rhel: Remove sysvinit files. (#2114)

4 files changed, 0 insertions, 435 deletions

diff --git a/sysvinit/redhat/cloud-config b/sysvinit/redhat/cloud-config
deleted file mode 100755
index 6da8250c..00000000
--- a/sysvinit/redhat/cloud-config
+++ /dev/null
@@ -1,108 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2012 Yahoo! Inc.
-#
-# Author: Joshua Harlow <harlowja@yahoo-inc.com>
-#
-# This file is part of cloud-init. See LICENSE file for license information.
-
-# See: http://wiki.debian.org/LSBInitScripts
-# See: http://tiny.cc/czvbgw
-# See: http://www.novell.com/coolsolutions/feature/15380.html
-# Also based on dhcpd in RHEL (for comparison)
-
-### BEGIN INIT INFO
-# Provides:          cloud-config
-# Required-Start:    cloud-init cloud-init-local
-# Should-Start:      $time
-# Required-Stop:
-# Should-Stop:
-# Default-Start:     2 3 4 5
-# Default-Stop:      0 1 6
-# Short-Description: The config cloud-init job
-# Description:       Start cloud-init and runs the config phase
-#	and any associated config modules as desired.
-### END INIT INFO
-
-# Return values acc. to LSB for all commands but status:
-# 0	  - success
-# 1       - generic or unspecified error
-# 2       - invalid or excess argument(s)
-# 3       - unimplemented feature (e.g. "reload")
-# 4       - user had insufficient privileges
-# 5       - program is not installed
-# 6       - program is not configured
-# 7       - program is not running
-# 8--199  - reserved (8--99 LSB, 100--149 distrib, 150--199 appl)
-# 
-# Note that starting an already running service, stopping
-# or restarting a not-running service as well as the restart
-# with force-reload (in case signaling is not supported) are
-# considered a success.
-
-RETVAL=0
-
-prog="cloud-init"
-cloud_init="/usr/bin/cloud-init"
-conf="/etc/cloud/cloud.cfg"
-
-# If there exist sysconfig/default variable override files use it...
-[ -f /etc/sysconfig/cloud-init ] && . /etc/sysconfig/cloud-init
-[ -f /etc/default/cloud-init ] && . /etc/default/cloud-init
-
-start() {
-    [ -x $cloud_init ] || return 5
-    [ -f $conf ] || return 6
-
-    echo -n $"Starting $prog: "
-    $cloud_init $CLOUDINITARGS modules --mode config
-    RETVAL=$?
-    return $RETVAL
-}
-
-stop() {
-    echo -n $"Shutting down $prog: "
-    # No-op
-    RETVAL=7
-    return $RETVAL
-}
-
-case "$1" in
-    start)
-        start
-        RETVAL=$?
-	;;
-    stop)
-        stop
-        RETVAL=$?
-	;;
-    restart|try-restart|condrestart)
-        ## Stop the service and regardless of whether it was
-        ## running or not, start it again.
-        # 
-        ## Note: try-restart is now part of LSB (as of 1.9).
-        ## RH has a similar command named condrestart.
-        start
-        RETVAL=$?
-	;;
-    reload|force-reload)
-        # It does not support reload
-        RETVAL=3
-	;;
-    status)
-        echo -n $"Checking for service $prog:"
-        # Return value is slightly different for the status command:
-        # 0 - service up and running
-        # 1 - service dead, but /var/run/  pid  file exists
-        # 2 - service dead, but /var/lock/ lock file exists
-        # 3 - service not running (unused)
-        # 4 - service status unknown :-(
-        # 5--199 reserved (5--99 LSB, 100--149 distro, 150--199 appl.)
-        RETVAL=3
-	;;
-    *)
-        echo "Usage: $0 {start|stop|status|try-restart|condrestart|restart|force-reload|reload}"
-        RETVAL=3
-	;;
-esac
-
-exit $RETVAL
diff --git a/sysvinit/redhat/cloud-final b/sysvinit/redhat/cloud-final
deleted file mode 100755
index 8d6f7dfa..00000000
--- a/sysvinit/redhat/cloud-final
+++ /dev/null
@@ -1,108 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2012 Yahoo! Inc.
-#
-# Author: Joshua Harlow <harlowja@yahoo-inc.com>
-#
-# This file is part of cloud-init. See LICENSE file for license information.
-
-# See: http://wiki.debian.org/LSBInitScripts
-# See: http://tiny.cc/czvbgw
-# See: http://www.novell.com/coolsolutions/feature/15380.html
-# Also based on dhcpd in RHEL (for comparison)
-
-### BEGIN INIT INFO
-# Provides:          cloud-final
-# Required-Start:    $all cloud-config
-# Should-Start:      $time
-# Required-Stop:
-# Should-Stop:
-# Default-Start:     2 3 4 5
-# Default-Stop:      0 1 6
-# Short-Description: The final cloud-init job
-# Description:       Start cloud-init and runs the final phase
-#	and any associated final modules as desired.
