Merge branch 'upstream-bzip2' into update-bzip2

# By bzip2 upstream
* upstream-bzip2:
  bzip2 2007-12-10 (a1d78c55)

18 files changed, 8350 insertions, 0 deletions

diff --git a/Utilities/cmbzip2/.gitattributes b/Utilities/cmbzip2/.gitattributes
new file mode 100644
index 0000000000..562b12e16e
--- /dev/null
+++ b/Utilities/cmbzip2/.gitattributes
@@ -0,0 +1 @@
+* -whitespace
diff --git a/Utilities/cmbzip2/LICENSE b/Utilities/cmbzip2/LICENSE
new file mode 100644
index 0000000000..f420cffb67
--- /dev/null
+++ b/Utilities/cmbzip2/LICENSE
@@ -0,0 +1,42 @@
+
+--------------------------------------------------------------------------
+
+This program, "bzip2", the associated library "libbzip2", and all
+documentation, are copyright (C) 1996-2007 Julian R Seward.  All
+rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions
+are met:
+
+1. Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+
+2. The origin of this software must not be misrepresented; you must 
+   not claim that you wrote the original software.  If you use this 
+   software in a product, an acknowledgment in the product 
+   documentation would be appreciated but is not required.
+
+3. Altered source versions must be plainly marked as such, and must
+   not be misrepresented as being the original software.
+
+4. The name of the author may not be used to endorse or promote 
+   products derived from this software without specific prior written 
+   permission.
+
+THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
+OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+Julian Seward, jseward@bzip.org
+bzip2/libbzip2 version 1.0.5 of 10 December 2007
+
+--------------------------------------------------------------------------
diff --git a/Utilities/cmbzip2/README b/Utilities/cmbzip2/README
new file mode 100644
index 0000000000..e17a84e049
--- /dev/null
+++ b/Utilities/cmbzip2/README
@@ -0,0 +1,210 @@
+
+This is the README for bzip2/libzip2.
+This version is fully compatible with the previous public releases.
+
+------------------------------------------------------------------
+This file is part of bzip2/libbzip2, a program and library for
+lossless, block-sorting data compression.
+
+bzip2/libbzip2 version 1.0.5 of 10 December 2007
+Copyright (C) 1996-2007 Julian Seward <jseward@bzip.org>
+
+Please read the WARNING, DISCLAIMER and PATENTS sections in this file.
+
+This program is released under the terms of the license contained
+in the file LICENSE.
+------------------------------------------------------------------
+
+Complete documentation is available in Postscript form (manual.ps),
+PDF (manual.pdf) or html (manual.html).  A plain-text version of the
+manual page is available as bzip2.txt.
+
+
+HOW TO BUILD -- UNIX
+
+Type 'make'.  This builds the library libbz2.a and then the programs
+bzip2 and bzip2recover.  Six self-tests are run.  If the self-tests
+complete ok, carry on to installation:
+
+To install in /usr/local/bin, /usr/local/lib, /usr/local/man and
+/usr/local/include, type
+
+   make install
+
+To install somewhere else, eg, /xxx/yyy/{bin,lib,man,include}, type
+
+   make install PREFIX=/xxx/yyy
+
+If you are (justifiably) paranoid and want to see what 'make install'
+is going to do, you can first do
+
+   make -n install                      or
+   make -n install PREFIX=/xxx/yyy      respectively.
+
+The -n instructs make to show the commands it would execute, but not
+actually execute them.
+
+
+HOW TO BUILD -- UNIX, shared library libbz2.so.
+
+Do 'make -f Makefile-libbz2_so'.  This Makefile seems to work for
+Linux-ELF (RedHat 7.2 on an x86 box), with gcc.  I make no claims
+that it works for any other platform, though I suspect it probably
+will work for most platforms employing both ELF and gcc.
+
+bzip2-shared, a client of the shared library, is also built, but not
+self-tested.  So I suggest you also build using the normal Makefile,
+since that conducts a self-test.  A second reason to prefer the
+version statically linked to the library is that, on x86 platforms,
+building shared objects makes a valuable register (%ebx) unavailable
+to gcc, resulting in a slowdown of 10%-20%, at least for bzip2.
+
+Important note for people upgrading .so's from 0.9.0/0.9.5 to version
+1.0.X.  All the functions in the library have been renamed, from (eg)
+bzCompress to BZ2_bzCompress, to avoid namespace pollution.
+Unfortunately this means that the libbz2.so created by
+Makefile-libbz2_so will not work with any program which used an older
+version of the library.  I do encourage library clients to make the
+effort to upgrade to use version 1.0, since it is both faster and more
+robust than previous versions.
+
+
+HOW TO BUILD -- Windows 95, NT, DOS, Mac, etc.
+
+It's difficult for me to support compilation on all these platforms.
+My approach is to collect binaries for these platforms, and put them
+on the master web site (http://www.bzip.org).  Look there.  However
+(FWIW), bzip2-1.0.X is very standard ANSI C and should compile
+unmodified with MS Visual C.  If you have difficulties building, you
+might want to read README.COMPILATION.PROBLEMS.
+
+At least using MS Visual C++ 6, you can build from the unmodified
+sources by issuing, in a command shell: 
+
+   nmake -f makefile.msc
+
+(you may need to first run the MSVC-provided script VCVARS32.BAT
+ so as to set up paths to the MSVC tools correctly).
+
+
+VALIDATION
+
+Correct operation, in the sense that a compressed file can always be
+decompressed to reproduce the original, is obviously of paramount
+importance.  To validate bzip2, I used a modified version of Mark
+Nelson's churn program.  Churn is an automated test driver which
+recursively traverses a directory structure, using bzip2 to compress
+and then decompress each file it encounters, and checking that the
+decompressed data is the same as the original.
+
+
+
+Please read and be aware of the following:
+
+WARNING:
+
+   This program and library (attempts to) compress data by 
+   performing several non-trivial transformations on it.  
+   Unless you are 100% familiar with *all* the algorithms 
+   contained herein, and with the consequences of modifying them, 
+   you should NOT meddle with the compression or decompression 
+   machinery.  Incorrect changes can and very likely *will* 
+   lead to disastrous loss of data.
+
+
+DISCLAIMER:
+
+   I TAKE NO RESPONSIBILITY FOR ANY LOSS OF DATA ARISING FROM THE
+   USE OF THIS PROGRAM/LIBRARY, HOWSOEVER CAUSED.
+
+   Every compression of a file implies an assumption that the
+   compressed file can be decompressed to reproduce the original.
+   Great efforts in design, coding and testing have been made to
+   ensure that this program works correctly.  However, the complexity
+   of the algorithms, and, in particular, the presence of various
+   special cases in the code which occur with very low but non-zero
+   probability make it impossible to rule out the possibility of bugs
+   remaining in the program.  DO NOT COMPRESS ANY DATA WITH THIS
+   PROGRAM UNLESS YOU ARE PREPARED TO ACCEPT THE POSSIBILITY, HOWEVER
+   SMALL, THAT THE DATA WILL NOT BE RECOVERABLE.
+
+   That is not to say this program is inherently unreliable.  
+   Indeed, I very much hope the opposite is true.  bzip2/libbzip2 
+   has been carefully constructed and extensively tested.
+
+
+PATENTS:
+
+   To the best of my knowledge, bzip2/libbzip2 does not use any 
+   patented algorithms.  However, I do not have the resources 
+   to carry out a patent search.  Therefore I cannot give any 
+   guarantee of the above statement.
+
+
+
+WHAT'S NEW IN 0.9.0 (as compared to 0.1pl2) ?
+
+   * Approx 10% faster compression, 30% faster decompression
+   * -t (test mode) is a lot quicker
+   * Can decompress concatenated compressed files
+   * Programming interface, so programs can directly read/write .bz2 files
+   * Less restrictive (BSD-style) licensing
+   * Flag handling more compatible with GNU gzip
+   * Much more documentation, i.e., a proper user manual
+   * Hopefully, improved portability (at least of the library)
+
+WHAT'S NEW IN 0.9.5 ?
+
+   * Compression speed is much less sensitive to the input
+     data than in previous versions.  Specifically, the very
+     slow performance caused by repetitive data is fixed.
+   * Many small improvements in file and flag handling.
+   * A Y2K statement.
+
+WHAT'S NEW IN 1.0.0 ?
+
+   See the CHANGES file.
+
+WHAT'S NEW IN 1.0.2 ?
+
+   See the CHANGES file.
+
+WHAT'S NEW IN 1.0.3 ?
+
+   See the CHANGES file.
+
+WHAT'S NEW IN 1.0.4 ?
+
+   See the CHANGES file.
+
+WHAT'S NEW IN 1.0.5 ?
+
+   See the CHANGES file.
+
+
+I hope you find bzip2 useful.  Feel free to contact me at
+   jseward@bzip.org
+if you have any suggestions or queries.  Many people mailed me with
+comments, suggestions and patches after the releases of bzip-0.15,
+bzip-0.21, and bzip2 versions 0.1pl2, 0.9.0, 0.9.5, 1.0.0, 1.0.1,
+1.0.2 and 1.0.3, and the changes in bzip2 are largely a result of this
+feedback.  I thank you for your comments.
+
+bzip2's "home" is http://www.bzip.org/
+
+Julian Seward
+jseward@bzip.org
+Cambridge, UK.
+
+18     July 1996 (version 0.15)
+25   August 1996 (version 0.21)
+ 7   August 1997 (bzip2, version 0.1)
+29   August 1997 (bzip2, version 0.1pl2)
+23   August 1998 (bzip2, version 0.9.0)
+ 8     June 1999 (bzip2, version 0.9.5)
+ 4     Sept 1999 (bzip2, version 0.9.5d)
+ 5      May 2000 (bzip2, version 1.0pre8)
+30 December 2001 (bzip2, version 1.0.2pre1)
+15 February 2005 (bzip2, version 1.0.3)
+20 December 2006 (bzip2, version 1.0.4)
+10 December 2007 (bzip2, version 1.0.5)
diff --git a/Utilities/cmbzip2/blocksort.c b/Utilities/cmbzip2/blocksort.c
new file mode 100644
index 0000000000..bd2dec157f
--- /dev/null
+++ b/Utilities/cmbzip2/blocksort.c
@@ -0,0 +1,1094 @@
+
+/*-------------------------------------------------------------*/
+/*--- Block sorting machinery                               ---*/
+/*---                                           blocksort.c ---*/
+/*-------------------------------------------------------------*/
+
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
+
+   bzip2/libbzip2 version 1.0.5 of 10 December 2007
+   Copyright (C) 1996-2007 Julian Seward <jseward@bzip.org>
+
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
+
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
+
+
+#include "bzlib_private.h"
+
+/*---------------------------------------------*/
+/*--- Fallback O(N log(N)^2) sorting        ---*/
+/*--- algorithm, for repetitive blocks      ---*/
+/*---------------------------------------------*/
+
+/*---------------------------------------------*/
+static 
+__inline__
+void fallbackSimpleSort ( UInt32* fmap, 
+                          UInt32* eclass, 
+                          Int32   lo, 
+                          Int32   hi )
+{
+   Int32 i, j, tmp;
+   UInt32 ec_tmp;
+
+   if (lo == hi) return;
+
+   if (hi - lo > 3) {
+      for ( i = hi-4; i >= lo; i-- ) {
+         tmp = fmap[i];
+         ec_tmp = eclass[tmp];
+         for ( j = i+4; j <= hi && ec_tmp > eclass[fmap[j]]; j += 4 )
+            fmap[j-4] = fmap[j];
+         fmap[j-4] = tmp;
+      }
+   }
+
+   for ( i = hi-1; i >= lo; i-- ) {
+      tmp = fmap[i];
+      ec_tmp = eclass[tmp];
+      for ( j = i+1; j <= hi && ec_tmp > eclass[fmap[j]]; j++ )
+         fmap[j-1] = fmap[j];
+      fmap[j-1] = tmp;
+   }
+}
+
+
+/*---------------------------------------------*/
+#define fswap(zz1, zz2) \
+   { Int32 zztmp = zz1; zz1 = zz2; zz2 = zztmp; }
+
+#define fvswap(zzp1, zzp2, zzn)       \
+{                                     \
+   Int32 yyp1 = (zzp1);               \
+   Int32 yyp2 = (zzp2);               \
+   Int32 yyn  = (zzn);                \
+   while (yyn > 0) {                  \
+      fswap(fmap[yyp1], fmap[yyp2]);  \
+      yyp1++; yyp2++; yyn--;          \
+   }                                  \
+}
+
+
+#define fmin(a,b) ((a) < (b)) ? (a) : (b)
+
+#define fpush(lz,hz) { stackLo[sp] = lz; \
+                       stackHi[sp] = hz; \
+                       sp++; }
+
+#define fpop(lz,hz) { sp--;              \
+                      lz = stackLo[sp];  \
+                      hz = stackHi[sp]; }
+
+#define FALLBACK_QSORT_SMALL_THRESH 10
+#define FALLBACK_QSORT_STACK_SIZE   100
+
+
+static
+void fallbackQSort3 ( UInt32* fmap, 
+                      UInt32* eclass,
+                      Int32   loSt, 
+                      Int32   hiSt )
+{
+   Int32 unLo, unHi, ltLo, gtHi, n, m;
+   Int32 sp, lo, hi;
+   UInt32 med, r, r3;
+   Int32 stackLo[FALLBACK_QSORT_STACK_SIZE];
+   Int32 stackHi[FALLBACK_QSORT_STACK_SIZE];
+
+   r = 0;
+
+   sp = 0;
+   fpush ( loSt, hiSt );
+
+   while (sp > 0) {
+
+      AssertH ( sp < FALLBACK_QSORT_STACK_SIZE - 1, 1004 );
+
+      fpop ( lo, hi );
+      if (hi - lo < FALLBACK_QSORT_SMALL_THRESH) {
+         fallbackSimpleSort ( fmap, eclass, lo, hi );
+         continue;
+      }
+
+      /* Random partitioning.  Median of 3 sometimes fails to
+         avoid bad cases.  Median of 9 seems to help but 
+         looks rather expensive.  This too seems to work but
+         is cheaper.  Guidance for the magic constants 
+         7621 and 32768 is taken from Sedgewick's algorithms
+         book, chapter 35.
+      */
+      r = ((r * 7621) + 1) % 32768;
+      r3 = r % 3;
+      if (r3 == 0) med = eclass[fmap[lo]]; else
+      if (r3 == 1) med = eclass[fmap[(lo+hi)>>1]]; else
+                   med = eclass[fmap[hi]];
+
+      unLo = ltLo = lo;
+      unHi = gtHi = hi;
+
+      while (1) {
+         while (1) {
+            if (unLo > unHi) break;
+            n = (Int32)eclass[fmap[unLo]] - (Int32)med;
+            if (n == 0) { 
+               fswap(fmap[unLo], fmap[ltLo]); 
+               ltLo++; unLo++; 
+               continue; 
+            };
+            if (n > 0) break;
+            unLo++;
+         }
+         while (1) {
+            if (unLo > unHi) break;
+            n = (Int32)eclass[fmap[unHi]] - (Int32)med;
+            if (n == 0) { 
+               fswap(fmap[unHi], fmap[gtHi]); 
+               gtHi--; unHi--; 
+               continue; 
+            };
+            if (n < 0) break;
+            unHi--;
+         }
+         if (unLo > unHi) break;
+         fswap(fmap[unLo], fmap[unHi]); unLo++; unHi--;
+      }
+
+      AssertD ( unHi == unLo-1, "fallbackQSort3(2)" );
+
+      if (gtHi < ltLo) continue;
+
+      n = fmin(ltLo-lo, unLo-ltLo); fvswap(lo, unLo-n, n);
+      m = fmin(hi-gtHi, gtHi-unHi); fvswap(unLo, hi-m+1, m);
+
+      n = lo + unLo - ltLo - 1;
+      m = hi - (gtHi - unHi) + 1;
+
+      if (n - lo > hi - m) {
+         fpush ( lo, n );
+         fpush ( m, hi );
+      } else {
+         fpush ( m, hi );
+         fpush ( lo, n );
+      }
+   }
+}
+
+#undef fmin
+#undef fpush
+#undef fpop
+#undef fswap
+#undef fvswap
+#undef FALLBACK_QSORT_SMALL_THRESH
+#undef FALLBACK_QSORT_STACK_SIZE
+
+
+/*---------------------------------------------*/
+/* Pre:
+      nblock > 0
+      eclass exists for [0 .. nblock-1]
+      ((UChar*)eclass) [0 .. nblock-1] holds block
+      ptr exists for [0 .. nblock-1]
+
+   Post:
+      ((UChar*)eclass) [0 .. nblock-1] holds block
+      All other areas of eclass destroyed
+      fmap [0 .. nblock-1] holds sorted order
+      bhtab [ 0 .. 2+(nblock/32) ] destroyed
+*/
+
+#define       SET_BH(zz)  bhtab[(zz) >> 5] |= (1 << ((zz) & 31))
+#define     CLEAR_BH(zz)  bhtab[(zz) >> 5] &= ~(1 << ((zz) & 31))
+#define     ISSET_BH(zz)  (bhtab[(zz) >> 5] & (1 << ((zz) & 31)))
+#define      WORD_BH(zz)  bhtab[(zz) >> 5]
+#define UNALIGNED_BH(zz)  ((zz) & 0x01f)
+
+static
+void fallbackSort ( UInt32* fmap, 
+                    UInt32* eclass, 
+                    UInt32* bhtab,
+                    Int32   nblock,
+                    Int32   verb )
+{
+   Int32 ftab[257];
+   Int32 ftabCopy[256];
+   Int32 H, i, j, k, l, r, cc, cc1;
+   Int32 nNotDone;
+   Int32 nBhtab;
+   UChar* eclass8 = (UChar*)eclass;
+
+   /*--
+      Initial 1-char radix sort to generate
+      initial fmap and initial BH bits.
+   --*/
+   if (verb >= 4)
+      VPrintf0 ( "        bucket sorting ...\n" );
+   for (i = 0; i < 257;    i++) ftab[i] = 0;
+   for (i = 0; i < nblock; i++) ftab[eclass8[i]]++;
+   for (i = 0; i < 256;    i++) ftabCopy[i] = ftab[i];
+   for (i = 1; i < 257;    i++) ftab[i] += ftab[i-1];
+
+   for (i = 0; i < nblock; i++) {
+      j = eclass8[i];
+      k = ftab[j] - 1;
+      ftab[j] = k;
+      fmap[k] = i;
+   }
+
+   nBhtab = 2 + (nblock / 32);
+   for (i = 0; i < nBhtab; i++) bhtab[i] = 0;
+   for (i = 0; i < 256; i++) SET_BH(ftab[i]);
+
+   /*--
+      Inductively refine the buckets.  Kind-of an
+      "exponential radix sort" (!), inspired by the
+      Manber-Myers suffix array construction algorithm.
+   --*/
+
+   /*-- set sentinel bits for block-end detection --*/
+   for (i = 0; i < 32; i++) { 
+      SET_BH(nblock + 2*i);
+      CLEAR_BH(nblock + 2*i + 1);
+   }
+
+   /*-- the log(N) loop --*/
+   H = 1;
+   while (1) {
+
+      if (verb >= 4) 
+         VPrintf1 ( "        depth %6d has ", H );
+
+      j = 0;
+      for (i = 0; i < nblock; i++) {
+         if (ISSET_BH(i)) j = i;
+         k = fmap[i] - H; if (k < 0) k += nblock;
+         eclass[k] = j;
+      }
+
+      nNotDone = 0;
+      r = -1;
+      while (1) {
+
+	 /*-- find the next non-singleton bucket --*/
+         k = r + 1;
+         while (ISSET_BH(k) && UNALIGNED_BH(k)) k++;
+         if (ISSET_BH(k)) {
+            while (WORD_BH(k) == 0xffffffff) k += 32;
+            while (ISSET_BH(k)) k++;
+         }
+         l = k - 1;
+         if (l >= nblock) break;
+         while (!ISSET_BH(k) && UNALIGNED_BH(k)) k++;
+         if (!ISSET_BH(k)) {
+            while (WORD_BH(k) == 0x00000000) k += 32;
+            while (!ISSET_BH(k)) k++;
+         }
+         r = k - 1;
+         if (r >= nblock) break;
+
+         /*-- now [l, r] bracket current bucket --*/
+         if (r > l) {
+            nNotDone += (r - l + 1);
+            fallbackQSort3 ( fmap, eclass, l, r );
+
+            /*-- scan bucket and generate header bits-- */
+            cc = -1;
+            for (i = l; i <= r; i++) {
+               cc1 = eclass[fmap[i]];
+               if (cc != cc1) { SET_BH(i); cc = cc1; };
+            }
+         }
+      }
+
+      if (verb >= 4) 
+         VPrintf1 ( "%6d unresolved strings\n", nNotDone );
+
+      H *= 2;
+      if (H > nblock || nNotDone == 0) break;
+   }
+
+   /*-- 
+      Reconstruct the original block in
+      eclass8 [0 .. nblock-1], since the
+      previous phase destroyed it.
+   --*/
+   if (verb >= 4)
+      VPrintf0 ( "        reconstructing block ...\n" );
+   j = 0;
+   for (i = 0; i < nblock; i++) {
+      while (ftabCopy[j] == 0) j++;
+      ftabCopy[j]--;
+      eclass8[fmap[i]] = (UChar)j;
+   }
+   AssertH ( j < 256, 1005 );
+}
+
+#undef       SET_BH
+#undef     CLEAR_BH
+#undef     ISSET_BH
+#undef      WORD_BH
+#undef UNALIGNED_BH
+
+
+/*---------------------------------------------*/
+/*--- The main, O(N^2 log(N)) sorting       ---*/
+/*--- algorithm.  Faster for "normal"       ---*/
+/*--- non-repetitive blocks.                ---*/
+/*---------------------------------------------*/
+
+/*---------------------------------------------*/
+static
+__inline__
+Bool mainGtU ( UInt32  i1, 
+               UInt32  i2,
+               UChar*  block, 
+               UInt16* quadrant,
+               UInt32  nblock,
+               Int32*  budget )
+{
+   Int32  k;
+   UChar  c1, c2;
+   UInt16 s1, s2;
+
+   AssertD ( i1 != i2, "mainGtU" );
+   /* 1 */
+   c1 = block[i1]; c2 = block[i2];
+   if (c1 != c2) return (c1 > c2);
+   i1++; i2++;
+   /* 2 */
+   c1 = block[i1]; c2 = block[i2];
+   if (c1 != c2) return (c1 > c2);
+   i1++; i2++;
+   /* 3 */
+   c1 = block[i1]; c2 = block[i2];
+   if (c1 != c2) return (c1 > c2);
+   i1++; i2++;
+   /* 4 */
+   c1 = block[i1]; c2 = block[i2];
+   if (c1 != c2) return (c1 > c2);
+   i1++; i2++;
+   /* 5 */
+   c1 = block[i1]; c2 = block[i2];
+   if (c1 != c2) return (c1 > c2);
+   i1++; i2++;
+   /* 6 */
+   c1 = block[i1]; c2 = block[i2];
+   if (c1 != c2) return (c1 > c2);
+   i1++; i2++;
+   /* 7 */
+   c1 = block[i1]; c2 = block[i2];
+   if (c1 != c2) return (c1 > c2);
+   i1++; i2++;
+   /* 8 */
+   c1 = block[i1]; c2 = block[i2];
+   if (c1 != c2) return (c1 > c2);
+   i1++; i2++;
+   /* 9 */
+   c1 = block[i1]; c2 = block[i2];
+   if (c1 != c2) return (c1 > c2);
+   i1++; i2++;
+   /* 10 */
+   c1 = block[i1]; c2 = block[i2];
+   if (c1 != c2) return (c1 > c2);
+   i1++; i2++;
+   /* 11 */
+   c1 = block[i1]; c2 = block[i2];
+   if (c1 != c2) return (c1 > c2);
+   i1++; i2++;
+   /* 12 */
+   c1 = block[i1]; c2 = block[i2];
+   if (c1 != c2) return (c1 > c2);
+   i1++; i2++;
+
+   k = nblock + 8;
+
+   do {
+      /* 1 */
+      c1 = block[i1]; c2 = block[i2];
+      if (c1 != c2) return (c1 > c2);
+      s1 = quadrant[i1]; s2 = quadrant[i2];
+      if (s1 != s2) return (s1 > s2);
+      i1++; i2++;
+      /* 2 */
+      c1 = block[i1]; c2 = block[i2];
+      if (c1 != c2) return (c1 > c2);
+      s1 = quadrant[i1]; s2 = quadrant[i2];
+      if (s1 != s2) return (s1 > s2);
+      i1++; i2++;
+      /* 3 */
+      c1 = block[i1]; c2 = block[i2];
+      if (c1 != c2) return (c1 > c2);
+      s1 = quadrant[i1]; s2 = quadrant[i2];
+      if (s1 != s2) return (s1 > s2);
+      i1++; i2++;
+      /* 4 */
+      c1 = block[i1]; c2 = block[i2];
+      if (c1 != c2) return (c1 > c2);
+      s1 = quadrant[i1]; s2 = quadrant[i2];
+      if (s1 != s2) return (s1 > s2);
+      i1++; i2++;
+      /* 5 */
+      c1 = block[i1]; c2 = block[i2];
+      if (c1 != c2) return (c1 > c2);
+      s1 = quadrant[i1]; s2 = quadrant[i2];
+      if (s1 != s2) return (s1 > s2);
+      i1++; i2++;
+      /* 6 */
+      c1 = block[i1]; c2 = block[i2];
+      if (c1 != c2) return (c1 > c2);
+      s1 = quadrant[i1]; s2 = quadrant[i2];
+      if (s1 != s2) return (s1 > s2);
+      i1++; i2++;
+      /* 7 */
+      c1 = block[i1]; c2 = block[i2];
+      if (c1 != c2) return (c1 > c2);
+      s1 = quadrant[i1]; s2 = quadrant[i2];
+      if (s1 != s2) return (s1 > s2);
+      i1++; i2++;
+      /* 8 */
+      c1 = block[i1]; c2 = block[i2];
+      if (c1 != c2) return (c1 > c2);
+      s1 = quadrant[i1]; s2 = quadrant[i2];
+      if (s1 != s2) return (s1 > s2);
+      i1++; i2++;
+
+      if (i1 >= nblock) i1 -= nblock;
+      if (i2 >= nblock) i2 -= nblock;
+
+      k -= 8;
+      (*budget)--;
+   }
+      while (k >= 0);
+
+   return False;
+}
+
+
+/*---------------------------------------------*/
+/*--
+   Knuth's increments seem to work better
+   than Incerpi-Sedgewick here.  Possibly
+   because the number of elems to sort is
+   usually small, typically <= 20.
+--*/
+static
+Int32 incs[14] = { 1, 4, 13, 40, 121, 364, 1093, 3280,
+                   9841, 29524, 88573, 265720,
+                   797161, 2391484 };
+
+static
+void mainSimpleSort ( UInt32* ptr,
+                      UChar*  block,
+                      UInt16* quadrant,
+                      Int32   nblock,
+                      Int32   lo, 
+                      Int32   hi, 
+                      Int32   d,
+                      Int32*  budget )
+{
+   Int32 i, j, h, bigN, hp;
+   UInt32 v;
+
+   bigN = hi - lo + 1;
+   if (bigN < 2) return;
+
+   hp = 0;
+   while (incs[hp] < bigN) hp++;
+   hp--;
+
+   for (; hp >= 0; hp--) {
+      h = incs[hp];
+
+      i = lo + h;
+      while (True) {
+
+         /*-- copy 1 --*/
+         if (i > hi) break;
+         v = ptr[i];
+         j = i;
+         while ( mainGtU ( 
+                    ptr[j-h]+d, v+d, block, quadrant, nblock, budget 
+                 ) ) {
+            ptr[j] = ptr[j-h];
+            j = j - h;
+            if (j <= (lo + h - 1)) break;
+         }
+         ptr[j] = v;
+         i++;
+
+         /*-- copy 2 --*/
+         if (i > hi) break;
+         v = ptr[i];
+         j = i;
+         while ( mainGtU ( 
+                    ptr[j-h]+d, v+d, block, quadrant, nblock, budget 
+                 ) ) {
+            ptr[j] = ptr[j-h];
+            j = j - h;
+            if (j <= (lo + h - 1)) break;
+         }
+         ptr[j] = v;
+         i++;
+
+         /*-- copy 3 --*/
+         if (i > hi) break;
+         v = ptr[i];
+         j = i;
+         while ( mainGtU ( 
+                    ptr[j-h]+d, v+d, block, quadrant, nblock, budget 
+                 ) ) {
+            ptr[j] = ptr[j-h];
+            j = j - h;
+            if (j <= (lo + h - 1)) break;
+         }
+         ptr[j] = v;
+         i++;
+
+         if (*budget < 0) return;
+      }
+   }
+}
+
+
+/*---------------------------------------------*/
+/*--
+   The following is an implementation of
+   an elegant 3-way quicksort for strings,
+   described in a paper "Fast Algorithms for
+   Sorting and Searching Strings", by Robert
+   Sedgewick and Jon L. Bentley.
+--*/
+
+#define mswap(zz1, zz2) \
+   { Int32 zztmp = zz1; zz1 = zz2; zz2 = zztmp; }
+
+#define mvswap(zzp1, zzp2, zzn)       \
+{                                     \
+   Int32 yyp1 = (zzp1);               \
+   Int32 yyp2 = (zzp2);               \
+   Int32 yyn  = (zzn);                \
+   while (yyn > 0) {                  \
+      mswap(ptr[yyp1], ptr[yyp2]);    \
+      yyp1++; yyp2++; yyn--;          \
+   }                                  \
+}
+
+static 
+__inline__
+UChar mmed3 ( UChar a, UChar b, UChar c )
+{
+   UChar t;
+   if (a > b) { t = a; a = b; b = t; };
+   if (b > c) { 
+      b = c;
+      if (a > b) b = a;
+   }
+   return b;
+}
+
+#define mmin(a,b) ((a) < (b)) ? (a) : (b)
+
+#define mpush(lz,hz,dz) { stackLo[sp] = lz; \
+                          stackHi[sp] = hz; \
+                          stackD [sp] = dz; \
+                          sp++; }
+
+#define mpop(lz,hz,dz) { sp--;             \
+                         lz = stackLo[sp]; \
+                         hz = stackHi[sp]; \
+                         dz = stackD [sp]; }
+
+
+#define mnextsize(az) (nextHi[az]-nextLo[az])
+
+#define mnextswap(az,bz)                                        \
+   { Int32 tz;                                                  \
+     tz = nextLo[az]; nextLo[az] = nextLo[bz]; nextLo[bz] = tz; \
+     tz = nextHi[az]; nextHi[az] = nextHi[bz]; nextHi[bz] = tz; \
+     tz = nextD [az]; nextD [az] = nextD [bz]; nextD [bz] = tz; }
+
+
+#define MAIN_QSORT_SMALL_THRESH 20
+#define MAIN_QSORT_DEPTH_THRESH (BZ_N_RADIX + BZ_N_QSORT)
+#define MAIN_QSORT_STACK_SIZE 100
+
+static
+void mainQSort3 ( UInt32* ptr,
+                  UChar*  block,
+                  UInt16* quadrant,
+                  Int32   nblock,
+                  Int32   loSt, 
+                  Int32   hiSt, 
+                  Int32   dSt,
+                  Int32*  budget )
+{
+   Int32 unLo, unHi, ltLo, gtHi, n, m, med;
+   Int32 sp, lo, hi, d;
+
+   Int32 stackLo[MAIN_QSORT_STACK_SIZE];
+   Int32 stackHi[MAIN_QSORT_STACK_SIZE];
+   Int32 stackD [MAIN_QSORT_STACK_SIZE];
+
+   Int32 nextLo[3];
+   Int32 nextHi[3];
+   Int32 nextD [3];
+
+   sp = 0;
+   mpush ( loSt, hiSt, dSt );
+
+   while (sp > 0) {
+
+      AssertH ( sp < MAIN_QSORT_STACK_SIZE - 2, 1001 );
+
+      mpop ( lo, hi, d );
+      if (hi - lo < MAIN_QSORT_SMALL_THRESH || 
+          d > MAIN_QSORT_DEPTH_THRESH) {
+         mainSimpleSort ( ptr, block, quadrant, nblock, lo, hi, d, budget );
+         if (*budget < 0) return;
+         continue;
+      }
+
+      med = (Int32) 
+            mmed3 ( block[ptr[ lo         ]+d],
+                    block[ptr[ hi         ]+d],
+                    block[ptr[ (lo+hi)>>1 ]+d] );
+
+      unLo = ltLo = lo;
+      unHi = gtHi = hi;
+
+      while (True) {
+         while (True) {
+            if (unLo > unHi) break;
+            n = ((Int32)block[ptr[unLo]+d]) - med;
+            if (n == 0) { 
+               mswap(ptr[unLo], ptr[ltLo]); 
+               ltLo++; unLo++; continue; 
+            };
+            if (n >  0) break;
+            unLo++;
+         }
+         while (True) {
+            if (unLo > unHi) break;
+            n = ((Int32)block[ptr[unHi]+d]) - med;
+            if (n == 0) { 
+               mswap(ptr[unHi], ptr[gtHi]); 
+               gtHi--; unHi--; continue; 
+            };
+            if (n <  0) break;
+            unHi--;
+         }
+         if (unLo > unHi) break;
+         mswap(ptr[unLo], ptr[unHi]); unLo++; unHi--;
+      }
+
+      AssertD ( unHi == unLo-1, "mainQSort3(2)" );
+
+      if (gtHi < ltLo) {
+         mpush(lo, hi, d+1 );
+         continue;
+      }
+
+      n = mmin(ltLo-lo, unLo-ltLo); mvswap(lo, unLo-n, n);
+      m = mmin(hi-gtHi, gtHi-unHi); mvswap(unLo, hi-m+1, m);
+
+      n = lo + unLo - ltLo - 1;
+      m = hi - (gtHi - unHi) + 1;
+
+      nextLo[0] = lo;  nextHi[0] = n;   nextD[0] = d;
+      nextLo[1] = m;   nextHi[1] = hi;  nextD[1] = d;
+      nextLo[2] = n+1; nextHi[2] = m-1; nextD[2] = d+1;
+
+      if (mnextsize(0) < mnextsize(1)) mnextswap(0,1);
+      if (mnextsize(1) < mnextsize(2)) mnextswap(1,2);
+      if (mnextsize(0) < mnextsize(1)) mnextswap(0,1);
+
+      AssertD (mnextsize(0) >= mnextsize(1), "mainQSort3(8)" );
+      AssertD (mnextsize(1) >= mnextsize(2), "mainQSort3(9)" );
+
+      mpush (nextLo[0], nextHi[0], nextD[0]);
+      mpush (nextLo[1], nextHi[1], nextD[1]);
+      mpush (nextLo[2], nextHi[2], nextD[2]);
+   }
+}
+
+#undef mswap
+#undef mvswap
+#undef mpush
+#undef mpop
+#undef mmin
+#undef mnextsize
+#undef mnextswap
+#undef MAIN_QSORT_SMALL_THRESH
+#undef MAIN_QSORT_DEPTH_THRESH
+#undef MAIN_QSORT_STACK_SIZE
+
+
+/*---------------------------------------------*/
+/* Pre:
+      nblock > N_OVERSHOOT
+      block32 exists for [0 .. nblock-1 +N_OVERSHOOT]
+      ((UChar*)block32) [0 .. nblock-1] holds block
+      ptr exists for [0 .. nblock-1]
+
+   Post:
+      ((UChar*)block32) [0 .. nblock-1] holds block
+      All other areas of block32 destroyed
+      ftab [0 .. 65536 ] destroyed
+      ptr [0 .. nblock-1] holds sorted order
+      if (*budget < 0), sorting was abandoned
+*/
+
+#define BIGFREQ(b) (ftab[((b)+1) << 8] - ftab[(b) << 8])
+#define SETMASK (1 << 21)
+#define CLEARMASK (~(SETMASK))
+
+static
+void mainSort ( UInt32* ptr, 
+                UChar*  block,
+                UInt16* quadrant, 
+                UInt32* ftab,
+                Int32   nblock,
+                Int32   verb,
+                Int32*  budget )
+{
+   Int32  i, j, k, ss, sb;
+   Int32  runningOrder[256];
+   Bool   bigDone[256];
+   Int32  copyStart[256];
+   Int32  copyEnd  [256];
+   UChar  c1;
+   Int32  numQSorted;
+   UInt16 s;
+   if (verb >= 4) VPrintf0 ( "        main sort initialise ...\n" );
+
+   /*-- set up the 2-byte frequency table --*/
+   for (i = 65536; i >= 0; i--) ftab[i] = 0;
+
+   j = block[0] << 8;
+   i = nblock-1;
+   for (; i >= 3; i -= 4) {
+      quadrant[i] = 0;
+      j = (j >> 8) | ( ((UInt16)block[i]) << 8);
+      ftab[j]++;
+      quadrant[i-1] = 0;
+      j = (j >> 8) | ( ((UInt16)block[i-1]) << 8);
+      ftab[j]++;
+      quadrant[i-2] = 0;
+      j = (j >> 8) | ( ((UInt16)block[i-2]) << 8);
+      ftab[j]++;
+      quadrant[i-3] = 0;
+      j = (j >> 8) | ( ((UInt16)block[i-3]) << 8);
+      ftab[j]++;
+   }
+   for (; i >= 0; i--) {
+      quadrant[i] = 0;
+      j = (j >> 8) | ( ((UInt16)block[i]) << 8);
+      ftab[j]++;
+   }
+
+   /*-- (emphasises close relationship of block & quadrant) --*/
+   for (i = 0; i < BZ_N_OVERSHOOT; i++) {
+      block   [nblock+i] = block[i];
+      quadrant[nblock+i] = 0;
+   }
+
+   if (verb >= 4) VPrintf0 ( "        bucket sorting ...\n" );
+
+   /*-- Complete the initial radix sort --*/
+   for (i = 1; i <= 65536; i++) ftab[i] += ftab[i-1];
+
+   s = block[0] << 8;
+   i = nblock-1;
+   for (; i >= 3; i -= 4) {
+      s = (s >> 8) | (block[i] << 8);
+      j = ftab[s] -1;
+      ftab[s] = j;
+      ptr[j] = i;
+      s = (s >> 8) | (block[i-1] << 8);
+      j = ftab[s] -1;
+      ftab[s] = j;
+      ptr[j] = i-1;
+      s = (s >> 8) | (block[i-2] << 8);
+      j = ftab[s] -1;
+      ftab[s] = j;
+      ptr[j] = i-2;
+      s = (s >> 8) | (block[i-3] << 8);
+      j = ftab[s] -1;
+      ftab[s] = j;
+      ptr[j] = i-3;
+   }
+   for (; i >= 0; i--) {
+      s = (s >> 8) | (block[i] << 8);
+      j = ftab[s] -1;
+      ftab[s] = j;
+      ptr[j] = i;
+   }
+
+   /*--
+      Now ftab contains the first loc of every small bucket.
+      Calculate the running order, from smallest to largest
+      big bucket.
+   --*/
+   for (i = 0; i <= 255; i++) {
+      bigDone     [i] = False;
+      runningOrder[i] = i;
+   }
+
+   {
+      Int32 vv;
+      Int32 h = 1;
+      do h = 3 * h + 1; while (h <= 256);
+      do {
+         h = h / 3;
+         for (i = h; i <= 255; i++) {
+            vv = runningOrder[i];
+            j = i;
+            while ( BIGFREQ(runningOrder[j-h]) > BIGFREQ(vv) ) {
+               runningOrder[j] = runningOrder[j-h];
+               j = j - h;
+               if (j <= (h - 1)) goto zero;
+            }
+            zero:
+            runningOrder[j] = vv;
