path: root/Modules/CPackRPM.cmake

# - The builtin (binary) CPack RPM generator (Unix only)
# CPackRPM may be used to create RPM package using CPack.
# CPackRPM is a CPack generator thus it uses the CPACK_XXX variables
# used by CPack : http://www.cmake.org/Wiki/CMake:CPackConfiguration
#
# However CPackRPM has specific features which are controlled by
# the specifics CPACK_RPM_XXX variables. You'll find a detailed usage on
# the wiki:
#  http://www.cmake.org/Wiki/CMake:CPackPackageGenerators#RPM_.28Unix_Only.29
# However as a handy reminder here comes the list of specific variables:
#
#  CPACK_RPM_PACKAGE_SUMMARY
#     Mandatory : YES
#     Default   : CPACK_PACKAGE_DESCRIPTION_SUMMARY
#     The RPM package summary
#  CPACK_RPM_PACKAGE_NAME
#     Mandatory : YES
#     Default   : CPACK_PACKAGE_NAME
#     The RPM package name
#  CPACK_RPM_PACKAGE_VERSION
#     Mandatory : YES
#     Default   : CPACK_PACKAGE_VERSION
#     The RPM package version
#  CPACK_RPM_PACKAGE_ARCHITECTURE
#     Mandatory : NO
#     Default   : -
#     The RPM package architecture. This may be set to "noarch" if you
#     know you are building a noarch package.
#  CPACK_RPM_PACKAGE_RELEASE
#     Mandatory : YES
#     Default   : 1
#     The RPM package release. This is the numbering of the RPM package
#     itself, i.e. the version of the packaging and not the version of the
#     content (see CPACK_RPM_PACKAGE_VERSION). One may change the default
#     value if the previous packaging was buggy and/or you want to put here
#     a fancy Linux distro specific numbering.
#  CPACK_RPM_PACKAGE_LICENSE
#     Mandatory : YES
#     Default   : "unknown"
#     The RPM package license policy.
#  CPACK_RPM_PACKAGE_GROUP
#     Mandatory : YES
#     Default   : "unknown"
#     The RPM package group.
#  CPACK_RPM_PACKAGE_VENDOR
#     Mandatory : YES
#     Default   : CPACK_PACKAGE_VENDOR if set or "unknown"
#     The RPM package vendor.
#  CPACK_RPM_PACKAGE_URL
#     Mandatory : NO
#     Default   : -
#     The projects URL.
#  CPACK_RPM_PACKAGE_DESCRIPTION
#     Mandatory : YES
#     Default   : CPACK_PACKAGE_DESCRIPTION_FILE if set or "no package description available"
#  CPACK_RPM_COMPRESSION_TYPE
#     Mandatory : NO
#     Default   : -
#     May be used to override RPM compression type to be used
#     to build the RPM. For example some Linux distribution now default
#     to lzma or xz compression whereas older cannot use such RPM.
#     Using this one can enforce compression type to be used.
#     Possible value are: lzma, xz, bzip2 and gzip.
#  CPACK_RPM_PACKAGE_REQUIRES
#     Mandatory : NO
#     Default   : -
#     May be used to set RPM dependencies (requires).
#     Note that you must enclose the complete requires string between quotes,
#     for example:
#     set(CPACK_RPM_PACKAGE_REQUIRES "python >= 2.5.0, cmake >= 2.8")
#  CPACK_RPM_PACKAGE_SUGGESTS
#     Mandatory : NO
#     Default   : -
#     May be used to set weak RPM dependencies (suggests).
#     Note that you must enclose the complete requires string between quotes.
#  CPACK_RPM_PACKAGE_PROVIDES
#     Mandatory : NO
#     Default   : -
#     May be used to set RPM dependencies (provides).
#  CPACK_RPM_PACKAGE_OBSOLETES
#     Mandatory : NO
#     Default   : -
#     May be used to set RPM packages that are obsoleted by this one.
#  CPACK_RPM_PACKAGE_RELOCATABLE
#     Mandatory : NO
#     Default   : CPACK_PACKAGE_RELOCATABLE
#     If this variable is set to TRUE or ON CPackRPM will try
#     to build a relocatable RPM package. A relocatable RPM may
#     be installed using rpm --prefix or --relocate in order to
#     install it at an alternate place see rpm(8).
#     Note that currently this may fail if CPACK_SET_DESTDIR is set to ON.
#     If CPACK_SET_DESTDIR is set then you will get a warning message
#     but if there is file installed with absolute path you'll get
#     unexpected behavior.
#  CPACK_RPM_SPEC_INSTALL_POST
#     Mandatory : NO
#     Default   : -
#     May be used to set an RPM post-install command inside the spec file.
#     For example setting it to "/bin/true" may be used to prevent
#     rpmbuild to strip binaries.
#  CPACK_RPM_SPEC_MORE_DEFINE
#     Mandatory : NO
#     Default   : -
#     May be used to add any %define lines to the generated spec file.
#  CPACK_RPM_PACKAGE_DEBUG
#     Mandatory : NO
#     Default   : -
#     May be set when invoking cpack in order to trace debug information
#     during CPack RPM run. For example you may launch CPack like this
#     cpack -D CPACK_RPM_PACKAGE_DEBUG=1 -G RPM
#  CPACK_RPM_USER_BINARY_SPECFILE
#     Mandatory : NO
#     Default   : -
#     May be set by the user in order to specify a USER binary spec file
#     to be used by CPackRPM instead of generating the file.
#     The specified file will be processed by CONFIGURE_FILE( @ONLY).
#  CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE
#     Mandatory : NO
#     Default   : -
#     If set CPack will generate a template for USER specified binary
#     spec file and stop with an error. For example launch CPack like this
#     cpack -D CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE=1 -G RPM
#     The user may then use this file in order to hand-craft is own
#     binary spec file which may be used with CPACK_RPM_USER_BINARY_SPECFILE.
#  CPACK_RPM_PRE_INSTALL_SCRIPT_FILE
#  CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE
#     Mandatory : NO
#     Default   : -
#     May be used to embbed a pre (un)installation script in the spec file.
#     The refered script file(s) will be read and directly
#     put after the %pre or %preun section
#     One may verify which scriptlet has been included with
#      rpm -qp --scripts  package.rpm
#  CPACK_RPM_POST_INSTALL_SCRIPT_FILE
#  CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE
#     Mandatory : NO
#     Default   : -
#     May be used to embbed a post (un)installation script in the spec file.
#     The refered script file(s) will be read and directly
#     put after the %post or %postun section
#     One may verify which scriptlet has been included with
#      rpm -qp --scripts  package.rpm
#  CPACK_RPM_CHANGELOG_FILE
#     Mandatory : NO
#     Default   : -
#     May be used to embbed a changelog in the spec file.
#     The refered file will be read and directly  put after the %changelog
#     section.

