diff options
Diffstat (limited to 'Utilities/cmlibarchive/libarchive/archive_write_add_filter_zstd.c')
-rw-r--r-- | Utilities/cmlibarchive/libarchive/archive_write_add_filter_zstd.c | 335 |
1 files changed, 335 insertions, 0 deletions
diff --git a/Utilities/cmlibarchive/libarchive/archive_write_add_filter_zstd.c b/Utilities/cmlibarchive/libarchive/archive_write_add_filter_zstd.c new file mode 100644 index 0000000000..671fc6affb --- /dev/null +++ b/Utilities/cmlibarchive/libarchive/archive_write_add_filter_zstd.c @@ -0,0 +1,335 @@ +/*- + * Copyright (c) 2017 Sean Purcell + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "archive_platform.h" + +__FBSDID("$FreeBSD$"); + + +#ifdef HAVE_ERRNO_H +#include <errno.h> +#endif +#ifdef HAVE_STDLIB_H +#include <stdlib.h> +#endif +#ifdef HAVE_STRING_H +#include <string.h> +#endif +#ifdef HAVE_ZSTD_H +#include <zstd.h> +#endif + +#include "archive.h" +#include "archive_private.h" +#include "archive_string.h" +#include "archive_write_private.h" + +/* Don't compile this if we don't have zstd.h */ + +struct private_data { + int compression_level; +#if HAVE_ZSTD_H && HAVE_LIBZSTD + ZSTD_CStream *cstream; + int64_t total_in; + ZSTD_outBuffer out; +#else + struct archive_write_program_data *pdata; +#endif +}; + +static int archive_compressor_zstd_options(struct archive_write_filter *, + const char *, const char *); +static int archive_compressor_zstd_open(struct archive_write_filter *); +static int archive_compressor_zstd_write(struct archive_write_filter *, + const void *, size_t); +static int archive_compressor_zstd_close(struct archive_write_filter *); +static int archive_compressor_zstd_free(struct archive_write_filter *); +#if HAVE_ZSTD_H && HAVE_LIBZSTD +static int drive_compressor(struct archive_write_filter *, + struct private_data *, int, const void *, size_t); +#endif + + +/* + * Add a zstd compression filter to this write handle. + */ +int +archive_write_add_filter_zstd(struct archive *_a) +{ + struct archive_write *a = (struct archive_write *)_a; + struct archive_write_filter *f = __archive_write_allocate_filter(_a); + struct private_data *data; + archive_check_magic(&a->archive, ARCHIVE_WRITE_MAGIC, + ARCHIVE_STATE_NEW, "archive_write_add_filter_zstd"); + + data = calloc(1, sizeof(*data)); + if (data == NULL) { + archive_set_error(&a->archive, ENOMEM, "Out of memory"); + return (ARCHIVE_FATAL); + } + f->data = data; + f->open = &archive_compressor_zstd_open; + f->options = &archive_compressor_zstd_options; + f->close = &archive_compressor_zstd_close; + f->free = &archive_compressor_zstd_free; + f->code = ARCHIVE_FILTER_ZSTD; + f->name = "zstd"; + data->compression_level = 3; /* Default level used by the zstd CLI */ +#if HAVE_ZSTD_H && HAVE_LIBZSTD + data->cstream = ZSTD_createCStream(); + if (data->cstream == NULL) { + free(data); + archive_set_error(&a->archive, ENOMEM, + "Failed to allocate zstd compressor object"); + return (ARCHIVE_FATAL); + } + + return (ARCHIVE_OK); +#else + data->pdata = __archive_write_program_allocate("zstd"); + if (data->pdata == NULL) { + free(data); + archive_set_error(&a->archive, ENOMEM, "Out of memory"); + return (ARCHIVE_FATAL); + } + archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC, + "Using external zstd program"); + return (ARCHIVE_WARN); +#endif +} + +static int +archive_compressor_zstd_free(struct archive_write_filter *f) +{ + struct private_data *data = (struct private_data *)f->data; +#if HAVE_ZSTD_H && HAVE_LIBZSTD + ZSTD_freeCStream(data->cstream); + free(data->out.dst); +#else + __archive_write_program_free(data->pdata); +#endif + free(data); + f->data = NULL; + return (ARCHIVE_OK); +} + +/* + * Set write options. + */ +static int +archive_compressor_zstd_options(struct archive_write_filter *f, const char *key, + const char *value) +{ + struct private_data *data = (struct private_data *)f->data; + + if (strcmp(key, "compression-level") == 0) { + int level = atoi(value); +#if HAVE_ZSTD_H && HAVE_LIBZSTD + if (level < 1 || level > ZSTD_maxCLevel()) { +#else + /* If we don't have the library, hard-code the max level */ + if (level < 1 || level > 22) { +#endif + return (ARCHIVE_WARN); + } + data->compression_level = level; + return (ARCHIVE_OK); + } + + /* Note: The "warn" return is just to inform the options + * supervisor that we didn't handle it. It will generate + * a