+         }
+      } while (h != 1);
+   }
+
+   /*--
+      The main sorting loop.
+   --*/
+
+   numQSorted = 0;
+
+   for (i = 0; i <= 255; i++) {
+
+      /*--
+         Process big buckets, starting with the least full.
+         Basically this is a 3-step process in which we call
+         mainQSort3 to sort the small buckets [ss, j], but
+         also make a big effort to avoid the calls if we can.
+      --*/
+      ss = runningOrder[i];
+
+      /*--
+         Step 1:
+         Complete the big bucket [ss] by quicksorting
+         any unsorted small buckets [ss, j], for j != ss.  
+         Hopefully previous pointer-scanning phases have already
+         completed many of the small buckets [ss, j], so
+         we don't have to sort them at all.
+      --*/
+      for (j = 0; j <= 255; j++) {
+         if (j != ss) {
+            sb = (ss << 8) + j;
+            if ( ! (ftab[sb] & SETMASK) ) {
+               Int32 lo = ftab[sb]   & CLEARMASK;
+               Int32 hi = (ftab[sb+1] & CLEARMASK) - 1;
+               if (hi > lo) {
+                  if (verb >= 4)
+                     VPrintf4 ( "        qsort [0x%x, 0x%x]   "
+                                "done %d   this %d\n",
+                                ss, j, numQSorted, hi - lo + 1 );
+                  mainQSort3 ( 
+                     ptr, block, quadrant, nblock, 
+                     lo, hi, BZ_N_RADIX, budget 
+                  );   
+                  numQSorted += (hi - lo + 1);
+                  if (*budget < 0) return;
+               }
+            }
+            ftab[sb] |= SETMASK;
+         }
+      }
+
+      AssertH ( !bigDone[ss], 1006 );
+
+      /*--
+         Step 2:
+         Now scan this big bucket [ss] so as to synthesise the
+         sorted order for small buckets [t, ss] for all t,
+         including, magically, the bucket [ss,ss] too.
+         This will avoid doing Real Work in subsequent Step 1's.
+      --*/
+      {
+         for (j = 0; j <= 255; j++) {
+            copyStart[j] =  ftab[(j << 8) + ss]     & CLEARMASK;
+            copyEnd  [j] = (ftab[(j << 8) + ss + 1] & CLEARMASK) - 1;
+         }
+         for (j = ftab[ss << 8] & CLEARMASK; j < copyStart[ss]; j++) {
+            k = ptr[j]-1; if (k < 0) k += nblock;
+            c1 = block[k];
+            if (!bigDone[c1])
+               ptr[ copyStart[c1]++ ] = k;
+         }
+         for (j = (ftab[(ss+1) << 8] & CLEARMASK) - 1; j > copyEnd[ss]; j--) {
+            k = ptr[j]-1; if (k < 0) k += nblock;
+            c1 = block[k];
+            if (!bigDone[c1]) 
+               ptr[ copyEnd[c1]-- ] = k;
+         }
+      }
+
+      AssertH ( (copyStart[ss]-1 == copyEnd[ss])
+                || 
+                /* Extremely rare case missing in bzip2-1.0.0 and 1.0.1.
+                   Necessity for this case is demonstrated by compressing 
+                   a sequence of approximately 48.5 million of character 
+                   251; 1.0.0/1.0.1 will then die here. */
+                (copyStart[ss] == 0 && copyEnd[ss] == nblock-1),
+                1007 )
+
+      for (j = 0; j <= 255; j++) ftab[(j << 8) + ss] |= SETMASK;
+
+      /*--
+         Step 3:
+         The [ss] big bucket is now done.  Record this fact,
+         and update the quadrant descriptors.  Remember to
+         update quadrants in the overshoot area too, if
+         necessary.  The "if (i < 255)" test merely skips
+         this updating for the last bucket processed, since
+         updating for the last bucket is pointless.
+
+         The quadrant array provides a way to incrementally
+         cache sort orderings, as they appear, so as to 
+         make subsequent comparisons in fullGtU() complete
+         faster.  For repetitive blocks this makes a big
+         difference (but not big enough to be able to avoid
+         the fallback sorting mechanism, exponential radix sort).
+
+         The precise meaning is: at all times:
+
+            for 0 <= i < nblock and 0 <= j <= nblock
+
+            if block[i] != block[j], 
+
+               then the relative values of quadrant[i] and 
+                    quadrant[j] are meaningless.
+
+               else {
+                  if quadrant[i] < quadrant[j]
+                     then the string starting at i lexicographically
+                     precedes the string starting at j
+
+                  else if quadrant[i] > quadrant[j]
+                     then the string starting at j lexicographically
+                     precedes the string starting at i
+
+                  else
+                     the relative ordering of the strings starting
+                     at i and j has not yet been determined.
+               }
+      --*/
+      bigDone[ss] = True;
+
+      if (i < 255) {
+         Int32 bbStart  = ftab[ss << 8] & CLEARMASK;
+         Int32 bbSize   = (ftab[(ss+1) << 8] & CLEARMASK) - bbStart;
+         Int32 shifts   = 0;
+
+         while ((bbSize >> shifts) > 65534) shifts++;
+
+         for (j = bbSize-1; j >= 0; j--) {
+            Int32 a2update     = ptr[bbStart + j];
+            UInt16 qVal        = (UInt16)(j >> shifts);
+            quadrant[a2update] = qVal;
+            if (a2update < BZ_N_OVERSHOOT)
+               quadrant[a2update + nblock] = qVal;
+         }
+         AssertH ( ((bbSize-1) >> shifts) <= 65535, 1002 );
+      }
+
+   }
+
+   if (verb >= 4)
+      VPrintf3 ( "        %d pointers, %d sorted, %d scanned\n",
+                 nblock, numQSorted, nblock - numQSorted );
+}
+
+#undef BIGFREQ
+#undef SETMASK
+#undef CLEARMASK
+
+
+/*---------------------------------------------*/
+/* Pre:
+      nblock > 0
+      arr2 exists for [0 .. nblock-1 +N_OVERSHOOT]
+      ((UChar*)arr2)  [0 .. nblock-1] holds block
+      arr1 exists for [0 .. nblock-1]
+
+   Post:
+      ((UChar*)arr2) [0 .. nblock-1] holds block
+      All other areas of block destroyed
+      ftab [ 0 .. 65536 ] destroyed
+      arr1 [0 .. nblock-1] holds sorted order
+*/
+void BZ2_blockSort ( EState* s )
+{
+   UInt32* ptr    = s->ptr; 
+   UChar*  block  = s->block;
+   UInt32* ftab   = s->ftab;
+   Int32   nblock = s->nblock;
+   Int32   verb   = s->verbosity;
+   Int32   wfact  = s->workFactor;
+   UInt16* quadrant;
+   Int32   budget;
+   Int32   budgetInit;
+   Int32   i;
+
+   if (nblock < 10000) {
+      fallbackSort ( s->arr1, s->arr2, ftab, nblock, verb );
+   } else {
+      /* Calculate the location for quadrant, remembering to get
+         the alignment right.  Assumes that &(block[0]) is at least
+         2-byte aligned -- this should be ok since block is really
+         the first section of arr2.
+      */
+      i = nblock+BZ_N_OVERSHOOT;
+      if (i & 1) i++;
+      quadrant = (UInt16*)(&(block[i]));
+
+      /* (wfact-1) / 3 puts the default-factor-30
+         transition point at very roughly the same place as 
+         with v0.1 and v0.9.0.  
+         Not that it particularly matters any more, since the
+         resulting compressed stream is now the same regardless
+         of whether or not we use the main sort or fallback sort.
+      */
+      if (wfact < 1  ) wfact = 1;
+      if (wfact > 100) wfact = 100;
+      budgetInit = nblock * ((wfact-1) / 3);
+      budget = budgetInit;
+
+      mainSort ( ptr, block, quadrant, ftab, nblock, verb, &budget );
+      if (verb >= 3) 
+         VPrintf3 ( "      %d work, %d block, ratio %5.2f\n",
+                    budgetInit - budget,
+                    nblock, 
+                    (float)(budgetInit - budget) /
+                    (float)(nblock==0 ? 1 : nblock) ); 
+      if (budget < 0) {
+         if (verb >= 2) 
+            VPrintf0 ( "    too repetitive; using fallback"
+                       " sorting algorithm\n" );
+         fallbackSort ( s->arr1, s->arr2, ftab, nblock, verb );
+      }
+   }
+
+   s->origPtr = -1;
+   for (i = 0; i < s->nblock; i++)
+      if (ptr[i] == 0)
+         { s->origPtr = i; break; };
+
+   AssertH( s->origPtr != -1, 1003 );
+}
+
+
+/*-------------------------------------------------------------*/
+/*--- end                                       blocksort.c ---*/
+/*-------------------------------------------------------------*/
diff --git a/Utilities/cmbzip2/bzip2.c b/Utilities/cmbzip2/bzip2.c
new file mode 100644
index 0000000000..390410735b
--- /dev/null
+++ b/Utilities/cmbzip2/bzip2.c
@@ -0,0 +1,2034 @@
+
+/*-----------------------------------------------------------*/
+/*--- A block-sorting, lossless compressor        bzip2.c ---*/
+/*-----------------------------------------------------------*/
+
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
+
+   bzip2/libbzip2 version 1.0.5 of 10 December 2007
+   Copyright (C) 1996-2007 Julian Seward <jseward@bzip.org>
+
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
+
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
+
+
+/* Place a 1 beside your platform, and 0 elsewhere.
+   Generic 32-bit Unix.
+   Also works on 64-bit Unix boxes.
+   This is the default.
+*/
+#define BZ_UNIX      1
+
+/*--
+  Win32, as seen by Jacob Navia's excellent
+  port of (Chris Fraser & David Hanson)'s excellent
+  lcc compiler.  Or with MS Visual C.
+  This is selected automatically if compiled by a compiler which
+  defines _WIN32, not including the Cygwin GCC.
+--*/
+#define BZ_LCCWIN32  0
+
+#if defined(_WIN32) && !defined(__CYGWIN__)
+#undef  BZ_LCCWIN32
+#define BZ_LCCWIN32 1
+#undef  BZ_UNIX
+#define BZ_UNIX 0
+#endif
+
+
+/*---------------------------------------------*/
+/*--
+  Some stuff for all platforms.
+--*/
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <signal.h>
+#include <math.h>
+#include <errno.h>
+#include <ctype.h>
+#include "bzlib.h"
+
+#define ERROR_IF_EOF(i)       { if ((i) == EOF)  ioError(); }
+#define ERROR_IF_NOT_ZERO(i)  { if ((i) != 0)    ioError(); }
+#define ERROR_IF_MINUS_ONE(i) { if ((i) == (-1)) ioError(); }
+
+
+/*---------------------------------------------*/
+/*--
+   Platform-specific stuff.
+--*/
+
+#if BZ_UNIX
+#   include <fcntl.h>
+#   include <sys/types.h>
+#   include <utime.h>
+#   include <unistd.h>
+#   include <sys/stat.h>
+#   include <sys/times.h>
+
+#   define PATH_SEP    '/'
+#   define MY_LSTAT    lstat
+#   define MY_STAT     stat
+#   define MY_S_ISREG  S_ISREG
+#   define MY_S_ISDIR  S_ISDIR
+
+#   define APPEND_FILESPEC(root, name) \
+      root=snocString((root), (name))
+
+#   define APPEND_FLAG(root, name) \
+      root=snocString((root), (name))
+
+#   define SET_BINARY_MODE(fd) /**/
+
+#   ifdef __GNUC__
+#      define NORETURN __attribute__ ((noreturn))
+#   else
+#      define NORETURN /**/
+#   endif
+
+#   ifdef __DJGPP__
+#     include <io.h>
+#     include <fcntl.h>
+#     undef MY_LSTAT
+#     undef MY_STAT
+#     define MY_LSTAT stat
+#     define MY_STAT stat
+#     undef SET_BINARY_MODE
+#     define SET_BINARY_MODE(fd)                        \
+        do {                                            \
+           int retVal = setmode ( fileno ( fd ),        \
+                                  O_BINARY );           \
+           ERROR_IF_MINUS_ONE ( retVal );               \
+        } while ( 0 )
+#   endif
+
+#   ifdef __CYGWIN__
+#     include <io.h>
+#     include <fcntl.h>
+#     undef SET_BINARY_MODE
+#     define SET_BINARY_MODE(fd)                        \
+        do {                                            \
+           int retVal = setmode ( fileno ( fd ),        \
+                                  O_BINARY );           \
+           ERROR_IF_MINUS_ONE ( retVal );               \
+        } while ( 0 )
+#   endif
+#endif /* BZ_UNIX */
+
+
+
+#if BZ_LCCWIN32
+#   include <io.h>
+#   include <fcntl.h>
+#   include <sys\stat.h>
+
+#   define NORETURN       /**/
+#   define PATH_SEP       '\\'
+#   define MY_LSTAT       _stat
+#   define MY_STAT        _stat
+#   define MY_S_ISREG(x)  ((x) & _S_IFREG)
+#   define MY_S_ISDIR(x)  ((x) & _S_IFDIR)
+
+#   define APPEND_FLAG(root, name) \
+      root=snocString((root), (name))
+
+#   define APPEND_FILESPEC(root, name)                \
+      root = snocString ((root), (name))
+
+#   define SET_BINARY_MODE(fd)                        \
+      do {                                            \
+         int retVal = setmode ( fileno ( fd ),        \
+                                O_BINARY );           \
+         ERROR_IF_MINUS_ONE ( retVal );               \
+      } while ( 0 )
+
+#endif /* BZ_LCCWIN32 */
+
+
+/*---------------------------------------------*/
+/*--
+  Some more stuff for all platforms :-)
+--*/
+
+typedef char            Char;
+typedef unsigned char   Bool;
+typedef unsigned char   UChar;
+typedef int             Int32;
+typedef unsigned int    UInt32;
+typedef short           Int16;
+typedef unsigned short  UInt16;
+                                       
+#define True  ((Bool)1)
+#define False ((Bool)0)
+
+/*--
+  IntNative is your platform's `native' int size.
+  Only here to avoid probs with 64-bit platforms.
+--*/
+typedef int IntNative;
+
+
+/*---------------------------------------------------*/
+/*--- Misc (file handling) data decls             ---*/
+/*---------------------------------------------------*/
+
+Int32   verbosity;
+Bool    keepInputFiles, smallMode, deleteOutputOnInterrupt;
+Bool    forceOverwrite, testFailsExist, unzFailsExist, noisy;
+Int32   numFileNames, numFilesProcessed, blockSize100k;
+Int32   exitValue;
+
+/*-- source modes; F==file, I==stdin, O==stdout --*/
+#define SM_I2O           1
+#define SM_F2O           2
+#define SM_F2F           3
+
+/*-- operation modes --*/
+#define OM_Z             1
+#define OM_UNZ           2
+#define OM_TEST          3
+
+Int32   opMode;
+Int32   srcMode;
+
+#define FILE_NAME_LEN 1034
+
+Int32   longestFileName;
+Char    inName [FILE_NAME_LEN];
+Char    outName[FILE_NAME_LEN];
+Char    tmpName[FILE_NAME_LEN];
+Char    *progName;
+Char    progNameReally[FILE_NAME_LEN];
+FILE    *outputHandleJustInCase;
+Int32   workFactor;
+
+static void    panic                 ( const Char* ) NORETURN;
+static void    ioError               ( void )        NORETURN;
+static void    outOfMemory           ( void )        NORETURN;
+static void    configError           ( void )        NORETURN;
+static void    crcError              ( void )        NORETURN;
+static void    cleanUpAndFail        ( Int32 )       NORETURN;
+static void    compressedStreamEOF   ( void )        NORETURN;
+
+static void    copyFileName ( Char*, Char* );
+static void*   myMalloc     ( Int32 );
+static void    applySavedFileAttrToOutputFile ( IntNative fd );
+
+
+
+/*---------------------------------------------------*/
+/*--- An implementation of 64-bit ints.  Sigh.    ---*/
+/*--- Roll on widespread deployment of ANSI C9X ! ---*/
+/*---------------------------------------------------*/
+
+typedef
+   struct { UChar b[8]; } 
+   UInt64;
+
+
+static
+void uInt64_from_UInt32s ( UInt64* n, UInt32 lo32, UInt32 hi32 )
+{
+   n->b[7] = (UChar)((hi32 >> 24) & 0xFF);
+   n->b[6] = (UChar)((hi32 >> 16) & 0xFF);
+   n->b[5] = (UChar)((hi32 >> 8)  & 0xFF);
+   n->b[4] = (UChar) (hi32        & 0xFF);
+   n->b[3] = (UChar)((lo32 >> 24) & 0xFF);
+   n->b[2] = (UChar)((lo32 >> 16) & 0xFF);
+   n->b[1] = (UChar)((lo32 >> 8)  & 0xFF);
+   n->b[0] = (UChar) (lo32        & 0xFF);
+}
+
+
+static
+double uInt64_to_double ( UInt64* n )
+{
+   Int32  i;
+   double base = 1.0;
+   double sum  = 0.0;
+   for (i = 0; i < 8; i++) {
+      sum  += base * (double)(n->b[i]);
+      base *= 256.0;
+   }
+   return sum;
+}
+
+
+static
+Bool uInt64_isZero ( UInt64* n )
+{
+   Int32 i;
+   for (i = 0; i < 8; i++)
+      if (n->b[i] != 0) return 0;
+   return 1;
+}
+
+
+/* Divide *n by 10, and return the remainder.  */
+static 
+Int32 uInt64_qrm10 ( UInt64* n )
+{
+   UInt32 rem, tmp;
+   Int32  i;
+   rem = 0;
+   for (i = 7; i >= 0; i--) {
+      tmp = rem * 256 + n->b[i];
+      n->b[i] = tmp / 10;
+      rem = tmp % 10;
+   }
+   return rem;
+}
+
+
+/* ... and the Whole Entire Point of all this UInt64 stuff is
+   so that we can supply the following function.
+*/
+static
+void uInt64_toAscii ( char* outbuf, UInt64* n )
+{
+   Int32  i, q;
+   UChar  buf[32];
+   Int32  nBuf   = 0;
+   UInt64 n_copy = *n;
+   do {
+      q = uInt64_qrm10 ( &n_copy );
+      buf[nBuf] = q + '0';
+      nBuf++;
+   } while (!uInt64_isZero(&n_copy));
+   outbuf[nBuf] = 0;
+   for (i = 0; i < nBuf; i++) 
+      outbuf[i] = buf[nBuf-i-1];
+}
+
+
+/*---------------------------------------------------*/
+/*--- Processing of complete files and streams    ---*/
+/*---------------------------------------------------*/
+
+/*---------------------------------------------*/
+static 
+Bool myfeof ( FILE* f )
+{
+   Int32 c = fgetc ( f );
+   if (c == EOF) return True;
+   ungetc ( c, f );
+   return False;
+}
+
+
+/*---------------------------------------------*/
+static 
+void compressStream ( FILE *stream, FILE *zStream )
+{
+   BZFILE* bzf = NULL;
+   UChar   ibuf[5000];
+   Int32   nIbuf;
+   UInt32  nbytes_in_lo32, nbytes_in_hi32;
+   UInt32  nbytes_out_lo32, nbytes_out_hi32;
+   Int32   bzerr, bzerr_dummy, ret;
+
+   SET_BINARY_MODE(stream);
+   SET_BINARY_MODE(zStream);
+
+   if (ferror(stream)) goto errhandler_io;
+   if (ferror(zStream)) goto errhandler_io;
+
+   bzf = BZ2_bzWriteOpen ( &bzerr, zStream, 
+                           blockSize100k, verbosity, workFactor );   
+   if (bzerr != BZ_OK) goto errhandler;
+
+   if (verbosity >= 2) fprintf ( stderr, "\n" );
+
+   while (True) {
+
+      if (myfeof(stream)) break;
+      nIbuf = fread ( ibuf, sizeof(UChar), 5000, stream );
+      if (ferror(stream)) goto errhandler_io;
+      if (nIbuf > 0) BZ2_bzWrite ( &bzerr, bzf, (void*)ibuf, nIbuf );
+      if (bzerr != BZ_OK) goto errhandler;
+
+   }
+
+   BZ2_bzWriteClose64 ( &bzerr, bzf, 0, 
+                        &nbytes_in_lo32, &nbytes_in_hi32,
+                        &nbytes_out_lo32, &nbytes_out_hi32 );
+   if (bzerr != BZ_OK) goto errhandler;
+
+   if (ferror(zStream)) goto errhandler_io;
+   ret = fflush ( zStream );
+   if (ret == EOF) goto errhandler_io;
+   if (zStream != stdout) {
+      Int32 fd = fileno ( zStream );
+      if (fd < 0) goto errhandler_io;
+      applySavedFileAttrToOutputFile ( fd );
+      ret = fclose ( zStream );
+      outputHandleJustInCase = NULL;
+      if (ret == EOF) goto errhandler_io;
+   }
+   outputHandleJustInCase = NULL;
+   if (ferror(stream)) goto errhandler_io;
+   ret = fclose ( stream );
+   if (ret == EOF) goto errhandler_io;
+
+   if (verbosity >= 1) {
+      if (nbytes_in_lo32 == 0 && nbytes_in_hi32 == 0) {
+	 fprintf ( stderr, " no data compressed.\n");
+      } else {
+	 Char   buf_nin[32], buf_nout[32];
+	 UInt64 nbytes_in,   nbytes_out;
+	 double nbytes_in_d, nbytes_out_d;
+	 uInt64_from_UInt32s ( &nbytes_in, 
+			       nbytes_in_lo32, nbytes_in_hi32 );
+	 uInt64_from_UInt32s ( &nbytes_out, 
+			       nbytes_out_lo32, nbytes_out_hi32 );
+	 nbytes_in_d  = uInt64_to_double ( &nbytes_in );
+	 nbytes_out_d = uInt64_to_double ( &nbytes_out );
+	 uInt64_toAscii ( buf_nin, &nbytes_in );
+	 uInt64_toAscii ( buf_nout, &nbytes_out );
+	 fprintf ( stderr, "%6.3f:1, %6.3f bits/byte, "
+		   "%5.2f%% saved, %s in, %s out.\n",
+		   nbytes_in_d / nbytes_out_d,
+		   (8.0 * nbytes_out_d) / nbytes_in_d,
+		   100.0 * (1.0 - nbytes_out_d / nbytes_in_d),
+		   buf_nin,
+		   buf_nout
+		 );
+      }
+   }
+
+   return;
+
+   errhandler:
+   BZ2_bzWriteClose64 ( &bzerr_dummy, bzf, 1, 
+                        &nbytes_in_lo32, &nbytes_in_hi32,
+                        &nbytes_out_lo32, &nbytes_out_hi32 );
+   switch (bzerr) {
+      case BZ_CONFIG_ERROR:
+         configError(); break;
+      case BZ_MEM_ERROR:
+         outOfMemory (); break;
+      case BZ_IO_ERROR:
+         errhandler_io:
+         ioError(); break;
+      default:
+         panic ( "compress:unexpected error" );
+   }
+
+   panic ( "compress:end" );
+   /*notreached*/
+}
+
+
+
+/*---------------------------------------------*/
+static 
+Bool uncompressStream ( FILE *zStream, FILE *stream )
+{
+   BZFILE* bzf = NULL;
+   Int32   bzerr, bzerr_dummy, ret, nread, streamNo, i;
+   UChar   obuf[5000];
+   UChar   unused[BZ_MAX_UNUSED];
+   Int32   nUnused;
+   void*   unusedTmpV;
+   UChar*  unusedTmp;
+
+   nUnused = 0;
+   streamNo = 0;
+
+   SET_BINARY_MODE(stream);
+   SET_BINARY_MODE(zStream);
+
+   if (ferror(stream)) goto errhandler_io;
+   if (ferror(zStream)) goto errhandler_io;
+
+   while (True) {
+
+      bzf = BZ2_bzReadOpen ( 
+               &bzerr, zStream, verbosity, 
+               (int)smallMode, unused, nUnused
+            );
+      if (bzf == NULL || bzerr != BZ_OK) goto errhandler;
+      streamNo++;
+
+      while (bzerr == BZ_OK) {
+         nread = BZ2_bzRead ( &bzerr, bzf, obuf, 5000 );
+         if (bzerr == BZ_DATA_ERROR_MAGIC) goto trycat;
+         if ((bzerr == BZ_OK || bzerr == BZ_STREAM_END) && nread > 0)
+            fwrite ( obuf, sizeof(UChar), nread, stream );
+         if (ferror(stream)) goto errhandler_io;
+      }
+      if (bzerr != BZ_STREAM_END) goto errhandler;
+
+      BZ2_bzReadGetUnused ( &bzerr, bzf, &unusedTmpV, &nUnused );
+      if (bzerr != BZ_OK) panic ( "decompress:bzReadGetUnused" );
+
+      unusedTmp = (UChar*)unusedTmpV;
+      for (i = 0; i < nUnused; i++) unused[i] = unusedTmp[i];
+
+      BZ2_bzReadClose ( &bzerr, bzf );
+      if (bzerr != BZ_OK) panic ( "decompress:bzReadGetUnused" );
+
+      if (nUnused == 0 && myfeof(zStream)) break;
+   }
+
+   closeok:
+   if (ferror(zStream)) goto errhandler_io;
+   if (stream != stdout) {
+      Int32 fd = fileno ( stream );
+      if (fd < 0) goto errhandler_io;
+      applySavedFileAttrToOutputFile ( fd );
+   }
+   ret = fclose ( zStream );
+   if (ret == EOF) goto errhandler_io;
+
+   if (ferror(stream)) goto errhandler_io;
+   ret = fflush ( stream );
+   if (ret != 0) goto errhandler_io;
+   if (stream != stdout) {
+      ret = fclose ( stream );
+      outputHandleJustInCase = NULL;
+      if (ret == EOF) goto errhandler_io;
+   }
+   outputHandleJustInCase = NULL;
+   if (verbosity >= 2) fprintf ( stderr, "\n    " );
+   return True;
+
+   trycat: 
+   if (forceOverwrite) {
+      rewind(zStream);
+      while (True) {
+      	 if (myfeof(zStream)) break;
+      	 nread = fread ( obuf, sizeof(UChar), 5000, zStream );
+      	 if (ferror(zStream)) goto errhandler_io;
+      	 if (nread > 0) fwrite ( obuf, sizeof(UChar), nread, stream );
+      	 if (ferror(stream)) goto errhandler_io;
+      }
+      goto closeok;
+   }
+  
+   errhandler:
+   BZ2_bzReadClose ( &bzerr_dummy, bzf );
+   switch (bzerr) {
+      case BZ_CONFIG_ERROR:
+         configError(); break;
+      case BZ_IO_ERROR:
+         errhandler_io:
+         ioError(); break;
+      case BZ_DATA_ERROR:
+         crcError();
+      case BZ_MEM_ERROR:
+         outOfMemory();
+      case BZ_UNEXPECTED_EOF:
+         compressedStreamEOF();
+      case BZ_DATA_ERROR_MAGIC:
+         if (zStream != stdin) fclose(zStream);
+         if (stream != stdout) fclose(stream);
+         if (streamNo == 1) {
+            return False;
+         } else {
+            if (noisy)
+            fprintf ( stderr, 
+                      "\n%s: %s: trailing garbage after EOF ignored\n",
+                      progName, inName );
+            return True;       
+         }
+      default:
+         panic ( "decompress:unexpected error" );
+   }
+
+   panic ( "decompress:end" );
+   return True; /*notreached*/
+}
+
+
+/*---------------------------------------------*/
+static 
+Bool testStream ( FILE *zStream )
+{
+   BZFILE* bzf = NULL;
+   Int32   bzerr, bzerr_dummy, ret, nread, streamNo, i;
+   UChar   obuf[5000];
+   UChar   unused[BZ_MAX_UNUSED];
+   Int32   nUnused;
+   void*   unusedTmpV;
+   UChar*  unusedTmp;
+
+   nUnused = 0;
+   streamNo = 0;
+
+   SET_BINARY_MODE(zStream);
+   if (ferror(zStream)) goto errhandler_io;
+
+   while (True) {
+
+      bzf = BZ2_bzReadOpen ( 
+               &bzerr, zStream, verbosity, 
+               (int)smallMode, unused, nUnused
+            );
+      if (bzf == NULL || bzerr != BZ_OK) goto errhandler;
+      streamNo++;
+
+      while (bzerr == BZ_OK) {
+         nread = BZ2_bzRead ( &bzerr, bzf, obuf, 5000 );
+         if (bzerr == BZ_DATA_ERROR_MAGIC) goto errhandler;
+      }
+      if (bzerr != BZ_STREAM_END) goto errhandler;
+
+      BZ2_bzReadGetUnused ( &bzerr, bzf, &unusedTmpV, &nUnused );
+      if (bzerr != BZ_OK) panic ( "test:bzReadGetUnused" );
+
+      unusedTmp = (UChar*)unusedTmpV;
+      for (i = 0; i < nUnused; i++) unused[i] = unusedTmp[i];
+
+      BZ2_bzReadClose ( &bzerr, bzf );
+      if (bzerr != BZ_OK) panic ( "test:bzReadGetUnused" );
+      if (nUnused == 0 && myfeof(zStream)) break;
+
+   }
+
+   if (ferror(zStream)) goto errhandler_io;
+   ret = fclose ( zStream );
+   if (ret == EOF) goto errhandler_io;
+
+   if (verbosity >= 2) fprintf ( stderr, "\n    " );
+   return True;
+
+   errhandler:
+   BZ2_bzReadClose ( &bzerr_dummy, bzf );
+   if (verbosity == 0) 
+      fprintf ( stderr, "%s: %s: ", progName, inName );
+   switch (bzerr) {
+      case BZ_CONFIG_ERROR:
+         configError(); break;
+      case BZ_IO_ERROR:
+         errhandler_io:
+         ioError(); break;
+      case BZ_DATA_ERROR:
+         fprintf ( stderr,
+                   "data integrity (CRC) error in data\n" );
+         return False;
+      case BZ_MEM_ERROR:
+         outOfMemory();
+      case BZ_UNEXPECTED_EOF:
+         fprintf ( stderr,
+                   "file ends unexpectedly\n" );
+         return False;
+      case BZ_DATA_ERROR_MAGIC:
+         if (zStream != stdin) fclose(zStream);
+         if (streamNo == 1) {
+          fprintf ( stderr, 
+                    "bad magic number (file not created by bzip2)\n" );
+            return False;
+         } else {
+            if (noisy)
+            fprintf ( stderr, 
+                      "trailing garbage after EOF ignored\n" );
+            return True;       
+         }
+      default:
+         panic ( "test:unexpected error" );
+   }
+
+   panic ( "test:end" );
+   return True; /*notreached*/
+}
+
+
+/*---------------------------------------------------*/
+/*--- Error [non-] handling grunge                ---*/
+/*---------------------------------------------------*/
+
+/*---------------------------------------------*/
+static
+void setExit ( Int32 v )
+{
+   if (v > exitValue) exitValue = v;
+}
+
+
+/*---------------------------------------------*/
+static 
+void cadvise ( void )
+{
+   if (noisy)
+   fprintf (
+      stderr,
+      "\nIt is possible that the compressed file(s) have become corrupted.\n"
+        "You can use the -tvv option to test integrity of such files.\n\n"
+        "You can use the `bzip2recover' program to attempt to recover\n"
+        "data from undamaged sections of corrupted files.\n\n"
+    );
+}
+
+
+/*---------------------------------------------*/
+static 
+void showFileNames ( void )
+{
+   if (noisy)
+   fprintf (
+      stderr,
+      "\tInput file = %s, output file = %s\n",
+      inName, outName 
+   );
+}
+
+
+/*---------------------------------------------*/
+static 
+void cleanUpAndFail ( Int32 ec )
+{
+   IntNative      retVal;
+   struct MY_STAT statBuf;
+
+   if ( srcMode == SM_F2F 
+        && opMode != OM_TEST
+        && deleteOutputOnInterrupt ) {
+
+      /* Check whether input file still exists.  Delete output file
+         only if input exists to avoid loss of data.  Joerg Prante, 5
+         January 2002.  (JRS 06-Jan-2002: other changes in 1.0.2 mean
+         this is less likely to happen.  But to be ultra-paranoid, we
+         do the check anyway.)  */
+      retVal = MY_STAT ( inName, &statBuf );
+      if (retVal == 0) {
+         if (noisy)
+            fprintf ( stderr, 
+                      "%s: Deleting output file %s, if it exists.\n",
+                      progName, outName );
+         if (outputHandleJustInCase != NULL)
+            fclose ( outputHandleJustInCase );
+         retVal = remove ( outName );
+         if (retVal != 0)
+            fprintf ( stderr,
+                      "%s: WARNING: deletion of output file "
+                      "(apparently) failed.\n",
+                      progName );
+      } else {
+         fprintf ( stderr,
+                   "%s: WARNING: deletion of output file suppressed\n",
+                    progName );
+         fprintf ( stderr,
+                   "%s:    since input file no longer exists.  Output file\n",
+                   progName );
+         fprintf ( stderr,
+                   "%s:    `%s' may be incomplete.\n",
+                   progName, outName );
+         fprintf ( stderr, 
+                   "%s:    I suggest doing an integrity test (bzip2 -tv)"
+                   " of it.\n",
+                   progName );
+      }
+   }
+
+   if (noisy && numFileNames > 0 && numFilesProcessed < numFileNames) {
+      fprintf ( stderr, 
+                "%s: WARNING: some files have not been processed:\n"
+                "%s:    %d specified on command line, %d not processed yet.\n\n",
+                progName, progName,
+                numFileNames, numFileNames - numFilesProcessed );
+   }
+   setExit(ec);
+   exit(exitValue);
+}
+
+
+/*---------------------------------------------*/
+static 
+void panic ( const Char* s )
+{
+   fprintf ( stderr,
+             "\n%s: PANIC -- internal consistency error:\n"
+             "\t%s\n"
+             "\tThis is a BUG.  Please report it to me at:\n"
+             "\tjseward@bzip.org\n",
+             progName, s );
+   showFileNames();
+   cleanUpAndFail( 3 );
+}
+
+
+/*---------------------------------------------*/
+static 
+void crcError ( void )
+{
+   fprintf ( stderr,
+             "\n%s: Data integrity error when decompressing.\n",
+             progName );
+   showFileNames();
+   cadvise();
+   cleanUpAndFail( 2 );
+}
+
+
+/*---------------------------------------------*/
+static 
+void compressedStreamEOF ( void )
+{
+  if (noisy) {
+    fprintf ( stderr,
+	      "\n%s: Compressed file ends unexpectedly;\n\t"
+	      "perhaps it is corrupted?  *Possible* reason follows.\n",
+	      progName );
+    perror ( progName );
+    showFileNames();
+    cadvise();
+  }
+  cleanUpAndFail( 2 );
+}
+
+
+/*---------------------------------------------*/
+static 
+void ioError ( void )
+{
+   fprintf ( stderr,
+             "\n%s: I/O or other error, bailing out.  "
+             "Possible reason follows.\n",
+             progName );
+   perror ( progName );
+   showFileNames();
+   cleanUpAndFail( 1 );
+}
+
+
+/*---------------------------------------------*/
+static 
+void mySignalCatcher ( IntNative n )
+{
+   fprintf ( stderr,
+             "\n%s: Control-C or similar caught, quitting.\n",
+             progName );
+   cleanUpAndFail(1);
+}
+
+
+/*---------------------------------------------*/
+static 
+void mySIGSEGVorSIGBUScatcher ( IntNative n )
+{
+   if (opMode == OM_Z)
+      fprintf ( 
+      stderr,
+      "\n%s: Caught a SIGSEGV or SIGBUS whilst compressing.\n"
+      "\n"
+      "   Possible causes are (most likely first):\n"
+      "   (1) This computer has unreliable memory or cache hardware\n"
+      "       (a surprisingly common problem; try a different machine.)\n"
+      "   (2) A bug in the compiler used to create this executable\n"
+      "       (unlikely, if you didn't compile bzip2 yourself.)\n"
+      "   (3) A real bug in bzip2 -- I hope this should never be the case.\n"
+      "   The user's manual, Section 4.3, has more info on (1) and (2).\n"
+      "   \n"
+      "   If you suspect this is a bug in bzip2, or are unsure about (1)\n"
+      "   or (2), feel free to report it to me at: jseward@bzip.org.\n"
+      "   Section 4.3 of the user's manual describes the info a useful\n"
+      "   bug report should have.  If the manual is available on your\n"
+      "   system, please try and read it before mailing me.  If you don't\n"
+      "   have the manual or can't be bothered to read it, mail me anyway.\n"
+      "\n",
+      progName );
+      else
+      fprintf ( 
+      stderr,
+      "\n%s: Caught a SIGSEGV or SIGBUS whilst decompressing.\n"
+      "\n"
+      "   Possible causes are (most likely first):\n"
+      "   (1) The compressed data is corrupted, and bzip2's usual checks\n"
+      "       failed to detect this.  Try bzip2 -tvv my_file.bz2.\n"
+      "   (2) This computer has unreliable memory or cache hardware\n"
+      "       (a surprisingly common problem; try a different machine.)\n"
+      "   (3) A bug in the compiler used to create this executable\n"
+      "       (unlikely, if you didn't compile bzip2 yourself.)\n"
+      "   (4) A real bug in bzip2 -- I hope this should never be the case.\n"
+      "   The user's manual, Section 4.3, has more info on (2) and (3).\n"
+      "   \n"
+      "   If you suspect this is a bug in bzip2, or are unsure about (2)\n"
+      "   or (3), feel free to report it to me at: jseward@bzip.org.\n"
+      "   Section 4.3 of the user's manual describes the info a useful\n"
