Tests: Improve CheckSourceTree test

Re-implement the test using simpler approach.  Enable it only when doing
an out-of-source build with a `.git` source.  Run it last, serially.
Re-use the `git` tool found for version computation.  Print the output
from `git status` without modification.  Rely on `.gitignore` instead
of filtering out paths ourselves.

2 files changed, 0 insertions, 380 deletions

diff --git a/Tests/CMakeTests/CMakeLists.txt b/Tests/CMakeTests/CMakeLists.txt
index 9e0b89101d..bd2dd7e940 100644
--- a/Tests/CMakeTests/CMakeLists.txt
+++ b/Tests/CMakeTests/CMakeLists.txt
@@ -59,18 +59,3 @@ if(GIT_EXECUTABLE)
     )
   AddCMakeTest(PolicyCheck "${PolicyCheck_PreArgs}")
 endif()
-
-# Run CheckSourceTree as the very last test in the CMake/CTest/CPack test
-# suite. It detects if any changes have been made to the CMake source tree
-# by any previous configure, build or test steps.
-#
-if(GIT_EXECUTABLE)
-  string(REPLACE "\\" "/" ENV_HOME "$ENV{HOME}")
-  set(CheckSourceTree_PreArgs
-    "-DCMake_BINARY_DIR:PATH=${CMake_BINARY_DIR}"
-    "-DCMake_SOURCE_DIR:PATH=${CMake_SOURCE_DIR}"
-    "-DGIT_EXECUTABLE:STRING=${GIT_EXECUTABLE}"
-    "-DHOME:STRING=${ENV_HOME}"
-    )
-  AddCMakeTest(CheckSourceTree "${CheckSourceTree_PreArgs}")
-endif()
diff --git a/Tests/CMakeTests/CheckSourceTreeTest.cmake.in b/Tests/CMakeTests/CheckSourceTreeTest.cmake.in
deleted file mode 100644
index 4f2aaea9cf..0000000000
--- a/Tests/CMakeTests/CheckSourceTreeTest.cmake.in
+++ /dev/null
@@ -1,365 +0,0 @@
-# Check the CMake source tree and report anything suspicious...
-#
-message("=============================================================================")
-message("CTEST_FULL_OUTPUT (Avoid ctest truncation of output)")
-message("")
-message("CMake_BINARY_DIR='${CMake_BINARY_DIR}'")
-message("CMake_SOURCE_DIR='${CMake_SOURCE_DIR}'")
-message("GIT_EXECUTABLE='${GIT_EXECUTABLE}'")
-message("HOME='${HOME}'")
-message("ENV{DASHBOARD_TEST_FROM_CTEST}='$ENV{DASHBOARD_TEST_FROM_CTEST}'")
-message("")
-string(REPLACE "\\" "\\\\" HOME "${HOME}")
-
-
-# Is the build directory the same as or underneath the source directory?
-# (i.e. - is it an "in source" build?)
-#
-set(in_source_build 0)
-set(build_under_source 0)
-
-string(FIND "${CMake_BINARY_DIR}" "${CMake_SOURCE_DIR}/" pos)
-if(pos EQUAL 0)
-  message("build dir is *inside* source dir")
-  set(build_under_source 1)
-elseif(CMake_SOURCE_DIR STREQUAL "${CMake_BINARY_DIR}")
-  message("build dir *is* source dir")
-  set(in_source_build 1)
-else()
-  string(LENGTH "${CMake_SOURCE_DIR}" src_len)
-  string(LENGTH "${CMake_BINARY_DIR}" bin_len)
-
-  if(bin_len GREATER src_len)
-    math(EXPR substr_len "${src_len}+1")
-    string(SUBSTRING "${CMake_BINARY_DIR}" 0 ${substr_len} bin_dir)
-    if(bin_dir STREQUAL "${CMake_SOURCE_DIR}/")
-      message("build dir is under source dir")
-      set(in_source_build 1)
-    endif()
-  endif()
-endif()
-
-message("src_len='${src_len}'")
-message("bin_len='${bin_len}'")
-message("substr_len='${substr_len}'")
-message("bin_dir='${bin_dir}'")
-message("in_source_build='${in_source_build}'")
-message("build_under_source='${build_under_source}'")
-message("")
-
-if(build_under_source)
-  message(STATUS "Skipping rest of test because build tree is under source tree")
-  return()
-endif()
-
-# If this does not appear to be a git checkout, just pass the test here
-# and now. (Do not let the test fail if it is run in a tree *exported* from a
-# repository or unpacked from a .zip file source installer...)