#=============================================================================
# Copyright 2007-2009 Kitware, Inc.
#
# Distributed under the OSI-approved BSD License (the "License");
# see accompanying file Copyright.txt for details.
#
# This software is distributed WITHOUT ANY WARRANTY; without even the
# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the License for more information.
#=============================================================================
# (To distribute this file outside of CMake, substitute the full
#  License text for the above reference.)

# Author: Eric Noulard with the help of Alexander Neundorf.

IF(CMAKE_BINARY_DIR)
  MESSAGE(FATAL_ERROR "CPackRPM.cmake may only be used by CPack internally.")
ENDIF(CMAKE_BINARY_DIR)

IF(NOT UNIX)
  MESSAGE(FATAL_ERROR "CPackRPM.cmake may only be used under UNIX.")
ENDIF(NOT UNIX)

# rpmbuild is the basic command for building RPM package
# it may be a simple (symbolic) link to rpm command.
FIND_PROGRAM(RPMBUILD_EXECUTABLE rpmbuild)

# Check version of the rpmbuild tool this would be easier to
# track bugs with users and CPackRPM debug mode.
# We may use RPM version in order to check for available version dependent features
IF(RPMBUILD_EXECUTABLE)
  execute_process(COMMAND ${RPMBUILD_EXECUTABLE} --version
                  OUTPUT_VARIABLE _TMP_VERSION
                  ERROR_QUIET
                  OUTPUT_STRIP_TRAILING_WHITESPACE)
  string(REGEX REPLACE "^.*\ " ""
         RPMBUILD_EXECUTABLE_VERSION
         ${_TMP_VERSION})
  IF(CPACK_RPM_PACKAGE_DEBUG)
    MESSAGE("CPackRPM:Debug: rpmbuild version is <${RPMBUILD_EXECUTABLE_VERSION}>")
  ENDIF(CPACK_RPM_PACKAGE_DEBUG)
ENDIF(RPMBUILD_EXECUTABLE)

IF(NOT RPMBUILD_EXECUTABLE)
  MESSAGE(FATAL_ERROR "RPM package requires rpmbuild executable")
ENDIF(NOT RPMBUILD_EXECUTABLE)

# We may use RPM version in the future in order
# to shut down warning about space in buildtree
# some recent RPM version should support space in different places.
# not checked [yet].
IF(CPACK_TOPLEVEL_DIRECTORY MATCHES ".* .*")
  MESSAGE(FATAL_ERROR "${RPMBUILD_EXECUTABLE} can't handle paths with spaces, use a build directory without spaces for building RPMs.")
ENDIF(CPACK_TOPLEVEL_DIRECTORY MATCHES ".* .*")

