Tutorial: Move step 10 to step 4

Shifts steps 4-9 to 5-10.

41 files changed, 223 insertions, 312 deletions

diff --git a/Help/guide/tutorial/Adding Generator Expressions.rst b/Help/guide/tutorial/Adding Generator Expressions.rst
index 7fcc97fcc2..0efce8d3bd 100644
--- a/Help/guide/tutorial/Adding Generator Expressions.rst
+++ b/Help/guide/tutorial/Adding Generator Expressions.rst
@@ -1,4 +1,4 @@
-Step 10: Adding Generator Expressions
+Step 4: Adding Generator Expressions
 =====================================
 
 :manual:`Generator expressions <cmake-generator-expressions(7)>` are evaluated
@@ -37,16 +37,16 @@ instead of using :variable:`CMAKE_CXX_STANDARD`.
 
 So the following code:
 
-.. literalinclude:: Step10/CMakeLists.txt
+.. literalinclude:: Step4/CMakeLists.txt
   :caption: CMakeLists.txt
   :name: CMakeLists.txt-CXX_STANDARD-variable-remove
   :language: cmake
   :start-after: project(Tutorial VERSION 1.0)
-  :end-before: # control where the static and shared libraries are built so that on windows
+  :end-before: # should we use our own math functions
 
 Would be replaced with:
 
-.. literalinclude:: Step11/CMakeLists.txt
+.. literalinclude:: Step5/CMakeLists.txt
   :caption: CMakeLists.txt
   :name: CMakeLists.txt-cxx_std-feature
   :language: cmake
@@ -69,12 +69,12 @@ warning flags vary based on the compiler we use the ``COMPILE_LANG_AND_ID``
 generator expression to control which flags to apply given a language and a set
 of compiler ids as seen below:
 
-.. literalinclude:: Step11/CMakeLists.txt
+.. literalinclude:: Step5/CMakeLists.txt
   :caption: CMakeLists.txt
   :name: CMakeLists.txt-target_compile_options-genex
   :language: cmake
   :start-after: # the BUILD_INTERFACE genex
-  :end-before: # control where the static and shared libraries are built so that on windows
+  :end-before: # should we use our own math functions
 
 Looking at this we see that the warning flags are encapsulated inside a
 ``BUILD_INTERFACE`` condition. This is done so that consumers of our installed
diff --git a/Help/guide/tutorial/Adding Support for a Testing Dashboard.rst b/Help/guide/tutorial/Adding Support for a Testing Dashboard.rst
index 9ec195c8f7..45d5976981 100644
--- a/Help/guide/tutorial/Adding Support for a Testing Dashboard.rst
+++ b/Help/guide/tutorial/Adding Support for a Testing Dashboard.rst
@@ -1,4 +1,4 @@
-Step 5: Adding Support for a Testing Dashboard
+Step 6: Adding Support for a Testing Dashboard
 ==============================================
 
 Adding support for submitting our test results to a dashboard is simple. We
@@ -9,7 +9,7 @@ we include the :module:`CTest` module in our top-level ``CMakeLists.txt``.
 
 Replace:
 
-.. literalinclude:: Step5/CMakeLists.txt
+.. literalinclude:: Step6/CMakeLists.txt
   :caption: CMakeLists.txt
   :name: CMakeLists.txt-enable_testing-remove
   :language: cmake
@@ -18,7 +18,7 @@ Replace:
 
 With:
 
-.. literalinclude:: Step6/CMakeLists.txt
+.. literalinclude:: Step7/CMakeLists.txt
   :caption: CMakeLists.txt
   :name: CMakeLists.txt-include-CTest
   :language: cmake
@@ -46,7 +46,7 @@ downloaded from the ``Settings`` page of the project on the CDash
 instance that will host and display the test results.  Once downloaded from
 CDash, the file should not be modified locally.
 
-.. literalinclude:: Step6/CTestConfig.cmake
+.. literalinclude:: Step7/CTestConfig.cmake
   :caption: CTestConfig.cmake
   :name: CTestConfig.cmake
   :language: cmake
diff --git a/Help/guide/tutorial/Adding System Introspection.rst b/Help/guide/tutorial/Adding System Introspection.rst
index 710e9793af..4f3e8083b1 100644
--- a/Help/guide/tutorial/Adding System Introspection.rst
+++ b/Help/guide/tutorial/Adding System Introspection.rst
@@ -1,4 +1,4 @@
-Step 6: Adding System Introspection
+Step 7: Adding System Introspection
 ===================================
 
 Let us consider adding some code to our project that depends on features the
@@ -15,7 +15,7 @@ these functions using the :module:`CheckCXXSourceCompiles` module in
 Add the checks for ``log`` and ``exp`` to ``MathFunctions/CMakeLists.txt``,
 after the call to :command:`target_include_directories`:
 
-.. literalinclude:: Step7/MathFunctions/CMakeLists.txt
+.. literalinclude:: Step8/MathFunctions/CMakeLists.txt
   :caption: MathFunctions/CMakeLists.txt
   :name: MathFunctions/CMakeLists.txt-check_cxx_source_compiles
   :language: cmake
@@ -25,7 +25,7 @@ after the call to :command:`target_include_directories`:
 If available, use :command:`target_compile_definitions` to specify
 ``HAVE_LOG`` and ``HAVE_EXP`` as ``PRIVATE`` compile definitions.
 
-.. literalinclude:: Step7/MathFunctions/CMakeLists.txt
+.. literalinclude:: Step8/MathFunctions/CMakeLists.txt
   :caption: MathFunctions/CMakeLists.txt
   :name: MathFunctions/CMakeLists.txt-target_compile_definitions
   :language: cmake
@@ -37,7 +37,7 @@ compute the square root in the ``mysqrt`` function. Add the following code to
 the ``mysqrt`` function in ``MathFunctions/mysqrt.cxx`` (don't forget the
 ``#endif`` before returning the result!):
 
-.. literalinclude:: Step7/MathFunctions/mysqrt.cxx
+.. literalinclude:: Step8/MathFunctions/mysqrt.cxx
   :caption: MathFunctions/mysqrt.cxx
   :name: MathFunctions/mysqrt.cxx-ifdef
   :language: c++
@@ -46,7 +46,7 @@ the ``mysqrt`` function in ``MathFunctions/mysqrt.cxx`` (don't forget the
 
 We will also need to modify ``mysqrt.cxx`` to include ``cmath``.
 
-.. literalinclude:: Step7/MathFunctions/mysqrt.cxx
+.. literalinclude:: Step8/MathFunctions/mysqrt.cxx
   :caption: MathFunctions/mysqrt.cxx
   :name: MathFunctions/mysqrt.cxx-include-cmath
   :language: c++
diff --git a/Help/guide/tutorial/Adding a Custom Command and Generated File.rst b/Help/guide/tutorial/Adding a Custom Command and Generated File.rst
index 6dc47617f1..343979e24d 100644
--- a/Help/guide/tutorial/Adding a Custom Command and Generated File.rst
+++ b/Help/guide/tutorial/Adding a Custom Command and Generated File.rst
@@ -1,4 +1,4 @@
-Step 7: Adding a Custom Command and Generated File
+Step 8: Adding a Custom Command and Generated File
 ==================================================
 
 Suppose, for the purpose of this tutorial, we decide that we never want to use
@@ -26,7 +26,7 @@ accomplish this.
 First, at the top of ``MathFunctions/CMakeLists.txt``, the executable for
 ``MakeTable`` is added as any other executable would be added.
 
