diff options
author | Devin Lu <Devin.Lu@quantatw.com> | 2020-10-22 11:32:13 +0800 |
---|---|---|
committer | Commit Bot <commit-bot@chromium.org> | 2020-10-29 01:53:15 +0000 |
commit | 8cd87e78c73a43b6a11919e4b9d9f2a7e063d429 (patch) | |
tree | 06f93fbf1235c7256d3ff87f07ae1da5c3f5b3ca | |
parent | be386fb62ef93ecfb0f369867bfe9c193b178f90 (diff) | |
download | chrome-ec-8cd87e78c73a43b6a11919e4b9d9f2a7e063d429.tar.gz |
elemi: Remove unused board rev 0 configuration
BUG=b:169409487
BRANCH=firmware-volteer-13521.B-master
TEST=Make sure TCPC C1 port initial passed.
Signed-off-by: Devin Lu <Devin.Lu@quantatw.com>
Change-Id: Ib989947f14feccb0ef4eaad8a2fa5556a4061fd6
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2491585
Reviewed-by: Keith Short <keithshort@chromium.org>
-rw-r--r-- | board/elemi/board.c | 16 | ||||
-rw-r--r-- | board/elemi/gpio.inc | 10 |
2 files changed, 3 insertions, 23 deletions
diff --git a/board/elemi/board.c b/board/elemi/board.c index 96e0ec51a2..82ddcca710 100644 --- a/board/elemi/board.c +++ b/board/elemi/board.c @@ -325,16 +325,14 @@ const int usb_port_enable[USB_PORT_COUNT] = { GPIO_EN_PP5000_USBA, }; -static enum gpio_signal ps8xxx_rst_odl = GPIO_USB_C1_RT_RST_ODL; - static void ps8815_reset(void) { int val; - gpio_set_level(ps8xxx_rst_odl, 0); + gpio_set_level(GPIO_USB_C1_RT_RST_ODL, 0); msleep(GENERIC_MAX(PS8XXX_RESET_DELAY_MS, PS8815_PWR_H_RST_H_DELAY_MS)); - gpio_set_level(ps8xxx_rst_odl, 1); + gpio_set_level(GPIO_USB_C1_RT_RST_ODL, 1); msleep(PS8815_FW_INIT_DELAY_MS); /* @@ -425,16 +423,6 @@ __override void board_cbi_init(void) { enum ec_cfg_usb_db_type usb_db = ec_cfg_usb_db_type(); - /* Reconfigure Volteer GPIOs based on the board ID */ - if (get_board_id() == 0) { - CPRINTS("Configuring GPIOs for board ID 0"); - CPRINTS("VOLUME_UP button disabled"); - - /* Reassign USB_C1_RT_RST_ODL */ - bb_controls[USBC_PORT_C1].retimer_rst_gpio = - GPIO_USB_C1_RT_RST_ODL_BOARDID_0; - ps8xxx_rst_odl = GPIO_USB_C1_RT_RST_ODL_BOARDID_0; - } config_port_discrete_tcpc(0); switch (usb_db) { case DB_USB_ABSENT: diff --git a/board/elemi/gpio.inc b/board/elemi/gpio.inc index 4c7a137e76..aa4dbba6f7 100644 --- a/board/elemi/gpio.inc +++ b/board/elemi/gpio.inc @@ -84,15 +84,7 @@ GPIO(EC_PCH_INT_ODL, PIN(B, 0), GPIO_ODR_HIGH) /* USB and USBC Signals */ GPIO(EN_PP5000_USBA, PIN(C, 6), GPIO_OUT_LOW) /* Enable USB-A charging - all ports */ GPIO(USB_A_LOW_PWR_OD, PIN(6, 6), GPIO_ODR_LOW) /* Don't limit USB-A charging by default - all ports */ - -/* - * USB_C1 moved from GPIO32 to GPIO83 on boards with board ID >=1. - * GPIO83/EN_PP1800_A is DNS on board ID 0 and GPIO32 is N/C on board ID >=1 - * so it's safe to define GPIOs compatible with both designs. - * TODO (b/149858568): remove board ID=0 support. - */ -GPIO(USB_C1_RT_RST_ODL_BOARDID_0, PIN(3, 2), GPIO_ODR_LOW) /* USB_C1 Reset on boards without board ID */ -GPIO(USB_C1_RT_RST_ODL, PIN(8, 3), GPIO_ODR_LOW) /* USB_C1 Reset on boards board ID >=1 */ +GPIO(USB_C1_RT_RST_ODL, PIN(8, 3), GPIO_ODR_LOW) /* USB_C1 Reset */ GPIO(USB_C0_OC_ODL, PIN(B, 1), GPIO_ODR_HIGH) GPIO(USB_C1_OC_ODL, PIN(5, 0), GPIO_ODR_HIGH) /* There is currently no need to service this interrupt. */ |