-### END INIT INFO
-
-# Return values acc. to LSB for all commands but status:
-# 0	  - success
-# 1       - generic or unspecified error
-# 2       - invalid or excess argument(s)
-# 3       - unimplemented feature (e.g. "reload")
-# 4       - user had insufficient privileges
-# 5       - program is not installed
-# 6       - program is not configured
-# 7       - program is not running
-# 8--199  - reserved (8--99 LSB, 100--149 distrib, 150--199 appl)
-# 
-# Note that starting an already running service, stopping
-# or restarting a not-running service as well as the restart
-# with force-reload (in case signaling is not supported) are
-# considered a success.
-
-RETVAL=0
-
-prog="cloud-init"
-cloud_init="/usr/bin/cloud-init"
-conf="/etc/cloud/cloud.cfg"
-
-# If there exist sysconfig/default variable override files use it...
-[ -f /etc/sysconfig/cloud-init ] && . /etc/sysconfig/cloud-init
-[ -f /etc/default/cloud-init ] && . /etc/default/cloud-init
-
-start() {
-    [ -x $cloud_init ] || return 5
-    [ -f $conf ] || return 6
-
-    echo -n $"Starting $prog: "
-    $cloud_init $CLOUDINITARGS modules --mode final
-    RETVAL=$?
-    return $RETVAL
-}
-
-stop() {
-    echo -n $"Shutting down $prog: "
-    # No-op
-    RETVAL=7
-    return $RETVAL
-}
-
-case "$1" in
-    start)
-        start
-        RETVAL=$?
-	;;
-    stop)
-        stop
-        RETVAL=$?
-	;;
-    restart|try-restart|condrestart)
-        ## Stop the service and regardless of whether it was
-        ## running or not, start it again.
-        # 
-        ## Note: try-restart is now part of LSB (as of 1.9).
-        ## RH has a similar command named condrestart.
-        start
-        RETVAL=$?
-	;;
-    reload|force-reload)
-        # It does not support reload
-        RETVAL=3
-	;;
-    status)
-        echo -n $"Checking for service $prog:"
-        # Return value is slightly different for the status command:
-        # 0 - service up and running
-        # 1 - service dead, but /var/run/  pid  file exists
-        # 2 - service dead, but /var/lock/ lock file exists
-        # 3 - service not running (unused)
-        # 4 - service status unknown :-(
-        # 5--199 reserved (5--99 LSB, 100--149 distro, 150--199 appl.)
-        RETVAL=3
-	;;
-    *)
-        echo "Usage: $0 {start|stop|status|try-restart|condrestart|restart|force-reload|reload}"
-        RETVAL=3
-	;;
-esac
-
-exit $RETVAL
diff --git a/sysvinit/redhat/cloud-init b/sysvinit/redhat/cloud-init
deleted file mode 100755
index f14aca24..00000000
--- a/sysvinit/redhat/cloud-init
+++ /dev/null
@@ -1,108 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2012 Yahoo! Inc.
-#
-# Author: Joshua Harlow <harlowja@yahoo-inc.com>
-#
-# This file is part of cloud-init. See LICENSE file for license information.
-
-# See: http://wiki.debian.org/LSBInitScripts
-# See: http://tiny.cc/czvbgw
-# See: http://www.novell.com/coolsolutions/feature/15380.html
-# Also based on dhcpd in RHEL (for comparison)
-
-### BEGIN INIT INFO
-# Provides:          cloud-init
-# Required-Start:    $local_fs $network $named $remote_fs cloud-init-local
-# Should-Start:      $time
-# Required-Stop:
-# Should-Stop:
-# Default-Start:     2 3 4 5
-# Default-Stop:      0 1 6
-# Short-Description: The initial cloud-init job (net and fs contingent)
-# Description:       Start cloud-init and runs the initialization phase
-#	and any associated initial modules as desired.
-### END INIT INFO
-
-# Return values acc. to LSB for all commands but status:
-# 0	  - success
-# 1       - generic or unspecified error
-# 2       - invalid or excess argument(s)
-# 3       - unimplemented feature (e.g. "reload")
-# 4       - user had insufficient privileges
-# 5       - program is not installed
-# 6       - program is not configured
-# 7       - program is not running
-# 8--199  - reserved (8--99 LSB, 100--149 distrib, 150--199 appl)
-# 
-# Note that starting an already running service, stopping
-# or restarting a not-running service as well as the restart
-# with force-reload (in case signaling is not supported) are
-# considered a success.
-
-RETVAL=0
-
-prog="cloud-init"
-cloud_init="/usr/bin/cloud-init"
-conf="/etc/cloud/cloud.cfg"
-
-# If there exist sysconfig/default variable override files use it...
-[ -f /etc/sysconfig/cloud-init ] && . /etc/sysconfig/cloud-init
-[ -f /etc/default/cloud-init ] && . /etc/default/cloud-init
-
-start() {
-    [ -x $cloud_init ] || return 5
-    [ -f $conf ] || return 6
-
-    echo -n $"Starting $prog: "
-    $cloud_init $CLOUDINITARGS init
-    RETVAL=$?
-    return $RETVAL
-}
-
-stop() {
-    echo -n $"Shutting down $prog: "
-    # No-op
-    RETVAL=7
-    return $RETVAL
-}
-
-case "$1" in
-    start)
-        start
-        RETVAL=$?