-#
-set(is_git_checkout 0)
-if(EXISTS "${CMake_SOURCE_DIR}/.git")
-  set(is_git_checkout 1)
-endif()
-
-message("is_git_checkout='${is_git_checkout}'")
-message("")
-
-if(NOT is_git_checkout)
-  message("source tree is not a git checkout... test passes by early return...")
-  return()
-endif()
-
-# This test looks for the following types of changes in the source tree:
-#
-set(additions 0)
-set(conflicts 0)
-set(modifications 0)
-set(nonadditions 0)
-
-# ov == output variable... conditionally filled in by either git below:
-#
-set(cmd "")
-set(ov "")
-set(ev "")
-set(rv "")
-
-# If no GIT_EXECUTABLE, see if we can figure out which git was used
-# for the ctest_update step on this dashboard...
-#
-if(is_git_checkout AND NOT GIT_EXECUTABLE)
-  set(ctest_ini_file "")
-  set(exe "")
-
-  # Use the old name:
-  if(EXISTS "${CMake_BINARY_DIR}/DartConfiguration.tcl")
-    set(ctest_ini_file "${CMake_BINARY_DIR}/DartConfiguration.tcl")
-  endif()
-
-  # But if it exists, prefer the new name:
-  if(EXISTS "${CMake_BINARY_DIR}/CTestConfiguration.ini")
-    set(ctest_ini_file "${CMake_BINARY_DIR}/CTestConfiguration.ini")
-  endif()
-
-  # If there is a ctest ini file, read the update command or git command
-  # from it:
-  #
-  if(ctest_ini_file)
-    file(STRINGS "${ctest_ini_file}" line REGEX "^GITCommand: (.*)$")
-    string(REGEX REPLACE "^GITCommand: (.*)$" "\\1" line "${line}")
-    if("${line}" MATCHES "^\"")
-      string(REGEX REPLACE "^\"([^\"]+)\" *.*$" "\\1" line "${line}")
-    else()
-      string(REGEX REPLACE "^([^ ]+) *.*$" "\\1" line "${line}")
-    endif()
-    set(exe "${line}")
-    if("${exe}" STREQUAL "GITCOMMAND-NOTFOUND")
-      set(exe "")
-    endif()
-    if(exe)
-      message("info: GIT_EXECUTABLE set by 'GITCommand:' from '${ctest_ini_file}'")
-    endif()
-
-    if(NOT exe)
-      file(STRINGS "${ctest_ini_file}" line REGEX "^UpdateCommand: (.*)$")
-      string(REGEX REPLACE "^UpdateCommand: (.*)$" "\\1" line "${line}")
-      if("${line}" MATCHES "^\"")
-        string(REGEX REPLACE "^\"([^\"]+)\" *.*$" "\\1" line "${line}")
-      else()
-        string(REGEX REPLACE "^([^ ]+) *.*$" "\\1" line "${line}")
-      endif()
-      set(exe "${line}")
-      if("${exe}" STREQUAL "GITCOMMAND-NOTFOUND")
-        set(exe "")
-      endif()
-      if(exe)
-        message("info: GIT_EXECUTABLE set by 'UpdateCommand:' from '${ctest_ini_file}'")
-      endif()
-    endif()
-  else()
-    message("info: no DartConfiguration.tcl or CTestConfiguration.ini file...")
-  endif()
-
-  # If we have still not grokked the exe, look in the Update.xml file to see
-  # if we can parse it from there...
