ABS16S16,1,  0, 16, false, 0, complain_overflow_bitfield, 0, "^abs16", true, 0x0000ffff, 0x0000ffff, false),
+    HOWTO (R_W65_PCR8,    0,  0, 8,  false, 0, complain_overflow_bitfield, 0, "pcrel8", true, 0x000000ff, 0x000000ff, true),
+    HOWTO (R_W65_PCR16,   1,  0, 16, false, 0, complain_overflow_bitfield, 0, "pcrel16", true, 0x0000ffff, 0x0000ffff, true),
+    HOWTO (R_W65_DP,      0,  0, 8,  false, 0, complain_overflow_bitfield, 0, "dp", true, 0x000000ff, 0x000000ff, false),
+  };
+
+/* Turn a howto into a reloc number.  */
 
 #define SELECT_RELOC(x,howto) \
   { x.r_type = select_reloc(howto); }
@@ -65,20 +70,19 @@ select_reloc (howto)
   return howto->type ;
 }
 
-/* Code to turn a r_type into a howto ptr, uses the above howto table
-   */
+/* Code to turn a r_type into a howto ptr, uses the above howto table.  */
 
 static void
 rtype2howto (internal, dst)
      arelent *internal;
      struct internal_reloc *dst;
 {
-      internal->howto = howto_table + dst->r_type - 1;
+  internal->howto = howto_table + dst->r_type - 1;
 }
 
 #define RTYPE2HOWTO(internal, relocentry) rtype2howto(internal,relocentry)
 
-/* Perform any necessary magic to the addend in a reloc entry */
+/* Perform any necessary magic to the addend in a reloc entry.  */
 
 #define CALC_ADDEND(abfd, symbol, ext_reloc, cache_ptr) \
  cache_ptr->addend =  ext_reloc.r_offset;
@@ -98,13 +102,9 @@ reloc_processing (relent, reloc, symbols, abfd, section)
   rtype2howto (relent, reloc);
 
   if (((int) reloc->r_symndx) > 0)
-    {
-      relent->sym_ptr_ptr = symbols + obj_convert (abfd)[reloc->r_symndx];
-    }
+    relent->sym_ptr_ptr = symbols + obj_convert (abfd)[reloc->r_symndx];
   else
-    {
-      relent->sym_ptr_ptr = (asymbol **)&(bfd_abs_symbol);
-    }
+    relent->sym_ptr_ptr = (asymbol **)&(bfd_abs_symbol);
 
   relent->addend = reloc->r_offset;
 
@@ -113,7 +113,7 @@ reloc_processing (relent, reloc, symbols, abfd, section)
 }
 
 static int
-h8300_reloc16_estimate(abfd, input_section, reloc, shrink, link_info)
+w65_reloc16_estimate (abfd, input_section, reloc, shrink, link_info)
      bfd *abfd;
      asection *input_section;
      arelent *reloc;
@@ -127,7 +127,7 @@ h8300_reloc16_estimate(abfd, input_section, reloc, shrink, link_info)
   /* The address of the thing to be relocated will have moved back by
    the size of the shrink  - but we don't change reloc->address here,
    since we need it to know where the relocation lives in the source
-   uncooked section */
+   uncooked section.  */
 
   /*  reloc->address -= shrink;   conceptual */
 
@@ -140,75 +140,69 @@ h8300_reloc16_estimate(abfd, input_section, reloc, shrink, link_info)
       shrink+=2;
       break;
 
-      /* Thing is a move one byte */
+      /* Thing is a move one byte.  */
     case R_MOV16B1:
-      value = bfd_coff_reloc16_get_value(reloc, link_info, input_section);
+      value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
 
       if (value >= 0xff00)
 	{
-
 	  /* Change the reloc type from 16bit, possible 8 to 8bit
-	     possible 16 */
+	     possible 16.  */
 	  reloc->howto = reloc->howto + 1;
-	  /* The place to relc moves back by one */
-	  /* This will be two bytes smaller in the long run */
-	  shrink +=2 ;
-	  bfd_perform_slip(abfd, 2, input_section, address);
+	  /* The place to relc moves back by one.  */
+	  /* This will be two bytes smaller in the long run.  */
+	  shrink += 2;
+	  bfd_perform_slip (abfd, 2, input_section, address);
 	}
 
       break;
       /* This is the 24 bit branch which could become an 8 bitter,
-       the relocation points to the first byte of the insn, not the
-       actual data */
+	 the relocation points to the first byte of the insn, not the
+	 actual data.  */
 
     case R_JMPL1:
-      value = bfd_coff_reloc16_get_value(reloc, link_info, input_section);
+      value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
 
       dot = input_section->output_section->vma +
 	input_section->output_offset + address;
 
       /* See if the address we're looking at within 127 bytes of where
 	 we are, if so then we can use a small branch rather than the
-	 jump we were going to */
-
-      gap = value - dot ;
+	 jump we were going to.  */
+      gap = value - dot;
 
-      if (-120 < (long)gap && (long)gap < 120 )
+      if (-120 < (long) gap && (long) gap < 120)
 	{
-
 	  /* Change the reloc type from 24bit, possible 8 to 8bit
-	     possible 32 */
+	     possible 32.  */
 	  reloc->howto = reloc->howto + 1;
-	  /* This will be two bytes smaller in the long run */
-	  shrink +=2 ;
-	  bfd_perform_slip(abfd, 2, input_section, address);
+	  /* This will be two bytes smaller in the long run.  */
+	  shrink += 2;
+	  bfd_perform_slip (abfd, 2, input_section, address);
 	}
       break;
 
     case R_JMP1:
-
-      value = bfd_coff_reloc16_get_value(reloc, link_info, input_section);
+      value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
 
       dot = input_section->output_section->vma +
 	input_section->output_offset + address;
 