+      "   bug report should have.  If the manual is available on your\n"
+      "   system, please try and read it before mailing me.  If you don't\n"
+      "   have the manual or can't be bothered to read it, mail me anyway.\n"
+      "\n",
+      progName );
+
+   showFileNames();
+   if (opMode == OM_Z)
+      cleanUpAndFail( 3 ); else
+      { cadvise(); cleanUpAndFail( 2 ); }
+}
+
+
+/*---------------------------------------------*/
+static 
+void outOfMemory ( void )
+{
+   fprintf ( stderr,
+             "\n%s: couldn't allocate enough memory\n",
+             progName );
+   showFileNames();
+   cleanUpAndFail(1);
+}
+
+
+/*---------------------------------------------*/
+static 
+void configError ( void )
+{
+   fprintf ( stderr,
+             "bzip2: I'm not configured correctly for this platform!\n"
+             "\tI require Int32, Int16 and Char to have sizes\n"
+             "\tof 4, 2 and 1 bytes to run properly, and they don't.\n"
+             "\tProbably you can fix this by defining them correctly,\n"
+             "\tand recompiling.  Bye!\n" );
+   setExit(3);
+   exit(exitValue);
+}
+
+
+/*---------------------------------------------------*/
+/*--- The main driver machinery                   ---*/
+/*---------------------------------------------------*/
+
+/* All rather crufty.  The main problem is that input files
+   are stat()d multiple times before use.  This should be
+   cleaned up. 
+*/
+
+/*---------------------------------------------*/
+static 
+void pad ( Char *s )
+{
+   Int32 i;
+   if ( (Int32)strlen(s) >= longestFileName ) return;
+   for (i = 1; i <= longestFileName - (Int32)strlen(s); i++)
+      fprintf ( stderr, " " );
+}
+
+
+/*---------------------------------------------*/
+static 
+void copyFileName ( Char* to, Char* from ) 
+{
+   if ( strlen(from) > FILE_NAME_LEN-10 )  {
+      fprintf (
+         stderr,
+         "bzip2: file name\n`%s'\n"
+         "is suspiciously (more than %d chars) long.\n"
+         "Try using a reasonable file name instead.  Sorry! :-)\n",
+         from, FILE_NAME_LEN-10
+      );
+      setExit(1);
+      exit(exitValue);
+   }
+
+  strncpy(to,from,FILE_NAME_LEN-10);
+  to[FILE_NAME_LEN-10]='\0';
+}
+
+
+/*---------------------------------------------*/
+static 
+Bool fileExists ( Char* name )
+{
+   FILE *tmp   = fopen ( name, "rb" );
+   Bool exists = (tmp != NULL);
+   if (tmp != NULL) fclose ( tmp );
+   return exists;
+}
+
+
+/*---------------------------------------------*/
+/* Open an output file safely with O_EXCL and good permissions.
+   This avoids a race condition in versions < 1.0.2, in which
+   the file was first opened and then had its interim permissions
+   set safely.  We instead use open() to create the file with
+   the interim permissions required. (--- --- rw-).
+
+   For non-Unix platforms, if we are not worrying about
+   security issues, simple this simply behaves like fopen.
+*/
+static
+FILE* fopen_output_safely ( Char* name, const char* mode )
+{
+#  if BZ_UNIX
+   FILE*     fp;
+   IntNative fh;
+   fh = open(name, O_WRONLY|O_CREAT|O_EXCL, S_IWUSR|S_IRUSR);
+   if (fh == -1) return NULL;
+   fp = fdopen(fh, mode);
+   if (fp == NULL) close(fh);
+   return fp;
+#  else
+   return fopen(name, mode);
+#  endif
+}
+
+
+/*---------------------------------------------*/
+/*--
+  if in doubt, return True
+--*/
+static 
+Bool notAStandardFile ( Char* name )
+{
+   IntNative      i;
+   struct MY_STAT statBuf;
+
+   i = MY_LSTAT ( name, &statBuf );
+   if (i != 0) return True;
+   if (MY_S_ISREG(statBuf.st_mode)) return False;
+   return True;
+}
+
+
+/*---------------------------------------------*/
+/*--
+  rac 11/21/98 see if file has hard links to it
+--*/
+static 
+Int32 countHardLinks ( Char* name )
+{  
+   IntNative      i;
+   struct MY_STAT statBuf;
+
+   i = MY_LSTAT ( name, &statBuf );
+   if (i != 0) return 0;
+   return (statBuf.st_nlink - 1);
+}
+
+
+/*---------------------------------------------*/
+/* Copy modification date, access date, permissions and owner from the
+   source to destination file.  We have to copy this meta-info off
+   into fileMetaInfo before starting to compress / decompress it,
+   because doing it afterwards means we get the wrong access time.
+
+   To complicate matters, in compress() and decompress() below, the
+   sequence of tests preceding the call to saveInputFileMetaInfo()
+   involves calling fileExists(), which in turn establishes its result
+   by attempting to fopen() the file, and if successful, immediately
+   fclose()ing it again.  So we have to assume that the fopen() call
+   does not cause the access time field to be updated.
+
+   Reading of the man page for stat() (man 2 stat) on RedHat 7.2 seems
+   to imply that merely doing open() will not affect the access time.
+   Therefore we merely need to hope that the C library only does
+   open() as a result of fopen(), and not any kind of read()-ahead
+   cleverness.
+
+   It sounds pretty fragile to me.  Whether this carries across
+   robustly to arbitrary Unix-like platforms (or even works robustly
+   on this one, RedHat 7.2) is unknown to me.  Nevertheless ...  
+*/
+#if BZ_UNIX
+static 
+struct MY_STAT fileMetaInfo;
+#endif
+
+static 
+void saveInputFileMetaInfo ( Char *srcName )
+{
+#  if BZ_UNIX
+   IntNative retVal;
+   /* Note use of stat here, not lstat. */
+   retVal = MY_STAT( srcName, &fileMetaInfo );
+   ERROR_IF_NOT_ZERO ( retVal );
+#  endif
+}
+
+
+static 
+void applySavedTimeInfoToOutputFile ( Char *dstName )
+{
+#  if BZ_UNIX
+   IntNative      retVal;
+   struct utimbuf uTimBuf;
+
+   uTimBuf.actime = fileMetaInfo.st_atime;
+   uTimBuf.modtime = fileMetaInfo.st_mtime;
+
+   retVal = utime ( dstName, &uTimBuf );
+   ERROR_IF_NOT_ZERO ( retVal );
+#  endif
+}
+
+static 
+void applySavedFileAttrToOutputFile ( IntNative fd )
+{
+#  if BZ_UNIX
+   IntNative retVal;
+
+   retVal = fchmod ( fd, fileMetaInfo.st_mode );
+   ERROR_IF_NOT_ZERO ( retVal );
+
+   (void) fchown ( fd, fileMetaInfo.st_uid, fileMetaInfo.st_gid );
+   /* chown() will in many cases return with EPERM, which can
+      be safely ignored.
+   */
+#  endif
+}
+
+
+/*---------------------------------------------*/
+static 
+Bool containsDubiousChars ( Char* name )
+{
+#  if BZ_UNIX
+   /* On unix, files can contain any characters and the file expansion
+    * is performed by the shell.
+    */
+   return False;
+#  else /* ! BZ_UNIX */
+   /* On non-unix (Win* platforms), wildcard characters are not allowed in 
+    * filenames.
+    */
+   for (; *name != '\0'; name++)
+      if (*name == '?' || *name == '*') return True;
+   return False;
+#  endif /* BZ_UNIX */
+}
+
+
+/*---------------------------------------------*/
+#define BZ_N_SUFFIX_PAIRS 4
+
+const Char* zSuffix[BZ_N_SUFFIX_PAIRS] 
+   = { ".bz2", ".bz", ".tbz2", ".tbz" };
+const Char* unzSuffix[BZ_N_SUFFIX_PAIRS] 
+   = { "", "", ".tar", ".tar" };
+
+static 
+Bool hasSuffix ( Char* s, const Char* suffix )
+{
+   Int32 ns = strlen(s);
+   Int32 nx = strlen(suffix);
+   if (ns < nx) return False;
+   if (strcmp(s + ns - nx, suffix) == 0) return True;
+   return False;
+}
+
+static 
+Bool mapSuffix ( Char* name, 
+                 const Char* oldSuffix, 
+                 const Char* newSuffix )
+{
+   if (!hasSuffix(name,oldSuffix)) return False;
+   name[strlen(name)-strlen(oldSuffix)] = 0;
+   strcat ( name, newSuffix );
+   return True;
+}
+
+
+/*---------------------------------------------*/
+static 
+void compress ( Char *name )
+{
+   FILE  *inStr;
+   FILE  *outStr;
+   Int32 n, i;
+   struct MY_STAT statBuf;
+
+   deleteOutputOnInterrupt = False;
+
+   if (name == NULL && srcMode != SM_I2O)
+      panic ( "compress: bad modes\n" );
+
+   switch (srcMode) {
+      case SM_I2O: 
+         copyFileName ( inName, (Char*)"(stdin)" );
+         copyFileName ( outName, (Char*)"(stdout)" ); 
+         break;
+      case SM_F2F: 
+         copyFileName ( inName, name );
+         copyFileName ( outName, name );
+         strcat ( outName, ".bz2" ); 
+         break;
+      case SM_F2O: 
+         copyFileName ( inName, name );
+         copyFileName ( outName, (Char*)"(stdout)" ); 
+         break;
+   }
+
+   if ( srcMode != SM_I2O && containsDubiousChars ( inName ) ) {
+      if (noisy)
+      fprintf ( stderr, "%s: There are no files matching `%s'.\n",
+                progName, inName );
+      setExit(1);
+      return;
+   }
+   if ( srcMode != SM_I2O && !fileExists ( inName ) ) {
+      fprintf ( stderr, "%s: Can't open input file %s: %s.\n",
+                progName, inName, strerror(errno) );
+      setExit(1);
+      return;
+   }
+   for (i = 0; i < BZ_N_SUFFIX_PAIRS; i++) {
+      if (hasSuffix(inName, zSuffix[i])) {
+         if (noisy)
+         fprintf ( stderr, 
+                   "%s: Input file %s already has %s suffix.\n",
+                   progName, inName, zSuffix[i] );
+         setExit(1);
+         return;
+      }
+   }
+   if ( srcMode == SM_F2F || srcMode == SM_F2O ) {
+      MY_STAT(inName, &statBuf);
+      if ( MY_S_ISDIR(statBuf.st_mode) ) {
+         fprintf( stderr,
+                  "%s: Input file %s is a directory.\n",
+                  progName,inName);
+         setExit(1);
+         return;
+      }
+   }
+   if ( srcMode == SM_F2F && !forceOverwrite && notAStandardFile ( inName )) {
+      if (noisy)
+      fprintf ( stderr, "%s: Input file %s is not a normal file.\n",
+                progName, inName );
+      setExit(1);
+      return;
+   }
+   if ( srcMode == SM_F2F && fileExists ( outName ) ) {
+      if (forceOverwrite) {
+	 remove(outName);
+      } else {
+	 fprintf ( stderr, "%s: Output file %s already exists.\n",
+		   progName, outName );
+	 setExit(1);
+	 return;
+      }
+   }
+   if ( srcMode == SM_F2F && !forceOverwrite &&
+        (n=countHardLinks ( inName )) > 0) {
+      fprintf ( stderr, "%s: Input file %s has %d other link%s.\n",
+                progName, inName, n, n > 1 ? "s" : "" );
+      setExit(1);
+      return;
+   }
+
+   if ( srcMode == SM_F2F ) {
+      /* Save the file's meta-info before we open it.  Doing it later
+         means we mess up the access times. */
+      saveInputFileMetaInfo ( inName );
+   }
+
+   switch ( srcMode ) {
+
+      case SM_I2O:
+         inStr = stdin;
+         outStr = stdout;
+         if ( isatty ( fileno ( stdout ) ) ) {
+            fprintf ( stderr,
+                      "%s: I won't write compressed data to a terminal.\n",
+                      progName );
+            fprintf ( stderr, "%s: For help, type: `%s --help'.\n",
+                              progName, progName );
+            setExit(1);
+            return;
+         };
+         break;
+
+      case SM_F2O:
+         inStr = fopen ( inName, "rb" );
+         outStr = stdout;
+         if ( isatty ( fileno ( stdout ) ) ) {
+            fprintf ( stderr,
+                      "%s: I won't write compressed data to a terminal.\n",
+                      progName );
+            fprintf ( stderr, "%s: For help, type: `%s --help'.\n",
+                              progName, progName );
+            if ( inStr != NULL ) fclose ( inStr );
+            setExit(1);
+            return;
+         };
+         if ( inStr == NULL ) {
+            fprintf ( stderr, "%s: Can't open input file %s: %s.\n",
+                      progName, inName, strerror(errno) );
+            setExit(1);
+            return;
+         };
+         break;
+
+      case SM_F2F:
+         inStr = fopen ( inName, "rb" );
+         outStr = fopen_output_safely ( outName, "wb" );
+         if ( outStr == NULL) {
+            fprintf ( stderr, "%s: Can't create output file %s: %s.\n",
+                      progName, outName, strerror(errno) );
+            if ( inStr != NULL ) fclose ( inStr );
+            setExit(1);
+            return;
+         }
+         if ( inStr == NULL ) {
+            fprintf ( stderr, "%s: Can't open input file %s: %s.\n",
+                      progName, inName, strerror(errno) );
+            if ( outStr != NULL ) fclose ( outStr );
+            setExit(1);
+            return;
+         };
+         break;
+
+      default:
+         panic ( "compress: bad srcMode" );
+         break;
+   }
+
+   if (verbosity >= 1) {
+      fprintf ( stderr,  "  %s: ", inName );
+      pad ( inName );
+      fflush ( stderr );
+   }
+
+   /*--- Now the input and output handles are sane.  Do the Biz. ---*/
+   outputHandleJustInCase = outStr;
+   deleteOutputOnInterrupt = True;
+   compressStream ( inStr, outStr );
+   outputHandleJustInCase = NULL;
+
+   /*--- If there was an I/O error, we won't get here. ---*/
+   if ( srcMode == SM_F2F ) {
+      applySavedTimeInfoToOutputFile ( outName );
+      deleteOutputOnInterrupt = False;
+      if ( !keepInputFiles ) {
+         IntNative retVal = remove ( inName );
+         ERROR_IF_NOT_ZERO ( retVal );
+      }
+   }
+
+   deleteOutputOnInterrupt = False;
+}
+
+
+/*---------------------------------------------*/
+static 
+void uncompress ( Char *name )
+{
+   FILE  *inStr;
+   FILE  *outStr;
+   Int32 n, i;
+   Bool  magicNumberOK;
+   Bool  cantGuess;
+   struct MY_STAT statBuf;
+
+   deleteOutputOnInterrupt = False;
+
+   if (name == NULL && srcMode != SM_I2O)
+      panic ( "uncompress: bad modes\n" );
+
+   cantGuess = False;
+   switch (srcMode) {
+      case SM_I2O: 
+         copyFileName ( inName, (Char*)"(stdin)" );
+         copyFileName ( outName, (Char*)"(stdout)" ); 
+         break;
+      case SM_F2F: 
+         copyFileName ( inName, name );
+         copyFileName ( outName, name );
+         for (i = 0; i < BZ_N_SUFFIX_PAIRS; i++)
+            if (mapSuffix(outName,zSuffix[i],unzSuffix[i]))
+               goto zzz; 
+         cantGuess = True;
+         strcat ( outName, ".out" );
+         break;
+      case SM_F2O: 
+         copyFileName ( inName, name );
+         copyFileName ( outName, (Char*)"(stdout)" ); 
+         break;
+   }
+
+   zzz:
+   if ( srcMode != SM_I2O && containsDubiousChars ( inName ) ) {
+      if (noisy)
+      fprintf ( stderr, "%s: There are no files matching `%s'.\n",
+                progName, inName );
+      setExit(1);
+      return;
+   }
+   if ( srcMode != SM_I2O && !fileExists ( inName ) ) {
+      fprintf ( stderr, "%s: Can't open input file %s: %s.\n",
+                progName, inName, strerror(errno) );
+      setExit(1);
+      return;
+   }
+   if ( srcMode == SM_F2F || srcMode == SM_F2O ) {
+      MY_STAT(inName, &statBuf);
+      if ( MY_S_ISDIR(statBuf.st_mode) ) {
+         fprintf( stderr,
+                  "%s: Input file %s is a directory.\n",
+                  progName,inName);
+         setExit(1);
+         return;
+      }
+   }
+   if ( srcMode == SM_F2F && !forceOverwrite && notAStandardFile ( inName )) {
+      if (noisy)
+      fprintf ( stderr, "%s: Input file %s is not a normal file.\n",
+                progName, inName );
+      setExit(1);
+      return;
+   }
+   if ( /* srcMode == SM_F2F implied && */ cantGuess ) {
+      if (noisy)
+      fprintf ( stderr, 
+                "%s: Can't guess original name for %s -- using %s\n",
+                progName, inName, outName );
+      /* just a warning, no return */
+   }   
+   if ( srcMode == SM_F2F && fileExists ( outName ) ) {
+      if (forceOverwrite) {
+	remove(outName);
+      } else {
+        fprintf ( stderr, "%s: Output file %s already exists.\n",
+                  progName, outName );
+        setExit(1);
+        return;
+      }
+   }
+   if ( srcMode == SM_F2F && !forceOverwrite &&
+        (n=countHardLinks ( inName ) ) > 0) {
+      fprintf ( stderr, "%s: Input file %s has %d other link%s.\n",
+                progName, inName, n, n > 1 ? "s" : "" );
+      setExit(1);
+      return;
+   }
+
+   if ( srcMode == SM_F2F ) {
+      /* Save the file's meta-info before we open it.  Doing it later
+         means we mess up the access times. */
+      saveInputFileMetaInfo ( inName );
+   }
+
+   switch ( srcMode ) {
+
+      case SM_I2O:
+         inStr = stdin;
+         outStr = stdout;
+         if ( isatty ( fileno ( stdin ) ) ) {
+            fprintf ( stderr,
+                      "%s: I won't read compressed data from a terminal.\n",
+                      progName );
+            fprintf ( stderr, "%s: For help, type: `%s --help'.\n",
+                              progName, progName );
+            setExit(1);
+            return;
+         };
+         break;
+
+      case SM_F2O:
+         inStr = fopen ( inName, "rb" );
+         outStr = stdout;
+         if ( inStr == NULL ) {
+            fprintf ( stderr, "%s: Can't open input file %s:%s.\n",
+                      progName, inName, strerror(errno) );
+            if ( inStr != NULL ) fclose ( inStr );
+            setExit(1);
+            return;
+         };
+         break;
+
+      case SM_F2F:
+         inStr = fopen ( inName, "rb" );
+         outStr = fopen_output_safely ( outName, "wb" );
+         if ( outStr == NULL) {
+            fprintf ( stderr, "%s: Can't create output file %s: %s.\n",
+                      progName, outName, strerror(errno) );
+            if ( inStr != NULL ) fclose ( inStr );
+            setExit(1);
+            return;
+         }
+         if ( inStr == NULL ) {
+            fprintf ( stderr, "%s: Can't open input file %s: %s.\n",
+                      progName, inName, strerror(errno) );
+            if ( outStr != NULL ) fclose ( outStr );
+            setExit(1);
+            return;
+         };
+         break;
+
+      default:
+         panic ( "uncompress: bad srcMode" );
+         break;
+   }
+
+   if (verbosity >= 1) {
+      fprintf ( stderr, "  %s: ", inName );
+      pad ( inName );
+      fflush ( stderr );
+   }
+
+   /*--- Now the input and output handles are sane.  Do the Biz. ---*/
+   outputHandleJustInCase = outStr;
+   deleteOutputOnInterrupt = True;
+   magicNumberOK = uncompressStream ( inStr, outStr );
+   outputHandleJustInCase = NULL;
+
+   /*--- If there was an I/O error, we won't get here. ---*/
+   if ( magicNumberOK ) {
+      if ( srcMode == SM_F2F ) {
+         applySavedTimeInfoToOutputFile ( outName );
+         deleteOutputOnInterrupt = False;
+         if ( !keepInputFiles ) {
+            IntNative retVal = remove ( inName );
+            ERROR_IF_NOT_ZERO ( retVal );
+         }
+      }
+   } else {
+      unzFailsExist = True;
+      deleteOutputOnInterrupt = False;
+      if ( srcMode == SM_F2F ) {
+         IntNative retVal = remove ( outName );
+         ERROR_IF_NOT_ZERO ( retVal );
+      }
+   }
+   deleteOutputOnInterrupt = False;
+
+   if ( magicNumberOK ) {
+      if (verbosity >= 1)
+         fprintf ( stderr, "done\n" );
+   } else {
+      setExit(2);
+      if (verbosity >= 1)
+         fprintf ( stderr, "not a bzip2 file.\n" ); else
+         fprintf ( stderr,
+                   "%s: %s is not a bzip2 file.\n",
+                   progName, inName );
+   }
+
+}
+
+
+/*---------------------------------------------*/
+static 
+void testf ( Char *name )
+{
+   FILE *inStr;
+   Bool allOK;
+   struct MY_STAT statBuf;
+
+   deleteOutputOnInterrupt = False;
+
+   if (name == NULL && srcMode != SM_I2O)
+      panic ( "testf: bad modes\n" );
+
+   copyFileName ( outName, (Char*)"(none)" );
+   switch (srcMode) {
+      case SM_I2O: copyFileName ( inName, (Char*)"(stdin)" ); break;
+      case SM_F2F: copyFileName ( inName, name ); break;
+      case SM_F2O: copyFileName ( inName, name ); break;
+   }
+
+   if ( srcMode != SM_I2O && containsDubiousChars ( inName ) ) {
+      if (noisy)
+      fprintf ( stderr, "%s: There are no files matching `%s'.\n",
+                progName, inName );
+      setExit(1);
+      return;
+   }
+   if ( srcMode != SM_I2O && !fileExists ( inName ) ) {
+      fprintf ( stderr, "%s: Can't open input %s: %s.\n",
+                progName, inName, strerror(errno) );
+      setExit(1);
+      return;
+   }
+   if ( srcMode != SM_I2O ) {
+      MY_STAT(inName, &statBuf);
+      if ( MY_S_ISDIR(statBuf.st_mode) ) {
+         fprintf( stderr,
+                  "%s: Input file %s is a directory.\n",
+                  progName,inName);
+         setExit(1);
+         return;
+      }
+   }
+
+   switch ( srcMode ) {
+
+      case SM_I2O:
+         if ( isatty ( fileno ( stdin ) ) ) {
+            fprintf ( stderr,
+                      "%s: I won't read compressed data from a terminal.\n",
+                      progName );
+            fprintf ( stderr, "%s: For help, type: `%s --help'.\n",
+                              progName, progName );
+            setExit(1);
+            return;
+         };
+         inStr = stdin;
+         break;
+
+      case SM_F2O: case SM_F2F:
+         inStr = fopen ( inName, "rb" );
+         if ( inStr == NULL ) {
+            fprintf ( stderr, "%s: Can't open input file %s:%s.\n",
+                      progName, inName, strerror(errno) );
+            setExit(1);
+            return;
+         };
+         break;
+
+      default:
+         panic ( "testf: bad srcMode" );
+         break;
+   }
+
+   if (verbosity >= 1) {
+      fprintf ( stderr, "  %s: ", inName );
+      pad ( inName );
+      fflush ( stderr );
+   }
+
+   /*--- Now the input handle is sane.  Do the Biz. ---*/
+   outputHandleJustInCase = NULL;
+   allOK = testStream ( inStr );
+
+   if (allOK && verbosity >= 1) fprintf ( stderr, "ok\n" );
+   if (!allOK) testFailsExist = True;
+}
+
+
+/*---------------------------------------------*/
+static 
+void license ( void )
+{
+   fprintf ( stderr,
+
+    "bzip2, a block-sorting file compressor.  "
+    "Version %s.\n"
+    "   \n"
+    "   Copyright (C) 1996-2007 by Julian Seward.\n"
+    "   \n"
+    "   This program is free software; you can redistribute it and/or modify\n"
+    "   it under the terms set out in the LICENSE file, which is included\n"
+    "   in the bzip2-1.0.5 source distribution.\n"
+    "   \n"
+    "   This program is distributed in the hope that it will be useful,\n"
+    "   but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+    "   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
+    "   LICENSE file for more details.\n"
+    "   \n",
+    BZ2_bzlibVersion()
+   );
+}
+
+
+/*---------------------------------------------*/
+static 
+void usage ( Char *fullProgName )
+{
+   fprintf (
+      stderr,
+      "bzip2, a block-sorting file compressor.  "
+      "Version %s.\n"
+      "\n   usage: %s [flags and input files in any order]\n"
+      "\n"
+      "   -h --help           print this message\n"
+      "   -d --decompress     force decompression\n"
+      "   -z --compress       force compression\n"
+      "   -k --keep           keep (don't delete) input files\n"
+      "   -f --force          overwrite existing output files\n"
+      "   -t --test           test compressed file integrity\n"
+      "   -c --stdout         output to standard out\n"
+      "   -q --quiet          suppress noncritical error messages\n"
+      "   -v --verbose        be verbose (a 2nd -v gives more)\n"
+      "   -L --license        display software version & license\n"
+      "   -V --version        display software version & license\n"
+      "   -s --small          use less memory (at most 2500k)\n"
+      "   -1 .. -9            set block size to 100k .. 900k\n"
+      "   --fast              alias for -1\n"
+      "   --best              alias for -9\n"
+      "\n"
+      "   If invoked as `bzip2', default action is to compress.\n"
+      "              as `bunzip2',  default action is to decompress.\n"
+      "              as `bzcat', default action is to decompress to stdout.\n"
+      "\n"
+      "   If no file names are given, bzip2 compresses or decompresses\n"
+      "   from standard input to standard output.  You can combine\n"
+      "   short flags, so `-v -4' means the same as -v4 or -4v, &c.\n"
+#     if BZ_UNIX
+      "\n"
+#     endif
+      ,
+
+      BZ2_bzlibVersion(),
+      fullProgName
+   );
+}
+
+
+/*---------------------------------------------*/
+static 
+void redundant ( Char* flag )
+{
+   fprintf ( 
+      stderr, 
+      "%s: %s is redundant in versions 0.9.5 and above\n",
+      progName, flag );
+}
+
+
+/*---------------------------------------------*/
+/*--
+  All the garbage from here to main() is purely to
+  implement a linked list of command-line arguments,
+  into which main() copies argv[1 .. argc-1].
+
+  The purpose of this exercise is to facilitate 
+  the expansion of wildcard characters * and ? in 
+  filenames for OSs which don't know how to do it
+  themselves, like MSDOS, Windows 95 and NT.
+
+  The actual Dirty Work is done by the platform-
+  specific macro APPEND_FILESPEC.
+--*/
+
+typedef
+   struct zzzz {
+      Char        *name;
+      struct zzzz *link;
+   }
+   Cell;
+
+
+/*---------------------------------------------*/
+static 
+void *myMalloc ( Int32 n )
+{
+   void* p;
+
+   p = malloc ( (size_t)n );
+   if (p == NULL) outOfMemory ();
+   return p;
+}
+
+
+/*---------------------------------------------*/
+static 
+Cell *mkCell ( void )
+{
+   Cell *c;
+
+   c = (Cell*) myMalloc ( sizeof ( Cell ) );
+   c->name = NULL;
+   c->link = NULL;
+   return c;
+}
+
+
+/*---------------------------------------------*/
+static 
+Cell *snocString ( Cell *root, Char *name )
+{
+   if (root == NULL) {
+      Cell *tmp = mkCell();
+      tmp->name = (Char*) myMalloc ( 5 + strlen(name) );
+      strcpy ( tmp->name, name );
+      return tmp;
+   } else {
+      Cell *tmp = root;
+      while (tmp->link != NULL) tmp = tmp->link;
+      tmp->link = snocString ( tmp->link, name );
+      return root;
+   }
+}
+
+
+/*---------------------------------------------*/
+static 
+void addFlagsFromEnvVar ( Cell** argList, Char* varName ) 
+{
+   Int32 i, j, k;
+   Char *envbase, *p;
+
+   envbase = getenv(varName);
+   if (envbase != NULL) {
+      p = envbase;
+      i = 0;
+      while (True) {
+         if (p[i] == 0) break;
+         p += i;
+         i = 0;
+         while (isspace((Int32)(p[0]))) p++;
+         while (p[i] != 0 && !isspace((Int32)(p[i]))) i++;
+         if (i > 0) {
+            k = i; if (k > FILE_NAME_LEN-10) k = FILE_NAME_LEN-10;
+            for (j = 0; j < k; j++) tmpName[j] = p[j];
+            tmpName[k] = 0;
+            APPEND_FLAG(*argList, tmpName);
+         }
+      }
+   }
+}
+
+
+/*---------------------------------------------*/
+#define ISFLAG(s) (strcmp(aa->name, (s))==0)
+
+IntNative main ( IntNative argc, Char *argv[] )
+{
+   Int32  i, j;
+   Char   *tmp;
+   Cell   *argList;
+   Cell   *aa;
+   Bool   decode;
+
+   /*-- Be really really really paranoid :-) --*/
+   if (sizeof(Int32) != 4 || sizeof(UInt32) != 4  ||
+       sizeof(Int16) != 2 || sizeof(UInt16) != 2  ||
+       sizeof(Char)  != 1 || sizeof(UChar)  != 1)
+      configError();
+
+   /*-- Initialise --*/
+   outputHandleJustInCase  = NULL;
+   smallMode               = False;
+   keepInputFiles          = False;
+   forceOverwrite          = False;
+   noisy                   = True;
+   verbosity               = 0;
+   blockSize100k           = 9;
+   testFailsExist          = False;
+   unzFailsExist           = False;
+   numFileNames            = 0;
+   numFilesProcessed       = 0;
+   workFactor              = 30;
+   deleteOutputOnInterrupt = False;
+   exitValue               = 0;
+   i = j = 0; /* avoid bogus warning from egcs-1.1.X */
+
+   /*-- Set up signal handlers for mem access errors --*/
+   signal (SIGSEGV, mySIGSEGVorSIGBUScatcher);
+#  if BZ_UNIX
+#  ifndef __DJGPP__
+   signal (SIGBUS,  mySIGSEGVorSIGBUScatcher);
+#  endif
+#  endif
+
+   copyFileName ( inName,  (Char*)"(none)" );
+   copyFileName ( outName, (Char*)"(none)" );
+
+   copyFileName ( progNameReally, argv[0] );
+   progName = &progNameReally[0];
+   for (tmp = &progNameReally[0]; *tmp != '\0'; tmp++)
+      if (*tmp == PATH_SEP) progName = tmp + 1;
+
+
+   /*-- Copy flags from env var BZIP2, and 
+        expand filename wildcards in arg list.
+   --*/
+   argList = NULL;
+   addFlagsFromEnvVar ( &argList,  (Char*)"BZIP2" );
+   addFlagsFromEnvVar ( &argList,  (Char*)"BZIP" );
+   for (i = 1; i <= argc-1; i++)
+      APPEND_FILESPEC(argList, argv[i]);
+
+
+   /*-- Find the length of the longest filename --*/
+   longestFileName = 7;
+   numFileNames    = 0;
+   decode          = True;
+   for (aa = argList; aa != NULL; aa = aa->link) {
+      if (ISFLAG("--")) { decode = False; continue; }
+      if (aa->name[0] == '-' && decode) continue;
+      numFileNames++;
+      if (longestFileName < (Int32)strlen(aa->name) )
+         longestFileName = (Int32)strlen(aa->name);
+   }
+
+
+   /*-- Determine source modes; flag handling may change this too. --*/
+   if (numFileNames == 0)
+      srcMode = SM_I2O; else srcMode = SM_F2F;
+
+
+   /*-- Determine what to do (compress/uncompress/test/cat). --*/
+   /*-- Note that subsequent flag handling may change this. --*/
+   opMode = OM_Z;
+
+   if ( (strstr ( progName, "unzip" ) != 0) ||
+        (strstr ( progName, "UNZIP" ) != 0) )
+      opMode = OM_UNZ;
+
+   if ( (strstr ( progName, "z2cat" ) != 0) ||
+        (strstr ( progName, "Z2CAT" ) != 0) ||
+        (strstr ( progName, "zcat" ) != 0)  ||
+        (strstr ( progName, "ZCAT" ) != 0) )  {
+      opMode = OM_UNZ;
+      srcMode = (numFileNames == 0) ? SM_I2O : SM_F2O;
+   }
+
+
+   /*-- Look at the flags. --*/
+   for (aa = argList; aa != NULL; aa = aa->link) {
+      if (ISFLAG("--")) break;
+      if (aa->name[0] == '-' && aa->name[1] != '-') {
+         for (j = 1; aa->name[j] != '\0'; j++) {
+            switch (aa->name[j]) {
+               case 'c': srcMode          = SM_F2O; break;
+               case 'd': opMode           = OM_UNZ; break;
+               case 'z': opMode           = OM_Z; break;
+               case 'f': forceOverwrite   = True; break;
+               case 't': opMode           = OM_TEST; break;
+               case 'k': keepInputFiles   = True; break;
+               case 's': smallMode        = True; break;
+               case 'q': noisy            = False; break;
+               case '1': blockSize100k    = 1; break;
+               case '2': blockSize100k    = 2; break;
+               case '3': blockSize100k    = 3; break;
+               case '4': blockSize100k    = 4; break;
+               case '5': blockSize100k    = 5; break;
+               case '6': blockSize100k    = 6; break;
+               case '7': blockSize100k    = 7; break;
+               case '8': blockSize100k    = 8; break;
+               case '9': blockSize100k    = 9; break;
+               case 'V':
+               case 'L': license();            break;
+               case 'v': verbosity++; break;
+               case 'h': usage ( progName );
+                         exit ( 0 );
+                         break;
+               default:  fprintf ( stderr, "%s: Bad flag `%s'\n",
+                                   progName, aa->name );
+                         usage ( progName );
+                         exit ( 1 );
+                         break;
+            }
+         }
+      }
+   }
+   
+   /*-- And again ... --*/
+   for (aa = argList; aa != NULL; aa = aa->link) {
+      if (ISFLAG("--")) break;
+      if (ISFLAG("--stdout"))            srcMode          = SM_F2O;  else
+      if (ISFLAG("--decompress"))        opMode           = OM_UNZ;  else
+      if (ISFLAG("--compress"))          opMode           = OM_Z;    else
+      if (ISFLAG("--force"))             forceOverwrite   = True;    else
+      if (ISFLAG("--test"))              opMode           = OM_TEST; else
+      if (ISFLAG("--keep"))              keepInputFiles   = True;    else
+      if (ISFLAG("--small"))             smallMode        = True;    else
+      if (ISFLAG("--quiet"))             noisy            = False;   else
+      if (ISFLAG("--version"))           license();                  else
+      if (ISFLAG("--license"))           license();                  else
+      if (ISFLAG("--exponential"))       workFactor = 1;             else 
+      if (ISFLAG("--repetitive-best"))   redundant(aa->name);        else
+      if (ISFLAG("--repetitive-fast"))   redundant(aa->name);        else
+      if (ISFLAG("--fast"))              blockSize100k = 1;          else
+      if (ISFLAG("--best"))              blockSize100k = 9;          else
+      if (ISFLAG("--verbose"))           verbosity++;                else
+      if (ISFLAG("--help"))              { usage ( progName ); exit ( 0 ); }
+         else
+         if (strncmp ( aa->name, "--", 2) == 0) {
+            fprintf ( stderr, "%s: Bad flag `%s'\n", progName, aa->name );
+            usage ( progName );
+            exit ( 1 );
+         }
+   }
+
+   if (verbosity > 4) verbosity = 4;
+   if (opMode == OM_Z && smallMode && blockSize100k > 2) 
+      blockSize100k = 2;
+
+   if (opMode == OM_TEST && srcMode == SM_F2O) {
+      fprintf ( stderr, "%s: -c and -t cannot be used together.\n",
+                progName );
+      exit ( 1 );