-  #
-  if(NOT exe)
-    file(GLOB_RECURSE update_xml_file "${CMake_BINARY_DIR}/Testing/Update.xml")
-    if(update_xml_file)
-      file(STRINGS "${update_xml_file}" line
-        REGEX "^.*<UpdateCommand>(.*)</UpdateCommand>$" LIMIT_COUNT 1)
-      string(REPLACE "&quot\;" "\"" line "${line}")
-      string(REGEX REPLACE "^.*<UpdateCommand>(.*)</UpdateCommand>$" "\\1" line "${line}")
-      if("${line}" MATCHES "^\"")
-        string(REGEX REPLACE "^\"([^\"]+)\" *.*$" "\\1" line "${line}")
-      else()
-        string(REGEX REPLACE "^([^ ]+) *.*$" "\\1" line "${line}")
-      endif()
-      if(line)
-        set(exe "${line}")
-      endif()
-      if(exe)
-        message("info: GIT_EXECUTABLE set by '<UpdateCommand>' from '${update_xml_file}'")
-      endif()
-    else()
-      message("info: no Update.xml file...")
-    endif()
-  endif()
-
-  if(exe)
-    set(GIT_EXECUTABLE "${exe}")
-    message("GIT_EXECUTABLE='${GIT_EXECUTABLE}'")
-    message("")
-
-    if(NOT EXISTS "${GIT_EXECUTABLE}")
-      message(FATAL_ERROR "GIT_EXECUTABLE does not exist...")
-    endif()
-  else()
-    message(FATAL_ERROR "could not determine GIT_EXECUTABLE...")
-  endif()
-endif()
-
-
-if(is_git_checkout AND GIT_EXECUTABLE)
-  # Check with "git status" if there are any local modifications to the
-  # CMake source tree:
-  #
-  message("=============================================================================")
-  message("This is a git checkout, using git to verify source tree....")
-  message("")
-
-  execute_process(COMMAND ${GIT_EXECUTABLE} --version
-    WORKING_DIRECTORY ${CMake_SOURCE_DIR}
-    OUTPUT_VARIABLE version_output
-    OUTPUT_STRIP_TRAILING_WHITESPACE)
-  message("=== output of 'git --version' ===")
-  message("${version_output}")
-  message("=== end output ===")
-  message("")
-
-  execute_process(COMMAND ${GIT_EXECUTABLE} branch -a
-    WORKING_DIRECTORY ${CMake_SOURCE_DIR}
-    OUTPUT_VARIABLE git_branch_output
-    OUTPUT_STRIP_TRAILING_WHITESPACE)
-  message("=== output of 'git branch -a' ===")
-  message("${git_branch_output}")
-  message("=== end output ===")
-  message("")
-
-  execute_process(COMMAND ${GIT_EXECUTABLE} log -1
-    WORKING_DIRECTORY ${CMake_SOURCE_DIR}
-    OUTPUT_VARIABLE git_log_output
-    OUTPUT_STRIP_TRAILING_WHITESPACE)
-  message("=== output of 'git log -1' ===")
-  message("${git_log_output}")
-  message("=== end output ===")
-  message("")
-
-  message("Copy/paste this command to reproduce:")
-  message("cd \"${CMake_SOURCE_DIR}\" && \"${GIT_EXECUTABLE}\" status")
-  message("")
-
-  set(cmd ${GIT_EXECUTABLE} status)
-endif()
-
-
-if(cmd)
-  # Use the HOME value passed in to the script for calling git so it can
-  # find its user/global config settings...