-	;;
-    stop)
-        stop
-        RETVAL=$?
-	;;
-    restart|try-restart|condrestart)
-        ## Stop the service and regardless of whether it was
-        ## running or not, start it again.
-        # 
-        ## Note: try-restart is now part of LSB (as of 1.9).
-        ## RH has a similar command named condrestart.
-        start
-        RETVAL=$?
-	;;
-    reload|force-reload)
-        # It does not support reload
-        RETVAL=3
-	;;
-    status)
-        echo -n $"Checking for service $prog:"
-        # Return value is slightly different for the status command:
-        # 0 - service up and running
-        # 1 - service dead, but /var/run/  pid  file exists
-        # 2 - service dead, but /var/lock/ lock file exists
-        # 3 - service not running (unused)
-        # 4 - service status unknown :-(
-        # 5--199 reserved (5--99 LSB, 100--149 distro, 150--199 appl.)
-        RETVAL=3
-	;;
-    *)
-        echo "Usage: $0 {start|stop|status|try-restart|condrestart|restart|force-reload|reload}"
-        RETVAL=3
-	;;
-esac
-
-exit $RETVAL
diff --git a/sysvinit/redhat/cloud-init-local b/sysvinit/redhat/cloud-init-local
deleted file mode 100755
index 5788fcb1..00000000
--- a/sysvinit/redhat/cloud-init-local
+++ /dev/null
@@ -1,111 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2012 Yahoo! Inc.
-#
-# Author: Joshua Harlow <harlowja@yahoo-inc.com>
-#
-# This file is part of cloud-init. See LICENSE file for license information.
-
-# See: http://wiki.debian.org/LSBInitScripts
-# See: http://tiny.cc/czvbgw
-# See: http://www.novell.com/coolsolutions/feature/15380.html
-# Also based on dhcpd in RHEL (for comparison)
-
-# Bring this up before network, S10
-#chkconfig: 2345 09 91
-
-### BEGIN INIT INFO
-# Provides:          cloud-init-local
-# Required-Start:    $local_fs
-# Should-Start:      $time
-# Required-Stop:
-# Should-Stop:
-# Default-Start:     2 3 4 5
-# Default-Stop:      0 1 6
-# Short-Description: The initial cloud-init job (local fs contingent)
-# Description:       Start cloud-init and runs the initialization phases
-#	and any associated initial modules as desired.
-### END INIT INFO
-
-# Return values acc. to LSB for all commands but status:
-# 0	  - success
-# 1       - generic or unspecified error
-# 2       - invalid or excess argument(s)
-# 3       - unimplemented feature (e.g. "reload")
-# 4       - user had insufficient privileges
-# 5       - program is not installed
-# 6       - program is not configured
-# 7       - program is not running
-# 8--199  - reserved (8--99 LSB, 100--149 distrib, 150--199 appl)
-# 
-# Note that starting an already running service, stopping
-# or restarting a not-running service as well as the restart
-# with force-reload (in case signaling is not supported) are
-# considered a success.
-
-RETVAL=0
-
-prog="cloud-init"
-cloud_init="/usr/bin/cloud-init"
-conf="/etc/cloud/cloud.cfg"
-
-# If there exist sysconfig/default variable override files use it...
-[ -f /etc/sysconfig/cloud-init ] && . /etc/sysconfig/cloud-init
-[ -f /etc/default/cloud-init ] && . /etc/default/cloud-init
-
-start() {
-    [ -x $cloud_init ] || return 5
-    [ -f $conf ] || return 6
-
-    echo -n $"Starting $prog: "
-    $cloud_init $CLOUDINITARGS init --local
-    RETVAL=$?
-    return $RETVAL
-}
-
-stop() {
-    echo -n $"Shutting down $prog: "
-    # No-op
-    RETVAL=7
-    return $RETVAL
-}
-
-case "$1" in
-    start)
-        start
-        RETVAL=$?
-	;;
-    stop)
-        stop
-        RETVAL=$?
-	;;
-    restart|try-restart|condrestart)
-        ## Stop the service and regardless of whether it was
-        ## running or not, start it again.
-        # 
-        ## Note: try-restart is now part of LSB (as of 1.9).
-        ## RH has a similar command named condrestart.
-        start
-        RETVAL=$?
-	;;
-    reload|force-reload)
-        # It does not support reload
-        RETVAL=3
-	;;
-    status)
-        echo -n $"Checking for service $prog:"
-        # Return value is slightly different for the status command:
-        # 0 - service up and running
-        # 1 - service dead, but /var/run/  pid  file exists
-        # 2 - service dead, but /var/lock/ lock file exists
-        # 3 - service not running (unused)
-        # 4 - service status unknown :-(
-        # 5--199 reserved (5--99 LSB, 100--149 distro, 150--199 appl.)
-        RETVAL=3
-	;;
-    *)
-        echo "Usage: $0 {start|stop|status|try-restart|condrestart|restart|force-reload|reload}"
-        RETVAL=3
-	;;
-esac
-
-exit $RETVAL