diff options
Diffstat (limited to 'Utilities/cmlibarchive/libarchive/archive_write_set_compression_bzip2.c')
-rw-r--r-- | Utilities/cmlibarchive/libarchive/archive_write_set_compression_bzip2.c | 409 |
1 files changed, 409 insertions, 0 deletions
diff --git a/Utilities/cmlibarchive/libarchive/archive_write_set_compression_bzip2.c b/Utilities/cmlibarchive/libarchive/archive_write_set_compression_bzip2.c new file mode 100644 index 0000000000..a617dafb7a --- /dev/null +++ b/Utilities/cmlibarchive/libarchive/archive_write_set_compression_bzip2.c @@ -0,0 +1,409 @@ +/*- + * Copyright (c) 2003-2007 Tim Kientzle + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "archive_platform.h" + +__FBSDID("$FreeBSD: src/lib/libarchive/archive_write_set_compression_bzip2.c,v 1.13 2007/12/30 04:58:21 kientzle Exp $"); + +#ifdef HAVE_ERRNO_H +#include <errno.h> +#endif +#include <stdio.h> +#ifdef HAVE_STDLIB_H +#include <stdlib.h> +#endif +#ifdef HAVE_STRING_H +#include <string.h> +#endif +#ifdef HAVE_BZLIB_H +#include <bzlib.h> +#endif + +#include "archive.h" +#include "archive_private.h" +#include "archive_write_private.h" + +#ifndef HAVE_BZLIB_H +int +archive_write_set_compression_bzip2(struct archive *a) +{ + archive_set_error(a, ARCHIVE_ERRNO_MISC, + "bzip2 compression not supported on this platform"); + return (ARCHIVE_FATAL); +} +#else +/* Don't compile this if we don't have bzlib. */ + +struct private_data { + bz_stream stream; + int64_t total_in; + char *compressed; + size_t compressed_buffer_size; +}; + +struct private_config { + int compression_level; +}; + +/* + * Yuck. bzlib.h is not const-correct, so I need this one bit + * of ugly hackery to convert a const * pointer to a non-const pointer. + */ +#define SET_NEXT_IN(st,src) \ + (st)->stream.next_in = (char *)(uintptr_t)(const void *)(src) + +static int archive_compressor_bzip2_finish(struct archive_write *); +static int archive_compressor_bzip2_init(struct archive_write *); +static int archive_compressor_bzip2_options(struct archive_write *, + const char *, const char *); +static int archive_compressor_bzip2_write(struct archive_write *, + const void *, size_t); +static int drive_compressor(struct archive_write *, struct private_data *, + int finishing); + +/* + * Allocate, initialize and return an archive object. + */ +int +archive_write_set_compression_bzip2(struct archive *_a) +{ + struct archive_write *a = (struct archive_write *)_a; + struct private_config *config; + __archive_check_magic(&a->archive, ARCHIVE_WRITE_MAGIC, + ARCHIVE_STATE_NEW, "archive_write_set_compression_bzip2"); + config = malloc(sizeof(*config)); + if (config == NULL) { + archive_set_error(&a->archive, ENOMEM, "Out of memory"); + return (ARCHIVE_FATAL); + } + a->compressor.config = config; + a->compressor.finish = archive_compressor_bzip2_finish; + config->compression_level = 9; /* default */ + a->compressor.init = &archive_compressor_bzip2_init; + a->compressor.options = &archive_compressor_bzip2_options; + a->archive.compression_code = ARCHIVE_COMPRESSION_BZIP2; + a->archive.compression_name = "bzip2"; + return (ARCHIVE_OK); +} + +/* + * Setup callback. + */ +static int +archive_compressor_bzip2_init(struct archive_write *a) +{ + int ret; + struct private_data *state; + struct private_config *config; + + config = (struct private_config *)a->compressor.config; + if (a->client_opener != NULL) { + ret = (a->client_opener)(&a->archive, a->client_data); + if (ret != 0) + return (ret); + } + + state = (struct private_data *)malloc(sizeof(*state)); + if (state == NULL) { + archive_set_error(&a->archive, ENOMEM, + "Can't allocate data for compression"); + return (ARCHIVE_FATAL); + } + memset(state, 0, sizeof(*state)); + + state->compressed_buffer_size = a->bytes_per_block; + state->compressed = (char *)malloc(state->compressed_buffer_size); + + if (state->compressed == NULL) { + archive_set_error(&a->archive, ENOMEM, + "Can't allocate data for compression buffer"); + free(state); + return (ARCHIVE_FATAL); + } + + state->stream.next_out = state->compressed; + state->stream.avail_out = state->compressed_buffer_size; + a->compressor.write = archive_compressor_bzip2_write; + + /* Initialize compression library */ + ret = BZ2_bzCompressInit(&(state->stream), + config->compression_level, 0, 30); + if (ret == BZ_OK) { + a->compressor.data = state; + return (ARCHIVE_OK); + } + + /* Library setup failed: clean up. */ + archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC, + "Internal error initializing compression library"); + free(state->compressed); + free(state); + + /* Override the error message if we know what really went wrong. */ + switch (ret) { + case BZ_PARAM_ERROR: + archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC, + "Internal error initializing compression library: " + "invalid setup parameter"); + break; + case BZ_MEM_ERROR: + archive_set_error(&a->archive, ENOMEM, + "Internal error initializing compression library: " + "out of memory"); + break; + case BZ_CONFIG_ERROR: + archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC, + "Internal error initializing compression library: " + "mis-compiled library"); + break; + } + + return (ARCHIVE_FATAL); + +} + +/* + * Set write options. + */ +static int +archive_compressor_bzip2_options(struct archive_write *a, const char *key, + const char *value) +{ + struct private_config *config; + + config = (struct private_config *)a->compressor.config; + if (strcmp(key, "compression-level") == 0) { + if (value == NULL || !(value[0] >= '0' && value[0] <= '9') || + value[1] != '\0') + return (ARCHIVE_WARN); + config->compression_level = value[0] - '0'; + /* Make '0' be a synonym for '1'. */ + /* This way, bzip2 compressor supports the same 0..9 + * range of levels as gzip. */ + if (config->compression_level < 1) + config->compression_level = 1; + return (ARCHIVE_OK); + } + + return (ARCHIVE_WARN); +} + +/* + * Write data to the compressed stream. + * + * Returns ARCHIVE_OK if all data written, error otherwise. + */ +static int +archive_compressor_bzip2_write(struct archive_write *a, const void *buff, + size_t length) +{ + struct private_data *state; + + state = (struct private_data *)a->compressor.data; + if (a->client_writer == NULL) { + archive_set_error(&a->archive, ARCHIVE_ERRNO_PROGRAMMER, + "No write callback is registered? " + "This is probably an internal programming error."); + return (ARCHIVE_FATAL); + } + + /* Update statistics */ + state->total_in += length; + + /* Compress input data to output buffer */ + SET_NEXT_IN(state, buff); + state->stream.avail_in = length; + if (drive_compressor(a, state, 0)) + return (ARCHIVE_FATAL); + a->archive.file_position += length; + return (ARCHIVE_OK); +} + + +/* + * Finish the compression. + */ +static int +archive_compressor_bzip2_finish(struct archive_write *a) +{ + ssize_t block_length; + int ret; + struct private_data *state; + ssize_t target_block_length; + ssize_t bytes_written; + unsigned tocopy; + + ret = ARCHIVE_OK; + state = (struct private_data *)a->compressor.data; + if (state != NULL) { + if (a->client_writer == NULL) { + archive_set_error(&a->archive, + ARCHIVE_ERRNO_PROGRAMMER, + "No write callback is registered?