-.. literalinclude:: Step8/MathFunctions/CMakeLists.txt
+.. literalinclude:: Step9/MathFunctions/CMakeLists.txt
   :caption: MathFunctions/CMakeLists.txt
   :name: MathFunctions/CMakeLists.txt-add_executable-MakeTable
   :language: cmake
@@ -36,7 +36,7 @@ First, at the top of ``MathFunctions/CMakeLists.txt``, the executable for
 Then we add a custom command that specifies how to produce ``Table.h``
 by running MakeTable.
 
-.. literalinclude:: Step8/MathFunctions/CMakeLists.txt
+.. literalinclude:: Step9/MathFunctions/CMakeLists.txt
   :caption: MathFunctions/CMakeLists.txt
   :name: MathFunctions/CMakeLists.txt-add_custom_command-Table.h
   :language: cmake
@@ -47,7 +47,7 @@ Next we have to let CMake know that ``mysqrt.cxx`` depends on the generated
 file ``Table.h``. This is done by adding the generated ``Table.h`` to the list
 of sources for the library MathFunctions.
 
-.. literalinclude:: Step8/MathFunctions/CMakeLists.txt
+.. literalinclude:: Step9/MathFunctions/CMakeLists.txt
   :caption: MathFunctions/CMakeLists.txt
   :name: MathFunctions/CMakeLists.txt-add_library-Table.h
   :language: cmake
@@ -57,7 +57,7 @@ of sources for the library MathFunctions.
 We also have to add the current binary directory to the list of include
 directories so that ``Table.h`` can be found and included by ``mysqrt.cxx``.
 
-.. literalinclude:: Step8/MathFunctions/CMakeLists.txt
+.. literalinclude:: Step9/MathFunctions/CMakeLists.txt
   :caption: MathFunctions/CMakeLists.txt
   :name: MathFunctions/CMakeLists.txt-target_include_directories-Table.h
   :language: cmake
@@ -67,7 +67,7 @@ directories so that ``Table.h`` can be found and included by ``mysqrt.cxx``.
 Now let's use the generated table. First, modify ``mysqrt.cxx`` to include
 ``Table.h``. Next, we can rewrite the ``mysqrt`` function to use the table:
 
-.. literalinclude:: Step8/MathFunctions/mysqrt.cxx
+.. literalinclude:: Step9/MathFunctions/mysqrt.cxx
   :caption: MathFunctions/mysqrt.cxx
   :name: MathFunctions/mysqrt.cxx
   :language: c++
diff --git a/Help/guide/tutorial/Complete/CMakeLists.txt b/Help/guide/tutorial/Complete/CMakeLists.txt
index 41baf64840..3cdaaae45c 100644
--- a/Help/guide/tutorial/Complete/CMakeLists.txt
+++ b/Help/guide/tutorial/Complete/CMakeLists.txt
@@ -41,7 +41,7 @@ add_subdirectory(MathFunctions)
 add_executable(Tutorial tutorial.cxx)
 set_target_properties(Tutorial PROPERTIES DEBUG_POSTFIX ${CMAKE_DEBUG_POSTFIX})
 
-target_link_libraries(Tutorial PUBLIC MathFunctions)
+target_link_libraries(Tutorial PUBLIC MathFunctions tutorial_compiler_flags)
 
 # add the binary tree to the search path for include files
 # so that we will find TutorialConfig.h
@@ -84,6 +84,7 @@ do_test(Tutorial 25 "25 is 5")
 do_test(Tutorial -25 "-25 is (-nan|nan|0)")
 do_test(Tutorial 0.0001 "0.0001 is 0.01")
 
+# setup installer
 include(InstallRequiredSystemLibraries)
 set(CPACK_RESOURCE_FILE_LICENSE "${CMAKE_CURRENT_SOURCE_DIR}/License.txt")
 set(CPACK_PACKAGE_VERSION_MAJOR "${Tutorial_VERSION_MAJOR}")
diff --git a/Help/guide/tutorial/Complete/License.txt b/Help/guide/tutorial/Complete/License.txt
index c62d00b9ea..85760e5916 100644
--- a/Help/guide/tutorial/Complete/License.txt
+++ b/Help/guide/tutorial/Complete/License.txt
@@ -1,2 +1,2 @@
 This is the open source License.txt file introduced in
-CMake/Tutorial/Step7...
+CMake/Tutorial/Step9...
diff --git a/Help/guide/tutorial/Installing and Testing.rst b/Help/guide/tutorial/Installing and Testing.rst
index 394c9865f1..8daf5aa4be 100644
--- a/Help/guide/tutorial/Installing and Testing.rst
+++ b/Help/guide/tutorial/Installing and Testing.rst
@@ -1,4 +1,4 @@
-Step 4: Installing and Testing
+Step 5: Installing and Testing
 ==============================
 
 Now we can start adding install rules and testing support to our project.
@@ -12,7 +12,7 @@ executable and configured header.
 
 So to the end of ``MathFunctions/CMakeLists.txt`` we add:
 
-.. literalinclude:: Step5/MathFunctions/CMakeLists.txt
+.. literalinclude:: Step6/MathFunctions/CMakeLists.txt
   :caption: MathFunctions/CMakeLists.txt
   :name: MathFunctions/CMakeLists.txt-install-TARGETS
   :language: cmake
@@ -20,7 +20,7 @@ So to the end of ``MathFunctions/CMakeLists.txt`` we add:
 
 And to the end of the top-level ``CMakeLists.txt`` we add:
 
-.. literalinclude:: Step5/CMakeLists.txt
+.. literalinclude:: Step6/CMakeLists.txt
   :caption: CMakeLists.txt
   :name: CMakeLists.txt-install-TARGETS
   :language: cmake
@@ -65,7 +65,7 @@ Next let's test our application. At the end of the top-level ``CMakeLists.txt``
 file we can enable testing and then add a number of basic tests to verify that
 the application is working correctly.
 
-.. literalinclude:: Step5/CMakeLists.txt
+.. literalinclude:: Step6/CMakeLists.txt
   :caption: CMakeLists.txt
   :name: CMakeLists.txt-enable_testing
   :language: cmake
diff --git a/Help/guide/tutorial/Packaging an Installer.rst b/Help/guide/tutorial/Packaging an Installer.rst
index 5f0b27a174..f78cfadf2a 100644
--- a/Help/guide/tutorial/Packaging an Installer.rst
+++ b/Help/guide/tutorial/Packaging an Installer.rst
@@ -1,4 +1,4 @@
-Step 8: Packaging an Installer
+Step 9: Packaging an Installer
 ==============================
 
 Next suppose that we want to distribute our project to other people so that
@@ -11,7 +11,7 @@ installations and package management features. To accomplish this we will use
 CPack to create platform specific installers. Specifically we need to add a
 few lines to the bottom of our top-level ``CMakeLists.txt`` file.
 
-.. literalinclude:: Step9/CMakeLists.txt
+.. literalinclude:: Step10/CMakeLists.txt
   :caption: CMakeLists.txt
   :name: CMakeLists.txt-include-CPack
   :language: cmake
diff --git a/Help/guide/tutorial/Selecting Static or Shared Libraries.rst b/Help/guide/tutorial/Selecting Static or Shared Libraries.rst
index 2d5f70e06a..1c49c23a5e 100644
--- a/Help/guide/tutorial/Selecting Static or Shared Libraries.rst
+++ b/Help/guide/tutorial/Selecting Static or Shared Libraries.rst
@@ -1,5 +1,5 @@
-Step 9: Selecting Static or Shared Libraries
-============================================
+Step 10: Selecting Static or Shared Libraries
+=============================================
 
 In this section we will show how the :variable:`BUILD_SHARED_LIBS` variable can
 be used to control the default behavior of :command:`add_library`,
@@ -19,7 +19,7 @@ library.
 The first step is to update the starting section of the top-level
 ``CMakeLists.txt`` to look like:
 
-.. literalinclude:: Step10/CMakeLists.txt
+.. literalinclude:: Step11/CMakeLists.txt
   :caption: CMakeLists.txt
   :name: CMakeLists.txt-option-BUILD_SHARED_LIBS
   :language: cmake
@@ -33,7 +33,7 @@ explicitly require that SqrtLibrary is built statically.
 