       /* See if the address we're looking at within 127 bytes of where
 	 we are, if so then we can use a small branch rather than the
-	 jump we were going to */
-
+	 jump we were going to.  */
       gap = value - (dot - shrink);
 
-      if (-120 < (long)gap && (long)gap < 120 )
+      if (-120 < (long) gap && (long) gap < 120)
 	{
-
 	  /* Change the reloc type from 16bit, possible 8 to 8bit
-	     possible 16 */
+	     possible 16.  */
 	  reloc->howto = reloc->howto + 1;
-	  /* The place to relc moves back by one */
+	  /* The place to relc moves back by one.  */
 
-	  /* This will be two bytes smaller in the long run */
-	  shrink +=2 ;
-	  bfd_perform_slip(abfd, 2, input_section, address);
+	  /* This will be two bytes smaller in the long run.  */
+	  shrink += 2;
+	  bfd_perform_slip (abfd, 2, input_section, address);
 	}
       break;
     }
@@ -216,19 +210,17 @@ h8300_reloc16_estimate(abfd, input_section, reloc, shrink, link_info)
   return shrink;
 }
 
-/* First phase of a relaxing link */
+/* First phase of a relaxing link.  */
 
 /* Reloc types
    large		small
    R_MOV16B1		R_MOV16B2	mov.b with 16bit or 8 bit address
    R_JMP1		R_JMP2		jmp or pcrel branch
    R_JMPL1		R_JMPL_B8	24jmp or pcrel branch
-   R_MOV24B1		R_MOV24B2	24 or 8 bit reloc for mov.b
-
-*/
+   R_MOV24B1		R_MOV24B2	24 or 8 bit reloc for mov.b  */
 
 static void
-h8300_reloc16_extra_cases (abfd, link_info, link_order, reloc, data, src_ptr,
+w65_reloc16_extra_cases (abfd, link_info, link_order, reloc, data, src_ptr,
 			   dst_ptr)
      bfd *abfd;
      struct bfd_link_info *link_info;
@@ -270,7 +262,7 @@ h8300_reloc16_extra_cases (abfd, link_info, link_order, reloc, data, src_ptr,
       {
 	unsigned int gap = bfd_coff_reloc16_get_value (reloc, link_info,
 						       input_section);
-	gap >>=16;
+	gap >>= 16;
 	bfd_put_8 (abfd, gap, data + dst_address);
 	dst_address += 1;
 	src_address += 1;
@@ -313,7 +305,7 @@ h8300_reloc16_extra_cases (abfd, link_info, link_order, reloc, data, src_ptr,
 	unsigned int gap = bfd_coff_reloc16_get_value (reloc, link_info,
 						       input_section);
 	bfd_put_16 (abfd, gap, data + dst_address);
-	bfd_put_8 (abfd, gap>>16, data+dst_address+2);
+	bfd_put_8 (abfd, gap >> 16, data+dst_address + 2);
 	dst_address += 3;
 	src_address += 3;
       }
@@ -328,13 +320,14 @@ h8300_reloc16_extra_cases (abfd, link_info, link_order, reloc, data, src_ptr,
 	    + link_order->u.indirect.section->output_section->vma;
 
 	gap -= dot + 1;
-	if (gap < -128 || gap > 127) {
-	  if (! ((*link_info->callbacks->reloc_overflow)
-		 (link_info, bfd_asymbol_name (*reloc->sym_ptr_ptr),
-		  reloc->howto->name, reloc->addend, input_section->owner,
-		  input_section, reloc->address)))
-	    abort ();
-	}
+	if (gap < -128 || gap > 127)
+	  {
+	    if (! ((*link_info->callbacks->reloc_overflow)
+		   (link_info, bfd_asymbol_name (*reloc->sym_ptr_ptr),
+		    reloc->howto->name, reloc->addend, input_section->owner,
+		    input_section, reloc->address)))
+	      abort ();
+	  }
 	bfd_put_8 (abfd, gap, data + dst_address);
 	dst_address += 1;
 	src_address += 1;
@@ -350,14 +343,15 @@ h8300_reloc16_extra_cases (abfd, link_info, link_order, reloc, data, src_ptr,
 	    + link_order->u.indirect.section->output_section->vma;
 
 	/* This wraps within the page, so ignore the relativeness, look at the
-	   high part */
-	if ((gap & 0xf0000) != (dot & 0xf0000)) {
-	  if (! ((*link_info->callbacks->reloc_overflow)
-		 (link_info, bfd_asymbol_name (*reloc->sym_ptr_ptr),
-		  reloc->howto->name, reloc->addend, input_section->owner,
-		  input_section, reloc->address)))
-	    abort ();
-	}
+	   high part.  */
+	if ((gap & 0xf0000) != (dot & 0xf0000))
+	  {
+	    if (! ((*link_info->callbacks->reloc_overflow)
+		   (link_info, bfd_asymbol_name (*reloc->sym_ptr_ptr),
+		    reloc->howto->name, reloc->addend, input_section->owner,
+		    input_section, reloc->address)))
+	      abort ();
+	  }
 
 	gap -= dot + 2;
 	bfd_put_16 (abfd, gap, data + dst_address);
@@ -372,11 +366,10 @@ h8300_reloc16_extra_cases (abfd, link_info, link_order, reloc, data, src_ptr,
     }
   *src_ptr = src_address;
   *dst_ptr = dst_address;
-
 }
 
-#define coff_reloc16_extra_cases h8300_reloc16_extra_cases
-#define coff_reloc16_estimate h8300_reloc16_estimate
+#define coff_reloc16_extra_cases w65_reloc16_extra_cases
+#define coff_reloc16_estimate w65_reloc16_estimate
 
 #include "coffcode.h"