diff options
author | Kyle Lin <kylelinck@google.com> | 2022-07-07 11:20:50 +0000 |
---|---|---|
committer | Chromeos LUCI <chromeos-scoped@luci-project-accounts.iam.gserviceaccount.com> | 2022-07-08 04:45:29 +0000 |
commit | 97e7110972c274e1b8fbe804030f31422755e4fc (patch) | |
tree | 04263ecd0f9b5d90a013b88866080a8c03cc721d | |
parent | 63f8aface4fc2a59a3125e4ffd0ad459b326576b (diff) | |
download | chrome-ec-stabilize-14964.B-main.tar.gz |
pdeval-stm32f072: Update for inclusive terminologystabilize-14964.B-main
Replace 'slave' with 'target' for more inclusive terminology.
BUG=none
BRANCH=none
TEST=none
Change-Id: I290a3616ddfdcd9993acfd1fbb2eb585d07c1f54
Signed-off-by: Kyle Lin <kylelinck@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3750968
Reviewed-by: Marco Chen <marcochen@chromium.org>
-rw-r--r-- | board/pdeval-stm32f072/PD_evaluation.md | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/board/pdeval-stm32f072/PD_evaluation.md b/board/pdeval-stm32f072/PD_evaluation.md index 4f1c8636c6..fd4763a849 100644 --- a/board/pdeval-stm32f072/PD_evaluation.md +++ b/board/pdeval-stm32f072/PD_evaluation.md @@ -43,12 +43,12 @@ also need to create/delete the corresponding `PD_Cx` tasks in [board/pdeval-stm32f072/ec.tasklist](ec.tasklist). By default, the firmware is using I2C1 with SCL/SDA on pins PB6 and PB7, running -with a 100kHz clock, and tries to talk to TCPCs at i2c slave addresses 0x9c and +with a 100kHz clock, and tries to talk to TCPCs at i2c target addresses 0x9c and 0x9e. To change the pins or speed, you need to edit `i2c_ports` in [board/pdeval-stm32f072/board.c](board.c), update `I2C_PORT_TCPC` in [board/pdeval-stm32f072/board.h](board.h) with the right controller number, and change the pin mux in [board/pdeval-stm32f072/gpio.inc](gpio.inc). To change -TCPC i2c slave addresses, update `TCPC1_I2C_ADDR` and `TCPC2_I2C_ADDR` in +TCPC i2c target addresses, update `TCPC1_I2C_ADDR` and `TCPC2_I2C_ADDR` in [board/pdeval-stm32f072/board.h](board.h). The I2C bus needs pull-up resistors on SCL/SDA. If your setup doesn't have |