# If rpmbuild is found
# we try to discover alien since we may be on non RPM distro like Debian.
# In this case we may try to to use more advanced features
# like generating RPM directly from DEB using alien.
# FIXME feature not finished (yet)
FIND_PROGRAM(ALIEN_EXECUTABLE alien)
IF(ALIEN_EXECUTABLE)
  MESSAGE(STATUS "alien found, we may be on a Debian based distro.")
ENDIF(ALIEN_EXECUTABLE)

#
# Use user-defined RPM specific variables value
# or generate reasonable default value from
# CPACK_xxx generic values.
# The variables comes from the needed (mandatory or not)
# values found in the RPM specification file aka ".spec" file.
# The variables which may/should be defined are:
#

# CPACK_RPM_PACKAGE_SUMMARY (mandatory)
IF(NOT CPACK_RPM_PACKAGE_SUMMARY)
  # if neither var is defined lets use the name as summary
  IF(NOT CPACK_PACKAGE_DESCRIPTION_SUMMARY)
    STRING(TOLOWER "${CPACK_PACKAGE_NAME}" CPACK_RPM_PACKAGE_SUMMARY)
  ELSE(NOT CPACK_PACKAGE_DESCRIPTION_SUMMARY)
    SET(CPACK_RPM_PACKAGE_SUMMARY ${CPACK_PACKAGE_DESCRIPTION_SUMMARY})
  ENDIF(NOT CPACK_PACKAGE_DESCRIPTION_SUMMARY)
ENDIF(NOT CPACK_RPM_PACKAGE_SUMMARY)

# CPACK_RPM_PACKAGE_NAME (mandatory)
IF(NOT CPACK_RPM_PACKAGE_NAME)
  STRING(TOLOWER "${CPACK_PACKAGE_NAME}" CPACK_RPM_PACKAGE_NAME)
ENDIF(NOT CPACK_RPM_PACKAGE_NAME)

# CPACK_RPM_PACKAGE_VERSION (mandatory)
IF(NOT CPACK_RPM_PACKAGE_VERSION)
  IF(NOT CPACK_PACKAGE_VERSION)
    MESSAGE(FATAL_ERROR "RPM package requires a package version")
  ENDIF(NOT CPACK_PACKAGE_VERSION)
  SET(CPACK_RPM_PACKAGE_VERSION ${CPACK_PACKAGE_VERSION})
ENDIF(NOT CPACK_RPM_PACKAGE_VERSION)
# Replace '-' in version with '_'
# '-' character is  an Illegal RPM version character
# it is illegal because it is used to separate
# RPM "Version" from RPM "Release"
STRING(REPLACE "-" "_" CPACK_RPM_PACKAGE_VERSION ${CPACK_RPM_PACKAGE_VERSION})

# CPACK_RPM_PACKAGE_ARCHITECTURE (optional)
IF(CPACK_RPM_PACKAGE_ARCHITECTURE)
  SET(TMP_RPM_BUILDARCH "Buildarch: ${CPACK_RPM_PACKAGE_ARCHITECTURE}")
  IF(CPACK_RPM_PACKAGE_DEBUG)
    MESSAGE("CPackRPM:Debug: using user-specified build arch = ${CPACK_RPM_PACKAGE_ARCHITECTURE}")
  ENDIF(CPACK_RPM_PACKAGE_DEBUG)
ELSE(CPACK_RPM_PACKAGE_ARCHITECTURE)
  SET(TMP_RPM_BUILDARCH "")
ENDIF(CPACK_RPM_PACKAGE_ARCHITECTURE)

# CPACK_RPM_PACKAGE_RELEASE
# The RPM release is the numbering of the RPM package ITSELF
# this is the version of the PACKAGING and NOT the version
# of the CONTENT of the package.
# You may well need to generate a new RPM package release
# without changing the version of the packaged software.
# This is the case when the packaging is buggy (not) the software :=)
# If not set, 1 is a good candidate
IF(NOT CPACK_RPM_PACKAGE_RELEASE)
  SET(CPACK_RPM_PACKAGE_RELEASE 1)
ENDIF(NOT CPACK_RPM_PACKAGE_RELEASE)

# CPACK_RPM_PACKAGE_LICENSE
IF(NOT CPACK_RPM_PACKAGE_LICENSE)
  SET(CPACK_RPM_PACKAGE_LICENSE "unknown")
ENDIF(NOT CPACK_RPM_PACKAGE_LICENSE)