+   }
+
+   if (srcMode == SM_F2O && numFileNames == 0)
+      srcMode = SM_I2O;
+
+   if (opMode != OM_Z) blockSize100k = 0;
+
+   if (srcMode == SM_F2F) {
+      signal (SIGINT,  mySignalCatcher);
+      signal (SIGTERM, mySignalCatcher);
+#     if BZ_UNIX
+      signal (SIGHUP,  mySignalCatcher);
+#     endif
+   }
+
+   if (opMode == OM_Z) {
+     if (srcMode == SM_I2O) {
+        compress ( NULL );
+     } else {
+        decode = True;
+        for (aa = argList; aa != NULL; aa = aa->link) {
+           if (ISFLAG("--")) { decode = False; continue; }
+           if (aa->name[0] == '-' && decode) continue;
+           numFilesProcessed++;
+           compress ( aa->name );
+        }
+     }
+   } 
+   else
+
+   if (opMode == OM_UNZ) {
+      unzFailsExist = False;
+      if (srcMode == SM_I2O) {
+         uncompress ( NULL );
+      } else {
+         decode = True;
+         for (aa = argList; aa != NULL; aa = aa->link) {
+            if (ISFLAG("--")) { decode = False; continue; }
+            if (aa->name[0] == '-' && decode) continue;
+            numFilesProcessed++;
+            uncompress ( aa->name );
+         }      
+      }
+      if (unzFailsExist) { 
+         setExit(2); 
+         exit(exitValue);
+      }
+   } 
+
+   else {
+      testFailsExist = False;
+      if (srcMode == SM_I2O) {
+         testf ( NULL );
+      } else {
+         decode = True;
+         for (aa = argList; aa != NULL; aa = aa->link) {
+	    if (ISFLAG("--")) { decode = False; continue; }
+            if (aa->name[0] == '-' && decode) continue;
+            numFilesProcessed++;
+            testf ( aa->name );
+	 }
+      }
+      if (testFailsExist && noisy) {
+         fprintf ( stderr,
+           "\n"
+           "You can use the `bzip2recover' program to attempt to recover\n"
+           "data from undamaged sections of corrupted files.\n\n"
+         );
+         setExit(2);
+         exit(exitValue);
+      }
+   }
+
+   /* Free the argument list memory to mollify leak detectors 
+      (eg) Purify, Checker.  Serves no other useful purpose.
+   */
+   aa = argList;
+   while (aa != NULL) {
+      Cell* aa2 = aa->link;
+      if (aa->name != NULL) free(aa->name);
+      free(aa);
+      aa = aa2;
+   }
+
+   return exitValue;
+}
+
+
+/*-----------------------------------------------------------*/
+/*--- end                                         bzip2.c ---*/
+/*-----------------------------------------------------------*/
diff --git a/Utilities/cmbzip2/bzip2recover.c b/Utilities/cmbzip2/bzip2recover.c
new file mode 100644
index 0000000000..5f6d621809
--- /dev/null
+++ b/Utilities/cmbzip2/bzip2recover.c
@@ -0,0 +1,514 @@
+/*-----------------------------------------------------------*/
+/*--- Block recoverer program for bzip2                   ---*/
+/*---                                      bzip2recover.c ---*/
+/*-----------------------------------------------------------*/
+
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
+
+   bzip2/libbzip2 version 1.0.5 of 10 December 2007
+   Copyright (C) 1996-2007 Julian Seward <jseward@bzip.org>
+
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
+
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
+
+/* This program is a complete hack and should be rewritten properly.
+	 It isn't very complicated. */
+
+#include <stdio.h>
+#include <errno.h>
+#include <stdlib.h>
+#include <string.h>
+
+
+/* This program records bit locations in the file to be recovered.
+   That means that if 64-bit ints are not supported, we will not
+   be able to recover .bz2 files over 512MB (2^32 bits) long.
+   On GNU supported platforms, we take advantage of the 64-bit
+   int support to circumvent this problem.  Ditto MSVC.
+
+   This change occurred in version 1.0.2; all prior versions have
+   the 512MB limitation.
+*/
+#ifdef __GNUC__
+   typedef  unsigned long long int  MaybeUInt64;
+#  define MaybeUInt64_FMT "%Lu"
+#else
+#ifdef _MSC_VER
+   typedef  unsigned __int64  MaybeUInt64;
+#  define MaybeUInt64_FMT "%I64u"
+#else
+   typedef  unsigned int   MaybeUInt64;
+#  define MaybeUInt64_FMT "%u"
+#endif
+#endif
+
+typedef  unsigned int   UInt32;
+typedef  int            Int32;
+typedef  unsigned char  UChar;
+typedef  char           Char;
+typedef  unsigned char  Bool;
+#define True    ((Bool)1)
+#define False   ((Bool)0)
+
+
+#define BZ_MAX_FILENAME 2000
+
+Char inFileName[BZ_MAX_FILENAME];
+Char outFileName[BZ_MAX_FILENAME];
+Char progName[BZ_MAX_FILENAME];
+
+MaybeUInt64 bytesOut = 0;
+MaybeUInt64 bytesIn  = 0;
+
+
+/*---------------------------------------------------*/
+/*--- Header bytes                                ---*/
+/*---------------------------------------------------*/
+
+#define BZ_HDR_B 0x42                         /* 'B' */
+#define BZ_HDR_Z 0x5a                         /* 'Z' */
+#define BZ_HDR_h 0x68                         /* 'h' */
+#define BZ_HDR_0 0x30                         /* '0' */
+ 
+
+/*---------------------------------------------------*/
+/*--- I/O errors                                  ---*/
+/*---------------------------------------------------*/
+
+/*---------------------------------------------*/
+static void readError ( void )
+{
+   fprintf ( stderr,
+             "%s: I/O error reading `%s', possible reason follows.\n",
+            progName, inFileName );
+   perror ( progName );
+   fprintf ( stderr, "%s: warning: output file(s) may be incomplete.\n",
+             progName );
+   exit ( 1 );
+}
+
+
+/*---------------------------------------------*/
+static void writeError ( void )
+{
+   fprintf ( stderr,
+             "%s: I/O error reading `%s', possible reason follows.\n",
+            progName, inFileName );
+   perror ( progName );
+   fprintf ( stderr, "%s: warning: output file(s) may be incomplete.\n",
+             progName );
+   exit ( 1 );
+}
+
+
+/*---------------------------------------------*/
+static void mallocFail ( Int32 n )
+{
+   fprintf ( stderr,
+             "%s: malloc failed on request for %d bytes.\n",
+            progName, n );
+   fprintf ( stderr, "%s: warning: output file(s) may be incomplete.\n",
+             progName );
+   exit ( 1 );
+}
+
+
+/*---------------------------------------------*/
+static void tooManyBlocks ( Int32 max_handled_blocks )
+{
+   fprintf ( stderr,
+             "%s: `%s' appears to contain more than %d blocks\n",
+            progName, inFileName, max_handled_blocks );
+   fprintf ( stderr,
+             "%s: and cannot be handled.  To fix, increase\n",
+             progName );
+   fprintf ( stderr, 
+             "%s: BZ_MAX_HANDLED_BLOCKS in bzip2recover.c, and recompile.\n",
+             progName );
+   exit ( 1 );
+}
+
+
+
+/*---------------------------------------------------*/
+/*--- Bit stream I/O                              ---*/
+/*---------------------------------------------------*/
+
+typedef
+   struct {
+      FILE*  handle;
+      Int32  buffer;
+      Int32  buffLive;
+      Char   mode;
+   }
+   BitStream;
+
+
+/*---------------------------------------------*/
+static BitStream* bsOpenReadStream ( FILE* stream )
+{
+   BitStream *bs = malloc ( sizeof(BitStream) );
+   if (bs == NULL) mallocFail ( sizeof(BitStream) );
+   bs->handle = stream;
+   bs->buffer = 0;
+   bs->buffLive = 0;
+   bs->mode = 'r';
+   return bs;
+}
+
+
+/*---------------------------------------------*/
+static BitStream* bsOpenWriteStream ( FILE* stream )
+{
+   BitStream *bs = malloc ( sizeof(BitStream) );
+   if (bs == NULL) mallocFail ( sizeof(BitStream) );
+   bs->handle = stream;
+   bs->buffer = 0;
+   bs->buffLive = 0;
+   bs->mode = 'w';
+   return bs;
+}
+
+
+/*---------------------------------------------*/
+static void bsPutBit ( BitStream* bs, Int32 bit )
+{
+   if (bs->buffLive == 8) {
+      Int32 retVal = putc ( (UChar) bs->buffer, bs->handle );
+      if (retVal == EOF) writeError();
+      bytesOut++;
+      bs->buffLive = 1;
+      bs->buffer = bit & 0x1;
+   } else {
+      bs->buffer = ( (bs->buffer << 1) | (bit & 0x1) );
+      bs->buffLive++;
+   };
+}
+
+
+/*---------------------------------------------*/
+/*--
+   Returns 0 or 1, or 2 to indicate EOF.
+--*/
+static Int32 bsGetBit ( BitStream* bs )
+{
+   if (bs->buffLive > 0) {
+      bs->buffLive --;
+      return ( ((bs->buffer) >> (bs->buffLive)) & 0x1 );
+   } else {
+      Int32 retVal = getc ( bs->handle );
+      if ( retVal == EOF ) {
+         if (errno != 0) readError();
+         return 2;
+      }
+      bs->buffLive = 7;
+      bs->buffer = retVal;
+      return ( ((bs->buffer) >> 7) & 0x1 );
+   }
+}
+
+
+/*---------------------------------------------*/
+static void bsClose ( BitStream* bs )
+{
+   Int32 retVal;
+
+   if ( bs->mode == 'w' ) {
+      while ( bs->buffLive < 8 ) {
+         bs->buffLive++;
+         bs->buffer <<= 1;
+      };
+      retVal = putc ( (UChar) (bs->buffer), bs->handle );
+      if (retVal == EOF) writeError();
+      bytesOut++;
+      retVal = fflush ( bs->handle );
+      if (retVal == EOF) writeError();
+   }
+   retVal = fclose ( bs->handle );
+   if (retVal == EOF) {
+      if (bs->mode == 'w') writeError(); else readError();
+   }
+   free ( bs );
+}
+
+
+/*---------------------------------------------*/
+static void bsPutUChar ( BitStream* bs, UChar c )
+{
+   Int32 i;
+   for (i = 7; i >= 0; i--)
+      bsPutBit ( bs, (((UInt32) c) >> i) & 0x1 );
+}
+
+
+/*---------------------------------------------*/
+static void bsPutUInt32 ( BitStream* bs, UInt32 c )
+{
+   Int32 i;
+
+   for (i = 31; i >= 0; i--)
+      bsPutBit ( bs, (c >> i) & 0x1 );
+}
+
+
+/*---------------------------------------------*/
+static Bool endsInBz2 ( Char* name )
+{
+   Int32 n = strlen ( name );
+   if (n <= 4) return False;
+   return
+      (name[n-4] == '.' &&
+       name[n-3] == 'b' &&
+       name[n-2] == 'z' &&
+       name[n-1] == '2');
+}
+
+
+/*---------------------------------------------------*/
+/*---                                             ---*/
+/*---------------------------------------------------*/
+
+/* This logic isn't really right when it comes to Cygwin. */
+#ifdef _WIN32
+#  define  BZ_SPLIT_SYM  '\\'  /* path splitter on Windows platform */
+#else
+#  define  BZ_SPLIT_SYM  '/'   /* path splitter on Unix platform */
+#endif
+
+#define BLOCK_HEADER_HI  0x00003141UL
+#define BLOCK_HEADER_LO  0x59265359UL
+
+#define BLOCK_ENDMARK_HI 0x00001772UL
+#define BLOCK_ENDMARK_LO 0x45385090UL
+
+/* Increase if necessary.  However, a .bz2 file with > 50000 blocks
+   would have an uncompressed size of at least 40GB, so the chances
+   are low you'll need to up this.
+*/
+#define BZ_MAX_HANDLED_BLOCKS 50000
+
+MaybeUInt64 bStart [BZ_MAX_HANDLED_BLOCKS];
+MaybeUInt64 bEnd   [BZ_MAX_HANDLED_BLOCKS];
+MaybeUInt64 rbStart[BZ_MAX_HANDLED_BLOCKS];
+MaybeUInt64 rbEnd  [BZ_MAX_HANDLED_BLOCKS];
+
+Int32 main ( Int32 argc, Char** argv )
+{
+   FILE*       inFile;
+   FILE*       outFile;
+   BitStream*  bsIn, *bsWr;
+   Int32       b, wrBlock, currBlock, rbCtr;
+   MaybeUInt64 bitsRead;
+
+   UInt32      buffHi, buffLo, blockCRC;
+   Char*       p;
+
+   strcpy ( progName, argv[0] );
+   inFileName[0] = outFileName[0] = 0;
+
+   fprintf ( stderr, 
+             "bzip2recover 1.0.5: extracts blocks from damaged .bz2 files.\n" );
+
+   if (argc != 2) {
+      fprintf ( stderr, "%s: usage is `%s damaged_file_name'.\n",
+                        progName, progName );
+      switch (sizeof(MaybeUInt64)) {
+         case 8:
+            fprintf(stderr, 
+                    "\trestrictions on size of recovered file: None\n");
+            break;
+         case 4:
+            fprintf(stderr, 
+                    "\trestrictions on size of recovered file: 512 MB\n");
+            fprintf(stderr, 
+                    "\tto circumvent, recompile with MaybeUInt64 as an\n"
+                    "\tunsigned 64-bit int.\n");
+            break;
+         default:
+            fprintf(stderr, 
+                    "\tsizeof(MaybeUInt64) is not 4 or 8 -- "
+                    "configuration error.\n");
+            break;
+      }
+      exit(1);
+   }
+
+   if (strlen(argv[1]) >= BZ_MAX_FILENAME-20) {
+      fprintf ( stderr, 
+                "%s: supplied filename is suspiciously (>= %d chars) long.  Bye!\n",
+                progName, (int)strlen(argv[1]) );
+      exit(1);
+   }
+
+   strcpy ( inFileName, argv[1] );
+
+   inFile = fopen ( inFileName, "rb" );
+   if (inFile == NULL) {
+      fprintf ( stderr, "%s: can't read `%s'\n", progName, inFileName );
+      exit(1);
+   }
+
+   bsIn = bsOpenReadStream ( inFile );
+   fprintf ( stderr, "%s: searching for block boundaries ...\n", progName );
+
+   bitsRead = 0;
+   buffHi = buffLo = 0;
+   currBlock = 0;
+   bStart[currBlock] = 0;
+
+   rbCtr = 0;
+
+   while (True) {
+      b = bsGetBit ( bsIn );
+      bitsRead++;
+      if (b == 2) {
+         if (bitsRead >= bStart[currBlock] &&
+            (bitsRead - bStart[currBlock]) >= 40) {
+            bEnd[currBlock] = bitsRead-1;
+            if (currBlock > 0)
+               fprintf ( stderr, "   block %d runs from " MaybeUInt64_FMT 
+                                 " to " MaybeUInt64_FMT " (incomplete)\n",
+                         currBlock,  bStart[currBlock], bEnd[currBlock] );
+         } else
+            currBlock--;
+         break;
+      }
+      buffHi = (buffHi << 1) | (buffLo >> 31);
+      buffLo = (buffLo << 1) | (b & 1);
+      if ( ( (buffHi & 0x0000ffff) == BLOCK_HEADER_HI 
+             && buffLo == BLOCK_HEADER_LO)
+           || 
+           ( (buffHi & 0x0000ffff) == BLOCK_ENDMARK_HI 
+             && buffLo == BLOCK_ENDMARK_LO)
+         ) {
+         if (bitsRead > 49) {
+            bEnd[currBlock] = bitsRead-49;
+         } else {
+            bEnd[currBlock] = 0;
+         }
+         if (currBlock > 0 &&
+	     (bEnd[currBlock] - bStart[currBlock]) >= 130) {
+            fprintf ( stderr, "   block %d runs from " MaybeUInt64_FMT 
+                              " to " MaybeUInt64_FMT "\n",
+                      rbCtr+1,  bStart[currBlock], bEnd[currBlock] );
+            rbStart[rbCtr] = bStart[currBlock];
+            rbEnd[rbCtr] = bEnd[currBlock];
+            rbCtr++;
+         }
+         if (currBlock >= BZ_MAX_HANDLED_BLOCKS)
+            tooManyBlocks(BZ_MAX_HANDLED_BLOCKS);
+         currBlock++;
+
+         bStart[currBlock] = bitsRead;
+      }
+   }
+
+   bsClose ( bsIn );
+
+   /*-- identified blocks run from 1 to rbCtr inclusive. --*/
+
+   if (rbCtr < 1) {
+      fprintf ( stderr,
+                "%s: sorry, I couldn't find any block boundaries.\n",
+                progName );
+      exit(1);
+   };
+
+   fprintf ( stderr, "%s: splitting into blocks\n", progName );
+
+   inFile = fopen ( inFileName, "rb" );
+   if (inFile == NULL) {
+      fprintf ( stderr, "%s: can't open `%s'\n", progName, inFileName );
+      exit(1);
+   }
+   bsIn = bsOpenReadStream ( inFile );
+
+   /*-- placate gcc's dataflow analyser --*/
+   blockCRC = 0; bsWr = 0;
+
+   bitsRead = 0;
+   outFile = NULL;
+   wrBlock = 0;
+   while (True) {
+      b = bsGetBit(bsIn);
+      if (b == 2) break;
+      buffHi = (buffHi << 1) | (buffLo >> 31);
+      buffLo = (buffLo << 1) | (b & 1);
+      if (bitsRead == 47+rbStart[wrBlock]) 
+         blockCRC = (buffHi << 16) | (buffLo >> 16);
+
+      if (outFile != NULL && bitsRead >= rbStart[wrBlock]
+                          && bitsRead <= rbEnd[wrBlock]) {
+         bsPutBit ( bsWr, b );
+      }
+
+      bitsRead++;
+
+      if (bitsRead == rbEnd[wrBlock]+1) {
+         if (outFile != NULL) {
+            bsPutUChar ( bsWr, 0x17 ); bsPutUChar ( bsWr, 0x72 );
+            bsPutUChar ( bsWr, 0x45 ); bsPutUChar ( bsWr, 0x38 );
+            bsPutUChar ( bsWr, 0x50 ); bsPutUChar ( bsWr, 0x90 );
+            bsPutUInt32 ( bsWr, blockCRC );
+            bsClose ( bsWr );
+         }
+         if (wrBlock >= rbCtr) break;
+         wrBlock++;
+      } else
+      if (bitsRead == rbStart[wrBlock]) {
+         /* Create the output file name, correctly handling leading paths. 
+            (31.10.2001 by Sergey E. Kusikov) */
+         Char* split;
+         Int32 ofs, k;
+         for (k = 0; k < BZ_MAX_FILENAME; k++) 
+            outFileName[k] = 0;
+         strcpy (outFileName, inFileName);
+         split = strrchr (outFileName, BZ_SPLIT_SYM);
+         if (split == NULL) {
+            split = outFileName;
+         } else {
+            ++split;
+	 }
+	 /* Now split points to the start of the basename. */
+         ofs  = split - outFileName;
+         sprintf (split, "rec%5d", wrBlock+1);
+         for (p = split; *p != 0; p++) if (*p == ' ') *p = '0';
+         strcat (outFileName, inFileName + ofs);
+
+         if ( !endsInBz2(outFileName)) strcat ( outFileName, ".bz2" );
+
+         fprintf ( stderr, "   writing block %d to `%s' ...\n",
+                           wrBlock+1, outFileName );
+
+         outFile = fopen ( outFileName, "wb" );
+         if (outFile == NULL) {
+            fprintf ( stderr, "%s: can't write `%s'\n",
+                      progName, outFileName );
+            exit(1);
+         }
+         bsWr = bsOpenWriteStream ( outFile );
+         bsPutUChar ( bsWr, BZ_HDR_B );    
+         bsPutUChar ( bsWr, BZ_HDR_Z );    
+         bsPutUChar ( bsWr, BZ_HDR_h );    
+         bsPutUChar ( bsWr, BZ_HDR_0 + 9 );
+         bsPutUChar ( bsWr, 0x31 ); bsPutUChar ( bsWr, 0x41 );
+         bsPutUChar ( bsWr, 0x59 ); bsPutUChar ( bsWr, 0x26 );
+         bsPutUChar ( bsWr, 0x53 ); bsPutUChar ( bsWr, 0x59 );
+      }
+   }
+
+   fprintf ( stderr, "%s: finished\n", progName );
+   return 0;
+}
+
+
+
+/*-----------------------------------------------------------*/
+/*--- end                                  bzip2recover.c ---*/
+/*-----------------------------------------------------------*/
diff --git a/Utilities/cmbzip2/bzlib.c b/Utilities/cmbzip2/bzlib.c
new file mode 100644
index 0000000000..ef86c91e69
--- /dev/null
+++ b/Utilities/cmbzip2/bzlib.c
@@ -0,0 +1,1572 @@
+
+/*-------------------------------------------------------------*/
+/*--- Library top-level functions.                          ---*/
+/*---                                               bzlib.c ---*/
+/*-------------------------------------------------------------*/
+
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
+
+   bzip2/libbzip2 version 1.0.5 of 10 December 2007
+   Copyright (C) 1996-2007 Julian Seward <jseward@bzip.org>
+
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
+
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
+
+/* CHANGES
+   0.9.0    -- original version.
+   0.9.0a/b -- no changes in this file.
+   0.9.0c   -- made zero-length BZ_FLUSH work correctly in bzCompress().
+     fixed bzWrite/bzRead to ignore zero-length requests.
+     fixed bzread to correctly handle read requests after EOF.
+     wrong parameter order in call to bzDecompressInit in
+     bzBuffToBuffDecompress.  Fixed.
+*/
+
+#include "bzlib_private.h"
+
+
+/*---------------------------------------------------*/
+/*--- Compression stuff                           ---*/
+/*---------------------------------------------------*/
+
+
+/*---------------------------------------------------*/
+#ifndef BZ_NO_STDIO
+void BZ2_bz__AssertH__fail ( int errcode )
+{
+   fprintf(stderr, 
+      "\n\nbzip2/libbzip2: internal error number %d.\n"
+      "This is a bug in bzip2/libbzip2, %s.\n"
+      "Please report it to me at: jseward@bzip.org.  If this happened\n"
+      "when you were using some program which uses libbzip2 as a\n"
+      "component, you should also report this bug to the author(s)\n"
+      "of that program.  Please make an effort to report this bug;\n"
+      "timely and accurate bug reports eventually lead to higher\n"
+      "quality software.  Thanks.  Julian Seward, 10 December 2007.\n\n",
+      errcode,
+      BZ2_bzlibVersion()
+   );
+
+   if (errcode == 1007) {
+   fprintf(stderr,
+      "\n*** A special note about internal error number 1007 ***\n"
+      "\n"
+      "Experience suggests that a common cause of i.e. 1007\n"
+      "is unreliable memory or other hardware.  The 1007 assertion\n"
+      "just happens to cross-check the results of huge numbers of\n"
+      "memory reads/writes, and so acts (unintendedly) as a stress\n"
+      "test of your memory system.\n"
+      "\n"
+      "I suggest the following: try compressing the file again,\n"
+      "possibly monitoring progress in detail with the -vv flag.\n"
+      "\n"
+      "* If the error cannot be reproduced, and/or happens at different\n"
+      "  points in compression, you may have a flaky memory system.\n"
+      "  Try a memory-test program.  I have used Memtest86\n"
+      "  (www.memtest86.com).  At the time of writing it is free (GPLd).\n"
+      "  Memtest86 tests memory much more thorougly than your BIOSs\n"
+      "  power-on test, and may find failures that the BIOS doesn't.\n"
+      "\n"
+      "* If the error can be repeatably reproduced, this is a bug in\n"
+      "  bzip2, and I would very much like to hear about it.  Please\n"
+      "  let me know, and, ideally, save a copy of the file causing the\n"
+      "  problem -- without which I will be unable to investigate it.\n"
+      "\n"
+   );
+   }
+
+   exit(3);
+}
+#endif
+
+
+/*---------------------------------------------------*/
+static
+int bz_config_ok ( void )
+{
+   if (sizeof(int)   != 4) return 0;
+   if (sizeof(short) != 2) return 0;
+   if (sizeof(char)  != 1) return 0;
+   return 1;
+}
+
+
+/*---------------------------------------------------*/
+static
+void* default_bzalloc ( void* opaque, Int32 items, Int32 size )
+{
+   void* v = malloc ( items * size );
+   return v;
+}
+
+static
+void default_bzfree ( void* opaque, void* addr )
+{
+   if (addr != NULL) free ( addr );
+}
+
+
+/*---------------------------------------------------*/
+static
+void prepare_new_block ( EState* s )
+{
+   Int32 i;
+   s->nblock = 0;
+   s->numZ = 0;
+   s->state_out_pos = 0;
+   BZ_INITIALISE_CRC ( s->blockCRC );
+   for (i = 0; i < 256; i++) s->inUse[i] = False;
+   s->blockNo++;
+}
+
+
+/*---------------------------------------------------*/
+static
+void init_RL ( EState* s )
+{
+   s->state_in_ch  = 256;
+   s->state_in_len = 0;
+}
+
+
+static
+Bool isempty_RL ( EState* s )
+{
+   if (s->state_in_ch < 256 && s->state_in_len > 0)
+      return False; else
+      return True;
+}
+
+
+/*---------------------------------------------------*/
+int BZ_API(BZ2_bzCompressInit) 
+                    ( bz_stream* strm, 
+                     int        blockSize100k,
+                     int        verbosity,
+                     int        workFactor )
+{
+   Int32   n;
+   EState* s;
+
+   if (!bz_config_ok()) return BZ_CONFIG_ERROR;
+
+   if (strm == NULL || 
+       blockSize100k < 1 || blockSize100k > 9 ||
+       workFactor < 0 || workFactor > 250)
+     return BZ_PARAM_ERROR;
+
+   if (workFactor == 0) workFactor = 30;
+   if (strm->bzalloc == NULL) strm->bzalloc = default_bzalloc;
+   if (strm->bzfree == NULL) strm->bzfree = default_bzfree;
+
+   s = BZALLOC( sizeof(EState) );
+   if (s == NULL) return BZ_MEM_ERROR;
+   s->strm = strm;
+
+   s->arr1 = NULL;
+   s->arr2 = NULL;
+   s->ftab = NULL;
+
+   n       = 100000 * blockSize100k;
+   s->arr1 = BZALLOC( n                  * sizeof(UInt32) );
+   s->arr2 = BZALLOC( (n+BZ_N_OVERSHOOT) * sizeof(UInt32) );
+   s->ftab = BZALLOC( 65537              * sizeof(UInt32) );
+
+   if (s->arr1 == NULL || s->arr2 == NULL || s->ftab == NULL) {
+      if (s->arr1 != NULL) BZFREE(s->arr1);
+      if (s->arr2 != NULL) BZFREE(s->arr2);
+      if (s->ftab != NULL) BZFREE(s->ftab);
+      if (s       != NULL) BZFREE(s);
+      return BZ_MEM_ERROR;
+   }
+
+   s->blockNo           = 0;
+   s->state             = BZ_S_INPUT;
+   s->mode              = BZ_M_RUNNING;
+   s->combinedCRC       = 0;
+   s->blockSize100k     = blockSize100k;
+   s->nblockMAX         = 100000 * blockSize100k - 19;
+   s->verbosity         = verbosity;
+   s->workFactor        = workFactor;
+
+   s->block             = (UChar*)s->arr2;
+   s->mtfv              = (UInt16*)s->arr1;
+   s->zbits             = NULL;
+   s->ptr               = (UInt32*)s->arr1;
+
+   strm->state          = s;
+   strm->total_in_lo32  = 0;
+   strm->total_in_hi32  = 0;
+   strm->total_out_lo32 = 0;
+   strm->total_out_hi32 = 0;
+   init_RL ( s );
+   prepare_new_block ( s );
+   return BZ_OK;
+}
+
+
+/*---------------------------------------------------*/
+static
+void add_pair_to_block ( EState* s )
+{
+   Int32 i;
+   UChar ch = (UChar)(s->state_in_ch);
+   for (i = 0; i < s->state_in_len; i++) {
+      BZ_UPDATE_CRC( s->blockCRC, ch );
+   }
+   s->inUse[s->state_in_ch] = True;
+   switch (s->state_in_len) {
+      case 1:
+         s->block[s->nblock] = (UChar)ch; s->nblock++;
+         break;
+      case 2:
+         s->block[s->nblock] = (UChar)ch; s->nblock++;
+         s->block[s->nblock] = (UChar)ch; s->nblock++;
+         break;
+      case 3:
+         s->block[s->nblock] = (UChar)ch; s->nblock++;
+         s->block[s->nblock] = (UChar)ch; s->nblock++;
+         s->block[s->nblock] = (UChar)ch; s->nblock++;
+         break;
+      default:
+         s->inUse[s->state_in_len-4] = True;
+         s->block[s->nblock] = (UChar)ch; s->nblock++;
+         s->block[s->nblock] = (UChar)ch; s->nblock++;
+         s->block[s->nblock] = (UChar)ch; s->nblock++;
+         s->block[s->nblock] = (UChar)ch; s->nblock++;
+         s->block[s->nblock] = ((UChar)(s->state_in_len-4));
+         s->nblock++;
+         break;
+   }
+}
+
+
+/*---------------------------------------------------*/
+static
+void flush_RL ( EState* s )
+{
+   if (s->state_in_ch < 256) add_pair_to_block ( s );
+   init_RL ( s );
+}
+
+
+/*---------------------------------------------------*/
+#define ADD_CHAR_TO_BLOCK(zs,zchh0)               \
+{                                                 \
+   UInt32 zchh = (UInt32)(zchh0);                 \
+   /*-- fast track the common case --*/           \
+   if (zchh != zs->state_in_ch &&                 \
+       zs->state_in_len == 1) {                   \
+      UChar ch = (UChar)(zs->state_in_ch);        \
+      BZ_UPDATE_CRC( zs->blockCRC, ch );          \
+      zs->inUse[zs->state_in_ch] = True;          \
+      zs->block[zs->nblock] = (UChar)ch;          \
+      zs->nblock++;                               \
+      zs->state_in_ch = zchh;                     \
+   }                                              \
+   else                                           \
+   /*-- general, uncommon cases --*/              \
+   if (zchh != zs->state_in_ch ||                 \
+      zs->state_in_len == 255) {                  \
+      if (zs->state_in_ch < 256)                  \
+         add_pair_to_block ( zs );                \
+      zs->state_in_ch = zchh;                     \
+      zs->state_in_len = 1;                       \
+   } else {                                       \
+      zs->state_in_len++;                         \
+   }                                              \
+}
+
+
+/*---------------------------------------------------*/
+static
+Bool copy_input_until_stop ( EState* s )
+{
+   Bool progress_in = False;
+
+   if (s->mode == BZ_M_RUNNING) {
+
+      /*-- fast track the common case --*/
+      while (True) {
+         /*-- block full? --*/
+         if (s->nblock >= s->nblockMAX) break;
+         /*-- no input? --*/
+         if (s->strm->avail_in == 0) break;
+         progress_in = True;
+         ADD_CHAR_TO_BLOCK ( s, (UInt32)(*((UChar*)(s->strm->next_in))) ); 
+         s->strm->next_in++;
+         s->strm->avail_in--;
+         s->strm->total_in_lo32++;
+         if (s->strm->total_in_lo32 == 0) s->strm->total_in_hi32++;
+      }
+
+   } else {
+
+      /*-- general, uncommon case --*/
+      while (True) {
+         /*-- block full? --*/
+         if (s->nblock >= s->nblockMAX) break;
+         /*-- no input? --*/
+         if (s->strm->avail_in == 0) break;
+         /*-- flush/finish end? --*/
+         if (s->avail_in_expect == 0) break;
+         progress_in = True;
+         ADD_CHAR_TO_BLOCK ( s, (UInt32)(*((UChar*)(s->strm->next_in))) ); 
+         s->strm->next_in++;
+         s->strm->avail_in--;
+         s->strm->total_in_lo32++;
+         if (s->strm->total_in_lo32 == 0) s->strm->total_in_hi32++;
+         s->avail_in_expect--;
+      }
+   }
+   return progress_in;
+}
+
+
+/*---------------------------------------------------*/
+static
+Bool copy_output_until_stop ( EState* s )
+{
+   Bool progress_out = False;
+
+   while (True) {
+
+      /*-- no output space? --*/
+      if (s->strm->avail_out == 0) break;
+
+      /*-- block done? --*/
+      if (s->state_out_pos >= s->numZ) break;
+
+      progress_out = True;
+      *(s->strm->next_out) = s->zbits[s->state_out_pos];
+      s->state_out_pos++;
+      s->strm->avail_out--;
+      s->strm->next_out++;
+      s->strm->total_out_lo32++;
+      if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++;
+   }
+
+   return progress_out;
+}
+
+
+/*---------------------------------------------------*/
+static
+Bool handle_compress ( bz_stream* strm )
+{
+   Bool progress_in  = False;
+   Bool progress_out = False;
+   EState* s = strm->state;
+   
+   while (True) {
+
+      if (s->state == BZ_S_OUTPUT) {
+         progress_out |= copy_output_until_stop ( s );
+         if (s->state_out_pos < s->numZ) break;
+         if (s->mode == BZ_M_FINISHING && 
+             s->avail_in_expect == 0 &&
+             isempty_RL(s)) break;
+         prepare_new_block ( s );
+         s->state = BZ_S_INPUT;
+         if (s->mode == BZ_M_FLUSHING && 
+             s->avail_in_expect == 0 &&
+             isempty_RL(s)) break;
+      }
+
+      if (s->state == BZ_S_INPUT) {
+         progress_in |= copy_input_until_stop ( s );
+         if (s->mode != BZ_M_RUNNING && s->avail_in_expect == 0) {
+            flush_RL ( s );
+            BZ2_compressBlock ( s, (Bool)(s->mode == BZ_M_FINISHING) );
+            s->state = BZ_S_OUTPUT;
+         }
+         else
+         if (s->nblock >= s->nblockMAX) {
+            BZ2_compressBlock ( s, False );
+            s->state = BZ_S_OUTPUT;
+         }
+         else
+         if (s->strm->avail_in == 0) {
+            break;
+         }
+      }
+
+   }
+
+   return progress_in || progress_out;
+}
+
+
+/*---------------------------------------------------*/
+int BZ_API(BZ2_bzCompress) ( bz_stream *strm, int action )
+{
+   Bool progress;
+   EState* s;
+   if (strm == NULL) return BZ_PARAM_ERROR;
+   s = strm->state;
+   if (s == NULL) return BZ_PARAM_ERROR;
+   if (s->strm != strm) return BZ_PARAM_ERROR;
+
+   preswitch:
+   switch (s->mode) {
+
+      case BZ_M_IDLE:
+         return BZ_SEQUENCE_ERROR;
+
+      case BZ_M_RUNNING:
+         if (action == BZ_RUN) {
+            progress = handle_compress ( strm );
+            return progress ? BZ_RUN_OK : BZ_PARAM_ERROR;
+         } 
+         else
+	 if (action == BZ_FLUSH) {
+            s->avail_in_expect = strm->avail_in;
+            s->mode = BZ_M_FLUSHING;
+            goto preswitch;
+         }
+         else
+         if (action == BZ_FINISH) {
+            s->avail_in_expect = strm->avail_in;
+            s->mode = BZ_M_FINISHING;
+            goto preswitch;
+         }
+         else 
+            return BZ_PARAM_ERROR;
+
+      case BZ_M_FLUSHING:
+         if (action != BZ_FLUSH) return BZ_SEQUENCE_ERROR;
+         if (s->avail_in_expect != s->strm->avail_in) 
+            return BZ_SEQUENCE_ERROR;
+         progress = handle_compress ( strm );
+         if (s->avail_in_expect > 0 || !isempty_RL(s) ||
+             s->state_out_pos < s->numZ) return BZ_FLUSH_OK;
+         s->mode = BZ_M_RUNNING;
+         return BZ_RUN_OK;
+
+      case BZ_M_FINISHING:
+         if (action != BZ_FINISH) return BZ_SEQUENCE_ERROR;
+         if (s->avail_in_expect != s->strm->avail_in) 
+            return BZ_SEQUENCE_ERROR;
+         progress = handle_compress ( strm );
+         if (!progress) return BZ_SEQUENCE_ERROR;
+         if (s->avail_in_expect > 0 || !isempty_RL(s) ||
+             s->state_out_pos < s->numZ) return BZ_FINISH_OK;
+         s->mode = BZ_M_IDLE;
+         return BZ_STREAM_END;
+   }
+   return BZ_OK; /*--not reached--*/
+}
+
+
+/*---------------------------------------------------*/
+int BZ_API(BZ2_bzCompressEnd)  ( bz_stream *strm )
+{
+   EState* s;
+   if (strm == NULL) return BZ_PARAM_ERROR;
+   s = strm->state;
+   if (s == NULL) return BZ_PARAM_ERROR;
+   if (s->strm != strm) return BZ_PARAM_ERROR;
+
+   if (s->arr1 != NULL) BZFREE(s->arr1);
+   if (s->arr2 != NULL) BZFREE(s->arr2);
+   if (s->ftab != NULL) BZFREE(s->ftab);
+   BZFREE(strm->state);
+
+   strm->state = NULL;   
+
+   return BZ_OK;
+}
+
+
+/*---------------------------------------------------*/
+/*--- Decompression stuff                         ---*/
+/*---------------------------------------------------*/
+
+/*---------------------------------------------------*/