\n" + "This is probably an internal programming error."); + ret = ARCHIVE_FATAL; + goto cleanup; + } + + /* By default, always pad the uncompressed data. */ + if (a->pad_uncompressed) { + tocopy = a->bytes_per_block - + (state->total_in % a->bytes_per_block); + while (tocopy > 0 && tocopy < (unsigned)a->bytes_per_block) { + SET_NEXT_IN(state, a->nulls); + state->stream.avail_in = tocopy < a->null_length ? + tocopy : a->null_length; + state->total_in += state->stream.avail_in; + tocopy -= state->stream.avail_in; + ret = drive_compressor(a, state, 0); + if (ret != ARCHIVE_OK) + goto cleanup; + } + } + + /* Finish compression cycle. */ + if ((ret = drive_compressor(a, state, 1))) + goto cleanup; + + /* Optionally, pad the final compressed block. */ + block_length = state->stream.next_out - state->compressed; + + /* Tricky calculation to determine size of last block. */ + target_block_length = block_length; + if (a->bytes_in_last_block <= 0) + /* Default or Zero: pad to full block */ + target_block_length = a->bytes_per_block; + else + /* Round length to next multiple of bytes_in_last_block. */ + target_block_length = a->bytes_in_last_block * + ( (block_length + a->bytes_in_last_block - 1) / + a->bytes_in_last_block); + if (target_block_length > a->bytes_per_block) + target_block_length = a->bytes_per_block; + if (block_length < target_block_length) { + memset(state->stream.next_out, 0, + target_block_length - block_length); + block_length = target_block_length; + } + + /* Write the last block */ + bytes_written = (a->client_writer)(&a->archive, a->client_data, + state->compressed, block_length); + + /* TODO: Handle short write of final block. */ + if (bytes_written <= 0) + ret = ARCHIVE_FATAL; + else { + a->archive.raw_position += ret; + ret = ARCHIVE_OK; + } + + /* Cleanup: shut down compressor, release memory, etc. */ +cleanup: + switch (BZ2_bzCompressEnd(&(state->stream))) { + case BZ_OK: + break; + default: + archive_set_error(&a->archive, ARCHIVE_ERRNO_PROGRAMMER, + "Failed to clean up compressor"); + ret = ARCHIVE_FATAL; + } + + free(state->compressed); + free(state); + } + /* Free configuration data even if we were never fully initialized. */ + free(a->compressor.config); + a->compressor.config = NULL; + return (ret); +} + +/* + * Utility function to push input data through compressor, writing + * full output blocks as necessary. + * + * Note that this handles both the regular write case (finishing == + * false) and the end-of-archive case (finishing == true). + */ +static int +drive_compressor(struct archive_write *a, struct private_data *state, int finishing) +{ + ssize_t bytes_written; + int ret; + + for (;;) { + if (state->stream.avail_out == 0) { + bytes_written = (a->client_writer)(&a->archive, + a->client_data, state->compressed, + state->compressed_buffer_size); + if (bytes_written <= 0) { + /* TODO: Handle this write failure */ + return (ARCHIVE_FATAL); + } else if ((size_t)bytes_written < state->compressed_buffer_size) { + /* Short write: Move remainder to + * front and keep filling */ + memmove(state->compressed, + state->compressed + bytes_written, + state->compressed_buffer_size - bytes_written); + } + + a->archive.raw_position += bytes_written; + state->stream.next_out = state->compressed + + state->compressed_buffer_size - bytes_written; + state->stream.avail_out = bytes_written; + } + + /* If there's nothing to do, we're done. */ + if (!finishing && state->stream.avail_in == 0) + return (ARCHIVE_OK); + + ret = BZ2_bzCompress(&(state->stream), + finishing ? BZ_FINISH : BZ_RUN); + + switch (ret) { + case BZ_RUN_OK: + /* In non-finishing case, did compressor + * consume everything? */ + if (!finishing && state->stream.avail_in == 0) + return (ARCHIVE_OK); + break; + case BZ_FINISH_OK: /* Finishing: There's more work to do */ + break; + case BZ_STREAM_END: /* Finishing: all done */ + /* Only occurs in finishing case */ + return (ARCHIVE_OK); + default: + /* Any other return value indicates an error */ + archive_set_error(&a->archive, + ARCHIVE_ERRNO_PROGRAMMER, + "Bzip2 compression failed;" + " BZ2_bzCompress() returned %d", + ret); + return (ARCHIVE_FATAL); + } + } +} + +#endif /* HAVE_BZLIB_H */ |