# CPACK_RPM_PACKAGE_GROUP
IF(NOT CPACK_RPM_PACKAGE_GROUP)
  SET(CPACK_RPM_PACKAGE_GROUP "unknown")
ENDIF(NOT CPACK_RPM_PACKAGE_GROUP)

# CPACK_RPM_PACKAGE_VENDOR
IF(NOT CPACK_RPM_PACKAGE_VENDOR)
  IF(CPACK_PACKAGE_VENDOR)
    SET(CPACK_RPM_PACKAGE_VENDOR "${CPACK_PACKAGE_VENDOR}")
  ELSE(CPACK_PACKAGE_VENDOR)
    SET(CPACK_RPM_PACKAGE_VENDOR "unknown")
  ENDIF(CPACK_PACKAGE_VENDOR)
ENDIF(NOT CPACK_RPM_PACKAGE_VENDOR)

# CPACK_RPM_PACKAGE_SOURCE
# The name of the source tarball in case we generate a source RPM

# CPACK_RPM_PACKAGE_DESCRIPTION
# The variable content may be either
#   - explicitly given by the user or
#   - filled with the content of CPACK_PACKAGE_DESCRIPTION_FILE
#     if it is defined
#   - set to a default value
#
IF (NOT CPACK_RPM_PACKAGE_DESCRIPTION)
        IF (CPACK_PACKAGE_DESCRIPTION_FILE)
                FILE(READ ${CPACK_PACKAGE_DESCRIPTION_FILE} CPACK_RPM_PACKAGE_DESCRIPTION)
        ELSE (CPACK_PACKAGE_DESCRIPTION_FILE)
                SET(CPACK_RPM_PACKAGE_DESCRIPTION "no package description available")
        ENDIF (CPACK_PACKAGE_DESCRIPTION_FILE)
ENDIF (NOT CPACK_RPM_PACKAGE_DESCRIPTION)

# CPACK_RPM_COMPRESSION_TYPE
#
IF (CPACK_RPM_COMPRESSION_TYPE)
   IF(CPACK_RPM_PACKAGE_DEBUG)
     MESSAGE("CPackRPM:Debug: User Specified RPM compression type: ${CPACK_RPM_COMPRESSION_TYPE}")
   ENDIF(CPACK_RPM_PACKAGE_DEBUG)
   IF(CPACK_RPM_COMPRESSION_TYPE STREQUAL "lzma")
     SET(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w9.lzdio")
   ENDIF(CPACK_RPM_COMPRESSION_TYPE STREQUAL "lzma")
   IF(CPACK_RPM_COMPRESSION_TYPE STREQUAL "xz")
     SET(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w7.xzdio")
   ENDIF(CPACK_RPM_COMPRESSION_TYPE STREQUAL "xz")
   IF(CPACK_RPM_COMPRESSION_TYPE STREQUAL "bzip2")
     SET(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w9.bzdio")
   ENDIF(CPACK_RPM_COMPRESSION_TYPE STREQUAL "bzip2")
   IF(CPACK_RPM_COMPRESSION_TYPE STREQUAL "gzip")
     SET(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w9.gzdio")
   ENDIF(CPACK_RPM_COMPRESSION_TYPE STREQUAL "gzip")
ELSE(CPACK_RPM_COMPRESSION_TYPE)
   SET(CPACK_RPM_COMPRESSION_TYPE_TMP "")
ENDIF(CPACK_RPM_COMPRESSION_TYPE)

if(CPACK_PACKAGE_RELOCATABLE)
    set(CPACK_RPM_PACKAGE_RELOCATABLE TRUE)
endif(CPACK_PACKAGE_RELOCATABLE)
if(CPACK_RPM_PACKAGE_RELOCATABLE)
  if(CPACK_RPM_PACKAGE_DEBUG)
    message("CPackRPM:Debug: Trying to build a relocatable package")
  endif(CPACK_RPM_PACKAGE_DEBUG)
  if(CPACK_SET_DESTDIR AND (NOT CPACK_SET_DESTDIR STREQUAL "I_ON"))
    message("CPackRPM:Warning: CPACK_SET_DESTDIR is set (=${CPACK_SET_DESTDIR}) while requesting a relocatable package (CPACK_RPM_PACKAGE_RELOCATABLE is set): this is not supported, the package won't be relocatable.")
  else(CPACK_SET_DESTDIR AND (NOT CPACK_SET_DESTDIR STREQUAL "I_ON"))
    set(CPACK_RPM_PACKAGE_PREFIX ${CPACK_PACKAGING_INSTALL_PREFIX})
  endif(CPACK_SET_DESTDIR AND (NOT CPACK_SET_DESTDIR STREQUAL "I_ON"))
endif(CPACK_RPM_PACKAGE_RELOCATABLE)