+int BZ_API(BZ2_bzDecompressInit) 
+                     ( bz_stream* strm, 
+                       int        verbosity,
+                       int        small )
+{
+   DState* s;
+
+   if (!bz_config_ok()) return BZ_CONFIG_ERROR;
+
+   if (strm == NULL) return BZ_PARAM_ERROR;
+   if (small != 0 && small != 1) return BZ_PARAM_ERROR;
+   if (verbosity < 0 || verbosity > 4) return BZ_PARAM_ERROR;
+
+   if (strm->bzalloc == NULL) strm->bzalloc = default_bzalloc;
+   if (strm->bzfree == NULL) strm->bzfree = default_bzfree;
+
+   s = BZALLOC( sizeof(DState) );
+   if (s == NULL) return BZ_MEM_ERROR;
+   s->strm                  = strm;
+   strm->state              = s;
+   s->state                 = BZ_X_MAGIC_1;
+   s->bsLive                = 0;
+   s->bsBuff                = 0;
+   s->calculatedCombinedCRC = 0;
+   strm->total_in_lo32      = 0;
+   strm->total_in_hi32      = 0;
+   strm->total_out_lo32     = 0;
+   strm->total_out_hi32     = 0;
+   s->smallDecompress       = (Bool)small;
+   s->ll4                   = NULL;
+   s->ll16                  = NULL;
+   s->tt                    = NULL;
+   s->currBlockNo           = 0;
+   s->verbosity             = verbosity;
+
+   return BZ_OK;
+}
+
+
+/*---------------------------------------------------*/
+/* Return  True iff data corruption is discovered.
+   Returns False if there is no problem.
+*/
+static
+Bool unRLE_obuf_to_output_FAST ( DState* s )
+{
+   UChar k1;
+
+   if (s->blockRandomised) {
+
+      while (True) {
+         /* try to finish existing run */
+         while (True) {
+            if (s->strm->avail_out == 0) return False;
+            if (s->state_out_len == 0) break;
+            *( (UChar*)(s->strm->next_out) ) = s->state_out_ch;
+            BZ_UPDATE_CRC ( s->calculatedBlockCRC, s->state_out_ch );
+            s->state_out_len--;
+            s->strm->next_out++;
+            s->strm->avail_out--;
+            s->strm->total_out_lo32++;
+            if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++;
+         }
+
+         /* can a new run be started? */
+         if (s->nblock_used == s->save_nblock+1) return False;
+               
+         /* Only caused by corrupt data stream? */
+         if (s->nblock_used > s->save_nblock+1)
+            return True;
+   
+         s->state_out_len = 1;
+         s->state_out_ch = s->k0;
+         BZ_GET_FAST(k1); BZ_RAND_UPD_MASK; 
+         k1 ^= BZ_RAND_MASK; s->nblock_used++;
+         if (s->nblock_used == s->save_nblock+1) continue;
+         if (k1 != s->k0) { s->k0 = k1; continue; };
+   
+         s->state_out_len = 2;
+         BZ_GET_FAST(k1); BZ_RAND_UPD_MASK; 
+         k1 ^= BZ_RAND_MASK; s->nblock_used++;
+         if (s->nblock_used == s->save_nblock+1) continue;
+         if (k1 != s->k0) { s->k0 = k1; continue; };
+   
+         s->state_out_len = 3;
+         BZ_GET_FAST(k1); BZ_RAND_UPD_MASK; 
+         k1 ^= BZ_RAND_MASK; s->nblock_used++;
+         if (s->nblock_used == s->save_nblock+1) continue;
+         if (k1 != s->k0) { s->k0 = k1; continue; };
+   
+         BZ_GET_FAST(k1); BZ_RAND_UPD_MASK; 
+         k1 ^= BZ_RAND_MASK; s->nblock_used++;
+         s->state_out_len = ((Int32)k1) + 4;
+         BZ_GET_FAST(s->k0); BZ_RAND_UPD_MASK; 
+         s->k0 ^= BZ_RAND_MASK; s->nblock_used++;
+      }
+
+   } else {
+
+      /* restore */
+      UInt32        c_calculatedBlockCRC = s->calculatedBlockCRC;
+      UChar         c_state_out_ch       = s->state_out_ch;
+      Int32         c_state_out_len      = s->state_out_len;
+      Int32         c_nblock_used        = s->nblock_used;
+      Int32         c_k0                 = s->k0;
+      UInt32*       c_tt                 = s->tt;
+      UInt32        c_tPos               = s->tPos;
+      char*         cs_next_out          = s->strm->next_out;
+      unsigned int  cs_avail_out         = s->strm->avail_out;
+      Int32         ro_blockSize100k     = s->blockSize100k;
+      /* end restore */
+
+      UInt32       avail_out_INIT = cs_avail_out;
+      Int32        s_save_nblockPP = s->save_nblock+1;
+      unsigned int total_out_lo32_old;
+
+      while (True) {
+
+         /* try to finish existing run */
+         if (c_state_out_len > 0) {
+            while (True) {
+               if (cs_avail_out == 0) goto return_notr;
+               if (c_state_out_len == 1) break;
+               *( (UChar*)(cs_next_out) ) = c_state_out_ch;
+               BZ_UPDATE_CRC ( c_calculatedBlockCRC, c_state_out_ch );
+               c_state_out_len--;
+               cs_next_out++;
+               cs_avail_out--;
+            }
+            s_state_out_len_eq_one:
+            {
+               if (cs_avail_out == 0) { 
+                  c_state_out_len = 1; goto return_notr;
+               };
+               *( (UChar*)(cs_next_out) ) = c_state_out_ch;
+               BZ_UPDATE_CRC ( c_calculatedBlockCRC, c_state_out_ch );
+               cs_next_out++;
+               cs_avail_out--;
+            }
+         }   
+         /* Only caused by corrupt data stream? */
+         if (c_nblock_used > s_save_nblockPP)
+            return True;
+
+         /* can a new run be started? */
+         if (c_nblock_used == s_save_nblockPP) {
+            c_state_out_len = 0; goto return_notr;
+         };   
+         c_state_out_ch = c_k0;
+         BZ_GET_FAST_C(k1); c_nblock_used++;
+         if (k1 != c_k0) { 
+            c_k0 = k1; goto s_state_out_len_eq_one; 
+         };
+         if (c_nblock_used == s_save_nblockPP) 
+            goto s_state_out_len_eq_one;
+   
+         c_state_out_len = 2;
+         BZ_GET_FAST_C(k1); c_nblock_used++;
+         if (c_nblock_used == s_save_nblockPP) continue;
+         if (k1 != c_k0) { c_k0 = k1; continue; };
+   
+         c_state_out_len = 3;
+         BZ_GET_FAST_C(k1); c_nblock_used++;
+         if (c_nblock_used == s_save_nblockPP) continue;
+         if (k1 != c_k0) { c_k0 = k1; continue; };
+   
+         BZ_GET_FAST_C(k1); c_nblock_used++;
+         c_state_out_len = ((Int32)k1) + 4;
+         BZ_GET_FAST_C(c_k0); c_nblock_used++;
+      }
+
+      return_notr:
+      total_out_lo32_old = s->strm->total_out_lo32;
+      s->strm->total_out_lo32 += (avail_out_INIT - cs_avail_out);
+      if (s->strm->total_out_lo32 < total_out_lo32_old)
+         s->strm->total_out_hi32++;
+
+      /* save */
+      s->calculatedBlockCRC = c_calculatedBlockCRC;
+      s->state_out_ch       = c_state_out_ch;
+      s->state_out_len      = c_state_out_len;
+      s->nblock_used        = c_nblock_used;
+      s->k0                 = c_k0;
+      s->tt                 = c_tt;
+      s->tPos               = c_tPos;
+      s->strm->next_out     = cs_next_out;
+      s->strm->avail_out    = cs_avail_out;
+      /* end save */
+   }
+   return False;
+}
+
+
+
+/*---------------------------------------------------*/
+__inline__ Int32 BZ2_indexIntoF ( Int32 indx, Int32 *cftab )
+{
+   Int32 nb, na, mid;
+   nb = 0;
+   na = 256;
+   do {
+      mid = (nb + na) >> 1;
+      if (indx >= cftab[mid]) nb = mid; else na = mid;
+   }
+   while (na - nb != 1);
+   return nb;
+}
+
+
+/*---------------------------------------------------*/
+/* Return  True iff data corruption is discovered.
+   Returns False if there is no problem.
+*/
+static
+Bool unRLE_obuf_to_output_SMALL ( DState* s )
+{
+   UChar k1;
+
+   if (s->blockRandomised) {
+
+      while (True) {
+         /* try to finish existing run */
+         while (True) {
+            if (s->strm->avail_out == 0) return False;
+            if (s->state_out_len == 0) break;
+            *( (UChar*)(s->strm->next_out) ) = s->state_out_ch;
+            BZ_UPDATE_CRC ( s->calculatedBlockCRC, s->state_out_ch );
+            s->state_out_len--;
+            s->strm->next_out++;
+            s->strm->avail_out--;
+            s->strm->total_out_lo32++;
+            if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++;
+         }
+   
+         /* can a new run be started? */
+         if (s->nblock_used == s->save_nblock+1) return False;
+
+         /* Only caused by corrupt data stream? */
+         if (s->nblock_used > s->save_nblock+1)
+            return True;
+   
+         s->state_out_len = 1;
+         s->state_out_ch = s->k0;
+         BZ_GET_SMALL(k1); BZ_RAND_UPD_MASK; 
+         k1 ^= BZ_RAND_MASK; s->nblock_used++;
+         if (s->nblock_used == s->save_nblock+1) continue;
+         if (k1 != s->k0) { s->k0 = k1; continue; };
+   
+         s->state_out_len = 2;
+         BZ_GET_SMALL(k1); BZ_RAND_UPD_MASK; 
+         k1 ^= BZ_RAND_MASK; s->nblock_used++;
+         if (s->nblock_used == s->save_nblock+1) continue;
+         if (k1 != s->k0) { s->k0 = k1; continue; };
+   
+         s->state_out_len = 3;
+         BZ_GET_SMALL(k1); BZ_RAND_UPD_MASK; 
+         k1 ^= BZ_RAND_MASK; s->nblock_used++;
+         if (s->nblock_used == s->save_nblock+1) continue;
+         if (k1 != s->k0) { s->k0 = k1; continue; };
+   
+         BZ_GET_SMALL(k1); BZ_RAND_UPD_MASK; 
+         k1 ^= BZ_RAND_MASK; s->nblock_used++;
+         s->state_out_len = ((Int32)k1) + 4;
+         BZ_GET_SMALL(s->k0); BZ_RAND_UPD_MASK; 
+         s->k0 ^= BZ_RAND_MASK; s->nblock_used++;
+      }
+
+   } else {
+
+      while (True) {
+         /* try to finish existing run */
+         while (True) {
+            if (s->strm->avail_out == 0) return False;
+            if (s->state_out_len == 0) break;
+            *( (UChar*)(s->strm->next_out) ) = s->state_out_ch;
+            BZ_UPDATE_CRC ( s->calculatedBlockCRC, s->state_out_ch );
+            s->state_out_len--;
+            s->strm->next_out++;
+            s->strm->avail_out--;
+            s->strm->total_out_lo32++;
+            if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++;
+         }
+   
+         /* can a new run be started? */
+         if (s->nblock_used == s->save_nblock+1) return False;
+
+         /* Only caused by corrupt data stream? */
+         if (s->nblock_used > s->save_nblock+1)
+            return True;
+   
+         s->state_out_len = 1;
+         s->state_out_ch = s->k0;
+         BZ_GET_SMALL(k1); s->nblock_used++;
+         if (s->nblock_used == s->save_nblock+1) continue;
+         if (k1 != s->k0) { s->k0 = k1; continue; };
+   
+         s->state_out_len = 2;
+         BZ_GET_SMALL(k1); s->nblock_used++;
+         if (s->nblock_used == s->save_nblock+1) continue;
+         if (k1 != s->k0) { s->k0 = k1; continue; };
+   
+         s->state_out_len = 3;
+         BZ_GET_SMALL(k1); s->nblock_used++;
+         if (s->nblock_used == s->save_nblock+1) continue;
+         if (k1 != s->k0) { s->k0 = k1; continue; };
+   
+         BZ_GET_SMALL(k1); s->nblock_used++;
+         s->state_out_len = ((Int32)k1) + 4;
+         BZ_GET_SMALL(s->k0); s->nblock_used++;
+      }
+
+   }
+}
+
+
+/*---------------------------------------------------*/
+int BZ_API(BZ2_bzDecompress) ( bz_stream *strm )
+{
+   Bool    corrupt;
+   DState* s;
+   if (strm == NULL) return BZ_PARAM_ERROR;
+   s = strm->state;
+   if (s == NULL) return BZ_PARAM_ERROR;
+   if (s->strm != strm) return BZ_PARAM_ERROR;
+
+   while (True) {
+      if (s->state == BZ_X_IDLE) return BZ_SEQUENCE_ERROR;
+      if (s->state == BZ_X_OUTPUT) {
+         if (s->smallDecompress)
+            corrupt = unRLE_obuf_to_output_SMALL ( s ); else
+            corrupt = unRLE_obuf_to_output_FAST  ( s );
+         if (corrupt) return BZ_DATA_ERROR;
+         if (s->nblock_used == s->save_nblock+1 && s->state_out_len == 0) {
+            BZ_FINALISE_CRC ( s->calculatedBlockCRC );
+            if (s->verbosity >= 3) 
+               VPrintf2 ( " {0x%08x, 0x%08x}", s->storedBlockCRC, 
+                          s->calculatedBlockCRC );
+            if (s->verbosity >= 2) VPrintf0 ( "]" );
+            if (s->calculatedBlockCRC != s->storedBlockCRC)
+               return BZ_DATA_ERROR;
+            s->calculatedCombinedCRC 
+               = (s->calculatedCombinedCRC << 1) | 
+                    (s->calculatedCombinedCRC >> 31);
+            s->calculatedCombinedCRC ^= s->calculatedBlockCRC;
+            s->state = BZ_X_BLKHDR_1;
+         } else {
+            return BZ_OK;
+         }
+      }
+      if (s->state >= BZ_X_MAGIC_1) {
+         Int32 r = BZ2_decompress ( s );
+         if (r == BZ_STREAM_END) {
+            if (s->verbosity >= 3)
+               VPrintf2 ( "\n    combined CRCs: stored = 0x%08x, computed = 0x%08x", 
+                          s->storedCombinedCRC, s->calculatedCombinedCRC );
+            if (s->calculatedCombinedCRC != s->storedCombinedCRC)
+               return BZ_DATA_ERROR;
+            return r;
+         }
+         if (s->state != BZ_X_OUTPUT) return r;
+      }
+   }
+
+   AssertH ( 0, 6001 );
+
+   return 0;  /*NOTREACHED*/
+}
+
+
+/*---------------------------------------------------*/
+int BZ_API(BZ2_bzDecompressEnd)  ( bz_stream *strm )
+{
+   DState* s;
+   if (strm == NULL) return BZ_PARAM_ERROR;
+   s = strm->state;
+   if (s == NULL) return BZ_PARAM_ERROR;
+   if (s->strm != strm) return BZ_PARAM_ERROR;
+
+   if (s->tt   != NULL) BZFREE(s->tt);
+   if (s->ll16 != NULL) BZFREE(s->ll16);
+   if (s->ll4  != NULL) BZFREE(s->ll4);
+
+   BZFREE(strm->state);
+   strm->state = NULL;
+
+   return BZ_OK;
+}
+
+
+#ifndef BZ_NO_STDIO
+/*---------------------------------------------------*/
+/*--- File I/O stuff                              ---*/
+/*---------------------------------------------------*/
+
+#define BZ_SETERR(eee)                    \
+{                                         \
+   if (bzerror != NULL) *bzerror = eee;   \
+   if (bzf != NULL) bzf->lastErr = eee;   \
+}
+
+typedef 
+   struct {
+      FILE*     handle;
+      Char      buf[BZ_MAX_UNUSED];
+      Int32     bufN;
+      Bool      writing;
+      bz_stream strm;
+      Int32     lastErr;
+      Bool      initialisedOk;
+   }
+   bzFile;
+
+
+/*---------------------------------------------*/
+static Bool myfeof ( FILE* f )
+{
+   Int32 c = fgetc ( f );
+   if (c == EOF) return True;
+   ungetc ( c, f );
+   return False;
+}
+
+
+/*---------------------------------------------------*/
+BZFILE* BZ_API(BZ2_bzWriteOpen) 
+                    ( int*  bzerror,      
+                      FILE* f, 
+                      int   blockSize100k, 
+                      int   verbosity,
+                      int   workFactor )
+{
+   Int32   ret;
+   bzFile* bzf = NULL;
+
+   BZ_SETERR(BZ_OK);
+
+   if (f == NULL ||
+       (blockSize100k < 1 || blockSize100k > 9) ||
+       (workFactor < 0 || workFactor > 250) ||
+       (verbosity < 0 || verbosity > 4))
+      { BZ_SETERR(BZ_PARAM_ERROR); return NULL; };
+
+   if (ferror(f))
+      { BZ_SETERR(BZ_IO_ERROR); return NULL; };
+
+   bzf = malloc ( sizeof(bzFile) );
+   if (bzf == NULL)
+      { BZ_SETERR(BZ_MEM_ERROR); return NULL; };
+
+   BZ_SETERR(BZ_OK);
+   bzf->initialisedOk = False;
+   bzf->bufN          = 0;
+   bzf->handle        = f;
+   bzf->writing       = True;
+   bzf->strm.bzalloc  = NULL;
+   bzf->strm.bzfree   = NULL;
+   bzf->strm.opaque   = NULL;
+
+   if (workFactor == 0) workFactor = 30;
+   ret = BZ2_bzCompressInit ( &(bzf->strm), blockSize100k, 
+                              verbosity, workFactor );
+   if (ret != BZ_OK)
+      { BZ_SETERR(ret); free(bzf); return NULL; };
+
+   bzf->strm.avail_in = 0;
+   bzf->initialisedOk = True;
+   return bzf;   
+}
+
+
+
+/*---------------------------------------------------*/
+void BZ_API(BZ2_bzWrite)
+             ( int*    bzerror, 
+               BZFILE* b, 
+               void*   buf, 
+               int     len )
+{
+   Int32 n, n2, ret;
+   bzFile* bzf = (bzFile*)b;
+
+   BZ_SETERR(BZ_OK);
+   if (bzf == NULL || buf == NULL || len < 0)
+      { BZ_SETERR(BZ_PARAM_ERROR); return; };
+   if (!(bzf->writing))
+      { BZ_SETERR(BZ_SEQUENCE_ERROR); return; };
+   if (ferror(bzf->handle))
+      { BZ_SETERR(BZ_IO_ERROR); return; };
+
+   if (len == 0)
+      { BZ_SETERR(BZ_OK); return; };
+
+   bzf->strm.avail_in = len;
+   bzf->strm.next_in  = buf;
+
+   while (True) {
+      bzf->strm.avail_out = BZ_MAX_UNUSED;
+      bzf->strm.next_out = bzf->buf;
+      ret = BZ2_bzCompress ( &(bzf->strm), BZ_RUN );
+      if (ret != BZ_RUN_OK)
+         { BZ_SETERR(ret); return; };
+
+      if (bzf->strm.avail_out < BZ_MAX_UNUSED) {
+         n = BZ_MAX_UNUSED - bzf->strm.avail_out;
+         n2 = fwrite ( (void*)(bzf->buf), sizeof(UChar), 
+                       n, bzf->handle );
+         if (n != n2 || ferror(bzf->handle))
+            { BZ_SETERR(BZ_IO_ERROR); return; };
+      }
+
+      if (bzf->strm.avail_in == 0)
+         { BZ_SETERR(BZ_OK); return; };
+   }
+}
+
+
+/*---------------------------------------------------*/
+void BZ_API(BZ2_bzWriteClose)
+                  ( int*          bzerror, 
+                    BZFILE*       b, 
+                    int           abandon,
+                    unsigned int* nbytes_in,
+                    unsigned int* nbytes_out )
+{
+   BZ2_bzWriteClose64 ( bzerror, b, abandon, 
+                        nbytes_in, NULL, nbytes_out, NULL );
+}
+
+
+void BZ_API(BZ2_bzWriteClose64)
+                  ( int*          bzerror, 
+                    BZFILE*       b, 
+                    int           abandon,
+                    unsigned int* nbytes_in_lo32,
+                    unsigned int* nbytes_in_hi32,
+                    unsigned int* nbytes_out_lo32,
+                    unsigned int* nbytes_out_hi32 )
+{
+   Int32   n, n2, ret;
+   bzFile* bzf = (bzFile*)b;
+
+   if (bzf == NULL)
+      { BZ_SETERR(BZ_OK); return; };
+   if (!(bzf->writing))
+      { BZ_SETERR(BZ_SEQUENCE_ERROR); return; };
+   if (ferror(bzf->handle))
+      { BZ_SETERR(BZ_IO_ERROR); return; };
+
+   if (nbytes_in_lo32 != NULL) *nbytes_in_lo32 = 0;
+   if (nbytes_in_hi32 != NULL) *nbytes_in_hi32 = 0;
+   if (nbytes_out_lo32 != NULL) *nbytes_out_lo32 = 0;
+   if (nbytes_out_hi32 != NULL) *nbytes_out_hi32 = 0;
+
+   if ((!abandon) && bzf->lastErr == BZ_OK) {
+      while (True) {
+         bzf->strm.avail_out = BZ_MAX_UNUSED;
+         bzf->strm.next_out = bzf->buf;
+         ret = BZ2_bzCompress ( &(bzf->strm), BZ_FINISH );
+         if (ret != BZ_FINISH_OK && ret != BZ_STREAM_END)
+            { BZ_SETERR(ret); return; };
+
+         if (bzf->strm.avail_out < BZ_MAX_UNUSED) {
+            n = BZ_MAX_UNUSED - bzf->strm.avail_out;
+            n2 = fwrite ( (void*)(bzf->buf), sizeof(UChar), 
+                          n, bzf->handle );
+            if (n != n2 || ferror(bzf->handle))
+               { BZ_SETERR(BZ_IO_ERROR); return; };
+         }
+
+         if (ret == BZ_STREAM_END) break;
+      }
+   }
+
+   if ( !abandon && !ferror ( bzf->handle ) ) {
+      fflush ( bzf->handle );
+      if (ferror(bzf->handle))
+         { BZ_SETERR(BZ_IO_ERROR); return; };
+   }
+
+   if (nbytes_in_lo32 != NULL)
+      *nbytes_in_lo32 = bzf->strm.total_in_lo32;
+   if (nbytes_in_hi32 != NULL)
+      *nbytes_in_hi32 = bzf->strm.total_in_hi32;
+   if (nbytes_out_lo32 != NULL)
+      *nbytes_out_lo32 = bzf->strm.total_out_lo32;
+   if (nbytes_out_hi32 != NULL)
+      *nbytes_out_hi32 = bzf->strm.total_out_hi32;
+
+   BZ_SETERR(BZ_OK);
+   BZ2_bzCompressEnd ( &(bzf->strm) );
+   free ( bzf );
+}
+
+
+/*---------------------------------------------------*/
+BZFILE* BZ_API(BZ2_bzReadOpen) 
+                   ( int*  bzerror, 
+                     FILE* f, 
+                     int   verbosity,
+                     int   small,
+                     void* unused,
+                     int   nUnused )
+{
+   bzFile* bzf = NULL;
+   int     ret;
+
+   BZ_SETERR(BZ_OK);
+
+   if (f == NULL || 
+       (small != 0 && small != 1) ||
+       (verbosity < 0 || verbosity > 4) ||
+       (unused == NULL && nUnused != 0) ||
+       (unused != NULL && (nUnused < 0 || nUnused > BZ_MAX_UNUSED)))
+      { BZ_SETERR(BZ_PARAM_ERROR); return NULL; };
+
+   if (ferror(f))
+      { BZ_SETERR(BZ_IO_ERROR); return NULL; };
+
+   bzf = malloc ( sizeof(bzFile) );
+   if (bzf == NULL) 
+      { BZ_SETERR(BZ_MEM_ERROR); return NULL; };
+
+   BZ_SETERR(BZ_OK);
+
+   bzf->initialisedOk = False;
+   bzf->handle        = f;
+   bzf->bufN          = 0;
+   bzf->writing       = False;
+   bzf->strm.bzalloc  = NULL;
+   bzf->strm.bzfree   = NULL;
+   bzf->strm.opaque   = NULL;
+   
+   while (nUnused > 0) {
+      bzf->buf[bzf->bufN] = *((UChar*)(unused)); bzf->bufN++;
+      unused = ((void*)( 1 + ((UChar*)(unused))  ));
+      nUnused--;
+   }
+
+   ret = BZ2_bzDecompressInit ( &(bzf->strm), verbosity, small );
+   if (ret != BZ_OK)
+      { BZ_SETERR(ret); free(bzf); return NULL; };
+
+   bzf->strm.avail_in = bzf->bufN;
+   bzf->strm.next_in  = bzf->buf;
+
+   bzf->initialisedOk = True;
+   return bzf;   
+}
+
+
+/*---------------------------------------------------*/
+void BZ_API(BZ2_bzReadClose) ( int *bzerror, BZFILE *b )
+{
+   bzFile* bzf = (bzFile*)b;
+
+   BZ_SETERR(BZ_OK);
+   if (bzf == NULL)
+      { BZ_SETERR(BZ_OK); return; };
+
+   if (bzf->writing)
+      { BZ_SETERR(BZ_SEQUENCE_ERROR); return; };
+
+   if (bzf->initialisedOk)
+      (void)BZ2_bzDecompressEnd ( &(bzf->strm) );
+   free ( bzf );
+}
+
+
+/*---------------------------------------------------*/
+int BZ_API(BZ2_bzRead) 
+           ( int*    bzerror, 
+             BZFILE* b, 
+             void*   buf, 
+             int     len )
+{
+   Int32   n, ret;
+   bzFile* bzf = (bzFile*)b;
+
+   BZ_SETERR(BZ_OK);
+
+   if (bzf == NULL || buf == NULL || len < 0)
+      { BZ_SETERR(BZ_PARAM_ERROR); return 0; };
+
+   if (bzf->writing)
+      { BZ_SETERR(BZ_SEQUENCE_ERROR); return 0; };
+
+   if (len == 0)
+      { BZ_SETERR(BZ_OK); return 0; };
+
+   bzf->strm.avail_out = len;
+   bzf->strm.next_out = buf;
+
+   while (True) {
+
+      if (ferror(bzf->handle)) 
+         { BZ_SETERR(BZ_IO_ERROR); return 0; };
+
+      if (bzf->strm.avail_in == 0 && !myfeof(bzf->handle)) {
+         n = fread ( bzf->buf, sizeof(UChar), 
+                     BZ_MAX_UNUSED, bzf->handle );
+         if (ferror(bzf->handle))
+            { BZ_SETERR(BZ_IO_ERROR); return 0; };
+         bzf->bufN = n;
+         bzf->strm.avail_in = bzf->bufN;
+         bzf->strm.next_in = bzf->buf;
+      }
+
+      ret = BZ2_bzDecompress ( &(bzf->strm) );
+
+      if (ret != BZ_OK && ret != BZ_STREAM_END)
+         { BZ_SETERR(ret); return 0; };
+
+      if (ret == BZ_OK && myfeof(bzf->handle) && 
+          bzf->strm.avail_in == 0 && bzf->strm.avail_out > 0)
+         { BZ_SETERR(BZ_UNEXPECTED_EOF); return 0; };
+
+      if (ret == BZ_STREAM_END)
+         { BZ_SETERR(BZ_STREAM_END);
+           return len - bzf->strm.avail_out; };
+      if (bzf->strm.avail_out == 0)
+         { BZ_SETERR(BZ_OK); return len; };
+      
+   }
+
+   return 0; /*not reached*/
+}
+
+
+/*---------------------------------------------------*/
+void BZ_API(BZ2_bzReadGetUnused) 
+                     ( int*    bzerror, 
+                       BZFILE* b, 
+                       void**  unused, 
+                       int*    nUnused )
+{
+   bzFile* bzf = (bzFile*)b;
+   if (bzf == NULL)
+      { BZ_SETERR(BZ_PARAM_ERROR); return; };
+   if (bzf->lastErr != BZ_STREAM_END)
+      { BZ_SETERR(BZ_SEQUENCE_ERROR); return; };
+   if (unused == NULL || nUnused == NULL)
+      { BZ_SETERR(BZ_PARAM_ERROR); return; };
+
+   BZ_SETERR(BZ_OK);
+   *nUnused = bzf->strm.avail_in;
+   *unused = bzf->strm.next_in;
+}
+#endif
+
+
+/*---------------------------------------------------*/
+/*--- Misc convenience stuff                      ---*/
+/*---------------------------------------------------*/
+
+/*---------------------------------------------------*/
+int BZ_API(BZ2_bzBuffToBuffCompress) 
+                         ( char*         dest, 
+                           unsigned int* destLen,
+                           char*         source, 
+                           unsigned int  sourceLen,
+                           int           blockSize100k, 
+                           int           verbosity, 
+                           int           workFactor )
+{
+   bz_stream strm;
+   int ret;
+
+   if (dest == NULL || destLen == NULL || 
+       source == NULL ||
+       blockSize100k < 1 || blockSize100k > 9 ||
+       verbosity < 0 || verbosity > 4 ||
+       workFactor < 0 || workFactor > 250) 
+      return BZ_PARAM_ERROR;
+
+   if (workFactor == 0) workFactor = 30;
+   strm.bzalloc = NULL;
+   strm.bzfree = NULL;
+   strm.opaque = NULL;
+   ret = BZ2_bzCompressInit ( &strm, blockSize100k, 
+                              verbosity, workFactor );
+   if (ret != BZ_OK) return ret;
+
+   strm.next_in = source;
+   strm.next_out = dest;
+   strm.avail_in = sourceLen;
+   strm.avail_out = *destLen;
+
+   ret = BZ2_bzCompress ( &strm, BZ_FINISH );
+   if (ret == BZ_FINISH_OK) goto output_overflow;
+   if (ret != BZ_STREAM_END) goto errhandler;
+
+   /* normal termination */
+   *destLen -= strm.avail_out;   
+   BZ2_bzCompressEnd ( &strm );
+   return BZ_OK;
+
+   output_overflow:
+   BZ2_bzCompressEnd ( &strm );
+   return BZ_OUTBUFF_FULL;
+
+   errhandler:
+   BZ2_bzCompressEnd ( &strm );
+   return ret;
+}
+
+
+/*---------------------------------------------------*/
+int BZ_API(BZ2_bzBuffToBuffDecompress) 
+                           ( char*         dest, 
+                             unsigned int* destLen,
+                             char*         source, 
+                             unsigned int  sourceLen,
+                             int           small,
+                             int           verbosity )
+{
+   bz_stream strm;
+   int ret;
+
+   if (dest == NULL || destLen == NULL || 
+       source == NULL ||
+       (small != 0 && small != 1) ||
+       verbosity < 0 || verbosity > 4) 
+          return BZ_PARAM_ERROR;
+
+   strm.bzalloc = NULL;
+   strm.bzfree = NULL;
+   strm.opaque = NULL;
+   ret = BZ2_bzDecompressInit ( &strm, verbosity, small );
+   if (ret != BZ_OK) return ret;
+
+   strm.next_in = source;
+   strm.next_out = dest;
+   strm.avail_in = sourceLen;
+   strm.avail_out = *destLen;
+
+   ret = BZ2_bzDecompress ( &strm );
+   if (ret == BZ_OK) goto output_overflow_or_eof;
+   if (ret != BZ_STREAM_END) goto errhandler;
+
+   /* normal termination */
+   *destLen -= strm.avail_out;
+   BZ2_bzDecompressEnd ( &strm );
+   return BZ_OK;
+
+   output_overflow_or_eof:
+   if (strm.avail_out > 0) {
+      BZ2_bzDecompressEnd ( &strm );
+      return BZ_UNEXPECTED_EOF;
+   } else {
+      BZ2_bzDecompressEnd ( &strm );
+      return BZ_OUTBUFF_FULL;
+   };      
+
+   errhandler:
+   BZ2_bzDecompressEnd ( &strm );
+   return ret; 
+}
+
+
+/*---------------------------------------------------*/
+/*--
+   Code contributed by Yoshioka Tsuneo (tsuneo@rr.iij4u.or.jp)
+   to support better zlib compatibility.
+   This code is not _officially_ part of libbzip2 (yet);
+   I haven't tested it, documented it, or considered the
+   threading-safeness of it.
+   If this code breaks, please contact both Yoshioka and me.
+--*/
+/*---------------------------------------------------*/
+
+/*---------------------------------------------------*/
+/*--
+   return version like "0.9.5d, 4-Sept-1999".
+--*/
+const char * BZ_API(BZ2_bzlibVersion)(void)
+{
+   return BZ_VERSION;
+}
+
+
+#ifndef BZ_NO_STDIO
+/*---------------------------------------------------*/
+
+#if defined(_WIN32) || defined(OS2) || defined(MSDOS)
+#   include <fcntl.h>
+#   include <io.h>
+#   define SET_BINARY_MODE(file) setmode(fileno(file),O_BINARY)
+#else
+#   define SET_BINARY_MODE(file)
+#endif
+static
+BZFILE * bzopen_or_bzdopen
+               ( const char *path,   /* no use when bzdopen */
+                 int fd,             /* no use when bzdopen */
+                 const char *mode,
+                 int open_mode)      /* bzopen: 0, bzdopen:1 */
+{
+   int    bzerr;
+   char   unused[BZ_MAX_UNUSED];
+   int    blockSize100k = 9;
+   int    writing       = 0;
+   char   mode2[10]     = "";
+   FILE   *fp           = NULL;
+   BZFILE *bzfp         = NULL;
+   int    verbosity     = 0;
+   int    workFactor    = 30;
+   int    smallMode     = 0;
+   int    nUnused       = 0; 
+
+   if (mode == NULL) return NULL;
+   while (*mode) {
+      switch (*mode) {
+      case 'r':
+         writing = 0; break;
+      case 'w':
+         writing = 1; break;
+      case 's':
+         smallMode = 1; break;
+      default:
+         if (isdigit((int)(*mode))) {
+            blockSize100k = *mode-BZ_HDR_0;
+         }
+      }
+      mode++;
+   }
+   strcat(mode2, writing ? "w" : "r" );
+   strcat(mode2,"b");   /* binary mode */
+
+   if (open_mode==0) {
+      if (path==NULL || strcmp(path,"")==0) {
+        fp = (writing ? stdout : stdin);
+        SET_BINARY_MODE(fp);
+      } else {
+        fp = fopen(path,mode2);
+      }
+   } else {
+#ifdef BZ_STRICT_ANSI
+      fp = NULL;
+#else
+      fp = fdopen(fd,mode2);
+#endif
+   }
+   if (fp == NULL) return NULL;
+
+   if (writing) {
+      /* Guard against total chaos and anarchy -- JRS */
+      if (blockSize100k < 1) blockSize100k = 1;
+      if (blockSize100k > 9) blockSize100k = 9; 
+      bzfp = BZ2_bzWriteOpen(&bzerr,fp,blockSize100k,
+                             verbosity,workFactor);
+   } else {
+      bzfp = BZ2_bzReadOpen(&bzerr,fp,verbosity,smallMode,
+                            unused,nUnused);
+   }
+   if (bzfp == NULL) {
+      if (fp != stdin && fp != stdout) fclose(fp);
+      return NULL;
+   }
+   return bzfp;
+}
+
+
+/*---------------------------------------------------*/
+/*--
+   open file for read or write.
+      ex) bzopen("file","w9")
+      case path="" or NULL => use stdin or stdout.
+--*/
+BZFILE * BZ_API(BZ2_bzopen)
+               ( const char *path,
+                 const char *mode )
+{
+   return bzopen_or_bzdopen(path,-1,mode,/*bzopen*/0);
+}
+
+
+/*---------------------------------------------------*/
+BZFILE * BZ_API(BZ2_bzdopen)
+               ( int fd,
+                 const char *mode )
+{
+   return bzopen_or_bzdopen(NULL,fd,mode,/*bzdopen*/1);
+}
+
+
+/*---------------------------------------------------*/
+int BZ_API(BZ2_bzread) (BZFILE* b, void* buf, int len )
+{
+   int bzerr, nread;
+   if (((bzFile*)b)->lastErr == BZ_STREAM_END) return 0;
+   nread = BZ2_bzRead(&bzerr,b,buf,len);
+   if (bzerr == BZ_OK || bzerr == BZ_STREAM_END) {
+      return nread;
+   } else {
+      return -1;
+   }
+}
+
+
+/*---------------------------------------------------*/
+int BZ_API(BZ2_bzwrite) (BZFILE* b, void* buf, int len )
+{
+   int bzerr;
+
+   BZ2_bzWrite(&bzerr,b,buf,len);
+   if(bzerr == BZ_OK){
+      return len;
+   }else{
+      return -1;
+   }
+}
+
+
+/*---------------------------------------------------*/
+int BZ_API(BZ2_bzflush) (BZFILE *b)
+{
+   /* do nothing now... */
+   return 0;
+}
+
+
+/*---------------------------------------------------*/
+void BZ_API(BZ2_bzclose) (BZFILE* b)
+{
+   int bzerr;
+   FILE *fp;
+   
+   if (b==NULL) {return;}
+   fp = ((bzFile *)b)->handle;
+   if(((bzFile*)b)->writing){
+      BZ2_bzWriteClose(&bzerr,b,0,NULL,NULL);
+      if(bzerr != BZ_OK){
+         BZ2_bzWriteClose(NULL,b,1,NULL,NULL);
+      }
+   }else{
+      BZ2_bzReadClose(&bzerr,b);
+   }
+   if(fp!=stdin && fp!=stdout){
+      fclose(fp);
+   }
+}
+
+
+/*---------------------------------------------------*/
+/*--
+   return last error code 
+--*/
+static const char *bzerrorstrings[] = {
+       "OK"
+      ,"SEQUENCE_ERROR"
+      ,"PARAM_ERROR"
+      ,"MEM_ERROR"
+      ,"DATA_ERROR"
+      ,"DATA_ERROR_MAGIC"
+      ,"IO_ERROR"
+      ,"UNEXPECTED_EOF"
+      ,"OUTBUFF_FULL"
+      ,"CONFIG_ERROR"
+      ,"???"   /* for future */
+      ,"???"   /* for future */
+      ,"???"   /* for future */
+      ,"???"   /* for future */
+      ,"???"   /* for future */
+      ,"???"   /* for future */
+};
+
+
+const char * BZ_API(BZ2_bzerror) (BZFILE *b, int *errnum)
+{
+   int err = ((bzFile *)b)->lastErr;
+
+   if(err>0) err = 0;
+   *errnum = err;
+   return bzerrorstrings[err*-1];
+}
+#endif
+
+
+/*-------------------------------------------------------------*/
+/*--- end                                           bzlib.c ---*/
+/*-------------------------------------------------------------*/
diff --git a/Utilities/cmbzip2/bzlib.h b/Utilities/cmbzip2/bzlib.h
new file mode 100644
index 0000000000..c5b75d6d8f
--- /dev/null
+++ b/Utilities/cmbzip2/bzlib.h
@@ -0,0 +1,282 @@
+
+/*-------------------------------------------------------------*/
+/*--- Public header file for the library.                   ---*/
+/*---                                               bzlib.h ---*/
+/*-------------------------------------------------------------*/
+
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
+
+   bzip2/libbzip2 version 1.0.5 of 10 December 2007
+   Copyright (C) 1996-2007 Julian Seward <jseward@bzip.org>
+
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
+
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
+
+
+#ifndef _BZLIB_H
+#define _BZLIB_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define BZ_RUN               0
+#define BZ_FLUSH             1