 The end result is that ``MathFunctions/CMakeLists.txt`` should look like:
 
-.. literalinclude:: Step10/MathFunctions/CMakeLists.txt
+.. literalinclude:: Step11/MathFunctions/CMakeLists.txt
   :caption: MathFunctions/CMakeLists.txt
   :name: MathFunctions/CMakeLists.txt-add_library-STATIC
   :language: cmake
@@ -42,7 +42,7 @@ The end result is that ``MathFunctions/CMakeLists.txt`` should look like:
 Next, update ``MathFunctions/mysqrt.cxx`` to use the ``mathfunctions`` and
 ``detail`` namespaces:
 
-.. literalinclude:: Step10/MathFunctions/mysqrt.cxx
+.. literalinclude:: Step11/MathFunctions/mysqrt.cxx
   :caption: MathFunctions/mysqrt.cxx
   :name: MathFunctions/mysqrt.cxx-namespace
   :language: c++
@@ -56,7 +56,7 @@ uses ``USE_MYMATH``:
 
 Finally, update ``MathFunctions/MathFunctions.h`` to use dll export defines:
 
-.. literalinclude:: Step10/MathFunctions/MathFunctions.h
+.. literalinclude:: Step11/MathFunctions/MathFunctions.h
   :caption: MathFunctions/MathFunctions.h
   :name: MathFunctions/MathFunctions.h
   :language: c++
@@ -67,7 +67,7 @@ library that has position independent code. The solution to this is to
 explicitly set the :prop_tgt:`POSITION_INDEPENDENT_CODE` target property of
 SqrtLibrary to be ``True`` no matter the build type.
 
-.. literalinclude:: Step10/MathFunctions/CMakeLists.txt
+.. literalinclude:: Step11/MathFunctions/CMakeLists.txt
   :caption: MathFunctions/CMakeLists.txt
   :name: MathFunctions/CMakeLists.txt-POSITION_INDEPENDENT_CODE
   :language: cmake
diff --git a/Help/guide/tutorial/Step10/CMakeLists.txt b/Help/guide/tutorial/Step10/CMakeLists.txt
index 55dc409652..5c661aa229 100644
--- a/Help/guide/tutorial/Step10/CMakeLists.txt
+++ b/Help/guide/tutorial/Step10/CMakeLists.txt
@@ -1,29 +1,37 @@
-cmake_minimum_required(VERSION 3.10)
+cmake_minimum_required(VERSION 3.15)
 
 # set the project name and version
 project(Tutorial VERSION 1.0)
 
 # specify the C++ standard
-set(CMAKE_CXX_STANDARD 11)
-set(CMAKE_CXX_STANDARD_REQUIRED True)
+add_library(tutorial_compiler_flags INTERFACE)
+target_compile_features(tutorial_compiler_flags INTERFACE cxx_std_11)
 
-# control where the static and shared libraries are built so that on windows
-# we don't need to tinker with the path to run the executable
-set(CMAKE_ARCHIVE_OUTPUT_DIRECTORY "${PROJECT_BINARY_DIR}")
-set(CMAKE_LIBRARY_OUTPUT_DIRECTORY "${PROJECT_BINARY_DIR}")
-set(CMAKE_RUNTIME_OUTPUT_DIRECTORY "${PROJECT_BINARY_DIR}")
+# add compiler warning flags just when building this project via
+# the BUILD_INTERFACE genex
+set(gcc_like_cxx "$<COMPILE_LANG_AND_ID:CXX,ARMClang,AppleClang,Clang,GNU,LCC>")
+set(msvc_cxx "$<COMPILE_LANG_AND_ID:CXX,MSVC>")
+target_compile_options(tutorial_compiler_flags INTERFACE
+  "$<${gcc_like_cxx}:$<BUILD_INTERFACE:-Wall;-Wextra;-Wshadow;-Wformat=2;-Wunused>>"
+  "$<${msvc_cxx}:$<BUILD_INTERFACE:-W3>>"
+)
 
-option(BUILD_SHARED_LIBS "Build using shared libraries" ON)
+# should we use our own math functions
+option(USE_MYMATH "Use tutorial provided math implementation" ON)
 
-# configure a header file to pass the version number only
+# configure a header file to pass some of the CMake settings
+# to the source code
 configure_file(TutorialConfig.h.in TutorialConfig.h)
 
 # add the MathFunctions library
-add_subdirectory(MathFunctions)
+if(USE_MYMATH)
+  add_subdirectory(MathFunctions)
+  list(APPEND EXTRA_LIBS MathFunctions)
+endif()
 
 # add the executable
 add_executable(Tutorial tutorial.cxx)
-target_link_libraries(Tutorial PUBLIC MathFunctions)
+target_link_libraries(Tutorial PUBLIC ${EXTRA_LIBS} tutorial_compiler_flags)
 
 # add the binary tree to the search path for include files
 # so that we will find TutorialConfig.h
@@ -66,6 +74,7 @@ do_test(Tutorial 25 "25 is 5")
 do_test(Tutorial -25 "-25 is (-nan|nan|0)")
 do_test(Tutorial 0.0001 "0.0001 is 0.01")
 
+# setup installer
 include(InstallRequiredSystemLibraries)
 set(CPACK_RESOURCE_FILE_LICENSE "${CMAKE_CURRENT_SOURCE_DIR}/License.txt")
 set(CPACK_PACKAGE_VERSION_MAJOR "${Tutorial_VERSION_MAJOR}")
diff --git a/Help/guide/tutorial/Step10/License.txt b/Help/guide/tutorial/Step10/License.txt
index c62d00b9ea..85760e5916 100644
--- a/Help/guide/tutorial/Step10/License.txt
+++ b/Help/guide/tutorial/Step10/License.txt
@@ -1,2 +1,2 @@
 This is the open source License.txt file introduced in
-CMake/Tutorial/Step7...
+CMake/Tutorial/Step9...
diff --git a/Help/guide/tutorial/Step10/MathFunctions/CMakeLists.txt b/Help/guide/tutorial/Step10/MathFunctions/CMakeLists.txt
index 0bfe20c100..746f966b0a 100644
--- a/Help/guide/tutorial/Step10/MathFunctions/CMakeLists.txt
+++ b/Help/guide/tutorial/Step10/MathFunctions/CMakeLists.txt
@@ -1,55 +1,30 @@
-# add the library that runs
-add_library(MathFunctions MathFunctions.cxx)
+# first we add the executable that generates the table
+add_executable(MakeTable MakeTable.cxx)
+
+# add the command to generate the source code
+add_custom_command(
+  OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/Table.h
+  COMMAND MakeTable ${CMAKE_CURRENT_BINARY_DIR}/Table.h
+  DEPENDS MakeTable
+  )
+
+# add the main library
+add_library(MathFunctions
+            mysqrt.cxx
+            ${CMAKE_CURRENT_BINARY_DIR}/Table.h
+            )
 
 # state that anybody linking to us needs to include the current source dir
 # to find MathFunctions.h, while we don't.
+# state that we depend on our binary dir to find Table.h
 target_include_directories(MathFunctions
-                           INTERFACE ${CMAKE_CURRENT_SOURCE_DIR}
-                           )
+          INTERFACE ${CMAKE_CURRENT_SOURCE_DIR}
+          PRIVATE   ${CMAKE_CURRENT_BINARY_DIR}
+          )
 