# check if additional fields for RPM spec header are given
FOREACH(_RPM_SPEC_HEADER URL REQUIRES SUGGESTS PROVIDES OBSOLETES PREFIX)
  IF(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER})
    STRING(LENGTH ${_RPM_SPEC_HEADER} _PACKAGE_HEADER_STRLENGTH)
    MATH(EXPR _PACKAGE_HEADER_STRLENGTH "${_PACKAGE_HEADER_STRLENGTH} - 1")
    STRING(SUBSTRING ${_RPM_SPEC_HEADER} 1 ${_PACKAGE_HEADER_STRLENGTH} _PACKAGE_HEADER_TAIL)
    STRING(TOLOWER "${_PACKAGE_HEADER_TAIL}" _PACKAGE_HEADER_TAIL)
    STRING(SUBSTRING ${_RPM_SPEC_HEADER} 0 1 _PACKAGE_HEADER_NAME)
    SET(_PACKAGE_HEADER_NAME "${_PACKAGE_HEADER_NAME}${_PACKAGE_HEADER_TAIL}")
    IF(CPACK_RPM_PACKAGE_DEBUG)
      MESSAGE("CPackRPM:Debug: User defined ${_PACKAGE_HEADER_NAME}:\n ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}}")
    ENDIF(CPACK_RPM_PACKAGE_DEBUG)
    SET(TMP_RPM_${_RPM_SPEC_HEADER} "${_PACKAGE_HEADER_NAME}: ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}}")
  ENDIF(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER})
ENDFOREACH(_RPM_SPEC_HEADER)

# CPACK_RPM_SPEC_INSTALL_POST
# May be used to define a RPM post intallation script
# for example setting it to "/bin/true" may prevent
# rpmbuild from stripping binaries.
IF(CPACK_RPM_SPEC_INSTALL_POST)
  IF(CPACK_RPM_PACKAGE_DEBUG)
    MESSAGE("CPackRPM:Debug: User defined CPACK_RPM_SPEC_INSTALL_POST = ${CPACK_RPM_SPEC_INSTALL_POST}")
  ENDIF(CPACK_RPM_PACKAGE_DEBUG)
  SET(TMP_RPM_SPEC_INSTALL_POST "%define __spec_install_post ${CPACK_RPM_SPEC_INSTALL_POST}")
ENDIF(CPACK_RPM_SPEC_INSTALL_POST)

# CPACK_RPM_POST_INSTALL_SCRIPT_FILE
# CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE
# May be used to embbed a post (un)installation script in the spec file.
# The refered script file(s) will be read and directly
# put after the %post or %postun section
if(CPACK_RPM_POST_INSTALL_SCRIPT_FILE)
  if(EXISTS ${CPACK_RPM_POST_INSTALL_SCRIPT_FILE})
    file(READ ${CPACK_RPM_POST_INSTALL_SCRIPT_FILE} CPACK_RPM_SPEC_POSTINSTALL)
  else(EXISTS ${CPACK_RPM_POST_INSTALL_SCRIPT_FILE})
    message("CPackRPM:Warning: CPACK_RPM_POST_INSTALL_SCRIPT_FILE <${CPACK_RPM_POST_INSTALL_SCRIPT_FILE}> does not exists - ignoring")
  endif(EXISTS ${CPACK_RPM_POST_INSTALL_SCRIPT_FILE})
endif(CPACK_RPM_POST_INSTALL_SCRIPT_FILE)

if(CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE)
  if(EXISTS ${CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE})
    file(READ ${CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE} CPACK_RPM_SPEC_POSTUNINSTALL)
  else(EXISTS ${CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE})
    message("CPackRPM:Warning: CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE <${CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE}> does not exists - ignoring")
  endif(EXISTS ${CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE})
endif(CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE)

# CPACK_RPM_PRE_INSTALL_SCRIPT_FILE
# CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE
# May be used to embed a pre (un)installation script in the spec file.
# The refered script file(s) will be read and directly
# put after the %pre or %preun section
if(CPACK_RPM_PRE_INSTALL_SCRIPT_FILE)
  if(EXISTS ${CPACK_RPM_PRE_INSTALL_SCRIPT_FILE})
    file(READ ${CPACK_RPM_PRE_INSTALL_SCRIPT_FILE} CPACK_RPM_SPEC_PREINSTALL)
  else(EXISTS ${CPACK_RPM_PRE_INSTALL_SCRIPT_FILE})
    message("CPackRPM:Warning: CPACK_RPM_PRE_INSTALL_SCRIPT_FILE <${CPACK_RPM_PRE_INSTALL_SCRIPT_FILE}> does not exists - ignoring")
  endif(EXISTS ${CPACK_RPM_PRE_INSTALL_SCRIPT_FILE})
endif(CPACK_RPM_PRE_INSTALL_SCRIPT_FILE)

if(CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE)
  if(EXISTS ${CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE})
    file(READ ${CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE} CPACK_RPM_SPEC_PREUNINSTALL)
  else(EXISTS ${CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE})
    message("CPackRPM:Warning: CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE <${CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE}> does not exists - ignoring")
  endif(EXISTS ${CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE})
endif(CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE)