+#define BZ_FINISH            2
+
+#define BZ_OK                0
+#define BZ_RUN_OK            1
+#define BZ_FLUSH_OK          2
+#define BZ_FINISH_OK         3
+#define BZ_STREAM_END        4
+#define BZ_SEQUENCE_ERROR    (-1)
+#define BZ_PARAM_ERROR       (-2)
+#define BZ_MEM_ERROR         (-3)
+#define BZ_DATA_ERROR        (-4)
+#define BZ_DATA_ERROR_MAGIC  (-5)
+#define BZ_IO_ERROR          (-6)
+#define BZ_UNEXPECTED_EOF    (-7)
+#define BZ_OUTBUFF_FULL      (-8)
+#define BZ_CONFIG_ERROR      (-9)
+
+typedef 
+   struct {
+      char *next_in;
+      unsigned int avail_in;
+      unsigned int total_in_lo32;
+      unsigned int total_in_hi32;
+
+      char *next_out;
+      unsigned int avail_out;
+      unsigned int total_out_lo32;
+      unsigned int total_out_hi32;
+
+      void *state;
+
+      void *(*bzalloc)(void *,int,int);
+      void (*bzfree)(void *,void *);
+      void *opaque;
+   } 
+   bz_stream;
+
+
+#ifndef BZ_IMPORT
+#define BZ_EXPORT
+#endif
+
+#ifndef BZ_NO_STDIO
+/* Need a definitition for FILE */
+#include <stdio.h>
+#endif
+
+#ifdef _WIN32
+#   include <windows.h>
+#   ifdef small
+      /* windows.h define small to char */
+#      undef small
+#   endif
+#   ifdef BZ_EXPORT
+#   define BZ_API(func) WINAPI func
+#   define BZ_EXTERN extern
+#   else
+   /* import windows dll dynamically */
+#   define BZ_API(func) (WINAPI * func)
+#   define BZ_EXTERN
+#   endif
+#else
+#   define BZ_API(func) func
+#   define BZ_EXTERN extern
+#endif
+
+
+/*-- Core (low-level) library functions --*/
+
+BZ_EXTERN int BZ_API(BZ2_bzCompressInit) ( 
+      bz_stream* strm, 
+      int        blockSize100k, 
+      int        verbosity, 
+      int        workFactor 
+   );
+
+BZ_EXTERN int BZ_API(BZ2_bzCompress) ( 
+      bz_stream* strm, 
+      int action 
+   );
+
+BZ_EXTERN int BZ_API(BZ2_bzCompressEnd) ( 
+      bz_stream* strm 
+   );
+
+BZ_EXTERN int BZ_API(BZ2_bzDecompressInit) ( 
+      bz_stream *strm, 
+      int       verbosity, 
+      int       small
+   );
+
+BZ_EXTERN int BZ_API(BZ2_bzDecompress) ( 
+      bz_stream* strm 
+   );
+
+BZ_EXTERN int BZ_API(BZ2_bzDecompressEnd) ( 
+      bz_stream *strm 
+   );
+
+
+
+/*-- High(er) level library functions --*/
+
+#ifndef BZ_NO_STDIO
+#define BZ_MAX_UNUSED 5000
+
+typedef void BZFILE;
+
+BZ_EXTERN BZFILE* BZ_API(BZ2_bzReadOpen) ( 
+      int*  bzerror,   
+      FILE* f, 
+      int   verbosity, 
+      int   small,
+      void* unused,    
+      int   nUnused 
+   );
+
+BZ_EXTERN void BZ_API(BZ2_bzReadClose) ( 
+      int*    bzerror, 
+      BZFILE* b 
+   );
+
+BZ_EXTERN void BZ_API(BZ2_bzReadGetUnused) ( 
+      int*    bzerror, 
+      BZFILE* b, 
+      void**  unused,  
+      int*    nUnused 
+   );
+
+BZ_EXTERN int BZ_API(BZ2_bzRead) ( 
+      int*    bzerror, 
+      BZFILE* b, 
+      void*   buf, 
+      int     len 
+   );
+
+BZ_EXTERN BZFILE* BZ_API(BZ2_bzWriteOpen) ( 
+      int*  bzerror,      
+      FILE* f, 
+      int   blockSize100k, 
+      int   verbosity, 
+      int   workFactor 
+   );
+
+BZ_EXTERN void BZ_API(BZ2_bzWrite) ( 
+      int*    bzerror, 
+      BZFILE* b, 
+      void*   buf, 
+      int     len 
+   );
+
+BZ_EXTERN void BZ_API(BZ2_bzWriteClose) ( 
+      int*          bzerror, 
+      BZFILE*       b, 
+      int           abandon, 
+      unsigned int* nbytes_in, 
+      unsigned int* nbytes_out 
+   );
+
+BZ_EXTERN void BZ_API(BZ2_bzWriteClose64) ( 
+      int*          bzerror, 
+      BZFILE*       b, 
+      int           abandon, 
+      unsigned int* nbytes_in_lo32, 
+      unsigned int* nbytes_in_hi32, 
+      unsigned int* nbytes_out_lo32, 
+      unsigned int* nbytes_out_hi32
+   );
+#endif
+
+
+/*-- Utility functions --*/
+
+BZ_EXTERN int BZ_API(BZ2_bzBuffToBuffCompress) ( 
+      char*         dest, 
+      unsigned int* destLen,
+      char*         source, 
+      unsigned int  sourceLen,
+      int           blockSize100k, 
+      int           verbosity, 
+      int           workFactor 
+   );
+
+BZ_EXTERN int BZ_API(BZ2_bzBuffToBuffDecompress) ( 
+      char*         dest, 
+      unsigned int* destLen,
+      char*         source, 
+      unsigned int  sourceLen,
+      int           small, 
+      int           verbosity 
+   );
+
+
+/*--
+   Code contributed by Yoshioka Tsuneo (tsuneo@rr.iij4u.or.jp)
+   to support better zlib compatibility.
+   This code is not _officially_ part of libbzip2 (yet);
+   I haven't tested it, documented it, or considered the
+   threading-safeness of it.
+   If this code breaks, please contact both Yoshioka and me.
+--*/
+
+BZ_EXTERN const char * BZ_API(BZ2_bzlibVersion) (
+      void
+   );
+
+#ifndef BZ_NO_STDIO
+BZ_EXTERN BZFILE * BZ_API(BZ2_bzopen) (
+      const char *path,
+      const char *mode
+   );
+
+BZ_EXTERN BZFILE * BZ_API(BZ2_bzdopen) (
+      int        fd,
+      const char *mode
+   );
+         
+BZ_EXTERN int BZ_API(BZ2_bzread) (
+      BZFILE* b, 
+      void* buf, 
+      int len 
+   );
+
+BZ_EXTERN int BZ_API(BZ2_bzwrite) (
+      BZFILE* b, 
+      void*   buf, 
+      int     len 
+   );
+
+BZ_EXTERN int BZ_API(BZ2_bzflush) (
+      BZFILE* b
+   );
+
+BZ_EXTERN void BZ_API(BZ2_bzclose) (
+      BZFILE* b
+   );
+
+BZ_EXTERN const char * BZ_API(BZ2_bzerror) (
+      BZFILE *b, 
+      int    *errnum
+   );
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+/*-------------------------------------------------------------*/
+/*--- end                                           bzlib.h ---*/
+/*-------------------------------------------------------------*/
diff --git a/Utilities/cmbzip2/bzlib_private.h b/Utilities/cmbzip2/bzlib_private.h
new file mode 100644
index 0000000000..23427879b1
--- /dev/null
+++ b/Utilities/cmbzip2/bzlib_private.h
@@ -0,0 +1,509 @@
+
+/*-------------------------------------------------------------*/
+/*--- Private header file for the library.                  ---*/
+/*---                                       bzlib_private.h ---*/
+/*-------------------------------------------------------------*/
+
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
+
+   bzip2/libbzip2 version 1.0.5 of 10 December 2007
+   Copyright (C) 1996-2007 Julian Seward <jseward@bzip.org>
+
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
+
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
+
+
+#ifndef _BZLIB_PRIVATE_H
+#define _BZLIB_PRIVATE_H
+
+#include <stdlib.h>
+
+#ifndef BZ_NO_STDIO
+#include <stdio.h>
+#include <ctype.h>
+#include <string.h>
+#endif
+
+#include "bzlib.h"
+
+
+
+/*-- General stuff. --*/
+
+#define BZ_VERSION  "1.0.5, 10-Dec-2007"
+
+typedef char            Char;
+typedef unsigned char   Bool;
+typedef unsigned char   UChar;
+typedef int             Int32;
+typedef unsigned int    UInt32;
+typedef short           Int16;
+typedef unsigned short  UInt16;
+
+#define True  ((Bool)1)
+#define False ((Bool)0)
+
+#ifndef __GNUC__
+#define __inline__  /* */
+#endif 
+
+#ifndef BZ_NO_STDIO
+
+extern void BZ2_bz__AssertH__fail ( int errcode );
+#define AssertH(cond,errcode) \
+   { if (!(cond)) BZ2_bz__AssertH__fail ( errcode ); }
+
+#if BZ_DEBUG
+#define AssertD(cond,msg) \
+   { if (!(cond)) {       \
+      fprintf ( stderr,   \
+        "\n\nlibbzip2(debug build): internal error\n\t%s\n", msg );\
+      exit(1); \
+   }}
+#else
+#define AssertD(cond,msg) /* */
+#endif
+
+#define VPrintf0(zf) \
+   fprintf(stderr,zf)
+#define VPrintf1(zf,za1) \
+   fprintf(stderr,zf,za1)
+#define VPrintf2(zf,za1,za2) \
+   fprintf(stderr,zf,za1,za2)
+#define VPrintf3(zf,za1,za2,za3) \
+   fprintf(stderr,zf,za1,za2,za3)
+#define VPrintf4(zf,za1,za2,za3,za4) \
+   fprintf(stderr,zf,za1,za2,za3,za4)
+#define VPrintf5(zf,za1,za2,za3,za4,za5) \
+   fprintf(stderr,zf,za1,za2,za3,za4,za5)
+
+#else
+
+extern void bz_internal_error ( int errcode );
+#define AssertH(cond,errcode) \
+   { if (!(cond)) bz_internal_error ( errcode ); }
+#define AssertD(cond,msg)                do { } while (0)
+#define VPrintf0(zf)                     do { } while (0)
+#define VPrintf1(zf,za1)                 do { } while (0)
+#define VPrintf2(zf,za1,za2)             do { } while (0)
+#define VPrintf3(zf,za1,za2,za3)         do { } while (0)
+#define VPrintf4(zf,za1,za2,za3,za4)     do { } while (0)
+#define VPrintf5(zf,za1,za2,za3,za4,za5) do { } while (0)
+
+#endif
+
+
+#define BZALLOC(nnn) (strm->bzalloc)(strm->opaque,(nnn),1)
+#define BZFREE(ppp)  (strm->bzfree)(strm->opaque,(ppp))
+
+
+/*-- Header bytes. --*/
+
+#define BZ_HDR_B 0x42   /* 'B' */
+#define BZ_HDR_Z 0x5a   /* 'Z' */
+#define BZ_HDR_h 0x68   /* 'h' */
+#define BZ_HDR_0 0x30   /* '0' */
+  
+/*-- Constants for the back end. --*/
+
+#define BZ_MAX_ALPHA_SIZE 258
+#define BZ_MAX_CODE_LEN    23
+
+#define BZ_RUNA 0
+#define BZ_RUNB 1
+
+#define BZ_N_GROUPS 6
+#define BZ_G_SIZE   50
+#define BZ_N_ITERS  4
+
+#define BZ_MAX_SELECTORS (2 + (900000 / BZ_G_SIZE))
+
+
+
+/*-- Stuff for randomising repetitive blocks. --*/
+
+extern Int32 BZ2_rNums[512];
+
+#define BZ_RAND_DECLS                          \
+   Int32 rNToGo;                               \
+   Int32 rTPos                                 \
+
+#define BZ_RAND_INIT_MASK                      \
+   s->rNToGo = 0;                              \
+   s->rTPos  = 0                               \
+
+#define BZ_RAND_MASK ((s->rNToGo == 1) ? 1 : 0)
+
+#define BZ_RAND_UPD_MASK                       \
+   if (s->rNToGo == 0) {                       \
+      s->rNToGo = BZ2_rNums[s->rTPos];         \
+      s->rTPos++;                              \
+      if (s->rTPos == 512) s->rTPos = 0;       \
+   }                                           \
+   s->rNToGo--;
+
+
+
+/*-- Stuff for doing CRCs. --*/
+
+extern UInt32 BZ2_crc32Table[256];
+
+#define BZ_INITIALISE_CRC(crcVar)              \
+{                                              \
+   crcVar = 0xffffffffL;                       \
+}
+
+#define BZ_FINALISE_CRC(crcVar)                \
+{                                              \
+   crcVar = ~(crcVar);                         \
+}
+
+#define BZ_UPDATE_CRC(crcVar,cha)              \
+{                                              \
+   crcVar = (crcVar << 8) ^                    \
+            BZ2_crc32Table[(crcVar >> 24) ^    \
+                           ((UChar)cha)];      \
+}
+
+
+
+/*-- States and modes for compression. --*/
+
+#define BZ_M_IDLE      1
+#define BZ_M_RUNNING   2
+#define BZ_M_FLUSHING  3
+#define BZ_M_FINISHING 4
+
+#define BZ_S_OUTPUT    1
+#define BZ_S_INPUT     2
+
+#define BZ_N_RADIX 2
+#define BZ_N_QSORT 12
+#define BZ_N_SHELL 18
+#define BZ_N_OVERSHOOT (BZ_N_RADIX + BZ_N_QSORT + BZ_N_SHELL + 2)
+
+
+
+
+/*-- Structure holding all the compression-side stuff. --*/
+
+typedef
+   struct {
+      /* pointer back to the struct bz_stream */
+      bz_stream* strm;
+
+      /* mode this stream is in, and whether inputting */
+      /* or outputting data */
+      Int32    mode;
+      Int32    state;
+
+      /* remembers avail_in when flush/finish requested */
+      UInt32   avail_in_expect;
+
+      /* for doing the block sorting */
+      UInt32*  arr1;
+      UInt32*  arr2;
+      UInt32*  ftab;
+      Int32    origPtr;
+
+      /* aliases for arr1 and arr2 */
+      UInt32*  ptr;
+      UChar*   block;
+      UInt16*  mtfv;
+      UChar*   zbits;
+
+      /* for deciding when to use the fallback sorting algorithm */
+      Int32    workFactor;
+
+      /* run-length-encoding of the input */
+      UInt32   state_in_ch;
+      Int32    state_in_len;
+      BZ_RAND_DECLS;
+
+      /* input and output limits and current posns */
+      Int32    nblock;
+      Int32    nblockMAX;
+      Int32    numZ;
+      Int32    state_out_pos;
+
+      /* map of bytes used in block */
+      Int32    nInUse;
+      Bool     inUse[256];
+      UChar    unseqToSeq[256];
+
+      /* the buffer for bit stream creation */
+      UInt32   bsBuff;
+      Int32    bsLive;
+
+      /* block and combined CRCs */
+      UInt32   blockCRC;
+      UInt32   combinedCRC;
+
+      /* misc administratium */
+      Int32    verbosity;
+      Int32    blockNo;
+      Int32    blockSize100k;
+
+      /* stuff for coding the MTF values */
+      Int32    nMTF;
+      Int32    mtfFreq    [BZ_MAX_ALPHA_SIZE];
+      UChar    selector   [BZ_MAX_SELECTORS];
+      UChar    selectorMtf[BZ_MAX_SELECTORS];
+
+      UChar    len     [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
+      Int32    code    [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
+      Int32    rfreq   [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
+      /* second dimension: only 3 needed; 4 makes index calculations faster */
+      UInt32   len_pack[BZ_MAX_ALPHA_SIZE][4];
+
+   }
+   EState;
+
+
+
+/*-- externs for compression. --*/
+
+extern void 
+BZ2_blockSort ( EState* );
+
+extern void 
+BZ2_compressBlock ( EState*, Bool );
+
+extern void 
+BZ2_bsInitWrite ( EState* );
+
+extern void 
+BZ2_hbAssignCodes ( Int32*, UChar*, Int32, Int32, Int32 );
+
+extern void 
+BZ2_hbMakeCodeLengths ( UChar*, Int32*, Int32, Int32 );
+
+
+
+/*-- states for decompression. --*/
+
+#define BZ_X_IDLE        1
+#define BZ_X_OUTPUT      2
+
+#define BZ_X_MAGIC_1     10
+#define BZ_X_MAGIC_2     11
+#define BZ_X_MAGIC_3     12
+#define BZ_X_MAGIC_4     13
+#define BZ_X_BLKHDR_1    14
+#define BZ_X_BLKHDR_2    15
+#define BZ_X_BLKHDR_3    16
+#define BZ_X_BLKHDR_4    17
+#define BZ_X_BLKHDR_5    18
+#define BZ_X_BLKHDR_6    19
+#define BZ_X_BCRC_1      20
+#define BZ_X_BCRC_2      21
+#define BZ_X_BCRC_3      22
+#define BZ_X_BCRC_4      23
+#define BZ_X_RANDBIT     24
+#define BZ_X_ORIGPTR_1   25
+#define BZ_X_ORIGPTR_2   26
+#define BZ_X_ORIGPTR_3   27
+#define BZ_X_MAPPING_1   28
+#define BZ_X_MAPPING_2   29
+#define BZ_X_SELECTOR_1  30
+#define BZ_X_SELECTOR_2  31
+#define BZ_X_SELECTOR_3  32
+#define BZ_X_CODING_1    33
+#define BZ_X_CODING_2    34
+#define BZ_X_CODING_3    35
+#define BZ_X_MTF_1       36
+#define BZ_X_MTF_2       37
+#define BZ_X_MTF_3       38
+#define BZ_X_MTF_4       39
+#define BZ_X_MTF_5       40
+#define BZ_X_MTF_6       41
+#define BZ_X_ENDHDR_2    42
+#define BZ_X_ENDHDR_3    43
+#define BZ_X_ENDHDR_4    44
+#define BZ_X_ENDHDR_5    45
+#define BZ_X_ENDHDR_6    46
+#define BZ_X_CCRC_1      47
+#define BZ_X_CCRC_2      48
+#define BZ_X_CCRC_3      49
+#define BZ_X_CCRC_4      50
+
+
+
+/*-- Constants for the fast MTF decoder. --*/
+
+#define MTFA_SIZE 4096
+#define MTFL_SIZE 16
+
+
+
+/*-- Structure holding all the decompression-side stuff. --*/
+
+typedef
+   struct {
+      /* pointer back to the struct bz_stream */
+      bz_stream* strm;
+
+      /* state indicator for this stream */
+      Int32    state;
+
+      /* for doing the final run-length decoding */
+      UChar    state_out_ch;
+      Int32    state_out_len;
+      Bool     blockRandomised;
+      BZ_RAND_DECLS;
+
+      /* the buffer for bit stream reading */
+      UInt32   bsBuff;
+      Int32    bsLive;
+
+      /* misc administratium */
+      Int32    blockSize100k;
+      Bool     smallDecompress;
+      Int32    currBlockNo;
+      Int32    verbosity;
+
+      /* for undoing the Burrows-Wheeler transform */
+      Int32    origPtr;
+      UInt32   tPos;
+      Int32    k0;
+      Int32    unzftab[256];
+      Int32    nblock_used;
+      Int32    cftab[257];
+      Int32    cftabCopy[257];
+
+      /* for undoing the Burrows-Wheeler transform (FAST) */
+      UInt32   *tt;
+
+      /* for undoing the Burrows-Wheeler transform (SMALL) */
+      UInt16   *ll16;
+      UChar    *ll4;
+
+      /* stored and calculated CRCs */
+      UInt32   storedBlockCRC;
+      UInt32   storedCombinedCRC;
+      UInt32   calculatedBlockCRC;
+      UInt32   calculatedCombinedCRC;
+
+      /* map of bytes used in block */
+      Int32    nInUse;
+      Bool     inUse[256];
+      Bool     inUse16[16];
+      UChar    seqToUnseq[256];
+
+      /* for decoding the MTF values */
+      UChar    mtfa   [MTFA_SIZE];
+      Int32    mtfbase[256 / MTFL_SIZE];
+      UChar    selector   [BZ_MAX_SELECTORS];
+      UChar    selectorMtf[BZ_MAX_SELECTORS];
+      UChar    len  [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
+
+      Int32    limit  [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
+      Int32    base   [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
+      Int32    perm   [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
+      Int32    minLens[BZ_N_GROUPS];
+
+      /* save area for scalars in the main decompress code */
+      Int32    save_i;
+      Int32    save_j;
+      Int32    save_t;
+      Int32    save_alphaSize;
+      Int32    save_nGroups;
+      Int32    save_nSelectors;
+      Int32    save_EOB;
+      Int32    save_groupNo;
+      Int32    save_groupPos;
+      Int32    save_nextSym;
+      Int32    save_nblockMAX;
+      Int32    save_nblock;
+      Int32    save_es;
+      Int32    save_N;
+      Int32    save_curr;
+      Int32    save_zt;
+      Int32    save_zn; 
+      Int32    save_zvec;
+      Int32    save_zj;
+      Int32    save_gSel;
+      Int32    save_gMinlen;
+      Int32*   save_gLimit;
+      Int32*   save_gBase;
+      Int32*   save_gPerm;
+
+   }
+   DState;
+
+
+
+/*-- Macros for decompression. --*/
+
+#define BZ_GET_FAST(cccc)                     \
+    /* c_tPos is unsigned, hence test < 0 is pointless. */ \
+    if (s->tPos >= (UInt32)100000 * (UInt32)s->blockSize100k) return True; \
+    s->tPos = s->tt[s->tPos];                 \
+    cccc = (UChar)(s->tPos & 0xff);           \
+    s->tPos >>= 8;
+
+#define BZ_GET_FAST_C(cccc)                   \
+    /* c_tPos is unsigned, hence test < 0 is pointless. */ \
+    if (c_tPos >= (UInt32)100000 * (UInt32)ro_blockSize100k) return True; \
+    c_tPos = c_tt[c_tPos];                    \
+    cccc = (UChar)(c_tPos & 0xff);            \
+    c_tPos >>= 8;
+
+#define SET_LL4(i,n)                                          \
+   { if (((i) & 0x1) == 0)                                    \
+        s->ll4[(i) >> 1] = (s->ll4[(i) >> 1] & 0xf0) | (n); else    \
+        s->ll4[(i) >> 1] = (s->ll4[(i) >> 1] & 0x0f) | ((n) << 4);  \
+   }
+
+#define GET_LL4(i)                             \
+   ((((UInt32)(s->ll4[(i) >> 1])) >> (((i) << 2) & 0x4)) & 0xF)
+
+#define SET_LL(i,n)                          \
+   { s->ll16[i] = (UInt16)(n & 0x0000ffff);  \
+     SET_LL4(i, n >> 16);                    \
+   }
+
+#define GET_LL(i) \
+   (((UInt32)s->ll16[i]) | (GET_LL4(i) << 16))
+
+#define BZ_GET_SMALL(cccc)                            \
+    /* c_tPos is unsigned, hence test < 0 is pointless. */ \
+    if (s->tPos >= (UInt32)100000 * (UInt32)s->blockSize100k) return True; \
+    cccc = BZ2_indexIntoF ( s->tPos, s->cftab );    \
+    s->tPos = GET_LL(s->tPos);
+
+
+/*-- externs for decompression. --*/
+
+extern Int32 
+BZ2_indexIntoF ( Int32, Int32* );
+
+extern Int32 
+BZ2_decompress ( DState* );
+
+extern void 
+BZ2_hbCreateDecodeTables ( Int32*, Int32*, Int32*, UChar*,
+                           Int32,  Int32, Int32 );
+
+
+#endif
+
+
+/*-- BZ_NO_STDIO seems to make NULL disappear on some platforms. --*/
+
+#ifdef BZ_NO_STDIO
+#ifndef NULL
+#define NULL 0
+#endif
+#endif
+
+
+/*-------------------------------------------------------------*/
+/*--- end                                   bzlib_private.h ---*/
+/*-------------------------------------------------------------*/
diff --git a/Utilities/cmbzip2/compress.c b/Utilities/cmbzip2/compress.c
new file mode 100644
index 0000000000..8c80a07970
--- /dev/null
+++ b/Utilities/cmbzip2/compress.c
@@ -0,0 +1,672 @@
+
+/*-------------------------------------------------------------*/
+/*--- Compression machinery (not incl block sorting)        ---*/
+/*---                                            compress.c ---*/
+/*-------------------------------------------------------------*/
+
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
+
+   bzip2/libbzip2 version 1.0.5 of 10 December 2007
+   Copyright (C) 1996-2007 Julian Seward <jseward@bzip.org>
+
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
+
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
+
+
+/* CHANGES
+    0.9.0    -- original version.
+    0.9.0a/b -- no changes in this file.
+    0.9.0c   -- changed setting of nGroups in sendMTFValues() 
+                so as to do a bit better on small files
+*/
+
+#include "bzlib_private.h"
+
+
+/*---------------------------------------------------*/
+/*--- Bit stream I/O                              ---*/
+/*---------------------------------------------------*/
+
+/*---------------------------------------------------*/
+void BZ2_bsInitWrite ( EState* s )
+{
+   s->bsLive = 0;
+   s->bsBuff = 0;
+}
+
+
+/*---------------------------------------------------*/
+static
+void bsFinishWrite ( EState* s )
+{
+   while (s->bsLive > 0) {
+      s->zbits[s->numZ] = (UChar)(s->bsBuff >> 24);
+      s->numZ++;
+      s->bsBuff <<= 8;
+      s->bsLive -= 8;
+   }
+}
+
+
+/*---------------------------------------------------*/
+#define bsNEEDW(nz)                           \
+{                                             \
+   while (s->bsLive >= 8) {                   \
+      s->zbits[s->numZ]                       \
+         = (UChar)(s->bsBuff >> 24);          \
+      s->numZ++;                              \
+      s->bsBuff <<= 8;                        \
+      s->bsLive -= 8;                         \
+   }                                          \
+}
+
+
+/*---------------------------------------------------*/
+static
+__inline__
+void bsW ( EState* s, Int32 n, UInt32 v )
+{
+   bsNEEDW ( n );
+   s->bsBuff |= (v << (32 - s->bsLive - n));
+   s->bsLive += n;
+}
+
+
+/*---------------------------------------------------*/
+static
+void bsPutUInt32 ( EState* s, UInt32 u )
+{
+   bsW ( s, 8, (u >> 24) & 0xffL );
+   bsW ( s, 8, (u >> 16) & 0xffL );
+   bsW ( s, 8, (u >>  8) & 0xffL );
+   bsW ( s, 8,  u        & 0xffL );
+}
+
+
+/*---------------------------------------------------*/
+static
+void bsPutUChar ( EState* s, UChar c )
+{
+   bsW( s, 8, (UInt32)c );
+}
+
+
+/*---------------------------------------------------*/
+/*--- The back end proper                         ---*/
+/*---------------------------------------------------*/
+
+/*---------------------------------------------------*/
+static
+void makeMaps_e ( EState* s )
+{
+   Int32 i;
+   s->nInUse = 0;
+   for (i = 0; i < 256; i++)
+      if (s->inUse[i]) {
+         s->unseqToSeq[i] = s->nInUse;
+         s->nInUse++;
+      }
+}
+
+
+/*---------------------------------------------------*/
+static
+void generateMTFValues ( EState* s )
+{
+   UChar   yy[256];
+   Int32   i, j;
+   Int32   zPend;
+   Int32   wr;
+   Int32   EOB;
+
+   /* 
+      After sorting (eg, here),
+         s->arr1 [ 0 .. s->nblock-1 ] holds sorted order,
+         and
+         ((UChar*)s->arr2) [ 0 .. s->nblock-1 ] 
+         holds the original block data.
+
+      The first thing to do is generate the MTF values,
+      and put them in
+         ((UInt16*)s->arr1) [ 0 .. s->nblock-1 ].
+      Because there are strictly fewer or equal MTF values
+      than block values, ptr values in this area are overwritten
+      with MTF values only when they are no longer needed.
+
+      The final compressed bitstream is generated into the
+      area starting at
+         (UChar*) (&((UChar*)s->arr2)[s->nblock])
+
+      These storage aliases are set up in bzCompressInit(),
+      except for the last one, which is arranged in 
+      compressBlock().
+   */
+   UInt32* ptr   = s->ptr;
+   UChar* block  = s->block;
+   UInt16* mtfv  = s->mtfv;
+
+   makeMaps_e ( s );
+   EOB = s->nInUse+1;
+
+   for (i = 0; i <= EOB; i++) s->mtfFreq[i] = 0;
+
+   wr = 0;
+   zPend = 0;
+   for (i = 0; i < s->nInUse; i++) yy[i] = (UChar) i;
+
+   for (i = 0; i < s->nblock; i++) {
+      UChar ll_i;
+      AssertD ( wr <= i, "generateMTFValues(1)" );
+      j = ptr[i]-1; if (j < 0) j += s->nblock;
+      ll_i = s->unseqToSeq[block[j]];
+      AssertD ( ll_i < s->nInUse, "generateMTFValues(2a)" );
+
+      if (yy[0] == ll_i) { 
+         zPend++;
+      } else {
+
+         if (zPend > 0) {
+            zPend--;
+            while (True) {
+               if (zPend & 1) {
+                  mtfv[wr] = BZ_RUNB; wr++; 
+                  s->mtfFreq[BZ_RUNB]++; 
+               } else {
+                  mtfv[wr] = BZ_RUNA; wr++; 
+                  s->mtfFreq[BZ_RUNA]++; 
+               }
+               if (zPend < 2) break;
+               zPend = (zPend - 2) / 2;
+            };
+            zPend = 0;
+         }
+         {
+            register UChar  rtmp;
+            register UChar* ryy_j;
+            register UChar  rll_i;
+            rtmp  = yy[1];
+            yy[1] = yy[0];
+            ryy_j = &(yy[1]);
+            rll_i = ll_i;
+            while ( rll_i != rtmp ) {
+               register UChar rtmp2;
+               ryy_j++;
+               rtmp2  = rtmp;
+               rtmp   = *ryy_j;
+               *ryy_j = rtmp2;
+            };
+            yy[0] = rtmp;
+            j = ryy_j - &(yy[0]);
+            mtfv[wr] = j+1; wr++; s->mtfFreq[j+1]++;
+         }
+
+      }
+   }
+
+   if (zPend > 0) {
+      zPend--;
+      while (True) {
+         if (zPend & 1) {
+            mtfv[wr] = BZ_RUNB; wr++; 
+            s->mtfFreq[BZ_RUNB]++; 
+         } else {
+            mtfv[wr] = BZ_RUNA; wr++; 
+            s->mtfFreq[BZ_RUNA]++; 
+         }
+         if (zPend < 2) break;
+         zPend = (zPend - 2) / 2;
+      };
+      zPend = 0;
+   }
+
+   mtfv[wr] = EOB; wr++; s->mtfFreq[EOB]++;
+
+   s->nMTF = wr;
+}
+
+
+/*---------------------------------------------------*/
+#define BZ_LESSER_ICOST  0
+#define BZ_GREATER_ICOST 15
+
+static
+void sendMTFValues ( EState* s )
+{
+   Int32 v, t, i, j, gs, ge, totc, bt, bc, iter;
+   Int32 nSelectors, alphaSize, minLen, maxLen, selCtr;
+   Int32 nGroups, nBytes;
+
+   /*--
+   UChar  len [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
+   is a global since the decoder also needs it.
+
+   Int32  code[BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
+   Int32  rfreq[BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
+   are also globals only used in this proc.
+   Made global to keep stack frame size small.
+   --*/
+
+
+   UInt16 cost[BZ_N_GROUPS];
+   Int32  fave[BZ_N_GROUPS];
+
+   UInt16* mtfv = s->mtfv;
+
+   if (s->verbosity >= 3)
+      VPrintf3( "      %d in block, %d after MTF & 1-2 coding, "
+                "%d+2 syms in use\n", 
+                s->nblock, s->nMTF, s->nInUse );
+
+   alphaSize = s->nInUse+2;
+   for (t = 0; t < BZ_N_GROUPS; t++)
+      for (v = 0; v < alphaSize; v++)
+         s->len[t][v] = BZ_GREATER_ICOST;
+
+   /*--- Decide how many coding tables to use ---*/
+   AssertH ( s->nMTF > 0, 3001 );
+   if (s->nMTF < 200)  nGroups = 2; else
+   if (s->nMTF < 600)  nGroups = 3; else
+   if (s->nMTF < 1200) nGroups = 4; else
+   if (s->nMTF < 2400) nGroups = 5; else
+                       nGroups = 6;
+
+   /*--- Generate an initial set of coding tables ---*/
+   { 
+      Int32 nPart, remF, tFreq, aFreq;
+
+      nPart = nGroups;
+      remF  = s->nMTF;
+      gs = 0;
+      while (nPart > 0) {
+         tFreq = remF / nPart;
+         ge = gs-1;
+         aFreq = 0;
+         while (aFreq < tFreq && ge < alphaSize-1) {
+            ge++;
+            aFreq += s->mtfFreq[ge];
+         }
+
+         if (ge > gs 
+             && nPart != nGroups && nPart != 1 
+             && ((nGroups-nPart) % 2 == 1)) {
+            aFreq -= s->mtfFreq[ge];
+            ge--;
+         }
+
+         if (s->verbosity >= 3)
+            VPrintf5( "      initial group %d, [%d .. %d], "
+                      "has %d syms (%4.1f%%)\n",
+                      nPart, gs, ge, aFreq, 
+                      (100.0 * (float)aFreq) / (float)(s->nMTF) );
+ 
+         for (v = 0; v < alphaSize; v++)
+            if (v >= gs && v <= ge) 
+               s->len[nPart-1][v] = BZ_LESSER_ICOST; else
+               s->len[nPart-1][v] = BZ_GREATER_ICOST;
+ 
+         nPart--;
+         gs = ge+1;
+         remF -= aFreq;
+      }
+   }
+
+   /*--- 
+      Iterate up to BZ_N_ITERS times to improve the tables.
+   ---*/
+   for (iter = 0; iter < BZ_N_ITERS; iter++) {
+
+      for (t = 0; t < nGroups; t++) fave[t] = 0;
+
+      for (t = 0; t < nGroups; t++)
+         for (v = 0; v < alphaSize; v++)
+            s->rfreq[t][v] = 0;
+
+      /*---
+        Set up an auxiliary length table which is used to fast-track
+	the common case (nGroups == 6). 
+      ---*/
+      if (nGroups == 6) {
+         for (v = 0; v < alphaSize; v++) {
+            s->len_pack[v][0] = (s->len[1][v] << 16) | s->len[0][v];
+            s->len_pack[v][1] = (s->len[3][v] << 16) | s->len[2][v];
+            s->len_pack[v][2] = (s->len[5][v] << 16) | s->len[4][v];
+	 }
+      }
+
+      nSelectors = 0;
+      totc = 0;
+      gs = 0;
+      while (True) {
+
+         /*--- Set group start & end marks. --*/
+         if (gs >= s->nMTF) break;
+         ge = gs + BZ_G_SIZE - 1; 
+         if (ge >= s->nMTF) ge = s->nMTF-1;
+
+         /*-- 
+            Calculate the cost of this group as coded
+            by each of the coding tables.
+         --*/
+         for (t = 0; t < nGroups; t++) cost[t] = 0;
+
+         if (nGroups == 6 && 50 == ge-gs+1) {
+            /*--- fast track the common case ---*/
+            register UInt32 cost01, cost23, cost45;
+            register UInt16 icv;
+            cost01 = cost23 = cost45 = 0;
+
+#           define BZ_ITER(nn)                \
+               icv = mtfv[gs+(nn)];           \
+               cost01 += s->len_pack[icv][0]; \
+               cost23 += s->len_pack[icv][1]; \
+               cost45 += s->len_pack[icv][2]; \
+
+            BZ_ITER(0);  BZ_ITER(1);  BZ_ITER(2);  BZ_ITER(3);  BZ_ITER(4);
+            BZ_ITER(5);  BZ_ITER(6);  BZ_ITER(7);  BZ_ITER(8);  BZ_ITER(9);
+            BZ_ITER(10); BZ_ITER(11); BZ_ITER(12); BZ_ITER(13); BZ_ITER(14);
+            BZ_ITER(15); BZ_ITER(16); BZ_ITER(17); BZ_ITER(18); BZ_ITER(19);
+            BZ_ITER(20); BZ_ITER(21); BZ_ITER(22); BZ_ITER(23); BZ_ITER(24);
+            BZ_ITER(25); BZ_ITER(26); BZ_ITER(27); BZ_ITER(28); BZ_ITER(29);
+            BZ_ITER(30); BZ_ITER(31); BZ_ITER(32); BZ_ITER(33); BZ_ITER(34);
+            BZ_ITER(35); BZ_ITER(36); BZ_ITER(37); BZ_ITER(38); BZ_ITER(39);
+            BZ_ITER(40); BZ_ITER(41); BZ_ITER(42); BZ_ITER(43); BZ_ITER(44);
+            BZ_ITER(45); BZ_ITER(46); BZ_ITER(47); BZ_ITER(48); BZ_ITER(49);
+
+#           undef BZ_ITER
+
+            cost[0] = cost01 & 0xffff; cost[1] = cost01 >> 16;
+            cost[2] = cost23 & 0xffff; cost[3] = cost23 >> 16;
+            cost[4] = cost45 & 0xffff; cost[5] = cost45 >> 16;
+
+         } else {
+	    /*--- slow version which correctly handles all situations ---*/
+            for (i = gs; i <= ge; i++) { 
+               UInt16 icv = mtfv[i];
+               for (t = 0; t < nGroups; t++) cost[t] += s->len[t][icv];
+            }
+         }
+ 
+         /*-- 
+            Find the coding table which is best for this group,
+            and record its identity in the selector table.
+         --*/
+         bc = 999999999; bt = -1;
+         for (t = 0; t < nGroups; t++)
+            if (cost[t] < bc) { bc = cost[t]; bt = t; };
+         totc += bc;
+         fave[bt]++;
+         s->selector[nSelectors] = bt;
+         nSelectors++;
+
+         /*-- 
+            Increment the symbol frequencies for the selected table.
+          --*/
+         if (nGroups == 6 && 50 == ge-gs+1) {
+            /*--- fast track the common case ---*/
+
+#           define BZ_ITUR(nn) s->rfreq[bt][ mtfv[gs+(nn)] ]++
+
+            BZ_ITUR(0);  BZ_ITUR(1);  BZ_ITUR(2);  BZ_ITUR(3);  BZ_ITUR(4);
+            BZ_ITUR(5);  BZ_ITUR(6);  BZ_ITUR(7);  BZ_ITUR(8);  BZ_ITUR(9);
+            BZ_ITUR(10); BZ_ITUR(11); BZ_ITUR(12); BZ_ITUR(13); BZ_ITUR(14);
+            BZ_ITUR(15); BZ_ITUR(16); BZ_ITUR(17); BZ_ITUR(18); BZ_ITUR(19);
+            BZ_ITUR(20); BZ_ITUR(21); BZ_ITUR(22); BZ_ITUR(23); BZ_ITUR(24);
+            BZ_ITUR(25); BZ_ITUR(26); BZ_ITUR(27); BZ_ITUR(28); BZ_ITUR(29);
+            BZ_ITUR(30); BZ_ITUR(31); BZ_ITUR(32); BZ_ITUR(33); BZ_ITUR(34);
+            BZ_ITUR(35); BZ_ITUR(36); BZ_ITUR(37); BZ_ITUR(38); BZ_ITUR(39);
+            BZ_ITUR(40); BZ_ITUR(41); BZ_ITUR(42); BZ_ITUR(43); BZ_ITUR(44);
+            BZ_ITUR(45); BZ_ITUR(46); BZ_ITUR(47); BZ_ITUR(48); BZ_ITUR(49);
+
+#           undef BZ_ITUR
+
+         } else {
+	    /*--- slow version which correctly handles all situations ---*/
+            for (i = gs; i <= ge; i++)
+               s->rfreq[bt][ mtfv[i] ]++;
+         }
+
+         gs = ge+1;
+      }
+      if (s->verbosity >= 3) {
+         VPrintf2 ( "      pass %d: size is %d, grp uses are ", 
+                   iter+1, totc/8 );
+         for (t = 0; t < nGroups; t++)
+            VPrintf1 ( "%d ", fave[t] );
+         VPrintf0 ( "\n" );
+      }
+
+      /*--
+        Recompute the tables based on the accumulated frequencies.