-# should we use our own math functions
-option(USE_MYMATH "Use tutorial provided math implementation" ON)
-if(USE_MYMATH)
-
-  target_compile_definitions(MathFunctions PRIVATE "USE_MYMATH")
-
-  # first we add the executable that generates the table
-  add_executable(MakeTable MakeTable.cxx)
-
-  # add the command to generate the source code
-  add_custom_command(
-    OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/Table.h
-    COMMAND MakeTable ${CMAKE_CURRENT_BINARY_DIR}/Table.h
-    DEPENDS MakeTable
-    )
-
-  # library that just does sqrt
-  add_library(SqrtLibrary STATIC
-              mysqrt.cxx
-              ${CMAKE_CURRENT_BINARY_DIR}/Table.h
-              )
-
-  # state that we depend on our binary dir to find Table.h
-  target_include_directories(SqrtLibrary PRIVATE
-                             ${CMAKE_CURRENT_BINARY_DIR}
-                             )
-
-  # state that SqrtLibrary need PIC when the default is shared libraries
-  set_target_properties(SqrtLibrary PROPERTIES
-                        POSITION_INDEPENDENT_CODE ${BUILD_SHARED_LIBS}
-                        )
-
-  target_link_libraries(MathFunctions PRIVATE SqrtLibrary)
-endif()
-
-# define the symbol stating we are using the declspec(dllexport) when
-# building on windows
-target_compile_definitions(MathFunctions PRIVATE "EXPORTING_MYMATH")
+target_link_libraries(MathFunctions tutorial_compiler_flags)
 
 # install rules
-set(installable_libs MathFunctions)
-if(TARGET SqrtLibrary)
-  list(APPEND installable_libs SqrtLibrary)
-endif()
+set(installable_libs MathFunctions tutorial_compiler_flags)
 install(TARGETS ${installable_libs} DESTINATION lib)
 install(FILES MathFunctions.h DESTINATION include)
diff --git a/Help/guide/tutorial/Step10/MathFunctions/MathFunctions.h b/Help/guide/tutorial/Step10/MathFunctions/MathFunctions.h
index 3fb547b4a6..cd36bccffd 100644
--- a/Help/guide/tutorial/Step10/MathFunctions/MathFunctions.h
+++ b/Help/guide/tutorial/Step10/MathFunctions/MathFunctions.h
@@ -1,14 +1 @@
-
-#if defined(_WIN32)
-#  if defined(EXPORTING_MYMATH)
-#    define DECLSPEC __declspec(dllexport)
-#  else
-#    define DECLSPEC __declspec(dllimport)
-#  endif
-#else // non windows
-#  define DECLSPEC
-#endif
-
-namespace mathfunctions {
-double DECLSPEC sqrt(double x);
-}
+double mysqrt(double x);
diff --git a/Help/guide/tutorial/Step10/MathFunctions/mysqrt.cxx b/Help/guide/tutorial/Step10/MathFunctions/mysqrt.cxx
index 8153f18bed..7d80ee9648 100644
--- a/Help/guide/tutorial/Step10/MathFunctions/mysqrt.cxx
+++ b/Help/guide/tutorial/Step10/MathFunctions/mysqrt.cxx
@@ -5,8 +5,6 @@
 // include the generated table
 #include "Table.h"
 
-namespace mathfunctions {
-namespace detail {
 // a hack square root calculation using simple operations
 double mysqrt(double x)
 {
@@ -33,5 +31,3 @@ double mysqrt(double x)
 
   return result;
 }
-}
-}
diff --git a/Help/guide/tutorial/Step10/TutorialConfig.h.in b/Help/guide/tutorial/Step10/TutorialConfig.h.in
index 7e4d7fa1fa..e23f5213c7 100644
--- a/Help/guide/tutorial/Step10/TutorialConfig.h.in
+++ b/Help/guide/tutorial/Step10/TutorialConfig.h.in
@@ -1,3 +1,4 @@
 // the configured options and settings for Tutorial
 #define Tutorial_VERSION_MAJOR @Tutorial_VERSION_MAJOR@
 #define Tutorial_VERSION_MINOR @Tutorial_VERSION_MINOR@
+#cmakedefine USE_MYMATH
diff --git a/Help/guide/tutorial/Step10/tutorial.cxx b/Help/guide/tutorial/Step10/tutorial.cxx
index 37a03336ca..b3c6a4f43c 100644
--- a/Help/guide/tutorial/Step10/tutorial.cxx
+++ b/Help/guide/tutorial/Step10/tutorial.cxx
@@ -1,11 +1,15 @@
 // A simple program that computes the square root of a number
+#include <cmath>
 #include <iostream>
-#include <sstream>
 #include <string>
 
-#include "MathFunctions.h"
 #include "TutorialConfig.h"
 
+// should we include the MathFunctions header?
+#ifdef USE_MYMATH
+#  include "MathFunctions.h"
+#endif
+
 int main(int argc, char* argv[])
 {
   if (argc < 2) {
@@ -19,7 +23,12 @@ int main(int argc, char* argv[])
   // convert input to double
   const double inputValue = std::stod(argv[1]);
 
-  const double outputValue = mathfunctions::sqrt(inputValue);
+  // which square root function should we use?
+#ifdef USE_MYMATH
+  const double outputValue = mysqrt(inputValue);
+#else
+  const double outputValue = sqrt(inputValue);
+#endif
 
   std::cout << "The square root of " << inputValue << " is " << outputValue
             << std::endl;
diff --git a/Help/guide/tutorial/Step11/CMakeLists.txt b/Help/guide/tutorial/Step11/CMakeLists.txt
index 1044748d99..046bfc9a23 100644
--- a/Help/guide/tutorial/Step11/CMakeLists.txt
+++ b/Help/guide/tutorial/Step11/CMakeLists.txt
@@ -3,6 +3,7 @@ cmake_minimum_required(VERSION 3.15)
 # set the project name and version
 project(Tutorial VERSION 1.0)
 
+# specify the C++ standard
 add_library(tutorial_compiler_flags INTERFACE)
 target_compile_features(tutorial_compiler_flags INTERFACE cxx_std_11)
 
@@ -31,7 +32,7 @@ add_subdirectory(MathFunctions)
 
 # add the executable
 add_executable(Tutorial tutorial.cxx)
-target_link_libraries(Tutorial PUBLIC MathFunctions)
+target_link_libraries(Tutorial PUBLIC MathFunctions tutorial_compiler_flags)
 
 # add the binary tree to the search path for include files
 # so that we will find TutorialConfig.h
@@ -46,7 +47,7 @@ install(FILES "${PROJECT_BINARY_DIR}/TutorialConfig.h"
   )
 
 # enable testing
-enable_testing()
+include(CTest)
 
 # does the application run
 add_test(NAME Runs COMMAND Tutorial 25)
@@ -74,6 +75,7 @@ do_test(Tutorial 25 "25 is 5")
 do_test(Tutorial -25 "-25 is (-nan|nan|0)")
 do_test(Tutorial 0.0001 "0.0001 is 0.01")
 