# CPACK_RPM_CHANGELOG_FILE
# May be used to embed a changelog in the spec file.
# The refered file will be read and directly put after the %changelog section
if(CPACK_RPM_CHANGELOG_FILE)
  if(EXISTS ${CPACK_RPM_CHANGELOG_FILE})
    file(READ ${CPACK_RPM_CHANGELOG_FILE} CPACK_RPM_SPEC_CHANGELOG)
  else(EXISTS ${CPACK_RPM_CHANGELOG_FILE})
    message(SEND_ERROR "CPackRPM:Warning: CPACK_RPM_CHANGELOG_FILE <${CPACK_RPM_CHANGELOG_FILE}> does not exists - ignoring")
  endif(EXISTS ${CPACK_RPM_CHANGELOG_FILE})
else(CPACK_RPM_CHANGELOG_FILE)
  set(CPACK_RPM_SPEC_CHANGELOG "* Sun Jul 4 2010 Erk <eric.noulard@gmail.com>\n  Generated by CPack RPM (no Changelog file were provided)")
endif(CPACK_RPM_CHANGELOG_FILE)

# CPACK_RPM_SPEC_MORE_DEFINE
# This is a generated spec rpm file spaceholder
IF(CPACK_RPM_SPEC_MORE_DEFINE)
  IF(CPACK_RPM_PACKAGE_DEBUG)
    MESSAGE("CPackRPM:Debug: User defined more define spec line specified:\n ${CPACK_RPM_SPEC_MORE_DEFINE}")
  ENDIF(CPACK_RPM_PACKAGE_DEBUG)
ENDIF(CPACK_RPM_SPEC_MORE_DEFINE)

# Now we may create the RPM build tree structure
SET(CPACK_RPM_ROOTDIR "${CPACK_TOPLEVEL_DIRECTORY}")
MESSAGE(STATUS "CPackRPM:Debug: Using CPACK_RPM_ROOTDIR=${CPACK_RPM_ROOTDIR}")
# Prepare RPM build tree
FILE(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR})
FILE(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/tmp)
FILE(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/BUILD)
FILE(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/RPMS)
FILE(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/SOURCES)
FILE(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/SPECS)
FILE(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/SRPMS)

#SET(CPACK_RPM_FILE_NAME "${CPACK_RPM_PACKAGE_NAME}-${CPACK_RPM_PACKAGE_VERSION}-${CPACK_RPM_PACKAGE_RELEASE}-${CPACK_RPM_PACKAGE_ARCHITECTURE}.rpm")
SET(CPACK_RPM_FILE_NAME "${CPACK_OUTPUT_FILE_NAME}")
# it seems rpmbuild can't handle spaces in the path
# neither escaping (as below) nor putting quotes around the path seem to help
#STRING(REGEX REPLACE " " "\\\\ " CPACK_RPM_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}")
SET(CPACK_RPM_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}")

# Use files tree to construct files command (spec file)
# We should not forget to include symlinks (thus -o -type l)
# We must remove the './' due to the local search and escape the
# file name by enclosing it between double quotes (thus the sed)
# Then we must authorize any man pages extension (adding * at the end)
# because rpmbuild may automatically compress those files
EXECUTE_PROCESS(COMMAND find -type f -o -type l
               COMMAND sed {s:.*/man.*/.*:&*:}
               COMMAND sed {s/\\.\\\(.*\\\)/\"\\1\"/}
               WORKING_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}"
               OUTPUT_VARIABLE CPACK_RPM_INSTALL_FILES)