suitable error if no one used this option. */ + return (ARCHIVE_WARN); +} + +#if HAVE_ZSTD_H && HAVE_LIBZSTD +/* + * Setup callback. + */ +static int +archive_compressor_zstd_open(struct archive_write_filter *f) +{ + struct private_data *data = (struct private_data *)f->data; + int ret; + + ret = __archive_write_open_filter(f->next_filter); + if (ret != ARCHIVE_OK) + return (ret); + + if (data->out.dst == NULL) { + size_t bs = ZSTD_CStreamOutSize(), bpb; + if (f->archive->magic == ARCHIVE_WRITE_MAGIC) { + /* Buffer size should be a multiple number of + * the of bytes per block for performance. */ + bpb = archive_write_get_bytes_per_block(f->archive); + if (bpb > bs) + bs = bpb; + else if (bpb != 0) + bs -= bs % bpb; + } + data->out.size = bs; + data->out.pos = 0; + data->out.dst + = (unsigned char *)malloc(data->out.size); + if (data->out.dst == NULL) { + archive_set_error(f->archive, ENOMEM, + "Can't allocate data for compression buffer"); + return (ARCHIVE_FATAL); + } + } + + f->write = archive_compressor_zstd_write; + + if (ZSTD_isError(ZSTD_initCStream(data->cstream, + data->compression_level))) { + archive_set_error(f->archive, ARCHIVE_ERRNO_MISC, + "Internal error initializing zstd compressor object"); + return (ARCHIVE_FATAL); + } + + return (ARCHIVE_OK); +} + +/* + * Write data to the compressed stream. + */ +static int +archive_compressor_zstd_write(struct archive_write_filter *f, const void *buff, + size_t length) +{ + struct private_data *data = (struct private_data *)f->data; + int ret; + + /* Update statistics */ + data->total_in += length; + + if ((ret = drive_compressor(f, data, 0, buff, length)) != ARCHIVE_OK) + return (ret); + + return (ARCHIVE_OK); +} + +/* + * Finish the compression... + */ +static int +archive_compressor_zstd_close(struct archive_write_filter *f) +{ + struct private_data *data = (struct private_data *)f->data; + int r1, r2; + + /* Finish zstd frame */ + r1 = drive_compressor(f, data, 1, NULL, 0); + + r2 = __archive_write_close_filter(f->next_filter); + + return r1 < r2 ? r1 : r2; +} + +/* + * Utility function to push input data through compressor, + * writing full output blocks as necessary. + * + * Note that this handles both the regular write case (finishing == + * false) and the end-of-archive case (finishing == true). + */ +static int +drive_compressor(struct archive_write_filter *f, + struct private_data *data, int finishing, const void *src, size_t length) +{ + ZSTD_inBuffer in = (ZSTD_inBuffer) { src, length, 0 }; + + for (;;) { + if (data->out.pos == data->out.size) { + const int ret = __archive_write_filter(f->next_filter, + data->out.dst, data->out.size); + if (ret != ARCHIVE_OK) + return (ARCHIVE_FATAL); + data->out.pos = 0; + } + + /* If there's nothing to do, we're done. */ + if (!finishing && in.pos == in.size) + return (ARCHIVE_OK); + + { + const size_t zstdret = !finishing ? + ZSTD_compressStream(data->cstream, &data->out, &in) + : ZSTD_endStream(data->cstream, &data->out); + + if (ZSTD_isError(zstdret)) { + archive_set_error(f->archive, + ARCHIVE_ERRNO_MISC, + "Zstd compression failed: %s", + ZSTD_getErrorName(zstdret)); + return (ARCHIVE_FATAL); + } + + /* If we're finishing, 0 means nothing left to flush */ + if (finishing && zstdret == 0) { + const int ret = __archive_write_filter(f->next_filter, + data->out.dst, data->out.pos); + return (ret); + } + } + } +} + +#else /* HAVE_ZSTD_H && HAVE_LIBZSTD */ + +static int +archive_compressor_zstd_open(struct archive_write_filter *f) +{ + struct private_data *data = (struct private_data *)f->data; + struct archive_string as; + int r; + + archive_string_init(&as); + archive_string_sprintf(&as, "zstd -%d", data->compression_level); + + f->write = archive_compressor_zstd_write; + r = __archive_write_program_open(f, data->pdata, as.s); + archive_string_free(&as); + return (r); +} + +static int +archive_compressor_zstd_write(struct archive_write_filter *f, const void *buff, + size_t length) +{ + struct private_data *data = (struct private_data *)f->data; + + return __archive_write_program_write(f, data->pdata, buff, length); +} + +static int +archive_compressor_zstd_close(struct archive_write_filter *f) +{ + struct private_data *data = (struct private_data *)f->data; + + return __archive_write_program_close(f, data->pdata); +} + +#endif /* HAVE_ZSTD_H && HAVE_LIBZSTD */ |