+# setup installer
 include(InstallRequiredSystemLibraries)
 set(CPACK_RESOURCE_FILE_LICENSE "${CMAKE_CURRENT_SOURCE_DIR}/License.txt")
 set(CPACK_PACKAGE_VERSION_MAJOR "${Tutorial_VERSION_MAJOR}")
diff --git a/Help/guide/tutorial/Step11/License.txt b/Help/guide/tutorial/Step11/License.txt
index c62d00b9ea..85760e5916 100644
--- a/Help/guide/tutorial/Step11/License.txt
+++ b/Help/guide/tutorial/Step11/License.txt
@@ -1,2 +1,2 @@
 This is the open source License.txt file introduced in
-CMake/Tutorial/Step7...
+CMake/Tutorial/Step9...
diff --git a/Help/guide/tutorial/Step11/MathFunctions/CMakeLists.txt b/Help/guide/tutorial/Step11/MathFunctions/CMakeLists.txt
index 0d287ca899..0e86a129d0 100644
--- a/Help/guide/tutorial/Step11/MathFunctions/CMakeLists.txt
+++ b/Help/guide/tutorial/Step11/MathFunctions/CMakeLists.txt
@@ -47,7 +47,7 @@ endif()
 target_link_libraries(MathFunctions PUBLIC tutorial_compiler_flags)
 
 # define the symbol stating we are using the declspec(dllexport) when
-#building on windows
+# building on windows
 target_compile_definitions(MathFunctions PRIVATE "EXPORTING_MYMATH")
 
 # install rules
diff --git a/Help/guide/tutorial/Step11/tutorial.cxx b/Help/guide/tutorial/Step11/tutorial.cxx
index a4f44d54fc..37a03336ca 100644
--- a/Help/guide/tutorial/Step11/tutorial.cxx
+++ b/Help/guide/tutorial/Step11/tutorial.cxx
@@ -1,5 +1,6 @@
 // A simple program that computes the square root of a number
 #include <iostream>
+#include <sstream>
 #include <string>
 
 #include "MathFunctions.h"
diff --git a/Help/guide/tutorial/Step12/CMakeLists.txt b/Help/guide/tutorial/Step12/CMakeLists.txt
index 63f96432de..220ed4b646 100644
--- a/Help/guide/tutorial/Step12/CMakeLists.txt
+++ b/Help/guide/tutorial/Step12/CMakeLists.txt
@@ -37,7 +37,7 @@ add_subdirectory(MathFunctions)
 
 # add the executable
 add_executable(Tutorial tutorial.cxx)
-target_link_libraries(Tutorial PUBLIC MathFunctions)
+target_link_libraries(Tutorial PUBLIC MathFunctions tutorial_compiler_flags)
 
 # add the binary tree to the search path for include files
 # so that we will find TutorialConfig.h
@@ -80,6 +80,7 @@ do_test(Tutorial 25 "25 is 5")
 do_test(Tutorial -25 "-25 is (-nan|nan|0)")
 do_test(Tutorial 0.0001 "0.0001 is 0.01")
 
+# setup installer
 include(InstallRequiredSystemLibraries)
 set(CPACK_RESOURCE_FILE_LICENSE "${CMAKE_CURRENT_SOURCE_DIR}/License.txt")
 set(CPACK_PACKAGE_VERSION_MAJOR "${Tutorial_VERSION_MAJOR}")
diff --git a/Help/guide/tutorial/Step12/License.txt b/Help/guide/tutorial/Step12/License.txt
index c62d00b9ea..85760e5916 100644
--- a/Help/guide/tutorial/Step12/License.txt
+++ b/Help/guide/tutorial/Step12/License.txt
@@ -1,2 +1,2 @@
 This is the open source License.txt file introduced in
-CMake/Tutorial/Step7...
+CMake/Tutorial/Step9...
diff --git a/Help/guide/tutorial/Step5/CMakeLists.txt b/Help/guide/tutorial/Step5/CMakeLists.txt
index 82d00c8d47..4003c2198b 100644
--- a/Help/guide/tutorial/Step5/CMakeLists.txt
+++ b/Help/guide/tutorial/Step5/CMakeLists.txt
@@ -1,11 +1,20 @@
-cmake_minimum_required(VERSION 3.10)
+cmake_minimum_required(VERSION 3.15)
 
 # set the project name and version
 project(Tutorial VERSION 1.0)
 
 # specify the C++ standard
-set(CMAKE_CXX_STANDARD 11)
-set(CMAKE_CXX_STANDARD_REQUIRED True)
+add_library(tutorial_compiler_flags INTERFACE)
+target_compile_features(tutorial_compiler_flags INTERFACE cxx_std_11)
+
+# add compiler warning flags just when building this project via
+# the BUILD_INTERFACE genex
+set(gcc_like_cxx "$<COMPILE_LANG_AND_ID:CXX,ARMClang,AppleClang,Clang,GNU,LCC>")
+set(msvc_cxx "$<COMPILE_LANG_AND_ID:CXX,MSVC>")
+target_compile_options(tutorial_compiler_flags INTERFACE
+  "$<${gcc_like_cxx}:$<BUILD_INTERFACE:-Wall;-Wextra;-Wshadow;-Wformat=2;-Wunused>>"
+  "$<${msvc_cxx}:$<BUILD_INTERFACE:-W3>>"
+)
 
 # should we use our own math functions
 option(USE_MYMATH "Use tutorial provided math implementation" ON)
@@ -22,45 +31,10 @@ endif()
 
 # add the executable
 add_executable(Tutorial tutorial.cxx)
-target_link_libraries(Tutorial PUBLIC ${EXTRA_LIBS})
+target_link_libraries(Tutorial PUBLIC ${EXTRA_LIBS} tutorial_compiler_flags)
 
 # add the binary tree to the search path for include files
 # so that we will find TutorialConfig.h
 target_include_directories(Tutorial PUBLIC
                            "${PROJECT_BINARY_DIR}"
                            )
-
-# add the install targets
-install(TARGETS Tutorial DESTINATION bin)
-install(FILES "${PROJECT_BINARY_DIR}/TutorialConfig.h"
-  DESTINATION include
-  )
-
-# enable testing
-enable_testing()
-
-# does the application run
-add_test(NAME Runs COMMAND Tutorial 25)
-
-# does the usage message work?
-add_test(NAME Usage COMMAND Tutorial)
-set_tests_properties(Usage
-  PROPERTIES PASS_REGULAR_EXPRESSION "Usage:.*number"
-  )
-
-# define a function to simplify adding tests
-function(do_test target arg result)
-  add_test(NAME Comp${arg} COMMAND ${target} ${arg})
-  set_tests_properties(Comp${arg}
-    PROPERTIES PASS_REGULAR_EXPRESSION ${result}
-    )
-endfunction()
-
-# do a bunch of result based tests
-do_test(Tutorial 4 "4 is 2")
-do_test(Tutorial 9 "9 is 3")
-do_test(Tutorial 5 "5 is 2.236")
-do_test(Tutorial 7 "7 is 2.645")
-do_test(Tutorial 25 "25 is 5")
-do_test(Tutorial -25 "-25 is (-nan|nan|0)")
-do_test(Tutorial 0.0001 "0.0001 is 0.01")
diff --git a/Help/guide/tutorial/Step5/CTestConfig.cmake b/Help/guide/tutorial/Step5/CTestConfig.cmake
deleted file mode 100644
index 73efdb1f6e..0000000000
--- a/Help/guide/tutorial/Step5/CTestConfig.cmake
+++ /dev/null
@@ -1,7 +0,0 @@
-set(CTEST_PROJECT_NAME "CMakeTutorial")
-set(CTEST_NIGHTLY_START_TIME "00:00:00 EST")
-
-set(CTEST_DROP_METHOD "http")
-set(CTEST_DROP_SITE "my.cdash.org")
-set(CTEST_DROP_LOCATION "/submit.php?project=CMakeTutorial")
-set(CTEST_DROP_SITE_CDASH TRUE)
diff --git a/Help/guide/tutorial/Step5/MathFunctions/CMakeLists.txt b/Help/guide/tutorial/Step5/MathFunctions/CMakeLists.txt
index b12f27d94a..e02f21168c 100644
--- a/Help/guide/tutorial/Step5/MathFunctions/CMakeLists.txt
+++ b/Help/guide/tutorial/Step5/MathFunctions/CMakeLists.txt
@@ -6,6 +6,4 @@ target_include_directories(MathFunctions
           INTERFACE ${CMAKE_CURRENT_SOURCE_DIR}
           )
 