if (CPACK_ABSOLUTE_DESTINATION_FILES)
  IF(CPACK_RPM_PACKAGE_DEBUG)
    message("CPackRPM:Debug: Handling Absolute Destination Files: ${CPACK_ABSOLUTE_DESTINATION_FILES}")
  ENDIF(CPACK_RPM_PACKAGE_DEBUG)
  # Remove trailing space
  string(STRIP "${CPACK_RPM_INSTALL_FILES}" CPACK_RPM_INSTALL_FILES_LIST)
  # Transform endline separated - string into CMake List
  string(REPLACE "\n" ";" CPACK_RPM_INSTALL_FILES_LIST "${CPACK_RPM_INSTALL_FILES_LIST}")
  # Remove unecessary quotes
  string(REPLACE "\"" "" CPACK_RPM_INSTALL_FILES_LIST "${CPACK_RPM_INSTALL_FILES_LIST}")
  # Remove ABSOLUTE install file from INSTALL FILE LIST
  list(REMOVE_ITEM CPACK_RPM_INSTALL_FILES_LIST ${CPACK_ABSOLUTE_DESTINATION_FILES})
  # Rebuild INSTALL_FILES
  set(CPACK_RPM_INSTALL_FILES "")
  foreach(F IN LISTS CPACK_RPM_INSTALL_FILES_LIST)
    set(CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}\"${F}\"\n")
  endforeach(F)
  # Build ABSOLUTE_INSTALL_FILES
  set(CPACK_RPM_ABSOLUTE_INSTALL_FILES "")
  foreach(F IN LISTS CPACK_ABSOLUTE_DESTINATION_FILES)
    set(CPACK_RPM_ABSOLUTE_INSTALL_FILES "${CPACK_RPM_ABSOLUTE_INSTALL_FILES}%config \"${F}\"\n")
  endforeach(F)
  IF(CPACK_RPM_PACKAGE_DEBUG)
    message("CPackRPM:Debug: CPACK_RPM_ABSOLUTE_INSTALL_FILES=${CPACK_RPM_ABSOLUTE_INSTALL_FILES}")
    message("CPackRPM:Debug: CPACK_RPM_INSTALL_FILES=${CPACK_RPM_INSTALL_FILES}")
  ENDIF(CPACK_RPM_PACKAGE_DEBUG)
endif(CPACK_ABSOLUTE_DESTINATION_FILES)

# The name of the final spec file to be used by rpmbuild
SET(CPACK_RPM_BINARY_SPECFILE "${CPACK_RPM_ROOTDIR}/SPECS/${CPACK_RPM_PACKAGE_NAME}.spec")

# Print out some debug information if we were asked for that
IF(CPACK_RPM_PACKAGE_DEBUG)
   MESSAGE("CPackRPM:Debug: CPACK_TOPLEVEL_DIRECTORY          = ${CPACK_TOPLEVEL_DIRECTORY}")
   MESSAGE("CPackRPM:Debug: CPACK_TOPLEVEL_TAG                = ${CPACK_TOPLEVEL_TAG}")
   MESSAGE("CPackRPM:Debug: CPACK_TEMPORARY_DIRECTORY         = ${CPACK_TEMPORARY_DIRECTORY}")
   MESSAGE("CPackRPM:Debug: CPACK_OUTPUT_FILE_NAME            = ${CPACK_OUTPUT_FILE_NAME}")
   MESSAGE("CPackRPM:Debug: CPACK_OUTPUT_FILE_PATH            = ${CPACK_OUTPUT_FILE_PATH}")
   MESSAGE("CPackRPM:Debug: CPACK_PACKAGE_FILE_NAME           = ${CPACK_PACKAGE_FILE_NAME}")
   MESSAGE("CPackRPM:Debug: CPACK_RPM_BINARY_SPECFILE         = ${CPACK_RPM_BINARY_SPECFILE}")
   MESSAGE("CPackRPM:Debug: CPACK_PACKAGE_INSTALL_DIRECTORY   = ${CPACK_PACKAGE_INSTALL_DIRECTORY}")
   MESSAGE("CPackRPM:Debug: CPACK_TEMPORARY_PACKAGE_FILE_NAME = ${CPACK_TEMPORARY_PACKAGE_FILE_NAME}")
ENDIF(CPACK_RPM_PACKAGE_DEBUG)

# USER generated spec file handling.
# We should generate a spec file template:
#  - either because the user asked for it : CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE
#  - or the user did not provide one : NOT CPACK_RPM_USER_BINARY_SPECFILE
#
IF(CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE OR NOT CPACK_RPM_USER_BINARY_SPECFILE)
   FILE(WRITE ${CPACK_RPM_BINARY_SPECFILE}.in
      "# -*- rpm-spec -*-
BuildRoot:      \@CPACK_RPM_DIRECTORY\@/\@CPACK_PACKAGE_FILE_NAME\@
Summary:        \@CPACK_RPM_PACKAGE_SUMMARY\@
Name:           \@CPACK_RPM_PACKAGE_NAME\@
Version:        \@CPACK_RPM_PACKAGE_VERSION\@
Release:        \@CPACK_RPM_PACKAGE_RELEASE\@
License:        \@CPACK_RPM_PACKAGE_LICENSE\@
Group:          \@CPACK_RPM_PACKAGE_GROUP\@
Vendor:         \@CPACK_RPM_PACKAGE_VENDOR\@
\@TMP_RPM_URL\@
\@TMP_RPM_REQUIRES\@
\@TMP_RPM_PROVIDES\@
\@TMP_RPM_OBSOLETES\@
\@TMP_RPM_BUILDARCH\@
\@TMP_RPM_PREFIX\@