+      --*/
+      /* maxLen was changed from 20 to 17 in bzip2-1.0.3.  See 
+         comment in huffman.c for details. */
+      for (t = 0; t < nGroups; t++)
+         BZ2_hbMakeCodeLengths ( &(s->len[t][0]), &(s->rfreq[t][0]), 
+                                 alphaSize, 17 /*20*/ );
+   }
+
+
+   AssertH( nGroups < 8, 3002 );
+   AssertH( nSelectors < 32768 &&
+            nSelectors <= (2 + (900000 / BZ_G_SIZE)),
+            3003 );
+
+
+   /*--- Compute MTF values for the selectors. ---*/
+   {
+      UChar pos[BZ_N_GROUPS], ll_i, tmp2, tmp;
+      for (i = 0; i < nGroups; i++) pos[i] = i;
+      for (i = 0; i < nSelectors; i++) {
+         ll_i = s->selector[i];
+         j = 0;
+         tmp = pos[j];
+         while ( ll_i != tmp ) {
+            j++;
+            tmp2 = tmp;
+            tmp = pos[j];
+            pos[j] = tmp2;
+         };
+         pos[0] = tmp;
+         s->selectorMtf[i] = j;
+      }
+   };
+
+   /*--- Assign actual codes for the tables. --*/
+   for (t = 0; t < nGroups; t++) {
+      minLen = 32;
+      maxLen = 0;
+      for (i = 0; i < alphaSize; i++) {
+         if (s->len[t][i] > maxLen) maxLen = s->len[t][i];
+         if (s->len[t][i] < minLen) minLen = s->len[t][i];
+      }
+      AssertH ( !(maxLen > 17 /*20*/ ), 3004 );
+      AssertH ( !(minLen < 1),  3005 );
+      BZ2_hbAssignCodes ( &(s->code[t][0]), &(s->len[t][0]), 
+                          minLen, maxLen, alphaSize );
+   }
+
+   /*--- Transmit the mapping table. ---*/
+   { 
+      Bool inUse16[16];
+      for (i = 0; i < 16; i++) {
+          inUse16[i] = False;
+          for (j = 0; j < 16; j++)
+             if (s->inUse[i * 16 + j]) inUse16[i] = True;
+      }
+     
+      nBytes = s->numZ;
+      for (i = 0; i < 16; i++)
+         if (inUse16[i]) bsW(s,1,1); else bsW(s,1,0);
+
+      for (i = 0; i < 16; i++)
+         if (inUse16[i])
+            for (j = 0; j < 16; j++) {
+               if (s->inUse[i * 16 + j]) bsW(s,1,1); else bsW(s,1,0);
+            }
+
+      if (s->verbosity >= 3) 
+         VPrintf1( "      bytes: mapping %d, ", s->numZ-nBytes );
+   }
+
+   /*--- Now the selectors. ---*/
+   nBytes = s->numZ;
+   bsW ( s, 3, nGroups );
+   bsW ( s, 15, nSelectors );
+   for (i = 0; i < nSelectors; i++) { 
+      for (j = 0; j < s->selectorMtf[i]; j++) bsW(s,1,1);
+      bsW(s,1,0);
+   }
+   if (s->verbosity >= 3)
+      VPrintf1( "selectors %d, ", s->numZ-nBytes );
+
+   /*--- Now the coding tables. ---*/
+   nBytes = s->numZ;
+
+   for (t = 0; t < nGroups; t++) {
+      Int32 curr = s->len[t][0];
+      bsW ( s, 5, curr );
+      for (i = 0; i < alphaSize; i++) {
+         while (curr < s->len[t][i]) { bsW(s,2,2); curr++; /* 10 */ };
+         while (curr > s->len[t][i]) { bsW(s,2,3); curr--; /* 11 */ };
+         bsW ( s, 1, 0 );
+      }
+   }
+
+   if (s->verbosity >= 3)
+      VPrintf1 ( "code lengths %d, ", s->numZ-nBytes );
+
+   /*--- And finally, the block data proper ---*/
+   nBytes = s->numZ;
+   selCtr = 0;
+   gs = 0;
+   while (True) {
+      if (gs >= s->nMTF) break;
+      ge = gs + BZ_G_SIZE - 1; 
+      if (ge >= s->nMTF) ge = s->nMTF-1;
+      AssertH ( s->selector[selCtr] < nGroups, 3006 );
+
+      if (nGroups == 6 && 50 == ge-gs+1) {
+            /*--- fast track the common case ---*/
+            UInt16 mtfv_i;
+            UChar* s_len_sel_selCtr 
+               = &(s->len[s->selector[selCtr]][0]);
+            Int32* s_code_sel_selCtr
+               = &(s->code[s->selector[selCtr]][0]);
+
+#           define BZ_ITAH(nn)                      \
+               mtfv_i = mtfv[gs+(nn)];              \
+               bsW ( s,                             \
+                     s_len_sel_selCtr[mtfv_i],      \
+                     s_code_sel_selCtr[mtfv_i] )
+
+            BZ_ITAH(0);  BZ_ITAH(1);  BZ_ITAH(2);  BZ_ITAH(3);  BZ_ITAH(4);
+            BZ_ITAH(5);  BZ_ITAH(6);  BZ_ITAH(7);  BZ_ITAH(8);  BZ_ITAH(9);
+            BZ_ITAH(10); BZ_ITAH(11); BZ_ITAH(12); BZ_ITAH(13); BZ_ITAH(14);
+            BZ_ITAH(15); BZ_ITAH(16); BZ_ITAH(17); BZ_ITAH(18); BZ_ITAH(19);
+            BZ_ITAH(20); BZ_ITAH(21); BZ_ITAH(22); BZ_ITAH(23); BZ_ITAH(24);
+            BZ_ITAH(25); BZ_ITAH(26); BZ_ITAH(27); BZ_ITAH(28); BZ_ITAH(29);
+            BZ_ITAH(30); BZ_ITAH(31); BZ_ITAH(32); BZ_ITAH(33); BZ_ITAH(34);
+            BZ_ITAH(35); BZ_ITAH(36); BZ_ITAH(37); BZ_ITAH(38); BZ_ITAH(39);
+            BZ_ITAH(40); BZ_ITAH(41); BZ_ITAH(42); BZ_ITAH(43); BZ_ITAH(44);
+            BZ_ITAH(45); BZ_ITAH(46); BZ_ITAH(47); BZ_ITAH(48); BZ_ITAH(49);
+
+#           undef BZ_ITAH
+
+      } else {
+	 /*--- slow version which correctly handles all situations ---*/
+         for (i = gs; i <= ge; i++) {
+            bsW ( s, 
+                  s->len  [s->selector[selCtr]] [mtfv[i]],
+                  s->code [s->selector[selCtr]] [mtfv[i]] );
+         }
+      }
+
+
+      gs = ge+1;
+      selCtr++;
+   }
+   AssertH( selCtr == nSelectors, 3007 );
+
+   if (s->verbosity >= 3)
+      VPrintf1( "codes %d\n", s->numZ-nBytes );
+}
+
+
+/*---------------------------------------------------*/
+void BZ2_compressBlock ( EState* s, Bool is_last_block )
+{
+   if (s->nblock > 0) {
+
+      BZ_FINALISE_CRC ( s->blockCRC );
+      s->combinedCRC = (s->combinedCRC << 1) | (s->combinedCRC >> 31);
+      s->combinedCRC ^= s->blockCRC;
+      if (s->blockNo > 1) s->numZ = 0;
+
+      if (s->verbosity >= 2)
+         VPrintf4( "    block %d: crc = 0x%08x, "
+                   "combined CRC = 0x%08x, size = %d\n",
+                   s->blockNo, s->blockCRC, s->combinedCRC, s->nblock );
+
+      BZ2_blockSort ( s );
+   }
+
+   s->zbits = (UChar*) (&((UChar*)s->arr2)[s->nblock]);
+
+   /*-- If this is the first block, create the stream header. --*/
+   if (s->blockNo == 1) {
+      BZ2_bsInitWrite ( s );
+      bsPutUChar ( s, BZ_HDR_B );
+      bsPutUChar ( s, BZ_HDR_Z );
+      bsPutUChar ( s, BZ_HDR_h );
+      bsPutUChar ( s, (UChar)(BZ_HDR_0 + s->blockSize100k) );
+   }
+
+   if (s->nblock > 0) {
+
+      bsPutUChar ( s, 0x31 ); bsPutUChar ( s, 0x41 );
+      bsPutUChar ( s, 0x59 ); bsPutUChar ( s, 0x26 );
+      bsPutUChar ( s, 0x53 ); bsPutUChar ( s, 0x59 );
+
+      /*-- Now the block's CRC, so it is in a known place. --*/
+      bsPutUInt32 ( s, s->blockCRC );
+
+      /*-- 
+         Now a single bit indicating (non-)randomisation. 
+         As of version 0.9.5, we use a better sorting algorithm
+         which makes randomisation unnecessary.  So always set
+         the randomised bit to 'no'.  Of course, the decoder
+         still needs to be able to handle randomised blocks
+         so as to maintain backwards compatibility with
+         older versions of bzip2.
+      --*/
+      bsW(s,1,0);
+
+      bsW ( s, 24, s->origPtr );
+      generateMTFValues ( s );
+      sendMTFValues ( s );
+   }
+
+
+   /*-- If this is the last block, add the stream trailer. --*/
+   if (is_last_block) {
+
+      bsPutUChar ( s, 0x17 ); bsPutUChar ( s, 0x72 );
+      bsPutUChar ( s, 0x45 ); bsPutUChar ( s, 0x38 );
+      bsPutUChar ( s, 0x50 ); bsPutUChar ( s, 0x90 );
+      bsPutUInt32 ( s, s->combinedCRC );
+      if (s->verbosity >= 2)
+         VPrintf1( "    final combined CRC = 0x%08x\n   ", s->combinedCRC );
+      bsFinishWrite ( s );
+   }
+}
+
+
+/*-------------------------------------------------------------*/
+/*--- end                                        compress.c ---*/
+/*-------------------------------------------------------------*/
diff --git a/Utilities/cmbzip2/crctable.c b/Utilities/cmbzip2/crctable.c
new file mode 100644
index 0000000000..215687b2c0
--- /dev/null
+++ b/Utilities/cmbzip2/crctable.c
@@ -0,0 +1,104 @@
+
+/*-------------------------------------------------------------*/
+/*--- Table for doing CRCs                                  ---*/
+/*---                                            crctable.c ---*/
+/*-------------------------------------------------------------*/
+
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
+
+   bzip2/libbzip2 version 1.0.5 of 10 December 2007
+   Copyright (C) 1996-2007 Julian Seward <jseward@bzip.org>
+
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
+
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
+
+
+#include "bzlib_private.h"
+
+/*--
+  I think this is an implementation of the AUTODIN-II,
+  Ethernet & FDDI 32-bit CRC standard.  Vaguely derived
+  from code by Rob Warnock, in Section 51 of the
+  comp.compression FAQ.
+--*/
+
+UInt32 BZ2_crc32Table[256] = {
+
+   /*-- Ugly, innit? --*/
+
+   0x00000000L, 0x04c11db7L, 0x09823b6eL, 0x0d4326d9L,
+   0x130476dcL, 0x17c56b6bL, 0x1a864db2L, 0x1e475005L,
+   0x2608edb8L, 0x22c9f00fL, 0x2f8ad6d6L, 0x2b4bcb61L,
+   0x350c9b64L, 0x31cd86d3L, 0x3c8ea00aL, 0x384fbdbdL,
+   0x4c11db70L, 0x48d0c6c7L, 0x4593e01eL, 0x4152fda9L,
+   0x5f15adacL, 0x5bd4b01bL, 0x569796c2L, 0x52568b75L,
+   0x6a1936c8L, 0x6ed82b7fL, 0x639b0da6L, 0x675a1011L,
+   0x791d4014L, 0x7ddc5da3L, 0x709f7b7aL, 0x745e66cdL,
+   0x9823b6e0L, 0x9ce2ab57L, 0x91a18d8eL, 0x95609039L,
+   0x8b27c03cL, 0x8fe6dd8bL, 0x82a5fb52L, 0x8664e6e5L,
+   0xbe2b5b58L, 0xbaea46efL, 0xb7a96036L, 0xb3687d81L,
+   0xad2f2d84L, 0xa9ee3033L, 0xa4ad16eaL, 0xa06c0b5dL,
+   0xd4326d90L, 0xd0f37027L, 0xddb056feL, 0xd9714b49L,
+   0xc7361b4cL, 0xc3f706fbL, 0xceb42022L, 0xca753d95L,
+   0xf23a8028L, 0xf6fb9d9fL, 0xfbb8bb46L, 0xff79a6f1L,
+   0xe13ef6f4L, 0xe5ffeb43L, 0xe8bccd9aL, 0xec7dd02dL,
+   0x34867077L, 0x30476dc0L, 0x3d044b19L, 0x39c556aeL,
+   0x278206abL, 0x23431b1cL, 0x2e003dc5L, 0x2ac12072L,
+   0x128e9dcfL, 0x164f8078L, 0x1b0ca6a1L, 0x1fcdbb16L,
+   0x018aeb13L, 0x054bf6a4L, 0x0808d07dL, 0x0cc9cdcaL,
+   0x7897ab07L, 0x7c56b6b0L, 0x71159069L, 0x75d48ddeL,
+   0x6b93dddbL, 0x6f52c06cL, 0x6211e6b5L, 0x66d0fb02L,
+   0x5e9f46bfL, 0x5a5e5b08L, 0x571d7dd1L, 0x53dc6066L,
+   0x4d9b3063L, 0x495a2dd4L, 0x44190b0dL, 0x40d816baL,
+   0xaca5c697L, 0xa864db20L, 0xa527fdf9L, 0xa1e6e04eL,
+   0xbfa1b04bL, 0xbb60adfcL, 0xb6238b25L, 0xb2e29692L,
+   0x8aad2b2fL, 0x8e6c3698L, 0x832f1041L, 0x87ee0df6L,
+   0x99a95df3L, 0x9d684044L, 0x902b669dL, 0x94ea7b2aL,
+   0xe0b41de7L, 0xe4750050L, 0xe9362689L, 0xedf73b3eL,
+   0xf3b06b3bL, 0xf771768cL, 0xfa325055L, 0xfef34de2L,
+   0xc6bcf05fL, 0xc27dede8L, 0xcf3ecb31L, 0xcbffd686L,
+   0xd5b88683L, 0xd1799b34L, 0xdc3abdedL, 0xd8fba05aL,
+   0x690ce0eeL, 0x6dcdfd59L, 0x608edb80L, 0x644fc637L,
+   0x7a089632L, 0x7ec98b85L, 0x738aad5cL, 0x774bb0ebL,
+   0x4f040d56L, 0x4bc510e1L, 0x46863638L, 0x42472b8fL,
+   0x5c007b8aL, 0x58c1663dL, 0x558240e4L, 0x51435d53L,
+   0x251d3b9eL, 0x21dc2629L, 0x2c9f00f0L, 0x285e1d47L,
+   0x36194d42L, 0x32d850f5L, 0x3f9b762cL, 0x3b5a6b9bL,
+   0x0315d626L, 0x07d4cb91L, 0x0a97ed48L, 0x0e56f0ffL,
+   0x1011a0faL, 0x14d0bd4dL, 0x19939b94L, 0x1d528623L,
+   0xf12f560eL, 0xf5ee4bb9L, 0xf8ad6d60L, 0xfc6c70d7L,
+   0xe22b20d2L, 0xe6ea3d65L, 0xeba91bbcL, 0xef68060bL,
+   0xd727bbb6L, 0xd3e6a601L, 0xdea580d8L, 0xda649d6fL,
+   0xc423cd6aL, 0xc0e2d0ddL, 0xcda1f604L, 0xc960ebb3L,
+   0xbd3e8d7eL, 0xb9ff90c9L, 0xb4bcb610L, 0xb07daba7L,
+   0xae3afba2L, 0xaafbe615L, 0xa7b8c0ccL, 0xa379dd7bL,
+   0x9b3660c6L, 0x9ff77d71L, 0x92b45ba8L, 0x9675461fL,
+   0x8832161aL, 0x8cf30badL, 0x81b02d74L, 0x857130c3L,
+   0x5d8a9099L, 0x594b8d2eL, 0x5408abf7L, 0x50c9b640L,
+   0x4e8ee645L, 0x4a4ffbf2L, 0x470cdd2bL, 0x43cdc09cL,
+   0x7b827d21L, 0x7f436096L, 0x7200464fL, 0x76c15bf8L,
+   0x68860bfdL, 0x6c47164aL, 0x61043093L, 0x65c52d24L,
+   0x119b4be9L, 0x155a565eL, 0x18197087L, 0x1cd86d30L,
+   0x029f3d35L, 0x065e2082L, 0x0b1d065bL, 0x0fdc1becL,
+   0x3793a651L, 0x3352bbe6L, 0x3e119d3fL, 0x3ad08088L,
+   0x2497d08dL, 0x2056cd3aL, 0x2d15ebe3L, 0x29d4f654L,
+   0xc5a92679L, 0xc1683bceL, 0xcc2b1d17L, 0xc8ea00a0L,
+   0xd6ad50a5L, 0xd26c4d12L, 0xdf2f6bcbL, 0xdbee767cL,
+   0xe3a1cbc1L, 0xe760d676L, 0xea23f0afL, 0xeee2ed18L,
+   0xf0a5bd1dL, 0xf464a0aaL, 0xf9278673L, 0xfde69bc4L,
+   0x89b8fd09L, 0x8d79e0beL, 0x803ac667L, 0x84fbdbd0L,
+   0x9abc8bd5L, 0x9e7d9662L, 0x933eb0bbL, 0x97ffad0cL,
+   0xafb010b1L, 0xab710d06L, 0xa6322bdfL, 0xa2f33668L,
+   0xbcb4666dL, 0xb8757bdaL, 0xb5365d03L, 0xb1f740b4L
+};
+
+
+/*-------------------------------------------------------------*/
+/*--- end                                        crctable.c ---*/
+/*-------------------------------------------------------------*/
diff --git a/Utilities/cmbzip2/decompress.c b/Utilities/cmbzip2/decompress.c
new file mode 100644
index 0000000000..bba5e0fa36
--- /dev/null
+++ b/Utilities/cmbzip2/decompress.c
@@ -0,0 +1,626 @@
+
+/*-------------------------------------------------------------*/
+/*--- Decompression machinery                               ---*/
+/*---                                          decompress.c ---*/
+/*-------------------------------------------------------------*/
+
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
+
+   bzip2/libbzip2 version 1.0.5 of 10 December 2007
+   Copyright (C) 1996-2007 Julian Seward <jseward@bzip.org>
+
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
+
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
+
+
+#include "bzlib_private.h"
+
+
+/*---------------------------------------------------*/
+static
+void makeMaps_d ( DState* s )
+{
+   Int32 i;
+   s->nInUse = 0;
+   for (i = 0; i < 256; i++)
+      if (s->inUse[i]) {
+         s->seqToUnseq[s->nInUse] = i;
+         s->nInUse++;
+      }
+}
+
+
+/*---------------------------------------------------*/
+#define RETURN(rrr)                               \
+   { retVal = rrr; goto save_state_and_return; };
+
+#define GET_BITS(lll,vvv,nnn)                     \
+   case lll: s->state = lll;                      \
+   while (True) {                                 \
+      if (s->bsLive >= nnn) {                     \
+         UInt32 v;                                \
+         v = (s->bsBuff >>                        \
+             (s->bsLive-nnn)) & ((1 << nnn)-1);   \
+         s->bsLive -= nnn;                        \
+         vvv = v;                                 \
+         break;                                   \
+      }                                           \
+      if (s->strm->avail_in == 0) RETURN(BZ_OK);  \
+      s->bsBuff                                   \
+         = (s->bsBuff << 8) |                     \
+           ((UInt32)                              \
+              (*((UChar*)(s->strm->next_in))));   \
+      s->bsLive += 8;                             \
+      s->strm->next_in++;                         \
+      s->strm->avail_in--;                        \
+      s->strm->total_in_lo32++;                   \
+      if (s->strm->total_in_lo32 == 0)            \
+         s->strm->total_in_hi32++;                \
+   }
+
+#define GET_UCHAR(lll,uuu)                        \
+   GET_BITS(lll,uuu,8)
+
+#define GET_BIT(lll,uuu)                          \
+   GET_BITS(lll,uuu,1)
+
+/*---------------------------------------------------*/
+#define GET_MTF_VAL(label1,label2,lval)           \
+{                                                 \
+   if (groupPos == 0) {                           \
+      groupNo++;                                  \
+      if (groupNo >= nSelectors)                  \
+         RETURN(BZ_DATA_ERROR);                   \
+      groupPos = BZ_G_SIZE;                       \
+      gSel = s->selector[groupNo];                \
+      gMinlen = s->minLens[gSel];                 \
+      gLimit = &(s->limit[gSel][0]);              \
+      gPerm = &(s->perm[gSel][0]);                \
+      gBase = &(s->base[gSel][0]);                \
+   }                                              \
+   groupPos--;                                    \
+   zn = gMinlen;                                  \
+   GET_BITS(label1, zvec, zn);                    \
+   while (1) {                                    \
+      if (zn > 20 /* the longest code */)         \
+         RETURN(BZ_DATA_ERROR);                   \
+      if (zvec <= gLimit[zn]) break;              \
+      zn++;                                       \
+      GET_BIT(label2, zj);                        \
+      zvec = (zvec << 1) | zj;                    \
+   };                                             \
+   if (zvec - gBase[zn] < 0                       \
+       || zvec - gBase[zn] >= BZ_MAX_ALPHA_SIZE)  \
+      RETURN(BZ_DATA_ERROR);                      \
+   lval = gPerm[zvec - gBase[zn]];                \
+}
+
+
+/*---------------------------------------------------*/
+Int32 BZ2_decompress ( DState* s )
+{
+   UChar      uc;
+   Int32      retVal;
+   Int32      minLen, maxLen;
+   bz_stream* strm = s->strm;
+
+   /* stuff that needs to be saved/restored */
+   Int32  i;
+   Int32  j;
+   Int32  t;
+   Int32  alphaSize;
+   Int32  nGroups;
+   Int32  nSelectors;
+   Int32  EOB;
+   Int32  groupNo;
+   Int32  groupPos;
+   Int32  nextSym;
+   Int32  nblockMAX;
+   Int32  nblock;
+   Int32  es;
+   Int32  N;
+   Int32  curr;
+   Int32  zt;
+   Int32  zn; 
+   Int32  zvec;
+   Int32  zj;
+   Int32  gSel;
+   Int32  gMinlen;
+   Int32* gLimit;
+   Int32* gBase;
+   Int32* gPerm;
+
+   if (s->state == BZ_X_MAGIC_1) {
+      /*initialise the save area*/
+      s->save_i           = 0;
+      s->save_j           = 0;
+      s->save_t           = 0;
+      s->save_alphaSize   = 0;
+      s->save_nGroups     = 0;
+      s->save_nSelectors  = 0;
+      s->save_EOB         = 0;
+      s->save_groupNo     = 0;
+      s->save_groupPos    = 0;
+      s->save_nextSym     = 0;
+      s->save_nblockMAX   = 0;
+      s->save_nblock      = 0;
+      s->save_es          = 0;
+      s->save_N           = 0;
+      s->save_curr        = 0;
+      s->save_zt          = 0;
+      s->save_zn          = 0;
+      s->save_zvec        = 0;
+      s->save_zj          = 0;
+      s->save_gSel        = 0;
+      s->save_gMinlen     = 0;
+      s->save_gLimit      = NULL;
+      s->save_gBase       = NULL;
+      s->save_gPerm       = NULL;
+   }
+
+   /*restore from the save area*/
+   i           = s->save_i;
+   j           = s->save_j;
+   t           = s->save_t;
+   alphaSize   = s->save_alphaSize;
+   nGroups     = s->save_nGroups;
+   nSelectors  = s->save_nSelectors;
+   EOB         = s->save_EOB;
+   groupNo     = s->save_groupNo;
+   groupPos    = s->save_groupPos;
+   nextSym     = s->save_nextSym;
+   nblockMAX   = s->save_nblockMAX;
+   nblock      = s->save_nblock;
+   es          = s->save_es;
+   N           = s->save_N;
+   curr        = s->save_curr;
+   zt          = s->save_zt;
+   zn          = s->save_zn; 
+   zvec        = s->save_zvec;
+   zj          = s->save_zj;
+   gSel        = s->save_gSel;
+   gMinlen     = s->save_gMinlen;
+   gLimit      = s->save_gLimit;
+   gBase       = s->save_gBase;
+   gPerm       = s->save_gPerm;
+
+   retVal = BZ_OK;
+
+   switch (s->state) {
+
+      GET_UCHAR(BZ_X_MAGIC_1, uc);
+      if (uc != BZ_HDR_B) RETURN(BZ_DATA_ERROR_MAGIC);
+
+      GET_UCHAR(BZ_X_MAGIC_2, uc);
+      if (uc != BZ_HDR_Z) RETURN(BZ_DATA_ERROR_MAGIC);
+
+      GET_UCHAR(BZ_X_MAGIC_3, uc)
+      if (uc != BZ_HDR_h) RETURN(BZ_DATA_ERROR_MAGIC);
+
+      GET_BITS(BZ_X_MAGIC_4, s->blockSize100k, 8)
+      if (s->blockSize100k < (BZ_HDR_0 + 1) || 
+          s->blockSize100k > (BZ_HDR_0 + 9)) RETURN(BZ_DATA_ERROR_MAGIC);
+      s->blockSize100k -= BZ_HDR_0;
+
+      if (s->smallDecompress) {
+         s->ll16 = BZALLOC( s->blockSize100k * 100000 * sizeof(UInt16) );
+         s->ll4  = BZALLOC( 
+                      ((1 + s->blockSize100k * 100000) >> 1) * sizeof(UChar) 
+                   );
+         if (s->ll16 == NULL || s->ll4 == NULL) RETURN(BZ_MEM_ERROR);
+      } else {
+         s->tt  = BZALLOC( s->blockSize100k * 100000 * sizeof(Int32) );
+         if (s->tt == NULL) RETURN(BZ_MEM_ERROR);
+      }
+
+      GET_UCHAR(BZ_X_BLKHDR_1, uc);
+
+      if (uc == 0x17) goto endhdr_2;
+      if (uc != 0x31) RETURN(BZ_DATA_ERROR);
+      GET_UCHAR(BZ_X_BLKHDR_2, uc);
+      if (uc != 0x41) RETURN(BZ_DATA_ERROR);
+      GET_UCHAR(BZ_X_BLKHDR_3, uc);
+      if (uc != 0x59) RETURN(BZ_DATA_ERROR);
+      GET_UCHAR(BZ_X_BLKHDR_4, uc);
+      if (uc != 0x26) RETURN(BZ_DATA_ERROR);
+      GET_UCHAR(BZ_X_BLKHDR_5, uc);
+      if (uc != 0x53) RETURN(BZ_DATA_ERROR);
+      GET_UCHAR(BZ_X_BLKHDR_6, uc);
+      if (uc != 0x59) RETURN(BZ_DATA_ERROR);
+
+      s->currBlockNo++;
+      if (s->verbosity >= 2)
+         VPrintf1 ( "\n    [%d: huff+mtf ", s->currBlockNo );
+ 
+      s->storedBlockCRC = 0;
+      GET_UCHAR(BZ_X_BCRC_1, uc);
+      s->storedBlockCRC = (s->storedBlockCRC << 8) | ((UInt32)uc);
+      GET_UCHAR(BZ_X_BCRC_2, uc);
+      s->storedBlockCRC = (s->storedBlockCRC << 8) | ((UInt32)uc);
+      GET_UCHAR(BZ_X_BCRC_3, uc);
+      s->storedBlockCRC = (s->storedBlockCRC << 8) | ((UInt32)uc);
+      GET_UCHAR(BZ_X_BCRC_4, uc);
+      s->storedBlockCRC = (s->storedBlockCRC << 8) | ((UInt32)uc);
+
+      GET_BITS(BZ_X_RANDBIT, s->blockRandomised, 1);
+
+      s->origPtr = 0;
+      GET_UCHAR(BZ_X_ORIGPTR_1, uc);
+      s->origPtr = (s->origPtr << 8) | ((Int32)uc);
+      GET_UCHAR(BZ_X_ORIGPTR_2, uc);
+      s->origPtr = (s->origPtr << 8) | ((Int32)uc);
+      GET_UCHAR(BZ_X_ORIGPTR_3, uc);
+      s->origPtr = (s->origPtr << 8) | ((Int32)uc);
+
+      if (s->origPtr < 0)
+         RETURN(BZ_DATA_ERROR);
+      if (s->origPtr > 10 + 100000*s->blockSize100k) 
+         RETURN(BZ_DATA_ERROR);
+
+      /*--- Receive the mapping table ---*/
+      for (i = 0; i < 16; i++) {
+         GET_BIT(BZ_X_MAPPING_1, uc);
+         if (uc == 1) 
+            s->inUse16[i] = True; else 
+            s->inUse16[i] = False;
+      }
+
+      for (i = 0; i < 256; i++) s->inUse[i] = False;
+
+      for (i = 0; i < 16; i++)
+         if (s->inUse16[i])
+            for (j = 0; j < 16; j++) {
+               GET_BIT(BZ_X_MAPPING_2, uc);
+               if (uc == 1) s->inUse[i * 16 + j] = True;
+            }
+      makeMaps_d ( s );
+      if (s->nInUse == 0) RETURN(BZ_DATA_ERROR);
+      alphaSize = s->nInUse+2;
+
+      /*--- Now the selectors ---*/
+      GET_BITS(BZ_X_SELECTOR_1, nGroups, 3);
+      if (nGroups < 2 || nGroups > 6) RETURN(BZ_DATA_ERROR);
+      GET_BITS(BZ_X_SELECTOR_2, nSelectors, 15);
+      if (nSelectors < 1) RETURN(BZ_DATA_ERROR);
+      for (i = 0; i < nSelectors; i++) {
+         j = 0;
+         while (True) {
+            GET_BIT(BZ_X_SELECTOR_3, uc);
+            if (uc == 0) break;
+            j++;
+            if (j >= nGroups) RETURN(BZ_DATA_ERROR);
+         }
+         s->selectorMtf[i] = j;
+      }
+
+      /*--- Undo the MTF values for the selectors. ---*/
+      {
+         UChar pos[BZ_N_GROUPS], tmp, v;
+         for (v = 0; v < nGroups; v++) pos[v] = v;
+   
+         for (i = 0; i < nSelectors; i++) {
+            v = s->selectorMtf[i];
+            tmp = pos[v];
+            while (v > 0) { pos[v] = pos[v-1]; v--; }
+            pos[0] = tmp;
+            s->selector[i] = tmp;
+         }
+      }
+
+      /*--- Now the coding tables ---*/
+      for (t = 0; t < nGroups; t++) {
+         GET_BITS(BZ_X_CODING_1, curr, 5);
+         for (i = 0; i < alphaSize; i++) {
+            while (True) {
+               if (curr < 1 || curr > 20) RETURN(BZ_DATA_ERROR);
+               GET_BIT(BZ_X_CODING_2, uc);
+               if (uc == 0) break;
+               GET_BIT(BZ_X_CODING_3, uc);
+               if (uc == 0) curr++; else curr--;
+            }
+            s->len[t][i] = curr;
+         }
+      }
+
+      /*--- Create the Huffman decoding tables ---*/
+      for (t = 0; t < nGroups; t++) {
+         minLen = 32;
+         maxLen = 0;
+         for (i = 0; i < alphaSize; i++) {
+            if (s->len[t][i] > maxLen) maxLen = s->len[t][i];
+            if (s->len[t][i] < minLen) minLen = s->len[t][i];
+         }
+         BZ2_hbCreateDecodeTables ( 
+            &(s->limit[t][0]), 
+            &(s->base[t][0]), 
+            &(s->perm[t][0]), 
+            &(s->len[t][0]),
+            minLen, maxLen, alphaSize
+         );
+         s->minLens[t] = minLen;
+      }
+
+      /*--- Now the MTF values ---*/
+
+      EOB      = s->nInUse+1;
+      nblockMAX = 100000 * s->blockSize100k;
+      groupNo  = -1;
+      groupPos = 0;
+
+      for (i = 0; i <= 255; i++) s->unzftab[i] = 0;
+
+      /*-- MTF init --*/
+      {
+         Int32 ii, jj, kk;
+         kk = MTFA_SIZE-1;
+         for (ii = 256 / MTFL_SIZE - 1; ii >= 0; ii--) {
+            for (jj = MTFL_SIZE-1; jj >= 0; jj--) {
+               s->mtfa[kk] = (UChar)(ii * MTFL_SIZE + jj);
+               kk--;
+            }
+            s->mtfbase[ii] = kk + 1;
+         }
+      }
+      /*-- end MTF init --*/
+
+      nblock = 0;
+      GET_MTF_VAL(BZ_X_MTF_1, BZ_X_MTF_2, nextSym);
+
+      while (True) {
+
+         if (nextSym == EOB) break;
+
+         if (nextSym == BZ_RUNA || nextSym == BZ_RUNB) {
+
+            es = -1;
+            N = 1;
+            do {
+               if (nextSym == BZ_RUNA) es = es + (0+1) * N; else
+               if (nextSym == BZ_RUNB) es = es + (1+1) * N;
+               N = N * 2;
+               GET_MTF_VAL(BZ_X_MTF_3, BZ_X_MTF_4, nextSym);
+            }
+               while (nextSym == BZ_RUNA || nextSym == BZ_RUNB);
+
+            es++;
+            uc = s->seqToUnseq[ s->mtfa[s->mtfbase[0]] ];
+            s->unzftab[uc] += es;
+
+            if (s->smallDecompress)
+               while (es > 0) {
+                  if (nblock >= nblockMAX) RETURN(BZ_DATA_ERROR);
+                  s->ll16[nblock] = (UInt16)uc;
+                  nblock++;
+                  es--;
+               }
+            else
+               while (es > 0) {
+                  if (nblock >= nblockMAX) RETURN(BZ_DATA_ERROR);
+                  s->tt[nblock] = (UInt32)uc;
+                  nblock++;
+                  es--;
+               };
+
+            continue;
+
+         } else {
+
+            if (nblock >= nblockMAX) RETURN(BZ_DATA_ERROR);
+
+            /*-- uc = MTF ( nextSym-1 ) --*/
+            {
+               Int32 ii, jj, kk, pp, lno, off;
+               UInt32 nn;
+               nn = (UInt32)(nextSym - 1);
+
+               if (nn < MTFL_SIZE) {
+                  /* avoid general-case expense */
+                  pp = s->mtfbase[0];
+                  uc = s->mtfa[pp+nn];
+                  while (nn > 3) {
+                     Int32 z = pp+nn;
+                     s->mtfa[(z)  ] = s->mtfa[(z)-1];
+                     s->mtfa[(z)-1] = s->mtfa[(z)-2];
+                     s->mtfa[(z)-2] = s->mtfa[(z)-3];
+                     s->mtfa[(z)-3] = s->mtfa[(z)-4];
+                     nn -= 4;
+                  }
+                  while (nn > 0) { 
+                     s->mtfa[(pp+nn)] = s->mtfa[(pp+nn)-1]; nn--; 
+                  };
+                  s->mtfa[pp] = uc;
+               } else { 
+                  /* general case */
+                  lno = nn / MTFL_SIZE;
+                  off = nn % MTFL_SIZE;
+                  pp = s->mtfbase[lno] + off;
+                  uc = s->mtfa[pp];
+                  while (pp > s->mtfbase[lno]) { 
+                     s->mtfa[pp] = s->mtfa[pp-1]; pp--; 
+                  };
+                  s->mtfbase[lno]++;
+                  while (lno > 0) {
+                     s->mtfbase[lno]--;
+                     s->mtfa[s->mtfbase[lno]] 
+                        = s->mtfa[s->mtfbase[lno-1] + MTFL_SIZE - 1];
+                     lno--;
+                  }
+                  s->mtfbase[0]--;
+                  s->mtfa[s->mtfbase[0]] = uc;
+                  if (s->mtfbase[0] == 0) {
+                     kk = MTFA_SIZE-1;
+                     for (ii = 256 / MTFL_SIZE-1; ii >= 0; ii--) {
+                        for (jj = MTFL_SIZE-1; jj >= 0; jj--) {
+                           s->mtfa[kk] = s->mtfa[s->mtfbase[ii] + jj];
+                           kk--;
+                        }
+                        s->mtfbase[ii] = kk + 1;
+                     }
+                  }
+               }
+            }
+            /*-- end uc = MTF ( nextSym-1 ) --*/
+
+            s->unzftab[s->seqToUnseq[uc]]++;
+            if (s->smallDecompress)
+               s->ll16[nblock] = (UInt16)(s->seqToUnseq[uc]); else
+               s->tt[nblock]   = (UInt32)(s->seqToUnseq[uc]);
+            nblock++;
+
+            GET_MTF_VAL(BZ_X_MTF_5, BZ_X_MTF_6, nextSym);
+            continue;
+         }
+      }
+
+      /* Now we know what nblock is, we can do a better sanity
+         check on s->origPtr.
+      */
+      if (s->origPtr < 0 || s->origPtr >= nblock)
+         RETURN(BZ_DATA_ERROR);
+
+      /*-- Set up cftab to facilitate generation of T^(-1) --*/
+      s->cftab[0] = 0;
+      for (i = 1; i <= 256; i++) s->cftab[i] = s->unzftab[i-1];
+      for (i = 1; i <= 256; i++) s->cftab[i] += s->cftab[i-1];
+      for (i = 0; i <= 256; i++) {
+         if (s->cftab[i] < 0 || s->cftab[i] > nblock) {
+            /* s->cftab[i] can legitimately be == nblock */
+            RETURN(BZ_DATA_ERROR);
+         }
+      }
+
+      s->state_out_len = 0;
+      s->state_out_ch  = 0;
+      BZ_INITIALISE_CRC ( s->calculatedBlockCRC );
+      s->state = BZ_X_OUTPUT;
+      if (s->verbosity >= 2) VPrintf0 ( "rt+rld" );
+
+      if (s->smallDecompress) {
+
+         /*-- Make a copy of cftab, used in generation of T --*/
+         for (i = 0; i <= 256; i++) s->cftabCopy[i] = s->cftab[i];
+
+         /*-- compute the T vector --*/
+         for (i = 0; i < nblock; i++) {
+            uc = (UChar)(s->ll16[i]);
+            SET_LL(i, s->cftabCopy[uc]);
+            s->cftabCopy[uc]++;
+         }
+
+         /*-- Compute T^(-1) by pointer reversal on T --*/
+         i = s->origPtr;
+         j = GET_LL(i);
+         do {
+            Int32 tmp = GET_LL(j);
+            SET_LL(j, i);
+            i = j;
+            j = tmp;
+         }
+            while (i != s->origPtr);
+
+         s->tPos = s->origPtr;
+         s->nblock_used = 0;
+         if (s->blockRandomised) {
+            BZ_RAND_INIT_MASK;
+            BZ_GET_SMALL(s->k0); s->nblock_used++;
+            BZ_RAND_UPD_MASK; s->k0 ^= BZ_RAND_MASK; 
+         } else {
+            BZ_GET_SMALL(s->k0); s->nblock_used++;
+         }
+
+      } else {
+
+         /*-- compute the T^(-1) vector --*/
+         for (i = 0; i < nblock; i++) {
+            uc = (UChar)(s->tt[i] & 0xff);
+            s->tt[s->cftab[uc]] |= (i << 8);
+            s->cftab[uc]++;
+         }
+
+         s->tPos = s->tt[s->origPtr] >> 8;
+         s->nblock_used = 0;
+         if (s->blockRandomised) {
+            BZ_RAND_INIT_MASK;
+            BZ_GET_FAST(s->k0); s->nblock_used++;
+            BZ_RAND_UPD_MASK; s->k0 ^= BZ_RAND_MASK; 
+         } else {
+            BZ_GET_FAST(s->k0); s->nblock_used++;
+         }
+
+      }
+
+      RETURN(BZ_OK);
+
+
+
+    endhdr_2:
+
+      GET_UCHAR(BZ_X_ENDHDR_2, uc);
+      if (uc != 0x72) RETURN(BZ_DATA_ERROR);
+      GET_UCHAR(BZ_X_ENDHDR_3, uc);
+      if (uc != 0x45) RETURN(BZ_DATA_ERROR);
+      GET_UCHAR(BZ_X_ENDHDR_4, uc);
+      if (uc != 0x38) RETURN(BZ_DATA_ERROR);
+      GET_UCHAR(BZ_X_ENDHDR_5, uc);
+      if (uc != 0x50) RETURN(BZ_DATA_ERROR);
+      GET_UCHAR(BZ_X_ENDHDR_6, uc);
+      if (uc != 0x90) RETURN(BZ_DATA_ERROR);
+
+      s->storedCombinedCRC = 0;
+      GET_UCHAR(BZ_X_CCRC_1, uc);
+      s->storedCombinedCRC = (s->storedCombinedCRC << 8) | ((UInt32)uc);
+      GET_UCHAR(BZ_X_CCRC_2, uc);
+      s->storedCombinedCRC = (s->storedCombinedCRC << 8) | ((UInt32)uc);
+      GET_UCHAR(BZ_X_CCRC_3, uc);
+      s->storedCombinedCRC = (s->storedCombinedCRC << 8) | ((UInt32)uc);
+      GET_UCHAR(BZ_X_CCRC_4, uc);
+      s->storedCombinedCRC = (s->storedCombinedCRC << 8) | ((UInt32)uc);
+
+      s->state = BZ_X_IDLE;
+      RETURN(BZ_STREAM_END);
+
+      default: AssertH ( False, 4001 );
+   }
+
+   AssertH ( False, 4002 );
+
+   save_state_and_return:
+
+   s->save_i           = i;
+   s->save_j           = j;
+   s->save_t           = t;
+   s->save_alphaSize   = alphaSize;
+   s->save_nGroups     = nGroups;
+   s->save_nSelectors  = nSelectors;
+   s->save_EOB         = EOB;
+   s->save_groupNo     = groupNo;
+   s->save_groupPos    = groupPos;
+   s->save_nextSym     = nextSym;
+   s->save_nblockMAX   = nblockMAX;
+   s->save_nblock      = nblock;
+   s->save_es          = es;
+   s->save_N           = N;
+   s->save_curr        = curr;
+   s->save_zt          = zt;
+   s->save_zn          = zn;
+   s->save_zvec        = zvec;
+   s->save_zj          = zj;
+   s->save_gSel        = gSel;
+   s->save_gMinlen     = gMinlen;
+   s->save_gLimit      = gLimit;
+   s->save_gBase       = gBase;
+   s->save_gPerm       = gPerm;
+
+   return retVal;   
+}
+
+
+/*-------------------------------------------------------------*/
+/*--- end                                      decompress.c ---*/
+/*-------------------------------------------------------------*/
diff --git a/Utilities/cmbzip2/dlltest.c b/Utilities/cmbzip2/dlltest.c
new file mode 100644
index 0000000000..03fa14620e
--- /dev/null
+++ b/Utilities/cmbzip2/dlltest.c
@@ -0,0 +1,175 @@
+/*