-# install rules
-install(TARGETS MathFunctions DESTINATION lib)
-install(FILES MathFunctions.h DESTINATION include)
+target_link_libraries(MathFunctions tutorial_compiler_flags)
diff --git a/Help/guide/tutorial/Step6/CMakeLists.txt b/Help/guide/tutorial/Step6/CMakeLists.txt
index 3ac5cd675a..da9e8521e3 100644
--- a/Help/guide/tutorial/Step6/CMakeLists.txt
+++ b/Help/guide/tutorial/Step6/CMakeLists.txt
@@ -1,11 +1,20 @@
-cmake_minimum_required(VERSION 3.10)
+cmake_minimum_required(VERSION 3.15)
 
 # set the project name and version
 project(Tutorial VERSION 1.0)
 
 # specify the C++ standard
-set(CMAKE_CXX_STANDARD 11)
-set(CMAKE_CXX_STANDARD_REQUIRED True)
+add_library(tutorial_compiler_flags INTERFACE)
+target_compile_features(tutorial_compiler_flags INTERFACE cxx_std_11)
+
+# add compiler warning flags just when building this project via
+# the BUILD_INTERFACE genex
+set(gcc_like_cxx "$<COMPILE_LANG_AND_ID:CXX,ARMClang,AppleClang,Clang,GNU,LCC>")
+set(msvc_cxx "$<COMPILE_LANG_AND_ID:CXX,MSVC>")
+target_compile_options(tutorial_compiler_flags INTERFACE
+  "$<${gcc_like_cxx}:$<BUILD_INTERFACE:-Wall;-Wextra;-Wshadow;-Wformat=2;-Wunused>>"
+  "$<${msvc_cxx}:$<BUILD_INTERFACE:-W3>>"
+)
 
 # should we use our own math functions
 option(USE_MYMATH "Use tutorial provided math implementation" ON)
@@ -22,7 +31,7 @@ endif()
 
 # add the executable
 add_executable(Tutorial tutorial.cxx)
-target_link_libraries(Tutorial PUBLIC ${EXTRA_LIBS})
+target_link_libraries(Tutorial PUBLIC ${EXTRA_LIBS} tutorial_compiler_flags)
 
 # add the binary tree to the search path for include files
 # so that we will find TutorialConfig.h
@@ -37,7 +46,7 @@ install(FILES "${PROJECT_BINARY_DIR}/TutorialConfig.h"
   )
 
 # enable testing
-include(CTest)
+enable_testing()
 
 # does the application run
 add_test(NAME Runs COMMAND Tutorial 25)
diff --git a/Help/guide/tutorial/Step6/MathFunctions/CMakeLists.txt b/Help/guide/tutorial/Step6/MathFunctions/CMakeLists.txt
index b12f27d94a..226099a966 100644
--- a/Help/guide/tutorial/Step6/MathFunctions/CMakeLists.txt
+++ b/Help/guide/tutorial/Step6/MathFunctions/CMakeLists.txt
@@ -6,6 +6,9 @@ target_include_directories(MathFunctions
           INTERFACE ${CMAKE_CURRENT_SOURCE_DIR}
           )
 
+target_link_libraries(MathFunctions tutorial_compiler_flags)
+
 # install rules
-install(TARGETS MathFunctions DESTINATION lib)
+set(installable_libs MathFunctions tutorial_compiler_flags)
+install(TARGETS ${installable_libs} DESTINATION lib)
 install(FILES MathFunctions.h DESTINATION include)
diff --git a/Help/guide/tutorial/Step7/CMakeLists.txt b/Help/guide/tutorial/Step7/CMakeLists.txt
index 3ac5cd675a..d26a90cee8 100644
--- a/Help/guide/tutorial/Step7/CMakeLists.txt
+++ b/Help/guide/tutorial/Step7/CMakeLists.txt
@@ -1,11 +1,20 @@
-cmake_minimum_required(VERSION 3.10)
+cmake_minimum_required(VERSION 3.15)
 
 # set the project name and version
 project(Tutorial VERSION 1.0)
 
 # specify the C++ standard
-set(CMAKE_CXX_STANDARD 11)
-set(CMAKE_CXX_STANDARD_REQUIRED True)
+add_library(tutorial_compiler_flags INTERFACE)
+target_compile_features(tutorial_compiler_flags INTERFACE cxx_std_11)
+
+# add compiler warning flags just when building this project via
+# the BUILD_INTERFACE genex
+set(gcc_like_cxx "$<COMPILE_LANG_AND_ID:CXX,ARMClang,AppleClang,Clang,GNU,LCC>")
+set(msvc_cxx "$<COMPILE_LANG_AND_ID:CXX,MSVC>")
+target_compile_options(tutorial_compiler_flags INTERFACE
+  "$<${gcc_like_cxx}:$<BUILD_INTERFACE:-Wall;-Wextra;-Wshadow;-Wformat=2;-Wunused>>"
+  "$<${msvc_cxx}:$<BUILD_INTERFACE:-W3>>"
+)
 
 # should we use our own math functions
 option(USE_MYMATH "Use tutorial provided math implementation" ON)
@@ -22,7 +31,7 @@ endif()
 
 # add the executable
 add_executable(Tutorial tutorial.cxx)
-target_link_libraries(Tutorial PUBLIC ${EXTRA_LIBS})
+target_link_libraries(Tutorial PUBLIC ${EXTRA_LIBS} tutorial_compiler_flags)
 
 # add the binary tree to the search path for include files
 # so that we will find TutorialConfig.h
diff --git a/Help/guide/tutorial/Step7/MathFunctions/CMakeLists.txt b/Help/guide/tutorial/Step7/MathFunctions/CMakeLists.txt
index 42e098af80..226099a966 100644
--- a/Help/guide/tutorial/Step7/MathFunctions/CMakeLists.txt
+++ b/Help/guide/tutorial/Step7/MathFunctions/CMakeLists.txt
@@ -6,29 +6,9 @@ target_include_directories(MathFunctions
           INTERFACE ${CMAKE_CURRENT_SOURCE_DIR}
           )
 
-# does this system provide the log and exp functions?
-include(CheckCXXSourceCompiles)
-check_cxx_source_compiles("
-  #include <cmath>
-  int main() {
-    std::log(1.0);
-    return 0;
-  }
-" HAVE_LOG)
-check_cxx_source_compiles("
-  #include <cmath>
-  int main() {
-    std::exp(1.0);
-    return 0;
-  }
-" HAVE_EXP)
-
-# add compile definitions
-if(HAVE_LOG AND HAVE_EXP)
-  target_compile_definitions(MathFunctions
-                             PRIVATE "HAVE_LOG" "HAVE_EXP")
-endif()
+target_link_libraries(MathFunctions tutorial_compiler_flags)
 