%define _rpmdir \@CPACK_RPM_DIRECTORY\@
%define _rpmfilename \@CPACK_RPM_FILE_NAME\@
%define _unpackaged_files_terminate_build 0
%define _topdir \@CPACK_RPM_DIRECTORY\@
\@TMP_RPM_SPEC_INSTALL_POST\@
\@CPACK_RPM_SPEC_MORE_DEFINE\@
\@CPACK_RPM_COMPRESSION_TYPE_TMP\@

%description
\@CPACK_RPM_PACKAGE_DESCRIPTION\@

# This is a shortcutted spec file generated by CMake RPM generator
# we skip _install step because CPack does that for us.
# We do only save CPack installed tree in _prepr
# and then restore it in build.
%prep
mv $RPM_BUILD_ROOT \@CPACK_TOPLEVEL_DIRECTORY\@/tmpBBroot

#p build

%install
if [ -e $RPM_BUILD_ROOT ];
then
  mv \@CPACK_TOPLEVEL_DIRECTORY\@/tmpBBroot/* $RPM_BUILD_ROOT
else
  mv \@CPACK_TOPLEVEL_DIRECTORY\@/tmpBBroot $RPM_BUILD_ROOT
fi

%clean

%post
\@CPACK_RPM_SPEC_POSTINSTALL\@

%postun
\@CPACK_RPM_SPEC_POSTUNINSTALL\@

%pre
\@CPACK_RPM_SPEC_PREINSTALL\@

%preun
\@CPACK_RPM_SPEC_PREUNINSTALL\@

%files
%defattr(-,root,root,-)
${CPACK_RPM_INSTALL_FILES}
${CPACK_RPM_ABSOLUTE_INSTALL_FILES}

%changelog
\@CPACK_RPM_SPEC_CHANGELOG\@
")
  # Stop here if we were asked to only generate a template USER spec file
  # The generated file may then be used as a template by user who wants
  # to customize their own spec file.
  IF(CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE)
     MESSAGE(FATAL_ERROR "CPackRPM: STOP here Generated USER binary spec file templare is: ${CPACK_RPM_BINARY_SPECFILE}.in")
  ENDIF(CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE)
ENDIF(CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE OR NOT CPACK_RPM_USER_BINARY_SPECFILE)

# After that we may either use a user provided spec file
# or generate one using appropriate variables value.
IF(CPACK_RPM_USER_BINARY_SPECFILE)
  # User may have specified SPECFILE just use it
  MESSAGE("CPackRPM: Will use USER specified spec file: ${CPACK_RPM_USER_BINARY_SPECFILE}")
  # The user provided file is processed for @var replacement
  CONFIGURE_FILE(${CPACK_RPM_USER_BINARY_SPECFILE} ${CPACK_RPM_BINARY_SPECFILE} @ONLY)
ELSE(CPACK_RPM_USER_BINARY_SPECFILE)
  # No User specified spec file, will use the generated spec file
  MESSAGE("CPackRPM: Will use GENERATED spec file: ${CPACK_RPM_BINARY_SPECFILE}")
  # Note the just created file is processed for @var replacement
  CONFIGURE_FILE(${CPACK_RPM_BINARY_SPECFILE}.in ${CPACK_RPM_BINARY_SPECFILE} @ONLY)
ENDIF(CPACK_RPM_USER_BINARY_SPECFILE)

IF(RPMBUILD_EXECUTABLE)
  # Now call rpmbuild using the SPECFILE
  EXECUTE_PROCESS(
    COMMAND "${RPMBUILD_EXECUTABLE}" -bb
            --buildroot "${CPACK_RPM_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}"
            "${CPACK_RPM_BINARY_SPECFILE}"
    WORKING_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}"
    ERROR_FILE "${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild.err"
    OUTPUT_FILE "${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild.out")
  IF(CPACK_RPM_PACKAGE_DEBUG)
    MESSAGE("CPackRPM:Debug: You may consult rpmbuild logs in: ")
    MESSAGE("CPackRPM:Debug:    - ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild.err")
    MESSAGE("CPackRPM:Debug:    - ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild.out")
  ENDIF(CPACK_RPM_PACKAGE_DEBUG)
ELSE(RPMBUILD_EXECUTABLE)
  IF(ALIEN_EXECUTABLE)
    MESSAGE(FATAL_ERROR "RPM packaging through alien not done (yet)")
  ENDIF(ALIEN_EXECUTABLE)
ENDIF(RPMBUILD_EXECUTABLE)