remove trailing whitespaces in manpages

5 files changed, 71 insertions, 71 deletions

diff --git a/tools/ciptool.1 b/tools/ciptool.1
index 982f414b0..65d903d3c 100644
--- a/tools/ciptool.1
+++ b/tools/ciptool.1
@@ -54,12 +54,12 @@ offers CIP support.
 Connect the local device to the remote Bluetooth device on the
 specified PSM number. If no PSM is specified, it will use the
 SDP to retrieve it from the remote device.
-.TP 
+.TP
 .BI release " [bdaddr]"
 Release a connection to the specific device. If no address is
 given and only one device is connected this will be released.
-.TP 
-.BI loopback " <bdaddr> [psm]" 
+.TP
+.BI loopback " <bdaddr> [psm]"
 Create a connection to the remote device for Bluetooth testing.
 This command will not provide a CAPI controller, because it is
 only for testing the CAPI Message Transport Protocol.
diff --git a/tools/dfutool.1 b/tools/dfutool.1
index 78b1fe7fb..115114b8b 100644
--- a/tools/dfutool.1
+++ b/tools/dfutool.1
@@ -45,7 +45,7 @@ Change DFU specific values in the firmware file.
 .TP
 .BI upgrade " <dfu-file>"
 Upgrade the device with a new firmware.
-.TP 
+.TP
 .BI archive " <dfu-file>"
 Archive the current firmware of the device.
 .SH AUTHOR
diff --git a/tools/hciattach.8 b/tools/hciattach.8
index f9d295ebe..f75022243 100644
--- a/tools/hciattach.8
+++ b/tools/hciattach.8
@@ -5,7 +5,7 @@ hciattach \- attach serial devices via UART HCI to BlueZ stack
 .B hciattach
 .RB [\| \-n \|]
 .RB [\| \-p \|]
-.RB [\| \-t 
+.RB [\| \-t
 .IR timeout \|]
 .I tty
 .IR type \||\| id
@@ -108,10 +108,10 @@ instead.
 