-  #
-  set(original_ENV_HOME "$ENV{HOME}")
-  set(ENV{HOME} "${HOME}")
-
-  execute_process(COMMAND ${cmd}
-    WORKING_DIRECTORY ${CMake_SOURCE_DIR}
-    OUTPUT_VARIABLE ov
-    ERROR_VARIABLE ev
-    RESULT_VARIABLE rv)
-
-  set(ENV{HOME} "${original_ENV_HOME}")
-
-  message("Results of running ${cmd}")
-  message("rv='${rv}'")
-  message("ov='${ov}'")
-  message("ev='${ev}'")
-  message("")
-
-  if(NOT rv STREQUAL 0)
-    if(is_git_checkout AND (rv STREQUAL "1"))
-      # Many builds of git return "1" from a "nothing is changed" git status call...
-      # Do not fail with an error for rv==1 with git...
-    else()
-      message(FATAL_ERROR "error: ${cmd} attempt failed... (see output above)")
-    endif()
-  endif()
-else()
-  message(FATAL_ERROR "error: no COMMAND to run to analyze source tree...")
-endif()
-
-
-# Analyze output:
-#
-if(NOT ov STREQUAL "")
-  string(REPLACE ";" "\\\\;" lines "${ov}")
-  string(REPLACE "\n" "E;" lines "${lines}")
-
-  foreach(line ${lines})
-    message("'${line}'")
-
-    # But do not consider files that exist just because some user poked around
-    # the file system with Windows Explorer or with the Finder from a Mac...
-    # ('Thumbs.db' and '.DS_Store' files...)
-    #
-    set(consider 1)
-    set(ignore_files_regex "^(. |.*(/|\\\\))(\\.DS_Store|Thumbs.db)E$")
-    if(line MATCHES "${ignore_files_regex}")
-      message("   line matches '${ignore_files_regex}' -- not considered")
-      set(consider 0)
-    endif()
-
-    if(consider)
-      if(is_git_checkout)
-        if(line MATCHES "^#?[ \t]*modified:")
-          message("   locally modified file detected...")
-          set(modifications 1)
-        endif()
-
-        if(line MATCHES "^(# )?Untracked")
-          message("   locally non-added file/directory detected...")
-          set(nonadditions 1)
-        endif()
-      endif()
-    endif()
-  endforeach()
-endif()
-
-
-message("=============================================================================")
-message("additions='${additions}'")
-message("conflicts='${conflicts}'")
-message("modifications='${modifications}'")
-message("nonadditions='${nonadditions}'")
-message("")
-
-
-# Decide if the test passes or fails:
-#
-message("=============================================================================")
-
-if("$ENV{DASHBOARD_TEST_FROM_CTEST}" STREQUAL "")
-
-  # developers are allowed to have local additions and modifications...
-  message("interactive test run")
-  message("")
-
-else()
-
-  message("dashboard test run")
-  message("")
-
-  # but dashboard machines are not allowed to have local additions or modifications...
-  if(additions)
-    message(FATAL_ERROR "test fails: local source tree additions")
-  endif()
-
-  if(modifications)
-    message(FATAL_ERROR "test fails: local source tree modifications")
-  endif()
-
-  #
-  # It's a dashboard run if ctest was run with '-D ExperimentalTest' or some
-  # other -D arg on its command line or if ctest is running a -S script to run
-  # a dashboard... Running ctest like that sets the DASHBOARD_TEST_FROM_CTEST
-  # env var.
-  #
-
-endif()
-
-
-# ...and nobody is allowed to have local non-additions or conflicts...
-# Not even developers.
-#
-if(nonadditions)
-  if(in_source_build)
-    message("
-warning: test results confounded because this is an 'in-source' build - cannot
-distinguish between non-added files that are in-source build products and
-non-added source files that somebody forgot to 'git add'... - this is only ok
-if this is intentionally an in-source dashboard build... Developers should
-use out-of-source builds to verify a clean source tree with this test...
-
-Allowing test to pass despite the warning message...
-")
-  else()
-    message(FATAL_ERROR "test fails: local source tree non-additions: use git add before committing, or remove the files from the source tree")
-  endif()
-endif()
-
-if(conflicts)
-  message(FATAL_ERROR "test fails: local source tree conflicts: resolve before committing")
-endif()
-
-
-# Still here? Good then...
-#
-message("test passes")
-message("")