diff options
Diffstat (limited to 'docs/plat/hikey.rst')
-rw-r--r-- | docs/plat/hikey.rst | 156 |
1 files changed, 156 insertions, 0 deletions
diff --git a/docs/plat/hikey.rst b/docs/plat/hikey.rst new file mode 100644 index 000000000..027e14c7c --- /dev/null +++ b/docs/plat/hikey.rst @@ -0,0 +1,156 @@ +Description +=========== + +HiKey is one of 96boards. Hisilicon Kirin6220 processor is installed on HiKey. + +More information are listed in `link`_. + +How to build +============ + +Code Locations +-------------- + +- ARM Trusted Firmware: + `link <https://github.com/ARM-software/arm-trusted-firmware>`__ + +- edk2: + `link <https://github.com/96boards-hikey/edk2/tree/testing/hikey960_v2.5>`__ + +- OpenPlatformPkg: + `link <https://github.com/96boards-hikey/OpenPlatformPkg/tree/testing/hikey960_v1.3.4>`__ + +- l-loader: + `link <https://github.com/96boards-hikey/l-loader/tree/testing/hikey960_v1.2>`__ + +- uefi-tools: + `link <https://github.com/96boards-hikey/uefi-tools/tree/testing/hikey960_v1>`__ + +- atf-fastboot: + `link <https://github.com/96boards-hikey/atf-fastboot/tree/master>`__ + +Build Procedure +--------------- + +- Fetch all the above repositories into local host. + Make all the repositories in the same ${BUILD\_PATH}. + +- Create the symbol link to OpenPlatformPkg in edk2. + + .. code:: shell + + $cd ${BUILD_PATH}/edk2 + $ln -sf ../OpenPlatformPkg + +- Prepare AARCH64 && AARCH32 toolchain. Prepare python. + +- If your hikey hardware is built by CircuitCo, update *uefi-tools/platform.config* first. *(optional)* + **Uncomment the below sentence. Otherwise, UEFI can't output messages on serial + console on hikey.** + + .. code:: shell + + BUILDFLAGS=-DSERIAL_BASE=0xF8015000 + + If your hikey hardware is built by LeMarker, nothing to do. + +- Build it as debug mode. Create your own build script file or you could refer to **build\_uefi.sh** in l-loader git repository. + + .. code:: shell + + BUILD_OPTION=DEBUG + export AARCH64_TOOLCHAIN=GCC5 + export UEFI_TOOLS_DIR=${BUILD_PATH}/uefi-tools + export EDK2_DIR=${BUILD_PATH}/edk2 + EDK2_OUTPUT_DIR=${EDK2_DIR}/Build/HiKey/${BUILD_OPTION}_${AARCH64_TOOLCHAIN} + # Build fastboot for ARM Trust Firmware. It's used for recovery mode. + cd ${BUILD_PATH}/atf-fastboot + CROSS_COMPILE=aarch64-linux-gnu- make PLAT=hikey DEBUG=1 + # Convert DEBUG/RELEASE to debug/release + FASTBOOT_BUILD_OPTION=$(echo ${BUILD_OPTION} | tr '[A-Z]' '[a-z]') + cd ${EDK2_DIR} + # Build UEFI & ARM Trust Firmware + ${UEFI_TOOLS_DIR}/uefi-build.sh -b ${BUILD_OPTION} -a ../arm-trusted-firmware hikey + # Generate l-loader.bin + cd ${BUILD_PATH}/l-loader + ln -sf ${EDK2_OUTPUT_DIR}/FV/bl1.bin + ln -sf ${EDK2_OUTPUT_DIR}/FV/fip.bin + ln -sf ${BUILD_PATH}/atf-fastboot/build/hikey/${FASTBOOT_BUILD_OPTION}/bl1.bin fastboot.bin + python gen_loader.py -o l-loader.bin --img_bl1=bl1.bin --img_ns_bl1u=BL33_AP_UEFI.fd + arm-linux-gnueabihf-gcc -c -o start.o start.S + arm-linux-gnueabihf-ld -Bstatic -Tl-loader.lds -Ttext 0xf9800800 start.o -o loader + arm-linux-gnueabihf-objcopy -O binary loader temp + python gen_loader_hikey.py -o l-loader.bin --img_loader=temp --img_bl1=bl1.bin --img_ns_bl1u=fastboot.bin + +- Generate partition table for aosp. The eMMC capacity is either 4GB or 8GB. Just change "aosp-4g" to "linux-4g" for debian. + + .. code:: shell + + $PTABLE=aosp-4g SECTOR_SIZE=512 bash -x generate_ptable.sh + +Setup Console +------------- + +- Install ser2net. Use telnet as the console since UEFI fails to display Boot Manager GUI in minicom. **If you don't need Boot Manager GUI, just ignore this section.** + + .. code:: shell + + $sudo apt-get install ser2net + +- Configure ser2net. + + .. code:: shell + + $sudo vi /etc/ser2net.conf + + Append one line for serial-over-USB in below. + *#ser2net.conf* + + .. code:: shell + + 2004:telnet:0:/dev/ttyUSB0:115200 8DATABITS NONE 1STOPBIT banner + +- Open the console. + + .. code:: shell + + $telnet localhost 2004 + + And you could open the console remotely, too. + +Flush images in recovery mode +----------------------------- + +- Make sure Pin3-Pin4 on J15 are connected for recovery mode. Then power on HiKey. + +- Remove the modemmanager package. This package may cause the idt tool failure. + + .. code:: shell + + $sudo apt-get purge modemmanager + +- Run the command to download l-loader.bin into HiKey. + + .. code:: shell + + $sudo python hisi-idt.py -d /dev/ttyUSB1 --img1 l-loader.bin + +- Update images. All aosp or debian images could be fetched from `link <https://builds.96boards.org/>`__. + + .. code:: shell + + $sudo fastboot flash ptable prm_ptable.img + $sudo fastboot flash fastboot fip.bin + $sudo fastboot flash boot boot.img + $sudo fastboot flash cache cache.img + $sudo fastboot flash system system.img + $sudo fastboot flash userdata userdata.img + +Boot UEFI in normal mode +------------------------ + +- Make sure Pin3-Pin4 on J15 are open for normal boot mode. Then power on HiKey. + +- Reference `link <https://github.com/96boards-hikey/tools-images-hikey960/blob/master/build-from-source/README-ATF-UEFI-build-from-source.md>`__ + +.. _link: https://github.com/96boards/documentation/blob/master/ConsumerEdition/HiKey/Quickstart/README.md |