 .TP
 .I bdaddr
-The 
+The
 .I bdaddr
-specifies the Bluetooth Address to use.  Some devices (like the STLC2500) 
-do not store the Bluetooth address in hardware memory.  Instead it must 
+specifies the Bluetooth Address to use.  Some devices (like the STLC2500)
+do not store the Bluetooth address in hardware memory.  Instead it must
 be uploaded during the initialization process.  If this argument
 is specified, then the address will be used to initialize the device.
 Otherwise, a default address will be used.
diff --git a/tools/hciconfig.8 b/tools/hciconfig.8
index f03b1c16a..13f52c6c8 100644
--- a/tools/hciconfig.8
+++ b/tools/hciconfig.8
@@ -27,7 +27,7 @@ the system. If
 .I hciX
 is given but no command is given, it prints basic information on device
 .I hciX
-only. Basic information is 
+only. Basic information is
 interface type, BD address, ACL MTU, SCO MTU, flags (up, init, running, raw,
 page scan enabled, inquiry scan enabled, inquiry, authentication enabled,
 encryption enabled).
diff --git a/tools/sdptool.1 b/tools/sdptool.1
index 686ec95ae..0f100e285 100644
--- a/tools/sdptool.1
+++ b/tools/sdptool.1
@@ -49,82 +49,82 @@
 .ds f2\"
 .ds f3\"
 .ds f4\"
-'\" t 
-.ta 8n 16n 24n 32n 40n 48n 56n 64n 72n  
-.TH "sdptool" "1" 
-.SH "NAME" 
-sdptool \(em control and interrogate SDP servers 
-.SH "SYNOPSIS" 
-.PP 
-\fBsdptool\fR [\fIoptions\fR]  {\fIcommand\fR}  [\fIcommand parameters\fR \&...]  
-.SH "DESCRIPTION" 
-.PP 
-\fBsdptool\fR provides the interface for 
-performing SDP queries on Bluetooth devices, and administering a 
-local \fBsdpd\fR. 
-.SH "COMMANDS" 
-.PP 
-The following commands are available.  In all cases \fBbdaddr\fR 
+'\" t
+.ta 8n 16n 24n 32n 40n 48n 56n 64n 72n
+.TH "sdptool" "1"
+.SH "NAME"
+sdptool \(em control and interrogate SDP servers
+.SH "SYNOPSIS"
+.PP
+\fBsdptool\fR [\fIoptions\fR]  {\fIcommand\fR}  [\fIcommand parameters\fR \&...]
+.SH "DESCRIPTION"
+.PP
+\fBsdptool\fR provides the interface for
+performing SDP queries on Bluetooth devices, and administering a
+local \fBsdpd\fR.
+.SH "COMMANDS"
+.PP
+The following commands are available.  In all cases \fBbdaddr\fR
 specifies the device to search or browse.  If \fIlocal\fP is used
 for \fBbdaddr\fP, then the local \fBsdpd\fR is searched.
 .PP
-Services are identified and manipulated with a 4-byte \fBrecord_handle\fP 
-(NOT the service name).  To find a service's \fBrecord_handle\fP, look for the 
+Services are identified and manipulated with a 4-byte \fBrecord_handle\fP
+(NOT the service name).  To find a service's \fBrecord_handle\fP, look for the
 "Service RecHandle" line in the \fBsearch\fP or \fBbrowse\fP results
-.IP "\fBsearch [--bdaddr bdaddr] [--tree] [--raw] [--xml] service_name\fP" 10 
-Search for services.. 
-.IP "" 10 
+.IP "\fBsearch [--bdaddr bdaddr] [--tree] [--raw] [--xml] service_name\fP" 10
+Search for services..
+.IP "" 10
 Known service names are DID, SP, DUN, LAN, FAX, OPUSH,
 FTP, HS, HF, HFAG, SAP, NAP, GN, PANU, HCRP, HID, CIP,
 A2SRC, A2SNK, AVRCT, AVRTG, UDIUE, UDITE and SYNCML.
-.IP "\fBbrowse [--tree] [--raw] [--xml] [bdaddr]\fP" 10 
-Browse all available services on the device 
-specified by a Bluetooth address as a parameter. 
+.IP "\fBbrowse [--tree] [--raw] [--xml] [bdaddr]\fP" 10
+Browse all available services on the device
+specified by a Bluetooth address as a parameter.
 .IP "\fBrecords [--tree] [--raw] [--xml] bdaddr\fP" 10
 Retrieve all possible service records.
-.IP "\fBadd [ --handle=N --channel=N ]\fP" 10 
-Add a service to the local  
-\fBsdpd\fR. 
+.IP "\fBadd [ --handle=N --channel=N ]\fP" 10
+Add a service to the local
+\fBsdpd\fR.
 .IP "" 10
 You can specify a handle for this record using
 the \fB--handle\fP option.
-.IP "" 10 
-You can specify a channel to add the service on 
-using the \fB--channel\fP option. 
-.IP "\fBdel record_handle\fP" 10 
-Remove a service from the local  
-\fBsdpd\fR. 
-.IP "\fBget [--tree] [--raw] [--xml] [--bdaddr bdaddr] record_handle\fP" 10 
-Retrieve a service from the local  
-\fBsdpd\fR. 
-.IP "\fBsetattr record_handle attrib_id attrib_value\fP" 10 
-Set or add an attribute to an SDP record. 
- 
-.IP "\fBsetseq record_handle attrib_id attrib_values\fP" 10 
-Set or add an attribute sequence to an 
-SDP record. 
-.SH "OPTIONS" 
-.IP "\fB--help\fP" 10 
-Displays help on using sdptool. 
- 
-.SH "EXAMPLES" 
-.PP 
+.IP "" 10
+You can specify a channel to add the service on
+using the \fB--channel\fP option.
+.IP "\fBdel record_handle\fP" 10
+Remove a service from the local
+\fBsdpd\fR.
+.IP "\fBget [--tree] [--raw] [--xml] [--bdaddr bdaddr] record_handle\fP" 10
+Retrieve a service from the local
+\fBsdpd\fR.
+.IP "\fBsetattr record_handle attrib_id attrib_value\fP" 10
+Set or add an attribute to an SDP record.
+
+.IP "\fBsetseq record_handle attrib_id attrib_values\fP" 10
+Set or add an attribute sequence to an
+SDP record.
+.SH "OPTIONS"
+.IP "\fB--help\fP" 10
+Displays help on using sdptool.
+
+.SH "EXAMPLES"
+.PP
 sdptool browse 00:80:98:24:15:6D
-.PP 
+.PP
 sdptool browse local
-.PP 
+.PP
 sdptool add DUN
-.PP 
+.PP
 sdptool del 0x10000
-.SH "BUGS" 
-.PP 
-Documentation needs improving. 
-.SH "AUTHOR" 
-.PP 
-Maxim Krasnyansky <maxk@qualcomm.com>. Man page written 
-by Edd Dumbill <ejad@debian.org>. 
- 
-.SH "SEE ALSO" 
-.PP 
+.SH "BUGS"
+.PP
+Documentation needs improving.
+.SH "AUTHOR"
+.PP
+Maxim Krasnyansky <maxk@qualcomm.com>. Man page written
+by Edd Dumbill <ejad@debian.org>.
+
+.SH "SEE ALSO"
+.PP
 sdpd(8)
-.\" created by instant / docbook-to-man, Thu 15 Jan 2004, 21:01 
+.\" created by instant / docbook-to-man, Thu 15 Jan 2004, 21:01