 # install rules
-install(TARGETS MathFunctions DESTINATION lib)
+set(installable_libs MathFunctions tutorial_compiler_flags)
+install(TARGETS ${installable_libs} DESTINATION lib)
 install(FILES MathFunctions.h DESTINATION include)
diff --git a/Help/guide/tutorial/Step7/MathFunctions/MakeTable.cxx b/Help/guide/tutorial/Step7/MathFunctions/MakeTable.cxx
deleted file mode 100644
index ee585568cb..0000000000
--- a/Help/guide/tutorial/Step7/MathFunctions/MakeTable.cxx
+++ /dev/null
@@ -1,25 +0,0 @@
-// A simple program that builds a sqrt table
-#include <cmath>
-#include <fstream>
-#include <iostream>
-
-int main(int argc, char* argv[])
-{
-  // make sure we have enough arguments
-  if (argc < 2) {
-    return 1;
-  }
-
-  std::ofstream fout(argv[1], std::ios_base::out);
-  const bool fileOpen = fout.is_open();
-  if (fileOpen) {
-    fout << "double sqrtTable[] = {" << std::endl;
-    for (int i = 0; i < 10; ++i) {
-      fout << sqrt(static_cast<double>(i)) << "," << std::endl;
-    }
-    // close the table with a zero
-    fout << "0};" << std::endl;
-    fout.close();
-  }
-  return fileOpen ? 0 : 1; // return 0 if wrote the file
-}
diff --git a/Help/guide/tutorial/Step7/MathFunctions/mysqrt.cxx b/Help/guide/tutorial/Step7/MathFunctions/mysqrt.cxx
index 7eecd26b5d..abe767d5ae 100644
--- a/Help/guide/tutorial/Step7/MathFunctions/mysqrt.cxx
+++ b/Help/guide/tutorial/Step7/MathFunctions/mysqrt.cxx
@@ -1,4 +1,3 @@
-#include <cmath>
 #include <iostream>
 
 #include "MathFunctions.h"
@@ -10,12 +9,6 @@ double mysqrt(double x)
     return 0;
   }
 
-  // if we have both log and exp then use them
-#if defined(HAVE_LOG) && defined(HAVE_EXP)
-  double result = std::exp(std::log(x) * 0.5);
-  std::cout << "Computing sqrt of " << x << " to be " << result
-            << " using log and exp" << std::endl;
-#else
   double result = x;
 
   // do ten iterations
@@ -27,6 +20,5 @@ double mysqrt(double x)
     result = result + 0.5 * delta / result;
     std::cout << "Computing sqrt of " << x << " to be " << result << std::endl;
   }
-#endif
   return result;
 }
diff --git a/Help/guide/tutorial/Step8/CMakeLists.txt b/Help/guide/tutorial/Step8/CMakeLists.txt
index 3ac5cd675a..cb87281b9e 100644
--- a/Help/guide/tutorial/Step8/CMakeLists.txt
+++ b/Help/guide/tutorial/Step8/CMakeLists.txt
@@ -1,11 +1,21 @@
-cmake_minimum_required(VERSION 3.10)
+cmake_minimum_required(VERSION 3.15)
 
 # set the project name and version
 project(Tutorial VERSION 1.0)
 
 # specify the C++ standard
-set(CMAKE_CXX_STANDARD 11)
-set(CMAKE_CXX_STANDARD_REQUIRED True)
+add_library(tutorial_compiler_flags INTERFACE)
+target_compile_features(tutorial_compiler_flags INTERFACE cxx_std_11)
+
+# add compiler warning flags just when building this project via
+# the BUILD_INTERFACE genex
+set(gcc_like_cxx "$<COMPILE_LANG_AND_ID:CXX,ARMClang,AppleClang,Clang,GNU,LCC>")
+set(msvc_cxx "$<COMPILE_LANG_AND_ID:CXX,MSVC>")
+target_compile_options(tutorial_compiler_flags INTERFACE
+  "$<${gcc_like_cxx}:$<BUILD_INTERFACE:-Wall;-Wextra;-Wshadow;-Wformat=2;-Wunused>>"
+  "$<${msvc_cxx}:$<BUILD_INTERFACE:-W3>>"
+)
+
 
 # should we use our own math functions
 option(USE_MYMATH "Use tutorial provided math implementation" ON)
@@ -22,7 +32,7 @@ endif()
 
 # add the executable
 add_executable(Tutorial tutorial.cxx)
-target_link_libraries(Tutorial PUBLIC ${EXTRA_LIBS})
+target_link_libraries(Tutorial PUBLIC ${EXTRA_LIBS} tutorial_compiler_flags)
 
 # add the binary tree to the search path for include files
 # so that we will find TutorialConfig.h
diff --git a/Help/guide/tutorial/Step8/License.txt b/Help/guide/tutorial/Step8/License.txt
deleted file mode 100644
index c62d00b9ea..0000000000
--- a/Help/guide/tutorial/Step8/License.txt
+++ /dev/null
@@ -1,2 +0,0 @@
-This is the open source License.txt file introduced in
-CMake/Tutorial/Step7...
diff --git a/Help/guide/tutorial/Step8/MathFunctions/CMakeLists.txt b/Help/guide/tutorial/Step8/MathFunctions/CMakeLists.txt
index 9ede4b327c..a832003919 100644
--- a/Help/guide/tutorial/Step8/MathFunctions/CMakeLists.txt
+++ b/Help/guide/tutorial/Step8/MathFunctions/CMakeLists.txt
@@ -1,29 +1,37 @@
-# first we add the executable that generates the table
-add_executable(MakeTable MakeTable.cxx)
-
-# add the command to generate the source code
-add_custom_command(
-  OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/Table.h
-  COMMAND MakeTable ${CMAKE_CURRENT_BINARY_DIR}/Table.h
-  DEPENDS MakeTable
-  )
-
-# add the main library
-add_library(MathFunctions
-            mysqrt.cxx
-            ${CMAKE_CURRENT_BINARY_DIR}/Table.h
-            )
+add_library(MathFunctions mysqrt.cxx)
 
 # state that anybody linking to us needs to include the current source dir
 # to find MathFunctions.h, while we don't.
-# state that we depend on Tutorial_BINARY_DIR but consumers don't, as the
-# TutorialConfig.h include is an implementation detail
-# state that we depend on our binary dir to find Table.h
 target_include_directories(MathFunctions
           INTERFACE ${CMAKE_CURRENT_SOURCE_DIR}
-          PRIVATE ${CMAKE_CURRENT_BINARY_DIR}
           )
 
+target_link_libraries(MathFunctions tutorial_compiler_flags)
+
+# does this system provide the log and exp functions?
+include(CheckCXXSourceCompiles)
+check_cxx_source_compiles("
+  #include <cmath>
+  int main() {
+    std::log(1.0);
+    return 0;
+  }
+" HAVE_LOG)
+check_cxx_source_compiles("
+  #include <cmath>
+  int main() {
+    std::exp(1.0);
+    return 0;
+  }
+" HAVE_EXP)
+
+# add compile definitions
+if(HAVE_LOG AND HAVE_EXP)
+  target_compile_definitions(MathFunctions
+                             PRIVATE "HAVE_LOG" "HAVE_EXP")
+endif()
+
 # install rules
-install(TARGETS MathFunctions DESTINATION lib)
+set(installable_libs MathFunctions tutorial_compiler_flags)
+install(TARGETS ${installable_libs} DESTINATION lib)
 install(FILES MathFunctions.h DESTINATION include)
diff --git a/Help/guide/tutorial/Step8/MathFunctions/mysqrt.cxx b/Help/guide/tutorial/Step8/MathFunctions/mysqrt.cxx
index 7d80ee9648..7eecd26b5d 100644
--- a/Help/guide/tutorial/Step8/MathFunctions/mysqrt.cxx
+++ b/Help/guide/tutorial/Step8/MathFunctions/mysqrt.cxx
@@ -1,10 +1,8 @@
+#include <cmath>
 #include <iostream>
 
 #include "MathFunctions.h"
 