+   minibz2

+      libbz2.dll test program.

+      by Yoshioka Tsuneo (tsuneo@rr.iij4u.or.jp)

+      This file is Public Domain.  Welcome any email to me.

+

+   usage: minibz2 [-d] [-{1,2,..9}] [[srcfilename] destfilename]

+*/

+

+#define BZ_IMPORT

+#include <stdio.h>

+#include <stdlib.h>

+#include "bzlib.h"

+#ifdef _WIN32

+#include <io.h>

+#endif

+

+

+#ifdef _WIN32

+

+#define BZ2_LIBNAME "libbz2-1.0.2.DLL" 

+

+#include <windows.h>

+static int BZ2DLLLoaded = 0;

+static HINSTANCE BZ2DLLhLib;

+int BZ2DLLLoadLibrary(void)

+{

+   HINSTANCE hLib;

+

+   if(BZ2DLLLoaded==1){return 0;}

+   hLib=LoadLibrary(BZ2_LIBNAME);

+   if(hLib == NULL){

+      fprintf(stderr,"Can't load %s\n",BZ2_LIBNAME);

+      return -1;

+   }

+   BZ2_bzlibVersion=GetProcAddress(hLib,"BZ2_bzlibVersion");

+   BZ2_bzopen=GetProcAddress(hLib,"BZ2_bzopen");

+   BZ2_bzdopen=GetProcAddress(hLib,"BZ2_bzdopen");

+   BZ2_bzread=GetProcAddress(hLib,"BZ2_bzread");

+   BZ2_bzwrite=GetProcAddress(hLib,"BZ2_bzwrite");

+   BZ2_bzflush=GetProcAddress(hLib,"BZ2_bzflush");

+   BZ2_bzclose=GetProcAddress(hLib,"BZ2_bzclose");

+   BZ2_bzerror=GetProcAddress(hLib,"BZ2_bzerror");

+

+   if (!BZ2_bzlibVersion || !BZ2_bzopen || !BZ2_bzdopen

+       || !BZ2_bzread || !BZ2_bzwrite || !BZ2_bzflush

+       || !BZ2_bzclose || !BZ2_bzerror) {

+      fprintf(stderr,"GetProcAddress failed.\n");

+      return -1;

+   }

+   BZ2DLLLoaded=1;

+   BZ2DLLhLib=hLib;

+   return 0;

+

+}

+int BZ2DLLFreeLibrary(void)

+{

+   if(BZ2DLLLoaded==0){return 0;}

+   FreeLibrary(BZ2DLLhLib);

+   BZ2DLLLoaded=0;

+}

+#endif /* WIN32 */

+

+void usage(void)

+{

+   puts("usage: minibz2 [-d] [-{1,2,..9}] [[srcfilename] destfilename]");

+}

+

+int main(int argc,char *argv[])

+{

+   int decompress = 0;

+   int level = 9;

+   char *fn_r = NULL;

+   char *fn_w = NULL;

+

+#ifdef _WIN32

+   if(BZ2DLLLoadLibrary()<0){

+      fprintf(stderr,"Loading of %s failed.  Giving up.\n", BZ2_LIBNAME);

+      exit(1);

+   }

+   printf("Loading of %s succeeded.  Library version is %s.\n",

+          BZ2_LIBNAME, BZ2_bzlibVersion() );

+#endif

+   while(++argv,--argc){

+      if(**argv =='-' || **argv=='/'){

+         char *p;

+

+         for(p=*argv+1;*p;p++){

+            if(*p=='d'){

+               decompress = 1;

+            }else if('1'<=*p && *p<='9'){

+               level = *p - '0';

+            }else{

+               usage();

+               exit(1);

+            }

+         }

+      }else{

+         break;

+      }

+   }

+   if(argc>=1){

+      fn_r = *argv;

+      argc--;argv++;

+   }else{

+      fn_r = NULL;

+   }

+   if(argc>=1){

+      fn_w = *argv;

+      argc--;argv++;

+   }else{

+      fn_w = NULL;

+   }

+   {

+      int len;

+      char buff[0x1000];

+      char mode[10];

+

+      if(decompress){

+         BZFILE *BZ2fp_r = NULL;

+         FILE *fp_w = NULL;

+

+         if(fn_w){

+            if((fp_w = fopen(fn_w,"wb"))==NULL){

+               printf("can't open [%s]\n",fn_w);

+               perror("reason:");

+               exit(1);

+            }

+         }else{

+            fp_w = stdout;

+         }

+         if((fn_r == NULL && (BZ2fp_r = BZ2_bzdopen(fileno(stdin),"rb"))==NULL)

+            || (fn_r != NULL && (BZ2fp_r = BZ2_bzopen(fn_r,"rb"))==NULL)){

+            printf("can't bz2openstream\n");

+            exit(1);

+         }

+         while((len=BZ2_bzread(BZ2fp_r,buff,0x1000))>0){

+            fwrite(buff,1,len,fp_w);

+         }

+         BZ2_bzclose(BZ2fp_r);

+         if(fp_w != stdout) fclose(fp_w);

+      }else{

+         BZFILE *BZ2fp_w = NULL;

+         FILE *fp_r = NULL;

+

+         if(fn_r){

+            if((fp_r = fopen(fn_r,"rb"))==NULL){

+               printf("can't open [%s]\n",fn_r);

+               perror("reason:");

+               exit(1);

+            }

+         }else{

+            fp_r = stdin;

+         }

+         mode[0]='w';

+         mode[1] = '0' + level;

+         mode[2] = '\0';

+

+         if((fn_w == NULL && (BZ2fp_w = BZ2_bzdopen(fileno(stdout),mode))==NULL)

+            || (fn_w !=NULL && (BZ2fp_w = BZ2_bzopen(fn_w,mode))==NULL)){

+            printf("can't bz2openstream\n");

+            exit(1);

+         }

+         while((len=fread(buff,1,0x1000,fp_r))>0){

+            BZ2_bzwrite(BZ2fp_w,buff,len);

+         }

+         BZ2_bzclose(BZ2fp_w);

+         if(fp_r!=stdin)fclose(fp_r);

+      }

+   }

+#ifdef _WIN32

+   BZ2DLLFreeLibrary();

+#endif

+   return 0;

+}

diff --git a/Utilities/cmbzip2/huffman.c b/Utilities/cmbzip2/huffman.c
new file mode 100644
index 0000000000..87e79e38af
--- /dev/null
+++ b/Utilities/cmbzip2/huffman.c
@@ -0,0 +1,205 @@
+
+/*-------------------------------------------------------------*/
+/*--- Huffman coding low-level stuff                        ---*/
+/*---                                             huffman.c ---*/
+/*-------------------------------------------------------------*/
+
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
+
+   bzip2/libbzip2 version 1.0.5 of 10 December 2007
+   Copyright (C) 1996-2007 Julian Seward <jseward@bzip.org>
+
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
+
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
+
+
+#include "bzlib_private.h"
+
+/*---------------------------------------------------*/
+#define WEIGHTOF(zz0)  ((zz0) & 0xffffff00)
+#define DEPTHOF(zz1)   ((zz1) & 0x000000ff)
+#define MYMAX(zz2,zz3) ((zz2) > (zz3) ? (zz2) : (zz3))
+
+#define ADDWEIGHTS(zw1,zw2)                           \
+   (WEIGHTOF(zw1)+WEIGHTOF(zw2)) |                    \
+   (1 + MYMAX(DEPTHOF(zw1),DEPTHOF(zw2)))
+
+#define UPHEAP(z)                                     \
+{                                                     \
+   Int32 zz, tmp;                                     \
+   zz = z; tmp = heap[zz];                            \
+   while (weight[tmp] < weight[heap[zz >> 1]]) {      \
+      heap[zz] = heap[zz >> 1];                       \
+      zz >>= 1;                                       \
+   }                                                  \
+   heap[zz] = tmp;                                    \
+}
+
+#define DOWNHEAP(z)                                   \
+{                                                     \
+   Int32 zz, yy, tmp;                                 \
+   zz = z; tmp = heap[zz];                            \
+   while (True) {                                     \
+      yy = zz << 1;                                   \
+      if (yy > nHeap) break;                          \
+      if (yy < nHeap &&                               \
+          weight[heap[yy+1]] < weight[heap[yy]])      \
+         yy++;                                        \
+      if (weight[tmp] < weight[heap[yy]]) break;      \
+      heap[zz] = heap[yy];                            \
+      zz = yy;                                        \
+   }                                                  \
+   heap[zz] = tmp;                                    \
+}
+
+
+/*---------------------------------------------------*/
+void BZ2_hbMakeCodeLengths ( UChar *len, 
+                             Int32 *freq,
+                             Int32 alphaSize,
+                             Int32 maxLen )
+{
+   /*--
+      Nodes and heap entries run from 1.  Entry 0
+      for both the heap and nodes is a sentinel.
+   --*/
+   Int32 nNodes, nHeap, n1, n2, i, j, k;
+   Bool  tooLong;
+
+   Int32 heap   [ BZ_MAX_ALPHA_SIZE + 2 ];
+   Int32 weight [ BZ_MAX_ALPHA_SIZE * 2 ];
+   Int32 parent [ BZ_MAX_ALPHA_SIZE * 2 ]; 
+
+   for (i = 0; i < alphaSize; i++)
+      weight[i+1] = (freq[i] == 0 ? 1 : freq[i]) << 8;
+
+   while (True) {
+
+      nNodes = alphaSize;
+      nHeap = 0;
+
+      heap[0] = 0;
+      weight[0] = 0;
+      parent[0] = -2;
+
+      for (i = 1; i <= alphaSize; i++) {
+         parent[i] = -1;
+         nHeap++;
+         heap[nHeap] = i;
+         UPHEAP(nHeap);
+      }
+
+      AssertH( nHeap < (BZ_MAX_ALPHA_SIZE+2), 2001 );
+   
+      while (nHeap > 1) {
+         n1 = heap[1]; heap[1] = heap[nHeap]; nHeap--; DOWNHEAP(1);
+         n2 = heap[1]; heap[1] = heap[nHeap]; nHeap--; DOWNHEAP(1);
+         nNodes++;
+         parent[n1] = parent[n2] = nNodes;
+         weight[nNodes] = ADDWEIGHTS(weight[n1], weight[n2]);
+         parent[nNodes] = -1;
+         nHeap++;
+         heap[nHeap] = nNodes;
+         UPHEAP(nHeap);
+      }
+
+      AssertH( nNodes < (BZ_MAX_ALPHA_SIZE * 2), 2002 );
+
+      tooLong = False;
+      for (i = 1; i <= alphaSize; i++) {
+         j = 0;
+         k = i;
+         while (parent[k] >= 0) { k = parent[k]; j++; }
+         len[i-1] = j;
+         if (j > maxLen) tooLong = True;
+      }
+      
+      if (! tooLong) break;
+
+      /* 17 Oct 04: keep-going condition for the following loop used
+         to be 'i < alphaSize', which missed the last element,
+         theoretically leading to the possibility of the compressor
+         looping.  However, this count-scaling step is only needed if
+         one of the generated Huffman code words is longer than
+         maxLen, which up to and including version 1.0.2 was 20 bits,
+         which is extremely unlikely.  In version 1.0.3 maxLen was
+         changed to 17 bits, which has minimal effect on compression
+         ratio, but does mean this scaling step is used from time to
+         time, enough to verify that it works.
+
+         This means that bzip2-1.0.3 and later will only produce
+         Huffman codes with a maximum length of 17 bits.  However, in
+         order to preserve backwards compatibility with bitstreams
+         produced by versions pre-1.0.3, the decompressor must still
+         handle lengths of up to 20. */
+
+      for (i = 1; i <= alphaSize; i++) {
+         j = weight[i] >> 8;
+         j = 1 + (j / 2);
+         weight[i] = j << 8;
+      }
+   }
+}
+
+
+/*---------------------------------------------------*/
+void BZ2_hbAssignCodes ( Int32 *code,
+                         UChar *length,
+                         Int32 minLen,
+                         Int32 maxLen,
+                         Int32 alphaSize )
+{
+   Int32 n, vec, i;
+
+   vec = 0;
+   for (n = minLen; n <= maxLen; n++) {
+      for (i = 0; i < alphaSize; i++)
+         if (length[i] == n) { code[i] = vec; vec++; };
+      vec <<= 1;
+   }
+}
+
+
+/*---------------------------------------------------*/
+void BZ2_hbCreateDecodeTables ( Int32 *limit,
+                                Int32 *base,
+                                Int32 *perm,
+                                UChar *length,
+                                Int32 minLen,
+                                Int32 maxLen,
+                                Int32 alphaSize )
+{
+   Int32 pp, i, j, vec;
+
+   pp = 0;
+   for (i = minLen; i <= maxLen; i++)
+      for (j = 0; j < alphaSize; j++)
+         if (length[j] == i) { perm[pp] = j; pp++; };
+
+   for (i = 0; i < BZ_MAX_CODE_LEN; i++) base[i] = 0;
+   for (i = 0; i < alphaSize; i++) base[length[i]+1]++;
+
+   for (i = 1; i < BZ_MAX_CODE_LEN; i++) base[i] += base[i-1];
+
+   for (i = 0; i < BZ_MAX_CODE_LEN; i++) limit[i] = 0;
+   vec = 0;
+
+   for (i = minLen; i <= maxLen; i++) {
+      vec += (base[i+1] - base[i]);
+      limit[i] = vec-1;
+      vec <<= 1;
+   }
+   for (i = minLen + 1; i <= maxLen; i++)
+      base[i] = ((limit[i-1] + 1) << 1) - base[i];
+}
+
+
+/*-------------------------------------------------------------*/
+/*--- end                                         huffman.c ---*/
+/*-------------------------------------------------------------*/
diff --git a/Utilities/cmbzip2/mk251.c b/Utilities/cmbzip2/mk251.c
new file mode 100644
index 0000000000..39e94c0573
--- /dev/null
+++ b/Utilities/cmbzip2/mk251.c
@@ -0,0 +1,31 @@
+
+/* Spew out a long sequence of the byte 251.  When fed to bzip2
+   versions 1.0.0 or 1.0.1, causes it to die with internal error
+   1007 in blocksort.c.  This assertion misses an extremely rare
+   case, which is fixed in this version (1.0.2) and above.
+*/
+
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
+
+   bzip2/libbzip2 version 1.0.5 of 10 December 2007
+   Copyright (C) 1996-2007 Julian Seward <jseward@bzip.org>
+
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
+
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
+
+
+#include <stdio.h>
+
+int main ()
+{
+   int i;
+   for (i = 0; i < 48500000 ; i++)
+     putchar(251);
+   return 0;
+}
diff --git a/Utilities/cmbzip2/randtable.c b/Utilities/cmbzip2/randtable.c
new file mode 100644
index 0000000000..068b76367b
--- /dev/null
+++ b/Utilities/cmbzip2/randtable.c
@@ -0,0 +1,84 @@
+
+/*-------------------------------------------------------------*/
+/*--- Table for randomising repetitive blocks               ---*/
+/*---                                           randtable.c ---*/
+/*-------------------------------------------------------------*/
+
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
+
+   bzip2/libbzip2 version 1.0.5 of 10 December 2007
+   Copyright (C) 1996-2007 Julian Seward <jseward@bzip.org>
+
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
+
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
+
+
+#include "bzlib_private.h"
+
+
+/*---------------------------------------------*/
+Int32 BZ2_rNums[512] = { 
+   619, 720, 127, 481, 931, 816, 813, 233, 566, 247, 
+   985, 724, 205, 454, 863, 491, 741, 242, 949, 214, 
+   733, 859, 335, 708, 621, 574, 73, 654, 730, 472, 
+   419, 436, 278, 496, 867, 210, 399, 680, 480, 51, 
+   878, 465, 811, 169, 869, 675, 611, 697, 867, 561, 
+   862, 687, 507, 283, 482, 129, 807, 591, 733, 623, 
+   150, 238, 59, 379, 684, 877, 625, 169, 643, 105, 
+   170, 607, 520, 932, 727, 476, 693, 425, 174, 647, 
+   73, 122, 335, 530, 442, 853, 695, 249, 445, 515, 
+   909, 545, 703, 919, 874, 474, 882, 500, 594, 612, 
+   641, 801, 220, 162, 819, 984, 589, 513, 495, 799, 
+   161, 604, 958, 533, 221, 400, 386, 867, 600, 782, 
+   382, 596, 414, 171, 516, 375, 682, 485, 911, 276, 
+   98, 553, 163, 354, 666, 933, 424, 341, 533, 870, 
+   227, 730, 475, 186, 263, 647, 537, 686, 600, 224, 
+   469, 68, 770, 919, 190, 373, 294, 822, 808, 206, 
+   184, 943, 795, 384, 383, 461, 404, 758, 839, 887, 
+   715, 67, 618, 276, 204, 918, 873, 777, 604, 560, 
+   951, 160, 578, 722, 79, 804, 96, 409, 713, 940, 
+   652, 934, 970, 447, 318, 353, 859, 672, 112, 785, 
+   645, 863, 803, 350, 139, 93, 354, 99, 820, 908, 
+   609, 772, 154, 274, 580, 184, 79, 626, 630, 742, 
+   653, 282, 762, 623, 680, 81, 927, 626, 789, 125, 
+   411, 521, 938, 300, 821, 78, 343, 175, 128, 250, 
+   170, 774, 972, 275, 999, 639, 495, 78, 352, 126, 
+   857, 956, 358, 619, 580, 124, 737, 594, 701, 612, 
+   669, 112, 134, 694, 363, 992, 809, 743, 168, 974, 
+   944, 375, 748, 52, 600, 747, 642, 182, 862, 81, 
+   344, 805, 988, 739, 511, 655, 814, 334, 249, 515, 
+   897, 955, 664, 981, 649, 113, 974, 459, 893, 228, 
+   433, 837, 553, 268, 926, 240, 102, 654, 459, 51, 
+   686, 754, 806, 760, 493, 403, 415, 394, 687, 700, 
+   946, 670, 656, 610, 738, 392, 760, 799, 887, 653, 
+   978, 321, 576, 617, 626, 502, 894, 679, 243, 440, 
+   680, 879, 194, 572, 640, 724, 926, 56, 204, 700, 
+   707, 151, 457, 449, 797, 195, 791, 558, 945, 679, 
+   297, 59, 87, 824, 713, 663, 412, 693, 342, 606, 
+   134, 108, 571, 364, 631, 212, 174, 643, 304, 329, 
+   343, 97, 430, 751, 497, 314, 983, 374, 822, 928, 
+   140, 206, 73, 263, 980, 736, 876, 478, 430, 305, 
+   170, 514, 364, 692, 829, 82, 855, 953, 676, 246, 
+   369, 970, 294, 750, 807, 827, 150, 790, 288, 923, 
+   804, 378, 215, 828, 592, 281, 565, 555, 710, 82, 
+   896, 831, 547, 261, 524, 462, 293, 465, 502, 56, 
+   661, 821, 976, 991, 658, 869, 905, 758, 745, 193, 
+   768, 550, 608, 933, 378, 286, 215, 979, 792, 961, 
+   61, 688, 793, 644, 986, 403, 106, 366, 905, 644, 
+   372, 567, 466, 434, 645, 210, 389, 550, 919, 135, 
+   780, 773, 635, 389, 707, 100, 626, 958, 165, 504, 
+   920, 176, 193, 713, 857, 265, 203, 50, 668, 108, 
+   645, 990, 626, 197, 510, 357, 358, 850, 858, 364, 
+   936, 638
+};
+
+
+/*-------------------------------------------------------------*/
+/*--- end                                       randtable.c ---*/
+/*-------------------------------------------------------------*/
diff --git a/Utilities/cmbzip2/spewG.c b/Utilities/cmbzip2/spewG.c
new file mode 100644
index 0000000000..5892b92c36
--- /dev/null
+++ b/Utilities/cmbzip2/spewG.c
@@ -0,0 +1,54 @@
+
+/* spew out a thoroughly gigantic file designed so that bzip2
+   can compress it reasonably rapidly.  This is to help test
+   support for large files (> 2GB) in a reasonable amount of time.
+   I suggest you use the undocumented --exponential option to
+   bzip2 when compressing the resulting file; this saves a bit of
+   time.  Note: *don't* bother with --exponential when compressing 
+   Real Files; it'll just waste a lot of CPU time :-)
+   (but is otherwise harmless).
+*/
+
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
+
+   bzip2/libbzip2 version 1.0.5 of 10 December 2007
+   Copyright (C) 1996-2007 Julian Seward <jseward@bzip.org>
+
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
+
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+	 ------------------------------------------------------------------ */
+
+
+#define _FILE_OFFSET_BITS 64
+
+#include <stdio.h>
+#include <stdlib.h>
+
+/* The number of megabytes of junk to spew out (roughly) */
+#define MEGABYTES 5000
+
+#define N_BUF 1000000
+char buf[N_BUF];
+
+int main ( int argc, char** argv )
+{
+   int ii, kk, p;
+   srandom(1);
+   setbuffer ( stdout, buf, N_BUF );
+   for (kk = 0; kk < MEGABYTES * 515; kk+=3) {
+      p = 25+random()%50;
+      for (ii = 0; ii < p; ii++)
+         printf ( "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" );
+      for (ii = 0; ii < p-1; ii++)
+         printf ( "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb" );
+      for (ii = 0; ii < p+1; ii++)
+         printf ( "ccccccccccccccccccccccccccccccccccccc" );
+   }
+   fflush(stdout);
+   return 0;
+}
diff --git a/Utilities/cmbzip2/unzcrash.c b/Utilities/cmbzip2/unzcrash.c
new file mode 100644
index 0000000000..a1b75463ad
--- /dev/null
+++ b/Utilities/cmbzip2/unzcrash.c
@@ -0,0 +1,141 @@
+
+/* A test program written to test robustness to decompression of
+   corrupted data.  Usage is 
+       unzcrash filename
+   and the program will read the specified file, compress it (in memory),
+   and then repeatedly decompress it, each time with a different bit of
+   the compressed data inverted, so as to test all possible one-bit errors.
+   This should not cause any invalid memory accesses.  If it does, 
+   I want to know about it!
+
+   PS.  As you can see from the above description, the process is
+   incredibly slow.  A file of size eg 5KB will cause it to run for
+   many hours.
+*/
+
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
+
+   bzip2/libbzip2 version 1.0.5 of 10 December 2007
+   Copyright (C) 1996-2007 Julian Seward <jseward@bzip.org>
+
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
+
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
+
+
+#include <stdio.h>
+#include <assert.h>
+#include "bzlib.h"
+
+#define M_BLOCK 1000000
+
+typedef unsigned char uchar;
+
+#define M_BLOCK_OUT (M_BLOCK + 1000000)
+uchar inbuf[M_BLOCK];
+uchar outbuf[M_BLOCK_OUT];
+uchar zbuf[M_BLOCK + 600 + (M_BLOCK / 100)];
+
+int nIn, nOut, nZ;
+
+static char *bzerrorstrings[] = {
+       "OK"
+      ,"SEQUENCE_ERROR"
+      ,"PARAM_ERROR"
+      ,"MEM_ERROR"
+      ,"DATA_ERROR"
+      ,"DATA_ERROR_MAGIC"
+      ,"IO_ERROR"
+      ,"UNEXPECTED_EOF"
+      ,"OUTBUFF_FULL"
+      ,"???"   /* for future */
+      ,"???"   /* for future */
+      ,"???"   /* for future */
+      ,"???"   /* for future */
+      ,"???"   /* for future */
+      ,"???"   /* for future */
+};
+
+void flip_bit ( int bit )
+{
+   int byteno = bit / 8;
+   int bitno  = bit % 8;
+   uchar mask = 1 << bitno;
+   //fprintf ( stderr, "(byte %d  bit %d  mask %d)",
+   //          byteno, bitno, (int)mask );
+   zbuf[byteno] ^= mask;
+}
+
+int main ( int argc, char** argv )
+{
+   FILE* f;
+   int   r;
+   int   bit;
+   int   i;
+
+   if (argc != 2) {
+      fprintf ( stderr, "usage: unzcrash filename\n" );
+      return 1;
+   }
+
+   f = fopen ( argv[1], "r" );
+   if (!f) {
+      fprintf ( stderr, "unzcrash: can't open %s\n", argv[1] );
+      return 1;
+   }
+
+   nIn = fread ( inbuf, 1, M_BLOCK, f );
+   fprintf ( stderr, "%d bytes read\n", nIn );
+
+   nZ = M_BLOCK;
+   r = BZ2_bzBuffToBuffCompress (
+         zbuf, &nZ, inbuf, nIn, 9, 0, 30 );
+
+   assert (r == BZ_OK);
+   fprintf ( stderr, "%d after compression\n", nZ );
+
+   for (bit = 0; bit < nZ*8; bit++) {
+      fprintf ( stderr, "bit %d  ", bit );
+      flip_bit ( bit );
+      nOut = M_BLOCK_OUT;
+      r = BZ2_bzBuffToBuffDecompress (
+            outbuf, &nOut, zbuf, nZ, 0, 0 );
+      fprintf ( stderr, " %d  %s ", r, bzerrorstrings[-r] );
+
+      if (r != BZ_OK) {
+         fprintf ( stderr, "\n" );
+      } else {
+         if (nOut != nIn) {
+           fprintf(stderr, "nIn/nOut mismatch %d %d\n", nIn, nOut );
+           return 1;
+         } else {
+           for (i = 0; i < nOut; i++)
+             if (inbuf[i] != outbuf[i]) { 
+                fprintf(stderr, "mismatch at %d\n", i ); 
+                return 1; 
+           }
+           if (i == nOut) fprintf(stderr, "really ok!\n" );
+         }
+      }
+
+      flip_bit ( bit );
+   }
+
+#if 0
+   assert (nOut == nIn);
+   for (i = 0; i < nOut; i++) {
+     if (inbuf[i] != outbuf[i]) {
+        fprintf ( stderr, "difference at %d !\n", i );
+        return 1;
+     }
+   }
+#endif
+
+   fprintf ( stderr, "all ok\n" );
+   return 0;
+}