-// include the generated table
-#include "Table.h"
-
 // a hack square root calculation using simple operations
 double mysqrt(double x)
 {
@@ -12,12 +10,13 @@ double mysqrt(double x)
     return 0;
   }
 
-  // use the table to help find an initial value
+  // if we have both log and exp then use them
+#if defined(HAVE_LOG) && defined(HAVE_EXP)
+  double result = std::exp(std::log(x) * 0.5);
+  std::cout << "Computing sqrt of " << x << " to be " << result
+            << " using log and exp" << std::endl;
+#else
   double result = x;
-  if (x >= 1 && x < 10) {
-    std::cout << "Use the table to help find an initial value " << std::endl;
-    result = sqrtTable[static_cast<int>(x)];
-  }
 
   // do ten iterations
   for (int i = 0; i < 10; ++i) {
@@ -28,6 +27,6 @@ double mysqrt(double x)
     result = result + 0.5 * delta / result;
     std::cout << "Computing sqrt of " << x << " to be " << result << std::endl;
   }
-
+#endif
   return result;
 }
diff --git a/Help/guide/tutorial/Step9/CMakeLists.txt b/Help/guide/tutorial/Step9/CMakeLists.txt
index b13a662837..d26a90cee8 100644
--- a/Help/guide/tutorial/Step9/CMakeLists.txt
+++ b/Help/guide/tutorial/Step9/CMakeLists.txt
@@ -1,11 +1,20 @@
-cmake_minimum_required(VERSION 3.10)
+cmake_minimum_required(VERSION 3.15)
 
 # set the project name and version
 project(Tutorial VERSION 1.0)
 
 # specify the C++ standard
-set(CMAKE_CXX_STANDARD 11)
-set(CMAKE_CXX_STANDARD_REQUIRED True)
+add_library(tutorial_compiler_flags INTERFACE)
+target_compile_features(tutorial_compiler_flags INTERFACE cxx_std_11)
+
+# add compiler warning flags just when building this project via
+# the BUILD_INTERFACE genex
+set(gcc_like_cxx "$<COMPILE_LANG_AND_ID:CXX,ARMClang,AppleClang,Clang,GNU,LCC>")
+set(msvc_cxx "$<COMPILE_LANG_AND_ID:CXX,MSVC>")
+target_compile_options(tutorial_compiler_flags INTERFACE
+  "$<${gcc_like_cxx}:$<BUILD_INTERFACE:-Wall;-Wextra;-Wshadow;-Wformat=2;-Wunused>>"
+  "$<${msvc_cxx}:$<BUILD_INTERFACE:-W3>>"
+)
 
 # should we use our own math functions
 option(USE_MYMATH "Use tutorial provided math implementation" ON)
@@ -22,7 +31,7 @@ endif()
 
 # add the executable
 add_executable(Tutorial tutorial.cxx)
-target_link_libraries(Tutorial PUBLIC ${EXTRA_LIBS})
+target_link_libraries(Tutorial PUBLIC ${EXTRA_LIBS} tutorial_compiler_flags)
 
 # add the binary tree to the search path for include files
 # so that we will find TutorialConfig.h
@@ -64,11 +73,3 @@ do_test(Tutorial 7 "7 is 2.645")
 do_test(Tutorial 25 "25 is 5")
 do_test(Tutorial -25 "-25 is (-nan|nan|0)")
 do_test(Tutorial 0.0001 "0.0001 is 0.01")
-
-# setup installer
-include(InstallRequiredSystemLibraries)
-set(CPACK_RESOURCE_FILE_LICENSE "${CMAKE_CURRENT_SOURCE_DIR}/License.txt")
-set(CPACK_PACKAGE_VERSION_MAJOR "${Tutorial_VERSION_MAJOR}")
-set(CPACK_PACKAGE_VERSION_MINOR "${Tutorial_VERSION_MINOR}")
-set(CPACK_SOURCE_GENERATOR "TGZ")
-include(CPack)
diff --git a/Help/guide/tutorial/Step9/License.txt b/Help/guide/tutorial/Step9/License.txt
index c62d00b9ea..85760e5916 100644
--- a/Help/guide/tutorial/Step9/License.txt
+++ b/Help/guide/tutorial/Step9/License.txt
@@ -1,2 +1,2 @@
 This is the open source License.txt file introduced in
-CMake/Tutorial/Step7...
+CMake/Tutorial/Step9...
diff --git a/Help/guide/tutorial/Step9/MathFunctions/CMakeLists.txt b/Help/guide/tutorial/Step9/MathFunctions/CMakeLists.txt
index 50f0701fe3..8a08157bc5 100644
--- a/Help/guide/tutorial/Step9/MathFunctions/CMakeLists.txt
+++ b/Help/guide/tutorial/Step9/MathFunctions/CMakeLists.txt
@@ -16,12 +16,17 @@ add_library(MathFunctions
 
 # state that anybody linking to us needs to include the current source dir
 # to find MathFunctions.h, while we don't.
+# state that we depend on Tutorial_BINARY_DIR but consumers don't, as the
+# TutorialConfig.h include is an implementation detail
 # state that we depend on our binary dir to find Table.h
 target_include_directories(MathFunctions
           INTERFACE ${CMAKE_CURRENT_SOURCE_DIR}
           PRIVATE   ${CMAKE_CURRENT_BINARY_DIR}
           )
 
+target_link_libraries(MathFunctions tutorial_compiler_flags)
+
 # install rules
-install(TARGETS MathFunctions DESTINATION lib)
+set(installable_libs MathFunctions tutorial_compiler_flags)
+install(TARGETS ${installable_libs} DESTINATION lib)
 install(FILES MathFunctions.h DESTINATION include)
diff --git a/Help/guide/tutorial/Step9/MathFunctions/MathFunctions.cxx b/Help/guide/tutorial/Step9/MathFunctions/MathFunctions.cxx
deleted file mode 100644
index 0145300629..0000000000
--- a/Help/guide/tutorial/Step9/MathFunctions/MathFunctions.cxx
+++ /dev/null
@@ -1,19 +0,0 @@
-
-#include "MathFunctions.h"
-
-#include <cmath>
-
-#ifdef USE_MYMATH
-#  include "mysqrt.h"
-#endif
-
-namespace mathfunctions {
-double sqrt(double x)
-{
-#ifdef USE_MYMATH
-  return detail::mysqrt(x);
-#else
-  return std::sqrt(x);
-#endif
-}
-}
diff --git a/Help/guide/tutorial/Step9/MathFunctions/mysqrt.h b/Help/guide/tutorial/Step9/MathFunctions/mysqrt.h
deleted file mode 100644
index e1c42ef0c2..0000000000
--- a/Help/guide/tutorial/Step9/MathFunctions/mysqrt.h
+++ /dev/null
@@ -1,6 +0,0 @@
-
-namespace mathfunctions {
-namespace detail {
-double mysqrt(double x);
-}
-}
diff --git a/Help/guide/tutorial/index.rst b/Help/guide/tutorial/index.rst
index 65d4829f8d..1ab00093d4 100644
--- a/Help/guide/tutorial/index.rst
+++ b/Help/guide/tutorial/index.rst
@@ -24,13 +24,13 @@ provides the complete solution for the previous step.
   A Basic Starting Point
   Adding a Library
   Adding Usage Requirements for a Library
+  Adding Generator Expressions
   Installing and Testing
   Adding Support for a Testing Dashboard
   Adding System Introspection
   Adding a Custom Command and Generated File
   Packaging an Installer
   Selecting Static or Shared Libraries
-  Adding Generator Expressions
   Adding Export Configuration
   Packaging Debug and Release